ENGR00117737-1 MX28 SD/MMC/SDIO

rename the ssp mmc/sd driver.

Signed-off-by: Richard Zhu <r65037@freescale.com>

1 files changed, 1095 insertions, 0 deletions

diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
new file mode 100644
index 000000000000..895a14291006
--- /dev/null
+++ b/drivers/mmc/host/mxs-mmc.c
@@ -0,0 +1,1095 @@
+/*
+ * Copyright (C) 2007 SigmaTel, Inc., Ioannis Kappas <ikappas@sigmatel.com>
+ *
+ * Portions copyright (C) 2003 Russell King, PXA MMCI Driver
+ * Portions copyright (C) 2004-2005 Pierre Ossman, W83L51xD SD/MMC driver
+ *
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/highmem.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/completion.h>
+#include <linux/mmc/host.h>
+#include <linux/gpio.h>
+#include <linux/regulator/consumer.h>
+#include <mach/hardware.h>
+#include <mach/dma.h>
+#include <mach/regs-apbh.h>
+#include <mach/regs-ssp.h>
+#include <mach/regs-clkctrl.h>
+#include <mach/stmp3xxx.h>
+#include <mach/mmc.h>
+#include <mach/platform.h>
+
+#define DRIVER_NAME	"stmp3xxx-mmc"
+
+#define CLOCKRATE_MIN 400000
+#define CLOCKRATE_MAX 48000000
+
+/*
+ * Card detect polling timeout
+ */
+#define STMP37XX_MMC_DETECT_TIMEOUT		(HZ/2)
+
+/* Max value supported for XFER_COUNT */
+#define SSP_BUFFER_SIZE		(65536 - 512)
+
+struct stmp3xxx_mmc_host {
+	struct device *dev;
+	struct mmc_host *mmc;
+
+	struct clk *clk;
+	unsigned int clkrt;
+
+	struct mmc_request *mrq;
+	struct mmc_command *cmd;
+	struct mmc_data *data;
+
+	/* Whether the card is capable of 4-bit data */
+	int bus_width_4:1;
+
+	/* Whether SD card is present */
+	unsigned present:1;
+
+	/* Polling timer */
+	struct timer_list timer;
+
+	/* SSP interface which MMC/SD card slot is attached to */
+	void __iomem *ssp_base;
+
+	/* DMA channel used for this host */
+	unsigned int dmach;
+
+	/* IRQs */
+	int dmairq, errirq;
+
+	/* DMA descriptor to transfer data over SSP interface */
+	struct stmp3xxx_dma_descriptor dma_desc;
+
+	/* DMA buffer */
+	dma_addr_t dma_buf_phys;
+	char *dma_buf;
+
+	struct completion dma_done;
+	/* status on last interrupt */
+	u32 status;
+	int read_uA, write_uA;
+	struct regulator *regulator;
+};
+
+/* Return read only state of card */
+static int stmp3xxx_mmc_get_ro(struct mmc_host *mmc)
+{
+	struct stmp3xxx_mmc_host *host = mmc_priv(mmc);
+	struct stmp3xxxmmc_platform_data *pdata = host->dev->platform_data;
+
+	if (pdata && pdata->get_wp)
+		return pdata->get_wp();
+
+	return 0;
+}
+
+/* Detect if card is plugged */
+static inline int stmp3xxx_mmc_is_plugged(struct stmp3xxx_mmc_host *host)
+{
+	u32 status = __raw_readl(host->ssp_base + HW_SSP_STATUS);
+	return !(status & BM_SSP_STATUS_CARD_DETECT);
+}
+
+/* Card detection polling function */
+static void stmp3xxx_mmc_detect_poll(unsigned long arg)
+{
+	struct stmp3xxx_mmc_host *host = (struct stmp3xxx_mmc_host *)arg;
+	int card_status;
+
+	card_status = stmp3xxx_mmc_is_plugged(host);
+	if (card_status != host->present) {
+		host->present = card_status;
+		mmc_detect_change(host->mmc, 0);
+	}
+
+	mod_timer(&host->timer, jiffies + STMP37XX_MMC_DETECT_TIMEOUT);
+}
+
+#define STMP3XXX_MMC_IRQ_BITS  (BM_SSP_CTRL1_SDIO_IRQ		| \
+				BM_SSP_CTRL1_RESP_ERR_IRQ	| \
+				BM_SSP_CTRL1_RESP_TIMEOUT_IRQ	| \
+				BM_SSP_CTRL1_DATA_TIMEOUT_IRQ	| \
+				BM_SSP_CTRL1_DATA_CRC_IRQ	| \
+				BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ	| \
+				BM_SSP_CTRL1_RECV_TIMEOUT_IRQ   | \
+				BM_SSP_CTRL1_FIFO_OVERRUN_IRQ)
+
+/* SSP DMA interrupt handler */
+static irqreturn_t mmc_irq_handler(int irq, void *dev_id)
+{
+	struct stmp3xxx_mmc_host *host = dev_id;
+	u32 c1;
+
+	c1 = __raw_readl(host->ssp_base + HW_SSP_CTRL1);
+	__raw_writel(c1 & STMP3XXX_MMC_IRQ_BITS,
+			host->ssp_base + HW_SSP_CTRL1_CLR);
+	if (irq == host->dmairq)
+		stmp3xxx_dma_clear_interrupt(host->dmach);
+	host->status =
+	    __raw_readl(host->ssp_base + HW_SSP_STATUS);
+
+	if (host->cmd)		/* else it is a bogus interrupt */
+		complete(&host->dma_done);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Check for MMC command errors
+ * Returns error code or zerro if no errors
+ */
+static inline int stmp3xxx_mmc_cmd_error(u32 status)
+{
+	int err = 0;
+
+	if (status & BM_SSP_STATUS_TIMEOUT)
+		err = -ETIMEDOUT;
+	else if (status & BM_SSP_STATUS_RESP_TIMEOUT)
+		err = -ETIMEDOUT;
+	else if (status & BM_SSP_STATUS_RESP_CRC_ERR)
+		err = -EILSEQ;
+	else if (status & BM_SSP_STATUS_RESP_ERR)
+		err = -EIO;
+
+	return err;
+}
+
+/* Send the BC command to the device */
+static void stmp3xxx_mmc_bc(struct stmp3xxx_mmc_host *host)
+{
+	struct mmc_command *cmd = host->cmd;
+	struct stmp3xxx_dma_descriptor *dma_desc = &host->dma_desc;
+
+	dma_desc->command->cmd = BM_APBH_CHn_CMD_WAIT4ENDCMD | BM_APBH_CHn_CMD_SEMAPHORE | BM_APBH_CHn_CMD_IRQONCMPLT | BF(0, APBH_CHn_CMD_XFER_COUNT) | BF(3, APBH_CHn_CMD_CMDWORDS) | BF(0, APBH_CHn_CMD_COMMAND);	/* NO_DMA_XFER */
+
+	dma_desc->command->pio_words[0] = BM_SSP_CTRL0_ENABLE |
+	    BM_SSP_CTRL0_IGNORE_CRC;
+	dma_desc->command->pio_words[1] = BF(cmd->opcode, SSP_CMD0_CMD) |
+	    BM_SSP_CMD0_APPEND_8CYC;
+	dma_desc->command->pio_words[2] = BF(cmd->arg, SSP_CMD1_CMD_ARG);
+
+	init_completion(&host->dma_done);
+	stmp3xxx_dma_reset_channel(host->dmach);
+	stmp3xxx_dma_go(host->dmach, dma_desc, 1);
+	wait_for_completion(&host->dma_done);
+
+	cmd->error = stmp3xxx_mmc_cmd_error(host->status);
+
+	if (stmp3xxx_dma_running(host->dmach))
+		dev_dbg(host->dev, "DMA command not finished\n");
+
+	if (cmd->error) {
+		dev_dbg(host->dev, "Command error 0x%x\n", cmd->error);
+		stmp3xxx_dma_reset_channel(host->dmach);
+	}
+}
+
+/* Send the ac command to the device */
+static void stmp3xxx_mmc_ac(struct stmp3xxx_mmc_host *host)
+{
+	struct mmc_command *cmd = host->cmd;
+	struct stmp3xxx_dma_descriptor *dma_desc = &host->dma_desc;
+	u32 ignore_crc, resp, long_resp;
+	u32 ssp_ctrl0;
+	u32 ssp_cmd0;
+	u32 ssp_cmd1;
+
+	ignore_crc = (mmc_resp_type(cmd) & MMC_RSP_CRC) ?
+	    0 : BM_SSP_CTRL0_IGNORE_CRC;
+	resp = (mmc_resp_type(cmd) & MMC_RSP_PRESENT) ?
+	    BM_SSP_CTRL0_GET_RESP : 0;
+	long_resp = (mmc_resp_type(cmd) & MMC_RSP_136) ?
+	    BM_SSP_CTRL0_LONG_RESP : 0;
+
+	dma_desc->command->cmd =
+	    BM_APBH_CHn_CMD_WAIT4ENDCMD |
+	    BM_APBH_CHn_CMD_SEMAPHORE |
+	    BM_APBH_CHn_CMD_IRQONCMPLT |
+	    BF(0, APBH_CHn_CMD_XFER_COUNT) |
+	    BF(3, APBH_CHn_CMD_CMDWORDS) | BF(0, APBH_CHn_CMD_COMMAND);
+
+	ssp_ctrl0 = BM_SSP_CTRL0_ENABLE | ignore_crc | long_resp | resp;
+	ssp_cmd0 = BF(cmd->opcode, SSP_CMD0_CMD);
+	ssp_cmd1 = BF(cmd->arg, SSP_CMD1_CMD_ARG);
+
+	dma_desc->command->pio_words[0] = ssp_ctrl0;
+	dma_desc->command->pio_words[1] = ssp_cmd0;
+	dma_desc->command->pio_words[2] = ssp_cmd1;
+
+	stmp3xxx_dma_reset_channel(host->dmach);
+	init_completion(&host->dma_done);
+	stmp3xxx_dma_go(host->dmach, dma_desc, 1);
+	wait_for_completion(&host->dma_done);
+
+	switch (mmc_resp_type(cmd)) {
+	case MMC_RSP_NONE:
+		while (__raw_readl(host->ssp_base + HW_SSP_CTRL0)
+		       & BM_SSP_CTRL0_RUN)
+			continue;
+		break;
+	case MMC_RSP_R1:
+	case MMC_RSP_R1B:
+	case MMC_RSP_R3:
+		cmd->resp[0] =
+		    __raw_readl(host->ssp_base + HW_SSP_SDRESP0);
+		break;
+	case MMC_RSP_R2:
+		cmd->resp[3] =
+		    __raw_readl(host->ssp_base + HW_SSP_SDRESP0);
+		cmd->resp[2] =
+		    __raw_readl(host->ssp_base + HW_SSP_SDRESP1);
+		cmd->resp[1] =
+		    __raw_readl(host->ssp_base + HW_SSP_SDRESP2);
+		cmd->resp[0] =
+		    __raw_readl(host->ssp_base + HW_SSP_SDRESP3);
+		break;
+	default:
+		dev_warn(host->dev, "Unsupported response type 0x%x\n",
+			 mmc_resp_type(cmd));
+		BUG();
+		break;
+	}
+
+	cmd->error = stmp3xxx_mmc_cmd_error(host->status);
+
+	if (stmp3xxx_dma_running(host->dmach))
+		dev_dbg(host->dev, "DMA command not finished\n");
+
+	if (cmd->error) {
+		dev_dbg(host->dev, "Command error 0x%x\n", cmd->error);
+		stmp3xxx_dma_reset_channel(host->dmach);
+	}
+}
+
+/* Copy data between sg list and dma buffer */
+static unsigned int stmp3xxx_sg_dma_copy(struct stmp3xxx_mmc_host *host,
+					 unsigned int size, int to_dma)
+{
+	struct mmc_data *data = host->cmd->data;
+	unsigned int copy_size, bytes_copied = 0;
+	struct scatterlist *sg;
+	char *dmabuf = host->dma_buf;
+	char *sgbuf;
+	int len, i;
+
+	sg = data->sg;
+	len = data->sg_len;
+
+	/*
+	 * Just loop through all entries. Size might not
+	 * be the entire list though so make sure that
+	 * we do not transfer too much.
+	 */
+	for (i = 0; i < len; i++) {
+		sgbuf = kmap_atomic(sg_page(&sg[i]), KM_BIO_SRC_IRQ) +
+		    sg[i].offset;
+		copy_size = size < sg[i].length ? size : sg[i].length;
+		if (to_dma)
+			memcpy(dmabuf, sgbuf, copy_size);
+		else
+			memcpy(sgbuf, dmabuf, copy_size);
+		kunmap_atomic(sgbuf, KM_BIO_SRC_IRQ);
+
+		dmabuf += sg[i].length;
+
+		bytes_copied += copy_size;
+		size -= copy_size;
+
+		if (size == 0)
+			break;
+	}
+
+	return bytes_copied;
+}
+
+/* Convert ns to tick count according to the current sclk speed */
+static unsigned short stmp3xxx_ns_to_ssp_ticks(unsigned clock_rate, unsigned ns)
+{
+	const unsigned int ssp_timeout_mul = 4096;
+	/*
+	 * Calculate ticks in ms since ns are large numbers
+	 * and might overflow
+	 */
+	const unsigned int clock_per_ms = clock_rate / 1000;
+	const unsigned int ms = ns / 1000;
+	const unsigned int ticks = ms * clock_per_ms;
+	const unsigned int ssp_ticks = ticks / ssp_timeout_mul;
+
+	BUG_ON(ssp_ticks == 0);
+	return ssp_ticks;
+}
+
+static void __init_reg(struct device *dev, struct regulator **pp_reg)
+{
+	struct regulator *reg = *pp_reg;
+
+	if (!reg) {
+		reg = regulator_get(NULL, "mmc_ssp-1");
+		if (reg && !IS_ERR(reg))
+			regulator_set_mode(reg, REGULATOR_MODE_NORMAL);
+		else
+			reg = NULL;
+		*pp_reg = reg;
+	}
+}
+
+/* Send adtc command to the card */
+static void stmp3xxx_mmc_adtc(struct stmp3xxx_mmc_host *host)
+{
+	struct mmc_command *cmd = host->cmd;
+	struct stmp3xxx_dma_descriptor *dma_desc = &host->dma_desc;
+	int ignore_crc, resp, long_resp;
+	int is_reading = 0;
+	unsigned int copy_size;
+
+	u32 ssp_ctrl0;
+	u32 ssp_cmd0;
+	u32 ssp_cmd1;
+	u32 timeout;
+	u32 val;
+
+	u32 data_size = cmd->data->blksz * cmd->data->blocks;
+	u32 log2_block_size;
+
+	ignore_crc = mmc_resp_type(cmd) & MMC_RSP_CRC ? 0 : 1;
+	resp = mmc_resp_type(cmd) & MMC_RSP_PRESENT ? 1 : 0;
+	long_resp = mmc_resp_type(cmd) & MMC_RSP_136 ? 1 : 0;
+
+	dev_dbg(host->dev, "ADTC command:\n"
+		"response: %d, ignore crc: %d\n"
+		"data list: %u, blocksz: %u, blocks: %u, timeout: %uns %uclks, "
+		"flags: 0x%x\n", resp, ignore_crc, cmd->data->sg_len,
+		cmd->data->blksz, cmd->data->blocks, cmd->data->timeout_ns,
+		cmd->data->timeout_clks, cmd->data->flags);
+
+	if (cmd->data->flags & MMC_DATA_WRITE) {
+		dev_dbg(host->dev, "Data Write\n");
+		copy_size = stmp3xxx_sg_dma_copy(host, data_size, 1);
+		BUG_ON(copy_size < data_size);
+		is_reading = 0;
+		if (!host->regulator)
+			__init_reg(host->dev, &host->regulator);
+		if (host->regulator)
+			regulator_set_current_limit(host->regulator,
+						    host->write_uA,
+						    host->write_uA);
+	} else if (cmd->data->flags & MMC_DATA_READ) {
+		dev_dbg(host->dev, "Data Read\n");
+		is_reading = 1;
+		if (!host->regulator)
+			__init_reg(host->dev, &host->regulator);
+		if (host->regulator)
+			regulator_set_current_limit(host->regulator,
+						    host->read_uA,
+						    host->read_uA);
+	} else {
+		dev_warn(host->dev, "Unsuspported data mode, 0x%x\n",
+			 cmd->data->flags);
+		BUG();
+	}
+
+	BUG_ON(cmd->data->flags & MMC_DATA_STREAM);
+	BUG_ON((data_size % 8) > 0);
+
+	dma_desc->command->cmd =
+	    BM_APBH_CHn_CMD_WAIT4ENDCMD |
+	    BM_APBH_CHn_CMD_SEMAPHORE |
+	    BM_APBH_CHn_CMD_IRQONCMPLT |
+	    BF(data_size, APBH_CHn_CMD_XFER_COUNT) |
+	    BF(3, APBH_CHn_CMD_CMDWORDS);
+
+	/* when is_reading is set, DMA controller performs WRITE operation. */
+	dma_desc->command->cmd |=
+	    BF(is_reading ? BV_APBH_CHn_CMD_COMMAND__DMA_WRITE :
+			     BV_APBH_CHn_CMD_COMMAND__DMA_READ,
+			     APBH_CHn_CMD_COMMAND);
+	ssp_ctrl0 =
+	    (ignore_crc ? BM_SSP_CTRL0_IGNORE_CRC : 0) | (resp ?
+							  BM_SSP_CTRL0_GET_RESP
+							  : 0) | (long_resp ?
+								  BM_SSP_CTRL0_LONG_RESP
+								  : 0) |
+	    (is_reading ? BM_SSP_CTRL0_READ : 0) | BM_SSP_CTRL0_DATA_XFER |
+	    BM_SSP_CTRL0_WAIT_FOR_IRQ | BM_SSP_CTRL0_ENABLE | BF(data_size,
+								 SSP_CTRL0_XFER_COUNT)
+	    | BF(host->bus_width_4 ? BV_SSP_CTRL0_BUS_WIDTH__FOUR_BIT :
+				     BV_SSP_CTRL0_BUS_WIDTH__ONE_BIT,
+				     SSP_CTRL0_BUS_WIDTH);
+
+	/*
+	 * We need to set the hardware register to the logarithm to base 2 of
+	 * the block size.
+	 */
+	log2_block_size = ilog2(cmd->data->blksz);
+
+	ssp_cmd0 =
+	    BF(log2_block_size, SSP_CMD0_BLOCK_SIZE) |
+	    BF(cmd->opcode, SSP_CMD0_CMD) |
+	    BF(cmd->data->blocks - 1, SSP_CMD0_BLOCK_COUNT);
+
+	if (cmd->opcode == 12)
+		ssp_cmd0 |= BM_SSP_CMD0_APPEND_8CYC;
+
+	ssp_cmd1 = BF(cmd->arg, SSP_CMD1_CMD_ARG);
+
+	dma_desc->command->pio_words[0] = ssp_ctrl0;
+	dma_desc->command->pio_words[1] = ssp_cmd0;
+	dma_desc->command->pio_words[2] = ssp_cmd1;
+
+	/* Set the timeout count */
+	timeout = stmp3xxx_ns_to_ssp_ticks(host->clkrt, cmd->data->timeout_ns);
+	val = __raw_readl(host->ssp_base + HW_SSP_TIMING);
+	val &= ~(BM_SSP_TIMING_TIMEOUT);
+	val |= BF(timeout, SSP_TIMING_TIMEOUT);
+	__raw_writel(val, host->ssp_base + HW_SSP_TIMING);
+
+	init_completion(&host->dma_done);
+	stmp3xxx_dma_reset_channel(host->dmach);
+	stmp3xxx_dma_go(host->dmach, dma_desc, 1);
+	wait_for_completion(&host->dma_done);
+	if (host->regulator)
+		regulator_set_current_limit(host->regulator, 0, 0);
+
+	switch (mmc_resp_type(cmd)) {
+	case MMC_RSP_NONE:
+		break;
+	case MMC_RSP_R1:
+	case MMC_RSP_R3:
+		cmd->resp[0] =
+		    __raw_readl(host->ssp_base + HW_SSP_SDRESP0);
+		break;
+	case MMC_RSP_R2:
+		cmd->resp[3] =
+		    __raw_readl(host->ssp_base + HW_SSP_SDRESP0);
+		cmd->resp[2] =
+		    __raw_readl(host->ssp_base + HW_SSP_SDRESP1);
+		cmd->resp[1] =
+		    __raw_readl(host->ssp_base + HW_SSP_SDRESP2);
+		cmd->resp[0] =
+		    __raw_readl(host->ssp_base + HW_SSP_SDRESP3);
+		break;
+	default:
+		dev_warn(host->dev, "Unsupported response type 0x%x\n",
+			 mmc_resp_type(cmd));
+		BUG();
+		break;
+	}
+
+	cmd->error = stmp3xxx_mmc_cmd_error(host->status);
+
+	if (stmp3xxx_dma_running(host->dmach))
+		dev_dbg(host->dev, "DMA command not finished\n");
+
+	if (cmd->error) {
+		dev_dbg(host->dev, "Command error 0x%x\n", cmd->error);
+		stmp3xxx_dma_reset_channel(host->dmach);
+	} else {
+		if (is_reading)
+			cmd->data->bytes_xfered =
+			    stmp3xxx_sg_dma_copy(host, data_size, 0);
+		else
+			cmd->data->bytes_xfered = data_size;
+
+		dev_dbg(host->dev, "Transferred %u bytes\n",
+			cmd->data->bytes_xfered);
+	}
+}
+
+/* Begin sedning a command to the card */
+static void stmp3xxx_mmc_start_cmd(struct stmp3xxx_mmc_host *host,
+				   struct mmc_command *cmd)
+{
+	dev_dbg(host->dev, "MMC command:\n"
+		"type: 0x%x opcode: %u, arg: %u, flags 0x%x retries: %u\n",
+		mmc_cmd_type(cmd), cmd->opcode, cmd->arg, cmd->flags,
+		cmd->retries);
+
+	host->cmd = cmd;
+
+	switch (mmc_cmd_type(cmd)) {
+	case MMC_CMD_BC:
+		stmp3xxx_mmc_bc(host);
+		break;
+	case MMC_CMD_BCR:
+		stmp3xxx_mmc_ac(host);
+		break;
+	case MMC_CMD_AC:
+		stmp3xxx_mmc_ac(host);
+		break;
+	case MMC_CMD_ADTC:
+		stmp3xxx_mmc_adtc(host);
+		break;
+	default:
+		dev_warn(host->dev, "Unknown MMC command\n");
+		BUG();
+		break;
+	}
+
+	dev_dbg(host->dev, "response: %u %u %u %u errors: %u\n",
+		cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3],
+		cmd->error);
+}
+
+/* Handle MMC request */
+static void stmp3xxx_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+	struct stmp3xxx_mmc_host *host = mmc_priv(mmc);
+
+	dev_dbg(host->dev, "MMC request\n");
+
+	host->mrq = mrq;
+
+	stmp3xxx_mmc_start_cmd(host, mrq->cmd);
+
+	if (mrq->data && mrq->data->stop) {
+		dev_dbg(host->dev, "Stop opcode is %u\n",
+			mrq->data->stop->opcode);
+		stmp3xxx_mmc_start_cmd(host, mrq->data->stop);
+	}
+
+	host->mrq = NULL;
+	mmc_request_done(mmc, mrq);
+}
+
+/*
+ * Change divisors to reflect the rate of 'hz'. Note that we should not
+ * play with clock rate, because the same source is used to clock both
+ * SSP ports.
+ */
+static void
+stmp3xxx_set_sclk_speed(struct stmp3xxx_mmc_host *host, unsigned int hz)
+{
+	unsigned long ssp;
+	u32 div1, div2;
+	u32 val;
+	struct stmp3xxxmmc_platform_data *pdata = host->dev->platform_data;
+
+	if (get_evk_board_version() == 1) {
+		/*EVK Ver1 max clock is 12M */
+		if (hz > 12000000)
+			hz = 12000000;
+	}
+
+	if (pdata && pdata->setclock) {
+		/*
+		   if the SSP is buggy and platform provides callback...
+		   well, let it be.
+		 */
+		host->clkrt = pdata->setclock(hz);
+		return;
+	}
+
+	/*
+	   ...but the RightIdea(tm) is to set divisors to match
+	   the requested clock.
+	 */
+	hz /= 1000;
+
+	ssp = clk_get_rate(host->clk);
+
+	for (div1 = 2; div1 < 254; div1 += 2) {
+		div2 = ssp / hz / div1;
+		if (div2 < 0x100)
+			break;
+	}
+	if (div1 >= 254) {
+		dev_err(host->dev, "Cannot set clock to %dkHz\n", hz);
+		return;
+	}
+
+	dev_dbg(host->dev, "Setting clock rate to %ld kHz [%x+%x] "
+		"(requested %d), source %ldk\n",
+		ssp / div1 / div2, div1, div2, hz, ssp);
+
+	val = __raw_readl(host->ssp_base + HW_SSP_TIMING);
+	val &= ~(BM_SSP_TIMING_CLOCK_DIVIDE | BM_SSP_TIMING_CLOCK_RATE);
+	val |= BF(div1, SSP_TIMING_CLOCK_DIVIDE) |
+		      BF(div2 - 1, SSP_TIMING_CLOCK_RATE);
+	__raw_writel(val, host->ssp_base + HW_SSP_TIMING);
+
+	host->clkrt = ssp / div1 / div2 * 1000;
+}
+
+/* Configure card */
+static void stmp3xxx_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct stmp3xxx_mmc_host *host = mmc_priv(mmc);
+	struct stmp3xxxmmc_platform_data *pdata;
+
+	dev_dbg(host->dev, "MMC set ios:\n"
+		"Clock %u, vdd %u, bus_mode %u, chip_select %u, "
+		"power mode %u, bus_width %u\n", ios->clock, ios->vdd,
+		ios->bus_mode, ios->chip_select, ios->power_mode,
+		ios->bus_width);
+
+	pdata = host->dev->platform_data;
+
+	if (pdata->cmd_pullup) {
+		if (ios->bus_mode == MMC_BUSMODE_PUSHPULL)
+			pdata->cmd_pullup(0);
+		else
+			pdata->cmd_pullup(1);
+	} else
+		dev_warn(host->dev,
+			 "Platform does not support CMD pin pullup control\n");
+
+	if (ios->bus_width == MMC_BUS_WIDTH_4)
+		host->bus_width_4 = 1;
+	else
+		host->bus_width_4 = 0;
+
+	if (ios->clock > 0)
+		stmp3xxx_set_sclk_speed(host, ios->clock);
+}
+
+static const struct mmc_host_ops stmp3xxx_mmc_ops = {
+	.request = stmp3xxx_mmc_request,
+	.get_ro = stmp3xxx_mmc_get_ro,
+	.set_ios = stmp3xxx_mmc_set_ios,
+};
+
+/*
+ * STMP37XX MMC/SD driver initialization
+ */
+
+/* Reset ssp peripheral to default values */
+static void stmp3xxx_mmc_reset(struct stmp3xxx_mmc_host *host)
+{
+	u32 ssp_ctrl0;
+	u32 ssp_ctrl1;
+
+	stmp3xxx_reset_block(host->ssp_base, 0);
+
+	/* Configure SSP Control Register 0 */
+	ssp_ctrl0 =
+	    BM_SSP_CTRL0_IGNORE_CRC |
+	    BF(BV_SSP_CTRL0_BUS_WIDTH__ONE_BIT, SSP_CTRL0_BUS_WIDTH);
+
+	/* Configure SSP Control Register 1 */
+	ssp_ctrl1 =
+	    BM_SSP_CTRL1_DMA_ENABLE |
+	    BM_SSP_CTRL1_POLARITY |
+	    BM_SSP_CTRL1_RECV_TIMEOUT_IRQ_EN |
+	    BM_SSP_CTRL1_DATA_CRC_IRQ_EN |
+	    BM_SSP_CTRL1_DATA_TIMEOUT_IRQ_EN |
+	    BM_SSP_CTRL1_RESP_TIMEOUT_IRQ_EN |
+	    BM_SSP_CTRL1_RESP_ERR_IRQ_EN |
+	    BF(BV_SSP_CTRL1_WORD_LENGTH__EIGHT_BITS, SSP_CTRL1_WORD_LENGTH) |
+	    BF(BV_SSP_CTRL1_SSP_MODE__SD_MMC, SSP_CTRL1_SSP_MODE);
+
+	__raw_writel(BF(0xFFFF, SSP_TIMING_TIMEOUT) |
+		     BF(2, SSP_TIMING_CLOCK_DIVIDE) |
+		     BF(0, SSP_TIMING_CLOCK_RATE),
+		     host->ssp_base + HW_SSP_TIMING);
+
+	/* Write the SSP Control Register 0 and 1 values out to the interface */
+	__raw_writel(ssp_ctrl0, host->ssp_base + HW_SSP_CTRL0);
+	__raw_writel(ssp_ctrl1, host->ssp_base + HW_SSP_CTRL1);
+}
+
+static void stmp3xxx_mmc_irq_release(struct stmp3xxx_mmc_host *host)
+{
+	free_irq(host->dmairq, host);
+	free_irq(host->errirq, host);
+}
+
+static int __init stmp3xxx_mmc_irq_init(struct stmp3xxx_mmc_host *host)
+{
+	int ret;
+
+	ret = request_irq(host->dmairq, mmc_irq_handler, 0,
+			  DRIVER_NAME " dma", host);
+	if (ret) {
+		dev_err(host->dev, "Unable to set up DMA irq handler\n");
+		goto out0;
+	}
+
+	ret = request_irq(host->errirq, mmc_irq_handler, IRQF_SHARED,
+			  DRIVER_NAME " error", host);
+	if (ret) {
+		dev_err(host->dev, "Unable to set up SSP error irq handler\n");
+		goto out1;
+	}
+	return 0;
+
+out1:
+	free_irq(host->dmairq, host);
+out0:
+	return ret;
+}
+
+/* Allocate and initialise the DMA chains */
+static int stmp3xxx_mmc_dma_init(struct stmp3xxx_mmc_host *host, int reset)
+{
+	int ret;
+
+	if (!reset) {
+		/* Allocate DMA channel */
+		ret = stmp3xxx_dma_request(host->dmach,
+					   host->dev, "STMP37XX MMC/SD");
+		if (ret) {
+			dev_err(host->dev, "Unable to request DMA channel\n");
+			return ret;
+		}
+
+		host->dma_buf = dma_alloc_coherent(host->dev, SSP_BUFFER_SIZE,
+						   &host->dma_buf_phys,
+						   GFP_DMA);
+		if (host->dma_buf == NULL) {
+			dev_err(host->dev, "Unable to allocate DMA memory\n");
+			ret = -ENOMEM;
+			goto out_mem;
+		}
+
+		ret = stmp3xxx_dma_allocate_command(host->dmach,
+						    &host->dma_desc);
+		if (ret) {
+			dev_err(host->dev,
+				"Unable to allocate DMA descriptor\n");
+			goto out_cmd;
+		}
+
+		host->dma_desc.command->next = (u32) host->dma_desc.handle;
+		host->dma_desc.command->buf_ptr = (u32) host->dma_buf_phys;
+		host->dma_desc.virtual_buf_ptr = host->dma_buf;
+	}
+
+	/* Reset DMA channel */
+	stmp3xxx_dma_reset_channel(host->dmach);
+
+	/* Enable DMA interrupt */
+	stmp3xxx_dma_clear_interrupt(host->dmach);
+	stmp3xxx_dma_enable_interrupt(host->dmach);
+
+	return 0;
+
+out_cmd:
+	dma_free_coherent(host->dev, SSP_BUFFER_SIZE, host->dma_buf,
+			  host->dma_buf_phys);
+out_mem:
+	stmp3xxx_dma_release(host->dmach);
+
+	return ret;
+}
+
+static void stmp3xxx_mmc_dma_release(struct stmp3xxx_mmc_host *host)
+{
+	stmp3xxx_dma_reset_channel(host->dmach);
+
+	dma_free_coherent(host->dev, SSP_BUFFER_SIZE, host->dma_buf,
+			  host->dma_buf_phys);
+
+	stmp3xxx_dma_free_command(host->dmach, &host->dma_desc);
+	stmp3xxx_dma_release(host->dmach);
+}
+
+/* Probe peripheral for connected cards */
+static int __init stmp3xxx_mmc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct stmp3xxxmmc_platform_data *mmc_data;
+	struct stmp3xxx_mmc_host *host;
+	struct mmc_host *mmc;
+	struct resource *r;
+	int err = 0;
+
+	mmc_data = dev->platform_data;
+	if (mmc_data == NULL) {
+		err = -EINVAL;
+		dev_err(dev, "Missing platform data\n");
+		goto out;
+	}
+
+	/* Allocate main MMC host structure */
+	mmc = mmc_alloc_host(sizeof(struct stmp3xxx_mmc_host), dev);
+	if (!mmc) {
+		dev_err(dev, "Unable to allocate MMC host\n");
+		err = -ENOMEM;
+		goto out;
+	}
+	host = mmc_priv(mmc);
+
+	host->read_uA = mmc_data->read_uA;
+	host->write_uA = mmc_data->write_uA;
+	host->regulator = regulator_get(NULL, "mmc_ssp-1");
+	if (host->regulator && !IS_ERR(host->regulator))
+		regulator_set_mode(host->regulator, REGULATOR_MODE_NORMAL);
+	else
+		host->regulator = NULL;
+
+	/* get resources: */
+
+	/*
+	 *  1. io memory
+	 */
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!r) {
+		dev_err(&pdev->dev, "failed to get IORESOURCE_MEM\n");
+		err = -ENXIO;
+		goto out_res;
+	}
+	host->ssp_base =
+		r->start - STMP3XXX_REGS_PHBASE + STMP3XXX_REGS_BASE;
+
+	/*
+	 *  2. DMA channel
+	 */
+	r = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+	if (!r) {
+		dev_err(&pdev->dev, "failed to get IORESOURCE_DMA\n");
+		err = -ENXIO;
+		goto out_res;
+	}
+	host->dmach = r->start;
+
+	/*
+	 * 3. two IRQs
+	 */
+	host->dmairq = platform_get_irq(pdev, 0);
+	if (host->dmairq < 0) {
+		dev_err(&pdev->dev, "failed to get IORESOURCE_IRQ/0\n");
+		err = host->dmairq;
+		goto out_res;
+	}
+
+	host->errirq = platform_get_irq(pdev, 1);
+	if (host->errirq < 0) {
+		dev_err(&pdev->dev, "failed to get IORESOURCE_IRQ/1\n");
+		err = host->errirq;
+		goto out_res;
+	}
+
+	/* Set up MMC pins */
+	if (mmc_data->hw_init) {
+		err = mmc_data->hw_init();
+		if (err) {
+			dev_err(dev, "MMC HW configuration failed\n");
+			goto out_res;
+		}
+	}
+
+	host->mmc = mmc;
+	host->dev = dev;
+
+	/* Set minimal clock rate */
+	host->clk = clk_get(dev, "ssp");
+	if (IS_ERR(host->clk)) {
+		err = PTR_ERR(host->clk);
+		dev_err(dev, "Clocks initialization failed\n");
+		goto out_clk;
+	}
+
+	clk_enable(host->clk);
+	stmp3xxx_set_sclk_speed(host, CLOCKRATE_MIN);
+
+	/* Reset MMC block */
+	stmp3xxx_mmc_reset(host);
+
+	/* Enable DMA */
+	err = stmp3xxx_mmc_dma_init(host, 0);
+	if (err) {
+		dev_err(dev, "DMA init failed\n");
+		goto out_dma;
+	}
+
+	/* Set up interrupt handlers */
+	err = stmp3xxx_mmc_irq_init(host);
+	if (err) {
+		dev_err(dev, "IRQ initialization failed\n");
+		goto out_irq;
+	}
+
+	/* Get current card status for further cnanges tracking */
+	host->present = stmp3xxx_mmc_is_plugged(host);
+
+	/* Add a card detection polling timer */
+	init_timer(&host->timer);
+	host->timer.function = stmp3xxx_mmc_detect_poll;
+	host->timer.data = (unsigned long)host;
+	host->timer.expires = jiffies + STMP37XX_MMC_DETECT_TIMEOUT;
+	add_timer(&host->timer);
+
+	mmc->ops = &stmp3xxx_mmc_ops;
+	mmc->f_min = CLOCKRATE_MIN;
+	mmc->f_max = CLOCKRATE_MAX;
+	mmc->caps = MMC_CAP_4_BIT_DATA;
+
+	/* Maximum block count requests. */
+	mmc->max_blk_size = 512;
+	mmc->max_blk_count = SSP_BUFFER_SIZE / 512;
+	mmc->max_hw_segs = SSP_BUFFER_SIZE / 512;
+	mmc->max_phys_segs = SSP_BUFFER_SIZE / 512;
+	mmc->max_req_size = SSP_BUFFER_SIZE;
+	mmc->max_seg_size = SSP_BUFFER_SIZE;
+
+	mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+
+	platform_set_drvdata(pdev, mmc);
+
+	err = mmc_add_host(mmc);
+	if (err) {
+		dev_err(dev, "Oh God. mmc_add_host failed\n");
+		goto out_all;
+	}
+
+	return err;
+
+out_all:
+
+out_irq:
+	stmp3xxx_mmc_dma_release(host);
+out_dma:
+	clk_disable(host->clk);
+out_clk:
+	if (mmc_data->hw_release)
+		mmc_data->hw_release();
+out_res:
+	mmc_free_host(mmc);
+out:
+	return err;
+}
+
+static int __exit stmp3xxx_mmc_remove(struct platform_device *pdev)
+{
+	struct stmp3xxx_mmc_host *host;
+	struct stmp3xxxmmc_platform_data *mmc_data;
+	struct mmc_host *mmc;
+
+	dev_info(&pdev->dev, "Removing\n");
+
+	mmc_data = pdev->dev.platform_data;
+	mmc = platform_get_drvdata(pdev);
+	platform_set_drvdata(pdev, NULL);
+
+	host = mmc_priv(mmc);
+	mmc_remove_host(mmc);
+
+	/* Disable SSP clock */
+	clk_disable(host->clk);
+	clk_put(host->clk);
+
+	/* Release IRQs */
+	stmp3xxx_mmc_irq_release(host);
+
+	/* Delete card detection timer */
+	del_timer(&host->timer);
+
+	/* Release DMA */
+	stmp3xxx_mmc_dma_release(host);
+	if (host->regulator)
+		regulator_put(host->regulator);
+
+	mmc_free_host(mmc);
+
+	if (mmc_data->hw_release)
+		mmc_data->hw_release();
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int stmp3xxx_mmc_suspend(struct platform_device *pdev,
+				pm_message_t state)
+{
+	struct stmp3xxx_mmc_host *host;
+	struct stmp3xxxmmc_platform_data *mmc_data;
+	struct mmc_host *mmc;
+	int ret = 0;
+
+	dev_dbg(&pdev->dev, "Suspending\n");
+
+	mmc_data = pdev->dev.platform_data;
+	mmc = platform_get_drvdata(pdev);
+	host = mmc_priv(mmc);
+
+	ret = mmc_suspend_host(mmc, state);
+	if (!ret) {
+		if (mmc_data && mmc_data->hw_release)
+			mmc_data->hw_release();
+		clk_disable(host->clk);
+	}
+	return ret;
+}
+
+static int stmp3xxx_mmc_resume(struct platform_device *pdev)
+{
+	struct stmp3xxx_mmc_host *host;
+	struct stmp3xxxmmc_platform_data *mmc_data;
+	struct mmc_host *mmc;
+
+	dev_dbg(&pdev->dev, "Resuming\n");
+
+	mmc_data = pdev->dev.platform_data;
+	mmc = platform_get_drvdata(pdev);
+	host = mmc_priv(mmc);
+
+	clk_enable(host->clk);
+
+	if (mmc_data->hw_init)
+		mmc_data->hw_init();
+	stmp3xxx_mmc_reset(host);
+	stmp3xxx_mmc_dma_init(host, 1);
+
+	return mmc_resume_host(mmc);
+}
+#else
+#define stmp3xxx_mmc_suspend	NULL
+#define stmp3xxx_mmc_resume	NULL
+#endif /* CONFIG_PM */
+
+static struct platform_driver stmp3xxx_mmc_driver = {
+	.probe = stmp3xxx_mmc_probe,
+	.remove = __exit_p(stmp3xxx_mmc_remove),
+	.suspend = stmp3xxx_mmc_suspend,
+	.resume = stmp3xxx_mmc_resume,
+	.driver = {
+		   .name = DRIVER_NAME,
+		   .owner = THIS_MODULE,
+		   },
+};
+
+static int __init stmp3xxx_mmc_init(void)
+{
+	int ret = 0;
+
+	ret = platform_driver_register(&stmp3xxx_mmc_driver);
+	if (ret < 0)
+		return ret;
+
+	return ret;
+}
+
+static void __exit stmp3xxx_mmc_exit(void)
+{
+	platform_driver_unregister(&stmp3xxx_mmc_driver);
+}
+
+module_init(stmp3xxx_mmc_init);
+module_exit(stmp3xxx_mmc_exit);
+
+MODULE_DESCRIPTION("STMP37xx/378x MMC peripheral");
+MODULE_LICENSE("GPL");