Merge tag 'arm64-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64

Pull arm64 support from Catalin Marinas:
 "Linux support for the 64-bit ARM architecture (AArch64)

  Features currently supported:
   - 39-bit address space for user and kernel (each)
   - 4KB and 64KB page configurations
   - Compat (32-bit) user applications (ARMv7, EABI only)
   - Flattened Device Tree (mandated for all AArch64 platforms)
   - ARM generic timers"

* tag 'arm64-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: (35 commits)
  arm64: ptrace: remove obsolete ptrace request numbers from user headers
  arm64: Do not set the SMP/nAMP processor bit
  arm64: MAINTAINERS update
  arm64: Build infrastructure
  arm64: Miscellaneous header files
  arm64: Generic timers support
  arm64: Loadable modules
  arm64: Miscellaneous library functions
  arm64: Performance counters support
  arm64: Add support for /proc/sys/debug/exception-trace
  arm64: Debugging support
  arm64: Floating point and SIMD
  arm64: 32-bit (compat) applications support
  arm64: User access library functions
  arm64: Signal handling support
  arm64: VDSO support
  arm64: System calls handling
  arm64: ELF definitions
  arm64: SMP support
  arm64: DMA mapping API
  ...

3 files changed, 238 insertions, 0 deletions

diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index d53cd0afc200..6a78073c3808 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -35,3 +35,8 @@ config CLKSRC_DBX500_PRCMU_SCHED_CLOCK
 	default y
 	help
 	  Use the always on PRCMU Timer as sched_clock
+
+config CLKSRC_ARM_GENERIC
+	def_bool y if ARM64
+	help
+	  This option enables support for the ARM generic timer.
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index b65d0c56ab35..65919901a301 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -13,3 +13,4 @@ obj-$(CONFIG_DW_APB_TIMER)	+= dw_apb_timer.o
 obj-$(CONFIG_DW_APB_TIMER_OF)	+= dw_apb_timer_of.o
 obj-$(CONFIG_CLKSRC_DBX500_PRCMU)	+= clksrc-dbx500-prcmu.o
 obj-$(CONFIG_ARMADA_370_XP_TIMER)	+= time-armada-370-xp.o
+obj-$(CONFIG_CLKSRC_ARM_GENERIC)	+= arm_generic.o
diff --git a/drivers/clocksource/arm_generic.c b/drivers/clocksource/arm_generic.c
new file mode 100644
index 000000000000..c4d9f9566c64
--- /dev/null
+++ b/drivers/clocksource/arm_generic.c
@@ -0,0 +1,232 @@
+/*
+ * Generic timers support
+ *
+ * Copyright (C) 2012 ARM Ltd.
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/smp.h>
+#include <linux/cpu.h>
+#include <linux/jiffies.h>
+#include <linux/interrupt.h>
+#include <linux/clockchips.h>
+#include <linux/of_irq.h>
+#include <linux/io.h>
+
+#include <clocksource/arm_generic.h>
+
+#include <asm/arm_generic.h>
+
+static u32 arch_timer_rate;
+static u64 sched_clock_mult __read_mostly;
+static DEFINE_PER_CPU(struct clock_event_device, arch_timer_evt);
+static int arch_timer_ppi;
+
+static irqreturn_t arch_timer_handle_irq(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = dev_id;
+	unsigned long ctrl;
+
+	ctrl = arch_timer_reg_read(ARCH_TIMER_REG_CTRL);
+	if (ctrl & ARCH_TIMER_CTRL_ISTATUS) {
+		ctrl |= ARCH_TIMER_CTRL_IMASK;
+		arch_timer_reg_write(ARCH_TIMER_REG_CTRL, ctrl);
+		evt->event_handler(evt);
+		return IRQ_HANDLED;
+	}
+
+	return IRQ_NONE;
+}
+
+static void arch_timer_stop(void)
+{
+	unsigned long ctrl;
+
+	ctrl = arch_timer_reg_read(ARCH_TIMER_REG_CTRL);
+	ctrl &= ~ARCH_TIMER_CTRL_ENABLE;
+	arch_timer_reg_write(ARCH_TIMER_REG_CTRL, ctrl);
+}
+
+static void arch_timer_set_mode(enum clock_event_mode mode,
+				struct clock_event_device *clk)
+{
+	switch (mode) {
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+		arch_timer_stop();
+		break;
+	default:
+		break;
+	}
+}
+
+static int arch_timer_set_next_event(unsigned long evt,
+				     struct clock_event_device *unused)
+{
+	unsigned long ctrl;
+
+	ctrl = arch_timer_reg_read(ARCH_TIMER_REG_CTRL);
+	ctrl |= ARCH_TIMER_CTRL_ENABLE;
+	ctrl &= ~ARCH_TIMER_CTRL_IMASK;
+
+	arch_timer_reg_write(ARCH_TIMER_REG_TVAL, evt);
+	arch_timer_reg_write(ARCH_TIMER_REG_CTRL, ctrl);
+
+	return 0;
+}
+
+static void __cpuinit arch_timer_setup(struct clock_event_device *clk)
+{
+	/* Let's make sure the timer is off before doing anything else */
+	arch_timer_stop();
+
+	clk->features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_C3STOP;
+	clk->name = "arch_sys_timer";
+	clk->rating = 400;
+	clk->set_mode = arch_timer_set_mode;
+	clk->set_next_event = arch_timer_set_next_event;
+	clk->irq = arch_timer_ppi;
+	clk->cpumask = cpumask_of(smp_processor_id());
+
+	clockevents_config_and_register(clk, arch_timer_rate,
+					0xf, 0x7fffffff);
+
+	enable_percpu_irq(clk->irq, 0);
+
+	/* Ensure the physical counter is visible to userspace for the vDSO. */
+	arch_counter_enable_user_access();
+}
+
+static void __init arch_timer_calibrate(void)
+{
+	if (arch_timer_rate == 0) {
+		arch_timer_reg_write(ARCH_TIMER_REG_CTRL, 0);
+		arch_timer_rate = arch_timer_reg_read(ARCH_TIMER_REG_FREQ);
+
+		/* Check the timer frequency. */
+		if (arch_timer_rate == 0)
+			panic("Architected timer frequency is set to zero.\n"
+			      "You must set this in your .dts file\n");
+	}
+
+	/* Cache the sched_clock multiplier to save a divide in the hot path. */
+
+	sched_clock_mult = NSEC_PER_SEC / arch_timer_rate;
+
+	pr_info("Architected local timer running at %u.%02uMHz.\n",
+		 arch_timer_rate / 1000000, (arch_timer_rate / 10000) % 100);
+}
+
+static cycle_t arch_counter_read(struct clocksource *cs)
+{
+	return arch_counter_get_cntpct();
+}
+
+static struct clocksource clocksource_counter = {
+	.name	= "arch_sys_counter",
+	.rating	= 400,
+	.read	= arch_counter_read,
+	.mask	= CLOCKSOURCE_MASK(56),
+	.flags	= (CLOCK_SOURCE_IS_CONTINUOUS | CLOCK_SOURCE_VALID_FOR_HRES),
+};
+
+int read_current_timer(unsigned long *timer_value)
+{
+	*timer_value = arch_counter_get_cntpct();
+	return 0;
+}
+
+unsigned long long notrace sched_clock(void)
+{
+	return arch_counter_get_cntvct() * sched_clock_mult;
+}
+
+static int __cpuinit arch_timer_cpu_notify(struct notifier_block *self,
+					   unsigned long action, void *hcpu)
+{
+	int cpu = (long)hcpu;
+	struct clock_event_device *clk = per_cpu_ptr(&arch_timer_evt, cpu);
+
+	switch(action) {
+	case CPU_STARTING:
+	case CPU_STARTING_FROZEN:
+		arch_timer_setup(clk);
+		break;
+
+	case CPU_DYING:
+	case CPU_DYING_FROZEN:
+		pr_debug("arch_timer_teardown disable IRQ%d cpu #%d\n",
+			 clk->irq, cpu);
+		disable_percpu_irq(clk->irq);
+		arch_timer_set_mode(CLOCK_EVT_MODE_UNUSED, clk);
+		break;
+	}
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block __cpuinitdata arch_timer_cpu_nb = {
+	.notifier_call = arch_timer_cpu_notify,
+};
+
+static const struct of_device_id arch_timer_of_match[] __initconst = {
+	{ .compatible = "arm,armv8-timer" },
+	{},
+};
+
+int __init arm_generic_timer_init(void)
+{
+	struct device_node *np;
+	int err;
+	u32 freq;
+
+	np = of_find_matching_node(NULL, arch_timer_of_match);
+	if (!np) {
+		pr_err("arch_timer: can't find DT node\n");
+		return -ENODEV;
+	}
+
+	/* Try to determine the frequency from the device tree or CNTFRQ */
+	if (!of_property_read_u32(np, "clock-frequency", &freq))
+		arch_timer_rate = freq;
+	arch_timer_calibrate();
+
+	arch_timer_ppi = irq_of_parse_and_map(np, 0);
+	pr_info("arch_timer: found %s irq %d\n", np->name, arch_timer_ppi);
+
+	err = request_percpu_irq(arch_timer_ppi, arch_timer_handle_irq,
+				 np->name, &arch_timer_evt);
+	if (err) {
+		pr_err("arch_timer: can't register interrupt %d (%d)\n",
+		       arch_timer_ppi, err);
+		return err;
+	}
+
+	clocksource_register_hz(&clocksource_counter, arch_timer_rate);
+
+	/* Calibrate the delay loop directly */
+	lpj_fine = arch_timer_rate / HZ;
+
+	/* Immediately configure the timer on the boot CPU */
+	arch_timer_setup(per_cpu_ptr(&arch_timer_evt, smp_processor_id()));
+
+	register_cpu_notifier(&arch_timer_cpu_nb);
+
+	return 0;
+}