summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2008-05-10 21:14:05 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2008-05-10 21:14:05 -0700
commit5bb7ff795fffc9418e3039cac77b42adcaae1a57 (patch)
treec6dca94cc723a0079d04d254e0407e85c1980c66 /drivers
parent3e1b83ab3912a6f583897635bee0a2e0cd1545f7 (diff)
parent1f2ee6496b1f71e9d5aa2448745e65fbafdc3bd5 (diff)
Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 5033/1: Unbreak corgi_ssp by registering ssp drivers earlier. [ARM] Orion: clean up addr-map.c after window setting code purge [ARM] Orion: pass proper t_clk into mv643xx_eth [ARM] Orion: use mv643xx_eth driver mbus window handling [ARM] pxa: Fix RCSR handling [ARM] lubbock: fix compilation [ARM] 5032/1: Added cpufreq support for pxa27x CPU [ARM] 5031/1: Indentation correction in cpu-pxa.c. [ARM] 5028/1: pxafb: fix broken "backward compatibility way" in framebuffer [ARM] 4882/2: Correction for S3C2410 clkout generation [ARM] 5027/1: Fixed random memory corruption on pxa suspend cycle. [ARM] 5024/1: Fix some minor clk issues in the MMCI PL18x driver [ARM] 5023/1: Fix broken gpio interrupts on ep93xx ns9xxx: fix sparse warning ns9xxx: check for irq lockups ns9xxx: fix handle_prio_irq to unmask irqs with lower priority
Diffstat (limited to 'drivers')
-rw-r--r--drivers/mmc/host/mmci.c14
-rw-r--r--drivers/video/pxafb.c8
2 files changed, 17 insertions, 5 deletions
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 626ac083f4e0..da5fecad74d9 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -425,7 +425,7 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
host->cclk = host->mclk;
} else {
clk = host->mclk / (2 * ios->clock) - 1;
- if (clk > 256)
+ if (clk >= 256)
clk = 255;
host->cclk = host->mclk / (2 * (clk + 1));
}
@@ -512,6 +512,18 @@ static int mmci_probe(struct amba_device *dev, void *id)
host->plat = plat;
host->mclk = clk_get_rate(host->clk);
+ /*
+ * According to the spec, mclk is max 100 MHz,
+ * so we try to adjust the clock down to this,
+ * (if possible).
+ */
+ if (host->mclk > 100000000) {
+ ret = clk_set_rate(host->clk, 100000000);
+ if (ret < 0)
+ goto clk_disable;
+ host->mclk = clk_get_rate(host->clk);
+ DBG(host, "eventual mclk rate: %u Hz\n", host->mclk);
+ }
host->mmc = mmc;
host->base = ioremap(dev->res.start, SZ_4K);
if (!host->base) {
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 3ab6e3d973a1..48aea39c35a5 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -1301,8 +1301,8 @@ static void pxafb_decode_mode_info(struct pxafb_info *fbi,
}
}
-static int pxafb_decode_mach_info(struct pxafb_info *fbi,
- struct pxafb_mach_info *inf)
+static void pxafb_decode_mach_info(struct pxafb_info *fbi,
+ struct pxafb_mach_info *inf)
{
unsigned int lcd_conn = inf->lcd_conn;
@@ -1333,7 +1333,7 @@ static int pxafb_decode_mach_info(struct pxafb_info *fbi,
fbi->lccr0 = inf->lccr0;
fbi->lccr3 = inf->lccr3;
fbi->lccr4 = inf->lccr4;
- return -EINVAL;
+ goto decode_mode;
}
if (lcd_conn == LCD_MONO_STN_8BPP)
@@ -1343,8 +1343,8 @@ static int pxafb_decode_mach_info(struct pxafb_info *fbi,
fbi->lccr3 |= (lcd_conn & LCD_BIAS_ACTIVE_LOW) ? LCCR3_OEP : 0;
fbi->lccr3 |= (lcd_conn & LCD_PCLK_EDGE_FALL) ? LCCR3_PCP : 0;
+decode_mode:
pxafb_decode_mode_info(fbi, inf->modes, inf->num_modes);
- return 0;
}
static struct pxafb_info * __init pxafb_init_fbinfo(struct device *dev)