diff options
author | Ben Cahill <ben.m.cahill@intel.com> | 2007-11-29 11:10:08 +0800 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2008-01-28 15:05:32 -0800 |
commit | 075416cd18cb4a7ed057d9a96b388bc23b43c4b1 (patch) | |
tree | d790e709ef6295befdf47b7004cebd02dd784742 /drivers | |
parent | e3851447664113bccf9b23af0308e266872a735c (diff) |
iwlwifi: document command header and "alive" responses
Document command header and "alive" responses
Signed-off-by: Ben Cahill <ben.m.cahill@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-3945-commands.h | 85 | ||||
-rw-r--r-- | drivers/net/wireless/iwlwifi/iwl-4965-commands.h | 160 |
2 files changed, 192 insertions, 53 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-commands.h b/drivers/net/wireless/iwlwifi/iwl-3945-commands.h index 794db78c932e..3d3c7e3d37ea 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945-commands.h +++ b/drivers/net/wireless/iwlwifi/iwl-3945-commands.h @@ -121,7 +121,7 @@ enum { REPLY_TX_PWR_TABLE_CMD = 0x97, MEASURE_ABORT_NOTIFICATION = 0x99, /* not used */ - /* BT config command */ + /* Bluetooth device coexistance config command */ REPLY_BT_CONFIG = 0x9b, /* 4965 Statistics */ @@ -144,25 +144,42 @@ enum { * *****************************************************************************/ +/* iwl3945_cmd_header flags value */ #define IWL_CMD_FAILED_MSK 0x40 +/** + * struct iwl3945_cmd_header + * + * This header format appears in the beginning of each command sent from the + * driver, and each response/notification received from uCode. + */ struct iwl3945_cmd_header { - u8 cmd; - u8 flags; - /* We have 15 LSB to use as we please (MSB indicates - * a frame Rx'd from the HW). We encode the following - * information into the sequence field: + u8 cmd; /* Command ID: REPLY_RXON, etc. */ + u8 flags; /* IWL_CMD_* */ + /* + * The driver sets up the sequence number to values of its chosing. + * uCode does not use this value, but passes it back to the driver + * when sending the response to each driver-originated command, so + * the driver can match the response to the command. Since the values + * don't get used by uCode, the driver may set up an arbitrary format. + * + * There is one exception: uCode sets bit 15 when it originates + * the response/notification, i.e. when the response/notification + * is not a direct response to a command sent by the driver. For + * example, uCode issues REPLY_3945_RX when it sends a received frame + * to the driver; it is not a direct response to any driver command. * - * 0:7 index in fifo - * 8:13 fifo selection - * 14:14 bit indicating if this packet references the 'extra' - * storage at the end of the memory queue - * 15:15 (Rx indication) + * The Linux driver uses the following format: * + * 0:7 index/position within Tx queue + * 8:13 Tx queue selection + * 14:14 driver sets this to indicate command is in the 'huge' + * storage at the end of the command buffers, i.e. scan cmd + * 15:15 uCode sets this in uCode-originated response/notification */ __le16 sequence; - /* command data follows immediately */ + /* command or response/notification data follows immediately */ u8 data[0]; } __attribute__ ((packed)); @@ -176,15 +193,22 @@ struct iwl3945_cmd_header { #define INITIALIZE_SUBTYPE (9) /* - * REPLY_ALIVE = 0x1 (response only, not a command) + * ("Initialize") REPLY_ALIVE = 0x1 (response only, not a command) + * + * uCode issues this "initialize alive" notification once the initialization + * uCode image has completed its work, and is ready to load the runtime image. + * This is the *first* "alive" notification that the driver will receive after + * rebooting uCode; the "initialize" alive is indicated by subtype field == 9. + * + * See comments documenting "BSM" (bootstrap state machine). */ -struct iwl3945_alive_resp { +struct iwl3945_init_alive_resp { u8 ucode_minor; u8 ucode_major; __le16 reserved1; u8 sw_rev[8]; u8 ver_type; - u8 ver_subtype; + u8 ver_subtype; /* "9" for initialize alive */ __le16 reserved2; __le32 log_event_table_ptr; __le32 error_event_table_ptr; @@ -192,16 +216,39 @@ struct iwl3945_alive_resp { __le32 is_valid; } __attribute__ ((packed)); -struct iwl3945_init_alive_resp { + +/** + * REPLY_ALIVE = 0x1 (response only, not a command) + * + * uCode issues this "alive" notification once the runtime image is ready + * to receive commands from the driver. This is the *second* "alive" + * notification that the driver will receive after rebooting uCode; + * this "alive" is indicated by subtype field != 9. + * + * See comments documenting "BSM" (bootstrap state machine). + * + * This response includes two pointers to structures within the device's + * data SRAM (access via HBUS_TARG_MEM_* regs) that are useful for debugging: + * + * 1) log_event_table_ptr indicates base of the event log. This traces + * a 256-entry history of uCode execution within a circular buffer. + * + * 2) error_event_table_ptr indicates base of the error log. This contains + * information about any uCode error that occurs. + * + * The Linux driver can print both logs to the system log when a uCode error + * occurs. + */ +struct iwl3945_alive_resp { u8 ucode_minor; u8 ucode_major; __le16 reserved1; u8 sw_rev[8]; u8 ver_type; - u8 ver_subtype; + u8 ver_subtype; /* not "9" for runtime alive */ __le16 reserved2; - __le32 log_event_table_ptr; - __le32 error_event_table_ptr; + __le32 log_event_table_ptr; /* SRAM address for event log */ + __le32 error_event_table_ptr; /* SRAM address for error log */ __le32 timestamp; __le32 is_valid; } __attribute__ ((packed)); diff --git a/drivers/net/wireless/iwlwifi/iwl-4965-commands.h b/drivers/net/wireless/iwlwifi/iwl-4965-commands.h index 9910939f5a32..bde3aa018bba 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965-commands.h +++ b/drivers/net/wireless/iwlwifi/iwl-4965-commands.h @@ -120,7 +120,7 @@ enum { REPLY_TX_PWR_TABLE_CMD = 0x97, MEASURE_ABORT_NOTIFICATION = 0x99, /* not used */ - /* BT config command */ + /* Bluetooth device coexistance config command */ REPLY_BT_CONFIG = 0x9b, /* 4965 Statistics */ @@ -151,25 +151,42 @@ enum { * *****************************************************************************/ +/* iwl4965_cmd_header flags value */ #define IWL_CMD_FAILED_MSK 0x40 +/** + * struct iwl4965_cmd_header + * + * This header format appears in the beginning of each command sent from the + * driver, and each response/notification received from uCode. + */ struct iwl4965_cmd_header { - u8 cmd; - u8 flags; - /* We have 15 LSB to use as we please (MSB indicates - * a frame Rx'd from the HW). We encode the following - * information into the sequence field: + u8 cmd; /* Command ID: REPLY_RXON, etc. */ + u8 flags; /* IWL_CMD_* */ + /* + * The driver sets up the sequence number to values of its chosing. + * uCode does not use this value, but passes it back to the driver + * when sending the response to each driver-originated command, so + * the driver can match the response to the command. Since the values + * don't get used by uCode, the driver may set up an arbitrary format. * - * 0:7 index in fifo - * 8:13 fifo selection - * 14:14 bit indicating if this packet references the 'extra' - * storage at the end of the memory queue - * 15:15 (Rx indication) + * There is one exception: uCode sets bit 15 when it originates + * the response/notification, i.e. when the response/notification + * is not a direct response to a command sent by the driver. For + * example, uCode issues REPLY_3945_RX when it sends a received frame + * to the driver; it is not a direct response to any driver command. * + * The Linux driver uses the following format: + * + * 0:7 index/position within Tx queue + * 8:13 Tx queue selection + * 14:14 driver sets this to indicate command is in the 'huge' + * storage at the end of the command buffers, i.e. scan cmd + * 15:15 uCode sets this in uCode-originated response/notification */ __le16 sequence; - /* command data follows immediately */ + /* command or response/notification data follows immediately */ u8 data[0]; } __attribute__ ((packed)); @@ -218,28 +235,28 @@ struct iwl4965_cmd_header { #define RATE_MCS_HT_DUP_POS 5 #define RATE_MCS_HT_DUP_MSK 0x20 -/* (1) HT format, (0) legacy format in bits 7:0 */ +/* Bit 8: (1) HT format, (0) legacy format in bits 7:0 */ #define RATE_MCS_FLAGS_POS 8 #define RATE_MCS_HT_POS 8 #define RATE_MCS_HT_MSK 0x100 -/* (1) CCK, (0) OFDM. HT (bit 8) must be "0" for this bit to be valid */ +/* Bit 9: (1) CCK, (0) OFDM. HT (bit 8) must be "0" for this bit to be valid */ #define RATE_MCS_CCK_POS 9 #define RATE_MCS_CCK_MSK 0x200 -/* (1) Use Green Field preamble */ +/* Bit 10: (1) Use Green Field preamble */ #define RATE_MCS_GF_POS 10 #define RATE_MCS_GF_MSK 0x400 -/* (1) Use 40Mhz FAT channel width, (0) use 20 MHz legacy channel width */ +/* Bit 11: (1) Use 40Mhz FAT chnl width, (0) use 20 MHz legacy chnl width */ #define RATE_MCS_FAT_POS 11 #define RATE_MCS_FAT_MSK 0x800 -/* (1) Duplicate data on both 20MHz channels. FAT (bit 11) must be set. */ +/* Bit 12: (1) Duplicate data on both 20MHz chnls. FAT (bit 11) must be set. */ #define RATE_MCS_DUP_POS 12 #define RATE_MCS_DUP_MSK 0x1000 -/* (1) Short guard interval (0.4 usec), (0) normal GI (0.8 usec) */ +/* Bit 13: (1) Short guard interval (0.4 usec), (0) normal GI (0.8 usec) */ #define RATE_MCS_SGI_POS 13 #define RATE_MCS_SGI_MSK 0x2000 @@ -266,45 +283,120 @@ struct iwl4965_cmd_header { #define INITIALIZE_SUBTYPE (9) /* - * REPLY_ALIVE = 0x1 (response only, not a command) + * ("Initialize") REPLY_ALIVE = 0x1 (response only, not a command) + * + * uCode issues this "initialize alive" notification once the initialization + * uCode image has completed its work, and is ready to load the runtime image. + * This is the *first* "alive" notification that the driver will receive after + * rebooting uCode; the "initialize" alive is indicated by subtype field == 9. + * + * See comments documenting "BSM" (bootstrap state machine). + * + * For 4965, this notification contains important calibration data for + * calculating txpower settings: + * + * 1) Power supply voltage indication. The voltage sensor outputs higher + * values for lower voltage, and vice versa. + * + * 2) Temperature measurement parameters, for each of two channel widths + * (20 MHz and 40 MHz) supported by the radios. Temperature sensing + * is done via one of the receiver chains, and channel width influences + * the results. + * + * 3) Tx gain compensation to balance 4965's 2 Tx chains for MIMO operation, + * for each of 5 frequency ranges. */ -struct iwl4965_alive_resp { +struct iwl4965_init_alive_resp { u8 ucode_minor; u8 ucode_major; __le16 reserved1; u8 sw_rev[8]; u8 ver_type; - u8 ver_subtype; + u8 ver_subtype; /* "9" for initialize alive */ __le16 reserved2; __le32 log_event_table_ptr; __le32 error_event_table_ptr; __le32 timestamp; __le32 is_valid; + + /* calibration values from "initialize" uCode */ + __le32 voltage; /* signed, higher value is lower voltage */ + __le32 therm_r1[2]; /* signed, 1st for normal, 2nd for FAT channel*/ + __le32 therm_r2[2]; /* signed */ + __le32 therm_r3[2]; /* signed */ + __le32 therm_r4[2]; /* signed */ + __le32 tx_atten[5][2]; /* signed MIMO gain comp, 5 freq groups, + * 2 Tx chains */ } __attribute__ ((packed)); -struct iwl4965_init_alive_resp { + +/** + * REPLY_ALIVE = 0x1 (response only, not a command) + * + * uCode issues this "alive" notification once the runtime image is ready + * to receive commands from the driver. This is the *second* "alive" + * notification that the driver will receive after rebooting uCode; + * this "alive" is indicated by subtype field != 9. + * + * See comments documenting "BSM" (bootstrap state machine). + * + * This response includes two pointers to structures within the device's + * data SRAM (access via HBUS_TARG_MEM_* regs) that are useful for debugging: + * + * 1) log_event_table_ptr indicates base of the event log. This traces + * a 256-entry history of uCode execution within a circular buffer. + * Its header format is: + * + * __le32 log_size; log capacity (in number of entries) + * __le32 type; (1) timestamp with each entry, (0) no timestamp + * __le32 wraps; # times uCode has wrapped to top of circular buffer + * __le32 write_index; next circular buffer entry that uCode would fill + * + * The header is followed by the circular buffer of log entries. Entries + * with timestamps have the following format: + * + * __le32 event_id; range 0 - 1500 + * __le32 timestamp; low 32 bits of TSF (of network, if associated) + * __le32 data; event_id-specific data value + * + * Entries without timestamps contain only event_id and data. + * + * 2) error_event_table_ptr indicates base of the error log. This contains + * information about any uCode error that occurs. For 4965, the format + * of the error log is: + * + * __le32 valid; (nonzero) valid, (0) log is empty + * __le32 error_id; type of error + * __le32 pc; program counter + * __le32 blink1; branch link + * __le32 blink2; branch link + * __le32 ilink1; interrupt link + * __le32 ilink2; interrupt link + * __le32 data1; error-specific data + * __le32 data2; error-specific data + * __le32 line; source code line of error + * __le32 bcon_time; beacon timer + * __le32 tsf_low; network timestamp function timer + * __le32 tsf_hi; network timestamp function timer + * + * The Linux driver can print both logs to the system log when a uCode error + * occurs. + */ +struct iwl4965_alive_resp { u8 ucode_minor; u8 ucode_major; __le16 reserved1; u8 sw_rev[8]; u8 ver_type; - u8 ver_subtype; + u8 ver_subtype; /* not "9" for runtime alive */ __le16 reserved2; - __le32 log_event_table_ptr; - __le32 error_event_table_ptr; + __le32 log_event_table_ptr; /* SRAM address for event log */ + __le32 error_event_table_ptr; /* SRAM address for error log */ __le32 timestamp; __le32 is_valid; - - /* calibration values from "initialize" uCode */ - __le32 voltage; /* signed */ - __le32 therm_r1[2]; /* signed 1st for normal, 2nd for FAT channel */ - __le32 therm_r2[2]; /* signed */ - __le32 therm_r3[2]; /* signed */ - __le32 therm_r4[2]; /* signed */ - __le32 tx_atten[5][2]; /* signed MIMO gain comp, 5 freq groups, - * 2 Tx chains */ } __attribute__ ((packed)); + union tsf { u8 byte[8]; __le16 word[4]; |