diff options
author | Peter Chen <peter.chen@freescale.com> | 2011-03-24 14:25:45 +0800 |
---|---|---|
committer | Peter Chen <peter.chen@freescale.com> | 2011-03-24 15:40:26 +0800 |
commit | 0d8444e23e422135ce0caa8b95de1e07052706c7 (patch) | |
tree | a9e212f3aee0d57cc14f76efc0b11e848deaacde /drivers | |
parent | bc676214b92db468c7b72dc495312809dbfc37bf (diff) |
ENGR00141092 usb: fix some tiny bugs for usbrel_imx_2.6.35_11.03.00
For android system, the gadget driver is built in, when the usb
device is on otg port, the udc suspended counter will be error at
the situation. This patch fix it, if this situation is met, the
udc suspended counter will be not added.
Using A VBus Valid to judge whether the usb cable is connected, as
some boards' vbus may higher than 0.8v(B Session Valid)
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/usb/gadget/arcotg_udc.c | 22 | ||||
-rw-r--r-- | drivers/usb/gadget/arcotg_udc.h | 1 | ||||
-rw-r--r-- | drivers/usb/host/ehci-arc.c | 5 |
3 files changed, 19 insertions, 9 deletions
diff --git a/drivers/usb/gadget/arcotg_udc.c b/drivers/usb/gadget/arcotg_udc.c index 142a61585898..0b5c8b66256d 100644 --- a/drivers/usb/gadget/arcotg_udc.c +++ b/drivers/usb/gadget/arcotg_udc.c @@ -320,6 +320,7 @@ static void dr_phy_low_power_mode(struct fsl_udc *udc, bool enable) struct fsl_usb2_platform_data *pdata = udc->pdata; u32 portsc; + pdata->lowpower = enable; if (pdata && pdata->phy_lowpower_suspend) { pdata->phy_lowpower_suspend(pdata, enable); } else { @@ -333,7 +334,6 @@ static void dr_phy_low_power_mode(struct fsl_udc *udc, bool enable) fsl_writel(portsc, &dr_regs->portsc1); } } - pdata->lowpower = enable; } @@ -3120,9 +3120,6 @@ static int udc_suspend(struct fsl_udc *udc) else dr_wake_up_enable(udc, true); } - mode = fsl_readl(&dr_regs->usbmode) & USB_MODE_CTRL_MODE_MASK; - usbcmd = fsl_readl(&dr_regs->usbcmd); - /* * If the controller is already stopped, then this must be a * PM suspend. Remember this fact, so that we will leave the @@ -3133,6 +3130,8 @@ static int udc_suspend(struct fsl_udc *udc) goto out; } + mode = fsl_readl(&dr_regs->usbmode) & USB_MODE_CTRL_MODE_MASK; + usbcmd = fsl_readl(&dr_regs->usbcmd); if (mode != USB_MODE_CTRL_MODE_DEVICE) { printk(KERN_DEBUG "gadget not in device mode, leaving early\n"); goto out; @@ -3154,7 +3153,7 @@ static int udc_suspend(struct fsl_udc *udc) * In that case, the usb device can be remained on suspend state * and the dp will not be changed. */ - if (!(fsl_readl(&dr_regs->otgsc) & OTGSC_B_SESSION_VALID)) { + if (!(fsl_readl(&dr_regs->otgsc) & OTGSC_A_BUS_VALID)) { /* stop the controller */ usbcmd = fsl_readl(&dr_regs->usbcmd) & ~USB_CMD_RUN_STOP; fsl_writel(usbcmd, &dr_regs->usbcmd); @@ -3163,9 +3162,16 @@ static int udc_suspend(struct fsl_udc *udc) dr_phy_low_power_mode(udc, true); printk(KERN_DEBUG "USB Gadget suspend ends\n"); out: + if (udc->suspended > 1) { + pr_warning( + "It's the case usb device is on otg port and the gadget driver" + "is loaded during boots up\n" + "So, do not increase suspended counter Or there is a error, " + "please debug it !!! \n" + ); + return 0; + } udc->suspended++; - if (udc->suspended > 2) - printk(KERN_ERR "ERROR: suspended times > 2\n"); return 0; } @@ -3177,6 +3183,8 @@ out: static int fsl_udc_suspend(struct platform_device *pdev, pm_message_t state) { int ret; + pr_debug("%s(): stopped %d suspended %d\n", __func__, + udc_controller->stopped, udc_controller->suspended); #ifdef CONFIG_USB_OTG if (udc_controller->transceiver->gadget == NULL) return 0; diff --git a/drivers/usb/gadget/arcotg_udc.h b/drivers/usb/gadget/arcotg_udc.h index bc88afb360c3..8c154d0e858e 100644 --- a/drivers/usb/gadget/arcotg_udc.h +++ b/drivers/usb/gadget/arcotg_udc.h @@ -265,6 +265,7 @@ struct usb_sys_interface { #define OTGSC_B_SESSION_VALID_IRQ_EN (1 << 27) #define OTGSC_B_SESSION_VALID_IRQ_STS (1 << 19) #define OTGSC_B_SESSION_VALID (1 << 11) +#define OTGSC_A_BUS_VALID (1 << 9) /* bit 28 is parallel transceiver width for UTMI interface */ #define PORTSCX_PTW (0x10000000) diff --git a/drivers/usb/host/ehci-arc.c b/drivers/usb/host/ehci-arc.c index cf932e3b5466..e54eef85237c 100644 --- a/drivers/usb/host/ehci-arc.c +++ b/drivers/usb/host/ehci-arc.c @@ -1,6 +1,6 @@ /* * Copyright (c) 2005 MontaVista Software - * Copyright (C) 2011 Freescale Semiconductor + * Copyright (C) 2011 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -33,6 +33,8 @@ extern int usb_host_wakeup_irq(struct device *wkup_dev); extern void usb_host_set_wakeup(struct device *wkup_dev, bool para); static void fsl_usb_lowpower_mode(struct fsl_usb2_platform_data *pdata, bool enable) { + pdata->lowpower = enable; + if (enable) { if (pdata->phy_lowpower_suspend) pdata->phy_lowpower_suspend(pdata, true); @@ -40,7 +42,6 @@ static void fsl_usb_lowpower_mode(struct fsl_usb2_platform_data *pdata, bool ena if (pdata->phy_lowpower_suspend) pdata->phy_lowpower_suspend(pdata, false); } - pdata->lowpower = enable; } static void fsl_usb_clk_gate(struct fsl_usb2_platform_data *pdata, bool enable) |