ENGR00278452 PU: fix system hang if run Audio loop test

cpufreq and pu power management will oprate the same register, it looks should
keep them operating in order not concurrent. Then use the cpufreq mutex in xPU
driver to make sure.
Another code bug is in pu power management which base regulator framework, we
set the reister directly not regulator, then there is the chance set_volatage
will miss the chance if this time voltage setting as the last time setting
before PU disable, but we have to do this, so add regulator_sync_voltage to
force sync the voltage setting. The drawback is setting twice...

Note:
This patch is temporary and supposed to be replaced it once we find the
root cause.

Signed-off-by: Robin Gong <b38343@freescale.com>
Acked-by: Jason Liu

2 files changed, 14 insertions, 0 deletions

diff --git a/drivers/mxc/gpu-viv/hal/os/linux/kernel/gc_hal_kernel_os.c b/drivers/mxc/gpu-viv/hal/os/linux/kernel/gc_hal_kernel_os.c
index 58a2d5e344e8..1afd1332eae5 100644
--- a/drivers/mxc/gpu-viv/hal/os/linux/kernel/gc_hal_kernel_os.c
+++ b/drivers/mxc/gpu-viv/hal/os/linux/kernel/gc_hal_kernel_os.c
@@ -6801,6 +6801,7 @@ gckOS_GetThreadID(
 **
 **      Nothing.
 */
+extern struct mutex set_cpufreq_lock;
 gceSTATUS
 gckOS_SetGPUPower(
     IN gckOS Os,
@@ -6843,8 +6844,10 @@ gckOS_SetGPUPower(
 	if((Power == gcvTRUE) && (oldPowerState == gcvFALSE))
 	{
 #if LINUX_VERSION_CODE < KERNEL_VERSION(3,5,0)
+            mutex_lock(&set_cpufreq_lock);
         if(!IS_ERR(Os->device->gpu_regulator))
             regulator_enable(Os->device->gpu_regulator);
+	    mutex_unlock(&set_cpufreq_lock);
 #else
         imx_gpc_power_up_pu(true);
 #endif
@@ -6960,8 +6963,10 @@ gckOS_SetGPUPower(
 #endif
 
 #if LINUX_VERSION_CODE < KERNEL_VERSION(3,5,0)
+	    mutex_lock(&set_cpufreq_lock);
         if(!IS_ERR(Os->device->gpu_regulator))
             regulator_disable(Os->device->gpu_regulator);
+	    mutex_unlock(&set_cpufreq_lock);
 #else
         imx_gpc_power_up_pu(false);
 #endif
diff --git a/drivers/mxc/vpu/mxc_vpu.c b/drivers/mxc/vpu/mxc_vpu.c
index 8a219db2e4a5..03f2be8c8b67 100644
--- a/drivers/mxc/vpu/mxc_vpu.c
+++ b/drivers/mxc/vpu/mxc_vpu.c
@@ -113,6 +113,7 @@ static int vpu_jpu_irq;
 static unsigned int regBk[64];
 static struct regulator *vpu_regulator;
 static unsigned int pc_before_suspend;
+extern struct mutex set_cpufreq_lock;
 
 #define	READ_REG(x)		__raw_readl(vpu_base + x)
 #define	WRITE_REG(val, x)	__raw_writel(val, vpu_base + x)
@@ -252,8 +253,10 @@ static int vpu_open(struct inode *inode, struct file *filp)
 	mutex_lock(&vpu_data.lock);
 
 	if (open_count++ == 0) {
+		mutex_lock(&set_cpufreq_lock);
 		if (!IS_ERR(vpu_regulator))
 			regulator_enable(vpu_regulator);
+		mutex_unlock(&set_cpufreq_lock);
 
 #ifdef CONFIG_SOC_IMX6Q
 		clk_enable(vpu_clk);
@@ -634,8 +637,10 @@ static int vpu_release(struct inode *inode, struct file *filp)
 		for (i = 0; i < vpu_clk_usercount; i++)
 			clk_disable(vpu_clk);
 
+		mutex_lock(&set_cpufreq_lock);
 		if (!IS_ERR(vpu_regulator))
 			regulator_disable(vpu_regulator);
+		mutex_unlock(&set_cpufreq_lock);
 
 	}
 	mutex_unlock(&vpu_data.lock);
@@ -924,8 +929,10 @@ static int vpu_suspend(struct platform_device *pdev, pm_message_t state)
 
 		/* If VPU is working before suspend, disable
 		 * regulator to make usecount right. */
+		mutex_lock(&set_cpufreq_lock);
 		if (!IS_ERR(vpu_regulator))
 			regulator_disable(vpu_regulator);
+		mutex_unlock(&set_cpufreq_lock);
 	}
 
 	mutex_unlock(&vpu_data.lock);
@@ -952,8 +959,10 @@ static int vpu_resume(struct platform_device *pdev)
 
 		/* If VPU is working before suspend, enable
 		 * regulator to make usecount right. */
+		mutex_lock(&set_cpufreq_lock);
 		if (!IS_ERR(vpu_regulator))
 			regulator_enable(vpu_regulator);
+		mutex_unlock(&set_cpufreq_lock);
 
 		if (vpu_plat->pg)
 			vpu_plat->pg(0);