summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-03-31 15:11:39 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2012-03-31 15:11:39 -0700
commitb7ffff4bb3fef527a26144a95d9dfe8c11a6b927 (patch)
treed5788ce86b8f0b2290660e1d7298a564a37f62a9 /drivers
parent8bb1f229527dee95644e0f8496980bb767c6f620 (diff)
parentf878d0be229ab129bc4b224191f217106a4b0bc1 (diff)
Merge branch 's3-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/amit/virtio-console
Pull virtio S3 support patches from Amit Shah: "Turns out S3 is not different from S4 for virtio devices: the device is assumed to be reset, so the host and guest state are to be assumed to be out of sync upon resume. We handle the S4 case with exactly the same scenario, so just point the suspend/resume routines to the freeze/restore ones. Once that is done, we also use the PM API's macro to initialise the sleep functions. A couple of cleanups are included: there's no need for special thaw processing in the balloon driver, so that's addressed in patches 1 and 2. Testing: both S3 and S4 support have been tested using these patches using a similar method used earlier during S4 patch development: a guest is started with virtio-blk as the only disk, a virtio network card, a virtio-serial port and a virtio balloon device. Ping from guest to host, dd /dev/zero to a file on the disk, and IO from the host on the virtio-serial port, all at once, while exercising S4 and S3 (separately) were tested. They all continue to work fine after resume. virtio balloon values too were tested by inflating and deflating the balloon." Pulling from Amit, since Rusty is off getting married (and presumably shaving people). * 's3-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/amit/virtio-console: virtio-pci: switch to PM ops macro to initialise PM functions virtio-pci: S3 support virtio-pci: drop restore_common() virtio: drop thaw PM operation virtio: balloon: Allow stats update after restore from S4
Diffstat (limited to 'drivers')
-rw-r--r--drivers/virtio/virtio_balloon.c14
-rw-r--r--drivers/virtio/virtio_pci.c74
2 files changed, 8 insertions, 80 deletions
diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c
index 958e5129c601..05f0a80818a2 100644
--- a/drivers/virtio/virtio_balloon.c
+++ b/drivers/virtio/virtio_balloon.c
@@ -398,21 +398,8 @@ static int restore_common(struct virtio_device *vdev)
return 0;
}
-static int virtballoon_thaw(struct virtio_device *vdev)
-{
- return restore_common(vdev);
-}
-
static int virtballoon_restore(struct virtio_device *vdev)
{
- struct virtio_balloon *vb = vdev->priv;
-
- /*
- * If a request wasn't complete at the time of freezing, this
- * could have been set.
- */
- vb->need_stats_update = 0;
-
return restore_common(vdev);
}
#endif
@@ -434,7 +421,6 @@ static struct virtio_driver virtio_balloon_driver = {
#ifdef CONFIG_PM
.freeze = virtballoon_freeze,
.restore = virtballoon_restore,
- .thaw = virtballoon_thaw,
#endif
};
diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
index 635e1efb3792..2e03d416b9af 100644
--- a/drivers/virtio/virtio_pci.c
+++ b/drivers/virtio/virtio_pci.c
@@ -720,24 +720,6 @@ static void __devexit virtio_pci_remove(struct pci_dev *pci_dev)
}
#ifdef CONFIG_PM
-static int virtio_pci_suspend(struct device *dev)
-{
- struct pci_dev *pci_dev = to_pci_dev(dev);
-
- pci_save_state(pci_dev);
- pci_set_power_state(pci_dev, PCI_D3hot);
- return 0;
-}
-
-static int virtio_pci_resume(struct device *dev)
-{
- struct pci_dev *pci_dev = to_pci_dev(dev);
-
- pci_restore_state(pci_dev);
- pci_set_power_state(pci_dev, PCI_D0);
- return 0;
-}
-
static int virtio_pci_freeze(struct device *dev)
{
struct pci_dev *pci_dev = to_pci_dev(dev);
@@ -758,59 +740,24 @@ static int virtio_pci_freeze(struct device *dev)
return ret;
}
-static int restore_common(struct device *dev)
-{
- struct pci_dev *pci_dev = to_pci_dev(dev);
- struct virtio_pci_device *vp_dev = pci_get_drvdata(pci_dev);
- int ret;
-
- ret = pci_enable_device(pci_dev);
- if (ret)
- return ret;
- pci_set_master(pci_dev);
- vp_finalize_features(&vp_dev->vdev);
-
- return ret;
-}
-
-static int virtio_pci_thaw(struct device *dev)
+static int virtio_pci_restore(struct device *dev)
{
struct pci_dev *pci_dev = to_pci_dev(dev);
struct virtio_pci_device *vp_dev = pci_get_drvdata(pci_dev);
struct virtio_driver *drv;
int ret;
- ret = restore_common(dev);
- if (ret)
- return ret;
-
drv = container_of(vp_dev->vdev.dev.driver,
struct virtio_driver, driver);
- if (drv && drv->thaw)
- ret = drv->thaw(&vp_dev->vdev);
- else if (drv && drv->restore)
- ret = drv->restore(&vp_dev->vdev);
-
- /* Finally, tell the device we're all set */
- if (!ret)
- vp_set_status(&vp_dev->vdev, vp_dev->saved_status);
-
- return ret;
-}
-
-static int virtio_pci_restore(struct device *dev)
-{
- struct pci_dev *pci_dev = to_pci_dev(dev);
- struct virtio_pci_device *vp_dev = pci_get_drvdata(pci_dev);
- struct virtio_driver *drv;
- int ret;
+ ret = pci_enable_device(pci_dev);
+ if (ret)
+ return ret;
- drv = container_of(vp_dev->vdev.dev.driver,
- struct virtio_driver, driver);
+ pci_set_master(pci_dev);
+ vp_finalize_features(&vp_dev->vdev);
- ret = restore_common(dev);
- if (!ret && drv && drv->restore)
+ if (drv && drv->restore)
ret = drv->restore(&vp_dev->vdev);
/* Finally, tell the device we're all set */
@@ -821,12 +768,7 @@ static int virtio_pci_restore(struct device *dev)
}
static const struct dev_pm_ops virtio_pci_pm_ops = {
- .suspend = virtio_pci_suspend,
- .resume = virtio_pci_resume,
- .freeze = virtio_pci_freeze,
- .thaw = virtio_pci_thaw,
- .restore = virtio_pci_restore,
- .poweroff = virtio_pci_suspend,
+ SET_SYSTEM_SLEEP_PM_OPS(virtio_pci_freeze, virtio_pci_restore)
};
#endif