Staging: et131x: tidy up initpci code

Perform some easy tidying so we can see what needs to be done next

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

3 files changed, 192 insertions, 252 deletions

diff --git a/drivers/staging/et131x/et131x_initpci.c b/drivers/staging/et131x/et131x_initpci.c
index 363162cf9881..7b1e912f3ab2 100644
--- a/drivers/staging/et131x/et131x_initpci.c
+++ b/drivers/staging/et131x/et131x_initpci.c
@@ -132,16 +132,60 @@ MODULE_PARM_DESC(et131x_speed_set,
 		"Set Link speed and dublex manually (0-5)  [0] \n  1 : 10Mb   Half-Duplex \n  2 : 10Mb   Full-Duplex \n  3 : 100Mb  Half-Duplex \n  4 : 100Mb  Full-Duplex \n  5 : 1000Mb Full-Duplex \n 0 : Auto Speed Auto Dublex");
 
 /**
- * et131x_find_adapter - Find the adapter and get all the assigned resources
+ * et131x_hwaddr_init - set up the MAC Address on the ET1310
  * @adapter: pointer to our private adapter structure
+ */
+void et131x_hwaddr_init(struct et131x_adapter *adapter)
+{
+	/* If have our default mac from init and no mac address from
+	 * EEPROM then we need to generate the last octet and set it on the
+	 * device
+	 */
+	if (adapter->PermanentAddress[0] == 0x00 &&
+	    adapter->PermanentAddress[1] == 0x00 &&
+	    adapter->PermanentAddress[2] == 0x00 &&
+	    adapter->PermanentAddress[3] == 0x00 &&
+	    adapter->PermanentAddress[4] == 0x00 &&
+	    adapter->PermanentAddress[5] == 0x00) {
+		/*
+		 * We need to randomly generate the last octet so we
+		 * decrease our chances of setting the mac address to
+		 * same as another one of our cards in the system
+		 */
+		get_random_bytes(&adapter->CurrentAddress[5], 1);
+		/*
+		 * We have the default value in the register we are
+		 * working with so we need to copy the current
+		 * address into the permanent address
+		 */
+		memcpy(adapter->PermanentAddress,
+			adapter->CurrentAddress, ETH_ALEN);
+	} else {
+		/* We do not have an override address, so set the
+		 * current address to the permanent address and add
+		 * it to the device
+		 */
+		memcpy(adapter->CurrentAddress,
+		       adapter->PermanentAddress, ETH_ALEN);
+	}
+}
+
+
+/**
+ * et131x_pci_init	 - initial PCI setup
+ * @adapter: pointer to our private adapter structure
+ * @pdev: our PCI device
  *
- * Returns 0 on success, errno on failure (as defined in errno.h)
+ * Perform the initial setup of PCI registers and if possible initialise
+ * the MAC address. At this point the I/O registers have yet to be mapped
  */
-int et131x_find_adapter(struct et131x_adapter *adapter, struct pci_dev *pdev)
+
+static int et131x_pci_init(struct et131x_adapter *adapter,
+						struct pci_dev *pdev)
 {
-	int result;
-	uint8_t maxPayload = 0;
-	uint8_t read_size_reg;
+	int i;
+	u8 max_payload;
+	u8 read_size_reg;
 
 	/* Allow disabling of Non-Maskable Interrupts in I/O space, to
 	 * support validation.
@@ -164,31 +208,27 @@ int et131x_find_adapter(struct et131x_adapter *adapter, struct pci_dev *pdev)
 	/* Let's set up the PORT LOGIC Register.  First we need to know what
 	 * the max_payload_size is
 	 */
-	result = pci_read_config_byte(pdev, ET1310_PCI_MAX_PYLD, &maxPayload);
-	if (result != PCIBIOS_SUCCESSFUL) {
+	if (pci_read_config_byte(pdev, ET1310_PCI_MAX_PYLD, &max_payload)) {
 		dev_err(&pdev->dev,
 		    "Could not read PCI config space for Max Payload Size\n");
 		return -EIO;
 	}
 
 	/* Program the Ack/Nak latency and replay timers */
-	maxPayload &= 0x07;	/* Only the lower 3 bits are valid */
+	max_payload &= 0x07;	/* Only the lower 3 bits are valid */
 
-	if (maxPayload < 2) {
-		const uint16_t AckNak[2] = { 0x76, 0xD0 };
-		const uint16_t Replay[2] = { 0x1E0, 0x2ED };
+	if (max_payload < 2) {
+		static const u16 AckNak[2] = { 0x76, 0xD0 };
+		static const u16 Replay[2] = { 0x1E0, 0x2ED };
 
-		result = pci_write_config_word(pdev, ET1310_PCI_ACK_NACK,
-					       AckNak[maxPayload]);
-		if (result != PCIBIOS_SUCCESSFUL) {
+		if (pci_write_config_word(pdev, ET1310_PCI_ACK_NACK,
+					       AckNak[max_payload])) {
 			dev_err(&pdev->dev,
 			  "Could not write PCI config space for ACK/NAK\n");
 			return -EIO;
 		}
-
-		result = pci_write_config_word(pdev, ET1310_PCI_REPLAY,
-					       Replay[maxPayload]);
-		if (result != PCIBIOS_SUCCESSFUL) {
+		if (pci_write_config_word(pdev, ET1310_PCI_REPLAY,
+					       Replay[max_payload])) {
 			dev_err(&pdev->dev,
 			  "Could not write PCI config space for Replay Timer\n");
 			return -EIO;
@@ -198,16 +238,14 @@ int et131x_find_adapter(struct et131x_adapter *adapter, struct pci_dev *pdev)
 	/* l0s and l1 latency timers.  We are using default values.
 	 * Representing 001 for L0s and 010 for L1
 	 */
-	result = pci_write_config_byte(pdev, ET1310_PCI_L0L1LATENCY, 0x11);
-	if (result != PCIBIOS_SUCCESSFUL) {
+	if (pci_write_config_byte(pdev, ET1310_PCI_L0L1LATENCY, 0x11)) {
 		dev_err(&pdev->dev,
 		  "Could not write PCI config space for Latency Timers\n");
 		return -EIO;
 	}
 
 	/* Change the max read size to 2k */
-	result = pci_read_config_byte(pdev, 0x51, &read_size_reg);
-	if (result != PCIBIOS_SUCCESSFUL) {
+	if (pci_read_config_byte(pdev, 0x51, &read_size_reg)) {
 		dev_err(&pdev->dev,
 			"Could not read PCI config space for Max read size\n");
 		return -EIO;
@@ -216,8 +254,7 @@ int et131x_find_adapter(struct et131x_adapter *adapter, struct pci_dev *pdev)
 	read_size_reg &= 0x8f;
 	read_size_reg |= 0x40;
 
-	result = pci_write_config_byte(pdev, 0x51, read_size_reg);
-	if (result != PCIBIOS_SUCCESSFUL) {
+	if (pci_write_config_byte(pdev, 0x51, read_size_reg)) {
 		dev_err(&pdev->dev,
 		      "Could not write PCI config space for Max read size\n");
 		return -EIO;
@@ -226,19 +263,19 @@ int et131x_find_adapter(struct et131x_adapter *adapter, struct pci_dev *pdev)
 	/* Get MAC address from config space if an eeprom exists, otherwise
 	 * the MAC address there will not be valid
 	 */
-	if (adapter->has_eeprom) {
-		int i;
-
-		for (i = 0; i < ETH_ALEN; i++) {
-			result = pci_read_config_byte(
-					pdev, ET1310_PCI_MAC_ADDRESS + i,
-					adapter->PermanentAddress + i);
-			if (result != PCIBIOS_SUCCESSFUL) {
-				dev_err(&pdev->dev, ";Could not read PCI config space for MAC address\n");
-				return -EIO;
-			}
+	if (!adapter->has_eeprom) {
+		et131x_hwaddr_init(adapter);
+		return 0;
+	}
+
+	for (i = 0; i < ETH_ALEN; i++) {
+		if (pci_read_config_byte(pdev, ET1310_PCI_MAC_ADDRESS + i,
+					adapter->PermanentAddress + i)) {
+			dev_err(&pdev->dev, "Could not read PCI config space for MAC address\n");
+			return -EIO;
 		}
 	}
+	memcpy(adapter->CurrentAddress, adapter->PermanentAddress, ETH_ALEN);
 	return 0;
 }
 
@@ -433,45 +470,6 @@ int et131x_adapter_setup(struct et131x_adapter *etdev)
 }
 
 /**
- * et131x_setup_hardware_properties - set up the MAC Address on the ET1310
- * @adapter: pointer to our private adapter structure
- */
-void et131x_setup_hardware_properties(struct et131x_adapter *adapter)
-{
-	/* If have our default mac from registry and no mac address from
-	 * EEPROM then we need to generate the last octet and set it on the
-	 * device
-	 */
-	if (adapter->PermanentAddress[0] == 0x00 &&
-	    adapter->PermanentAddress[1] == 0x00 &&
-	    adapter->PermanentAddress[2] == 0x00 &&
-	    adapter->PermanentAddress[3] == 0x00 &&
-	    adapter->PermanentAddress[4] == 0x00 &&
-	    adapter->PermanentAddress[5] == 0x00) {
-		/*
-		 * We need to randomly generate the last octet so we
-		 * decrease our chances of setting the mac address to
-		 * same as another one of our cards in the system
-		 */
-		get_random_bytes(&adapter->CurrentAddress[5], 1);
-		/*
-		 * We have the default value in the register we are
-		 * working with so we need to copy the current
-		 * address into the permanent address
-		 */
-		memcpy(adapter->PermanentAddress,
-			adapter->CurrentAddress, ETH_ALEN);
-	} else {
-		/* We do not have an override address, so set the
-		 * current address to the permanent address and add
-		 * it to the device
-		 */
-		memcpy(adapter->CurrentAddress,
-		       adapter->PermanentAddress, ETH_ALEN);
-	}
-}
-
-/**
  * et131x_soft_reset - Issue a soft reset to the hardware, complete for ET1310
  * @adapter: pointer to our private adapter structure
  */
@@ -523,36 +521,32 @@ void et131x_align_allocated_memory(struct et131x_adapter *adapter,
  */
 int et131x_adapter_memory_alloc(struct et131x_adapter *adapter)
 {
-	int status = 0;
-
-	do {
-		/* Allocate memory for the Tx Ring */
-		status = et131x_tx_dma_memory_alloc(adapter);
-		if (status != 0) {
-			dev_err(&adapter->pdev->dev,
-				  "et131x_tx_dma_memory_alloc FAILED\n");
-			break;
-		}
+	int status;
 
-		/* Receive buffer memory allocation */
-		status = et131x_rx_dma_memory_alloc(adapter);
-		if (status != 0) {
-			dev_err(&adapter->pdev->dev,
-				  "et131x_rx_dma_memory_alloc FAILED\n");
-			et131x_tx_dma_memory_free(adapter);
-			break;
-		}
+	/* Allocate memory for the Tx Ring */
+	status = et131x_tx_dma_memory_alloc(adapter);
+	if (status != 0) {
+		dev_err(&adapter->pdev->dev,
+			  "et131x_tx_dma_memory_alloc FAILED\n");
+		return status;
+	}
+	/* Receive buffer memory allocation */
+	status = et131x_rx_dma_memory_alloc(adapter);
+	if (status != 0) {
+		dev_err(&adapter->pdev->dev,
+			  "et131x_rx_dma_memory_alloc FAILED\n");
+		et131x_tx_dma_memory_free(adapter);
+		return status;
+	}
 
-		/* Init receive data structures */
-		status = et131x_init_recv(adapter);
-		if (status != 0) {
-			dev_err(&adapter->pdev->dev,
-				"et131x_init_recv FAILED\n");
-			et131x_tx_dma_memory_free(adapter);
-			et131x_rx_dma_memory_free(adapter);
-			break;
-		}
-	} while (0);
+	/* Init receive data structures */
+	status = et131x_init_recv(adapter);
+	if (status != 0) {
+		dev_err(&adapter->pdev->dev,
+			"et131x_init_recv FAILED\n");
+		et131x_tx_dma_memory_free(adapter);
+		et131x_rx_dma_memory_free(adapter);
+	}
 	return status;
 }
 
@@ -567,22 +561,51 @@ void et131x_adapter_memory_free(struct et131x_adapter *adapter)
 	et131x_rx_dma_memory_free(adapter);
 }
 
+
+
 /**
- * et131x_config_parse
+ * et131x_adapter_init
  * @etdev: pointer to the private adapter struct
+ * @pdev: pointer to the PCI device
  *
- * Parses a configuration from some location (module parameters, for example)
- * into the private adapter struct. This really has no sensible analogy in
- * Linux as sysfs parameters are dynamic. Several things that were hee could
- * go into sysfs, but other stuff like speed handling is part of the mii
- * interfaces/ethtool.
+ * Initialize the data structures for the et131x_adapter object and link
+ * them together with the platform provided device structures.
  */
-void et131x_config_parse(struct et131x_adapter *etdev)
+
+
+static struct et131x_adapter *et131x_adapter_init(struct net_device *netdev,
+		struct pci_dev *pdev)
 {
 	static const u8 default_mac[] = { 0x00, 0x05, 0x3d, 0x00, 0x02, 0x00 };
 	static const u8 duplex[] = { 0, 1, 2, 1, 2, 2 };
 	static const u16 speed[] = { 0, 10, 10, 100, 100, 1000 };
 
+	struct et131x_adapter *etdev;
+
+	/* Setup the fundamental net_device and private adapter structure elements  */
+	SET_NETDEV_DEV(netdev, &pdev->dev);
+
+	/* Allocate private adapter struct and copy in relevant information */
+	etdev = netdev_priv(netdev);
+	etdev->pdev = pci_dev_get(pdev);
+	etdev->netdev = netdev;
+
+	/* Do the same for the netdev struct */
+	netdev->irq = pdev->irq;
+	netdev->base_addr = pci_resource_start(pdev, 0);
+
+	/* Initialize spinlocks here */
+	spin_lock_init(&etdev->Lock);
+	spin_lock_init(&etdev->TCBSendQLock);
+	spin_lock_init(&etdev->TCBReadyQLock);
+	spin_lock_init(&etdev->SendHWLock);
+	spin_lock_init(&etdev->SendWaitLock);
+	spin_lock_init(&etdev->RcvLock);
+	spin_lock_init(&etdev->RcvPendLock);
+	spin_lock_init(&etdev->FbrLock);
+	spin_lock_init(&etdev->PHYLock);
+
+	/* Parse configuration parameters into the private adapter struct */
 	if (et131x_speed_set)
 		dev_info(&etdev->pdev->dev,
 			"Speed set manually to : %d \n", et131x_speed_set);
@@ -609,40 +632,10 @@ void et131x_config_parse(struct et131x_adapter *etdev)
 
 	etdev->AiForceSpeed = speed[etdev->SpeedDuplex];
 	etdev->AiForceDpx = duplex[etdev->SpeedDuplex];	/* Auto FDX */
-}
-
 
-/**
- * et131x_pci_remove
- * @pdev: a pointer to the device's pci_dev structure
- *
- * Registered in the pci_driver structure, this function is called when the
- * PCI subsystem detects that a PCI device which matches the information
- * contained in the pci_device_id table has been removed.
- */
-
-void __devexit et131x_pci_remove(struct pci_dev *pdev)
-{
-	struct net_device *netdev;
-	struct et131x_adapter *adapter;
-
-	/* Retrieve the net_device pointer from the pci_dev struct, as well
-	 * as the private adapter struct
-	 */
-	netdev = (struct net_device *) pci_get_drvdata(pdev);
-	adapter = netdev_priv(netdev);
-
-	/* Perform device cleanup */
-	unregister_netdev(netdev);
-	et131x_adapter_memory_free(adapter);
-	iounmap(adapter->regs);
-	pci_dev_put(adapter->pdev);
-	free_netdev(netdev);
-	pci_release_regions(pdev);
-	pci_disable_device(pdev);
+	return etdev;
 }
 
-
 /**
  * et131x_pci_setup - Perform device initialization
  * @pdev: a pointer to the device's pci_dev structure
@@ -656,34 +649,31 @@ void __devexit et131x_pci_remove(struct pci_dev *pdev)
  * a device insertion routine.
  */
 
-int __devinit et131x_pci_setup(struct pci_dev *pdev,
+static int __devinit et131x_pci_setup(struct pci_dev *pdev,
 			       const struct pci_device_id *ent)
 {
-	int result = 0;
+	int result = -EBUSY;
 	int pm_cap;
 	bool pci_using_dac;
-	struct net_device *netdev = NULL;
-	struct et131x_adapter *adapter = NULL;
+	struct net_device *netdev;
+	struct et131x_adapter *adapter;
 
 	/* Enable the device via the PCI subsystem */
-	result = pci_enable_device(pdev);
-	if (result != 0) {
-		dev_err(&adapter->pdev->dev,
+	if (pci_enable_device(pdev) != 0) {
+		dev_err(&pdev->dev,
 			"pci_enable_device() failed\n");
-		goto out;
+		return -EIO;
 	}
 
 	/* Perform some basic PCI checks */
 	if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
-		dev_err(&adapter->pdev->dev,
+		dev_err(&pdev->dev,
 			  "Can't find PCI device's base address\n");
-		result = -ENODEV;
-		goto out;
+		goto err_disable;
 	}
 
-	result = pci_request_regions(pdev, DRIVER_NAME);
-	if (result != 0) {
-		dev_err(&adapter->pdev->dev,
+	if (pci_request_regions(pdev, DRIVER_NAME)) {
+		dev_err(&pdev->dev,
 			"Can't get PCI resources\n");
 		goto err_disable;
 	}
@@ -698,27 +688,26 @@ int __devinit et131x_pci_setup(struct pci_dev *pdev,
 	 */
 	pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM);
 	if (pm_cap == 0) {
-		dev_err(&adapter->pdev->dev,
+		dev_err(&pdev->dev,
 			  "Cannot find Power Management capabilities\n");
 		result = -EIO;
 		goto err_release_res;
 	}
 
 	/* Check the DMA addressing support of this device */
-	if (!pci_set_dma_mask(pdev, 0xffffffffffffffffULL)) {
+	if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
 		pci_using_dac = true;
 
-		result =
-		    pci_set_consistent_dma_mask(pdev, 0xffffffffffffffffULL);
+		result = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
 		if (result != 0) {
 			dev_err(&pdev->dev,
 				  "Unable to obtain 64 bit DMA for consistent allocations\n");
 			goto err_release_res;
 		}
-	} else if (!pci_set_dma_mask(pdev, 0xffffffffULL)) {
+	} else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
 		pci_using_dac = false;
 	} else {
-		dev_err(&adapter->pdev->dev,
+		dev_err(&pdev->dev,
 			"No usable DMA addressing method\n");
 		result = -EIO;
 		goto err_release_res;
@@ -727,87 +716,22 @@ int __devinit et131x_pci_setup(struct pci_dev *pdev,
 	/* Allocate netdev and private adapter structs */
 	netdev = et131x_device_alloc();
 	if (netdev == NULL) {
-		dev_err(&adapter->pdev->dev,
-			"Couldn't alloc netdev struct\n");
+		dev_err(&pdev->dev, "Couldn't alloc netdev struct\n");
 		result = -ENOMEM;
 		goto err_release_res;
 	}
-
-	/* Setup the fundamental net_device and private adapter structure elements  */
-	SET_NETDEV_DEV(netdev, &pdev->dev);
-	/*
-	if (pci_using_dac) {
-		netdev->features |= NETIF_F_HIGHDMA;
-	}
-	*/
-
-	/*
-	 * NOTE - Turn this on when we're ready to deal with SG-DMA
-	 *
-	 * NOTE: According to "Linux Device Drivers", 3rd ed, Rubini et al,
-	 * if checksumming is not performed in HW, then the kernel will not
-	 * use SG.
-	 * From pp 510-511:
-	 *
-	 * "Note that the kernel does not perform scatter/gather I/O to your
-	 * device if it does not also provide some form of checksumming as
-	 * well. The reason is that, if the kernel has to make a pass over a
-	 * fragmented ("nonlinear") packet to calculate the checksum, it
-	 * might as well copy the data and coalesce the packet at the same
-	 * time."
-	 *
-	 * This has been verified by setting the flags below and still not
-	 * receiving a scattered buffer from the network stack, so leave it
-	 * off until checksums are calculated in HW.
-	 */
-	/* netdev->features |= NETIF_F_SG; */
-	/* netdev->features |= NETIF_F_NO_CSUM; */
-	/* netdev->features |= NETIF_F_LLTX; */
-
-	/* Allocate private adapter struct and copy in relevant information */
-	adapter = netdev_priv(netdev);
-	adapter->pdev = pci_dev_get(pdev);
-	adapter->netdev = netdev;
-
-	/* Do the same for the netdev struct */
-	netdev->irq = pdev->irq;
-	netdev->base_addr = pdev->resource[0].start;
-
-	/* Initialize spinlocks here */
-	spin_lock_init(&adapter->Lock);
-	spin_lock_init(&adapter->TCBSendQLock);
-	spin_lock_init(&adapter->TCBReadyQLock);
-	spin_lock_init(&adapter->SendHWLock);
-	spin_lock_init(&adapter->SendWaitLock);
-	spin_lock_init(&adapter->RcvLock);
-	spin_lock_init(&adapter->RcvPendLock);
-	spin_lock_init(&adapter->FbrLock);
-	spin_lock_init(&adapter->PHYLock);
-
-	/* Parse configuration parameters into the private adapter struct */
-	et131x_config_parse(adapter);
-
-	/* Find the physical adapter
-	 *
-	 * NOTE: This is the equivalent of the MpFindAdapter() routine; can we
-	 *       lump it's init with the device specific init below into a
-	 *       single init function?
-	 */
-	/* while (et131x_find_adapter(adapter, pdev) != 0); */
-	et131x_find_adapter(adapter, pdev);
+	adapter = et131x_adapter_init(netdev, pdev);
+	/* Initialise the PCI setup for the device */
+	et131x_pci_init(adapter, pdev);
 
 	/* Map the bus-relative registers to system virtual memory */
-
-	adapter->regs = ioremap_nocache(pci_resource_start(pdev, 0),
-					      pci_resource_len(pdev, 0));
+	adapter->regs = pci_ioremap_bar(pdev, 0);
 	if (adapter->regs == NULL) {
 		dev_err(&pdev->dev, "Cannot map device registers\n");
 		result = -ENOMEM;
 		goto err_free_dev;
 	}
 
-	/* Perform device-specific initialization here (See code below) */
-
 	/* If Phy COMA mode was enabled when we went down, disable it here. */
 	writel(ET_PMCSR_INIT,  &adapter->regs->global.pm_csr);
 
@@ -827,20 +751,12 @@ int __devinit et131x_pci_setup(struct pci_dev *pdev,
 	/* Init send data structures */
 	et131x_init_send(adapter);
 
-	/* Register the interrupt
-	 *
-	 * NOTE - This is being done in the open routine, where most other
-	 *         Linux drivers setup IRQ handlers. Make sure device
-	 *         interrupts are not turned on before the IRQ is registered!!
-	 *
-	 *         What we will do here is setup the task structure for the
-	 *         ISR's deferred handler
+	/*
+	 * Set up the task structure for the ISR's deferred handler
 	 */
 	INIT_WORK(&adapter->task, et131x_isr_handler);
 
-	/* Determine MAC Address, and copy into the net_device struct */
-	et131x_setup_hardware_properties(adapter);
-
+	/* Copy address into the net_device struct */
 	memcpy(netdev->dev_addr, adapter->CurrentAddress, ETH_ALEN);
 
 	/* Setup et1310 as per the documentation */
@@ -879,10 +795,7 @@ int __devinit et131x_pci_setup(struct pci_dev *pdev,
 	 * been initialized, just in case it needs to be quickly restored.
 	 */
 	pci_set_drvdata(pdev, netdev);
-
 	pci_save_state(adapter->pdev);
-
-out:
 	return result;
 
 err_mem_free:
@@ -896,7 +809,37 @@ err_release_res:
 	pci_release_regions(pdev);
 err_disable:
 	pci_disable_device(pdev);
-	goto out;
+	return result;
+}
+
+/**
+ * et131x_pci_remove
+ * @pdev: a pointer to the device's pci_dev structure
+ *
+ * Registered in the pci_driver structure, this function is called when the
+ * PCI subsystem detects that a PCI device which matches the information
+ * contained in the pci_device_id table has been removed.
+ */
+
+static void __devexit et131x_pci_remove(struct pci_dev *pdev)
+{
+	struct net_device *netdev;
+	struct et131x_adapter *adapter;
+
+	/* Retrieve the net_device pointer from the pci_dev struct, as well
+	 * as the private adapter struct
+	 */
+	netdev = (struct net_device *) pci_get_drvdata(pdev);
+	adapter = netdev_priv(netdev);
+
+	/* Perform device cleanup */
+	unregister_netdev(netdev);
+	et131x_adapter_memory_free(adapter);
+	iounmap(adapter->regs);
+	pci_dev_put(adapter->pdev);
+	free_netdev(netdev);
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
 }
 
 static struct pci_device_id et131x_pci_table[] __devinitdata = {
@@ -945,7 +888,6 @@ static void __exit et131x_cleanup_module(void)
 module_init(et131x_init_module);
 module_exit(et131x_cleanup_module);
 
-
 /* Modinfo parameters (filled out using defines from et131x_version.h) */
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_INFO);
diff --git a/drivers/staging/et131x/et131x_initpci.h b/drivers/staging/et131x/et131x_initpci.h
index 8131d6a65c2a..7269569a874b 100644
--- a/drivers/staging/et131x/et131x_initpci.h
+++ b/drivers/staging/et131x/et131x_initpci.h
@@ -67,7 +67,7 @@ void et131x_align_allocated_memory(struct et131x_adapter *adapter,
 int et131x_adapter_setup(struct et131x_adapter *adapter);
 int et131x_adapter_memory_alloc(struct et131x_adapter *adapter);
 void et131x_adapter_memory_free(struct et131x_adapter *adapter);
-void et131x_setup_hardware_properties(struct et131x_adapter *adapter);
+void et131x_hwaddr_init(struct et131x_adapter *adapter);
 void et131x_soft_reset(struct et131x_adapter *adapter);
 
 #endif /* __ET131X_INITPCI_H__ */
diff --git a/drivers/staging/et131x/et131x_netdev.c b/drivers/staging/et131x/et131x_netdev.c
index 8c7612f63f91..8d84286fb6b1 100644
--- a/drivers/staging/et131x/et131x_netdev.c
+++ b/drivers/staging/et131x/et131x_netdev.c
@@ -622,7 +622,7 @@ int et131x_change_mtu(struct net_device *netdev, int new_mtu)
 
 	et131x_init_send(adapter);
 
-	et131x_setup_hardware_properties(adapter);
+	et131x_hwaddr_init(adapter);
 	memcpy(netdev->dev_addr, adapter->CurrentAddress, ETH_ALEN);
 
 	/* Init the device with the new settings */
@@ -709,9 +709,7 @@ int et131x_set_mac_addr(struct net_device *netdev, void *new_mac)
 
 	et131x_init_send(adapter);
 
-	et131x_setup_hardware_properties(adapter);
-	/* memcpy( netdev->dev_addr, adapter->CurrentAddress, ETH_ALEN ); */
-	/* blux: no, do not override our nice address */
+	et131x_hwaddr_init(adapter);
 
 	/* Init the device with the new settings */
 	et131x_adapter_setup(adapter);