diff options
| author | Sanchayan Maity <maitysanchayan@gmail.com> | 2015-04-29 19:07:36 +0530 |
|---|---|---|
| committer | Stefan Agner <stefan.agner@toradex.com> | 2015-05-04 16:11:53 +0200 |
| commit | ff73aabd871910b44bea051e41c5024584b1061b (patch) | |
| tree | 36645cdb7f3ec86c8793d74c6e4a3847e3d07bdb /drivers | |
| parent | feb85c154f0a457e17c8b74e9eb2938207a76090 (diff) | |
drivers: w1: tegra_w1: Improve IRQ detection
On Tegra30, on a high CPU load or operating at maximum frequency results
in continous interrupt generation, with the following log spewout:
(tegra_w1_irq: line 236) spurious interrupt, status = 0x800
(tegra_w1_irq: line 236) spurious interrupt, status = 0x800
(tegra_w1_irq: line 236) spurious interrupt, status = 0x800
(tegra_w1_irq: line 236) spurious interrupt, status = 0x800
which shows the TX_FIFO_DATA_REQ to be somehow continously being set. To
circumvent this specifically detect the bit transfer and presence done
IRQ's only, for generating a "completion" signal on which the core logic
waits. We anyhow only wait for these interrupts in particular. While at
it, also change the error message to be printed only if it is
conditionally enabled instead of all the time, which floods the serial
console and allows a wrong interpretation of the one wire device not
working at all.
Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/w1/masters/tegra_w1.c | 5 |
1 files changed, 3 insertions, 2 deletions
diff --git a/drivers/w1/masters/tegra_w1.c b/drivers/w1/masters/tegra_w1.c index 85eefd4d7eb5..e5781abbea53 100644 --- a/drivers/w1/masters/tegra_w1.c +++ b/drivers/w1/masters/tegra_w1.c @@ -227,12 +227,13 @@ static irqreturn_t tegra_w1_irq(int irq, void *cookie) spin_lock_irqsave(&dev->spinlock, irq_flags); - if (likely(dev->transfer_completion)) { + if (likely(dev->transfer_completion) && + ((status & OI_BIT_XFER_DONE) || (status & OI_PRESENCE_DONE))) { dev->intr_status = status; w1_writel(dev, status, OWR_INTR_STATUS); complete(dev->transfer_completion); } else { - W1_ERR("spurious interrupt, status = 0x%lx\n", status); + pr_debug("spurious interrupt, status = 0x%lx\n", status); } spin_unlock_irqrestore(&dev->spinlock, irq_flags); |