summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@woody.linux-foundation.org>2007-10-11 19:20:44 -0700
committerLinus Torvalds <torvalds@woody.linux-foundation.org>2007-10-11 19:20:44 -0700
commit19f71153b9be219756c6b2757921433a69b7975c (patch)
treecc2c5c290a88d61df16848f733aed8708e82c119 /drivers
parente6005a85acb9609326512ecc784859831cfb24a3 (diff)
parent8f4dd2e42637fd61a6366d2cace69091926eaa15 (diff)
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (24 commits) ide: use only ->set_pio_mode method for programming PIO modes (take 2) sis5513: don't change UDMA settings when programming PIO it8213/piix/slc90e66: don't change DMA settings when programming PIO alim15x3: PIO mode setup fixes siimage: fix ->set_pio_mode method to select PIO data transfer cs5520: don't enable VDMA in ->speedproc sc1200: remove redundant warning message from sc1200_tune_chipset() ide-pmac: PIO mode setup fixes (take 3) icside: fix ->speedproc to return on unsupported modes (take 5) sgiioc4: use ide_tune_dma() amd74xx/via82cxxx: use ide_tune_dma() ide: add ide_set{_max}_pio() (take 4) ide: Kconfig face-lift ide: move ide_rate_filter() calls to the upper layer (take 2) sis5513: add ->udma_filter method for chipset_family >= ATA_133 ide: mode limiting fixes for user requested speed changes ide: add missing ide_rate_filter() calls to ->speedproc()-s ide: call udma_filter() before resorting to the UltraDMA mask ide: make jmicron match vendor and device class pdc202xx_new: switch to using pci_get_slot() (take 2) ...
Diffstat (limited to 'drivers')
-rw-r--r--drivers/acpi/bus.c4
-rw-r--r--drivers/ide/Kconfig110
-rw-r--r--drivers/ide/arm/icside.c29
-rw-r--r--drivers/ide/cris/ide-cris.c13
-rw-r--r--drivers/ide/ide-acpi.c42
-rw-r--r--drivers/ide/ide-dma.c48
-rw-r--r--drivers/ide/ide-io.c39
-rw-r--r--drivers/ide/ide-iops.c6
-rw-r--r--drivers/ide/ide-lib.c85
-rw-r--r--drivers/ide/ide-probe.c6
-rw-r--r--drivers/ide/ide.c20
-rw-r--r--drivers/ide/legacy/Makefile2
-rw-r--r--drivers/ide/legacy/ali14xx.c10
-rw-r--r--drivers/ide/legacy/dtc2278.c6
-rw-r--r--drivers/ide/legacy/ht6560b.c11
-rw-r--r--drivers/ide/legacy/ide_platform.c182
-rw-r--r--drivers/ide/legacy/qd65xx.c60
-rw-r--r--drivers/ide/legacy/umc8672.c7
-rw-r--r--drivers/ide/mips/au1xxx-ide.c17
-rw-r--r--drivers/ide/pci/aec62xx.c13
-rw-r--r--drivers/ide/pci/alim15x3.c47
-rw-r--r--drivers/ide/pci/amd74xx.c29
-rw-r--r--drivers/ide/pci/atiixp.c22
-rw-r--r--drivers/ide/pci/cmd640.c35
-rw-r--r--drivers/ide/pci/cmd64x.c49
-rw-r--r--drivers/ide/pci/cs5520.c57
-rw-r--r--drivers/ide/pci/cs5530.c26
-rw-r--r--drivers/ide/pci/cs5535.c19
-rw-r--r--drivers/ide/pci/cy82c693.c20
-rw-r--r--drivers/ide/pci/hpt34x.c10
-rw-r--r--drivers/ide/pci/hpt366.c44
-rw-r--r--drivers/ide/pci/it8213.c28
-rw-r--r--drivers/ide/pci/it821x.c26
-rw-r--r--drivers/ide/pci/jmicron.c81
-rw-r--r--drivers/ide/pci/opti621.c19
-rw-r--r--drivers/ide/pci/pdc202xx_new.c72
-rw-r--r--drivers/ide/pci/pdc202xx_old.c17
-rw-r--r--drivers/ide/pci/piix.c40
-rw-r--r--drivers/ide/pci/sc1200.c32
-rw-r--r--drivers/ide/pci/scc_pata.c19
-rw-r--r--drivers/ide/pci/serverworks.c15
-rw-r--r--drivers/ide/pci/sgiioc4.c88
-rw-r--r--drivers/ide/pci/siimage.c43
-rw-r--r--drivers/ide/pci/sis5513.c51
-rw-r--r--drivers/ide/pci/sl82c105.c27
-rw-r--r--drivers/ide/pci/slc90e66.c22
-rw-r--r--drivers/ide/pci/tc86c001.c11
-rw-r--r--drivers/ide/pci/triflex.c12
-rw-r--r--drivers/ide/pci/via82cxxx.c32
-rw-r--r--drivers/ide/ppc/mpc8xx.c21
-rw-r--r--drivers/ide/ppc/pmac.c40
51 files changed, 917 insertions, 847 deletions
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index 9ba778a2b484..feab124d8e05 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -262,10 +262,12 @@ int acpi_bus_set_power(acpi_handle handle, int state)
printk(KERN_WARNING PREFIX
"Transitioning device [%s] to D%d\n",
device->pnp.bus_id, state);
- else
+ else {
+ device->power.state = state;
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Device [%s] transitioned to D%d\n",
device->pnp.bus_id, state));
+ }
return result;
}
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 4200251ff635..aa0e0c9f74c5 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -308,6 +308,14 @@ config IDE_GENERIC
help
If unsure, say N.
+config BLK_DEV_PLATFORM
+ tristate "Platform driver for IDE interfaces"
+ help
+ This is the platform IDE driver, used mostly for Memory Mapped
+ IDE devices, like Compact Flashes running in True IDE mode.
+
+ If unsure, say N.
+
config BLK_DEV_CMD640
bool "CMD640 chipset bugfix/support"
depends on X86
@@ -351,17 +359,16 @@ config BLK_DEV_IDEPNP
would like the kernel to automatically detect and activate
it, say Y here.
+if PCI
+
+comment "PCI IDE chipsets support"
+
config BLK_DEV_IDEPCI
- bool "PCI IDE chipset support" if PCI
- default BLK_DEV_IDEDMA_PMAC if PPC_PMAC && BLK_DEV_IDEDMA_PMAC
- help
- Say Y here for PCI systems which use IDE drive(s).
- This option helps the IDE driver to automatically detect and
- configure all PCI-based IDE interfaces in your system.
+ bool
config IDEPCI_SHARE_IRQ
bool "Sharing PCI IDE interrupts support"
- depends on PCI && BLK_DEV_IDEPCI
+ depends on BLK_DEV_IDEPCI
help
Some ATA/IDE chipsets have hardware support which allows for
sharing a single IRQ with other cards. To enable support for
@@ -371,11 +378,11 @@ config IDEPCI_SHARE_IRQ
If unsure, say N.
config IDEPCI_PCIBUS_ORDER
- def_bool PCI && BLK_DEV_IDE=y && BLK_DEV_IDEPCI
+ def_bool BLK_DEV_IDE=y && BLK_DEV_IDEPCI
config BLK_DEV_OFFBOARD
bool "Boot off-board chipsets first support"
- depends on PCI && BLK_DEV_IDEPCI
+ depends on BLK_DEV_IDEPCI
help
Normally, IDE controllers built into the motherboard (on-board
controllers) are assigned to ide0 and ide1 while those on add-in PCI
@@ -398,21 +405,23 @@ config BLK_DEV_OFFBOARD
config BLK_DEV_GENERIC
tristate "Generic PCI IDE Chipset Support"
- depends on BLK_DEV_IDEPCI
+ select BLK_DEV_IDEPCI
help
This option provides generic support for various PCI IDE Chipsets
which otherwise might not be supported.
config BLK_DEV_OPTI621
tristate "OPTi 82C621 chipset enhanced support (EXPERIMENTAL)"
- depends on PCI && BLK_DEV_IDEPCI && EXPERIMENTAL
+ depends on EXPERIMENTAL
+ select BLK_DEV_IDEPCI
help
This is a driver for the OPTi 82C621 EIDE controller.
Please read the comments at the top of <file:drivers/ide/pci/opti621.c>.
config BLK_DEV_RZ1000
tristate "RZ1000 chipset bugfix/support"
- depends on PCI && BLK_DEV_IDEPCI && X86
+ depends on X86
+ select BLK_DEV_IDEPCI
help
The PC-Technologies RZ1000 IDE chip is used on many common 486 and
Pentium motherboards, usually along with the "Neptune" chipset.
@@ -423,35 +432,21 @@ config BLK_DEV_RZ1000
things will operate 100% reliably.
config BLK_DEV_IDEDMA_PCI
- bool "Generic PCI bus-master DMA support"
- depends on PCI && BLK_DEV_IDEPCI
- ---help---
- If your PCI system uses IDE drive(s) (as opposed to SCSI, say) and
- is capable of bus-master DMA operation (most Pentium PCI systems),
- you will want to say Y here to reduce CPU overhead. You can then use
- the "hdparm" utility to enable DMA for drives for which it was not
- enabled automatically. By default, DMA is not enabled automatically
- for these drives, but you can change that by saying Y to the
- following question "Use DMA by default when available". You can get
- the latest version of the hdparm utility from
- <ftp://ibiblio.org/pub/Linux/system/hardware/>.
-
- Read the comments at the beginning of <file:drivers/ide/ide-dma.c>
- and the file <file:Documentation/ide.txt> for more information.
-
- It is safe to say Y to this question.
-
-if BLK_DEV_IDEDMA_PCI
+ bool
+ select BLK_DEV_IDEPCI
config BLK_DEV_IDEDMA_FORCED
bool "Force enable legacy 2.0.X HOSTS to use DMA"
+ depends on BLK_DEV_IDEDMA_PCI
help
This is an old piece of lost code from Linux 2.0 Kernels.
Generally say N here.
+# TODO: remove it
config IDEDMA_ONLYDISK
bool "Enable DMA only for disks "
+ depends on BLK_DEV_IDEDMA_PCI
help
This is used if you know your ATAPI Devices are going to fail DMA
Transfers.
@@ -460,6 +455,7 @@ config IDEDMA_ONLYDISK
config BLK_DEV_AEC62XX
tristate "AEC62XX chipset support"
+ select BLK_DEV_IDEDMA_PCI
help
This driver adds explicit support for Acard AEC62xx (Artop ATP8xx)
IDE controllers. This allows the kernel to change PIO, DMA and UDMA
@@ -467,6 +463,7 @@ config BLK_DEV_AEC62XX
config BLK_DEV_ALI15X3
tristate "ALI M15x3 chipset support"
+ select BLK_DEV_IDEDMA_PCI
help
This driver ensures (U)DMA support for ALI 1533, 1543 and 1543C
onboard chipsets. It also tests for Simplex mode and enables
@@ -495,6 +492,7 @@ config WDC_ALI15X3
config BLK_DEV_AMD74XX
tristate "AMD and nVidia IDE support"
+ select BLK_DEV_IDEDMA_PCI
help
This driver adds explicit support for AMD-7xx and AMD-8111 chips
and also for the nVidia nForce chip. This allows the kernel to
@@ -504,6 +502,7 @@ config BLK_DEV_AMD74XX
config BLK_DEV_ATIIXP
tristate "ATI IXP chipset IDE support"
depends on X86
+ select BLK_DEV_IDEDMA_PCI
help
This driver adds explicit support for ATI IXP chipset.
This allows the kernel to change PIO, DMA and UDMA speeds
@@ -513,18 +512,21 @@ config BLK_DEV_ATIIXP
config BLK_DEV_CMD64X
tristate "CMD64{3|6|8|9} chipset support"
+ select BLK_DEV_IDEDMA_PCI
help
Say Y here if you have an IDE controller which uses any of these
chipsets: CMD643, CMD646, or CMD648.
config BLK_DEV_TRIFLEX
tristate "Compaq Triflex IDE support"
+ select BLK_DEV_IDEDMA_PCI
help
Say Y here if you have a Compaq Triflex IDE controller, such
as those commonly found on Compaq Pentium-Pro systems
config BLK_DEV_CY82C693
tristate "CY82C693 chipset support"
+ select BLK_DEV_IDEDMA_PCI
help
This driver adds detection and support for the CY82C693 chipset
used on Digital's PC-Alpha 164SX boards.
@@ -535,6 +537,7 @@ config BLK_DEV_CY82C693
config BLK_DEV_CS5520
tristate "Cyrix CS5510/20 MediaGX chipset support (VERY EXPERIMENTAL)"
depends on EXPERIMENTAL
+ select BLK_DEV_IDEDMA_PCI
help
Include support for PIO tuning and virtual DMA on the Cyrix MediaGX
5510/5520 chipset. This will automatically be detected and
@@ -544,6 +547,7 @@ config BLK_DEV_CS5520
config BLK_DEV_CS5530
tristate "Cyrix/National Semiconductor CS5530 MediaGX chipset support"
+ select BLK_DEV_IDEDMA_PCI
help
Include support for UDMA on the Cyrix MediaGX 5530 chipset. This
will automatically be detected and configured if found.
@@ -553,6 +557,7 @@ config BLK_DEV_CS5530
config BLK_DEV_CS5535
tristate "AMD CS5535 chipset support"
depends on X86 && !X86_64
+ select BLK_DEV_IDEDMA_PCI
help
Include support for UDMA on the NSC/AMD CS5535 companion chipset.
This will automatically be detected and configured if found.
@@ -561,6 +566,7 @@ config BLK_DEV_CS5535
config BLK_DEV_HPT34X
tristate "HPT34X chipset support"
+ select BLK_DEV_IDEDMA_PCI
help
This driver adds up to 4 more EIDE devices sharing a single
interrupt. The HPT343 chipset in its current form is a non-bootable
@@ -581,7 +587,8 @@ config HPT34X_AUTODMA
config BLK_DEV_HPT366
tristate "HPT36X/37X chipset support"
- ---help---
+ select BLK_DEV_IDEDMA_PCI
+ help
HPT366 is an Ultra DMA chipset for ATA-66.
HPT368 is an Ultra DMA chipset for ATA-66 RAID Based.
HPT370 is an Ultra DMA chipset for ATA-100.
@@ -605,18 +612,21 @@ config BLK_DEV_HPT366
config BLK_DEV_JMICRON
tristate "JMicron JMB36x support"
+ select BLK_DEV_IDEDMA_PCI
help
Basic support for the JMicron ATA controllers. For full support
use the libata drivers.
config BLK_DEV_SC1200
tristate "National SCx200 chipset support"
+ select BLK_DEV_IDEDMA_PCI
help
This driver adds support for the built in IDE on the National
SCx200 series of embedded x86 "Geode" systems
config BLK_DEV_PIIX
tristate "Intel PIIXn chipsets support"
+ select BLK_DEV_IDEDMA_PCI
help
This driver adds explicit support for Intel PIIX and ICH chips
and also for the Efar Victory66 (slc90e66) chip. This allows
@@ -625,17 +635,20 @@ config BLK_DEV_PIIX
config BLK_DEV_IT8213
tristate "IT8213 IDE support"
+ select BLK_DEV_IDEDMA_PCI
help
This driver adds support for the ITE 8213 IDE controller.
config BLK_DEV_IT821X
tristate "IT821X IDE support"
+ select BLK_DEV_IDEDMA_PCI
help
This driver adds support for the ITE 8211 IDE controller and the
IT 8212 IDE RAID controller in both RAID and pass-through mode.
config BLK_DEV_NS87415
tristate "NS87415 chipset support"
+ select BLK_DEV_IDEDMA_PCI
help
This driver adds detection and support for the NS87415 chip
(used mainly on SPARC64 and PA-RISC machines).
@@ -644,6 +657,7 @@ config BLK_DEV_NS87415
config BLK_DEV_PDC202XX_OLD
tristate "PROMISE PDC202{46|62|65|67} support"
+ select BLK_DEV_IDEDMA_PCI
help
Promise Ultra33 or PDC20246
Promise Ultra66 or PDC20262
@@ -685,9 +699,11 @@ config PDC202XX_BURST
config BLK_DEV_PDC202XX_NEW
tristate "PROMISE PDC202{68|69|70|71|75|76|77} support"
+ select BLK_DEV_IDEDMA_PCI
config BLK_DEV_SVWKS
tristate "ServerWorks OSB4/CSB5/CSB6 chipsets support"
+ select BLK_DEV_IDEDMA_PCI
help
This driver adds PIO/(U)DMA support for the ServerWorks OSB4/CSB5
chipsets.
@@ -696,6 +712,7 @@ config BLK_DEV_SGIIOC4
tristate "Silicon Graphics IOC4 chipset ATA/ATAPI support"
depends on (IA64_SGI_SN2 || IA64_GENERIC) && SGI_IOC4
select IDEPCI_SHARE_IRQ
+ select BLK_DEV_IDEDMA_PCI
help
This driver adds PIO & MultiMode DMA-2 support for the SGI IOC4
chipset, which has one channel and can support two devices.
@@ -703,6 +720,7 @@ config BLK_DEV_SGIIOC4
config BLK_DEV_SIIMAGE
tristate "Silicon Image chipset support"
+ select BLK_DEV_IDEDMA_PCI
help
This driver adds PIO/(U)DMA support for the SI CMD680 and SII
3112 (Serial ATA) chips.
@@ -710,7 +728,8 @@ config BLK_DEV_SIIMAGE
config BLK_DEV_SIS5513
tristate "SiS5513 chipset support"
depends on X86
- ---help---
+ select BLK_DEV_IDEDMA_PCI
+ help
This driver ensures (U)DMA support for SIS5513 chipset family based
mainboards.
@@ -729,6 +748,7 @@ config BLK_DEV_SIS5513
config BLK_DEV_SL82C105
tristate "Winbond SL82c105 support"
depends on (PPC || ARM)
+ select BLK_DEV_IDEDMA_PCI
help
If you have a Winbond SL82c105 IDE controller, say Y here to enable
special configuration for this chip. This is common on various CHRP
@@ -736,6 +756,7 @@ config BLK_DEV_SL82C105
config BLK_DEV_SLC90E66
tristate "SLC90E66 chipset support"
+ select BLK_DEV_IDEDMA_PCI
help
This driver ensures (U)DMA support for Victory66 SouthBridges for
SMsC with Intel NorthBridges. This is an Ultra66 based chipset.
@@ -751,6 +772,7 @@ config BLK_DEV_SLC90E66
config BLK_DEV_TRM290
tristate "Tekram TRM290 chipset support"
+ select BLK_DEV_IDEDMA_PCI
help
This driver adds support for bus master DMA transfers
using the Tekram TRM290 PCI IDE chip. Volunteers are
@@ -759,6 +781,7 @@ config BLK_DEV_TRM290
config BLK_DEV_VIA82CXXX
tristate "VIA82CXXX chipset support"
+ select BLK_DEV_IDEDMA_PCI
help
This driver adds explicit support for VIA BusMastering IDE chips.
This allows the kernel to change PIO, DMA and UDMA speeds and to
@@ -766,12 +789,14 @@ config BLK_DEV_VIA82CXXX
config BLK_DEV_TC86C001
tristate "Toshiba TC86C001 support"
+ select BLK_DEV_IDEDMA_PCI
help
This driver adds support for Toshiba TC86C001 GOKU-S chip.
config BLK_DEV_CELLEB
tristate "Toshiba's Cell Reference Set IDE support"
depends on PPC_CELLEB
+ select BLK_DEV_IDEDMA_PCI
help
This driver provides support for the built-in IDE controller on
Toshiba Cell Reference Board.
@@ -985,24 +1010,9 @@ config IDE_EXT_DIRECT
endchoice
# no isa -> no vlb
-config IDE_CHIPSETS
- bool "Other IDE chipset support"
- depends on ISA
- ---help---
- Say Y here if you want to include enhanced support for various IDE
- interface chipsets used on motherboards and add-on cards. You can
- then pick your particular IDE chip from among the following options.
- This enhanced support may be necessary for Linux to be able to
- access the 3rd/4th drives in some systems. It may also enable
- setting of higher speed I/O rates to improve system performance with
- these chipsets. Most of these also require special kernel boot
- parameters to actually turn on the support at runtime; you can find
- a list of these in the file <file:Documentation/ide.txt>.
-
- People with SCSI-only systems can say N here.
-
-if IDE_CHIPSETS
+if ISA
+comment "Other IDE chipsets support"
comment "Note: most of these also require special kernel boot parameters"
config BLK_DEV_4DRIVES
diff --git a/drivers/ide/arm/icside.c b/drivers/ide/arm/icside.c
index 8a9b98fcb66d..7912a471f10d 100644
--- a/drivers/ide/arm/icside.c
+++ b/drivers/ide/arm/icside.c
@@ -248,15 +248,9 @@ static void icside_build_sglist(ide_drive_t *drive, struct request *rq)
* MW1 80 50 50 150 C
* MW2 70 25 25 120 C
*/
-static int icside_set_speed(ide_drive_t *drive, u8 xfer_mode)
+static int icside_set_speed(ide_drive_t *drive, const u8 xfer_mode)
{
- int on = 0, cycle_time = 0, use_dma_info = 0;
-
- /*
- * Limit the transfer speed to MW_DMA_2.
- */
- if (xfer_mode > XFER_MW_DMA_2)
- xfer_mode = XFER_MW_DMA_2;
+ int cycle_time, use_dma_info = 0;
switch (xfer_mode) {
case XFER_MW_DMA_2:
@@ -278,6 +272,8 @@ static int icside_set_speed(ide_drive_t *drive, u8 xfer_mode)
case XFER_SW_DMA_0:
cycle_time = 480;
break;
+ default:
+ return 1;
}
/*
@@ -289,17 +285,10 @@ static int icside_set_speed(ide_drive_t *drive, u8 xfer_mode)
drive->drive_data = cycle_time;
- if (cycle_time && ide_config_drive_speed(drive, xfer_mode) == 0)
- on = 1;
- else
- drive->drive_data = 480;
-
printk("%s: %s selected (peak %dMB/s)\n", drive->name,
ide_xfer_verbose(xfer_mode), 2000 / drive->drive_data);
- drive->current_speed = xfer_mode;
-
- return on;
+ return ide_config_drive_speed(drive, xfer_mode);
}
static void icside_dma_host_off(ide_drive_t *drive)
@@ -326,8 +315,7 @@ static int icside_dma_check(ide_drive_t *drive)
{
struct hd_driveid *id = drive->id;
ide_hwif_t *hwif = HWIF(drive);
- int xfer_mode = XFER_PIO_2;
- int on;
+ int xfer_mode = 0;
if (!(id->capability & 1) || !hwif->autodma)
goto out;
@@ -356,9 +344,10 @@ static int icside_dma_check(ide_drive_t *drive)
}
out:
- on = icside_set_speed(drive, xfer_mode);
+ if (xfer_mode == 0)
+ return -1;
- return on ? 0 : -1;
+ return icside_set_speed(drive, xfer_mode) ? -1 : 0;
}
static int icside_dma_end(ide_drive_t *drive)
diff --git a/drivers/ide/cris/ide-cris.c b/drivers/ide/cris/ide-cris.c
index 04636f7eaae7..4bb42b30bfc0 100644
--- a/drivers/ide/cris/ide-cris.c
+++ b/drivers/ide/cris/ide-cris.c
@@ -680,12 +680,10 @@ static void cris_dma_off(ide_drive_t *drive)
{
}
-static void tune_cris_ide(ide_drive_t *drive, u8 pio)
+static void cris_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
int setup, strobe, hold;
- pio = ide_get_best_pio_mode(drive, pio, 4);
-
switch(pio)
{
case 0:
@@ -722,15 +720,10 @@ static void tune_cris_ide(ide_drive_t *drive, u8 pio)
(void)ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
-static int speed_cris_ide(ide_drive_t *drive, u8 speed)
+static int speed_cris_ide(ide_drive_t *drive, const u8 speed)
{
int cyc = 0, dvs = 0, strobe = 0, hold = 0;
- if (speed >= XFER_PIO_0 && speed <= XFER_PIO_4) {
- tune_cris_ide(drive, speed - XFER_PIO_0);
- return ide_config_drive_speed(drive, speed);
- }
-
switch(speed)
{
case XFER_UDMA_0:
@@ -797,7 +790,7 @@ init_e100_ide (void)
ide_register_hw(&hw, 1, &hwif);
hwif->mmio = 1;
hwif->chipset = ide_etrax100;
- hwif->tuneproc = &tune_cris_ide;
+ hwif->set_pio_mode = &cris_set_pio_mode;
hwif->speedproc = &speed_cris_ide;
hwif->ata_input_data = &cris_ide_input_data;
hwif->ata_output_data = &cris_ide_output_data;
diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c
index 17aea65d7dd2..6bff81a58bf3 100644
--- a/drivers/ide/ide-acpi.c
+++ b/drivers/ide/ide-acpi.c
@@ -612,6 +612,46 @@ void ide_acpi_push_timing(ide_hwif_t *hwif)
EXPORT_SYMBOL_GPL(ide_acpi_push_timing);
/**
+ * ide_acpi_set_state - set the channel power state
+ * @hwif: target IDE interface
+ * @on: state, on/off
+ *
+ * This function executes the _PS0/_PS3 ACPI method to set the power state.
+ * ACPI spec requires _PS0 when IDE power on and _PS3 when power off
+ */
+void ide_acpi_set_state(ide_hwif_t *hwif, int on)
+{
+ int unit;
+
+ if (ide_noacpi)
+ return;
+
+ DEBPRINT("ENTER:\n");
+
+ if (!hwif->acpidata) {
+ DEBPRINT("no ACPI data for %s\n", hwif->name);
+ return;
+ }
+ /* channel first and then drives for power on and verse versa for power off */
+ if (on)
+ acpi_bus_set_power(hwif->acpidata->obj_handle, ACPI_STATE_D0);
+ for (unit = 0; unit < MAX_DRIVES; ++unit) {
+ ide_drive_t *drive = &hwif->drives[unit];
+
+ if (!drive->acpidata->obj_handle)
+ drive->acpidata->obj_handle = ide_acpi_drive_get_handle(drive);
+
+ if (drive->acpidata->obj_handle && drive->present) {
+ acpi_bus_set_power(drive->acpidata->obj_handle,
+ on? ACPI_STATE_D0: ACPI_STATE_D3);
+ }
+ }
+ if (!on)
+ acpi_bus_set_power(hwif->acpidata->obj_handle, ACPI_STATE_D3);
+}
+EXPORT_SYMBOL_GPL(ide_acpi_set_state);
+
+/**
* ide_acpi_init - initialize the ACPI link for an IDE interface
* @hwif: target IDE interface (channel)
*
@@ -679,6 +719,8 @@ void ide_acpi_init(ide_hwif_t *hwif)
return;
}
+ /* ACPI _PS0 before _STM */
+ ide_acpi_set_state(hwif, 1);
/*
* ACPI requires us to call _STM on startup
*/
diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
index ff644a5e12cd..6000c08f51ba 100644
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -653,7 +653,7 @@ static const u8 xfer_mode_bases[] = {
XFER_SW_DMA_0,
};
-static unsigned int ide_get_mode_mask(ide_drive_t *drive, u8 base)
+static unsigned int ide_get_mode_mask(ide_drive_t *drive, u8 base, u8 req_mode)
{
struct hd_driveid *id = drive->id;
ide_hwif_t *hwif = drive->hwif;
@@ -664,17 +664,28 @@ static unsigned int ide_get_mode_mask(ide_drive_t *drive, u8 base)
if ((id->field_valid & 4) == 0)
break;
- mask = id->dma_ultra & hwif->ultra_mask;
-
if (hwif->udma_filter)
- mask &= hwif->udma_filter(drive);
+ mask = hwif->udma_filter(drive);
+ else
+ mask = hwif->ultra_mask;
+ mask &= id->dma_ultra;
- if ((mask & 0x78) && (eighty_ninty_three(drive) == 0))
- mask &= 0x07;
+ /*
+ * avoid false cable warning from eighty_ninty_three()
+ */
+ if (req_mode > XFER_UDMA_2) {
+ if ((mask & 0x78) && (eighty_ninty_three(drive) == 0))
+ mask &= 0x07;
+ }
break;
case XFER_MW_DMA_0:
- if (id->field_valid & 2)
- mask = id->dma_mword & hwif->mwdma_mask;
+ if ((id->field_valid & 2) == 0)
+ break;
+ if (hwif->mdma_filter)
+ mask = hwif->mdma_filter(drive);
+ else
+ mask = hwif->mwdma_mask;
+ mask &= id->dma_mword;
break;
case XFER_SW_DMA_0:
if (id->field_valid & 2) {
@@ -703,15 +714,18 @@ static unsigned int ide_get_mode_mask(ide_drive_t *drive, u8 base)
}
/**
- * ide_max_dma_mode - compute DMA speed
+ * ide_find_dma_mode - compute DMA speed
* @drive: IDE device
+ * @req_mode: requested mode
+ *
+ * Checks the drive/host capabilities and finds the speed to use for
+ * the DMA transfer. The speed is then limited by the requested mode.
*
- * Checks the drive capabilities and returns the speed to use
- * for the DMA transfer. Returns 0 if the drive is incapable
- * of DMA transfers.
+ * Returns 0 if the drive/host combination is incapable of DMA transfers
+ * or if the requested mode is not a DMA mode.
*/
-u8 ide_max_dma_mode(ide_drive_t *drive)
+u8 ide_find_dma_mode(ide_drive_t *drive, u8 req_mode)
{
ide_hwif_t *hwif = drive->hwif;
unsigned int mask;
@@ -722,7 +736,9 @@ u8 ide_max_dma_mode(ide_drive_t *drive)
return 0;
for (i = 0; i < ARRAY_SIZE(xfer_mode_bases); i++) {
- mask = ide_get_mode_mask(drive, xfer_mode_bases[i]);
+ if (req_mode < xfer_mode_bases[i])
+ continue;
+ mask = ide_get_mode_mask(drive, xfer_mode_bases[i], req_mode);
x = fls(mask) - 1;
if (x >= 0) {
mode = xfer_mode_bases[i] + x;
@@ -732,10 +748,10 @@ u8 ide_max_dma_mode(ide_drive_t *drive)
printk(KERN_DEBUG "%s: selected mode 0x%x\n", drive->name, mode);
- return mode;
+ return min(mode, req_mode);
}
-EXPORT_SYMBOL_GPL(ide_max_dma_mode);
+EXPORT_SYMBOL_GPL(ide_find_dma_mode);
int ide_tune_dma(ide_drive_t *drive)
{
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index aa9f5f0b1e67..9560a8f4a86c 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -201,8 +201,7 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *
return do_rw_taskfile(drive, args);
case idedisk_pm_restore_pio: /* Resume step 1 (restore PIO) */
- if (drive->hwif->tuneproc != NULL)
- drive->hwif->tuneproc(drive, 255);
+ ide_set_max_pio(drive);
/*
* skip idedisk_pm_idle for ATAPI devices
*/
@@ -788,6 +787,30 @@ static ide_startstop_t ide_disk_special(ide_drive_t *drive)
return ide_started;
}
+/*
+ * handle HDIO_SET_PIO_MODE ioctl abusers here, eventually it will go away
+ */
+static int set_pio_mode_abuse(ide_hwif_t *hwif, u8 req_pio)
+{
+ switch (req_pio) {
+ case 202:
+ case 201:
+ case 200:
+ case 102:
+ case 101:
+ case 100:
+ return (hwif->host_flags & IDE_HFLAG_ABUSE_DMA_MODES) ? 1 : 0;
+ case 9:
+ case 8:
+ return (hwif->host_flags & IDE_HFLAG_ABUSE_PREFETCH) ? 1 : 0;
+ case 7:
+ case 6:
+ return (hwif->host_flags & IDE_HFLAG_ABUSE_FAST_DEVSEL) ? 1 : 0;
+ default:
+ return 0;
+ }
+}
+
/**
* do_special - issue some special commands
* @drive: drive the command is for
@@ -805,9 +828,17 @@ static ide_startstop_t do_special (ide_drive_t *drive)
printk("%s: do_special: 0x%02x\n", drive->name, s->all);
#endif
if (s->b.set_tune) {
+ ide_hwif_t *hwif = drive->hwif;
+ u8 req_pio = drive->tune_req;
+
s->b.set_tune = 0;
- if (HWIF(drive)->tuneproc != NULL)
- HWIF(drive)->tuneproc(drive, drive->tune_req);
+
+ if (set_pio_mode_abuse(drive->hwif, req_pio)) {
+ if (hwif->set_pio_mode)
+ hwif->set_pio_mode(drive, req_pio);
+ } else
+ ide_set_pio(drive, req_pio);
+
return ide_stopped;
} else {
if (drive->media == ide_disk)
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index 646a54e233d3..cf0678b61161 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -780,12 +780,6 @@ int ide_driveid_update (ide_drive_t *drive)
/*
* Similar to ide_wait_stat(), except it never calls ide_error internally.
- * This is a kludge to handle the new ide_config_drive_speed() function,
- * and should not otherwise be used anywhere. Eventually, the tuneproc's
- * should be updated to return ide_startstop_t, in which case we can get
- * rid of this abomination again. :) -ml
- *
- * It is gone..........
*
* const char *msg == consider adding for verbose errors.
*/
diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c
index 92a6c7bcf527..d97390c0543b 100644
--- a/drivers/ide/ide-lib.c
+++ b/drivers/ide/ide-lib.c
@@ -76,41 +76,26 @@ EXPORT_SYMBOL(ide_xfer_verbose);
* Given the available transfer modes this function returns
* the best available speed at or below the speed requested.
*
- * FIXME: filter also PIO/SWDMA/MWDMA modes
+ * TODO: check device PIO capabilities
*/
-u8 ide_rate_filter(ide_drive_t *drive, u8 speed)
+static u8 ide_rate_filter(ide_drive_t *drive, u8 speed)
{
-#ifdef CONFIG_BLK_DEV_IDEDMA
ide_hwif_t *hwif = drive->hwif;
- u8 mask = hwif->ultra_mask, mode = XFER_MW_DMA_2;
+ u8 mode = ide_find_dma_mode(drive, speed);
- if (hwif->udma_filter)
- mask = hwif->udma_filter(drive);
-
- /*
- * TODO: speed > XFER_UDMA_2 extra check is needed to avoid false
- * cable warning from eighty_ninty_three(), moving ide_rate_filter()
- * calls from ->speedproc to core code will make this hack go away
- */
- if (speed > XFER_UDMA_2) {
- if ((mask & 0x78) && (eighty_ninty_three(drive) == 0))
- mask &= 0x07;
+ if (mode == 0) {
+ if (hwif->pio_mask)
+ mode = fls(hwif->pio_mask) - 1 + XFER_PIO_0;
+ else
+ mode = XFER_PIO_4;
}
- if (mask)
- mode = fls(mask) - 1 + XFER_UDMA_0;
-
// printk("%s: mode 0x%02x, speed 0x%02x\n", __FUNCTION__, mode, speed);
return min(speed, mode);
-#else /* !CONFIG_BLK_DEV_IDEDMA */
- return min(speed, (u8)XFER_PIO_4);
-#endif /* CONFIG_BLK_DEV_IDEDMA */
}
-EXPORT_SYMBOL(ide_rate_filter);
-
int ide_use_fast_pio(ide_drive_t *drive)
{
struct hd_driveid *id = drive->id;
@@ -340,6 +325,35 @@ u8 ide_get_best_pio_mode (ide_drive_t *drive, u8 mode_wanted, u8 max_mode)
EXPORT_SYMBOL_GPL(ide_get_best_pio_mode);
+/* req_pio == "255" for auto-tune */
+void ide_set_pio(ide_drive_t *drive, u8 req_pio)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ u8 host_pio, pio;
+
+ if (hwif->set_pio_mode == NULL)
+ return;
+
+ BUG_ON(hwif->pio_mask == 0x00);
+
+ host_pio = fls(hwif->pio_mask) - 1;
+
+ pio = ide_get_best_pio_mode(drive, req_pio, host_pio);
+
+ /*
+ * TODO:
+ * - report device max PIO mode
+ * - check req_pio != 255 against device max PIO mode
+ */
+ printk(KERN_DEBUG "%s: host max PIO%d wanted PIO%d%s selected PIO%d\n",
+ drive->name, host_pio, req_pio,
+ req_pio == 255 ? "(auto-tune)" : "", pio);
+
+ hwif->set_pio_mode(drive, pio);
+}
+
+EXPORT_SYMBOL_GPL(ide_set_pio);
+
/**
* ide_toggle_bounce - handle bounce buffering
* @drive: drive to update
@@ -377,13 +391,26 @@ void ide_toggle_bounce(ide_drive_t *drive, int on)
int ide_set_xfer_rate(ide_drive_t *drive, u8 rate)
{
-#ifndef CONFIG_BLK_DEV_IDEDMA
- rate = min(rate, (u8) XFER_PIO_4);
-#endif
- if(HWIF(drive)->speedproc)
- return HWIF(drive)->speedproc(drive, rate);
- else
+ ide_hwif_t *hwif = drive->hwif;
+
+ if (hwif->speedproc == NULL)
return -1;
+
+ rate = ide_rate_filter(drive, rate);
+
+ if (rate >= XFER_PIO_0 && rate <= XFER_PIO_5) {
+ if (hwif->set_pio_mode)
+ hwif->set_pio_mode(drive, rate - XFER_PIO_0);
+
+ /*
+ * FIXME: this is incorrect to return zero here but
+ * since all users of ide_set_xfer_rate() ignore
+ * the return value it is not a problem currently
+ */
+ return 0;
+ }
+
+ return hwif->speedproc(drive, rate);
}
static void ide_dump_opcode(ide_drive_t *drive)
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 3a2a9a338fd9..b4c9f63a3854 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -827,10 +827,8 @@ static void probe_hwif(ide_hwif_t *hwif, void (*fixup)(ide_hwif_t *hwif))
ide_drive_t *drive = &hwif->drives[unit];
if (drive->present) {
- if (hwif->tuneproc != NULL &&
- drive->autotune == IDE_TUNE_AUTO)
- /* auto-tune PIO mode */
- hwif->tuneproc(drive, 255);
+ if (drive->autotune == IDE_TUNE_AUTO)
+ ide_set_max_pio(drive);
if (drive->autotune != IDE_TUNE_DEFAULT &&
drive->autotune != IDE_TUNE_AUTO)
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index 5e88a060df06..e96212ce5729 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -396,8 +396,9 @@ static void ide_hwif_restore(ide_hwif_t *hwif, ide_hwif_t *tmp_hwif)
hwif->cds = tmp_hwif->cds;
#endif
- hwif->tuneproc = tmp_hwif->tuneproc;
+ hwif->set_pio_mode = tmp_hwif->set_pio_mode;
hwif->speedproc = tmp_hwif->speedproc;
+ hwif->mdma_filter = tmp_hwif->mdma_filter;
hwif->udma_filter = tmp_hwif->udma_filter;
hwif->selectproc = tmp_hwif->selectproc;
hwif->reset_poll = tmp_hwif->reset_poll;
@@ -866,8 +867,9 @@ int set_pio_mode(ide_drive_t *drive, int arg)
if (arg < 0 || arg > 255)
return -EINVAL;
- if (!HWIF(drive)->tuneproc)
+ if (drive->hwif->set_pio_mode == NULL)
return -ENOSYS;
+
if (drive->special.b.set_tune)
return -EBUSY;
ide_init_drive_cmd(&rq);
@@ -914,6 +916,7 @@ static int generic_ide_suspend(struct device *dev, pm_message_t mesg)
struct request rq;
struct request_pm_state rqpm;
ide_task_t args;
+ int ret;
/* Call ACPI _GTM only once */
if (!(drive->dn % 2))
@@ -930,7 +933,14 @@ static int generic_ide_suspend(struct device *dev, pm_message_t mesg)
mesg.event = PM_EVENT_FREEZE;
rqpm.pm_state = mesg.event;
- return ide_do_drive_cmd(drive, &rq, ide_wait);
+ ret = ide_do_drive_cmd(drive, &rq, ide_wait);
+ /* only call ACPI _PS3 after both drivers are suspended */
+ if (!ret && (((drive->dn % 2) && hwif->drives[0].present
+ && hwif->drives[1].present)
+ || !hwif->drives[0].present
+ || !hwif->drives[1].present))
+ ide_acpi_set_state(hwif, 0);
+ return ret;
}
static int generic_ide_resume(struct device *dev)
@@ -943,8 +953,10 @@ static int generic_ide_resume(struct device *dev)
int err;
/* Call ACPI _STM only once */
- if (!(drive->dn % 2))
+ if (!(drive->dn % 2)) {
+ ide_acpi_set_state(hwif, 1);
ide_acpi_push_timing(hwif);
+ }
ide_acpi_exec_tfs(drive);
diff --git a/drivers/ide/legacy/Makefile b/drivers/ide/legacy/Makefile
index c7971061767e..409822349f10 100644
--- a/drivers/ide/legacy/Makefile
+++ b/drivers/ide/legacy/Makefile
@@ -7,6 +7,8 @@ obj-$(CONFIG_BLK_DEV_UMC8672) += umc8672.o
obj-$(CONFIG_BLK_DEV_IDECS) += ide-cs.o
+obj-$(CONFIG_BLK_DEV_PLATFORM) += ide_platform.o
+
# Last of all
obj-$(CONFIG_BLK_DEV_HD) += hd.o
diff --git a/drivers/ide/legacy/ali14xx.c b/drivers/ide/legacy/ali14xx.c
index 9b9c4761cb7d..2f0ef9b44033 100644
--- a/drivers/ide/legacy/ali14xx.c
+++ b/drivers/ide/legacy/ali14xx.c
@@ -68,8 +68,6 @@ static RegInitializer initData[] __initdata = {
{0x35, 0x03}, {0x00, 0x00}
};
-#define ALI_MAX_PIO 4
-
/* timing parameter registers for each drive */
static struct { u8 reg1, reg2, reg3, reg4; } regTab[4] = {
{0x03, 0x26, 0x04, 0x27}, /* drive 0 */
@@ -109,7 +107,7 @@ static void outReg (u8 data, u8 reg)
* This function computes timing parameters
* and sets controller registers accordingly.
*/
-static void ali14xx_tune_drive (ide_drive_t *drive, u8 pio)
+static void ali14xx_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
int driveNum;
int time1, time2;
@@ -117,8 +115,6 @@ static void ali14xx_tune_drive (ide_drive_t *drive, u8 pio)
unsigned long flags;
int bus_speed = system_bus_clock();
- pio = ide_get_best_pio_mode(drive, pio, ALI_MAX_PIO);
-
/* calculate timing, according to PIO mode */
time1 = ide_pio_cycle_time(drive, pio);
time2 = ide_pio_timings[pio].active_time;
@@ -212,12 +208,12 @@ static int __init ali14xx_probe(void)
hwif->chipset = ide_ali14xx;
hwif->pio_mask = ATA_PIO4;
- hwif->tuneproc = &ali14xx_tune_drive;
+ hwif->set_pio_mode = &ali14xx_set_pio_mode;
hwif->mate = mate;
mate->chipset = ide_ali14xx;
mate->pio_mask = ATA_PIO4;
- mate->tuneproc = &ali14xx_tune_drive;
+ mate->set_pio_mode = &ali14xx_set_pio_mode;
mate->mate = hwif;
mate->channel = 1;
diff --git a/drivers/ide/legacy/dtc2278.c b/drivers/ide/legacy/dtc2278.c
index 6c01d951d074..f16521254867 100644
--- a/drivers/ide/legacy/dtc2278.c
+++ b/drivers/ide/legacy/dtc2278.c
@@ -67,12 +67,10 @@ static void sub22 (char b, char c)
}
}
-static void tune_dtc2278 (ide_drive_t *drive, u8 pio)
+static void dtc2278_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
unsigned long flags;
- pio = ide_get_best_pio_mode(drive, pio, 4);
-
if (pio >= 3) {
spin_lock_irqsave(&ide_lock, flags);
/*
@@ -124,7 +122,7 @@ static int __init dtc2278_probe(void)
hwif->serialized = 1;
hwif->chipset = ide_dtc2278;
hwif->pio_mask = ATA_PIO4;
- hwif->tuneproc = &tune_dtc2278;
+ hwif->set_pio_mode = &dtc2278_set_pio_mode;
hwif->drives[0].no_unmask = 1;
hwif->drives[1].no_unmask = 1;
hwif->mate = mate;
diff --git a/drivers/ide/legacy/ht6560b.c b/drivers/ide/legacy/ht6560b.c
index bfaa2025173b..2e5a9cc5c0f7 100644
--- a/drivers/ide/legacy/ht6560b.c
+++ b/drivers/ide/legacy/ht6560b.c
@@ -199,7 +199,7 @@ static int __init try_to_init_ht6560b(void)
return 1;
}
-static u8 ht_pio2timings(ide_drive_t *drive, u8 pio)
+static u8 ht_pio2timings(ide_drive_t *drive, const u8 pio)
{
int active_time, recovery_time;
int active_cycles, recovery_cycles;
@@ -208,7 +208,6 @@ static u8 ht_pio2timings(ide_drive_t *drive, u8 pio)
if (pio) {
unsigned int cycle_time;
- pio = ide_get_best_pio_mode(drive, pio, 5);
cycle_time = ide_pio_cycle_time(drive, pio);
/*
@@ -277,7 +276,7 @@ static void ht_set_prefetch(ide_drive_t *drive, u8 state)
#endif
}
-static void tune_ht6560b (ide_drive_t *drive, u8 pio)
+static void ht6560b_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
unsigned long flags;
u8 timing;
@@ -333,15 +332,17 @@ int __init ht6560b_init(void)
hwif->chipset = ide_ht6560b;
hwif->selectproc = &ht6560b_selectproc;
+ hwif->host_flags = IDE_HFLAG_ABUSE_PREFETCH;
hwif->pio_mask = ATA_PIO5;
- hwif->tuneproc = &tune_ht6560b;
+ hwif->set_pio_mode = &ht6560b_set_pio_mode;
hwif->serialized = 1; /* is this needed? */
hwif->mate = mate;
mate->chipset = ide_ht6560b;
mate->selectproc = &ht6560b_selectproc;
+ mate->host_flags = IDE_HFLAG_ABUSE_PREFETCH;
mate->pio_mask = ATA_PIO5;
- mate->tuneproc = &tune_ht6560b;
+ mate->set_pio_mode = &ht6560b_set_pio_mode;
mate->serialized = 1; /* is this needed? */
mate->mate = hwif;
mate->channel = 1;
diff --git a/drivers/ide/legacy/ide_platform.c b/drivers/ide/legacy/ide_platform.c
new file mode 100644
index 000000000000..ccfb9893a467
--- /dev/null
+++ b/drivers/ide/legacy/ide_platform.c
@@ -0,0 +1,182 @@
+/*
+ * Platform IDE driver
+ *
+ * Copyright (C) 2007 MontaVista Software
+ *
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/ide.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/pata_platform.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+static struct {
+ void __iomem *plat_ide_mapbase;
+ void __iomem *plat_ide_alt_mapbase;
+ ide_hwif_t *hwif;
+ int index;
+} hwif_prop;
+
+static ide_hwif_t *__devinit plat_ide_locate_hwif(void __iomem *base,
+ void __iomem *ctrl, struct pata_platform_info *pdata, int irq,
+ int mmio)
+{
+ unsigned long port = (unsigned long)base;
+ ide_hwif_t *hwif;
+ int index, i;
+
+ for (index = 0; index < MAX_HWIFS; ++index) {
+ hwif = ide_hwifs + index;
+ if (hwif->io_ports[IDE_DATA_OFFSET] == port)
+ goto found;
+ }
+
+ for (index = 0; index < MAX_HWIFS; ++index) {
+ hwif = ide_hwifs + index;
+ if (hwif->io_ports[IDE_DATA_OFFSET] == 0)
+ goto found;
+ }
+
+ return NULL;
+
+found:
+
+ hwif->hw.io_ports[IDE_DATA_OFFSET] = port;
+
+ port += (1 << pdata->ioport_shift);
+ for (i = IDE_ERROR_OFFSET; i <= IDE_STATUS_OFFSET;
+ i++, port += (1 << pdata->ioport_shift))
+ hwif->hw.io_ports[i] = port;
+
+ hwif->hw.io_ports[IDE_CONTROL_OFFSET] = (unsigned long)ctrl;
+
+ memcpy(hwif->io_ports, hwif->hw.io_ports, sizeof(hwif->hw.io_ports));
+ hwif->hw.irq = hwif->irq = irq;
+
+ hwif->hw.dma = NO_DMA;
+ hwif->hw.chipset = ide_generic;
+
+ if (mmio) {
+ hwif->mmio = 1;
+ default_hwif_mmiops(hwif);
+ }
+
+ hwif_prop.hwif = hwif;
+ hwif_prop.index = index;
+
+ return hwif;
+}
+
+static int __devinit plat_ide_probe(struct platform_device *pdev)
+{
+ struct resource *res_base, *res_alt, *res_irq;
+ ide_hwif_t *hwif;
+ struct pata_platform_info *pdata;
+ int ret = 0;
+ int mmio = 0;
+
+ pdata = pdev->dev.platform_data;
+
+ /* get a pointer to the register memory */
+ res_base = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ res_alt = platform_get_resource(pdev, IORESOURCE_IO, 1);
+
+ if (!res_base || !res_alt) {
+ res_base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ res_alt = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (!res_base || !res_alt) {
+ ret = -ENOMEM;
+ goto out;
+ }
+ mmio = 1;
+ }
+
+ res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!res_irq) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ if (mmio) {
+ hwif_prop.plat_ide_mapbase = devm_ioremap(&pdev->dev,
+ res_base->start, res_base->end - res_base->start + 1);
+ hwif_prop.plat_ide_alt_mapbase = devm_ioremap(&pdev->dev,
+ res_alt->start, res_alt->end - res_alt->start + 1);
+ } else {
+ hwif_prop.plat_ide_mapbase = devm_ioport_map(&pdev->dev,
+ res_base->start, res_base->end - res_base->start + 1);
+ hwif_prop.plat_ide_alt_mapbase = devm_ioport_map(&pdev->dev,
+ res_alt->start, res_alt->end - res_alt->start + 1);
+ }
+
+ hwif = plat_ide_locate_hwif(hwif_prop.plat_ide_mapbase,
+ hwif_prop.plat_ide_alt_mapbase, pdata, res_irq->start, mmio);
+
+ if (!hwif) {
+ ret = -ENODEV;
+ goto out;
+ }
+ hwif->gendev.parent = &pdev->dev;
+ hwif->noprobe = 0;
+
+ probe_hwif_init(hwif);
+
+ platform_set_drvdata(pdev, hwif);
+ ide_proc_register_port(hwif);
+
+ return 0;
+
+out:
+ return ret;
+}
+
+static int __devexit plat_ide_remove(struct platform_device *pdev)
+{
+ ide_hwif_t *hwif = pdev->dev.driver_data;
+
+ if (hwif != hwif_prop.hwif) {
+ dev_printk(KERN_DEBUG, &pdev->dev, "%s: hwif value error",
+ pdev->name);
+ } else {
+ ide_unregister(hwif_prop.index);
+ hwif_prop.index = 0;
+ hwif_prop.hwif = NULL;
+ }
+
+ return 0;
+}
+
+static struct platform_driver platform_ide_driver = {
+ .driver = {
+ .name = "pata_platform",
+ },
+ .probe = plat_ide_probe,
+ .remove = __devexit_p(plat_ide_remove),
+};
+
+static int __init platform_ide_init(void)
+{
+ return platform_driver_register(&platform_ide_driver);
+}
+
+static void __exit platform_ide_exit(void)
+{
+ platform_driver_unregister(&platform_ide_driver);
+}
+
+MODULE_DESCRIPTION("Platform IDE driver");
+MODULE_LICENSE("GPL");
+
+module_init(platform_ide_init);
+module_exit(platform_ide_exit);
diff --git a/drivers/ide/legacy/qd65xx.c b/drivers/ide/legacy/qd65xx.c
index 8b87a424094a..0c81d2d0b941 100644
--- a/drivers/ide/legacy/qd65xx.c
+++ b/drivers/ide/legacy/qd65xx.c
@@ -224,15 +224,14 @@ static void qd_set_timing (ide_drive_t *drive, u8 timing)
printk(KERN_DEBUG "%s: %#x\n", drive->name, timing);
}
-/*
- * qd6500_tune_drive
- */
-
-static void qd6500_tune_drive (ide_drive_t *drive, u8 pio)
+static void qd6500_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
int active_time = 175;
int recovery_time = 415; /* worst case values from the dos driver */
+ /*
+ * FIXME: use "pio" value
+ */
if (drive->id && !qd_find_disk_type(drive, &active_time, &recovery_time)
&& drive->id->tPIO && (drive->id->field_valid & 0x02)
&& drive->id->eide_pio >= 240) {
@@ -246,11 +245,7 @@ static void qd6500_tune_drive (ide_drive_t *drive, u8 pio)
qd_set_timing(drive, qd6500_compute_timing(HWIF(drive), active_time, recovery_time));
}
-/*
- * qd6580_tune_drive
- */
-
-static void qd6580_tune_drive (ide_drive_t *drive, u8 pio)
+static void qd6580_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
int base = HWIF(drive)->select_data;
unsigned int cycle_time;
@@ -258,7 +253,6 @@ static void qd6580_tune_drive (ide_drive_t *drive, u8 pio)
int recovery_time = 415; /* worst case values from the dos driver */
if (drive->id && !qd_find_disk_type(drive, &active_time, &recovery_time)) {
- pio = ide_get_best_pio_mode(drive, pio, 4);
cycle_time = ide_pio_cycle_time(drive, pio);
switch (pio) {
@@ -335,8 +329,7 @@ static int __init qd_testreg(int port)
*/
static void __init qd_setup(ide_hwif_t *hwif, int base, int config,
- unsigned int data0, unsigned int data1,
- void (*tuneproc) (ide_drive_t *, u8 pio))
+ unsigned int data0, unsigned int data1)
{
hwif->chipset = ide_qd65xx;
hwif->channel = hwif->index;
@@ -347,8 +340,6 @@ static void __init qd_setup(ide_hwif_t *hwif, int base, int config,
hwif->drives[0].io_32bit =
hwif->drives[1].io_32bit = 1;
hwif->pio_mask = ATA_PIO4;
- hwif->tuneproc = tuneproc;
- probe_hwif_init(hwif);
}
/*
@@ -361,7 +352,7 @@ static void __exit qd_unsetup(ide_hwif_t *hwif)
{
u8 config = hwif->config_data;
int base = hwif->select_data;
- void *tuneproc = (void *) hwif->tuneproc;
+ void *set_pio_mode = (void *)hwif->set_pio_mode;
if (hwif->chipset != ide_qd65xx)
return;
@@ -369,12 +360,12 @@ static void __exit qd_unsetup(ide_hwif_t *hwif)
printk(KERN_NOTICE "%s: back to defaults\n", hwif->name);
hwif->selectproc = NULL;
- hwif->tuneproc = NULL;
+ hwif->set_pio_mode = NULL;
- if (tuneproc == (void *) qd6500_tune_drive) {
+ if (set_pio_mode == (void *)qd6500_set_pio_mode) {
// will do it for both
qd_write_reg(QD6500_DEF_DATA, QD_TIMREG(&hwif->drives[0]));
- } else if (tuneproc == (void *) qd6580_tune_drive) {
+ } else if (set_pio_mode == (void *)qd6580_set_pio_mode) {
if (QD_CONTROL(hwif) & QD_CONTR_SEC_DISABLED) {
qd_write_reg(QD6580_DEF_DATA, QD_TIMREG(&hwif->drives[0]));
qd_write_reg(QD6580_DEF_DATA2, QD_TIMREG(&hwif->drives[1]));
@@ -424,8 +415,11 @@ static int __init qd_probe(int base)
return 1;
}
- qd_setup(hwif, base, config, QD6500_DEF_DATA, QD6500_DEF_DATA,
- &qd6500_tune_drive);
+ qd_setup(hwif, base, config, QD6500_DEF_DATA, QD6500_DEF_DATA);
+
+ hwif->set_pio_mode = &qd6500_set_pio_mode;
+
+ probe_hwif_init(hwif);
ide_proc_register_port(hwif);
@@ -455,8 +449,12 @@ static int __init qd_probe(int base)
printk(KERN_INFO "%s: qd6580: single IDE board\n",
hwif->name);
qd_setup(hwif, base, config | (control << 8),
- QD6580_DEF_DATA, QD6580_DEF_DATA2,
- &qd6580_tune_drive);
+ QD6580_DEF_DATA, QD6580_DEF_DATA2);
+
+ hwif->set_pio_mode = &qd6580_set_pio_mode;
+
+ probe_hwif_init(hwif);
+
qd_write_reg(QD_DEF_CONTR,QD_CONTROL_PORT);
ide_proc_register_port(hwif);
@@ -472,11 +470,19 @@ static int __init qd_probe(int base)
hwif->name, mate->name);
qd_setup(hwif, base, config | (control << 8),
- QD6580_DEF_DATA, QD6580_DEF_DATA,
- &qd6580_tune_drive);
+ QD6580_DEF_DATA, QD6580_DEF_DATA);
+
+ hwif->set_pio_mode = &qd6580_set_pio_mode;
+
+ probe_hwif_init(hwif);
+
qd_setup(mate, base, config | (control << 8),
- QD6580_DEF_DATA2, QD6580_DEF_DATA2,
- &qd6580_tune_drive);
+ QD6580_DEF_DATA2, QD6580_DEF_DATA2);
+
+ mate->set_pio_mode = &qd6580_set_pio_mode;
+
+ probe_hwif_init(mate);
+
qd_write_reg(QD_DEF_CONTR,QD_CONTROL_PORT);
ide_proc_register_port(hwif);
diff --git a/drivers/ide/legacy/umc8672.c b/drivers/ide/legacy/umc8672.c
index d2862e638bc5..1151c92dd531 100644
--- a/drivers/ide/legacy/umc8672.c
+++ b/drivers/ide/legacy/umc8672.c
@@ -105,12 +105,11 @@ static void umc_set_speeds (u8 speeds[])
speeds[0], speeds[1], speeds[2], speeds[3]);
}
-static void tune_umc (ide_drive_t *drive, u8 pio)
+static void umc_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
unsigned long flags;
ide_hwgroup_t *hwgroup = ide_hwifs[HWIF(drive)->index^1].hwgroup;
- pio = ide_get_best_pio_mode(drive, pio, 4);
printk("%s: setting umc8672 to PIO mode%d (speed %d)\n",
drive->name, pio, pio_to_umc[pio]);
spin_lock_irqsave(&ide_lock, flags);
@@ -150,12 +149,12 @@ static int __init umc8672_probe(void)
hwif->chipset = ide_umc8672;
hwif->pio_mask = ATA_PIO4;
- hwif->tuneproc = &tune_umc;
+ hwif->set_pio_mode = &umc_set_pio_mode;
hwif->mate = mate;
mate->chipset = ide_umc8672;
mate->pio_mask = ATA_PIO4;
- mate->tuneproc = &tune_umc;
+ mate->set_pio_mode = &umc_set_pio_mode;
mate->mate = hwif;
mate->channel = 1;
diff --git a/drivers/ide/mips/au1xxx-ide.c b/drivers/ide/mips/au1xxx-ide.c
index 2ba6a054b861..85819ae20602 100644
--- a/drivers/ide/mips/au1xxx-ide.c
+++ b/drivers/ide/mips/au1xxx-ide.c
@@ -99,18 +99,12 @@ void auide_outsw(unsigned long port, void *addr, u32 count)
#endif
-static void auide_tune_drive(ide_drive_t *drive, byte pio)
+static void au1xxx_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
int mem_sttime;
int mem_stcfg;
u8 speed;
- /* get the best pio mode for the drive */
- pio = ide_get_best_pio_mode(drive, pio, 4);
-
- printk(KERN_INFO "%s: setting Au1XXX IDE to PIO mode%d\n",
- drive->name, pio);
-
mem_sttime = 0;
mem_stcfg = au_readl(MEM_STCFG2);
@@ -175,7 +169,7 @@ static void auide_tune_drive(ide_drive_t *drive, byte pio)
ide_config_drive_speed(drive, speed);
}
-static int auide_tune_chipset (ide_drive_t *drive, u8 speed)
+static int auide_tune_chipset(ide_drive_t *drive, const u8 speed)
{
int mem_sttime;
int mem_stcfg;
@@ -183,11 +177,6 @@ static int auide_tune_chipset (ide_drive_t *drive, u8 speed)
mem_sttime = 0;
mem_stcfg = au_readl(MEM_STCFG2);
- if (speed >= XFER_PIO_0 && speed <= XFER_PIO_4) {
- auide_tune_drive(drive, speed - XFER_PIO_0);
- return 0;
- }
-
switch(speed) {
#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
case XFER_MW_DMA_2:
@@ -712,7 +701,7 @@ static int au_ide_probe(struct device *dev)
hwif->OUTSW = auide_outsw;
#endif
- hwif->tuneproc = &auide_tune_drive;
+ hwif->set_pio_mode = &au1xxx_set_pio_mode;
hwif->speedproc = &auide_tune_chipset;
#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c
index 74432830abf7..0d5f62c5dfae 100644
--- a/drivers/ide/pci/aec62xx.c
+++ b/drivers/ide/pci/aec62xx.c
@@ -87,12 +87,11 @@ static u8 pci_bus_clock_list_ultra (u8 speed, struct chipset_bus_clock_list_entr
return chipset_table->ultra_settings;
}
-static int aec6210_tune_chipset (ide_drive_t *drive, u8 xferspeed)
+static int aec6210_tune_chipset(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
u16 d_conf = 0;
- u8 speed = ide_rate_filter(drive, xferspeed);
u8 ultra = 0, ultra_conf = 0;
u8 tmp0 = 0, tmp1 = 0, tmp2 = 0;
unsigned long flags;
@@ -115,11 +114,10 @@ static int aec6210_tune_chipset (ide_drive_t *drive, u8 xferspeed)
return(ide_config_drive_speed(drive, speed));
}
-static int aec6260_tune_chipset (ide_drive_t *drive, u8 xferspeed)
+static int aec6260_tune_chipset(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
- u8 speed = ide_rate_filter(drive, xferspeed);
u8 unit = (drive->select.b.unit & 0x01);
u8 tmp1 = 0, tmp2 = 0;
u8 ultra = 0, drive_conf = 0, ultra_conf = 0;
@@ -140,9 +138,8 @@ static int aec6260_tune_chipset (ide_drive_t *drive, u8 xferspeed)
return(ide_config_drive_speed(drive, speed));
}
-static void aec62xx_tune_drive (ide_drive_t *drive, u8 pio)
+static void aec_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4);
(void) HWIF(drive)->speedproc(drive, pio + XFER_PIO_0);
}
@@ -152,7 +149,7 @@ static int aec62xx_config_drive_xfer_rate (ide_drive_t *drive)
return 0;
if (ide_use_fast_pio(drive))
- aec62xx_tune_drive(drive, 255);
+ ide_set_max_pio(drive);
return -1;
}
@@ -203,7 +200,7 @@ static void __devinit init_hwif_aec62xx(ide_hwif_t *hwif)
u8 reg54 = 0, mask = hwif->channel ? 0xf0 : 0x0f;
unsigned long flags;
- hwif->tuneproc = &aec62xx_tune_drive;
+ hwif->set_pio_mode = &aec_set_pio_mode;
if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF) {
if(hwif->mate)
diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c
index 20ebe3b7049c..d04b966b4347 100644
--- a/drivers/ide/pci/alim15x3.c
+++ b/drivers/ide/pci/alim15x3.c
@@ -1,5 +1,5 @@
/*
- * linux/drivers/ide/pci/alim15x3.c Version 0.25 Jun 9 2007
+ * linux/drivers/ide/pci/alim15x3.c Version 0.26 Jul 14 2007
*
* Copyright (C) 1998-2000 Michel Aubry, Maintainer
* Copyright (C) 1998-2000 Andrzej Krzysztofowicz, Maintainer
@@ -283,17 +283,14 @@ static int ali_get_info (char *buffer, char **addr, off_t offset, int count)
#endif /* defined(DISPLAY_ALI_TIMINGS) && defined(CONFIG_IDE_PROC_FS) */
/**
- * ali15x3_tune_pio - set up chipset for PIO mode
- * @drive: drive to tune
- * @pio: desired mode
- *
- * Select the best PIO mode for the drive in question.
- * Then program the controller for this mode.
+ * ali_tune_pio - set host controller for PIO mode
+ * @drive: drive
+ * @pio: PIO mode number
*
- * Returns the PIO mode programmed.
+ * Program the controller for the given PIO mode.
*/
-
-static u8 ali15x3_tune_pio (ide_drive_t *drive, u8 pio)
+
+static void ali_tune_pio(ide_drive_t *drive, const u8 pio)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
@@ -306,7 +303,6 @@ static u8 ali15x3_tune_pio (ide_drive_t *drive, u8 pio)
u8 cd_dma_fifo = 0;
int unit = drive->select.b.unit & 1;
- pio = ide_get_best_pio_mode(drive, pio, 5);
s_time = ide_pio_timings[pio].setup_time;
a_time = ide_pio_timings[pio].active_time;
if ((s_clc = (s_time * bus_speed + 999) / 1000) >= 8)
@@ -359,22 +355,20 @@ static u8 ali15x3_tune_pio (ide_drive_t *drive, u8 pio)
* { 25, 70, 25 }, PIO Mode 4 with IORDY ns
* { 20, 50, 30 } PIO Mode 5 with IORDY (nonstandard)
*/
-
- return pio;
}
/**
- * ali15x3_tune_drive - set up drive for PIO mode
+ * ali_set_pio_mode - set up drive for PIO mode
* @drive: drive to tune
* @pio: desired mode
*
- * Program the controller with the best PIO timing for the given drive.
+ * Program the controller with the desired PIO timing for the given drive.
* Then set up the drive itself.
*/
-static void ali15x3_tune_drive (ide_drive_t *drive, u8 pio)
+static void ali_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- pio = ali15x3_tune_pio(drive, pio);
+ ali_tune_pio(drive, pio);
(void) ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
@@ -409,22 +403,24 @@ static u8 ali_udma_filter(ide_drive_t *drive)
/**
* ali15x3_tune_chipset - set up chipset/drive for new speed
* @drive: drive to configure for
- * @xferspeed: desired speed
+ * @speed: desired speed
*
* Configure the hardware for the desired IDE transfer mode.
* We also do the needed drive configuration through helpers
*/
-
-static int ali15x3_tune_chipset (ide_drive_t *drive, u8 xferspeed)
+
+static int ali15x3_tune_chipset(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
- u8 speed = ide_rate_filter(drive, xferspeed);
u8 speed1 = speed;
u8 unit = (drive->select.b.unit & 0x01);
u8 tmpbyte = 0x00;
int m5229_udma = (hwif->channel) ? 0x57 : 0x56;
+ if (speed < XFER_PIO_0)
+ return 1;
+
if (speed == XFER_UDMA_6)
speed1 = 0x47;
@@ -437,8 +433,9 @@ static int ali15x3_tune_chipset (ide_drive_t *drive, u8 xferspeed)
tmpbyte &= ultra_enable;
pci_write_config_byte(dev, m5229_udma, tmpbyte);
- if (speed < XFER_SW_DMA_0)
- (void) ali15x3_tune_pio(drive, speed - XFER_PIO_0);
+ /*
+ * FIXME: Oh, my... DMA timings are never set.
+ */
} else {
pci_read_config_byte(dev, m5229_udma, &tmpbyte);
tmpbyte &= (0x0f << ((1-unit) << 2));
@@ -471,7 +468,7 @@ static int ali15x3_config_drive_for_dma(ide_drive_t *drive)
if (ide_tune_dma(drive))
return 0;
- ali15x3_tune_drive(drive, 255);
+ ide_set_max_pio(drive);
return -1;
}
@@ -701,7 +698,7 @@ static u8 __devinit ata66_ali15x3(ide_hwif_t *hwif)
static void __devinit init_hwif_common_ali15x3 (ide_hwif_t *hwif)
{
hwif->autodma = 0;
- hwif->tuneproc = &ali15x3_tune_drive;
+ hwif->set_pio_mode = &ali_set_pio_mode;
hwif->speedproc = &ali15x3_tune_chipset;
hwif->udma_filter = &ali_udma_filter;
diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c
index 06c15a6a3e7d..513205e52ad2 100644
--- a/drivers/ide/pci/amd74xx.c
+++ b/drivers/ide/pci/amd74xx.c
@@ -1,5 +1,5 @@
/*
- * Version 2.21
+ * Version 2.22
*
* AMD 755/756/766/8111 and nVidia nForce/2/2s/3/3s/CK804/MCP04
* IDE driver for Linux.
@@ -234,7 +234,7 @@ static void amd_set_speed(struct pci_dev *dev, unsigned char dn, struct ide_timi
* by upper layers.
*/
-static int amd_set_drive(ide_drive_t *drive, u8 speed)
+static int amd_set_drive(ide_drive_t *drive, const u8 speed)
{
ide_drive_t *peer = HWIF(drive)->drives + (~drive->dn & 1);
struct ide_timing t, p;
@@ -266,32 +266,21 @@ static int amd_set_drive(ide_drive_t *drive, u8 speed)
}
/*
- * amd74xx_tune_drive() is a callback from upper layers for
- * PIO-only tuning.
+ * amd_set_pio_mode() is a callback from upper layers for PIO-only tuning.
*/
-static void amd74xx_tune_drive(ide_drive_t *drive, u8 pio)
+static void amd_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- if (pio == 255)
- pio = ide_get_best_pio_mode(drive, 255, 5);
-
- amd_set_drive(drive, XFER_PIO_0 + min_t(byte, pio, 5));
+ amd_set_drive(drive, XFER_PIO_0 + pio);
}
static int amd74xx_ide_dma_check(ide_drive_t *drive)
{
- u8 speed = ide_max_dma_mode(drive);
-
- if (speed == 0) {
- amd74xx_tune_drive(drive, 255);
- return -1;
- }
-
- amd_set_drive(drive, speed);
-
- if (drive->autodma)
+ if (ide_tune_dma(drive))
return 0;
+ ide_set_max_pio(drive);
+
return -1;
}
@@ -409,7 +398,7 @@ static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif)
hwif->autodma = 0;
- hwif->tuneproc = &amd74xx_tune_drive;
+ hwif->set_pio_mode = &amd_set_pio_mode;
hwif->speedproc = &amd_set_drive;
for (i = 0; i < 2; i++) {
diff --git a/drivers/ide/pci/atiixp.c b/drivers/ide/pci/atiixp.c
index 1725aa402d98..178876a3afca 100644
--- a/drivers/ide/pci/atiixp.c
+++ b/drivers/ide/pci/atiixp.c
@@ -153,9 +153,8 @@ static void atiixp_tune_pio(ide_drive_t *drive, u8 pio)
spin_unlock_irqrestore(&atiixp_lock, flags);
}
-static void atiixp_tuneproc(ide_drive_t *drive, u8 pio)
+static void atiixp_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4);
atiixp_tune_pio(drive, pio);
(void)ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
@@ -163,28 +162,21 @@ static void atiixp_tuneproc(ide_drive_t *drive, u8 pio)
/**
* atiixp_tune_chipset - tune a ATIIXP interface
* @drive: IDE drive to tune
- * @xferspeed: speed to configure
+ * @speed: speed to configure
*
* Set a ATIIXP interface channel to the desired speeds. This involves
* requires the right timing data into the ATIIXP configuration space
* then setting the drive parameters appropriately
*/
-static int atiixp_speedproc(ide_drive_t *drive, u8 xferspeed)
+static int atiixp_speedproc(ide_drive_t *drive, const u8 speed)
{
struct pci_dev *dev = drive->hwif->pci_dev;
unsigned long flags;
int timing_shift = (drive->dn & 2) ? 16 : 0 + (drive->dn & 1) ? 0 : 8;
u32 tmp32;
u16 tmp16;
- u8 speed, pio;
-
- speed = ide_rate_filter(drive, xferspeed);
-
- if (speed >= XFER_PIO_0 && speed <= XFER_PIO_4) {
- atiixp_tune_pio(drive, speed - XFER_PIO_0);
- return ide_config_drive_speed(drive, speed);
- }
+ u8 pio;
spin_lock_irqsave(&atiixp_lock, flags);
@@ -233,7 +225,7 @@ static int atiixp_dma_check(ide_drive_t *drive)
return 0;
if (ide_use_fast_pio(drive))
- atiixp_tuneproc(drive, 255);
+ ide_set_max_pio(drive);
return -1;
}
@@ -256,7 +248,7 @@ static void __devinit init_hwif_atiixp(ide_hwif_t *hwif)
hwif->irq = ch ? 15 : 14;
hwif->autodma = 0;
- hwif->tuneproc = &atiixp_tuneproc;
+ hwif->set_pio_mode = &atiixp_set_pio_mode;
hwif->speedproc = &atiixp_speedproc;
hwif->drives[0].autotune = 1;
hwif->drives[1].autotune = 1;
@@ -325,7 +317,7 @@ static struct pci_device_id atiixp_pci_tbl[] = {
{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
- { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
+ { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ 0, },
};
MODULE_DEVICE_TABLE(pci, atiixp_pci_tbl);
diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c
index 9689494efa24..f369645e4d16 100644
--- a/drivers/ide/pci/cmd640.c
+++ b/drivers/ide/pci/cmd640.c
@@ -628,45 +628,40 @@ static void cmd640_set_mode (unsigned int index, u8 pio_mode, unsigned int cycle
program_drive_counts (index);
}
-/*
- * Drive PIO mode selection:
- */
-static void cmd640_tune_drive (ide_drive_t *drive, u8 mode_wanted)
+static void cmd640_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
unsigned int index = 0, cycle_time;
u8 b;
while (drive != cmd_drives[index]) {
if (++index > 3) {
- printk("%s: bad news in cmd640_tune_drive\n", drive->name);
+ printk(KERN_ERR "%s: bad news in %s\n",
+ drive->name, __FUNCTION__);
return;
}
}
- switch (mode_wanted) {
+ switch (pio) {
case 6: /* set fast-devsel off */
case 7: /* set fast-devsel on */
- mode_wanted &= 1;
b = get_cmd640_reg(CNTRL) & ~0x27;
- if (mode_wanted)
+ if (pio & 1)
b |= 0x27;
put_cmd640_reg(CNTRL, b);
- printk("%s: %sabled cmd640 fast host timing (devsel)\n", drive->name, mode_wanted ? "en" : "dis");
+ printk("%s: %sabled cmd640 fast host timing (devsel)\n", drive->name, (pio & 1) ? "en" : "dis");
return;
case 8: /* set prefetch off */
case 9: /* set prefetch on */
- mode_wanted &= 1;
- set_prefetch_mode(index, mode_wanted);
- printk("%s: %sabled cmd640 prefetch\n", drive->name, mode_wanted ? "en" : "dis");
+ set_prefetch_mode(index, pio & 1);
+ printk("%s: %sabled cmd640 prefetch\n", drive->name, (pio & 1) ? "en" : "dis");
return;
}
- mode_wanted = ide_get_best_pio_mode(drive, mode_wanted, 5);
- cycle_time = ide_pio_cycle_time(drive, mode_wanted);
- cmd640_set_mode(index, mode_wanted, cycle_time);
+ cycle_time = ide_pio_cycle_time(drive, pio);
+ cmd640_set_mode(index, pio, cycle_time);
printk("%s: selected cmd640 PIO mode%d (%dns)",
- drive->name, mode_wanted, cycle_time);
+ drive->name, pio, cycle_time);
display_clocks(index);
}
@@ -766,8 +761,10 @@ int __init ide_probe_for_cmd640x (void)
cmd_hwif0->name, 'a' + cmd640_chip_version - 1, bus_type, cfr);
cmd_hwif0->chipset = ide_cmd640;
#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
+ cmd_hwif0->host_flags = IDE_HFLAG_ABUSE_PREFETCH |
+ IDE_HFLAG_ABUSE_FAST_DEVSEL;
cmd_hwif0->pio_mask = ATA_PIO5;
- cmd_hwif0->tuneproc = &cmd640_tune_drive;
+ cmd_hwif0->set_pio_mode = &cmd640_set_pio_mode;
#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
/*
@@ -822,8 +819,10 @@ int __init ide_probe_for_cmd640x (void)
cmd_hwif1->mate = cmd_hwif0;
cmd_hwif1->channel = 1;
#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
+ cmd_hwif1->host_flags = IDE_HFLAG_ABUSE_PREFETCH |
+ IDE_HFLAG_ABUSE_FAST_DEVSEL;
cmd_hwif1->pio_mask = ATA_PIO5;
- cmd_hwif1->tuneproc = &cmd640_tune_drive;
+ cmd_hwif1->set_pio_mode = &cmd640_set_pio_mode;
#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
}
printk(KERN_INFO "%s: %sserialized, secondary interface %s\n", cmd_hwif1->name,
diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c
index 0e3b5de26e69..0b568c60f926 100644
--- a/drivers/ide/pci/cmd64x.c
+++ b/drivers/ide/pci/cmd64x.c
@@ -214,28 +214,25 @@ static void program_cycle_times (ide_drive_t *drive, int cycle_time, int active_
}
/*
- * This routine selects drive's best PIO mode and writes into the chipset
- * registers setup/active/recovery timings.
+ * This routine writes into the chipset registers
+ * PIO setup/active/recovery timings.
*/
-static u8 cmd64x_tune_pio (ide_drive_t *drive, u8 mode_wanted)
+static void cmd64x_tune_pio(ide_drive_t *drive, const u8 pio)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
unsigned int cycle_time;
- u8 pio_mode, setup_count, arttim = 0;
+ u8 setup_count, arttim = 0;
+
static const u8 setup_values[] = {0x40, 0x40, 0x40, 0x80, 0, 0xc0};
static const u8 arttim_regs[4] = {ARTTIM0, ARTTIM1, ARTTIM23, ARTTIM23};
- pio_mode = ide_get_best_pio_mode(drive, mode_wanted, 5);
- cycle_time = ide_pio_cycle_time(drive, pio_mode);
-
- cmdprintk("%s: PIO mode wanted %d, selected %d (%d ns)\n",
- drive->name, mode_wanted, pio_mode, cycle_time);
+ cycle_time = ide_pio_cycle_time(drive, pio);
program_cycle_times(drive, cycle_time,
- ide_pio_timings[pio_mode].active_time);
+ ide_pio_timings[pio].active_time);
- setup_count = quantize_timing(ide_pio_timings[pio_mode].setup_time,
+ setup_count = quantize_timing(ide_pio_timings[pio].setup_time,
1000 / system_bus_clock());
/*
@@ -266,16 +263,14 @@ static u8 cmd64x_tune_pio (ide_drive_t *drive, u8 mode_wanted)
arttim |= setup_values[setup_count];
(void) pci_write_config_byte(dev, arttim_regs[drive->dn], arttim);
cmdprintk("Write 0x%02x to reg 0x%x\n", arttim, arttim_regs[drive->dn]);
-
- return pio_mode;
}
/*
* Attempts to set drive's PIO mode.
- * Special cases are 8: prefetch off, 9: prefetch on (both never worked),
- * and 255: auto-select best mode (used at boot time).
+ * Special cases are 8: prefetch off, 9: prefetch on (both never worked)
*/
-static void cmd64x_tune_drive (ide_drive_t *drive, u8 pio)
+
+static void cmd64x_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
/*
* Filter out the prefetch control values
@@ -284,19 +279,17 @@ static void cmd64x_tune_drive (ide_drive_t *drive, u8 pio)
if (pio == 8 || pio == 9)
return;
- pio = cmd64x_tune_pio(drive, pio);
+ cmd64x_tune_pio(drive, pio);
(void) ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
-static int cmd64x_tune_chipset (ide_drive_t *drive, u8 speed)
+static int cmd64x_tune_chipset(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
u8 unit = drive->dn & 0x01;
u8 regU = 0, pciU = hwif->channel ? UDIDETCR1 : UDIDETCR0;
- speed = ide_rate_filter(drive, speed);
-
if (speed >= XFER_SW_DMA_0) {
(void) pci_read_config_byte(dev, pciU, &regU);
regU &= ~(unit ? 0xCA : 0x35);
@@ -330,14 +323,6 @@ static int cmd64x_tune_chipset (ide_drive_t *drive, u8 speed)
case XFER_MW_DMA_0:
program_cycle_times(drive, 480, 215);
break;
- case XFER_PIO_5:
- case XFER_PIO_4:
- case XFER_PIO_3:
- case XFER_PIO_2:
- case XFER_PIO_1:
- case XFER_PIO_0:
- (void) cmd64x_tune_pio(drive, speed - XFER_PIO_0);
- break;
default:
return 1;
}
@@ -354,7 +339,7 @@ static int cmd64x_config_drive_for_dma (ide_drive_t *drive)
return 0;
if (ide_use_fast_pio(drive))
- cmd64x_tune_drive(drive, 255);
+ ide_set_max_pio(drive);
return -1;
}
@@ -538,7 +523,7 @@ static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif)
pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
- hwif->tuneproc = &cmd64x_tune_drive;
+ hwif->set_pio_mode = &cmd64x_set_pio_mode;
hwif->speedproc = &cmd64x_tune_chipset;
hwif->drives[0].autotune = hwif->drives[1].autotune = 1;
@@ -622,6 +607,7 @@ static ide_pci_device_t cmd64x_chipsets[] __devinitdata = {
.autodma = AUTODMA,
.enablebits = {{0x00,0x00,0x00}, {0x51,0x08,0x08}},
.bootable = ON_BOARD,
+ .host_flags = IDE_HFLAG_ABUSE_PREFETCH,
.pio_mask = ATA_PIO5,
.udma_mask = 0x00, /* no udma */
},{ /* 1 */
@@ -632,6 +618,7 @@ static ide_pci_device_t cmd64x_chipsets[] __devinitdata = {
.autodma = AUTODMA,
.enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
.bootable = ON_BOARD,
+ .host_flags = IDE_HFLAG_ABUSE_PREFETCH,
.pio_mask = ATA_PIO5,
.udma_mask = 0x07, /* udma0-2 */
},{ /* 2 */
@@ -642,6 +629,7 @@ static ide_pci_device_t cmd64x_chipsets[] __devinitdata = {
.autodma = AUTODMA,
.enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
.bootable = ON_BOARD,
+ .host_flags = IDE_HFLAG_ABUSE_PREFETCH,
.pio_mask = ATA_PIO5,
.udma_mask = 0x1f, /* udma0-4 */
},{ /* 3 */
@@ -652,6 +640,7 @@ static ide_pci_device_t cmd64x_chipsets[] __devinitdata = {
.autodma = AUTODMA,
.enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
.bootable = ON_BOARD,
+ .host_flags = IDE_HFLAG_ABUSE_PREFETCH,
.pio_mask = ATA_PIO5,
.udma_mask = 0x3f, /* udma0-5 */
}
diff --git a/drivers/ide/pci/cs5520.c b/drivers/ide/pci/cs5520.c
index b89e81656875..1217d2a747fb 100644
--- a/drivers/ide/pci/cs5520.c
+++ b/drivers/ide/pci/cs5520.c
@@ -66,32 +66,13 @@ static struct pio_clocks cs5520_pio_clocks[]={
{1, 2, 1}
};
-static int cs5520_tune_chipset(ide_drive_t *drive, u8 xferspeed)
+static void cs5520_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *pdev = hwif->pci_dev;
- u8 speed = min((u8)XFER_PIO_4, xferspeed);
- int pio = speed;
- u8 reg;
int controller = drive->dn > 1 ? 1 : 0;
- int error;
-
- switch(speed)
- {
- case XFER_PIO_4:
- case XFER_PIO_3:
- case XFER_PIO_2:
- case XFER_PIO_1:
- case XFER_PIO_0:
- pio -= XFER_PIO_0;
- break;
- default:
- pio = 0;
- printk(KERN_ERR "cs55x0: bad ide timing.\n");
- }
-
- printk("PIO clocking = %d\n", pio);
-
+ u8 reg;
+
/* FIXME: if DMA = 1 do we need to set the DMA bit here ? */
/* 8bit CAT/CRT - 8bit command timing for channel */
@@ -115,25 +96,28 @@ static int cs5520_tune_chipset(ide_drive_t *drive, u8 xferspeed)
reg = inb(hwif->dma_base + 0x02 + 8*controller);
reg |= 1<<((drive->dn&1)+5);
outb(reg, hwif->dma_base + 0x02 + 8*controller);
-
- error = ide_config_drive_speed(drive, speed);
- /* ATAPI is harder so leave it for now */
- if(!error && drive->media == ide_disk)
- error = hwif->ide_dma_on(drive);
- return error;
-}
-
-static void cs5520_tune_drive(ide_drive_t *drive, u8 pio)
+ (void)ide_config_drive_speed(drive, XFER_PIO_0 + pio);
+}
+
+static int cs5520_tune_chipset(ide_drive_t *drive, const u8 speed)
{
- pio = ide_get_best_pio_mode(drive, pio, 4);
- cs5520_tune_chipset(drive, (XFER_PIO_0 + pio));
+ printk(KERN_ERR "cs55x0: bad ide timing.\n");
+
+ cs5520_set_pio_mode(drive, 0);
+
+ /*
+ * FIXME: this is incorrect to return zero here but
+ * since all users of ide_set_xfer_rate() ignore
+ * the return value it is not a problem currently
+ */
+ return 0;
}
static int cs5520_config_drive_xfer_rate(ide_drive_t *drive)
{
/* Tune the drive for PIO modes up to PIO 4 */
- cs5520_tune_drive(drive, 255);
+ ide_set_max_pio(drive);
/* Then tell the core to use DMA operations */
return 0;
@@ -165,7 +149,7 @@ static int cs5520_dma_on(ide_drive_t *drive)
static void __devinit init_hwif_cs5520(ide_hwif_t *hwif)
{
- hwif->tuneproc = &cs5520_tune_drive;
+ hwif->set_pio_mode = &cs5520_set_pio_mode;
hwif->speedproc = &cs5520_tune_chipset;
hwif->ide_dma_check = &cs5520_config_drive_xfer_rate;
hwif->ide_dma_on = &cs5520_dma_on;
@@ -179,7 +163,8 @@ static void __devinit init_hwif_cs5520(ide_hwif_t *hwif)
hwif->drives[1].autotune = 1;
return;
}
-
+
+ /* ATAPI is harder so leave it for now */
hwif->atapi_dma = 0;
hwif->ultra_mask = 0;
hwif->swdma_mask = 0;
diff --git a/drivers/ide/pci/cs5530.c b/drivers/ide/pci/cs5530.c
index e5949b1d3fb0..741507b4cd93 100644
--- a/drivers/ide/pci/cs5530.c
+++ b/drivers/ide/pci/cs5530.c
@@ -71,19 +71,18 @@ static void cs5530_tunepio(ide_drive_t *drive, u8 pio)
}
/**
- * cs5530_tuneproc - select/set PIO modes
+ * cs5530_set_pio_mode - set PIO mode
+ * @drive: drive
+ * @pio: PIO mode number
*
- * cs5530_tuneproc() handles selection/setting of PIO modes
- * for both the chipset and drive.
+ * Handles setting of PIO mode for both the chipset and drive.
*
- * The ide_init_cs5530() routine guarantees that all drives
+ * The init_hwif_cs5530() routine guarantees that all drives
* will have valid default PIO timings set up before we get here.
*/
-static void cs5530_tuneproc (ide_drive_t *drive, u8 pio) /* pio=255 means "autotune" */
+static void cs5530_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4);
-
if (cs5530_set_xfer_mode(drive, XFER_PIO_0 + pio) == 0)
cs5530_tunepio(drive, pio);
}
@@ -143,13 +142,11 @@ static int cs5530_config_dma(ide_drive_t *drive)
return 1;
}
-static int cs5530_tune_chipset(ide_drive_t *drive, u8 mode)
+static int cs5530_tune_chipset(ide_drive_t *drive, const u8 mode)
{
unsigned long basereg;
unsigned int reg, timings = 0;
- mode = ide_rate_filter(drive, mode);
-
/*
* Tell the drive to switch to the new mode; abort on failure.
*/
@@ -166,13 +163,6 @@ static int cs5530_tune_chipset(ide_drive_t *drive, u8 mode)
case XFER_MW_DMA_0: timings = 0x00077771; break;
case XFER_MW_DMA_1: timings = 0x00012121; break;
case XFER_MW_DMA_2: timings = 0x00002020; break;
- case XFER_PIO_4:
- case XFER_PIO_3:
- case XFER_PIO_2:
- case XFER_PIO_1:
- case XFER_PIO_0:
- cs5530_tunepio(drive, mode - XFER_PIO_0);
- return 0;
default:
BUG();
break;
@@ -308,7 +298,7 @@ static void __devinit init_hwif_cs5530 (ide_hwif_t *hwif)
if (hwif->mate)
hwif->serialized = hwif->mate->serialized = 1;
- hwif->tuneproc = &cs5530_tuneproc;
+ hwif->set_pio_mode = &cs5530_set_pio_mode;
hwif->speedproc = &cs5530_tune_chipset;
basereg = CS5530_BASEREG(hwif);
diff --git a/drivers/ide/pci/cs5535.c b/drivers/ide/pci/cs5535.c
index 082ca7da2cbc..383b7eccbcbb 100644
--- a/drivers/ide/pci/cs5535.c
+++ b/drivers/ide/pci/cs5535.c
@@ -75,7 +75,7 @@ static unsigned int cs5535_udma_timings[5] =
*
* cs5535_set_speed() configures the chipset to a new speed.
*/
-static void cs5535_set_speed(ide_drive_t *drive, u8 speed)
+static void cs5535_set_speed(ide_drive_t *drive, const u8 speed)
{
u32 reg = 0, dummy;
@@ -141,23 +141,22 @@ static void cs5535_set_speed(ide_drive_t *drive, u8 speed)
*/
static int cs5535_set_drive(ide_drive_t *drive, u8 speed)
{
- speed = ide_rate_filter(drive, speed);
ide_config_drive_speed(drive, speed);
cs5535_set_speed(drive, speed);
return 0;
}
-/****
- * cs5535_tuneproc - PIO setup
- * @drive: drive to set up
- * @pio: mode to use (255 for 'best possible')
+/**
+ * cs5535_set_pio_mode - PIO setup
+ * @drive: drive
+ * @pio: PIO mode number
*
* A callback from the upper layers for PIO-only tuning.
*/
-static void cs5535_tuneproc(ide_drive_t *drive, u8 pio)
+
+static void cs5535_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4);
ide_config_drive_speed(drive, XFER_PIO_0 + pio);
cs5535_set_speed(drive, XFER_PIO_0 + pio);
}
@@ -170,7 +169,7 @@ static int cs5535_dma_check(ide_drive_t *drive)
return 0;
if (ide_use_fast_pio(drive))
- cs5535_tuneproc(drive, 255);
+ ide_set_max_pio(drive);
return -1;
}
@@ -199,7 +198,7 @@ static void __devinit init_hwif_cs5535(ide_hwif_t *hwif)
hwif->autodma = 0;
- hwif->tuneproc = &cs5535_tuneproc;
+ hwif->set_pio_mode = &cs5535_set_pio_mode;
hwif->speedproc = &cs5535_set_drive;
hwif->ide_dma_check = &cs5535_dma_check;
diff --git a/drivers/ide/pci/cy82c693.c b/drivers/ide/pci/cy82c693.c
index daa36fcbc8ef..dc278025d318 100644
--- a/drivers/ide/pci/cy82c693.c
+++ b/drivers/ide/pci/cy82c693.c
@@ -97,9 +97,6 @@
#define CY82_INDEX_CHANNEL1 0x31
#define CY82_INDEX_TIMEOUT 0x32
-/* the max PIO mode - from datasheet */
-#define CY82C693_MAX_PIO 4
-
/* the min and max PCI bus speed in MHz - from datasheet */
#define CY82C963_MIN_BUS_SPEED 25
#define CY82C963_MAX_BUS_SPEED 33
@@ -148,9 +145,6 @@ static void compute_clocks (u8 pio, pio_clocks_t *p_pclk)
* so you can play with the idebus=xx parameter
*/
- if (pio > CY82C693_MAX_PIO)
- pio = CY82C693_MAX_PIO;
-
/* let's calc the address setup time clocks */
p_pclk->address_time = (u8)calc_clk(ide_pio_timings[pio].setup_time, bus_speed);
@@ -269,10 +263,7 @@ static int cy82c693_ide_dma_on (ide_drive_t *drive)
return __ide_dma_on(drive);
}
-/*
- * tune ide drive - set PIO mode
- */
-static void cy82c693_tune_drive (ide_drive_t *drive, u8 pio)
+static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
@@ -329,13 +320,6 @@ static void cy82c693_tune_drive (ide_drive_t *drive, u8 pio)
addrCtrl, pclk.time_16r, pclk.time_16w, pclk.time_8);
#endif /* CY82C693_DEBUG_LOGS */
- /* first let's calc the pio modes */
- pio = ide_get_best_pio_mode(drive, pio, CY82C693_MAX_PIO);
-
-#if CY82C693_DEBUG_INFO
- printk (KERN_INFO "%s: Selected PIO mode %d\n", drive->name, pio);
-#endif /* CY82C693_DEBUG_INFO */
-
/* let's calc the values for this PIO mode */
compute_clocks(pio, &pclk);
@@ -447,7 +431,7 @@ static void __devinit init_hwif_cy82c693(ide_hwif_t *hwif)
hwif->autodma = 0;
hwif->chipset = ide_cy82c693;
- hwif->tuneproc = &cy82c693_tune_drive;
+ hwif->set_pio_mode = &cy82c693_set_pio_mode;
if (!hwif->dma_base) {
hwif->drives[0].autotune = 1;
diff --git a/drivers/ide/pci/hpt34x.c b/drivers/ide/pci/hpt34x.c
index cb8fe5643d3b..a1bb10188fe5 100644
--- a/drivers/ide/pci/hpt34x.c
+++ b/drivers/ide/pci/hpt34x.c
@@ -43,10 +43,9 @@
#define HPT343_DEBUG_DRIVE_INFO 0
-static int hpt34x_tune_chipset (ide_drive_t *drive, u8 xferspeed)
+static int hpt34x_tune_chipset(ide_drive_t *drive, const u8 speed)
{
struct pci_dev *dev = HWIF(drive)->pci_dev;
- u8 speed = ide_rate_filter(drive, xferspeed);
u32 reg1= 0, tmp1 = 0, reg2 = 0, tmp2 = 0;
u8 hi_speed, lo_speed;
@@ -78,9 +77,8 @@ static int hpt34x_tune_chipset (ide_drive_t *drive, u8 xferspeed)
return(ide_config_drive_speed(drive, speed));
}
-static void hpt34x_tune_drive (ide_drive_t *drive, u8 pio)
+static void hpt34x_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 5);
(void) hpt34x_tune_chipset(drive, (XFER_PIO_0 + pio));
}
@@ -92,7 +90,7 @@ static int hpt34x_config_drive_xfer_rate (ide_drive_t *drive)
return -1;
if (ide_use_fast_pio(drive))
- hpt34x_tune_drive(drive, 255);
+ ide_set_max_pio(drive);
return -1;
}
@@ -146,7 +144,7 @@ static void __devinit init_hwif_hpt34x(ide_hwif_t *hwif)
hwif->autodma = 0;
- hwif->tuneproc = &hpt34x_tune_drive;
+ hwif->set_pio_mode = &hpt34x_set_pio_mode;
hwif->speedproc = &hpt34x_tune_chipset;
hwif->drives[0].autotune = 1;
hwif->drives[1].autotune = 1;
diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c
index 39f1c89f7c86..0e7d3b60d43c 100644
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -1,5 +1,5 @@
/*
- * linux/drivers/ide/pci/hpt366.c Version 1.12 Aug 19, 2007
+ * linux/drivers/ide/pci/hpt366.c Version 1.13 Sep 29, 2007
*
* Copyright (C) 1999-2003 Andre Hedrick <andre@linux-ide.org>
* Portions Copyright (C) 2001 Sun Microsystems, Inc.
@@ -114,7 +114,7 @@
* unify HPT36x/37x timing setup code and the speedproc handlers by joining
* the register setting lists into the table indexed by the clock selected
* - set the correct hwif->ultra_mask for each individual chip
- * - add UltraDMA mode filtering for the HPT37[24] based SATA cards
+ * - add Ultra and MW DMA mode filtering for the HPT37[24] based SATA cards
* Sergei Shtylyov, <sshtylyov@ru.mvista.com> or <source@mvista.com>
*/
@@ -562,6 +562,24 @@ static u8 hpt3xx_udma_filter(ide_drive_t *drive)
return check_in_drive_list(drive, bad_ata33) ? 0x00 : mask;
}
+static u8 hpt3xx_mdma_filter(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+ struct hpt_info *info = pci_get_drvdata(hwif->pci_dev);
+
+ switch (info->chip_type) {
+ case HPT372 :
+ case HPT372A:
+ case HPT372N:
+ case HPT374 :
+ if (ide_dev_is_sata(drive->id))
+ return 0x00;
+ /* Fall thru */
+ default:
+ return 0x07;
+ }
+}
+
static u32 get_speed_setting(u8 speed, struct hpt_info *info)
{
int i;
@@ -582,20 +600,15 @@ static u32 get_speed_setting(u8 speed, struct hpt_info *info)
return (*info->settings)[i];
}
-static int hpt36x_tune_chipset(ide_drive_t *drive, u8 xferspeed)
+static int hpt36x_tune_chipset(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
struct hpt_info *info = pci_get_drvdata(dev);
- u8 speed = ide_rate_filter(drive, xferspeed);
u8 itr_addr = drive->dn ? 0x44 : 0x40;
u32 old_itr = 0;
u32 itr_mask, new_itr;
- /* TODO: move this to ide_rate_filter() [ check ->atapi_dma ] */
- if (drive->media != ide_disk)
- speed = min_t(u8, speed, XFER_PIO_4);
-
itr_mask = speed < XFER_MW_DMA_0 ? 0x30070000 :
(speed < XFER_UDMA_0 ? 0xc0070000 : 0xc03800ff);
@@ -614,20 +627,15 @@ static int hpt36x_tune_chipset(ide_drive_t *drive, u8 xferspeed)
return ide_config_drive_speed(drive, speed);
}
-static int hpt37x_tune_chipset(ide_drive_t *drive, u8 xferspeed)
+static int hpt37x_tune_chipset(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
struct hpt_info *info = pci_get_drvdata(dev);
- u8 speed = ide_rate_filter(drive, xferspeed);
u8 itr_addr = 0x40 + (drive->dn * 4);
u32 old_itr = 0;
u32 itr_mask, new_itr;
- /* TODO: move this to ide_rate_filter() [ check ->atapi_dma ] */
- if (drive->media != ide_disk)
- speed = min_t(u8, speed, XFER_PIO_4);
-
itr_mask = speed < XFER_MW_DMA_0 ? 0x303c0000 :
(speed < XFER_UDMA_0 ? 0xc03c0000 : 0xc1c001ff);
@@ -654,9 +662,8 @@ static int hpt3xx_tune_chipset(ide_drive_t *drive, u8 speed)
return hpt36x_tune_chipset(drive, speed);
}
-static void hpt3xx_tune_drive(ide_drive_t *drive, u8 pio)
+static void hpt3xx_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4);
(void) hpt3xx_tune_chipset (drive, XFER_PIO_0 + pio);
}
@@ -718,7 +725,7 @@ static int hpt366_config_drive_xfer_rate(ide_drive_t *drive)
return 0;
if (ide_use_fast_pio(drive))
- hpt3xx_tune_drive(drive, 255);
+ ide_set_max_pio(drive);
return -1;
}
@@ -1249,7 +1256,7 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
/* Cache the channel's MISC. control registers' offset */
hwif->select_data = hwif->channel ? 0x54 : 0x50;
- hwif->tuneproc = &hpt3xx_tune_drive;
+ hwif->set_pio_mode = &hpt3xx_set_pio_mode;
hwif->speedproc = &hpt3xx_tune_chipset;
hwif->quirkproc = &hpt3xx_quirkproc;
hwif->intrproc = &hpt3xx_intrproc;
@@ -1257,6 +1264,7 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
hwif->busproc = &hpt3xx_busproc;
hwif->udma_filter = &hpt3xx_udma_filter;
+ hwif->mdma_filter = &hpt3xx_mdma_filter;
/*
* HPT3xxN chips have some complications:
diff --git a/drivers/ide/pci/it8213.c b/drivers/ide/pci/it8213.c
index 70b3245dbf62..76e91ff9420b 100644
--- a/drivers/ide/pci/it8213.c
+++ b/drivers/ide/pci/it8213.c
@@ -105,9 +105,8 @@ static void it8213_tune_pio(ide_drive_t *drive, const u8 pio)
spin_unlock_irqrestore(&tune_lock, flags);
}
-static void it8213_tuneproc(ide_drive_t *drive, u8 pio)
+static void it8213_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4);
it8213_tune_pio(drive, pio);
ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
@@ -115,20 +114,16 @@ static void it8213_tuneproc(ide_drive_t *drive, u8 pio)
/**
* it8213_tune_chipset - set controller timings
* @drive: Drive to set up
- * @xferspeed: speed we want to achieve
+ * @speed: speed we want to achieve
*
- * Tune the ITE chipset for the desired mode. If we can't achieve
- * the desired mode then tune for a lower one, but ultimately
- * make the thing work.
+ * Tune the ITE chipset for the desired mode.
*/
-static int it8213_tune_chipset (ide_drive_t *drive, u8 xferspeed)
+static int it8213_tune_chipset(ide_drive_t *drive, const u8 speed)
{
-
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
u8 maslave = 0x40;
- u8 speed = ide_rate_filter(drive, xferspeed);
int a_speed = 3 << (drive->dn * 4);
int u_flag = 1 << drive->dn;
int v_flag = 0x01 << drive->dn;
@@ -156,12 +151,6 @@ static int it8213_tune_chipset (ide_drive_t *drive, u8 xferspeed)
case XFER_MW_DMA_1:
case XFER_SW_DMA_2:
break;
- case XFER_PIO_4:
- case XFER_PIO_3:
- case XFER_PIO_2:
- case XFER_PIO_1:
- case XFER_PIO_0:
- break;
default:
return -1;
}
@@ -193,10 +182,7 @@ static int it8213_tune_chipset (ide_drive_t *drive, u8 xferspeed)
pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag);
}
- if (speed > XFER_PIO_4)
- it8213_tune_pio(drive, it8213_dma_2_pio(speed));
- else
- it8213_tune_pio(drive, speed - XFER_PIO_0);
+ it8213_tune_pio(drive, it8213_dma_2_pio(speed));
return ide_config_drive_speed(drive, speed);
}
@@ -216,7 +202,7 @@ static int it8213_config_drive_for_dma (ide_drive_t *drive)
if (ide_tune_dma(drive))
return 0;
- it8213_tuneproc(drive, 255);
+ ide_set_max_pio(drive);
return -1;
}
@@ -235,7 +221,7 @@ static void __devinit init_hwif_it8213(ide_hwif_t *hwif)
u8 reg42h = 0;
hwif->speedproc = &it8213_tune_chipset;
- hwif->tuneproc = &it8213_tuneproc;
+ hwif->set_pio_mode = &it8213_set_pio_mode;
hwif->autodma = 0;
diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c
index 9286c99e2ff0..758a98230cc5 100644
--- a/drivers/ide/pci/it821x.c
+++ b/drivers/ide/pci/it821x.c
@@ -274,9 +274,8 @@ static int it821x_tunepio(ide_drive_t *drive, u8 set_pio)
return ide_config_drive_speed(drive, XFER_PIO_0 + set_pio);
}
-static void it821x_tuneproc(ide_drive_t *drive, u8 pio)
+static void it821x_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4);
(void)it821x_tunepio(drive, pio);
}
@@ -405,32 +404,19 @@ static int it821x_dma_end(ide_drive_t *drive)
return ret;
}
-
/**
* it821x_tune_chipset - set controller timings
* @drive: Drive to set up
- * @xferspeed: speed we want to achieve
+ * @speed: speed we want to achieve
*
- * Tune the ITE chipset for the desired mode. If we can't achieve
- * the desired mode then tune for a lower one, but ultimately
- * make the thing work.
+ * Tune the ITE chipset for the desired mode.
*/
-static int it821x_tune_chipset (ide_drive_t *drive, byte xferspeed)
+static int it821x_tune_chipset(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = drive->hwif;
struct it821x_dev *itdev = ide_get_hwifdata(hwif);
- u8 speed = ide_rate_filter(drive, xferspeed);
-
- switch (speed) {
- case XFER_PIO_4:
- case XFER_PIO_3:
- case XFER_PIO_2:
- case XFER_PIO_1:
- case XFER_PIO_0:
- return it821x_tunepio(drive, speed - XFER_PIO_0);
- }
if (itdev->smart == 0) {
switch (speed) {
@@ -477,7 +463,7 @@ static int it821x_config_drive_for_dma (ide_drive_t *drive)
if (ide_tune_dma(drive))
return 0;
- it821x_tuneproc(drive, 255);
+ ide_set_max_pio(drive);
return -1;
}
@@ -644,7 +630,7 @@ static void __devinit init_hwif_it821x(ide_hwif_t *hwif)
}
hwif->speedproc = &it821x_tune_chipset;
- hwif->tuneproc = &it821x_tuneproc;
+ hwif->set_pio_mode = &it821x_set_pio_mode;
/* MWDMA/PIO clock switching for pass through mode */
if(!idev->smart) {
diff --git a/drivers/ide/pci/jmicron.c b/drivers/ide/pci/jmicron.c
index 65a0ff352b98..d379fbaf6743 100644
--- a/drivers/ide/pci/jmicron.c
+++ b/drivers/ide/pci/jmicron.c
@@ -83,26 +83,22 @@ static u8 __devinit ata66_jmicron(ide_hwif_t *hwif)
return ATA_CBL_PATA80;
}
-static void jmicron_tuneproc(ide_drive_t *drive, u8 pio)
+static void jmicron_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 5);
ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
/**
* jmicron_tune_chipset - set controller timings
* @drive: Drive to set up
- * @xferspeed: speed we want to achieve
+ * @speed: speed we want to achieve
*
* As the JMicron snoops for timings all we actually need to do is
- * make sure we don't set an invalid mode. We do need to honour
- * the cable detect here.
+ * set the transfer mode on the device.
*/
-static int jmicron_tune_chipset (ide_drive_t *drive, byte xferspeed)
+static int jmicron_tune_chipset(ide_drive_t *drive, const u8 speed)
{
- u8 speed = ide_rate_filter(drive, xferspeed);
-
return ide_config_drive_speed(drive, speed);
}
@@ -119,7 +115,7 @@ static int jmicron_config_drive_for_dma (ide_drive_t *drive)
if (ide_tune_dma(drive))
return 0;
- jmicron_tuneproc(drive, 255);
+ ide_set_max_pio(drive);
return -1;
}
@@ -134,7 +130,7 @@ static int jmicron_config_drive_for_dma (ide_drive_t *drive)
static void __devinit init_hwif_jmicron(ide_hwif_t *hwif)
{
hwif->speedproc = &jmicron_tune_chipset;
- hwif->tuneproc = &jmicron_tuneproc;
+ hwif->set_pio_mode = &jmicron_set_pio_mode;
hwif->drives[0].autotune = 1;
hwif->drives[1].autotune = 1;
@@ -160,22 +156,13 @@ fallback:
return;
}
-#define DECLARE_JMB_DEV(name_str) \
- { \
- .name = name_str, \
- .init_hwif = init_hwif_jmicron, \
- .autodma = AUTODMA, \
- .bootable = ON_BOARD, \
- .enablebits = { {0x40, 1, 1}, {0x40, 0x10, 0x10} }, \
- .pio_mask = ATA_PIO5, \
- }
-
-static ide_pci_device_t jmicron_chipsets[] __devinitdata = {
- /* 0 */ DECLARE_JMB_DEV("JMB361"),
- /* 1 */ DECLARE_JMB_DEV("JMB363"),
- /* 2 */ DECLARE_JMB_DEV("JMB365"),
- /* 3 */ DECLARE_JMB_DEV("JMB366"),
- /* 4 */ DECLARE_JMB_DEV("JMB368"),
+static ide_pci_device_t jmicron_chipset __devinitdata = {
+ .name = "JMB",
+ .init_hwif = init_hwif_jmicron,
+ .autodma = AUTODMA,
+ .bootable = ON_BOARD,
+ .enablebits = { { 0x40, 0x01, 0x01 }, { 0x40, 0x10, 0x10 } },
+ .pio_mask = ATA_PIO5,
};
/**
@@ -189,35 +176,29 @@ static ide_pci_device_t jmicron_chipsets[] __devinitdata = {
static int __devinit jmicron_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
- ide_setup_pci_device(dev, &jmicron_chipsets[id->driver_data]);
+ ide_setup_pci_device(dev, &jmicron_chipset);
return 0;
}
-/* If libata is configured, jmicron PCI quirk will configure it such
- * that the SATA ports are in AHCI function while the PATA ports are
- * in a separate IDE function. In such cases, match device class and
- * attach only to IDE. If libata isn't configured, keep the old
- * behavior for backward compatibility.
+/* All JMB PATA controllers have and will continue to have the same
+ * interface. Matching vendor and device class is enough for all
+ * current and future controllers if the controller is programmed
+ * properly.
+ *
+ * If libata is configured, jmicron PCI quirk programs the controller
+ * into the correct mode. If libata isn't configured, match known
+ * device IDs too to maintain backward compatibility.
*/
-#if defined(CONFIG_ATA) || defined(CONFIG_ATA_MODULE)
-#define JMB_CLASS PCI_CLASS_STORAGE_IDE << 8
-#define JMB_CLASS_MASK 0xffff00
-#else
-#define JMB_CLASS 0
-#define JMB_CLASS_MASK 0
-#endif
-
static struct pci_device_id jmicron_pci_tbl[] = {
- { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361,
- PCI_ANY_ID, PCI_ANY_ID, JMB_CLASS, JMB_CLASS_MASK, 0},
- { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363,
- PCI_ANY_ID, PCI_ANY_ID, JMB_CLASS, JMB_CLASS_MASK, 1},
- { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365,
- PCI_ANY_ID, PCI_ANY_ID, JMB_CLASS, JMB_CLASS_MASK, 2},
- { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366,
- PCI_ANY_ID, PCI_ANY_ID, JMB_CLASS, JMB_CLASS_MASK, 3},
- { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368,
- PCI_ANY_ID, PCI_ANY_ID, JMB_CLASS, JMB_CLASS_MASK, 4},
+#if !defined(CONFIG_ATA) && !defined(CONFIG_ATA_MODULE)
+ { PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB361) },
+ { PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB363) },
+ { PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB365) },
+ { PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB366) },
+ { PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB368) },
+#endif
+ { PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_STORAGE_IDE << 8, 0xffff00, 0 },
{ 0, },
};
diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c
index 3a2bb2723515..9fa06393469a 100644
--- a/drivers/ide/pci/opti621.c
+++ b/drivers/ide/pci/opti621.c
@@ -47,7 +47,7 @@
* The main problem with OPTi is that some timings for master
* and slave must be the same. For example, if you have master
* PIO 3 and slave PIO 0, driver have to set some timings of
- * master for PIO 0. Second problem is that opti621_tune_drive
+ * master for PIO 0. Second problem is that opti621_set_pio_mode
* got only one drive to set, but have to set both drives.
* This is solved in compute_pios. If you don't set
* the second drive, compute_pios use ide_get_best_pio_mode
@@ -103,7 +103,7 @@
#include <asm/io.h>
-#define OPTI621_MAX_PIO 3
+//#define OPTI621_MAX_PIO 3
/* In fact, I do not have any PIO 4 drive
* (address: 25 ns, data: 70 ns, recovery: 35 ns),
* but OPTi 82C621 is programmable and it can do (minimal values):
@@ -136,8 +136,8 @@ static int reg_base;
#define PIO_NOT_EXIST 254
#define PIO_DONT_KNOW 255
-/* there are stored pio numbers from other calls of opti621_tune_drive */
-static void compute_pios(ide_drive_t *drive, u8 pio)
+/* there are stored pio numbers from other calls of opti621_set_pio_mode */
+static void compute_pios(ide_drive_t *drive, const u8 pio)
/* Store values into drive->drive_data
* second_contr - 0 for primary controller, 1 for secondary
* slave_drive - 0 -> pio is for master, 1 -> pio is for slave
@@ -147,12 +147,13 @@ static void compute_pios(ide_drive_t *drive, u8 pio)
int d;
ide_hwif_t *hwif = HWIF(drive);
- drive->drive_data = ide_get_best_pio_mode(drive, pio, OPTI621_MAX_PIO);
+ drive->drive_data = pio;
+
for (d = 0; d < 2; ++d) {
drive = &hwif->drives[d];
if (drive->present) {
if (drive->drive_data == PIO_DONT_KNOW)
- drive->drive_data = ide_get_best_pio_mode(drive, 255, OPTI621_MAX_PIO);
+ drive->drive_data = ide_get_best_pio_mode(drive, 255, 3);
#ifdef OPTI621_DEBUG
printk("%s: Selected PIO mode %d\n",
drive->name, drive->drive_data);
@@ -240,8 +241,7 @@ static void compute_clocks(int pio, pio_clocks_t *clks)
}
-/* Main tune procedure, called from tuneproc. */
-static void opti621_tune_drive (ide_drive_t *drive, u8 pio)
+static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
/* primary and secondary drives share some registers,
* so we have to program both drives
@@ -331,7 +331,8 @@ static void __devinit init_hwif_opti621 (ide_hwif_t *hwif)
hwif->autodma = 0;
hwif->drives[0].drive_data = PIO_DONT_KNOW;
hwif->drives[1].drive_data = PIO_DONT_KNOW;
- hwif->tuneproc = &opti621_tune_drive;
+
+ hwif->set_pio_mode = &opti621_set_pio_mode;
if (!(hwif->dma_base))
return;
diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c
index 7b0e479c355c..5fb1eedc8194 100644
--- a/drivers/ide/pci/pdc202xx_new.c
+++ b/drivers/ide/pci/pdc202xx_new.c
@@ -146,14 +146,12 @@ static struct udma_timing {
{ 0x1a, 0x01, 0xcb }, /* UDMA mode 6 */
};
-static int pdcnew_tune_chipset(ide_drive_t *drive, u8 speed)
+static int pdcnew_tune_chipset(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
u8 adj = (drive->dn & 1) ? 0x08 : 0x00;
int err;
- speed = ide_rate_filter(drive, speed);
-
/*
* Issue SETFEATURES_XFER to the drive first. PDC202xx hardware will
* automatically set the timing registers based on 100 MHz PLL output.
@@ -217,9 +215,8 @@ static int pdcnew_tune_chipset(ide_drive_t *drive, u8 speed)
return err;
}
-static void pdcnew_tune_drive(ide_drive_t *drive, u8 pio)
+static void pdcnew_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4);
(void)pdcnew_tune_chipset(drive, XFER_PIO_0 + pio);
}
@@ -239,7 +236,7 @@ static int pdcnew_config_drive_xfer_rate(ide_drive_t *drive)
return 0;
if (ide_use_fast_pio(drive))
- pdcnew_tune_drive(drive, 255);
+ ide_set_max_pio(drive);
return -1;
}
@@ -492,7 +489,8 @@ static void __devinit init_hwif_pdc202new(ide_hwif_t *hwif)
{
hwif->autodma = 0;
- hwif->tuneproc = &pdcnew_tune_drive;
+ hwif->set_pio_mode = &pdcnew_set_pio_mode;
+
hwif->quirkproc = &pdcnew_quirkproc;
hwif->speedproc = &pdcnew_tune_chipset;
hwif->resetproc = &pdcnew_reset;
@@ -524,44 +522,52 @@ static int __devinit init_setup_pdcnew(struct pci_dev *dev, ide_pci_device_t *d)
return ide_setup_pci_device(dev, d);
}
-static int __devinit init_setup_pdc20270(struct pci_dev *dev,
- ide_pci_device_t *d)
+static int __devinit init_setup_pdc20270(struct pci_dev *dev, ide_pci_device_t *d)
{
- struct pci_dev *findev = NULL;
- int ret;
+ struct pci_dev *bridge = dev->bus->self;
+
+ if (bridge != NULL &&
+ bridge->vendor == PCI_VENDOR_ID_DEC &&
+ bridge->device == PCI_DEVICE_ID_DEC_21150) {
+ struct pci_dev *dev2;
- if ((dev->bus->self &&
- dev->bus->self->vendor == PCI_VENDOR_ID_DEC) &&
- (dev->bus->self->device == PCI_DEVICE_ID_DEC_21150)) {
if (PCI_SLOT(dev->devfn) & 2)
return -ENODEV;
- while ((findev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, findev)) != NULL) {
- if ((findev->vendor == dev->vendor) &&
- (findev->device == dev->device) &&
- (PCI_SLOT(findev->devfn) & 2)) {
- if (findev->irq != dev->irq) {
- findev->irq = dev->irq;
- }
- ret = ide_setup_pci_devices(dev, findev, d);
- if (ret < 0)
- pci_dev_put(findev);
- return ret;
+ dev2 = pci_get_slot(dev->bus, PCI_DEVFN(PCI_SLOT(dev->devfn) + 2,
+ PCI_FUNC(dev->devfn)));
+ if (dev2 != NULL &&
+ dev2->vendor == dev->vendor &&
+ dev2->device == dev->device) {
+ int ret;
+
+ if (dev2->irq != dev->irq) {
+ dev2->irq = dev->irq;
+
+ printk(KERN_WARNING "%s: PCI config space "
+ "interrupt fixed.\n", d->name);
}
+
+ ret = ide_setup_pci_devices(dev, dev2, d);
+ if (ret < 0)
+ pci_dev_put(dev2);
+ return ret;
}
}
return ide_setup_pci_device(dev, d);
}
-static int __devinit init_setup_pdc20276(struct pci_dev *dev,
- ide_pci_device_t *d)
+static int __devinit init_setup_pdc20276(struct pci_dev *dev, ide_pci_device_t *d)
{
- if ((dev->bus->self) &&
- (dev->bus->self->vendor == PCI_VENDOR_ID_INTEL) &&
- ((dev->bus->self->device == PCI_DEVICE_ID_INTEL_I960) ||
- (dev->bus->self->device == PCI_DEVICE_ID_INTEL_I960RM))) {
- printk(KERN_INFO "ide: Skipping Promise PDC20276 "
- "attached to I2O RAID controller.\n");
+ struct pci_dev *bridge = dev->bus->self;
+
+ if (bridge != NULL &&
+ bridge->vendor == PCI_VENDOR_ID_INTEL &&
+ (bridge->device == PCI_DEVICE_ID_INTEL_I960 ||
+ bridge->device == PCI_DEVICE_ID_INTEL_I960RM)) {
+
+ printk(KERN_INFO "%s: attached to I2O RAID controller, "
+ "skipping.\n", d->name);
return -ENODEV;
}
return ide_setup_pci_device(dev, d);
diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pci/pdc202xx_old.c
index e19a891171cb..b578307fad51 100644
--- a/drivers/ide/pci/pdc202xx_old.c
+++ b/drivers/ide/pci/pdc202xx_old.c
@@ -63,12 +63,11 @@ static const char *pdc_quirk_drives[] = {
static void pdc_old_disable_66MHz_clock(ide_hwif_t *);
-static int pdc202xx_tune_chipset (ide_drive_t *drive, u8 xferspeed)
+static int pdc202xx_tune_chipset(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
u8 drive_pci = 0x60 + (drive->dn << 2);
- u8 speed = ide_rate_filter(drive, xferspeed);
u8 AP = 0, BP = 0, CP = 0;
u8 TA = 0, TB = 0, TC = 0;
@@ -143,9 +142,8 @@ static int pdc202xx_tune_chipset (ide_drive_t *drive, u8 xferspeed)
return ide_config_drive_speed(drive, speed);
}
-static void pdc202xx_tune_drive(ide_drive_t *drive, u8 pio)
+static void pdc202xx_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4);
pdc202xx_tune_chipset(drive, XFER_PIO_0 + pio);
}
@@ -191,7 +189,7 @@ static int pdc202xx_config_drive_xfer_rate (ide_drive_t *drive)
return 0;
if (ide_use_fast_pio(drive))
- pdc202xx_tune_drive(drive, 255);
+ ide_set_max_pio(drive);
return -1;
}
@@ -307,10 +305,11 @@ static void pdc202xx_reset (ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
ide_hwif_t *mate = hwif->mate;
-
+
pdc202xx_reset_host(hwif);
pdc202xx_reset_host(mate);
- pdc202xx_tune_drive(drive, 255);
+
+ ide_set_max_pio(drive);
}
static unsigned int __devinit init_chipset_pdc202xx(struct pci_dev *dev,
@@ -329,7 +328,9 @@ static void __devinit init_hwif_pdc202xx(ide_hwif_t *hwif)
hwif->rqsize = 256;
hwif->autodma = 0;
- hwif->tuneproc = &pdc202xx_tune_drive;
+
+ hwif->set_pio_mode = &pdc202xx_set_pio_mode;
+
hwif->quirkproc = &pdc202xx_quirkproc;
if (hwif->pci_dev->device != PCI_DEVICE_ID_PROMISE_20246)
diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c
index 5cfa9378bbb8..fd8214a7ab98 100644
--- a/drivers/ide/pci/piix.c
+++ b/drivers/ide/pci/piix.c
@@ -1,5 +1,5 @@
/*
- * linux/drivers/ide/pci/piix.c Version 0.51 Jul 6, 2007
+ * linux/drivers/ide/pci/piix.c Version 0.52 Jul 14, 2007
*
* Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer
* Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
@@ -17,11 +17,11 @@
* 41
* 43
*
- * | PIO 0 | c0 | 80 | 0 | piix_tune_drive(drive, 0);
- * | PIO 2 | SW2 | d0 | 90 | 4 | piix_tune_drive(drive, 2);
- * | PIO 3 | MW1 | e1 | a1 | 9 | piix_tune_drive(drive, 3);
- * | PIO 4 | MW2 | e3 | a3 | b | piix_tune_drive(drive, 4);
- *
+ * | PIO 0 | c0 | 80 | 0 |
+ * | PIO 2 | SW2 | d0 | 90 | 4 |
+ * | PIO 3 | MW1 | e1 | a1 | 9 |
+ * | PIO 4 | MW2 | e3 | a3 | b |
+ *
* sitre = word40 & 0x4000; primary
* sitre = word42 & 0x4000; secondary
*
@@ -204,16 +204,16 @@ static void piix_tune_pio (ide_drive_t *drive, u8 pio)
}
/**
- * piix_tune_drive - tune a drive attached to PIIX
+ * piix_set_pio_mode - set PIO mode
* @drive: drive to tune
* @pio: desired PIO mode
*
* Set the drive's PIO mode (might be useful if drive is not registered
* in CMOS for any reason).
*/
-static void piix_tune_drive (ide_drive_t *drive, u8 pio)
+
+static void piix_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4);
piix_tune_pio(drive, pio);
(void) ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
@@ -221,19 +221,18 @@ static void piix_tune_drive (ide_drive_t *drive, u8 pio)
/**
* piix_tune_chipset - tune a PIIX interface
* @drive: IDE drive to tune
- * @xferspeed: speed to configure
+ * @speed: speed to configure
*
* Set a PIIX interface channel to the desired speeds. This involves
* requires the right timing data into the PIIX configuration space
* then setting the drive parameters appropriately
*/
-
-static int piix_tune_chipset (ide_drive_t *drive, u8 xferspeed)
+
+static int piix_tune_chipset(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
u8 maslave = hwif->channel ? 0x42 : 0x40;
- u8 speed = ide_rate_filter(drive, xferspeed);
int a_speed = 3 << (drive->dn * 4);
int u_flag = 1 << drive->dn;
int v_flag = 0x01 << drive->dn;
@@ -260,11 +259,6 @@ static int piix_tune_chipset (ide_drive_t *drive, u8 xferspeed)
case XFER_MW_DMA_2:
case XFER_MW_DMA_1:
case XFER_SW_DMA_2: break;
- case XFER_PIO_4:
- case XFER_PIO_3:
- case XFER_PIO_2:
- case XFER_PIO_1:
- case XFER_PIO_0: break;
default: return -1;
}
@@ -294,10 +288,7 @@ static int piix_tune_chipset (ide_drive_t *drive, u8 xferspeed)
pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag);
}
- if (speed > XFER_PIO_4)
- piix_tune_pio(drive, piix_dma_2_pio(speed));
- else
- piix_tune_pio(drive, speed - XFER_PIO_0);
+ piix_tune_pio(drive, piix_dma_2_pio(speed));
return ide_config_drive_speed(drive, speed);
}
@@ -318,7 +309,7 @@ static int piix_config_drive_xfer_rate (ide_drive_t *drive)
return 0;
if (ide_use_fast_pio(drive))
- piix_tune_drive(drive, 255);
+ ide_set_max_pio(drive);
return -1;
}
@@ -455,7 +446,8 @@ static void __devinit init_hwif_piix(ide_hwif_t *hwif)
}
hwif->autodma = 0;
- hwif->tuneproc = &piix_tune_drive;
+
+ hwif->set_pio_mode = &piix_set_pio_mode;
hwif->speedproc = &piix_tune_chipset;
hwif->drives[0].autotune = 1;
hwif->drives[1].autotune = 1;
diff --git a/drivers/ide/pci/sc1200.c b/drivers/ide/pci/sc1200.c
index 9bdc9694d50d..79ecab689489 100644
--- a/drivers/ide/pci/sc1200.c
+++ b/drivers/ide/pci/sc1200.c
@@ -138,7 +138,7 @@ out:
return mask;
}
-static int sc1200_tune_chipset(ide_drive_t *drive, u8 mode)
+static int sc1200_tune_chipset(ide_drive_t *drive, const u8 mode)
{
ide_hwif_t *hwif = HWIF(drive);
int unit = drive->select.b.unit;
@@ -146,25 +146,11 @@ static int sc1200_tune_chipset(ide_drive_t *drive, u8 mode)
unsigned short pci_clock;
unsigned int basereg = hwif->channel ? 0x50 : 0x40;
- mode = ide_rate_filter(drive, mode);
-
/*
* Tell the drive to switch to the new mode; abort on failure.
*/
- if (sc1200_set_xfer_mode(drive, mode)) {
- printk("SC1200: set xfer mode failure\n");
+ if (sc1200_set_xfer_mode(drive, mode))
return 1; /* failure */
- }
-
- switch (mode) {
- case XFER_PIO_4:
- case XFER_PIO_3:
- case XFER_PIO_2:
- case XFER_PIO_1:
- case XFER_PIO_0:
- sc1200_tunepio(drive, mode - XFER_PIO_0);
- return 0;
- }
pci_clock = sc1200_get_pci_clock();
@@ -274,19 +260,20 @@ static int sc1200_ide_dma_end (ide_drive_t *drive)
}
/*
- * sc1200_tuneproc() handles selection/setting of PIO modes
+ * sc1200_set_pio_mode() handles setting of PIO modes
* for both the chipset and drive.
*
* All existing BIOSs for this chipset guarantee that all drives
* will have valid default PIO timings set up before we get here.
*/
-static void sc1200_tuneproc (ide_drive_t *drive, byte pio) /* mode=255 means "autotune" */
+
+static void sc1200_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
ide_hwif_t *hwif = HWIF(drive);
int mode = -1;
/*
- * bad abuse of ->tuneproc interface
+ * bad abuse of ->set_pio_mode interface
*/
switch (pio) {
case 200: mode = XFER_UDMA_0; break;
@@ -304,9 +291,6 @@ static void sc1200_tuneproc (ide_drive_t *drive, byte pio) /* mode=255 means "au
return;
}
- pio = ide_get_best_pio_mode(drive, pio, 4);
- printk("SC1200: %s: setting PIO mode%d\n", drive->name, pio);
-
if (sc1200_set_xfer_mode(drive, XFER_PIO_0 + pio) == 0)
sc1200_tunepio(drive, pio);
}
@@ -422,7 +406,8 @@ static void __devinit init_hwif_sc1200 (ide_hwif_t *hwif)
hwif->ide_dma_end = &sc1200_ide_dma_end;
if (!noautodma)
hwif->autodma = 1;
- hwif->tuneproc = &sc1200_tuneproc;
+
+ hwif->set_pio_mode = &sc1200_set_pio_mode;
hwif->speedproc = &sc1200_tune_chipset;
}
hwif->atapi_dma = 1;
@@ -438,6 +423,7 @@ static ide_pci_device_t sc1200_chipset __devinitdata = {
.init_hwif = init_hwif_sc1200,
.autodma = AUTODMA,
.bootable = ON_BOARD,
+ .host_flags = IDE_HFLAG_ABUSE_DMA_MODES,
.pio_mask = ATA_PIO4,
};
diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c
index eeb0a6d434aa..66a526e0ece4 100644
--- a/drivers/ide/pci/scc_pata.c
+++ b/drivers/ide/pci/scc_pata.c
@@ -221,9 +221,8 @@ static void scc_tune_pio(ide_drive_t *drive, const u8 pio)
out_be32((void __iomem *)pioct_port, reg);
}
-static void scc_tuneproc(ide_drive_t *drive, u8 pio)
+static void scc_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4);
scc_tune_pio(drive, pio);
ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
@@ -231,16 +230,15 @@ static void scc_tuneproc(ide_drive_t *drive, u8 pio)
/**
* scc_tune_chipset - tune a drive DMA mode
* @drive: Drive to set up
- * @xferspeed: speed we want to achieve
+ * @speed: speed we want to achieve
*
* Load the timing settings for this device mode into the
* controller.
*/
-static int scc_tune_chipset(ide_drive_t *drive, byte xferspeed)
+static int scc_tune_chipset(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
- u8 speed = ide_rate_filter(drive, xferspeed);
struct scc_ports *ports = ide_get_hwifdata(hwif);
unsigned long ctl_base = ports->ctl;
unsigned long cckctrl_port = ctl_base + 0xff0;
@@ -272,13 +270,6 @@ static int scc_tune_chipset(ide_drive_t *drive, byte xferspeed)
case XFER_UDMA_0:
idx = speed - XFER_UDMA_0;
break;
- case XFER_PIO_4:
- case XFER_PIO_3:
- case XFER_PIO_2:
- case XFER_PIO_1:
- case XFER_PIO_0:
- scc_tune_pio(drive, speed - XFER_PIO_0);
- return ide_config_drive_speed(drive, speed);
default:
return 1;
}
@@ -317,7 +308,7 @@ static int scc_config_drive_for_dma(ide_drive_t *drive)
return 0;
if (ide_use_fast_pio(drive))
- scc_tuneproc(drive, 255);
+ ide_set_max_pio(drive);
return -1;
}
@@ -718,7 +709,7 @@ static void __devinit init_hwif_scc(ide_hwif_t *hwif)
hwif->dma_setup = scc_dma_setup;
hwif->ide_dma_end = scc_ide_dma_end;
hwif->speedproc = scc_tune_chipset;
- hwif->tuneproc = scc_tuneproc;
+ hwif->set_pio_mode = scc_set_pio_mode;
hwif->ide_dma_check = scc_config_drive_for_dma;
hwif->ide_dma_test_irq = scc_dma_test_irq;
hwif->udma_filter = scc_udma_filter;
diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c
index 9fead2e7d4c8..0351cf210427 100644
--- a/drivers/ide/pci/serverworks.c
+++ b/drivers/ide/pci/serverworks.c
@@ -145,7 +145,7 @@ static void svwks_tune_pio(ide_drive_t *drive, const u8 pio)
}
}
-static int svwks_tune_chipset (ide_drive_t *drive, u8 xferspeed)
+static int svwks_tune_chipset(ide_drive_t *drive, const u8 speed)
{
static const u8 udma_modes[] = { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05 };
static const u8 dma_modes[] = { 0x77, 0x21, 0x20 };
@@ -153,16 +153,10 @@ static int svwks_tune_chipset (ide_drive_t *drive, u8 xferspeed)
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
- u8 speed = ide_rate_filter(drive, xferspeed);
u8 unit = (drive->select.b.unit & 0x01);
u8 ultra_enable = 0, ultra_timing = 0, dma_timing = 0;
- if (speed >= XFER_PIO_0 && speed <= XFER_PIO_4) {
- svwks_tune_pio(drive, speed - XFER_PIO_0);
- return ide_config_drive_speed(drive, speed);
- }
-
/* If we are about to put a disk into UDMA mode we screwed up.
Our code assumes we never _ever_ do this on an OSB4 */
@@ -203,9 +197,8 @@ static int svwks_tune_chipset (ide_drive_t *drive, u8 xferspeed)
return (ide_config_drive_speed(drive, speed));
}
-static void svwks_tune_drive (ide_drive_t *drive, u8 pio)
+static void svwks_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4);
svwks_tune_pio(drive, pio);
(void)ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
@@ -218,7 +211,7 @@ static int svwks_config_drive_xfer_rate (ide_drive_t *drive)
return 0;
if (ide_use_fast_pio(drive))
- svwks_tune_drive(drive, 255);
+ ide_set_max_pio(drive);
return -1;
}
@@ -390,7 +383,7 @@ static void __devinit init_hwif_svwks (ide_hwif_t *hwif)
if (!hwif->irq)
hwif->irq = hwif->channel ? 15 : 14;
- hwif->tuneproc = &svwks_tune_drive;
+ hwif->set_pio_mode = &svwks_set_pio_mode;
hwif->speedproc = &svwks_tune_chipset;
hwif->udma_filter = &svwks_udma_filter;
diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c
index 57145767c3df..c292e1de1d56 100644
--- a/drivers/ide/pci/sgiioc4.c
+++ b/drivers/ide/pci/sgiioc4.c
@@ -34,6 +34,8 @@
#include <linux/ide.h>
+#define DRV_NAME "SGIIOC4"
+
/* IOC4 Specific Definitions */
#define IOC4_CMD_OFFSET 0x100
#define IOC4_CTRL_OFFSET 0x120
@@ -289,15 +291,26 @@ static void sgiioc4_dma_off_quietly(ide_drive_t *drive)
drive->hwif->dma_host_off(drive);
}
+static int sgiioc4_speedproc(ide_drive_t *drive, const u8 speed)
+{
+ if (speed != XFER_MW_DMA_2)
+ return 1;
+
+ return ide_config_drive_speed(drive, speed);
+}
+
static int sgiioc4_ide_dma_check(ide_drive_t *drive)
{
- /* FIXME: check for available DMA modes */
- if (ide_config_drive_speed(drive, XFER_MW_DMA_2) != 0) {
- printk(KERN_WARNING "%s: couldn't set MWDMA2 mode, "
- "using PIO instead\n", drive->name);
- return -1;
- } else
+ if (ide_tune_dma(drive))
return 0;
+
+ /*
+ * ->set_pio_mode is not implemented currently
+ * so this is just for the completness
+ */
+ ide_set_max_pio(drive);
+
+ return -1;
}
/* returns 1 if dma irq issued, 0 otherwise */
@@ -353,7 +366,7 @@ sgiioc4_INB(unsigned long port)
}
/* Creates a dma map for the scatter-gather list entries */
-static void __devinit
+static int __devinit
ide_dma_sgiioc4(ide_hwif_t * hwif, unsigned long dma_base)
{
void __iomem *virt_dma_base;
@@ -369,7 +382,7 @@ ide_dma_sgiioc4(ide_hwif_t * hwif, unsigned long dma_base)
"ALREADY in use\n",
__FUNCTION__, hwif->name, (void *) dma_base,
(void *) dma_base + num_ports - 1);
- goto dma_alloc_failure;
+ return -1;
}
virt_dma_base = ioremap(dma_base, num_ports);
@@ -395,7 +408,7 @@ ide_dma_sgiioc4(ide_hwif_t * hwif, unsigned long dma_base)
if (pad) {
ide_set_hwifdata(hwif, pad);
- return;
+ return 0;
}
pci_free_consistent(hwif->pci_dev,
@@ -413,10 +426,7 @@ dma_pci_alloc_failure:
dma_remap_failure:
release_mem_region(dma_base, num_ports);
-dma_alloc_failure:
- /* Disable DMA because we couldnot allocate any DMA maps */
- hwif->autodma = 0;
- hwif->atapi_dma = 0;
+ return -1;
}
/* Initializes the IOC4 DMA Engine */
@@ -581,14 +591,11 @@ static void __devinit
ide_init_sgiioc4(ide_hwif_t * hwif)
{
hwif->mmio = 1;
- hwif->autodma = 1;
hwif->atapi_dma = 1;
- hwif->ultra_mask = 0x0; /* Disable Ultra DMA */
- hwif->mwdma_mask = 0x2; /* Multimode-2 DMA */
- hwif->swdma_mask = 0x2;
+ hwif->mwdma_mask = 0x04;
hwif->pio_mask = 0x00;
- hwif->tuneproc = NULL; /* Sets timing for PIO mode */
- hwif->speedproc = NULL; /* Sets timing for DMA &/or PIO modes */
+ hwif->set_pio_mode = NULL; /* Sets timing for PIO mode */
+ hwif->speedproc = &sgiioc4_speedproc;
hwif->selectproc = NULL;/* Use the default routine to select drive */
hwif->reset_poll = NULL;/* No HBA specific reset_poll needed */
hwif->pre_reset = NULL; /* No HBA specific pre_set needed */
@@ -615,7 +622,7 @@ ide_init_sgiioc4(ide_hwif_t * hwif)
}
static int __devinit
-sgiioc4_ide_setup_pci_device(struct pci_dev *dev, ide_pci_device_t * d)
+sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
{
unsigned long cmd_base, dma_base, irqport;
unsigned long bar0, cmd_phys_base, ctl;
@@ -632,7 +639,8 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev, ide_pci_device_t * d)
break;
}
if (h == MAX_HWIFS) {
- printk(KERN_ERR "%s: too many IDE interfaces, no room in table\n", d->name);
+ printk(KERN_ERR "%s: too many IDE interfaces, no room in table\n",
+ DRV_NAME);
return -ENOMEM;
}
@@ -641,7 +649,7 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev, ide_pci_device_t * d)
virt_base = ioremap(bar0, pci_resource_len(dev, 0));
if (virt_base == NULL) {
printk(KERN_ERR "%s: Unable to remap BAR 0 address: 0x%lx\n",
- d->name, bar0);
+ DRV_NAME, bar0);
return -ENOMEM;
}
cmd_base = (unsigned long) virt_base + IOC4_CMD_OFFSET;
@@ -672,7 +680,6 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev, ide_pci_device_t * d)
hwif->chipset = ide_pci;
hwif->pci_dev = dev;
hwif->channel = 0; /* Single Channel chip */
- hwif->cds = (struct ide_pci_device_s *) d;
hwif->gendev.parent = &dev->dev;/* setup proper ancestral information */
/* The IOC4 uses MMIO rather than Port IO. */
@@ -683,11 +690,14 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev, ide_pci_device_t * d)
ide_init_sgiioc4(hwif);
- if (dma_base)
- ide_dma_sgiioc4(hwif, dma_base);
- else
+ hwif->autodma = 0;
+
+ if (dma_base && ide_dma_sgiioc4(hwif, dma_base) == 0) {
+ hwif->autodma = 1;
+ hwif->drives[1].autodma = hwif->drives[0].autodma = 1;
+ } else
printk(KERN_INFO "%s: %s Bus-Master DMA disabled\n",
- hwif->name, d->name);
+ hwif->name, DRV_NAME);
if (probe_hwif_init(hwif))
return -EIO;
@@ -699,7 +709,7 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev, ide_pci_device_t * d)
}
static unsigned int __devinit
-pci_init_sgiioc4(struct pci_dev *dev, ide_pci_device_t * d)
+pci_init_sgiioc4(struct pci_dev *dev)
{
unsigned int class_rev;
int ret;
@@ -707,30 +717,20 @@ pci_init_sgiioc4(struct pci_dev *dev, ide_pci_device_t * d)
pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
class_rev &= 0xff;
printk(KERN_INFO "%s: IDE controller at PCI slot %s, revision %d\n",
- d->name, pci_name(dev), class_rev);
+ DRV_NAME, pci_name(dev), class_rev);
if (class_rev < IOC4_SUPPORTED_FIRMWARE_REV) {
printk(KERN_ERR "Skipping %s IDE controller in slot %s: "
- "firmware is obsolete - please upgrade to revision"
- "46 or higher\n", d->name, pci_name(dev));
+ "firmware is obsolete - please upgrade to "
+ "revision46 or higher\n",
+ DRV_NAME, pci_name(dev));
ret = -EAGAIN;
goto out;
}
- ret = sgiioc4_ide_setup_pci_device(dev, d);
+ ret = sgiioc4_ide_setup_pci_device(dev);
out:
return ret;
}
-static ide_pci_device_t sgiioc4_chipset __devinitdata = {
- /* Channel 0 */
- .name = "SGIIOC4",
- .init_hwif = ide_init_sgiioc4,
- .init_dma = ide_dma_sgiioc4,
- .autodma = AUTODMA,
- /* SGI IOC4 doesn't have enablebits. */
- .bootable = ON_BOARD,
- .host_flags = IDE_HFLAG_SINGLE,
-};
-
int
ioc4_ide_attach_one(struct ioc4_driver_data *idd)
{
@@ -740,7 +740,7 @@ ioc4_ide_attach_one(struct ioc4_driver_data *idd)
if (idd->idd_variant == IOC4_VARIANT_PCI_RT)
return 0;
- return pci_init_sgiioc4(idd->idd_pdev, &sgiioc4_chipset);
+ return pci_init_sgiioc4(idd->idd_pdev);
}
static struct ioc4_submodule ioc4_ide_submodule = {
diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c
index 50f6d172ef77..5d1e5e52a044 100644
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -1,5 +1,5 @@
/*
- * linux/drivers/ide/pci/siimage.c Version 1.15 Jun 29 2007
+ * linux/drivers/ide/pci/siimage.c Version 1.16 Jul 13 2007
*
* Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 2003 Red Hat <alan@redhat.com>
@@ -185,7 +185,12 @@ static void sil_tune_pio(ide_drive_t *drive, u8 pio)
u16 speedp = 0;
unsigned long addr = siimage_seldev(drive, 0x04);
unsigned long tfaddr = siimage_selreg(hwif, 0x02);
+ unsigned long base = (unsigned long)hwif->hwif_data;
u8 tf_pio = pio;
+ u8 addr_mask = hwif->channel ? (hwif->mmio ? 0xF4 : 0x84)
+ : (hwif->mmio ? 0xB4 : 0x80);
+ u8 mode = 0;
+ u8 unit = drive->select.b.unit;
/* trim *taskfile* PIO to the slowest of the master/slave */
if (pair->present) {
@@ -207,6 +212,11 @@ static void sil_tune_pio(ide_drive_t *drive, u8 pio)
hwif->OUTW(hwif->INW(tfaddr-2)|0x200, tfaddr-2);
else
hwif->OUTW(hwif->INW(tfaddr-2)&~0x200, tfaddr-2);
+
+ mode = hwif->INB(base + addr_mask);
+ mode &= ~(unit ? 0x30 : 0x03);
+ mode |= (unit ? 0x10 : 0x01);
+ hwif->OUTB(mode, base + addr_mask);
} else {
pci_write_config_word(hwif->pci_dev, addr, speedp);
pci_write_config_word(hwif->pci_dev, tfaddr, speedt);
@@ -216,12 +226,16 @@ static void sil_tune_pio(ide_drive_t *drive, u8 pio)
if (pio > 2)
speedp |= 0x200;
pci_write_config_word(hwif->pci_dev, tfaddr-2, speedp);
+
+ pci_read_config_byte(hwif->pci_dev, addr_mask, &mode);
+ mode &= ~(unit ? 0x30 : 0x03);
+ mode |= (unit ? 0x10 : 0x01);
+ pci_write_config_byte(hwif->pci_dev, addr_mask, mode);
}
}
-static void sil_tuneproc(ide_drive_t *drive, u8 pio)
+static void sil_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4);
sil_tune_pio(drive, pio);
(void)ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
@@ -229,14 +243,12 @@ static void sil_tuneproc(ide_drive_t *drive, u8 pio)
/**
* siimage_tune_chipset - set controller timings
* @drive: Drive to set up
- * @xferspeed: speed we want to achieve
+ * @speed: speed we want to achieve
*
- * Tune the SII chipset for the desired mode. If we can't achieve
- * the desired mode then tune for a lower one, but ultimately
- * make the thing work.
+ * Tune the SII chipset for the desired mode.
*/
-
-static int siimage_tune_chipset (ide_drive_t *drive, byte xferspeed)
+
+static int siimage_tune_chipset(ide_drive_t *drive, const u8 speed)
{
u8 ultra6[] = { 0x0F, 0x0B, 0x07, 0x05, 0x03, 0x02, 0x01 };
u8 ultra5[] = { 0x0C, 0x07, 0x05, 0x04, 0x02, 0x01 };
@@ -245,7 +257,6 @@ static int siimage_tune_chipset (ide_drive_t *drive, byte xferspeed)
ide_hwif_t *hwif = HWIF(drive);
u16 ultra = 0, multi = 0;
u8 mode = 0, unit = drive->select.b.unit;
- u8 speed = ide_rate_filter(drive, xferspeed);
unsigned long base = (unsigned long)hwif->hwif_data;
u8 scsc = 0, addr_mask = ((hwif->channel) ?
((hwif->mmio) ? 0xF4 : 0x84) :
@@ -273,14 +284,6 @@ static int siimage_tune_chipset (ide_drive_t *drive, byte xferspeed)
scsc = is_sata(hwif) ? 1 : scsc;
switch(speed) {
- case XFER_PIO_4:
- case XFER_PIO_3:
- case XFER_PIO_2:
- case XFER_PIO_1:
- case XFER_PIO_0:
- sil_tune_pio(drive, speed - XFER_PIO_0);
- mode |= ((unit) ? 0x10 : 0x01);
- break;
case XFER_MW_DMA_2:
case XFER_MW_DMA_1:
case XFER_MW_DMA_0:
@@ -331,7 +334,7 @@ static int siimage_config_drive_for_dma (ide_drive_t *drive)
return 0;
if (ide_use_fast_pio(drive))
- sil_tuneproc(drive, 255);
+ ide_set_max_pio(drive);
return -1;
}
@@ -902,7 +905,7 @@ static void __devinit init_hwif_siimage(ide_hwif_t *hwif)
hwif->resetproc = &siimage_reset;
hwif->speedproc = &siimage_tune_chipset;
- hwif->tuneproc = &sil_tuneproc;
+ hwif->set_pio_mode = &sil_set_pio_mode;
hwif->reset_poll = &siimage_reset_poll;
hwif->pre_reset = &siimage_pre_reset;
hwif->udma_filter = &sil_udma_filter;
diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c
index 26f24802d3e8..3e18899de631 100644
--- a/drivers/ide/pci/sis5513.c
+++ b/drivers/ide/pci/sis5513.c
@@ -1,5 +1,5 @@
/*
- * linux/drivers/ide/pci/sis5513.c Version 0.25 Jun 10, 2007
+ * linux/drivers/ide/pci/sis5513.c Version 0.27 Jul 14, 2007
*
* Copyright (C) 1999-2000 Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 2002 Lionel Bouton <Lionel.Bouton@inet6.fr>, Maintainer
@@ -519,27 +519,18 @@ static void config_art_rwp_pio (ide_drive_t *drive, u8 pio)
}
}
-static int sis5513_tune_drive(ide_drive_t *drive, u8 pio)
+static void sis_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4);
config_art_rwp_pio(drive, pio);
- return ide_config_drive_speed(drive, XFER_PIO_0 + pio);
+ (void)ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
-static void sis5513_tuneproc(ide_drive_t *drive, u8 pio)
-{
- (void)sis5513_tune_drive(drive, pio);
-}
-
-static int sis5513_tune_chipset (ide_drive_t *drive, u8 xferspeed)
+static int sis5513_tune_chipset(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
-
- u8 drive_pci, reg, speed;
u32 regdw;
-
- speed = ide_rate_filter(drive, xferspeed);
+ u8 drive_pci, reg;
/* See config_art_rwp_pio for drive pci config registers */
drive_pci = 0x40;
@@ -582,9 +573,6 @@ static int sis5513_tune_chipset (ide_drive_t *drive, u8 xferspeed)
regdw |= (unsigned long)cycle_time_value[ATA_133][speed-XFER_UDMA_0] << 4;
regdw |= (unsigned long)cvs_time_value[ATA_133][speed-XFER_UDMA_0] << 8;
} else {
- /* if ATA133 disable, we should not set speed above UDMA5 */
- if (speed > XFER_UDMA_5)
- speed = XFER_UDMA_5;
regdw |= (unsigned long)cycle_time_value[ATA_100][speed-XFER_UDMA_0] << 4;
regdw |= (unsigned long)cvs_time_value[ATA_100][speed-XFER_UDMA_0] << 8;
}
@@ -608,12 +596,6 @@ static int sis5513_tune_chipset (ide_drive_t *drive, u8 xferspeed)
case XFER_SW_DMA_1:
case XFER_SW_DMA_0:
break;
- case XFER_PIO_4:
- case XFER_PIO_3:
- case XFER_PIO_2:
- case XFER_PIO_1:
- case XFER_PIO_0:
- return sis5513_tune_drive(drive, speed - XFER_PIO_0);
default:
BUG();
break;
@@ -627,7 +609,7 @@ static int sis5513_config_xfer_rate(ide_drive_t *drive)
/*
* TODO: always set PIO mode and remove this
*/
- sis5513_tuneproc(drive, 255);
+ ide_set_max_pio(drive);
drive->init_speed = 0;
@@ -635,11 +617,25 @@ static int sis5513_config_xfer_rate(ide_drive_t *drive)
return 0;
if (ide_use_fast_pio(drive))
- sis5513_tuneproc(drive, 255);
+ ide_set_max_pio(drive);
return -1;
}
+static u8 sis5513_ata133_udma_filter(ide_drive_t *drive)
+{
+ struct pci_dev *dev = drive->hwif->pci_dev;
+ int drive_pci;
+ u32 reg54 = 0, regdw = 0;
+
+ pci_read_config_dword(dev, 0x54, &reg54);
+ drive_pci = ((reg54 & 0x40000000) ? 0x70 : 0x40) + drive->dn * 4;
+ pci_read_config_dword(dev, drive_pci, &regdw);
+
+ /* if ATA133 disable, we should not set speed above UDMA5 */
+ return (regdw & 0x08) ? ATA_UDMA6 : ATA_UDMA5;
+}
+
/* Chip detection and general config */
static unsigned int __devinit init_chipset_sis5513 (struct pci_dev *dev, const char *name)
{
@@ -844,9 +840,12 @@ static void __devinit init_hwif_sis5513 (ide_hwif_t *hwif)
if (!hwif->irq)
hwif->irq = hwif->channel ? 15 : 14;
- hwif->tuneproc = &sis5513_tuneproc;
+ hwif->set_pio_mode = &sis_set_pio_mode;
hwif->speedproc = &sis5513_tune_chipset;
+ if (chipset_family >= ATA_133)
+ hwif->udma_filter = sis5513_ata133_udma_filter;
+
if (!(hwif->dma_base)) {
hwif->drives[0].autotune = 1;
hwif->drives[1].autotune = 1;
diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c
index 0947cab00595..f492318ba797 100644
--- a/drivers/ide/pci/sl82c105.c
+++ b/drivers/ide/pci/sl82c105.c
@@ -75,16 +75,12 @@ static unsigned int get_pio_timings(ide_drive_t *drive, u8 pio)
/*
* Configure the chipset for PIO mode.
*/
-static u8 sl82c105_tune_pio(ide_drive_t *drive, u8 pio)
+static void sl82c105_tune_pio(ide_drive_t *drive, const u8 pio)
{
struct pci_dev *dev = HWIF(drive)->pci_dev;
int reg = 0x44 + drive->dn * 4;
u16 drv_ctrl;
- DBG(("sl82c105_tune_pio(drive:%s, pio:%u)\n", drive->name, pio));
-
- pio = ide_get_best_pio_mode(drive, pio, 5);
-
drv_ctrl = get_pio_timings(drive, pio);
/*
@@ -106,14 +102,12 @@ static u8 sl82c105_tune_pio(ide_drive_t *drive, u8 pio)
printk(KERN_DEBUG "%s: selected %s (%dns) (%04X)\n", drive->name,
ide_xfer_verbose(pio + XFER_PIO_0),
ide_pio_cycle_time(drive, pio), drv_ctrl);
-
- return pio;
}
/*
* Configure the drive and chipset for a new transfer speed.
*/
-static int sl82c105_tune_chipset(ide_drive_t *drive, u8 speed)
+static int sl82c105_tune_chipset(ide_drive_t *drive, const u8 speed)
{
static u16 mwdma_timings[] = {0x0707, 0x0201, 0x0200};
u16 drv_ctrl;
@@ -121,8 +115,6 @@ static int sl82c105_tune_chipset(ide_drive_t *drive, u8 speed)
DBG(("sl82c105_tune_chipset(drive:%s, speed:%s)\n",
drive->name, ide_xfer_verbose(speed)));
- speed = ide_rate_filter(drive, speed);
-
switch (speed) {
case XFER_MW_DMA_2:
case XFER_MW_DMA_1:
@@ -147,14 +139,6 @@ static int sl82c105_tune_chipset(ide_drive_t *drive, u8 speed)
pci_write_config_word(dev, reg, drv_ctrl);
}
break;
- case XFER_PIO_5:
- case XFER_PIO_4:
- case XFER_PIO_3:
- case XFER_PIO_2:
- case XFER_PIO_1:
- case XFER_PIO_0:
- (void) sl82c105_tune_pio(drive, speed - XFER_PIO_0);
- break;
default:
return -1;
}
@@ -327,11 +311,10 @@ static void sl82c105_resetproc(ide_drive_t *drive)
* We only deal with PIO mode here - DMA mode 'using_dma' is not
* initialised at the point that this function is called.
*/
-static void sl82c105_tune_drive(ide_drive_t *drive, u8 pio)
+static void sl82c105_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- DBG(("sl82c105_tune_drive(drive:%s, pio:%u)\n", drive->name, pio));
+ sl82c105_tune_pio(drive, pio);
- pio = sl82c105_tune_pio(drive, pio);
(void) ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
@@ -399,7 +382,7 @@ static void __devinit init_hwif_sl82c105(ide_hwif_t *hwif)
DBG(("init_hwif_sl82c105(hwif: ide%d)\n", hwif->index));
- hwif->tuneproc = &sl82c105_tune_drive;
+ hwif->set_pio_mode = &sl82c105_set_pio_mode;
hwif->speedproc = &sl82c105_tune_chipset;
hwif->selectproc = &sl82c105_selectproc;
hwif->resetproc = &sl82c105_resetproc;
diff --git a/drivers/ide/pci/slc90e66.c b/drivers/ide/pci/slc90e66.c
index 628b0664f576..ae8e91324577 100644
--- a/drivers/ide/pci/slc90e66.c
+++ b/drivers/ide/pci/slc90e66.c
@@ -1,5 +1,5 @@
/*
- * linux/drivers/ide/pci/slc90e66.c Version 0.15 Jul 6, 2007
+ * linux/drivers/ide/pci/slc90e66.c Version 0.16 Jul 14, 2007
*
* Copyright (C) 2000-2002 Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 2006-2007 MontaVista Software, Inc. <source@mvista.com>
@@ -95,19 +95,17 @@ static void slc90e66_tune_pio (ide_drive_t *drive, u8 pio)
spin_unlock_irqrestore(&ide_lock, flags);
}
-static void slc90e66_tune_drive (ide_drive_t *drive, u8 pio)
+static void slc90e66_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4);
slc90e66_tune_pio(drive, pio);
(void) ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
-static int slc90e66_tune_chipset (ide_drive_t *drive, u8 xferspeed)
+static int slc90e66_tune_chipset(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
u8 maslave = hwif->channel ? 0x42 : 0x40;
- u8 speed = ide_rate_filter(drive, xferspeed);
int sitre = 0, a_speed = 7 << (drive->dn * 4);
int u_speed = 0, u_flag = 1 << drive->dn;
u16 reg4042, reg44, reg48, reg4a;
@@ -127,11 +125,6 @@ static int slc90e66_tune_chipset (ide_drive_t *drive, u8 xferspeed)
case XFER_MW_DMA_2:
case XFER_MW_DMA_1:
case XFER_SW_DMA_2: break;
- case XFER_PIO_4:
- case XFER_PIO_3:
- case XFER_PIO_2:
- case XFER_PIO_1:
- case XFER_PIO_0: break;
default: return -1;
}
@@ -151,10 +144,7 @@ static int slc90e66_tune_chipset (ide_drive_t *drive, u8 xferspeed)
pci_write_config_word(dev, 0x4a, reg4a & ~a_speed);
}
- if (speed > XFER_PIO_4)
- slc90e66_tune_pio(drive, slc90e66_dma_2_pio(speed));
- else
- slc90e66_tune_pio(drive, speed - XFER_PIO_0);
+ slc90e66_tune_pio(drive, slc90e66_dma_2_pio(speed));
return ide_config_drive_speed(drive, speed);
}
@@ -167,7 +157,7 @@ static int slc90e66_config_drive_xfer_rate (ide_drive_t *drive)
return 0;
if (ide_use_fast_pio(drive))
- slc90e66_tune_drive(drive, 255);
+ ide_set_max_pio(drive);
return -1;
}
@@ -183,7 +173,7 @@ static void __devinit init_hwif_slc90e66 (ide_hwif_t *hwif)
hwif->irq = hwif->channel ? 15 : 14;
hwif->speedproc = &slc90e66_tune_chipset;
- hwif->tuneproc = &slc90e66_tune_drive;
+ hwif->set_pio_mode = &slc90e66_set_pio_mode;
pci_read_config_byte(hwif->pci_dev, 0x47, &reg47);
diff --git a/drivers/ide/pci/tc86c001.c b/drivers/ide/pci/tc86c001.c
index ec79bacc30c2..e23b9cfb6eb4 100644
--- a/drivers/ide/pci/tc86c001.c
+++ b/drivers/ide/pci/tc86c001.c
@@ -13,14 +13,12 @@
#include <linux/pci.h>
#include <linux/ide.h>
-static int tc86c001_tune_chipset(ide_drive_t *drive, u8 speed)
+static int tc86c001_tune_chipset(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
unsigned long scr_port = hwif->config_data + (drive->dn ? 0x02 : 0x00);
u16 mode, scr = hwif->INW(scr_port);
- speed = ide_rate_filter(drive, speed);
-
switch (speed) {
case XFER_UDMA_4: mode = 0x00c0; break;
case XFER_UDMA_3: mode = 0x00b0; break;
@@ -45,9 +43,8 @@ static int tc86c001_tune_chipset(ide_drive_t *drive, u8 speed)
return ide_config_drive_speed(drive, speed);
}
-static void tc86c001_tune_drive(ide_drive_t *drive, u8 pio)
+static void tc86c001_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4);
(void) tc86c001_tune_chipset(drive, XFER_PIO_0 + pio);
}
@@ -173,7 +170,7 @@ static int tc86c001_config_drive_xfer_rate(ide_drive_t *drive)
return 0;
if (ide_use_fast_pio(drive))
- tc86c001_tune_drive(drive, 255);
+ ide_set_max_pio(drive);
return -1;
}
@@ -195,7 +192,7 @@ static void __devinit init_hwif_tc86c001(ide_hwif_t *hwif)
/* Store the system control register base for convenience... */
hwif->config_data = sc_base;
- hwif->tuneproc = &tc86c001_tune_drive;
+ hwif->set_pio_mode = &tc86c001_set_pio_mode;
hwif->speedproc = &tc86c001_tune_chipset;
hwif->busproc = &tc86c001_busproc;
diff --git a/drivers/ide/pci/triflex.c b/drivers/ide/pci/triflex.c
index 098692a6d615..c3ff066eea5a 100644
--- a/drivers/ide/pci/triflex.c
+++ b/drivers/ide/pci/triflex.c
@@ -40,7 +40,7 @@
#include <linux/ide.h>
#include <linux/init.h>
-static int triflex_tune_chipset(ide_drive_t *drive, u8 xferspeed)
+static int triflex_tune_chipset(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
@@ -48,7 +48,6 @@ static int triflex_tune_chipset(ide_drive_t *drive, u8 xferspeed)
u16 timing = 0;
u32 triflex_timings = 0;
u8 unit = (drive->select.b.unit & 0x01);
- u8 speed = ide_rate_filter(drive, xferspeed);
pci_read_config_dword(dev, channel_offset, &triflex_timings);
@@ -94,10 +93,9 @@ static int triflex_tune_chipset(ide_drive_t *drive, u8 xferspeed)
return (ide_config_drive_speed(drive, speed));
}
-static void triflex_tune_drive(ide_drive_t *drive, u8 pio)
+static void triflex_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- int use_pio = ide_get_best_pio_mode(drive, pio, 4);
- (void) triflex_tune_chipset(drive, (XFER_PIO_0 + use_pio));
+ (void)triflex_tune_chipset(drive, XFER_PIO_0 + pio);
}
static int triflex_config_drive_xfer_rate(ide_drive_t *drive)
@@ -105,14 +103,14 @@ static int triflex_config_drive_xfer_rate(ide_drive_t *drive)
if (ide_tune_dma(drive))
return 0;
- triflex_tune_drive(drive, 255);
+ ide_set_max_pio(drive);
return -1;
}
static void __devinit init_hwif_triflex(ide_hwif_t *hwif)
{
- hwif->tuneproc = &triflex_tune_drive;
+ hwif->set_pio_mode = &triflex_set_pio_mode;
hwif->speedproc = &triflex_tune_chipset;
if (hwif->dma_base == 0)
diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c
index c10203a32159..378feb491ec4 100644
--- a/drivers/ide/pci/via82cxxx.c
+++ b/drivers/ide/pci/via82cxxx.c
@@ -1,6 +1,6 @@
/*
*
- * Version 3.47
+ * Version 3.48
*
* VIA IDE driver for Linux. Supported southbridges:
*
@@ -158,7 +158,7 @@ static void via_set_speed(ide_hwif_t *hwif, u8 dn, struct ide_timing *timing)
* by upper layers.
*/
-static int via_set_drive(ide_drive_t *drive, u8 speed)
+static int via_set_drive(ide_drive_t *drive, const u8 speed)
{
ide_drive_t *peer = HWIF(drive)->drives + (~drive->dn & 1);
struct via82cxxx_dev *vdev = pci_get_drvdata(drive->hwif->pci_dev);
@@ -195,19 +195,16 @@ static int via_set_drive(ide_drive_t *drive, u8 speed)
}
/**
- * via82cxxx_tune_drive - PIO setup
- * @drive: drive to set up
- * @pio: mode to use (255 for 'best possible')
+ * via_set_pio_mode - PIO setup
+ * @drive: drive
+ * @pio: PIO mode number
*
* A callback from the upper layers for PIO-only tuning.
*/
-static void via82cxxx_tune_drive(ide_drive_t *drive, u8 pio)
+static void via_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- if (pio == 255)
- pio = ide_get_best_pio_mode(drive, 255, 5);
-
- via_set_drive(drive, XFER_PIO_0 + min_t(u8, pio, 5));
+ via_set_drive(drive, XFER_PIO_0 + pio);
}
/**
@@ -220,18 +217,11 @@ static void via82cxxx_tune_drive(ide_drive_t *drive, u8 pio)
static int via82cxxx_ide_dma_check (ide_drive_t *drive)
{
- u8 speed = ide_max_dma_mode(drive);
-
- if (speed == 0) {
- via82cxxx_tune_drive(drive, 255);
- return -1;
- }
-
- via_set_drive(drive, speed);
-
- if (drive->autodma)
+ if (ide_tune_dma(drive))
return 0;
+ ide_set_max_pio(drive);
+
return -1;
}
@@ -465,7 +455,7 @@ static void __devinit init_hwif_via82cxxx(ide_hwif_t *hwif)
hwif->autodma = 0;
- hwif->tuneproc = &via82cxxx_tune_drive;
+ hwif->set_pio_mode = &via_set_pio_mode;
hwif->speedproc = &via_set_drive;
diff --git a/drivers/ide/ppc/mpc8xx.c b/drivers/ide/ppc/mpc8xx.c
index dab79afa9b22..df2e92034f5d 100644
--- a/drivers/ide/ppc/mpc8xx.c
+++ b/drivers/ide/ppc/mpc8xx.c
@@ -45,7 +45,7 @@ static void print_funcid (int func);
static int check_ide_device (unsigned long base);
static void ide_interrupt_ack (void *dev);
-static void m8xx_ide_tuneproc(ide_drive_t *drive, u8 pio);
+static void m8xx_ide_set_pio_mode(ide_drive_t *drive, const u8 pio);
typedef struct ide_ioport_desc {
unsigned long base_off; /* Offset to PCMCIA memory */
@@ -314,9 +314,8 @@ m8xx_ide_init_hwif_ports(hw_regs_t *hw, unsigned long data_port,
#endif /* CONFIG_IDE_8xx_PCCARD */
}
- /* register routine to tune PIO mode */
ide_hwifs[data_port].pio_mask = ATA_PIO4;
- ide_hwifs[data_port].tuneproc = m8xx_ide_tuneproc;
+ ide_hwifs[data_port].set_pio_mode = m8xx_ide_set_pio_mode;
hw->ack_intr = (ide_ack_intr_t *) ide_interrupt_ack;
/* Enable Harddisk Interrupt,
@@ -401,9 +400,8 @@ void m8xx_ide_init_hwif_ports (hw_regs_t *hw,
*irq = ioport_dsc[data_port].irq;
}
- /* register routine to tune PIO mode */
ide_hwifs[data_port].pio_mask = ATA_PIO4;
- ide_hwifs[data_port].tuneproc = m8xx_ide_tuneproc;
+ ide_hwifs[data_port].set_pio_mode = m8xx_ide_set_pio_mode;
hw->ack_intr = (ide_ack_intr_t *) ide_interrupt_ack;
/* Enable Harddisk Interrupt,
@@ -427,24 +425,13 @@ void m8xx_ide_init_hwif_ports (hw_regs_t *hw,
#define PCMCIA_SL(t) ((t==32) ? 0 : ((t & 0x1F)<<7)) /* Strobe Length */
#endif
-
/* Calculate PIO timings */
-static void
-m8xx_ide_tuneproc(ide_drive_t *drive, u8 pio)
+static void m8xx_ide_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
#if defined(CONFIG_IDE_8xx_PCCARD) || defined(CONFIG_IDE_8xx_DIRECT)
volatile pcmconf8xx_t *pcmp;
ulong timing, mask, reg;
-#endif
-
- pio = ide_get_best_pio_mode(drive, pio, 4);
-#if 1
- printk("%s[%d] %s: best PIO mode: %d\n",
- __FILE__,__LINE__,__FUNCTION__, pio);
-#endif
-
-#if defined(CONFIG_IDE_8xx_PCCARD) || defined(CONFIG_IDE_8xx_DIRECT)
pcmp = (pcmconf8xx_t *)(&(((immap_t *)IMAP_ADDR)->im_pcmcia));
mask = ~(PCMCIA_SHT(0xFF) | PCMCIA_SST(0xFF) | PCMCIA_SL(0xFF));
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index 2fb047b898aa..f759a5397865 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -6,6 +6,7 @@
* for doing DMA.
*
* Copyright (C) 1998-2003 Paul Mackerras & Ben. Herrenschmidt
+ * Copyright (C) 2007 Bartlomiej Zolnierkiewicz
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -311,7 +312,8 @@ static struct kauai_timing kauai_pio_timings[] =
{ 240 , 0x0800038b },
{ 239 , 0x0800030c },
{ 180 , 0x05000249 },
- { 120 , 0x04000148 }
+ { 120 , 0x04000148 },
+ { 0 , 0 },
};
static struct kauai_timing kauai_mdma_timings[] =
@@ -351,7 +353,8 @@ static struct kauai_timing shasta_pio_timings[] =
{ 240 , 0x040003cd },
{ 239 , 0x040003cd },
{ 180 , 0x0400028b },
- { 120 , 0x0400010a }
+ { 120 , 0x0400010a },
+ { 0 , 0 },
};
static struct kauai_timing shasta_mdma_timings[] =
@@ -411,8 +414,6 @@ kauai_lookup_timing(struct kauai_timing* table, int cycle_time)
static void pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif);
static int pmac_ide_build_dmatable(ide_drive_t *drive, struct request *rq);
-static int pmac_ide_tune_chipset(ide_drive_t *drive, u8 speed);
-static void pmac_ide_tuneproc(ide_drive_t *drive, u8 pio);
static void pmac_ide_selectproc(ide_drive_t *drive);
static void pmac_ide_kauai_selectproc(ide_drive_t *drive);
@@ -616,7 +617,7 @@ out:
* Old tuning functions (called on hdparm -p), sets up drive PIO timings
*/
static void
-pmac_ide_tuneproc(ide_drive_t *drive, u8 pio)
+pmac_ide_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
u32 *timings;
unsigned accessTicks, recTicks;
@@ -630,7 +631,6 @@ pmac_ide_tuneproc(ide_drive_t *drive, u8 pio)
/* which drive is it ? */
timings = &pmif->timings[drive->select.b.unit & 0x01];
- pio = ide_get_best_pio_mode(drive, pio, 4);
cycle_time = ide_pio_cycle_time(drive, pio);
switch (pmif->kind) {
@@ -698,8 +698,10 @@ pmac_ide_tuneproc(ide_drive_t *drive, u8 pio)
drive->name, pio, *timings);
#endif
- if (drive->select.all == HWIF(drive)->INB(IDE_SELECT_REG))
- pmac_ide_do_update_timings(drive);
+ if (pmac_ide_do_setfeature(drive, XFER_PIO_0 + pio))
+ return;
+
+ pmac_ide_do_update_timings(drive);
}
#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
@@ -915,13 +917,12 @@ set_timings_mdma(ide_drive_t *drive, int intf_type, u32 *timings, u32 *timings2,
/*
* Speedproc. This function is called by the core to set any of the standard
- * timing (PIO, MDMA or UDMA) to both the drive and the controller.
+ * DMA timing (MDMA or UDMA) to both the drive and the controller.
* You may notice we don't use this function on normal "dma check" operation,
* our dedicated function is more precise as it uses the drive provided
* cycle time value. We should probably fix this one to deal with that too...
*/
-static int
-pmac_ide_tune_chipset (ide_drive_t *drive, byte speed)
+static int pmac_ide_tune_chipset(ide_drive_t *drive, const u8 speed)
{
int unit = (drive->select.b.unit & 0x01);
int ret = 0;
@@ -937,17 +938,9 @@ pmac_ide_tune_chipset (ide_drive_t *drive, byte speed)
switch(speed) {
#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
case XFER_UDMA_6:
- if (pmif->kind != controller_sh_ata6)
- return 1;
case XFER_UDMA_5:
- if (pmif->kind != controller_un_ata6 &&
- pmif->kind != controller_k2_ata6 &&
- pmif->kind != controller_sh_ata6)
- return 1;
case XFER_UDMA_4:
case XFER_UDMA_3:
- if (drive->hwif->cbl != ATA_CBL_PATA80)
- return 1;
case XFER_UDMA_2:
case XFER_UDMA_1:
case XFER_UDMA_0:
@@ -971,13 +964,6 @@ pmac_ide_tune_chipset (ide_drive_t *drive, byte speed)
case XFER_SW_DMA_0:
return 1;
#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
- case XFER_PIO_4:
- case XFER_PIO_3:
- case XFER_PIO_2:
- case XFER_PIO_1:
- case XFER_PIO_0:
- pmac_ide_tuneproc(drive, speed & 0x07);
- break;
default:
ret = 1;
}
@@ -1251,7 +1237,7 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif)
hwif->drives[0].unmask = 1;
hwif->drives[1].unmask = 1;
hwif->pio_mask = ATA_PIO4;
- hwif->tuneproc = pmac_ide_tuneproc;
+ hwif->set_pio_mode = pmac_ide_set_pio_mode;
if (pmif->kind == controller_un_ata6
|| pmif->kind == controller_k2_ata6
|| pmif->kind == controller_sh_ata6)