diff options
author | Ivan T. Ivanov <iivanov@mm-sol.com> | 2014-04-28 16:34:18 +0300 |
---|---|---|
committer | Felipe Balbi <balbi@ti.com> | 2014-04-30 11:28:45 -0500 |
commit | d69c6f5df376ea40df5886468b155f515fddfbb2 (patch) | |
tree | fa1cbe3473abe6991397971430dfe56e3a33bf44 /drivers | |
parent | cfa3ff5dfe6a11ac8bc4a080416984ab00b0980c (diff) |
usb: phy: msm: Correct USB PHY Reset sequence for newer platform
On few legacy platforms, USB PHY is having dedicated reset clk.
It is used to reset USB PHY after putting USB PHY into low power
mode and for calibration of USB PHY. Putting USB PHY into low
power mode is causing ulpi read/write timeout as expected. USB PHY
reset clk is not available on newer platform.
For 28nm PHY, reset USB PHY after resetting USB LINK.
Also reset USB PHY using USB_PHY_PON bit with USB_OTG_HS_PHY_CTRL
register after programming USB PHY Override registers as suggested
with hardware programming guidelines.
Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
Signed-off-by: Tim Bird <tim.bird@sonymobile.com>
Cc: Mayank Rana <mrana@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/usb/phy/phy-msm-usb.c | 140 |
1 files changed, 88 insertions, 52 deletions
diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c index 8d57045ac938..bb339963f8bb 100644 --- a/drivers/usb/phy/phy-msm-usb.c +++ b/drivers/usb/phy/phy-msm-usb.c @@ -48,6 +48,7 @@ #define DRIVER_NAME "msm_otg" #define ULPI_IO_TIMEOUT_USEC (10 * 1000) +#define LINK_RESET_TIMEOUT_USEC (250 * 1000) #define USB_PHY_3P3_VOL_MIN 3050000 /* uV */ #define USB_PHY_3P3_VOL_MAX 3300000 /* uV */ @@ -267,77 +268,35 @@ static int msm_otg_phy_clk_reset(struct msm_otg *motg) return ret; } -static int msm_otg_phy_reset(struct msm_otg *motg) +static int msm_link_reset(struct msm_otg *motg) { u32 val; int ret; - int retries; ret = msm_otg_link_clk_reset(motg, 1); if (ret) return ret; - ret = msm_otg_phy_clk_reset(motg); - if (ret) - return ret; - ret = msm_otg_link_clk_reset(motg, 0); - if (ret) - return ret; - val = readl(USB_PORTSC) & ~PORTSC_PTS_MASK; - writel(val | PORTSC_PTS_ULPI, USB_PORTSC); - - for (retries = 3; retries > 0; retries--) { - ret = ulpi_write(&motg->phy, ULPI_FUNC_CTRL_SUSPENDM, - ULPI_CLR(ULPI_FUNC_CTRL)); - if (!ret) - break; - ret = msm_otg_phy_clk_reset(motg); - if (ret) - return ret; - } - if (!retries) - return -ETIMEDOUT; + /* wait for 1ms delay as suggested in HPG. */ + usleep_range(1000, 1200); - /* This reset calibrates the phy, if the above write succeeded */ - ret = msm_otg_phy_clk_reset(motg); + ret = msm_otg_link_clk_reset(motg, 0); if (ret) return ret; - for (retries = 3; retries > 0; retries--) { - ret = ulpi_read(&motg->phy, ULPI_DEBUG); - if (ret != -ETIMEDOUT) - break; - ret = msm_otg_phy_clk_reset(motg); - if (ret) - return ret; - } - if (!retries) - return -ETIMEDOUT; - if (motg->phy_number) writel(readl(USB_PHY_CTRL2) | BIT(16), USB_PHY_CTRL2); - dev_info(motg->phy.dev, "phy_reset: success\n"); + val = readl(USB_PORTSC) & ~PORTSC_PTS_MASK; + writel(val | PORTSC_PTS_ULPI, USB_PORTSC); + return 0; } -#define LINK_RESET_TIMEOUT_USEC (250 * 1000) static int msm_otg_reset(struct usb_phy *phy) { struct msm_otg *motg = container_of(phy, struct msm_otg, phy); - struct msm_otg_platform_data *pdata = motg->pdata; int cnt = 0; - int ret; - u32 val = 0; - u32 ulpi_val = 0; - - ret = msm_otg_phy_reset(motg); - if (ret) { - dev_err(phy->dev, "phy_reset failed\n"); - return ret; - } - - ulpi_init(motg); writel(USBCMD_RESET, USB_USBCMD); while (cnt < LINK_RESET_TIMEOUT_USEC) { @@ -351,11 +310,86 @@ static int msm_otg_reset(struct usb_phy *phy) /* select ULPI phy */ writel(0x80000000, USB_PORTSC); + writel(0x0, USB_AHBBURST); + writel(0x08, USB_AHBMODE); + + if (motg->phy_number) + writel(readl(USB_PHY_CTRL2) | BIT(16), USB_PHY_CTRL2); + return 0; +} + +static void msm_phy_reset(struct msm_otg *motg) +{ + void __iomem *addr; + + if (motg->pdata->phy_type != SNPS_28NM_INTEGRATED_PHY) { + msm_otg_phy_clk_reset(motg); + return; + } + + addr = USB_PHY_CTRL; + if (motg->phy_number) + addr = USB_PHY_CTRL2; + + /* Assert USB PHY_POR */ + writel(readl(addr) | PHY_POR_ASSERT, addr); + + /* + * wait for minimum 10 microseconds as suggested in HPG. + * Use a slightly larger value since the exact value didn't + * work 100% of the time. + */ + udelay(12); + + /* Deassert USB PHY_POR */ + writel(readl(addr) & ~PHY_POR_ASSERT, addr); +} + +static int msm_usb_reset(struct usb_phy *phy) +{ + struct msm_otg *motg = container_of(phy, struct msm_otg, phy); + int ret; + + if (!IS_ERR(motg->core_clk)) + clk_prepare_enable(motg->core_clk); + + ret = msm_link_reset(motg); + if (ret) { + dev_err(phy->dev, "phy_reset failed\n"); + return ret; + } + + ret = msm_otg_reset(&motg->phy); + if (ret) { + dev_err(phy->dev, "link reset failed\n"); + return ret; + } msleep(100); - writel(0x0, USB_AHBBURST); - writel(0x00, USB_AHBMODE); + /* Reset USB PHY after performing USB Link RESET */ + msm_phy_reset(motg); + + if (!IS_ERR(motg->core_clk)) + clk_disable_unprepare(motg->core_clk); + + return 0; +} + +static int msm_phy_init(struct usb_phy *phy) +{ + struct msm_otg *motg = container_of(phy, struct msm_otg, phy); + struct msm_otg_platform_data *pdata = motg->pdata; + u32 val, ulpi_val = 0; + + /* Program USB PHY Override registers. */ + ulpi_init(motg); + + /* + * It is recommended in HPG to reset USB PHY after programming + * USB PHY Override registers. + */ + msm_phy_reset(motg); if (pdata->otg_control == OTG_PHY_CONTROL) { val = readl(USB_OTGSC); @@ -1574,7 +1608,7 @@ static int msm_otg_probe(struct platform_device *pdev) goto disable_ldo; } - phy->init = msm_otg_reset; + phy->init = msm_phy_init; phy->set_power = msm_otg_set_power; phy->io_ops = &msm_otg_io_ops; @@ -1583,6 +1617,8 @@ static int msm_otg_probe(struct platform_device *pdev) phy->otg->set_host = msm_otg_set_host; phy->otg->set_peripheral = msm_otg_set_peripheral; + msm_usb_reset(phy); + ret = usb_add_phy(&motg->phy, USB_PHY_TYPE_USB2); if (ret) { dev_err(&pdev->dev, "usb_add_phy failed\n"); |