Merge branch 'for-mfd-and-power' of git://git.linaro.org/people/ljones/linux-3.0-ux500

Conflicts:
	drivers/mfd/ab8500-gpadc.c

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

13 files changed, 4276 insertions, 892 deletions

diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index 7c84ced2e01b..f276352cc9ef 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -95,6 +95,7 @@
 #define AB8500_IT_MASK22_REG		0x55
 #define AB8500_IT_MASK23_REG		0x56
 #define AB8500_IT_MASK24_REG		0x57
+#define AB8500_IT_MASK25_REG		0x58
 
 /*
  * latch hierarchy registers
@@ -102,15 +103,25 @@
 #define AB8500_IT_LATCHHIER1_REG	0x60
 #define AB8500_IT_LATCHHIER2_REG	0x61
 #define AB8500_IT_LATCHHIER3_REG	0x62
+#define AB8540_IT_LATCHHIER4_REG	0x63
 
 #define AB8500_IT_LATCHHIER_NUM		3
+#define AB8540_IT_LATCHHIER_NUM		4
 
 #define AB8500_REV_REG			0x80
 #define AB8500_IC_NAME_REG		0x82
 #define AB8500_SWITCH_OFF_STATUS	0x00
 
 #define AB8500_TURN_ON_STATUS		0x00
+#define AB8505_TURN_ON_STATUS_2	0x04
 
+#define AB8500_CH_USBCH_STAT1_REG	0x02
+#define VBUS_DET_DBNC100		0x02
+#define VBUS_DET_DBNC1			0x01
+
+static DEFINE_SPINLOCK(on_stat_lock);
+static u8 turn_on_stat_mask = 0xFF;
+static u8 turn_on_stat_set;
 static bool no_bm; /* No battery management */
 module_param(no_bm, bool, S_IRUGO);
 
@@ -130,9 +141,15 @@ static const int ab8500_irq_regoffset[AB8500_NUM_IRQ_REGS] = {
 	0, 1, 2, 3, 4, 6, 7, 8, 9, 11, 18, 19, 20, 21,
 };
 
-/* AB9540 support */
+/* AB9540 / AB8505 support */
 static const int ab9540_irq_regoffset[AB9540_NUM_IRQ_REGS] = {
-	0, 1, 2, 3, 4, 6, 7, 8, 9, 11, 18, 19, 20, 21, 12, 13, 24,
+	0, 1, 2, 3, 4, 6, 7, 8, 9, 11, 18, 19, 20, 21, 12, 13, 24, 5, 22, 23
+};
+
+/* AB8540 support */
+static const int ab8540_irq_regoffset[AB8540_NUM_IRQ_REGS] = {
+	0, 1, 2, 3, 4, -1, -1, -1, -1, 11, 18, 19, 20, 21, 12, 13, 24, 5, 22, 23,
+	25, 26, 27, 28, 29, 30, 31,
 };
 
 static const char ab8500_version_str[][7] = {
@@ -352,6 +369,9 @@ static void ab8500_irq_sync_unlock(struct irq_data *data)
 			is_ab8500_1p1_or_earlier(ab8500))
 			continue;
 
+		if (ab8500->irq_reg_offset[i] < 0)
+			continue;
+
 		ab8500->oldmask[i] = new;
 
 		reg = AB8500_IT_MASK1_REG + ab8500->irq_reg_offset[i];
@@ -423,6 +443,18 @@ static struct irq_chip ab8500_irq_chip = {
 	.irq_set_type		= ab8500_irq_set_type,
 };
 
+static void update_latch_offset(u8 *offset, int i)
+{
+	/* Fix inconsistent ITFromLatch25 bit mapping... */
+	if (unlikely(*offset == 17))
+			*offset = 24;
+	/* Fix inconsistent ab8540 bit mapping... */
+	if (unlikely(*offset == 16))
+			*offset = 25;
+	if ((i==3) && (*offset >= 24))
+			*offset += 2;
+}
+
 static int ab8500_handle_hierarchical_line(struct ab8500 *ab8500,
 					int latch_offset, u8 latch_val)
 {
@@ -474,9 +506,7 @@ static int ab8500_handle_hierarchical_latch(struct ab8500 *ab8500,
 		latch_bit = __ffs(hier_val);
 		latch_offset = (hier_offset << 3) + latch_bit;
 
-		/* Fix inconsistent ITFromLatch25 bit mapping... */
-		if (unlikely(latch_offset == 17))
-			latch_offset = 24;
+		update_latch_offset(&latch_offset, hier_offset);
 
 		status = get_register_interruptible(ab8500,
 				AB8500_INTERRUPT,
@@ -504,7 +534,7 @@ static irqreturn_t ab8500_hierarchical_irq(int irq, void *dev)
 	dev_vdbg(ab8500->dev, "interrupt\n");
 
 	/*  Hierarchical interrupt version */
-	for (i = 0; i < AB8500_IT_LATCHHIER_NUM; i++) {
+	for (i = 0; i < (ab8500->it_latchhier_num); i++) {
 		int status;
 		u8 hier_val;
 
@@ -520,63 +550,6 @@ static irqreturn_t ab8500_hierarchical_irq(int irq, void *dev)
 	return IRQ_HANDLED;
 }
 
-/**
- * ab8500_irq_get_virq(): Map an interrupt on a chip to a virtual IRQ
- *
- * @ab8500: ab8500_irq controller to operate on.
- * @irq: index of the interrupt requested in the chip IRQs
- *
- * Useful for drivers to request their own IRQs.
- */
-static int ab8500_irq_get_virq(struct ab8500 *ab8500, int irq)
-{
-	if (!ab8500)
-		return -EINVAL;
-
-	return irq_create_mapping(ab8500->domain, irq);
-}
-
-static irqreturn_t ab8500_irq(int irq, void *dev)
-{
-	struct ab8500 *ab8500 = dev;
-	int i;
-
-	dev_vdbg(ab8500->dev, "interrupt\n");
-
-	atomic_inc(&ab8500->transfer_ongoing);
-
-	for (i = 0; i < ab8500->mask_size; i++) {
-		int regoffset = ab8500->irq_reg_offset[i];
-		int status;
-		u8 value;
-
-		/*
-		 * Interrupt register 12 doesn't exist prior to AB8500 version
-		 * 2.0
-		 */
-		if (regoffset == 11 && is_ab8500_1p1_or_earlier(ab8500))
-			continue;
-
-		status = get_register_interruptible(ab8500, AB8500_INTERRUPT,
-			AB8500_IT_LATCH1_REG + regoffset, &value);
-		if (status < 0 || value == 0)
-			continue;
-
-		do {
-			int bit = __ffs(value);
-			int line = i * 8 + bit;
-			int virq = ab8500_irq_get_virq(ab8500, line);
-
-			handle_nested_irq(virq);
-			ab8500_debug_register_interrupt(line);
-			value &= ~(1 << bit);
-
-		} while (value);
-	}
-	atomic_dec(&ab8500->transfer_ongoing);
-	return IRQ_HANDLED;
-}
-
 static int ab8500_irq_map(struct irq_domain *d, unsigned int virq,
 				irq_hw_number_t hwirq)
 {
@@ -607,7 +580,9 @@ static int ab8500_irq_init(struct ab8500 *ab8500, struct device_node *np)
 {
 	int num_irqs;
 
-	if (is_ab9540(ab8500))
+	if (is_ab8540(ab8500))
+		num_irqs = AB8540_NR_IRQS;
+	else if (is_ab9540(ab8500))
 		num_irqs = AB9540_NR_IRQS;
 	else if (is_ab8505(ab8500))
 		num_irqs = AB8505_NR_IRQS;
@@ -650,6 +625,15 @@ static struct resource ab8500_gpadc_resources[] = {
 	},
 };
 
+static struct resource ab8505_gpadc_resources[] = {
+	{
+		.name	= "SW_CONV_END",
+		.start	= AB8500_INT_GP_SW_ADC_CONV_END,
+		.end	= AB8500_INT_GP_SW_ADC_CONV_END,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
 static struct resource ab8500_rtc_resources[] = {
 	{
 		.name	= "60S",
@@ -973,6 +957,30 @@ static struct resource ab8505_iddet_resources[] = {
 		.end   = AB8505_INT_KEYSTUCK,
 		.flags = IORESOURCE_IRQ,
 	},
+	{
+		.name = "VBUS_DET_R",
+		.start = AB8500_INT_VBUS_DET_R,
+		.end = AB8500_INT_VBUS_DET_R,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name = "VBUS_DET_F",
+		.start = AB8500_INT_VBUS_DET_F,
+		.end = AB8500_INT_VBUS_DET_F,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name = "ID_DET_PLUGR",
+		.start = AB8500_INT_ID_DET_PLUGR,
+		.end = AB8500_INT_ID_DET_PLUGR,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name = "ID_DET_PLUGF",
+		.start = AB8500_INT_ID_DET_PLUGF,
+		.end = AB8500_INT_ID_DET_PLUGF,
+		.flags = IORESOURCE_IRQ,
+	},
 };
 
 static struct resource ab8500_temp_resources[] = {
@@ -984,7 +992,42 @@ static struct resource ab8500_temp_resources[] = {
 	},
 };
 
-static struct mfd_cell abx500_common_devs[] = {
+static struct mfd_cell ab8500_bm_devs[] = {
+	{
+		.name = "ab8500-charger",
+		.of_compatible = "stericsson,ab8500-charger",
+		.num_resources = ARRAY_SIZE(ab8500_charger_resources),
+		.resources = ab8500_charger_resources,
+		.platform_data = &ab8500_bm_data,
+		.pdata_size = sizeof(ab8500_bm_data),
+	},
+	{
+		.name = "ab8500-btemp",
+		.of_compatible = "stericsson,ab8500-btemp",
+		.num_resources = ARRAY_SIZE(ab8500_btemp_resources),
+		.resources = ab8500_btemp_resources,
+		.platform_data = &ab8500_bm_data,
+		.pdata_size = sizeof(ab8500_bm_data),
+	},
+	{
+		.name = "ab8500-fg",
+		.of_compatible = "stericsson,ab8500-fg",
+		.num_resources = ARRAY_SIZE(ab8500_fg_resources),
+		.resources = ab8500_fg_resources,
+		.platform_data = &ab8500_bm_data,
+		.pdata_size = sizeof(ab8500_bm_data),
+	},
+	{
+		.name = "ab8500-chargalg",
+		.of_compatible = "stericsson,ab8500-chargalg",
+		.num_resources = ARRAY_SIZE(ab8500_chargalg_resources),
+		.resources = ab8500_chargalg_resources,
+		.platform_data = &ab8500_bm_data,
+		.pdata_size = sizeof(ab8500_bm_data),
+	},
+};
+
+static struct mfd_cell ab8500_devs[] = {
 #ifdef CONFIG_DEBUG_FS
 	{
 		.name = "ab8500-debug",
@@ -1007,7 +1050,6 @@ static struct mfd_cell abx500_common_devs[] = {
 	},
 	{
 		.name = "ab8500-gpadc",
-		.of_compatible = "stericsson,ab8500-gpadc",
 		.num_resources = ARRAY_SIZE(ab8500_gpadc_resources),
 		.resources = ab8500_gpadc_resources,
 	},
@@ -1024,6 +1066,7 @@ static struct mfd_cell abx500_common_devs[] = {
 		.resources = ab8500_av_acc_detect_resources,
 	},
 	{
+
 		.name = "ab8500-poweron-key",
 		.of_compatible = "stericsson,ab8500-poweron-key",
 		.num_resources = ARRAY_SIZE(ab8500_poweronkey_db_resources),
@@ -1053,82 +1096,220 @@ static struct mfd_cell abx500_common_devs[] = {
 		.of_compatible = "stericsson,ab8500-denc",
 	},
 	{
+		.name = "ab8500-gpio",
+		.of_compatible = "stericsson,ab8500-gpio",
+	},
+	{
 		.name = "abx500-temp",
 		.of_compatible = "stericsson,abx500-temp",
 		.num_resources = ARRAY_SIZE(ab8500_temp_resources),
 		.resources = ab8500_temp_resources,
 	},
+	{
+		.name = "ab8500-usb",
+		.num_resources = ARRAY_SIZE(ab8500_usb_resources),
+		.resources = ab8500_usb_resources,
+	},
+	{
+		.name = "ab8500-codec",
+	},
 };
 
-static struct mfd_cell ab8500_bm_devs[] = {
+static struct mfd_cell ab9540_devs[] = {
+#ifdef CONFIG_DEBUG_FS
 	{
-		.name = "ab8500-charger",
-		.of_compatible = "stericsson,ab8500-charger",
-		.num_resources = ARRAY_SIZE(ab8500_charger_resources),
-		.resources = ab8500_charger_resources,
-		.platform_data = &ab8500_bm_data,
-		.pdata_size = sizeof(ab8500_bm_data),
+		.name = "ab8500-debug",
+		.num_resources = ARRAY_SIZE(ab8500_debug_resources),
+		.resources = ab8500_debug_resources,
 	},
+#endif
 	{
-		.name = "ab8500-btemp",
-		.of_compatible = "stericsson,ab8500-btemp",
-		.num_resources = ARRAY_SIZE(ab8500_btemp_resources),
-		.resources = ab8500_btemp_resources,
-		.platform_data = &ab8500_bm_data,
-		.pdata_size = sizeof(ab8500_bm_data),
+		.name = "ab8500-sysctrl",
 	},
 	{
-		.name = "ab8500-fg",
-		.of_compatible = "stericsson,ab8500-fg",
-		.num_resources = ARRAY_SIZE(ab8500_fg_resources),
-		.resources = ab8500_fg_resources,
-		.platform_data = &ab8500_bm_data,
-		.pdata_size = sizeof(ab8500_bm_data),
+		.name = "ab8500-regulator",
 	},
 	{
-		.name = "ab8500-chargalg",
-		.of_compatible = "stericsson,ab8500-chargalg",
-		.num_resources = ARRAY_SIZE(ab8500_chargalg_resources),
-		.resources = ab8500_chargalg_resources,
-		.platform_data = &ab8500_bm_data,
-		.pdata_size = sizeof(ab8500_bm_data),
+		.name = "abx500-clk",
+		.of_compatible = "stericsson,abx500-clk",
+	},
+	{
+		.name = "ab8500-gpadc",
+		.of_compatible = "stericsson,ab8500-gpadc",
+		.num_resources = ARRAY_SIZE(ab8500_gpadc_resources),
+		.resources = ab8500_gpadc_resources,
+	},
+	{
+		.name = "ab8500-rtc",
+		.num_resources = ARRAY_SIZE(ab8500_rtc_resources),
+		.resources = ab8500_rtc_resources,
+	},
+	{
+		.name = "ab8500-acc-det",
+		.num_resources = ARRAY_SIZE(ab8500_av_acc_detect_resources),
+		.resources = ab8500_av_acc_detect_resources,
+	},
+	{
+		.name = "ab8500-poweron-key",
+		.num_resources = ARRAY_SIZE(ab8500_poweronkey_db_resources),
+		.resources = ab8500_poweronkey_db_resources,
+	},
+	{
+		.name = "ab8500-pwm",
+		.id = 1,
+	},
+	{
+		.name = "ab8500-leds",
+	},
+	{
+		.name = "abx500-temp",
+		.num_resources = ARRAY_SIZE(ab8500_temp_resources),
+		.resources = ab8500_temp_resources,
+	},
+	{
+		.name = "pinctrl-ab9540",
+		.of_compatible = "stericsson,ab9540-gpio",
+	},
+	{
+		.name = "ab9540-usb",
+		.num_resources = ARRAY_SIZE(ab8500_usb_resources),
+		.resources = ab8500_usb_resources,
+	},
+	{
+		.name = "ab9540-codec",
+	},
+	{
+		.name = "ab-iddet",
+		.num_resources = ARRAY_SIZE(ab8505_iddet_resources),
+		.resources = ab8505_iddet_resources,
 	},
 };
 
-static struct mfd_cell ab8500_devs[] = {
+/* Device list for ab8505  */
+static struct mfd_cell ab8505_devs[] = {
+#ifdef CONFIG_DEBUG_FS
 	{
-		.name = "pinctrl-ab8500",
-		.of_compatible = "stericsson,ab8500-gpio",
+		.name = "ab8500-debug",
+		.num_resources = ARRAY_SIZE(ab8500_debug_resources),
+		.resources = ab8500_debug_resources,
+	},
+#endif
+	{
+		.name = "ab8500-sysctrl",
+	},
+	{
+		.name = "ab8500-regulator",
+	},
+	{
+		.name = "abx500-clk",
+		.of_compatible = "stericsson,abx500-clk",
+	},
+	{
+		.name = "ab8500-gpadc",
+		.num_resources = ARRAY_SIZE(ab8505_gpadc_resources),
+		.resources = ab8505_gpadc_resources,
+	},
+	{
+		.name = "ab8500-rtc",
+		.num_resources = ARRAY_SIZE(ab8500_rtc_resources),
+		.resources = ab8500_rtc_resources,
+	},
+	{
+		.name = "ab8500-acc-det",
+		.num_resources = ARRAY_SIZE(ab8500_av_acc_detect_resources),
+		.resources = ab8500_av_acc_detect_resources,
+	},
+	{
+		.name = "ab8500-poweron-key",
+		.num_resources = ARRAY_SIZE(ab8500_poweronkey_db_resources),
+		.resources = ab8500_poweronkey_db_resources,
+	},
+	{
+		.name = "ab8500-pwm",
+		.id = 1,
+	},
+	{
+		.name = "ab8500-leds",
+	},
+	{
+		.name = "ab8500-gpio",
 	},
 	{
 		.name = "ab8500-usb",
-		.of_compatible = "stericsson,ab8500-usb",
 		.num_resources = ARRAY_SIZE(ab8500_usb_resources),
 		.resources = ab8500_usb_resources,
 	},
 	{
 		.name = "ab8500-codec",
-		.of_compatible = "stericsson,ab8500-codec",
+	},
+	{
+		.name = "ab-iddet",
+		.num_resources = ARRAY_SIZE(ab8505_iddet_resources),
+		.resources = ab8505_iddet_resources,
 	},
 };
 
-static struct mfd_cell ab9540_devs[] = {
+static struct mfd_cell ab8540_devs[] = {
+#ifdef CONFIG_DEBUG_FS
 	{
-		.name = "pinctrl-ab9540",
-		.of_compatible = "stericsson,ab9540-gpio",
+		.name = "ab8500-debug",
+		.num_resources = ARRAY_SIZE(ab8500_debug_resources),
+		.resources = ab8500_debug_resources,
+	},
+#endif
+	{
+		.name = "ab8500-sysctrl",
 	},
 	{
-		.name = "ab9540-usb",
+		.name = "ab8500-regulator",
+	},
+	{
+		.name = "abx500-clk",
+		.of_compatible = "stericsson,abx500-clk",
+	},
+	{
+		.name = "ab8500-gpadc",
+		.num_resources = ARRAY_SIZE(ab8505_gpadc_resources),
+		.resources = ab8505_gpadc_resources,
+	},
+	{
+		.name = "ab8500-rtc",
+		.num_resources = ARRAY_SIZE(ab8500_rtc_resources),
+		.resources = ab8500_rtc_resources,
+	},
+	{
+		.name = "ab8500-acc-det",
+		.num_resources = ARRAY_SIZE(ab8500_av_acc_detect_resources),
+		.resources = ab8500_av_acc_detect_resources,
+	},
+	{
+		.name = "ab8500-poweron-key",
+		.num_resources = ARRAY_SIZE(ab8500_poweronkey_db_resources),
+		.resources = ab8500_poweronkey_db_resources,
+	},
+	{
+		.name = "ab8500-pwm",
+		.id = 1,
+	},
+	{
+		.name = "ab8500-leds",
+	},
+	{
+		.name = "abx500-temp",
+		.num_resources = ARRAY_SIZE(ab8500_temp_resources),
+		.resources = ab8500_temp_resources,
+	},
+	{
+		.name = "ab8500-gpio",
+	},
+	{
+		.name = "ab8540-usb",
 		.num_resources = ARRAY_SIZE(ab8500_usb_resources),
 		.resources = ab8500_usb_resources,
 	},
 	{
-		.name = "ab9540-codec",
+		.name = "ab8540-codec",
 	},
-};
-
-/* Device list common to ab9540 and ab8505 */
-static struct mfd_cell ab9540_ab8505_devs[] = {
 	{
 		.name = "ab-iddet",
 		.num_resources = ARRAY_SIZE(ab8505_iddet_resources),
@@ -1142,6 +1323,7 @@ static ssize_t show_chip_id(struct device *dev,
 	struct ab8500 *ab8500;
 
 	ab8500 = dev_get_drvdata(dev);
+
 	return sprintf(buf, "%#x\n", ab8500 ? ab8500->chip_id : -EINVAL);
 }
 
@@ -1171,6 +1353,15 @@ static ssize_t show_switch_off_status(struct device *dev,
 	return sprintf(buf, "%#x\n", value);
 }
 
+/* use mask and set to override the register turn_on_stat value */
+void ab8500_override_turn_on_stat(u8 mask, u8 set)
+{
+	spin_lock(&on_stat_lock);
+	turn_on_stat_mask = mask;
+	turn_on_stat_set = set;
+	spin_unlock(&on_stat_lock);
+}
+
 /*
  * ab8500 has turned on due to (TURN_ON_STATUS):
  * 0x01 PORnVbat
@@ -1194,9 +1385,38 @@ static ssize_t show_turn_on_status(struct device *dev,
 		AB8500_TURN_ON_STATUS, &value);
 	if (ret < 0)
 		return ret;
+
+	/*
+	 * In L9540, turn_on_status register is not updated correctly if
+	 * the device is rebooted with AC/USB charger connected. Due to
+	 * this, the device boots android instead of entering into charge
+	 * only mode. Read the AC/USB status register to detect the charger
+	 * presence and update the turn on status manually.
+	 */
+	if (is_ab9540(ab8500)) {
+		spin_lock(&on_stat_lock);
+		value = (value & turn_on_stat_mask) | turn_on_stat_set;
+		spin_unlock(&on_stat_lock);
+	}
+
 	return sprintf(buf, "%#x\n", value);
 }
 
+static ssize_t show_turn_on_status_2(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	int ret;
+	u8 value;
+	struct ab8500 *ab8500;
+
+	ab8500 = dev_get_drvdata(dev);
+	ret = get_register_interruptible(ab8500, AB8500_SYS_CTRL1_BLOCK,
+		AB8505_TURN_ON_STATUS_2, &value);
+	if (ret < 0)
+		return ret;
+	return sprintf(buf, "%#x\n", (value & 0x1));
+}
+
 static ssize_t show_ab9540_dbbrstn(struct device *dev,
 				struct device_attribute *attr, char *buf)
 {
@@ -1253,6 +1473,7 @@ exit:
 static DEVICE_ATTR(chip_id, S_IRUGO, show_chip_id, NULL);
 static DEVICE_ATTR(switch_off_status, S_IRUGO, show_switch_off_status, NULL);
 static DEVICE_ATTR(turn_on_status, S_IRUGO, show_turn_on_status, NULL);
+static DEVICE_ATTR(turn_on_status_2, S_IRUGO, show_turn_on_status_2, NULL);
 static DEVICE_ATTR(dbbrstn, S_IRUGO | S_IWUSR,
 			show_ab9540_dbbrstn, store_ab9540_dbbrstn);
 
@@ -1263,6 +1484,11 @@ static struct attribute *ab8500_sysfs_entries[] = {
 	NULL,
 };
 
+static struct attribute *ab8505_sysfs_entries[] = {
+	&dev_attr_turn_on_status_2.attr,
+	NULL,
+};
+
 static struct attribute *ab9540_sysfs_entries[] = {
 	&dev_attr_chip_id.attr,
 	&dev_attr_switch_off_status.attr,
@@ -1275,6 +1501,10 @@ static struct attribute_group ab8500_attr_group = {
 	.attrs	= ab8500_sysfs_entries,
 };
 
+static struct attribute_group ab8505_attr_group = {
+	.attrs	= ab8505_sysfs_entries,
+};
+
 static struct attribute_group ab9540_attr_group = {
 	.attrs	= ab9540_sysfs_entries,
 };
@@ -1290,6 +1520,15 @@ static int ab8500_probe(struct platform_device *pdev)
 		"Battery level lower than power on reset threshold",
 		"Power on key 1 pressed longer than 10 seconds",
 		"DB8500 thermal shutdown"};
+	static char *turn_on_status[] = {
+		"Battery rising (Vbat)",
+		"Power On Key 1 dbF",
+		"Power On Key 2 dbF",
+		"RTC Alarm",
+		"Main Charger Detect",
+		"Vbus Detect (USB)",
+		"USB ID Detect",
+		"UART Factory Mode Detect"};
 	struct ab8500_platform_data *plat = dev_get_platdata(&pdev->dev);
 	const struct platform_device_id *platid = platform_get_device_id(pdev);
 	enum ab8500_version version = AB8500_VERSION_UNDEFINED;
@@ -1351,13 +1590,20 @@ static int ab8500_probe(struct platform_device *pdev)
 			ab8500->chip_id >> 4,
 			ab8500->chip_id & 0x0F);
 
-	/* Configure AB8500 or AB9540 IRQ */
-	if (is_ab9540(ab8500) || is_ab8505(ab8500)) {
+	/* Configure AB8540 */
+	if (is_ab8540(ab8500)) {
+		ab8500->mask_size = AB8540_NUM_IRQ_REGS;
+		ab8500->irq_reg_offset = ab8540_irq_regoffset;
+		ab8500->it_latchhier_num = AB8540_IT_LATCHHIER_NUM;
+	}/* Configure AB8500 or AB9540 IRQ */
+	else if (is_ab9540(ab8500) || is_ab8505(ab8500)) {
 		ab8500->mask_size = AB9540_NUM_IRQ_REGS;
 		ab8500->irq_reg_offset = ab9540_irq_regoffset;
+		ab8500->it_latchhier_num = AB8500_IT_LATCHHIER_NUM;
 	} else {
 		ab8500->mask_size = AB8500_NUM_IRQ_REGS;
 		ab8500->irq_reg_offset = ab8500_irq_regoffset;
+		ab8500->it_latchhier_num = AB8500_IT_LATCHHIER_NUM;
 	}
 	ab8500->mask = devm_kzalloc(&pdev->dev, ab8500->mask_size, GFP_KERNEL);
 	if (!ab8500->mask)
@@ -1396,10 +1642,36 @@ static int ab8500_probe(struct platform_device *pdev)
 	} else {
 		printk(KERN_CONT " None\n");
 	}
+	ret = get_register_interruptible(ab8500, AB8500_SYS_CTRL1_BLOCK,
+		AB8500_TURN_ON_STATUS, &value);
+	if (ret < 0)
+		return ret;
+	dev_info(ab8500->dev, "turn on reason(s) (%#x): ", value);
+
+	if (value) {
+		for (i = 0; i < ARRAY_SIZE(turn_on_status); i++) {
+			if (value & 1)
+				printk("\"%s\" ", turn_on_status[i]);
+			value = value >> 1;
+		}
+		printk("\n");
+	} else {
+		printk("None\n");
+	}
 
 	if (plat && plat->init)
 		plat->init(ab8500);
 
+	if (is_ab9540(ab8500)) {
+		ret = get_register_interruptible(ab8500, AB8500_CHARGER,
+			AB8500_CH_USBCH_STAT1_REG, &value);
+		if (ret < 0)
+			return ret;
+		if ((value & VBUS_DET_DBNC1) && (value & VBUS_DET_DBNC100))
+			ab8500_override_turn_on_stat(~AB8500_POW_KEY_1_ON,
+						     AB8500_VBUS_DET);
+	}
+
 	/* Clear and mask all interrupts */
 	for (i = 0; i < ab8500->mask_size; i++) {
 		/*
@@ -1410,6 +1682,9 @@ static int ab8500_probe(struct platform_device *pdev)
 				is_ab8500_1p1_or_earlier(ab8500))
 			continue;
 
+		if (ab8500->irq_reg_offset[i] < 0)
+			continue;
+
 		get_register_interruptible(ab8500, AB8500_INTERRUPT,
 			AB8500_IT_LATCH1_REG + ab8500->irq_reg_offset[i],
 			&value);
@@ -1428,26 +1703,10 @@ static int ab8500_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	/*  Activate this feature only in ab9540 */
-	/*  till tests are done on ab8500 1p2 or later*/
-	if (is_ab9540(ab8500)) {
-		ret = devm_request_threaded_irq(&pdev->dev, ab8500->irq, NULL,
-						ab8500_hierarchical_irq,
-						IRQF_ONESHOT | IRQF_NO_SUSPEND,
-						"ab8500", ab8500);
-	}
-	else {
-		ret = devm_request_threaded_irq(&pdev->dev, ab8500->irq, NULL,
-						ab8500_irq,
-						IRQF_ONESHOT | IRQF_NO_SUSPEND,
-						"ab8500", ab8500);
-		if (ret)
-			return ret;
-	}
-
-	ret = mfd_add_devices(ab8500->dev, 0, abx500_common_devs,
-			ARRAY_SIZE(abx500_common_devs), NULL,
-			ab8500->irq_base, ab8500->domain);
+	ret = devm_request_threaded_irq(&pdev->dev, ab8500->irq, NULL,
+			ab8500_hierarchical_irq,
+			IRQF_ONESHOT | IRQF_NO_SUSPEND,
+			"ab8500", ab8500);
 	if (ret)
 		return ret;
 
@@ -1455,6 +1714,14 @@ static int ab8500_probe(struct platform_device *pdev)
 		ret = mfd_add_devices(ab8500->dev, 0, ab9540_devs,
 				ARRAY_SIZE(ab9540_devs), NULL,
 				ab8500->irq_base, ab8500->domain);
+	else if (is_ab8540(ab8500))
+		ret = mfd_add_devices(ab8500->dev, 0, ab8540_devs,
+			      ARRAY_SIZE(ab8540_devs), NULL,
+			      ab8500->irq_base, ab8500->domain);
+	else if (is_ab8505(ab8500))
+		ret = mfd_add_devices(ab8500->dev, 0, ab8505_devs,
+			      ARRAY_SIZE(ab8505_devs), NULL,
+			      ab8500->irq_base, ab8500->domain);
 	else
 		ret = mfd_add_devices(ab8500->dev, 0, ab8500_devs,
 				ARRAY_SIZE(ab8500_devs), NULL,
@@ -1462,13 +1729,6 @@ static int ab8500_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	if (is_ab9540(ab8500) || is_ab8505(ab8500))
-		ret = mfd_add_devices(ab8500->dev, 0, ab9540_ab8505_devs,
-				ARRAY_SIZE(ab9540_ab8505_devs), NULL,
-				ab8500->irq_base, ab8500->domain);
-	if (ret)
-		return ret;
-
 	if (!no_bm) {
 		/* Add battery management devices */
 		ret = mfd_add_devices(ab8500->dev, 0, ab8500_bm_devs,
@@ -1478,12 +1738,19 @@ static int ab8500_probe(struct platform_device *pdev)
 			dev_err(ab8500->dev, "error adding bm devices\n");
 	}
 
-	if (is_ab9540(ab8500))
+	if (((is_ab8505(ab8500) || is_ab9540(ab8500)) &&
+			ab8500->chip_id >= AB8500_CUT2P0) || is_ab8540(ab8500))
 		ret = sysfs_create_group(&ab8500->dev->kobj,
 					&ab9540_attr_group);
 	else
 		ret = sysfs_create_group(&ab8500->dev->kobj,
 					&ab8500_attr_group);
+
+	if ((is_ab8505(ab8500) || is_ab9540(ab8500)) &&
+			ab8500->chip_id >= AB8500_CUT2P0)
+		ret = sysfs_create_group(&ab8500->dev->kobj,
+					 &ab8505_attr_group);
+
 	if (ret)
 		dev_err(ab8500->dev, "error creating sysfs entries\n");
 
@@ -1494,11 +1761,16 @@ static int ab8500_remove(struct platform_device *pdev)
 {
 	struct ab8500 *ab8500 = platform_get_drvdata(pdev);
 
-	if (is_ab9540(ab8500))
+	if (((is_ab8505(ab8500) || is_ab9540(ab8500)) &&
+			ab8500->chip_id >= AB8500_CUT2P0) || is_ab8540(ab8500))
 		sysfs_remove_group(&ab8500->dev->kobj, &ab9540_attr_group);
 	else
 		sysfs_remove_group(&ab8500->dev->kobj, &ab8500_attr_group);
 
+	if ((is_ab8505(ab8500) || is_ab9540(ab8500)) &&
+			ab8500->chip_id >= AB8500_CUT2P0)
+		sysfs_remove_group(&ab8500->dev->kobj, &ab8505_attr_group);
+
 	mfd_remove_devices(ab8500->dev);
 
 	return 0;
diff --git a/drivers/mfd/ab8500-debugfs.c b/drivers/mfd/ab8500-debugfs.c
index 45fe3c50eb03..b88bbbc15f1e 100644
--- a/drivers/mfd/ab8500-debugfs.c
+++ b/drivers/mfd/ab8500-debugfs.c
@@ -80,6 +80,7 @@
 #include <linux/interrupt.h>
 #include <linux/kobject.h>
 #include <linux/slab.h>
+#include <linux/irq.h>
 
 #include <linux/mfd/abx500.h>
 #include <linux/mfd/abx500/ab8500.h>
@@ -90,6 +91,9 @@
 #include <linux/ctype.h>
 #endif
 
+/* TODO: this file should not reference IRQ_DB8500_AB8500! */
+#include <mach/irqs.h>
+
 static u32 debug_bank;
 static u32 debug_address;
 
@@ -101,6 +105,11 @@ static int num_irqs;
 static struct device_attribute **dev_attr;
 static char **event_name;
 
+static u8 avg_sample = SAMPLE_16;
+static u8 trig_edge = RISING_EDGE;
+static u8 conv_type = ADC_SW;
+static u8 trig_timer;
+
 /**
  * struct ab8500_reg_range
  * @first: the first address of the range
@@ -150,7 +159,9 @@ static struct hwreg_cfg hwreg_cfg = {
 
 #define AB8500_REV_REG 0x80
 
-static struct ab8500_prcmu_ranges debug_ranges[AB8500_NUM_BANKS] = {
+static struct ab8500_prcmu_ranges *debug_ranges;
+
+struct ab8500_prcmu_ranges ab8500_debug_ranges[AB8500_NUM_BANKS] = {
 	[0x0] = {
 		.num_ranges = 0,
 		.range = NULL,
@@ -354,7 +365,7 @@ static struct ab8500_prcmu_ranges debug_ranges[AB8500_NUM_BANKS] = {
 			},
 			{
 				.first = 0xf5,
-				.last =	0xf6,
+				.last = 0xf6,
 			},
 		},
 	},
@@ -479,6 +490,781 @@ static struct ab8500_prcmu_ranges debug_ranges[AB8500_NUM_BANKS] = {
 	},
 };
 
+struct ab8500_prcmu_ranges ab8505_debug_ranges[AB8500_NUM_BANKS] = {
+	[0x0] = {
+		.num_ranges = 0,
+		.range = NULL,
+	},
+	[AB8500_SYS_CTRL1_BLOCK] = {
+		.num_ranges = 5,
+		.range = (struct ab8500_reg_range[]) {
+			{
+				.first = 0x00,
+				.last = 0x04,
+			},
+			{
+				.first = 0x42,
+				.last = 0x42,
+			},
+			{
+				.first = 0x52,
+				.last = 0x52,
+			},
+			{
+				.first = 0x54,
+				.last = 0x57,
+			},
+			{
+				.first = 0x80,
+				.last = 0x83,
+			},
+		},
+	},
+	[AB8500_SYS_CTRL2_BLOCK] = {
+		.num_ranges = 5,
+		.range = (struct ab8500_reg_range[]) {
+			{
+				.first = 0x00,
+				.last = 0x0D,
+			},
+			{
+				.first = 0x0F,
+				.last = 0x17,
+			},
+			{
+				.first = 0x20,
+				.last = 0x20,
+			},
+			{
+				.first = 0x30,
+				.last = 0x30,
+			},
+			{
+				.first = 0x32,
+				.last = 0x3A,
+			},
+		},
+	},
+	[AB8500_REGU_CTRL1] = {
+		.num_ranges = 3,
+		.range = (struct ab8500_reg_range[]) {
+			{
+				.first = 0x00,
+				.last = 0x00,
+			},
+			{
+				.first = 0x03,
+				.last = 0x11,
+			},
+			{
+				.first = 0x80,
+				.last = 0x86,
+			},
+		},
+	},
+	[AB8500_REGU_CTRL2] = {
+		.num_ranges = 6,
+		.range = (struct ab8500_reg_range[]) {
+			{
+				.first = 0x00,
+				.last = 0x06,
+			},
+			{
+				.first = 0x08,
+				.last = 0x15,
+			},
+			{
+				.first = 0x17,
+				.last = 0x19,
+			},
+			{
+				.first = 0x1B,
+				.last = 0x1D,
+			},
+			{
+				.first = 0x1F,
+				.last = 0x30,
+			},
+			{
+				.first = 0x40,
+				.last = 0x48,
+			},
+			/* 0x80-0x8B is SIM registers and should
+			 * not be accessed from here */
+		},
+	},
+	[AB8500_USB] = {
+		.num_ranges = 3,
+		.range = (struct ab8500_reg_range[]) {
+			{
+				.first = 0x80,
+				.last = 0x83,
+			},
+			{
+				.first = 0x87,
+				.last = 0x8A,
+			},
+			{
+				.first = 0x91,
+				.last = 0x94,
+			},
+		},
+	},
+	[AB8500_TVOUT] = {
+		.num_ranges = 0,
+		.range = NULL,
+	},
+	[AB8500_DBI] = {
+		.num_ranges = 0,
+		.range = NULL,
+	},
+	[AB8500_ECI_AV_ACC] = {
+		.num_ranges = 1,
+		.range = (struct ab8500_reg_range[]) {
+			{
+				.first = 0x80,
+				.last = 0x82,
+			},
+		},
+	},
+	[AB8500_RESERVED] = {
+		.num_ranges = 0,
+		.range = NULL,
+	},
+	[AB8500_GPADC] = {
+		.num_ranges = 1,
+		.range = (struct ab8500_reg_range[]) {
+			{
+				.first = 0x00,
+				.last = 0x08,
+			},
+		},
+	},
+	[AB8500_CHARGER] = {
+		.num_ranges = 9,
+		.range = (struct ab8500_reg_range[]) {
+			{
+				.first = 0x02,
+				.last = 0x03,
+			},
+			{
+				.first = 0x05,
+				.last = 0x05,
+			},
+			{
+				.first = 0x40,
+				.last = 0x44,
+			},
+			{
+				.first = 0x50,
+				.last = 0x57,
+			},
+			{
+				.first = 0x60,
+				.last = 0x60,
+			},
+			{
+				.first = 0xA0,
+				.last = 0xA7,
+			},
+			{
+				.first = 0xAF,
+				.last = 0xB2,
+			},
+			{
+				.first = 0xC0,
+				.last = 0xC2,
+			},
+			{
+				.first = 0xF5,
+				.last = 0xF5,
+			},
+		},
+	},
+	[AB8500_GAS_GAUGE] = {
+		.num_ranges = 3,
+		.range = (struct ab8500_reg_range[]) {
+			{
+				.first = 0x00,
+				.last = 0x00,
+			},
+			{
+				.first = 0x07,
+				.last = 0x0A,
+			},
+			{
+				.first = 0x10,
+				.last = 0x14,
+			},
+		},
+	},
+	[AB8500_AUDIO] = {
+		.num_ranges = 1,
+		.range = (struct ab8500_reg_range[]) {
+			{
+				.first = 0x00,
+				.last = 0x83,
+			},
+		},
+	},
+	[AB8500_INTERRUPT] = {
+		.num_ranges = 11,
+		.range = (struct ab8500_reg_range[]) {
+			{
+				.first = 0x00,
+				.last = 0x04,
+			},
+			{
+				.first = 0x06,
+				.last = 0x07,
+			},
+			{
+				.first = 0x09,
+				.last = 0x09,
+			},
+			{
+				.first = 0x0B,
+				.last = 0x0C,
+			},
+			{
+				.first = 0x12,
+				.last = 0x15,
+			},
+			{
+				.first = 0x18,
+				.last = 0x18,
+			},
+			/* Latch registers should not be read here */
+			{
+				.first = 0x40,
+				.last = 0x44,
+			},
+			{
+				.first = 0x46,
+				.last = 0x49,
+			},
+			{
+				.first = 0x4B,
+				.last = 0x4D,
+			},
+			{
+				.first = 0x52,
+				.last = 0x55,
+			},
+			{
+				.first = 0x58,
+				.last = 0x58,
+			},
+			/* LatchHier registers should not be read here */
+		},
+	},
+	[AB8500_RTC] = {
+		.num_ranges = 2,
+		.range = (struct ab8500_reg_range[]) {
+			{
+				.first = 0x00,
+				.last = 0x14,
+			},
+			{
+				.first = 0x16,
+				.last = 0x17,
+			},
+		},
+	},
+	[AB8500_MISC] = {
+		.num_ranges = 8,
+		.range = (struct ab8500_reg_range[]) {
+			{
+				.first = 0x00,
+				.last = 0x06,
+			},
+			{
+				.first = 0x10,
+				.last = 0x16,
+			},
+			{
+				.first = 0x20,
+				.last = 0x26,
+			},
+			{
+				.first = 0x30,
+				.last = 0x36,
+			},
+			{
+				.first = 0x40,
+				.last = 0x46,
+			},
+			{
+				.first = 0x50,
+				.last = 0x50,
+			},
+			{
+				.first = 0x60,
+				.last = 0x6B,
+			},
+			{
+				.first = 0x80,
+				.last = 0x82,
+			},
+		},
+	},
+	[AB8500_DEVELOPMENT] = {
+		.num_ranges = 2,
+		.range = (struct ab8500_reg_range[]) {
+			{
+				.first = 0x00,
+				.last = 0x00,
+			},
+			{
+				.first = 0x05,
+				.last = 0x05,
+			},
+		},
+	},
+	[AB8500_DEBUG] = {
+		.num_ranges = 1,
+		.range = (struct ab8500_reg_range[]) {
+			{
+				.first = 0x05,
+				.last = 0x07,
+			},
+		},
+	},
+	[AB8500_PROD_TEST] = {
+		.num_ranges = 0,
+		.range = NULL,
+	},
+	[AB8500_STE_TEST] = {
+		.num_ranges = 0,
+		.range = NULL,
+	},
+	[AB8500_OTP_EMUL] = {
+		.num_ranges = 1,
+		.range = (struct ab8500_reg_range[]) {
+			{
+				.first = 0x01,
+				.last = 0x15,
+			},
+		},
+	},
+};
+
+struct ab8500_prcmu_ranges ab8540_debug_ranges[AB8500_NUM_BANKS] = {
+	[AB8500_M_FSM_RANK] = {
+		.num_ranges = 1,
+		.range = (struct ab8500_reg_range[]) {
+			{
+				.first = 0x00,
+				.last = 0x0B,
+			},
+		},
+	},
+	[AB8500_SYS_CTRL1_BLOCK] = {
+		.num_ranges = 6,
+		.range = (struct ab8500_reg_range[]) {
+			{
+				.first = 0x00,
+				.last = 0x04,
+			},
+			{
+				.first = 0x42,
+				.last = 0x42,
+			},
+			{
+				.first = 0x50,
+				.last = 0x54,
+			},
+			{
+				.first = 0x57,
+				.last = 0x57,
+			},
+			{
+				.first = 0x80,
+				.last = 0x83,
+			},
+			{
+				.first = 0x90,
+				.last = 0x90,
+			},
+		},
+	},
+	[AB8500_SYS_CTRL2_BLOCK] = {
+		.num_ranges = 5,
+		.range = (struct ab8500_reg_range[]) {
+			{
+				.first = 0x00,
+				.last = 0x0D,
+			},
+			{
+				.first = 0x0F,
+				.last = 0x10,
+			},
+			{
+				.first = 0x20,
+				.last = 0x21,
+			},
+			{
+				.first = 0x32,
+				.last = 0x3C,
+			},
+			{
+				.first = 0x40,
+				.last = 0x42,
+			},
+		},
+	},
+	[AB8500_REGU_CTRL1] = {
+		.num_ranges = 4,
+		.range = (struct ab8500_reg_range[]) {
+			{
+				.first = 0x03,
+				.last = 0x15,
+			},
+			{
+				.first = 0x20,
+				.last = 0x20,
+			},
+			{
+				.first = 0x80,
+				.last = 0x85,
+			},
+			{
+				.first = 0x87,
+				.last = 0x88,
+			},
+		},
+	},
+	[AB8500_REGU_CTRL2] = {
+		.num_ranges = 8,
+		.range = (struct ab8500_reg_range[]) {
+			{
+				.first = 0x00,
+				.last = 0x06,
+			},
+			{
+				.first = 0x08,
+				.last = 0x15,
+			},
+			{
+				.first = 0x17,
+				.last = 0x19,
+			},
+			{
+				.first = 0x1B,
+				.last = 0x1D,
+			},
+			{
+				.first = 0x1F,
+				.last = 0x2F,
+			},
+			{
+				.first = 0x31,
+				.last = 0x3A,
+			},
+			{
+				.first = 0x43,
+				.last = 0x44,
+			},
+			{
+				.first = 0x48,
+				.last = 0x49,
+			},
+		},
+	},
+	[AB8500_USB] = {
+		.num_ranges = 3,
+		.range = (struct ab8500_reg_range[]) {
+			{
+				.first = 0x80,
+				.last = 0x83,
+			},
+			{
+				.first = 0x87,
+				.last = 0x8A,
+			},
+			{
+				.first = 0x91,
+				.last = 0x94,
+			},
+		},
+	},
+	[AB8500_TVOUT] = {
+		.num_ranges = 0,
+		.range = NULL
+	},
+	[AB8500_DBI] = {
+		.num_ranges = 4,
+		.range = (struct ab8500_reg_range[]) {
+			{
+				.first = 0x00,
+				.last = 0x07,
+			},
+			{
+				.first = 0x10,
+				.last = 0x11,
+			},
+			{
+				.first = 0x20,
+				.last = 0x21,
+			},
+			{
+				.first = 0x30,
+				.last = 0x43,
+			},
+		},
+	},
+	[AB8500_ECI_AV_ACC] = {
+		.num_ranges = 2,
+		.range = (struct ab8500_reg_range[]) {
+			{
+				.first = 0x00,
+				.last = 0x03,
+			},
+			{
+				.first = 0x80,
+				.last = 0x82,
+			},
+		},
+	},
+	[AB8500_RESERVED] = {
+		.num_ranges = 0,
+		.range = NULL,
+	},
+	[AB8500_GPADC] = {
+		.num_ranges = 4,
+		.range = (struct ab8500_reg_range[]) {
+			{
+				.first = 0x00,
+				.last = 0x01,
+			},
+			{
+				.first = 0x04,
+				.last = 0x06,
+			},
+			{
+				.first = 0x09,
+				.last = 0x0A,
+			},
+			{
+				.first = 0x10,
+				.last = 0x14,
+			},
+		},
+	},
+	[AB8500_CHARGER] = {
+		.num_ranges = 10,
+		.range = (struct ab8500_reg_range[]) {
+			{
+				.first = 0x00,
+				.last = 0x00,
+			},
+			{
+				.first = 0x02,
+				.last = 0x05,
+			},
+			{
+				.first = 0x40,
+				.last = 0x44,
+			},
+			{
+				.first = 0x50,
+				.last = 0x57,
+			},
+			{
+				.first = 0x60,
+				.last = 0x60,
+			},
+			{
+				.first = 0x70,
+				.last = 0x70,
+			},
+			{
+				.first = 0xA0,
+				.last = 0xA9,
+			},
+			{
+				.first = 0xAF,
+				.last = 0xB2,
+			},
+			{
+				.first = 0xC0,
+				.last = 0xC6,
+			},
+			{
+				.first = 0xF5,
+				.last = 0xF5,
+			},
+		},
+	},
+	[AB8500_GAS_GAUGE] = {
+		.num_ranges = 3,
+		.range = (struct ab8500_reg_range[]) {
+			{
+				.first = 0x00,
+				.last = 0x00,
+			},
+			{
+				.first = 0x07,
+				.last = 0x0A,
+			},
+			{
+				.first = 0x10,
+				.last = 0x14,
+			},
+		},
+	},
+	[AB8500_AUDIO] = {
+		.num_ranges = 1,
+		.range = (struct ab8500_reg_range[]) {
+			{
+				.first = 0x00,
+				.last = 0x9f,
+			},
+		},
+	},
+	[AB8500_INTERRUPT] = {
+		.num_ranges = 6,
+		.range = (struct ab8500_reg_range[]) {
+			{
+				.first = 0x00,
+				.last = 0x05,
+			},
+			{
+				.first = 0x0B,
+				.last = 0x0D,
+			},
+			{
+				.first = 0x12,
+				.last = 0x20,
+			},
+			/* Latch registers should not be read here */
+			{
+				.first = 0x40,
+				.last = 0x45,
+			},
+			{
+				.first = 0x4B,
+				.last = 0x4D,
+			},
+			{
+				.first = 0x52,
+				.last = 0x60,
+			},
+			/* LatchHier registers should not be read here */
+		},
+	},
+	[AB8500_RTC] = {
+		.num_ranges = 3,
+		.range = (struct ab8500_reg_range[]) {
+			{
+				.first = 0x00,
+				.last = 0x07,
+			},
+			{
+				.first = 0x0B,
+				.last = 0x18,
+			},
+			{
+				.first = 0x20,
+				.last = 0x25,
+			},
+		},
+	},
+	[AB8500_MISC] = {
+		.num_ranges = 9,
+		.range = (struct ab8500_reg_range[]) {
+			{
+				.first = 0x00,
+				.last = 0x06,
+			},
+			{
+				.first = 0x10,
+				.last = 0x16,
+			},
+			{
+				.first = 0x20,
+				.last = 0x26,
+			},
+			{
+				.first = 0x30,
+				.last = 0x36,
+			},
+			{
+				.first = 0x40,
+				.last = 0x49,
+			},
+			{
+				.first = 0x50,
+				.last = 0x50,
+			},
+			{
+				.first = 0x60,
+				.last = 0x6B,
+			},
+			{
+				.first = 0x70,
+				.last = 0x74,
+			},
+			{
+				.first = 0x80,
+				.last = 0x82,
+			},
+		},
+	},
+	[AB8500_DEVELOPMENT] = {
+		.num_ranges = 3,
+		.range = (struct ab8500_reg_range[]) {
+			{
+				.first = 0x00,
+				.last = 0x01,
+			},
+			{
+				.first = 0x06,
+				.last = 0x06,
+			},
+			{
+				.first = 0x10,
+				.last = 0x21,
+			},
+		},
+	},
+	[AB8500_DEBUG] = {
+		.num_ranges = 3,
+		.range = (struct ab8500_reg_range[]) {
+			{
+				.first = 0x01,
+				.last = 0x0C,
+			},
+			{
+				.first = 0x0E,
+				.last = 0x11,
+			},
+			{
+				.first = 0x80,
+				.last = 0x81,
+			},
+		},
+	},
+	[AB8500_PROD_TEST] = {
+		.num_ranges = 0,
+		.range = NULL,
+	},
+	[AB8500_STE_TEST] = {
+		.num_ranges = 0,
+		.range = NULL,
+	},
+	[AB8500_OTP_EMUL] = {
+		.num_ranges = 1,
+		.range = (struct ab8500_reg_range[]) {
+			{
+				.first = 0x00,
+				.last = 0x3F,
+			},
+		},
+	},
+};
+
+
 static irqreturn_t ab8500_debug_handler(int irq, void *data)
 {
 	char buf[16];
@@ -520,19 +1306,16 @@ static int ab8500_registers_print(struct device *dev, u32 bank,
 			}
 
 			if (s) {
-				err = seq_printf(s, "  [%u/0x%02X]: 0x%02X\n",
+				err = seq_printf(s, "  [0x%02X/0x%02X]: 0x%02X\n",
 					bank, reg, value);
 				if (err < 0) {
-					dev_err(dev,
-					"seq_printf overflow bank=%d reg=%d\n",
-						bank, reg);
 					/* Error is not returned here since
 					 * the output is wanted in any case */
 					return 0;
 				}
 			} else {
-				printk(KERN_INFO" [%u/0x%02X]: 0x%02X\n", bank,
-					reg, value);
+				printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n",
+					bank, reg, value);
 			}
 		}
 	}
@@ -546,7 +1329,7 @@ static int ab8500_print_bank_registers(struct seq_file *s, void *p)
 
 	seq_printf(s, AB8500_NAME_STRING " register values:\n");
 
-	seq_printf(s, " bank %u:\n", bank);
+	seq_printf(s, " bank 0x%02X:\n", bank);
 
 	ab8500_registers_print(dev, bank, s);
 	return 0;
@@ -573,10 +1356,8 @@ static int ab8500_print_all_banks(struct seq_file *s, void *p)
 
 	seq_printf(s, AB8500_NAME_STRING " register values:\n");
 
-	for (i = 1; i < AB8500_NUM_BANKS; i++) {
-		err = seq_printf(s, " bank %u:\n", i);
-		if (err < 0)
-			dev_err(dev, "seq_printf overflow, bank=%d\n", i);
+	for (i = 0; i < AB8500_NUM_BANKS; i++) {
+		err = seq_printf(s, " bank 0x%02X:\n", i);
 
 		ab8500_registers_print(dev, i, s);
 	}
@@ -591,11 +1372,68 @@ void ab8500_dump_all_banks(struct device *dev)
 	printk(KERN_INFO"ab8500 register values:\n");
 
 	for (i = 1; i < AB8500_NUM_BANKS; i++) {
-		printk(KERN_INFO" bank %u:\n", i);
+		printk(KERN_INFO" bank 0x%02X:\n", i);
 		ab8500_registers_print(dev, i, NULL);
 	}
 }
 
+/* Space for 500 registers. */
+#define DUMP_MAX_REGS 700
+struct ab8500_register_dump
+{
+	u8 bank;
+	u8 reg;
+	u8 value;
+} ab8500_complete_register_dump[DUMP_MAX_REGS];
+
+extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size);
+
+/* This shall only be called upon kernel panic! */
+void ab8500_dump_all_banks_to_mem(void)
+{
+	int i, r = 0;
+	u8 bank;
+	int err = 0;
+
+	pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" "
+		"for crash analyze.\n");
+
+	for (bank = 0; bank < AB8500_NUM_BANKS; bank++) {
+		for (i = 0; i < debug_ranges[bank].num_ranges; i++) {
+			u8 reg;
+
+			for (reg = debug_ranges[bank].range[i].first;
+			     reg <= debug_ranges[bank].range[i].last;
+			     reg++) {
+				u8 value;
+
+				err = prcmu_abb_read(bank, reg, &value, 1);
+
+				if (err < 0)
+					goto out;
+
+				ab8500_complete_register_dump[r].bank = bank;
+				ab8500_complete_register_dump[r].reg = reg;
+				ab8500_complete_register_dump[r].value = value;
+
+				r++;
+
+				if (r >= DUMP_MAX_REGS) {
+					pr_err("%s: too many register to dump!\n",
+						__func__);
+					err = -EINVAL;
+					goto out;
+				}
+			}
+		}
+	}
+out:
+	if (err >= 0)
+		pr_info("Saved all ABB registers.\n");
+	else
+		pr_info("Failed to save all ABB registers.\n");
+}
+
 static int ab8500_all_banks_open(struct inode *inode, struct file *file)
 {
 	struct seq_file *s;
@@ -625,7 +1463,7 @@ static const struct file_operations ab8500_all_banks_fops = {
 
 static int ab8500_bank_print(struct seq_file *s, void *p)
 {
-	return seq_printf(s, "%d\n", debug_bank);
+	return seq_printf(s, "0x%02X\n", debug_bank);
 }
 
 static int ab8500_bank_open(struct inode *inode, struct file *file)
@@ -641,7 +1479,6 @@ static ssize_t ab8500_bank_write(struct file *file,
 	unsigned long user_bank;
 	int err;
 
-	/* Get userspace string and assure termination */
 	err = kstrtoul_from_user(user_buf, count, 0, &user_bank);
 	if (err)
 		return err;
@@ -667,14 +1504,13 @@ static int ab8500_address_open(struct inode *inode, struct file *file)
 }
 
 static ssize_t ab8500_address_write(struct file *file,
-	const char __user *user_buf,
-	size_t count, loff_t *ppos)
+				    const char __user *user_buf,
+				    size_t count, loff_t *ppos)
 {
 	struct device *dev = ((struct seq_file *)(file->private_data))->private;
 	unsigned long user_address;
 	int err;
 
-	/* Get userspace string and assure termination */
 	err = kstrtoul_from_user(user_buf, count, 0, &user_address);
 	if (err)
 		return err;
@@ -684,6 +1520,7 @@ static ssize_t ab8500_address_write(struct file *file,
 		return -EINVAL;
 	}
 	debug_address = user_address;
+
 	return count;
 }
 
@@ -711,14 +1548,13 @@ static int ab8500_val_open(struct inode *inode, struct file *file)
 }
 
 static ssize_t ab8500_val_write(struct file *file,
-	const char __user *user_buf,
-	size_t count, loff_t *ppos)
+				const char __user *user_buf,
+				size_t count, loff_t *ppos)
 {
 	struct device *dev = ((struct seq_file *)(file->private_data))->private;
 	unsigned long user_val;
 	int err;
 
-	/* Get userspace string and assure termination */
 	err = kstrtoul_from_user(user_buf, count, 0, &user_val);
 	if (err)
 		return err;
@@ -741,22 +1577,46 @@ static ssize_t ab8500_val_write(struct file *file,
  * Interrupt status
  */
 static u32 num_interrupts[AB8500_MAX_NR_IRQS];
+static u32 num_wake_interrupts[AB8500_MAX_NR_IRQS];
 static int num_interrupt_lines;
 
+bool __attribute__((weak)) suspend_test_wake_cause_interrupt_is_mine(u32 my_int)
+{
+	return false;
+}
+
 void ab8500_debug_register_interrupt(int line)
 {
-	if (line < num_interrupt_lines)
+	if (line < num_interrupt_lines) {
 		num_interrupts[line]++;
+		if (suspend_test_wake_cause_interrupt_is_mine(IRQ_DB8500_AB8500))
+			num_wake_interrupts[line]++;
+	}
 }
 
 static int ab8500_interrupts_print(struct seq_file *s, void *p)
 {
 	int line;
 
-	seq_printf(s, "irq:  number of\n");
+	seq_printf(s, "name: number:  number of: wake:\n");
 
-	for (line = 0; line < num_interrupt_lines; line++)
-		seq_printf(s, "%3i:  %6i\n", line, num_interrupts[line]);
+	for (line = 0; line < num_interrupt_lines; line++) {
+		struct irq_desc *desc = irq_to_desc(line + irq_first);
+		struct irqaction *action = desc->action;
+
+		seq_printf(s, "%3i:  %6i %4i", line,
+			   num_interrupts[line],
+			   num_wake_interrupts[line]);
+
+		if (desc && desc->name)
+			seq_printf(s, "-%-8s", desc->name);
+		if (action) {
+			seq_printf(s, "  %s", action->name);
+			while ((action = action->next) != NULL)
+				seq_printf(s, ", %s", action->name);
+		}
+		seq_putc(s, '\n');
+	}
 
 	return 0;
 }
@@ -801,6 +1661,79 @@ static int ab8500_hwreg_open(struct inode *inode, struct file *file)
 	return single_open(file, ab8500_hwreg_print, inode->i_private);
 }
 
+#define AB8500_SUPPLY_CONTROL_CONFIG_1 0x01
+#define AB8500_SUPPLY_CONTROL_REG 0x00
+#define AB8500_FIRST_SIM_REG 0x80
+#define AB8500_LAST_SIM_REG 0x8B
+#define AB8505_LAST_SIM_REG 0x8C
+
+static int ab8500_print_modem_registers(struct seq_file *s, void *p)
+{
+	struct device *dev = s->private;
+	struct ab8500 *ab8500;
+	int err;
+	u8 value;
+	u8 orig_value;
+	u32 bank = AB8500_REGU_CTRL2;
+	u32 last_sim_reg = AB8500_LAST_SIM_REG;
+	u32 reg;
+
+	ab8500 = dev_get_drvdata(dev->parent);
+	dev_warn(dev, "WARNING! This operation can interfer with modem side\n"
+		"and should only be done with care\n");
+
+	err = abx500_get_register_interruptible(dev,
+		AB8500_REGU_CTRL1, AB8500_SUPPLY_CONTROL_REG, &orig_value);
+	if (err < 0) {
+		dev_err(dev, "ab->read fail %d\n", err);
+		return err;
+	}
+	/* Config 1 will allow APE side to read SIM registers */
+	err = abx500_set_register_interruptible(dev,
+		AB8500_REGU_CTRL1, AB8500_SUPPLY_CONTROL_REG,
+		AB8500_SUPPLY_CONTROL_CONFIG_1);
+	if (err < 0) {
+		dev_err(dev, "ab->write fail %d\n", err);
+		return err;
+	}
+
+	seq_printf(s, " bank 0x%02X:\n", bank);
+
+	if (is_ab9540(ab8500) || is_ab8505(ab8500))
+		last_sim_reg = AB8505_LAST_SIM_REG;
+
+	for (reg = AB8500_FIRST_SIM_REG; reg <= last_sim_reg; reg++) {
+		err = abx500_get_register_interruptible(dev,
+			bank, reg, &value);
+		if (err < 0) {
+			dev_err(dev, "ab->read fail %d\n", err);
+			return err;
+		}
+		err = seq_printf(s, "  [0x%02X/0x%02X]: 0x%02X\n",
+			bank, reg, value);
+	}
+	err = abx500_set_register_interruptible(dev,
+		AB8500_REGU_CTRL1, AB8500_SUPPLY_CONTROL_REG, orig_value);
+	if (err < 0) {
+		dev_err(dev, "ab->write fail %d\n", err);
+		return err;
+	}
+	return 0;
+}
+
+static int ab8500_modem_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, ab8500_print_modem_registers, inode->i_private);
+}
+
+static const struct file_operations ab8500_modem_fops = {
+	.open = ab8500_modem_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+	.owner = THIS_MODULE,
+};
+
 static int ab8500_gpadc_bat_ctrl_print(struct seq_file *s, void *p)
 {
 	int bat_ctrl_raw;
@@ -808,12 +1741,13 @@ static int ab8500_gpadc_bat_ctrl_print(struct seq_file *s, void *p)
 	struct ab8500_gpadc *gpadc;
 
 	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	bat_ctrl_raw = ab8500_gpadc_read_raw(gpadc, BAT_CTRL);
+	bat_ctrl_raw = ab8500_gpadc_read_raw(gpadc, BAT_CTRL,
+		avg_sample, trig_edge, trig_timer, conv_type);
 	bat_ctrl_convert = ab8500_gpadc_ad_to_voltage(gpadc,
-			BAT_CTRL, bat_ctrl_raw);
+		BAT_CTRL, bat_ctrl_raw);
 
 	return seq_printf(s, "%d,0x%X\n",
-			bat_ctrl_convert, bat_ctrl_raw);
+		bat_ctrl_convert, bat_ctrl_raw);
 }
 
 static int ab8500_gpadc_bat_ctrl_open(struct inode *inode, struct file *file)
@@ -836,16 +1770,17 @@ static int ab8500_gpadc_btemp_ball_print(struct seq_file *s, void *p)
 	struct ab8500_gpadc *gpadc;
 
 	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	btemp_ball_raw = ab8500_gpadc_read_raw(gpadc, BTEMP_BALL);
+	btemp_ball_raw = ab8500_gpadc_read_raw(gpadc, BTEMP_BALL,
+		avg_sample, trig_edge, trig_timer, conv_type);
 	btemp_ball_convert = ab8500_gpadc_ad_to_voltage(gpadc, BTEMP_BALL,
-			btemp_ball_raw);
+		btemp_ball_raw);
 
 	return seq_printf(s,
-			"%d,0x%X\n", btemp_ball_convert, btemp_ball_raw);
+		"%d,0x%X\n", btemp_ball_convert, btemp_ball_raw);
 }
 
 static int ab8500_gpadc_btemp_ball_open(struct inode *inode,
-		struct file *file)
+					struct file *file)
 {
 	return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private);
 }
@@ -865,19 +1800,20 @@ static int ab8500_gpadc_main_charger_v_print(struct seq_file *s, void *p)
 	struct ab8500_gpadc *gpadc;
 
 	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	main_charger_v_raw = ab8500_gpadc_read_raw(gpadc, MAIN_CHARGER_V);
+	main_charger_v_raw = ab8500_gpadc_read_raw(gpadc, MAIN_CHARGER_V,
+		avg_sample, trig_edge, trig_timer, conv_type);
 	main_charger_v_convert = ab8500_gpadc_ad_to_voltage(gpadc,
-			MAIN_CHARGER_V, main_charger_v_raw);
+		MAIN_CHARGER_V, main_charger_v_raw);
 
 	return seq_printf(s, "%d,0x%X\n",
 			main_charger_v_convert, main_charger_v_raw);
 }
 
 static int ab8500_gpadc_main_charger_v_open(struct inode *inode,
-		struct file *file)
+					    struct file *file)
 {
 	return single_open(file, ab8500_gpadc_main_charger_v_print,
-			inode->i_private);
+		inode->i_private);
 }
 
 static const struct file_operations ab8500_gpadc_main_charger_v_fops = {
@@ -895,19 +1831,20 @@ static int ab8500_gpadc_acc_detect1_print(struct seq_file *s, void *p)
 	struct ab8500_gpadc *gpadc;
 
 	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	acc_detect1_raw = ab8500_gpadc_read_raw(gpadc, ACC_DETECT1);
+	acc_detect1_raw = ab8500_gpadc_read_raw(gpadc, ACC_DETECT1,
+		avg_sample, trig_edge, trig_timer, conv_type);
 	acc_detect1_convert = ab8500_gpadc_ad_to_voltage(gpadc, ACC_DETECT1,
-			acc_detect1_raw);
+		acc_detect1_raw);
 
 	return seq_printf(s, "%d,0x%X\n",
-			acc_detect1_convert, acc_detect1_raw);
+		acc_detect1_convert, acc_detect1_raw);
 }
 
 static int ab8500_gpadc_acc_detect1_open(struct inode *inode,
-		struct file *file)
+					 struct file *file)
 {
 	return single_open(file, ab8500_gpadc_acc_detect1_print,
-			inode->i_private);
+		inode->i_private);
 }
 
 static const struct file_operations ab8500_gpadc_acc_detect1_fops = {
@@ -925,19 +1862,20 @@ static int ab8500_gpadc_acc_detect2_print(struct seq_file *s, void *p)
 	struct ab8500_gpadc *gpadc;
 
 	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	acc_detect2_raw = ab8500_gpadc_read_raw(gpadc, ACC_DETECT2);
+	acc_detect2_raw = ab8500_gpadc_read_raw(gpadc, ACC_DETECT2,
+		avg_sample, trig_edge, trig_timer, conv_type);
 	acc_detect2_convert = ab8500_gpadc_ad_to_voltage(gpadc,
-	    ACC_DETECT2, acc_detect2_raw);
+		ACC_DETECT2, acc_detect2_raw);
 
 	return seq_printf(s, "%d,0x%X\n",
-			acc_detect2_convert, acc_detect2_raw);
+		acc_detect2_convert, acc_detect2_raw);
 }
 
 static int ab8500_gpadc_acc_detect2_open(struct inode *inode,
 		struct file *file)
 {
 	return single_open(file, ab8500_gpadc_acc_detect2_print,
-	    inode->i_private);
+		inode->i_private);
 }
 
 static const struct file_operations ab8500_gpadc_acc_detect2_fops = {
@@ -955,12 +1893,13 @@ static int ab8500_gpadc_aux1_print(struct seq_file *s, void *p)
 	struct ab8500_gpadc *gpadc;
 
 	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	aux1_raw = ab8500_gpadc_read_raw(gpadc, ADC_AUX1);
+	aux1_raw = ab8500_gpadc_read_raw(gpadc, ADC_AUX1,
+		avg_sample, trig_edge, trig_timer, conv_type);
 	aux1_convert = ab8500_gpadc_ad_to_voltage(gpadc, ADC_AUX1,
-			aux1_raw);
+		aux1_raw);
 
 	return seq_printf(s, "%d,0x%X\n",
-			aux1_convert, aux1_raw);
+		aux1_convert, aux1_raw);
 }
 
 static int ab8500_gpadc_aux1_open(struct inode *inode, struct file *file)
@@ -983,9 +1922,10 @@ static int ab8500_gpadc_aux2_print(struct seq_file *s, void *p)
 	struct ab8500_gpadc *gpadc;
 
 	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	aux2_raw = ab8500_gpadc_read_raw(gpadc, ADC_AUX2);
+	aux2_raw = ab8500_gpadc_read_raw(gpadc, ADC_AUX2,
+		avg_sample, trig_edge, trig_timer, conv_type);
 	aux2_convert = ab8500_gpadc_ad_to_voltage(gpadc, ADC_AUX2,
-			aux2_raw);
+		aux2_raw);
 
 	return seq_printf(s, "%d,0x%X\n",
 			aux2_convert, aux2_raw);
@@ -1011,16 +1951,17 @@ static int ab8500_gpadc_main_bat_v_print(struct seq_file *s, void *p)
 	struct ab8500_gpadc *gpadc;
 
 	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	main_bat_v_raw = ab8500_gpadc_read_raw(gpadc, MAIN_BAT_V);
+	main_bat_v_raw = ab8500_gpadc_read_raw(gpadc, MAIN_BAT_V,
+		avg_sample, trig_edge, trig_timer, conv_type);
 	main_bat_v_convert = ab8500_gpadc_ad_to_voltage(gpadc, MAIN_BAT_V,
-			main_bat_v_raw);
+		main_bat_v_raw);
 
 	return seq_printf(s, "%d,0x%X\n",
-			main_bat_v_convert, main_bat_v_raw);
+		main_bat_v_convert, main_bat_v_raw);
 }
 
 static int ab8500_gpadc_main_bat_v_open(struct inode *inode,
-		struct file *file)
+					struct file *file)
 {
 	return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private);
 }
@@ -1040,12 +1981,13 @@ static int ab8500_gpadc_vbus_v_print(struct seq_file *s, void *p)
 	struct ab8500_gpadc *gpadc;
 
 	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	vbus_v_raw = ab8500_gpadc_read_raw(gpadc, VBUS_V);
+	vbus_v_raw =  ab8500_gpadc_read_raw(gpadc, VBUS_V,
+		avg_sample, trig_edge, trig_timer, conv_type);
 	vbus_v_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBUS_V,
-			vbus_v_raw);
+		vbus_v_raw);
 
 	return seq_printf(s, "%d,0x%X\n",
-			vbus_v_convert, vbus_v_raw);
+		vbus_v_convert, vbus_v_raw);
 }
 
 static int ab8500_gpadc_vbus_v_open(struct inode *inode, struct file *file)
@@ -1068,19 +2010,20 @@ static int ab8500_gpadc_main_charger_c_print(struct seq_file *s, void *p)
 	struct ab8500_gpadc *gpadc;
 
 	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	main_charger_c_raw = ab8500_gpadc_read_raw(gpadc, MAIN_CHARGER_C);
+	main_charger_c_raw = ab8500_gpadc_read_raw(gpadc, MAIN_CHARGER_C,
+		avg_sample, trig_edge, trig_timer, conv_type);
 	main_charger_c_convert = ab8500_gpadc_ad_to_voltage(gpadc,
-			MAIN_CHARGER_C, main_charger_c_raw);
+		MAIN_CHARGER_C, main_charger_c_raw);
 
 	return seq_printf(s, "%d,0x%X\n",
-			main_charger_c_convert, main_charger_c_raw);
+		main_charger_c_convert, main_charger_c_raw);
 }
 
 static int ab8500_gpadc_main_charger_c_open(struct inode *inode,
 		struct file *file)
 {
 	return single_open(file, ab8500_gpadc_main_charger_c_print,
-			inode->i_private);
+		inode->i_private);
 }
 
 static const struct file_operations ab8500_gpadc_main_charger_c_fops = {
@@ -1098,19 +2041,20 @@ static int ab8500_gpadc_usb_charger_c_print(struct seq_file *s, void *p)
 	struct ab8500_gpadc *gpadc;
 
 	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	usb_charger_c_raw = ab8500_gpadc_read_raw(gpadc, USB_CHARGER_C);
+	usb_charger_c_raw = ab8500_gpadc_read_raw(gpadc, USB_CHARGER_C,
+		avg_sample, trig_edge, trig_timer, conv_type);
 	usb_charger_c_convert = ab8500_gpadc_ad_to_voltage(gpadc,
-	    USB_CHARGER_C, usb_charger_c_raw);
+		USB_CHARGER_C, usb_charger_c_raw);
 
 	return seq_printf(s, "%d,0x%X\n",
-			usb_charger_c_convert, usb_charger_c_raw);
+		usb_charger_c_convert, usb_charger_c_raw);
 }
 
 static int ab8500_gpadc_usb_charger_c_open(struct inode *inode,
 		struct file *file)
 {
 	return single_open(file, ab8500_gpadc_usb_charger_c_print,
-	    inode->i_private);
+		inode->i_private);
 }
 
 static const struct file_operations ab8500_gpadc_usb_charger_c_fops = {
@@ -1128,12 +2072,13 @@ static int ab8500_gpadc_bk_bat_v_print(struct seq_file *s, void *p)
 	struct ab8500_gpadc *gpadc;
 
 	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	bk_bat_v_raw = ab8500_gpadc_read_raw(gpadc, BK_BAT_V);
+	bk_bat_v_raw = ab8500_gpadc_read_raw(gpadc, BK_BAT_V,
+		avg_sample, trig_edge, trig_timer, conv_type);
 	bk_bat_v_convert = ab8500_gpadc_ad_to_voltage(gpadc,
-			BK_BAT_V, bk_bat_v_raw);
+		BK_BAT_V, bk_bat_v_raw);
 
 	return seq_printf(s, "%d,0x%X\n",
-			bk_bat_v_convert, bk_bat_v_raw);
+		bk_bat_v_convert, bk_bat_v_raw);
 }
 
 static int ab8500_gpadc_bk_bat_v_open(struct inode *inode, struct file *file)
@@ -1156,12 +2101,13 @@ static int ab8500_gpadc_die_temp_print(struct seq_file *s, void *p)
 	struct ab8500_gpadc *gpadc;
 
 	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
-	die_temp_raw = ab8500_gpadc_read_raw(gpadc, DIE_TEMP);
+	die_temp_raw = ab8500_gpadc_read_raw(gpadc, DIE_TEMP,
+		avg_sample, trig_edge, trig_timer, conv_type);
 	die_temp_convert = ab8500_gpadc_ad_to_voltage(gpadc, DIE_TEMP,
-			die_temp_raw);
+		die_temp_raw);
 
 	return seq_printf(s, "%d,0x%X\n",
-			die_temp_convert, die_temp_raw);
+		die_temp_convert, die_temp_raw);
 }
 
 static int ab8500_gpadc_die_temp_open(struct inode *inode, struct file *file)
@@ -1177,6 +2123,453 @@ static const struct file_operations ab8500_gpadc_die_temp_fops = {
 	.owner = THIS_MODULE,
 };
 
+static int ab8500_gpadc_usb_id_print(struct seq_file *s, void *p)
+{
+	int usb_id_raw;
+	int usb_id_convert;
+	struct ab8500_gpadc *gpadc;
+
+	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
+	usb_id_raw = ab8500_gpadc_read_raw(gpadc, USB_ID,
+		avg_sample, trig_edge, trig_timer, conv_type);
+	usb_id_convert = ab8500_gpadc_ad_to_voltage(gpadc, USB_ID,
+		usb_id_raw);
+
+	return seq_printf(s, "%d,0x%X\n",
+		usb_id_convert, usb_id_raw);
+}
+
+static int ab8500_gpadc_usb_id_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, ab8500_gpadc_usb_id_print, inode->i_private);
+}
+
+static const struct file_operations ab8500_gpadc_usb_id_fops = {
+	.open = ab8500_gpadc_usb_id_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+	.owner = THIS_MODULE,
+};
+
+static int ab8540_gpadc_xtal_temp_print(struct seq_file *s, void *p)
+{
+	int xtal_temp_raw;
+	int xtal_temp_convert;
+	struct ab8500_gpadc *gpadc;
+
+	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
+	xtal_temp_raw = ab8500_gpadc_read_raw(gpadc, XTAL_TEMP,
+		avg_sample, trig_edge, trig_timer, conv_type);
+	xtal_temp_convert = ab8500_gpadc_ad_to_voltage(gpadc, XTAL_TEMP,
+		xtal_temp_raw);
+
+	return seq_printf(s, "%d,0x%X\n",
+		xtal_temp_convert, xtal_temp_raw);
+}
+
+static int ab8540_gpadc_xtal_temp_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, ab8540_gpadc_xtal_temp_print,
+		inode->i_private);
+}
+
+static const struct file_operations ab8540_gpadc_xtal_temp_fops = {
+	.open = ab8540_gpadc_xtal_temp_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+	.owner = THIS_MODULE,
+};
+
+static int ab8540_gpadc_vbat_true_meas_print(struct seq_file *s, void *p)
+{
+	int vbat_true_meas_raw;
+	int vbat_true_meas_convert;
+	struct ab8500_gpadc *gpadc;
+
+	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
+	vbat_true_meas_raw = ab8500_gpadc_read_raw(gpadc, VBAT_TRUE_MEAS,
+		avg_sample, trig_edge, trig_timer, conv_type);
+	vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS,
+		vbat_true_meas_raw);
+
+	return seq_printf(s, "%d,0x%X\n",
+		vbat_true_meas_convert, vbat_true_meas_raw);
+}
+
+static int ab8540_gpadc_vbat_true_meas_open(struct inode *inode,
+		struct file *file)
+{
+	return single_open(file, ab8540_gpadc_vbat_true_meas_print,
+		inode->i_private);
+}
+
+static const struct file_operations ab8540_gpadc_vbat_true_meas_fops = {
+	.open = ab8540_gpadc_vbat_true_meas_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+	.owner = THIS_MODULE,
+};
+
+static int ab8540_gpadc_bat_ctrl_and_ibat_print(struct seq_file *s, void *p)
+{
+	int bat_ctrl_raw;
+	int bat_ctrl_convert;
+	int ibat_raw;
+	int ibat_convert;
+	struct ab8500_gpadc *gpadc;
+
+	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
+	bat_ctrl_raw = ab8500_gpadc_double_read_raw(gpadc, BAT_CTRL_AND_IBAT,
+		avg_sample, trig_edge, trig_timer, conv_type, &ibat_raw);
+
+	bat_ctrl_convert = ab8500_gpadc_ad_to_voltage(gpadc, BAT_CTRL,
+		bat_ctrl_raw);
+	ibat_convert = ab8500_gpadc_ad_to_voltage(gpadc, IBAT_VIRTUAL_CHANNEL,
+		ibat_raw);
+
+	return seq_printf(s, "%d,0x%X\n"  "%d,0x%X\n",
+		bat_ctrl_convert, bat_ctrl_raw,
+		ibat_convert, ibat_raw);
+}
+
+static int ab8540_gpadc_bat_ctrl_and_ibat_open(struct inode *inode,
+		struct file *file)
+{
+	return single_open(file, ab8540_gpadc_bat_ctrl_and_ibat_print,
+		inode->i_private);
+}
+
+static const struct file_operations ab8540_gpadc_bat_ctrl_and_ibat_fops = {
+	.open = ab8540_gpadc_bat_ctrl_and_ibat_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+	.owner = THIS_MODULE,
+};
+
+static int ab8540_gpadc_vbat_meas_and_ibat_print(struct seq_file *s, void *p)
+{
+	int vbat_meas_raw;
+	int vbat_meas_convert;
+	int ibat_raw;
+	int ibat_convert;
+	struct ab8500_gpadc *gpadc;
+
+	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
+	vbat_meas_raw = ab8500_gpadc_double_read_raw(gpadc, VBAT_MEAS_AND_IBAT,
+		avg_sample, trig_edge, trig_timer, conv_type, &ibat_raw);
+	vbat_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, MAIN_BAT_V,
+		vbat_meas_raw);
+	ibat_convert = ab8500_gpadc_ad_to_voltage(gpadc, IBAT_VIRTUAL_CHANNEL,
+		ibat_raw);
+
+	return seq_printf(s, "%d,0x%X\n"  "%d,0x%X\n",
+		vbat_meas_convert, vbat_meas_raw,
+		ibat_convert, ibat_raw);
+}
+
+static int ab8540_gpadc_vbat_meas_and_ibat_open(struct inode *inode,
+		struct file *file)
+{
+	return single_open(file, ab8540_gpadc_vbat_meas_and_ibat_print,
+		inode->i_private);
+}
+
+static const struct file_operations ab8540_gpadc_vbat_meas_and_ibat_fops = {
+	.open = ab8540_gpadc_vbat_meas_and_ibat_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+	.owner = THIS_MODULE,
+};
+
+static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p)
+{
+	int vbat_true_meas_raw;
+	int vbat_true_meas_convert;
+	int ibat_raw;
+	int ibat_convert;
+	struct ab8500_gpadc *gpadc;
+
+	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
+	vbat_true_meas_raw = ab8500_gpadc_double_read_raw(gpadc,
+			VBAT_TRUE_MEAS_AND_IBAT, avg_sample, trig_edge,
+			trig_timer, conv_type, &ibat_raw);
+	vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc,
+			VBAT_TRUE_MEAS, vbat_true_meas_raw);
+	ibat_convert = ab8500_gpadc_ad_to_voltage(gpadc, IBAT_VIRTUAL_CHANNEL,
+		ibat_raw);
+
+	return seq_printf(s, "%d,0x%X\n"  "%d,0x%X\n",
+		vbat_true_meas_convert, vbat_true_meas_raw,
+		ibat_convert, ibat_raw);
+}
+
+static int ab8540_gpadc_vbat_true_meas_and_ibat_open(struct inode *inode,
+		struct file *file)
+{
+	return single_open(file, ab8540_gpadc_vbat_true_meas_and_ibat_print,
+		inode->i_private);
+}
+
+static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = {
+	.open = ab8540_gpadc_vbat_true_meas_and_ibat_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+	.owner = THIS_MODULE,
+};
+
+static int ab8540_gpadc_bat_temp_and_ibat_print(struct seq_file *s, void *p)
+{
+	int bat_temp_raw;
+	int bat_temp_convert;
+	int ibat_raw;
+	int ibat_convert;
+	struct ab8500_gpadc *gpadc;
+
+	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
+	bat_temp_raw = ab8500_gpadc_double_read_raw(gpadc, BAT_TEMP_AND_IBAT,
+		avg_sample, trig_edge, trig_timer, conv_type, &ibat_raw);
+	bat_temp_convert = ab8500_gpadc_ad_to_voltage(gpadc, BTEMP_BALL,
+		bat_temp_raw);
+	ibat_convert = ab8500_gpadc_ad_to_voltage(gpadc, IBAT_VIRTUAL_CHANNEL,
+		ibat_raw);
+
+	return seq_printf(s, "%d,0x%X\n"  "%d,0x%X\n",
+		bat_temp_convert, bat_temp_raw,
+		ibat_convert, ibat_raw);
+}
+
+static int ab8540_gpadc_bat_temp_and_ibat_open(struct inode *inode,
+		struct file *file)
+{
+	return single_open(file, ab8540_gpadc_bat_temp_and_ibat_print,
+		inode->i_private);
+}
+
+static const struct file_operations ab8540_gpadc_bat_temp_and_ibat_fops = {
+	.open = ab8540_gpadc_bat_temp_and_ibat_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+	.owner = THIS_MODULE,
+};
+
+static int ab8540_gpadc_otp_cal_print(struct seq_file *s, void *p)
+{
+	struct ab8500_gpadc *gpadc;
+	u16 vmain_l, vmain_h, btemp_l, btemp_h;
+	u16 vbat_l, vbat_h, ibat_l, ibat_h;
+
+	gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
+	ab8540_gpadc_get_otp(gpadc, &vmain_l, &vmain_h, &btemp_l, &btemp_h,
+			&vbat_l, &vbat_h, &ibat_l, &ibat_h);
+	return seq_printf(s, "VMAIN_L:0x%X\n"
+		"VMAIN_H:0x%X\n"
+		"BTEMP_L:0x%X\n"
+		"BTEMP_H:0x%X\n"
+		"VBAT_L:0x%X\n"
+		"VBAT_H:0x%X\n"
+		"IBAT_L:0x%X\n"
+		"IBAT_H:0x%X\n",
+		vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h);
+}
+
+static int ab8540_gpadc_otp_cal_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, ab8540_gpadc_otp_cal_print, inode->i_private);
+}
+
+static const struct file_operations ab8540_gpadc_otp_calib_fops = {
+	.open = ab8540_gpadc_otp_cal_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+	.owner = THIS_MODULE,
+};
+
+static int ab8500_gpadc_avg_sample_print(struct seq_file *s, void *p)
+{
+	return seq_printf(s, "%d\n", avg_sample);
+}
+
+static int ab8500_gpadc_avg_sample_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, ab8500_gpadc_avg_sample_print,
+		inode->i_private);
+}
+
+static ssize_t ab8500_gpadc_avg_sample_write(struct file *file,
+	const char __user *user_buf,
+	size_t count, loff_t *ppos)
+{
+	struct device *dev = ((struct seq_file *)(file->private_data))->private;
+	unsigned long user_avg_sample;
+	int err;
+
+	err = kstrtoul_from_user(user_buf, count, 0, &user_avg_sample);
+	if (err)
+		return err;
+
+	if ((user_avg_sample == SAMPLE_1) || (user_avg_sample == SAMPLE_4)
+			|| (user_avg_sample == SAMPLE_8)
+			|| (user_avg_sample == SAMPLE_16)) {
+		avg_sample = (u8) user_avg_sample;
+	} else {
+		dev_err(dev, "debugfs error input: "
+			"should be egal to 1, 4, 8 or 16\n");
+		return -EINVAL;
+	}
+
+	return count;
+}
+
+static const struct file_operations ab8500_gpadc_avg_sample_fops = {
+	.open = ab8500_gpadc_avg_sample_open,
+	.read = seq_read,
+	.write = ab8500_gpadc_avg_sample_write,
+	.llseek = seq_lseek,
+	.release = single_release,
+	.owner = THIS_MODULE,
+};
+
+static int ab8500_gpadc_trig_edge_print(struct seq_file *s, void *p)
+{
+	return seq_printf(s, "%d\n", trig_edge);
+}
+
+static int ab8500_gpadc_trig_edge_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, ab8500_gpadc_trig_edge_print,
+		inode->i_private);
+}
+
+static ssize_t ab8500_gpadc_trig_edge_write(struct file *file,
+	const char __user *user_buf,
+	size_t count, loff_t *ppos)
+{
+	struct device *dev = ((struct seq_file *)(file->private_data))->private;
+	unsigned long user_trig_edge;
+	int err;
+
+	err = kstrtoul_from_user(user_buf, count, 0, &user_trig_edge);
+	if (err)
+		return err;
+
+	if ((user_trig_edge == RISING_EDGE)
+			|| (user_trig_edge == FALLING_EDGE)) {
+		trig_edge = (u8) user_trig_edge;
+	} else {
+		dev_err(dev, "Wrong input:\n"
+			"Enter 0. Rising edge\n"
+			"Enter 1. Falling edge\n");
+		return -EINVAL;
+	}
+
+	return count;
+}
+
+static const struct file_operations ab8500_gpadc_trig_edge_fops = {
+	.open = ab8500_gpadc_trig_edge_open,
+	.read = seq_read,
+	.write = ab8500_gpadc_trig_edge_write,
+	.llseek = seq_lseek,
+	.release = single_release,
+	.owner = THIS_MODULE,
+};
+
+static int ab8500_gpadc_trig_timer_print(struct seq_file *s, void *p)
+{
+	return seq_printf(s, "%d\n", trig_timer);
+}
+
+static int ab8500_gpadc_trig_timer_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, ab8500_gpadc_trig_timer_print,
+		inode->i_private);
+}
+
+static ssize_t ab8500_gpadc_trig_timer_write(struct file *file,
+	const char __user *user_buf,
+	size_t count, loff_t *ppos)
+{
+	struct device *dev = ((struct seq_file *)(file->private_data))->private;
+	unsigned long user_trig_timer;
+	int err;
+
+	err = kstrtoul_from_user(user_buf, count, 0, &user_trig_timer);
+	if (err)
+		return err;
+
+	if ((user_trig_timer >= 0) && (user_trig_timer <= 255)) {
+		trig_timer = (u8) user_trig_timer;
+	} else {
+		dev_err(dev, "debugfs error input: "
+			"should be beetween 0 to 255\n");
+		return -EINVAL;
+	}
+
+	return count;
+}
+
+static const struct file_operations ab8500_gpadc_trig_timer_fops = {
+	.open = ab8500_gpadc_trig_timer_open,
+	.read = seq_read,
+	.write = ab8500_gpadc_trig_timer_write,
+	.llseek = seq_lseek,
+	.release = single_release,
+	.owner = THIS_MODULE,
+};
+
+static int ab8500_gpadc_conv_type_print(struct seq_file *s, void *p)
+{
+	return seq_printf(s, "%d\n", conv_type);
+}
+
+static int ab8500_gpadc_conv_type_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, ab8500_gpadc_conv_type_print,
+		inode->i_private);
+}
+
+static ssize_t ab8500_gpadc_conv_type_write(struct file *file,
+	const char __user *user_buf,
+	size_t count, loff_t *ppos)
+{
+	struct device *dev = ((struct seq_file *)(file->private_data))->private;
+	unsigned long user_conv_type;
+	int err;
+
+	err = kstrtoul_from_user(user_buf, count, 0, &user_conv_type);
+	if (err)
+		return err;
+
+	if ((user_conv_type == ADC_SW)
+			|| (user_conv_type == ADC_HW)) {
+		conv_type = (u8) user_conv_type;
+	} else {
+		dev_err(dev, "Wrong input:\n"
+			"Enter 0. ADC SW conversion\n"
+			"Enter 1. ADC HW conversion\n");
+		return -EINVAL;
+	}
+
+	return count;
+}
+
+static const struct file_operations ab8500_gpadc_conv_type_fops = {
+	.open = ab8500_gpadc_conv_type_open,
+	.read = seq_read,
+	.write = ab8500_gpadc_conv_type_write,
+	.llseek = seq_lseek,
+	.release = single_release,
+	.owner = THIS_MODULE,
+};
+
 /*
  * return length of an ASCII numerical value, 0 is string is not a
  * numerical value.
@@ -1352,7 +2745,7 @@ static int ab8500_subscribe_unsubscribe_open(struct inode *inode,
 					     struct file *file)
 {
 	return single_open(file, ab8500_subscribe_unsubscribe_print,
-			   inode->i_private);
+		inode->i_private);
 }
 
 /*
@@ -1382,21 +2775,14 @@ static ssize_t ab8500_subscribe_write(struct file *file,
 				      size_t count, loff_t *ppos)
 {
 	struct device *dev = ((struct seq_file *)(file->private_data))->private;
-	char buf[32];
-	int buf_size;
 	unsigned long user_val;
 	int err;
 	unsigned int irq_index;
 
-	/* Get userspace string and assure termination */
-	buf_size = min(count, (sizeof(buf)-1));
-	if (copy_from_user(buf, user_buf, buf_size))
-		return -EFAULT;
-	buf[buf_size] = 0;
-
-	err = strict_strtoul(buf, 0, &user_val);
+	err = kstrtoul_from_user(user_buf, count, 0, &user_val);
 	if (err)
-		return -EINVAL;
+		return err;
+
 	if (user_val < irq_first) {
 		dev_err(dev, "debugfs error input < %d\n", irq_first);
 		return -EINVAL;
@@ -1416,7 +2802,7 @@ static ssize_t ab8500_subscribe_write(struct file *file,
 	 */
 	dev_attr[irq_index] = kmalloc(sizeof(struct device_attribute),
 		GFP_KERNEL);
-	event_name[irq_index] = kmalloc(buf_size, GFP_KERNEL);
+	event_name[irq_index] = kmalloc(count, GFP_KERNEL);
 	sprintf(event_name[irq_index], "%lu", user_val);
 	dev_attr[irq_index]->show = show_irq;
 	dev_attr[irq_index]->store = NULL;
@@ -1438,7 +2824,7 @@ static ssize_t ab8500_subscribe_write(struct file *file,
 		return err;
 	}
 
-	return buf_size;
+	return count;
 }
 
 static ssize_t ab8500_unsubscribe_write(struct file *file,
@@ -1446,21 +2832,14 @@ static ssize_t ab8500_unsubscribe_write(struct file *file,
 					size_t count, loff_t *ppos)
 {
 	struct device *dev = ((struct seq_file *)(file->private_data))->private;
-	char buf[32];
-	int buf_size;
 	unsigned long user_val;
 	int err;
 	unsigned int irq_index;
 
-	/* Get userspace string and assure termination */
-	buf_size = min(count, (sizeof(buf)-1));
-	if (copy_from_user(buf, user_buf, buf_size))
-		return -EFAULT;
-	buf[buf_size] = 0;
-
-	err = strict_strtoul(buf, 0, &user_val);
+	err = kstrtoul_from_user(user_buf, count, 0, &user_val);
 	if (err)
-		return -EINVAL;
+		return err;
+
 	if (user_val < irq_first) {
 		dev_err(dev, "debugfs error input < %d\n", irq_first);
 		return -EINVAL;
@@ -1485,7 +2864,7 @@ static ssize_t ab8500_unsubscribe_write(struct file *file,
 	kfree(event_name[irq_index]);
 	kfree(dev_attr[irq_index]);
 
-	return buf_size;
+	return count;
 }
 
 /*
@@ -1583,7 +2962,7 @@ static int ab8500_debug_probe(struct platform_device *plf)
 	irq_first = platform_get_irq_byname(plf, "IRQ_FIRST");
 	if (irq_first < 0) {
 		dev_err(&plf->dev, "First irq not found, err %d\n",
-				irq_first);
+			irq_first);
 		ret = irq_first;
 		goto out_freeevent_name;
 	}
@@ -1591,9 +2970,9 @@ static int ab8500_debug_probe(struct platform_device *plf)
 	irq_last = platform_get_irq_byname(plf, "IRQ_LAST");
 	if (irq_last < 0) {
 		dev_err(&plf->dev, "Last irq not found, err %d\n",
-				irq_last);
+			irq_last);
 		ret = irq_last;
-                goto out_freeevent_name;
+		goto out_freeevent_name;
 	}
 
 	ab8500_dir = debugfs_create_dir(AB8500_NAME_STRING, NULL);
@@ -1601,124 +2980,198 @@ static int ab8500_debug_probe(struct platform_device *plf)
 		goto err;
 
 	ab8500_gpadc_dir = debugfs_create_dir(AB8500_ADC_NAME_STRING,
-	    ab8500_dir);
+		ab8500_dir);
 	if (!ab8500_gpadc_dir)
 		goto err;
 
 	file = debugfs_create_file("all-bank-registers", S_IRUGO,
-	    ab8500_dir, &plf->dev, &ab8500_registers_fops);
+		ab8500_dir, &plf->dev, &ab8500_registers_fops);
 	if (!file)
 		goto err;
 
 	file = debugfs_create_file("all-banks", S_IRUGO,
-	    ab8500_dir, &plf->dev, &ab8500_all_banks_fops);
+		ab8500_dir, &plf->dev, &ab8500_all_banks_fops);
 	if (!file)
 		goto err;
 
-	file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR),
-	    ab8500_dir, &plf->dev, &ab8500_bank_fops);
+	file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP),
+		ab8500_dir, &plf->dev, &ab8500_bank_fops);
 	if (!file)
 		goto err;
 
-	file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR),
-	    ab8500_dir, &plf->dev, &ab8500_address_fops);
+	file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP),
+		ab8500_dir, &plf->dev, &ab8500_address_fops);
 	if (!file)
 		goto err;
 
-	file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR),
-	    ab8500_dir, &plf->dev, &ab8500_val_fops);
+	file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP),
+		ab8500_dir, &plf->dev, &ab8500_val_fops);
 	if (!file)
 		goto err;
 
-	file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR),
-	    ab8500_dir, &plf->dev, &ab8500_subscribe_fops);
+	file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP),
+		ab8500_dir, &plf->dev, &ab8500_subscribe_fops);
 	if (!file)
 		goto err;
 
-	if (is_ab8500(ab8500))
+	if (is_ab8500(ab8500)) {
+		debug_ranges = ab8500_debug_ranges;
 		num_interrupt_lines = AB8500_NR_IRQS;
-	else if (is_ab8505(ab8500))
+	} else if (is_ab8505(ab8500)) {
+		debug_ranges = ab8505_debug_ranges;
 		num_interrupt_lines = AB8505_NR_IRQS;
-	else if (is_ab9540(ab8500))
+	} else if (is_ab9540(ab8500)) {
+		debug_ranges = ab8505_debug_ranges;
 		num_interrupt_lines = AB9540_NR_IRQS;
+	} else if (is_ab8540(ab8500)) {
+		debug_ranges = ab8540_debug_ranges;
+		num_interrupt_lines = AB8540_NR_IRQS;
+	}
 
 	file = debugfs_create_file("interrupts", (S_IRUGO),
-	    ab8500_dir, &plf->dev, &ab8500_interrupts_fops);
+		ab8500_dir, &plf->dev, &ab8500_interrupts_fops);
 	if (!file)
 		goto err;
 
-	file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR),
-	    ab8500_dir, &plf->dev, &ab8500_unsubscribe_fops);
+	file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP),
+		ab8500_dir, &plf->dev, &ab8500_unsubscribe_fops);
 	if (!file)
 		goto err;
 
-	file = debugfs_create_file("hwreg", (S_IRUGO | S_IWUSR),
-	    ab8500_dir, &plf->dev, &ab8500_hwreg_fops);
+	file = debugfs_create_file("hwreg", (S_IRUGO | S_IWUSR | S_IWGRP),
+		ab8500_dir, &plf->dev, &ab8500_hwreg_fops);
 	if (!file)
 		goto err;
 
-	file = debugfs_create_file("bat_ctrl", (S_IRUGO | S_IWUSR),
-	    ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_bat_ctrl_fops);
+	file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP),
+		ab8500_dir, &plf->dev, &ab8500_modem_fops);
 	if (!file)
 		goto err;
 
-	file = debugfs_create_file("btemp_ball", (S_IRUGO | S_IWUSR),
-	    ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_btemp_ball_fops);
+	file = debugfs_create_file("bat_ctrl", (S_IRUGO | S_IWUSR | S_IWGRP),
+		ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_bat_ctrl_fops);
 	if (!file)
 		goto err;
 
-	file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR),
-	    ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_main_charger_v_fops);
+	file = debugfs_create_file("btemp_ball", (S_IRUGO | S_IWUSR | S_IWGRP),
+		ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_btemp_ball_fops);
 	if (!file)
 		goto err;
 
-	file = debugfs_create_file("acc_detect1", (S_IRUGO | S_IWUSR),
-	    ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_acc_detect1_fops);
+	file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP),
+		ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_main_charger_v_fops);
 	if (!file)
 		goto err;
 
-	file = debugfs_create_file("acc_detect2", (S_IRUGO | S_IWUSR),
-	    ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_acc_detect2_fops);
+	file = debugfs_create_file("acc_detect1", (S_IRUGO | S_IWUSR | S_IWGRP),
+		ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_acc_detect1_fops);
 	if (!file)
 		goto err;
 
-	file = debugfs_create_file("adc_aux1", (S_IRUGO | S_IWUSR),
-	    ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_aux1_fops);
+	file = debugfs_create_file("acc_detect2", (S_IRUGO | S_IWUSR | S_IWGRP),
+		ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_acc_detect2_fops);
 	if (!file)
 		goto err;
 
-	file = debugfs_create_file("adc_aux2", (S_IRUGO | S_IWUSR),
-	    ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_aux2_fops);
+	file = debugfs_create_file("adc_aux1", (S_IRUGO | S_IWUSR | S_IWGRP),
+		ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_aux1_fops);
 	if (!file)
 		goto err;
 
-	file = debugfs_create_file("main_bat_v", (S_IRUGO | S_IWUSR),
-	    ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_main_bat_v_fops);
+	file = debugfs_create_file("adc_aux2", (S_IRUGO | S_IWUSR | S_IWGRP),
+		ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_aux2_fops);
 	if (!file)
 		goto err;
 
-	file = debugfs_create_file("vbus_v", (S_IRUGO | S_IWUSR),
-	    ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_vbus_v_fops);
+	file = debugfs_create_file("main_bat_v", (S_IRUGO | S_IWUSR | S_IWGRP),
+		ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_main_bat_v_fops);
 	if (!file)
 		goto err;
 
-	file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR),
-	    ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_main_charger_c_fops);
+	file = debugfs_create_file("vbus_v", (S_IRUGO | S_IWUSR | S_IWGRP),
+		ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_vbus_v_fops);
+	if (!file)
+		goto err;
+
+	file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP),
+		ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_main_charger_c_fops);
+	if (!file)
+		goto err;
+
+	file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP),
+		ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_usb_charger_c_fops);
+	if (!file)
+		goto err;
+
+	file = debugfs_create_file("bk_bat_v", (S_IRUGO | S_IWUSR | S_IWGRP),
+		ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_bk_bat_v_fops);
+	if (!file)
+		goto err;
+
+	file = debugfs_create_file("die_temp", (S_IRUGO | S_IWUSR | S_IWGRP),
+		ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_die_temp_fops);
+	if (!file)
+		goto err;
+
+	file = debugfs_create_file("usb_id", (S_IRUGO | S_IWUSR | S_IWGRP),
+		ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_usb_id_fops);
+	if (!file)
+		goto err;
+
+	if (is_ab8540(ab8500)) {
+		file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP),
+			ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops);
+		if (!file)
+			goto err;
+		file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP),
+			ab8500_gpadc_dir, &plf->dev,
+			&ab8540_gpadc_vbat_true_meas_fops);
+		if (!file)
+			goto err;
+		file = debugfs_create_file("batctrl_and_ibat",
+			(S_IRUGO | S_IWUGO), ab8500_gpadc_dir,
+			&plf->dev, &ab8540_gpadc_bat_ctrl_and_ibat_fops);
+		if (!file)
+			goto err;
+		file = debugfs_create_file("vbatmeas_and_ibat",
+			(S_IRUGO | S_IWUGO), ab8500_gpadc_dir,
+			&plf->dev,
+			&ab8540_gpadc_vbat_meas_and_ibat_fops);
+		if (!file)
+			goto err;
+		file = debugfs_create_file("vbattruemeas_and_ibat",
+			(S_IRUGO | S_IWUGO), ab8500_gpadc_dir,
+			&plf->dev,
+			&ab8540_gpadc_vbat_true_meas_and_ibat_fops);
+		if (!file)
+			goto err;
+		file = debugfs_create_file("battemp_and_ibat",
+			(S_IRUGO | S_IWUGO), ab8500_gpadc_dir,
+			&plf->dev, &ab8540_gpadc_bat_temp_and_ibat_fops);
+		if (!file)
+			goto err;
+		file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP),
+			ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops);
+		if (!file)
+			goto err;
+	}
+	file = debugfs_create_file("avg_sample", (S_IRUGO | S_IWUSR | S_IWGRP),
+		ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_avg_sample_fops);
 	if (!file)
 		goto err;
 
-	file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR),
-	    ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_usb_charger_c_fops);
+	file = debugfs_create_file("trig_edge", (S_IRUGO | S_IWUSR | S_IWGRP),
+		ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_trig_edge_fops);
 	if (!file)
 		goto err;
 
-	file = debugfs_create_file("bk_bat_v", (S_IRUGO | S_IWUSR),
-	    ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_bk_bat_v_fops);
+	file = debugfs_create_file("trig_timer", (S_IRUGO | S_IWUSR | S_IWGRP),
+		ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_trig_timer_fops);
 	if (!file)
 		goto err;
 
-	file = debugfs_create_file("die_temp", (S_IRUGO | S_IWUSR),
-	    ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_die_temp_fops);
+	file = debugfs_create_file("conv_type", (S_IRUGO | S_IWUSR | S_IWGRP),
+		ab8500_gpadc_dir, &plf->dev, &ab8500_gpadc_conv_type_fops);
 	if (!file)
 		goto err;
 
diff --git a/drivers/mfd/ab8500-gpadc.c b/drivers/mfd/ab8500-gpadc.c
index 5f341a50ee5a..65f72284185d 100644
--- a/drivers/mfd/ab8500-gpadc.c
+++ b/drivers/mfd/ab8500-gpadc.c
@@ -37,6 +37,13 @@
 #define AB8500_GPADC_AUTODATAL_REG	0x07
 #define AB8500_GPADC_AUTODATAH_REG	0x08
 #define AB8500_GPADC_MUX_CTRL_REG	0x09
+#define AB8540_GPADC_MANDATA2L_REG	0x09
+#define AB8540_GPADC_MANDATA2H_REG	0x0A
+#define AB8540_GPADC_APEAAX_REG		0x10
+#define AB8540_GPADC_APEAAT_REG		0x11
+#define AB8540_GPADC_APEAAM_REG		0x12
+#define AB8540_GPADC_APEAAH_REG		0x13
+#define AB8540_GPADC_APEAAL_REG		0x14
 
 /*
  * OTP register offsets
@@ -49,19 +56,29 @@
 #define AB8500_GPADC_CAL_5		0x13
 #define AB8500_GPADC_CAL_6		0x14
 #define AB8500_GPADC_CAL_7		0x15
+/* New calibration for 8540 */
+#define AB8540_GPADC_OTP4_REG_7	0x38
+#define AB8540_GPADC_OTP4_REG_6	0x39
+#define AB8540_GPADC_OTP4_REG_5	0x3A
 
 /* gpadc constants */
 #define EN_VINTCORE12			0x04
 #define EN_VTVOUT			0x02
 #define EN_GPADC			0x01
 #define DIS_GPADC			0x00
-#define SW_AVG_16			0x60
+#define AVG_1				0x00
+#define AVG_4				0x20
+#define AVG_8				0x40
+#define AVG_16				0x60
 #define ADC_SW_CONV			0x04
 #define EN_ICHAR			0x80
 #define BTEMP_PULL_UP			0x08
 #define EN_BUF				0x40
 #define DIS_ZERO			0x00
 #define GPADC_BUSY			0x01
+#define EN_FALLING			0x10
+#define EN_TRIG_EDGE			0x02
+#define EN_VBIAS_XTAL_TEMP		0x02
 
 /* GPADC constants from AB8500 spec, UM0836 */
 #define ADC_RESOLUTION			1024
@@ -80,8 +97,21 @@
 #define ADC_CH_BKBAT_MIN		0
 #define ADC_CH_BKBAT_MAX		3200
 
+/* GPADC constants from AB8540 spec */
+#define ADC_CH_IBAT_MIN			(-6000) /* mA range measured by ADC for ibat*/
+#define ADC_CH_IBAT_MAX			6000
+#define ADC_CH_IBAT_MIN_V		(-60)	/* mV range measured by ADC for ibat*/
+#define ADC_CH_IBAT_MAX_V		60
+#define IBAT_VDROP_L			(-56)  /* mV */
+#define IBAT_VDROP_H			56
+
 /* This is used to not lose precision when dividing to get gain and offset */
-#define CALIB_SCALE			1000
+#define CALIB_SCALE		1000
+/*
+ * Number of bits shift used to not lose precision
+ * when dividing to get ibat gain.
+ */
+#define CALIB_SHIFT_IBAT	20
 
 /* Time in ms before disabling regulator */
 #define GPADC_AUDOSUSPEND_DELAY		1
@@ -92,6 +122,7 @@ enum cal_channels {
 	ADC_INPUT_VMAIN = 0,
 	ADC_INPUT_BTEMP,
 	ADC_INPUT_VBAT,
+	ADC_INPUT_IBAT,
 	NBR_CAL_INPUTS,
 };
 
@@ -102,8 +133,10 @@ enum cal_channels {
  * @offset:		Offset of the ADC channel
  */
 struct adc_cal_data {
-	u64 gain;
-	u64 offset;
+	s64 gain;
+	s64 offset;
+	u16 otp_calib_hi;
+	u16 otp_calib_lo;
 };
 
 /**
@@ -116,7 +149,10 @@ struct adc_cal_data {
  *				the completion of gpadc conversion
  * @ab8500_gpadc_lock:		structure of type mutex
  * @regu:			pointer to the struct regulator
- * @irq:			interrupt number that is used by gpadc
+ * @irq_sw:			interrupt number that is used by gpadc for Sw
+ *				conversion
+ * @irq_hw:			interrupt number that is used by gpadc for Hw
+ *				conversion
  * @cal_data			array of ADC calibration data structs
  */
 struct ab8500_gpadc {
@@ -126,7 +162,8 @@ struct ab8500_gpadc {
 	struct completion ab8500_gpadc_complete;
 	struct mutex ab8500_gpadc_lock;
 	struct regulator *regu;
-	int irq;
+	int irq_sw;
+	int irq_hw;
 	struct adc_cal_data cal_data[NBR_CAL_INPUTS];
 };
 
@@ -171,6 +208,7 @@ int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc, u8 channel,
 			gpadc->cal_data[ADC_INPUT_VMAIN].offset) / CALIB_SCALE;
 		break;
 
+	case XTAL_TEMP:
 	case BAT_CTRL:
 	case BTEMP_BALL:
 	case ACC_DETECT1:
@@ -189,6 +227,7 @@ int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc, u8 channel,
 		break;
 
 	case MAIN_BAT_V:
+	case VBAT_TRUE_MEAS:
 		/* For some reason we don't have calibrated data */
 		if (!gpadc->cal_data[ADC_INPUT_VBAT].gain) {
 			res = ADC_CH_VBAT_MIN + (ADC_CH_VBAT_MAX -
@@ -232,6 +271,20 @@ int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc, u8 channel,
 			ADC_RESOLUTION;
 		break;
 
+	case IBAT_VIRTUAL_CHANNEL:
+		/* For some reason we don't have calibrated data */
+		if (!gpadc->cal_data[ADC_INPUT_IBAT].gain) {
+			res = ADC_CH_IBAT_MIN + (ADC_CH_IBAT_MAX -
+				ADC_CH_IBAT_MIN) * ad_value /
+				ADC_RESOLUTION;
+			break;
+		}
+		/* Here we can use the calibrated data */
+		res = (int) (ad_value * gpadc->cal_data[ADC_INPUT_IBAT].gain +
+				gpadc->cal_data[ADC_INPUT_IBAT].offset)
+				>> CALIB_SHIFT_IBAT;
+		break;
+
 	default:
 		dev_err(gpadc->dev,
 			"unknown channel, not possible to convert\n");
@@ -244,25 +297,35 @@ int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc, u8 channel,
 EXPORT_SYMBOL(ab8500_gpadc_ad_to_voltage);
 
 /**
- * ab8500_gpadc_convert() - gpadc conversion
+ * ab8500_gpadc_sw_hw_convert() - gpadc conversion
  * @channel:	analog channel to be converted to digital data
+ * @avg_sample:  number of ADC sample to average
+ * @trig_egde:  selected ADC trig edge
+ * @trig_timer: selected ADC trigger delay timer
+ * @conv_type: selected conversion type (HW or SW conversion)
  *
  * This function converts the selected analog i/p to digital
  * data.
  */
-int ab8500_gpadc_convert(struct ab8500_gpadc *gpadc, u8 channel)
+int ab8500_gpadc_sw_hw_convert(struct ab8500_gpadc *gpadc, u8 channel,
+		u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type)
 {
 	int ad_value;
 	int voltage;
 
-	ad_value = ab8500_gpadc_read_raw(gpadc, channel);
-	if (ad_value < 0) {
-		dev_err(gpadc->dev, "GPADC raw value failed ch: %d\n", channel);
+	ad_value = ab8500_gpadc_read_raw(gpadc, channel, avg_sample,
+			trig_edge, trig_timer, conv_type);
+/* On failure retry a second time */
+	if (ad_value < 0)
+		ad_value = ab8500_gpadc_read_raw(gpadc, channel, avg_sample,
+			trig_edge, trig_timer, conv_type);
+if (ad_value < 0) {
+		dev_err(gpadc->dev, "GPADC raw value failed ch: %d\n",
+				channel);
 		return ad_value;
 	}
 
 	voltage = ab8500_gpadc_ad_to_voltage(gpadc, channel, ad_value);
-
 	if (voltage < 0)
 		dev_err(gpadc->dev, "GPADC to voltage conversion failed ch:"
 			" %d AD: 0x%x\n", channel, ad_value);
@@ -274,21 +337,46 @@ EXPORT_SYMBOL(ab8500_gpadc_convert);
 /**
  * ab8500_gpadc_read_raw() - gpadc read
  * @channel:	analog channel to be read
+ * @avg_sample:  number of ADC sample to average
+ * @trig_edge:  selected trig edge
+ * @trig_timer: selected ADC trigger delay timer
+ * @conv_type: selected conversion type (HW or SW conversion)
  *
- * This function obtains the raw ADC value, this then needs
- * to be converted by calling ab8500_gpadc_ad_to_voltage()
+ * This function obtains the raw ADC value for an hardware conversion,
+ * this then needs to be converted by calling ab8500_gpadc_ad_to_voltage()
  */
-int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel)
+int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
+		u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type)
+{
+	int raw_data;
+	raw_data = ab8500_gpadc_double_read_raw(gpadc, channel,
+			avg_sample, trig_edge, trig_timer, conv_type, NULL);
+	return raw_data;
+}
+
+int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
+		u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type,
+		int *ibat)
 {
 	int ret;
 	int looplimit = 0;
-	u8 val, low_data, high_data;
+	unsigned long completion_timeout;
+	u8 val, low_data, high_data, low_data2, high_data2;
+	u8 val_reg1 = 0;
+	unsigned int delay_min = 0;
+	unsigned int delay_max = 0;
+	u8 data_low_addr, data_high_addr;
 
 	if (!gpadc)
 		return -ENODEV;
 
-	mutex_lock(&gpadc->ab8500_gpadc_lock);
+	/* check if convertion is supported */
+	if ((gpadc->irq_sw < 0) && (conv_type == ADC_SW))
+		return -ENOTSUPP;
+	if ((gpadc->irq_hw < 0) && (conv_type == ADC_HW))
+		return -ENOTSUPP;
 
+	mutex_lock(&gpadc->ab8500_gpadc_lock);
 	/* Enable VTVout LDO this is required for GPADC */
 	pm_runtime_get_sync(gpadc->dev);
 
@@ -309,16 +397,34 @@ int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel)
 	}
 
 	/* Enable GPADC */
-	ret = abx500_mask_and_set_register_interruptible(gpadc->dev,
-		AB8500_GPADC, AB8500_GPADC_CTRL1_REG, EN_GPADC, EN_GPADC);
-	if (ret < 0) {
-		dev_err(gpadc->dev, "gpadc_conversion: enable gpadc failed\n");
-		goto out;
+	val_reg1 |= EN_GPADC;
+
+	/* Select the channel source and set average samples */
+	switch (avg_sample) {
+	case SAMPLE_1:
+		val = channel | AVG_1;
+		break;
+	case SAMPLE_4:
+		val = channel | AVG_4;
+		break;
+	case SAMPLE_8:
+		val = channel | AVG_8;
+		break;
+	default:
+		val = channel | AVG_16;
+		break;
 	}
 
-	/* Select the channel source and set average samples to 16 */
-	ret = abx500_set_register_interruptible(gpadc->dev, AB8500_GPADC,
-		AB8500_GPADC_CTRL2_REG, (channel | SW_AVG_16));
+	if (conv_type == ADC_HW) {
+		ret = abx500_set_register_interruptible(gpadc->dev,
+				AB8500_GPADC, AB8500_GPADC_CTRL3_REG, val);
+		val_reg1 |= EN_TRIG_EDGE;
+		if (trig_edge)
+			val_reg1 |= EN_FALLING;
+	}
+	else
+		ret = abx500_set_register_interruptible(gpadc->dev,
+				AB8500_GPADC, AB8500_GPADC_CTRL2_REG, val);
 	if (ret < 0) {
 		dev_err(gpadc->dev,
 			"gpadc_conversion: set avg samples failed\n");
@@ -333,71 +439,129 @@ int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel)
 	switch (channel) {
 	case MAIN_CHARGER_C:
 	case USB_CHARGER_C:
-		ret = abx500_mask_and_set_register_interruptible(gpadc->dev,
-			AB8500_GPADC, AB8500_GPADC_CTRL1_REG,
-			EN_BUF | EN_ICHAR,
-			EN_BUF | EN_ICHAR);
+		val_reg1 |= EN_BUF | EN_ICHAR;
 		break;
 	case BTEMP_BALL:
 		if (!is_ab8500_2p0_or_earlier(gpadc->parent)) {
-			/* Turn on btemp pull-up on ABB 3.0 */
-			ret = abx500_mask_and_set_register_interruptible(
-				gpadc->dev,
-				AB8500_GPADC, AB8500_GPADC_CTRL1_REG,
-				EN_BUF | BTEMP_PULL_UP,
-				EN_BUF | BTEMP_PULL_UP);
-
-		 /*
-		  * Delay might be needed for ABB8500 cut 3.0, if not, remove
-		  * when hardware will be available
-		  */
-			usleep_range(1000, 1000);
+			val_reg1 |= EN_BUF | BTEMP_PULL_UP;
+			/*
+			* Delay might be needed for ABB8500 cut 3.0, if not,
+			* remove when hardware will be availible
+			*/
+			delay_min = 1000; /* Delay in micro seconds */
+			delay_max = 10000; /* large range to optimise sleep mode */
 			break;
 		}
 		/* Intentional fallthrough */
 	default:
-		ret = abx500_mask_and_set_register_interruptible(gpadc->dev,
-			AB8500_GPADC, AB8500_GPADC_CTRL1_REG, EN_BUF, EN_BUF);
+		val_reg1 |= EN_BUF;
 		break;
 	}
+
+	/* Write configuration to register */
+	ret = abx500_set_register_interruptible(gpadc->dev,
+		AB8500_GPADC, AB8500_GPADC_CTRL1_REG, val_reg1);
 	if (ret < 0) {
 		dev_err(gpadc->dev,
-			"gpadc_conversion: select falling edge failed\n");
+			"gpadc_conversion: set Control register failed\n");
 		goto out;
 	}
 
-	ret = abx500_mask_and_set_register_interruptible(gpadc->dev,
-		AB8500_GPADC, AB8500_GPADC_CTRL1_REG, ADC_SW_CONV, ADC_SW_CONV);
-	if (ret < 0) {
-		dev_err(gpadc->dev,
-			"gpadc_conversion: start s/w conversion failed\n");
-		goto out;
+	if (delay_min != 0)
+		usleep_range(delay_min, delay_max);
+
+	if (conv_type == ADC_HW) {
+		/* Set trigger delay timer */
+		ret = abx500_set_register_interruptible(gpadc->dev,
+			AB8500_GPADC, AB8500_GPADC_AUTO_TIMER_REG, trig_timer);
+		if (ret < 0) {
+			dev_err(gpadc->dev,
+				"gpadc_conversion: trig timer failed\n");
+			goto out;
+		}
+		completion_timeout = 2 * HZ;
+		data_low_addr = AB8500_GPADC_AUTODATAL_REG;
+		data_high_addr = AB8500_GPADC_AUTODATAH_REG;
+	} else {
+		/* Start SW conversion */
+		ret = abx500_mask_and_set_register_interruptible(gpadc->dev,
+			AB8500_GPADC, AB8500_GPADC_CTRL1_REG,
+			ADC_SW_CONV, ADC_SW_CONV);
+		if (ret < 0) {
+			dev_err(gpadc->dev,
+				"gpadc_conversion: start s/w conv failed\n");
+			goto out;
+		}
+		completion_timeout = msecs_to_jiffies(CONVERSION_TIME);
+		data_low_addr = AB8500_GPADC_MANDATAL_REG;
+		data_high_addr = AB8500_GPADC_MANDATAH_REG;
 	}
+
 	/* wait for completion of conversion */
 	if (!wait_for_completion_timeout(&gpadc->ab8500_gpadc_complete,
-					 msecs_to_jiffies(CONVERSION_TIME))) {
+			completion_timeout)) {
 		dev_err(gpadc->dev,
-			"timeout: didn't receive GPADC conversion interrupt\n");
+			"timeout didn't receive GPADC conv interrupt\n");
 		ret = -EINVAL;
 		goto out;
 	}
 
 	/* Read the converted RAW data */
-	ret = abx500_get_register_interruptible(gpadc->dev, AB8500_GPADC,
-		AB8500_GPADC_MANDATAL_REG, &low_data);
+	ret = abx500_get_register_interruptible(gpadc->dev,
+			AB8500_GPADC, data_low_addr, &low_data);
 	if (ret < 0) {
 		dev_err(gpadc->dev, "gpadc_conversion: read low data failed\n");
 		goto out;
 	}
 
-	ret = abx500_get_register_interruptible(gpadc->dev, AB8500_GPADC,
-		AB8500_GPADC_MANDATAH_REG, &high_data);
+	ret = abx500_get_register_interruptible(gpadc->dev,
+		AB8500_GPADC, data_high_addr, &high_data);
 	if (ret < 0) {
-		dev_err(gpadc->dev,
-			"gpadc_conversion: read high data failed\n");
+		dev_err(gpadc->dev, "gpadc_conversion: read high data failed\n");
 		goto out;
 	}
 
+	/* Check if double convertion is required */
+	if ((channel == BAT_CTRL_AND_IBAT) ||
+			(channel == VBAT_MEAS_AND_IBAT) ||
+			(channel == VBAT_TRUE_MEAS_AND_IBAT) ||
+			(channel == BAT_TEMP_AND_IBAT)) {
+
+		if (conv_type == ADC_HW) {
+			/* not supported */
+			ret = -ENOTSUPP;
+			dev_err(gpadc->dev,
+				"gpadc_conversion: only SW double conversion supported\n");
+			goto out;
+		} else {
+			/* Read the converted RAW data 2 */
+			ret = abx500_get_register_interruptible(gpadc->dev,
+				AB8500_GPADC, AB8540_GPADC_MANDATA2L_REG,
+				&low_data2);
+			if (ret < 0) {
+				dev_err(gpadc->dev,
+					"gpadc_conversion: read sw low data 2 failed\n");
+				goto out;
+			}
+
+			ret = abx500_get_register_interruptible(gpadc->dev,
+				AB8500_GPADC, AB8540_GPADC_MANDATA2H_REG,
+				&high_data2);
+			if (ret < 0) {
+				dev_err(gpadc->dev,
+					"gpadc_conversion: read sw high data 2 failed\n");
+				goto out;
+			}
+			if (ibat != NULL) {
+				*ibat = (high_data2 << 8) | low_data2;
+			} else {
+				dev_warn(gpadc->dev,
+					"gpadc_conversion: ibat not stored\n");
+			}
+
+		}
+	}
+
 	/* Disable GPADC */
 	ret = abx500_set_register_interruptible(gpadc->dev, AB8500_GPADC,
 		AB8500_GPADC_CTRL1_REG, DIS_GPADC);
@@ -406,6 +570,7 @@ int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel)
 		goto out;
 	}
 
+	/* Disable VTVout LDO this is required for GPADC */
 	pm_runtime_mark_last_busy(gpadc->dev);
 	pm_runtime_put_autosuspend(gpadc->dev);
 
@@ -422,9 +587,7 @@ out:
 	 */
 	(void) abx500_set_register_interruptible(gpadc->dev, AB8500_GPADC,
 		AB8500_GPADC_CTRL1_REG, DIS_GPADC);
-
 	pm_runtime_put(gpadc->dev);
-
 	mutex_unlock(&gpadc->ab8500_gpadc_lock);
 	dev_err(gpadc->dev,
 		"gpadc_conversion: Failed to AD convert channel %d\n", channel);
@@ -433,16 +596,16 @@ out:
 EXPORT_SYMBOL(ab8500_gpadc_read_raw);
 
 /**
- * ab8500_bm_gpswadcconvend_handler() - isr for s/w gpadc conversion completion
+ * ab8500_bm_gpadcconvend_handler() - isr for gpadc conversion completion
  * @irq:	irq number
  * @data:	pointer to the data passed during request irq
  *
- * This is a interrupt service routine for s/w gpadc conversion completion.
+ * This is a interrupt service routine for gpadc conversion completion.
  * Notifies the gpadc completion is completed and the converted raw value
  * can be read from the registers.
  * Returns IRQ status(IRQ_HANDLED)
  */
-static irqreturn_t ab8500_bm_gpswadcconvend_handler(int irq, void *_gpadc)
+static irqreturn_t ab8500_bm_gpadcconvend_handler(int irq, void *_gpadc)
 {
 	struct ab8500_gpadc *gpadc = _gpadc;
 
@@ -461,15 +624,27 @@ static int otp_cal_regs[] = {
 	AB8500_GPADC_CAL_7,
 };
 
+static int otp4_cal_regs[] = {
+	AB8540_GPADC_OTP4_REG_7,
+	AB8540_GPADC_OTP4_REG_6,
+	AB8540_GPADC_OTP4_REG_5,
+};
+
 static void ab8500_gpadc_read_calibration_data(struct ab8500_gpadc *gpadc)
 {
 	int i;
 	int ret[ARRAY_SIZE(otp_cal_regs)];
 	u8 gpadc_cal[ARRAY_SIZE(otp_cal_regs)];
-
+	int ret_otp4[ARRAY_SIZE(otp4_cal_regs)];
+	u8 gpadc_otp4[ARRAY_SIZE(otp4_cal_regs)];
 	int vmain_high, vmain_low;
 	int btemp_high, btemp_low;
 	int vbat_high, vbat_low;
+	int ibat_high, ibat_low;
+	s64 V_gain, V_offset, V2A_gain, V2A_offset;
+	struct ab8500 *ab8500;
+
+	ab8500 = gpadc->parent;
 
 	/* First we read all OTP registers and store the error code */
 	for (i = 0; i < ARRAY_SIZE(otp_cal_regs); i++) {
@@ -489,7 +664,7 @@ static void ab8500_gpadc_read_calibration_data(struct ab8500_gpadc *gpadc)
 	 * bt_h/l = btemp_high/low
 	 * vb_h/l = vbat_high/low
 	 *
-	 * Data bits:
+	 * Data bits 8500/9540:
 	 * | 7	   | 6	   | 5	   | 4	   | 3	   | 2	   | 1	   | 0
 	 * |.......|.......|.......|.......|.......|.......|.......|.......
 	 * |						   | vm_h9 | vm_h8
@@ -507,6 +682,35 @@ static void ab8500_gpadc_read_calibration_data(struct ab8500_gpadc *gpadc)
 	 * | vb_l5 | vb_l4 | vb_l3 | vb_l2 | vb_l1 | vb_l0 |
 	 * |.......|.......|.......|.......|.......|.......|.......|.......
 	 *
+	 * Data bits 8540:
+	 * OTP2
+	 * | 7	   | 6	   | 5	   | 4	   | 3	   | 2	   | 1	   | 0
+	 * |.......|.......|.......|.......|.......|.......|.......|.......
+	 * |
+	 * |.......|.......|.......|.......|.......|.......|.......|.......
+	 * | vm_h9 | vm_h8 | vm_h7 | vm_h6 | vm_h5 | vm_h4 | vm_h3 | vm_h2
+	 * |.......|.......|.......|.......|.......|.......|.......|.......
+	 * | vm_h1 | vm_h0 | vm_l4 | vm_l3 | vm_l2 | vm_l1 | vm_l0 | bt_h9
+	 * |.......|.......|.......|.......|.......|.......|.......|.......
+	 * | bt_h8 | bt_h7 | bt_h6 | bt_h5 | bt_h4 | bt_h3 | bt_h2 | bt_h1
+	 * |.......|.......|.......|.......|.......|.......|.......|.......
+	 * | bt_h0 | bt_l4 | bt_l3 | bt_l2 | bt_l1 | bt_l0 | vb_h9 | vb_h8
+	 * |.......|.......|.......|.......|.......|.......|.......|.......
+	 * | vb_h7 | vb_h6 | vb_h5 | vb_h4 | vb_h3 | vb_h2 | vb_h1 | vb_h0
+	 * |.......|.......|.......|.......|.......|.......|.......|.......
+	 * | vb_l5 | vb_l4 | vb_l3 | vb_l2 | vb_l1 | vb_l0 |
+	 * |.......|.......|.......|.......|.......|.......|.......|.......
+	 *
+	 * Data bits 8540:
+	 * OTP4
+	 * | 7	   | 6	   | 5	   | 4	   | 3	   | 2	   | 1	   | 0
+	 * |.......|.......|.......|.......|.......|.......|.......|.......
+	 * |					   | ib_h9 | ib_h8 | ib_h7
+	 * |.......|.......|.......|.......|.......|.......|.......|.......
+	 * | ib_h6 | ib_h5 | ib_h4 | ib_h3 | ib_h2 | ib_h1 | ib_h0 | ib_l5
+	 * |.......|.......|.......|.......|.......|.......|.......|.......
+	 * | ib_l4 | ib_l3 | ib_l2 | ib_l1 | ib_l0 |
+	 *
 	 *
 	 * Ideal output ADC codes corresponding to injected input voltages
 	 * during manufacturing is:
@@ -519,38 +723,116 @@ static void ab8500_gpadc_read_calibration_data(struct ab8500_gpadc *gpadc)
 	 * vbat_low:   Vin = 2380mV  / ADC ideal code = 33
 	 */
 
-	/* Calculate gain and offset for VMAIN if all reads succeeded */
-	if (!(ret[0] < 0 || ret[1] < 0 || ret[2] < 0)) {
-		vmain_high = (((gpadc_cal[0] & 0x03) << 8) |
-			((gpadc_cal[1] & 0x3F) << 2) |
-			((gpadc_cal[2] & 0xC0) >> 6));
+	if (is_ab8540(ab8500)) {
+		/* Calculate gain and offset for VMAIN if all reads succeeded*/
+		if (!(ret[1] < 0 || ret[2] < 0)) {
+			vmain_high = (((gpadc_cal[1] & 0xFF) << 2) |
+				((gpadc_cal[2] & 0xC0) >> 6));
+			vmain_low = ((gpadc_cal[2] & 0x3E) >> 1);
+
+			gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_hi =
+				(u16)vmain_high;
+			gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_lo =
+				(u16)vmain_low;
+
+			gpadc->cal_data[ADC_INPUT_VMAIN].gain = CALIB_SCALE *
+				(19500 - 315) / (vmain_high - vmain_low);
+			gpadc->cal_data[ADC_INPUT_VMAIN].offset = CALIB_SCALE *
+				19500 - (CALIB_SCALE * (19500 - 315) /
+				(vmain_high - vmain_low)) * vmain_high;
+		} else {
+		gpadc->cal_data[ADC_INPUT_VMAIN].gain = 0;
+		}
 
-		vmain_low = ((gpadc_cal[2] & 0x3E) >> 1);
+		/* Read IBAT calibration Data */
+		for (i = 0; i < ARRAY_SIZE(otp4_cal_regs); i++) {
+			ret_otp4[i] = abx500_get_register_interruptible(
+					gpadc->dev, AB8500_OTP_EMUL,
+					otp4_cal_regs[i],  &gpadc_otp4[i]);
+			if (ret_otp4[i] < 0)
+				dev_err(gpadc->dev,
+					"%s: read otp4 reg 0x%02x failed\n",
+					__func__, otp4_cal_regs[i]);
+		}
 
-		gpadc->cal_data[ADC_INPUT_VMAIN].gain = CALIB_SCALE *
-			(19500 - 315) /	(vmain_high - vmain_low);
+		/* Calculate gain and offset for IBAT if all reads succeeded */
+		if (!(ret_otp4[0] < 0 || ret_otp4[1] < 0 || ret_otp4[2] < 0)) {
+			ibat_high = (((gpadc_otp4[0] & 0x07) << 7) |
+				((gpadc_otp4[1] & 0xFE) >> 1));
+			ibat_low = (((gpadc_otp4[1] & 0x01) << 5) |
+				((gpadc_otp4[2] & 0xF8) >> 3));
+
+			gpadc->cal_data[ADC_INPUT_IBAT].otp_calib_hi =
+				(u16)ibat_high;
+			gpadc->cal_data[ADC_INPUT_IBAT].otp_calib_lo =
+				(u16)ibat_low;
+
+			V_gain = ((IBAT_VDROP_H - IBAT_VDROP_L)
+				<< CALIB_SHIFT_IBAT) / (ibat_high - ibat_low);
+
+			V_offset = (IBAT_VDROP_H << CALIB_SHIFT_IBAT) -
+				(((IBAT_VDROP_H - IBAT_VDROP_L) <<
+				CALIB_SHIFT_IBAT) / (ibat_high - ibat_low))
+				* ibat_high;
+			/*
+			 * Result obtained is in mV (at a scale factor),
+			 * we need to calculate gain and offset to get mA
+			 */
+			V2A_gain = (ADC_CH_IBAT_MAX - ADC_CH_IBAT_MIN)/
+				(ADC_CH_IBAT_MAX_V - ADC_CH_IBAT_MIN_V);
+			V2A_offset = ((ADC_CH_IBAT_MAX_V * ADC_CH_IBAT_MIN -
+				ADC_CH_IBAT_MAX * ADC_CH_IBAT_MIN_V)
+				<< CALIB_SHIFT_IBAT)
+				/ (ADC_CH_IBAT_MAX_V - ADC_CH_IBAT_MIN_V);
+
+			gpadc->cal_data[ADC_INPUT_IBAT].gain = V_gain * V2A_gain;
+			gpadc->cal_data[ADC_INPUT_IBAT].offset = V_offset *
+				V2A_gain + V2A_offset;
+		} else {
+			gpadc->cal_data[ADC_INPUT_IBAT].gain = 0;
+		}
 
-		gpadc->cal_data[ADC_INPUT_VMAIN].offset = CALIB_SCALE * 19500 -
-			(CALIB_SCALE * (19500 - 315) /
-			 (vmain_high - vmain_low)) * vmain_high;
+		dev_dbg(gpadc->dev, "IBAT gain %llu offset %llu\n",
+			gpadc->cal_data[ADC_INPUT_IBAT].gain,
+			gpadc->cal_data[ADC_INPUT_IBAT].offset);
 	} else {
-		gpadc->cal_data[ADC_INPUT_VMAIN].gain = 0;
+		/* Calculate gain and offset for VMAIN if all reads succeeded */
+		if (!(ret[0] < 0 || ret[1] < 0 || ret[2] < 0)) {
+			vmain_high = (((gpadc_cal[0] & 0x03) << 8) |
+				((gpadc_cal[1] & 0x3F) << 2) |
+				((gpadc_cal[2] & 0xC0) >> 6));
+			vmain_low = ((gpadc_cal[2] & 0x3E) >> 1);
+
+			gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_hi =
+				(u16)vmain_high;
+			gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_lo =
+				(u16)vmain_low;
+
+			gpadc->cal_data[ADC_INPUT_VMAIN].gain = CALIB_SCALE *
+				(19500 - 315) / (vmain_high - vmain_low);
+
+			gpadc->cal_data[ADC_INPUT_VMAIN].offset = CALIB_SCALE *
+				19500 - (CALIB_SCALE * (19500 - 315) /
+				(vmain_high - vmain_low)) * vmain_high;
+		} else {
+			gpadc->cal_data[ADC_INPUT_VMAIN].gain = 0;
+		}
 	}
 
 	/* Calculate gain and offset for BTEMP if all reads succeeded */
 	if (!(ret[2] < 0 || ret[3] < 0 || ret[4] < 0)) {
 		btemp_high = (((gpadc_cal[2] & 0x01) << 9) |
-			(gpadc_cal[3] << 1) |
-			((gpadc_cal[4] & 0x80) >> 7));
-
+			(gpadc_cal[3] << 1) | ((gpadc_cal[4] & 0x80) >> 7));
 		btemp_low = ((gpadc_cal[4] & 0x7C) >> 2);
 
+		gpadc->cal_data[ADC_INPUT_BTEMP].otp_calib_hi = (u16)btemp_high;
+		gpadc->cal_data[ADC_INPUT_BTEMP].otp_calib_lo = (u16)btemp_low;
+
 		gpadc->cal_data[ADC_INPUT_BTEMP].gain =
 			CALIB_SCALE * (1300 - 21) / (btemp_high - btemp_low);
-
 		gpadc->cal_data[ADC_INPUT_BTEMP].offset = CALIB_SCALE * 1300 -
-			(CALIB_SCALE * (1300 - 21) /
-			(btemp_high - btemp_low)) * btemp_high;
+			(CALIB_SCALE * (1300 - 21) / (btemp_high - btemp_low))
+			* btemp_high;
 	} else {
 		gpadc->cal_data[ADC_INPUT_BTEMP].gain = 0;
 	}
@@ -560,9 +842,11 @@ static void ab8500_gpadc_read_calibration_data(struct ab8500_gpadc *gpadc)
 		vbat_high = (((gpadc_cal[4] & 0x03) << 8) | gpadc_cal[5]);
 		vbat_low = ((gpadc_cal[6] & 0xFC) >> 2);
 
+		gpadc->cal_data[ADC_INPUT_VBAT].otp_calib_hi = (u16)vbat_high;
+		gpadc->cal_data[ADC_INPUT_VBAT].otp_calib_lo = (u16)vbat_low;
+
 		gpadc->cal_data[ADC_INPUT_VBAT].gain = CALIB_SCALE *
 			(4700 - 2380) /	(vbat_high - vbat_low);
-
 		gpadc->cal_data[ADC_INPUT_VBAT].offset = CALIB_SCALE * 4700 -
 			(CALIB_SCALE * (4700 - 2380) /
 			(vbat_high - vbat_low)) * vbat_high;
@@ -608,6 +892,31 @@ static int ab8500_gpadc_runtime_idle(struct device *dev)
 	return 0;
 }
 
+static int ab8500_gpadc_suspend(struct device *dev)
+{
+	struct ab8500_gpadc *gpadc = dev_get_drvdata(dev);
+
+	mutex_lock(&gpadc->ab8500_gpadc_lock);
+
+	pm_runtime_get_sync(dev);
+
+	regulator_disable(gpadc->regu);
+	return 0;
+}
+
+static int ab8500_gpadc_resume(struct device *dev)
+{
+	struct ab8500_gpadc *gpadc = dev_get_drvdata(dev);
+
+	regulator_enable(gpadc->regu);
+
+	pm_runtime_mark_last_busy(gpadc->dev);
+	pm_runtime_put_autosuspend(gpadc->dev);
+
+	mutex_unlock(&gpadc->ab8500_gpadc_lock);
+	return 0;
+}
+
 static int ab8500_gpadc_probe(struct platform_device *pdev)
 {
 	int ret = 0;
@@ -619,13 +928,13 @@ static int ab8500_gpadc_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
-	gpadc->irq = platform_get_irq_byname(pdev, "SW_CONV_END");
-	if (gpadc->irq < 0) {
-		dev_err(&pdev->dev, "failed to get platform irq-%d\n",
-			gpadc->irq);
-		ret = gpadc->irq;
-		goto fail;
-	}
+	gpadc->irq_sw = platform_get_irq_byname(pdev, "SW_CONV_END");
+	if (gpadc->irq_sw < 0)
+		dev_err(gpadc->dev, "failed to get platform sw_conv_end irq\n");
+
+	gpadc->irq_hw = platform_get_irq_byname(pdev, "HW_CONV_END");
+	if (gpadc->irq_hw < 0)
+		dev_err(gpadc->dev, "failed to get platform hw_conv_end irq\n");
 
 	gpadc->dev = &pdev->dev;
 	gpadc->parent = dev_get_drvdata(pdev->dev.parent);
@@ -634,15 +943,31 @@ static int ab8500_gpadc_probe(struct platform_device *pdev)
 	/* Initialize completion used to notify completion of conversion */
 	init_completion(&gpadc->ab8500_gpadc_complete);
 
-	/* Register interrupt  - SwAdcComplete */
-	ret = request_threaded_irq(gpadc->irq, NULL,
-		ab8500_bm_gpswadcconvend_handler,
-		IRQF_ONESHOT | IRQF_NO_SUSPEND | IRQF_SHARED,
-				"ab8500-gpadc", gpadc);
-	if (ret < 0) {
-		dev_err(gpadc->dev, "Failed to register interrupt, irq: %d\n",
-			gpadc->irq);
-		goto fail;
+	/* Register interrupts */
+	if (gpadc->irq_sw >= 0) {
+		ret = request_threaded_irq(gpadc->irq_sw, NULL,
+			ab8500_bm_gpadcconvend_handler,
+			IRQF_NO_SUSPEND | IRQF_SHARED, "ab8500-gpadc-sw",
+			gpadc);
+		if (ret < 0) {
+			dev_err(gpadc->dev,
+				"Failed to register interrupt irq: %d\n",
+				gpadc->irq_sw);
+			goto fail;
+		}
+	}
+
+	if (gpadc->irq_hw >= 0) {
+		ret = request_threaded_irq(gpadc->irq_hw, NULL,
+			ab8500_bm_gpadcconvend_handler,
+			IRQF_NO_SUSPEND | IRQF_SHARED, "ab8500-gpadc-hw",
+			gpadc);
+		if (ret < 0) {
+			dev_err(gpadc->dev,
+				"Failed to register interrupt irq: %d\n",
+				gpadc->irq_hw);
+			goto fail_irq;
+		}
 	}
 
 	/* VTVout LDO used to power up ab8500-GPADC */
@@ -669,11 +994,13 @@ static int ab8500_gpadc_probe(struct platform_device *pdev)
 	ab8500_gpadc_read_calibration_data(gpadc);
 	list_add_tail(&gpadc->node, &ab8500_gpadc_list);
 	dev_dbg(gpadc->dev, "probe success\n");
+
 	return 0;
 
 fail_enable:
 fail_irq:
-	free_irq(gpadc->irq, gpadc);
+	free_irq(gpadc->irq_sw, gpadc);
+	free_irq(gpadc->irq_hw, gpadc);
 fail:
 	kfree(gpadc);
 	gpadc = NULL;
@@ -687,7 +1014,10 @@ static int ab8500_gpadc_remove(struct platform_device *pdev)
 	/* remove this gpadc entry from the list */
 	list_del(&gpadc->node);
 	/* remove interrupt  - completion of Sw ADC conversion */
-	free_irq(gpadc->irq, gpadc);
+	if (gpadc->irq_sw >= 0)
+		free_irq(gpadc->irq_sw, gpadc);
+	if (gpadc->irq_hw >= 0)
+		free_irq(gpadc->irq_hw, gpadc);
 
 	pm_runtime_get_sync(gpadc->dev);
 	pm_runtime_disable(gpadc->dev);
@@ -707,6 +1037,9 @@ static const struct dev_pm_ops ab8500_gpadc_pm_ops = {
 	SET_RUNTIME_PM_OPS(ab8500_gpadc_runtime_suspend,
 			   ab8500_gpadc_runtime_resume,
 			   ab8500_gpadc_runtime_idle)
+	SET_SYSTEM_SLEEP_PM_OPS(ab8500_gpadc_suspend,
+				ab8500_gpadc_resume)
+
 };
 
 static struct platform_driver ab8500_gpadc_driver = {
@@ -729,10 +1062,30 @@ static void __exit ab8500_gpadc_exit(void)
 	platform_driver_unregister(&ab8500_gpadc_driver);
 }
 
+/**
+ * ab8540_gpadc_get_otp() - returns OTP values
+ *
+ */
+void ab8540_gpadc_get_otp(struct ab8500_gpadc *gpadc,
+			u16 *vmain_l, u16 *vmain_h, u16 *btemp_l, u16 *btemp_h,
+			u16 *vbat_l, u16 *vbat_h, u16 *ibat_l, u16 *ibat_h)
+{
+	*vmain_l = gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_lo;
+	*vmain_h = gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_hi;
+	*btemp_l = gpadc->cal_data[ADC_INPUT_BTEMP].otp_calib_lo;
+	*btemp_h = gpadc->cal_data[ADC_INPUT_BTEMP].otp_calib_hi;
+	*vbat_l = gpadc->cal_data[ADC_INPUT_VBAT].otp_calib_lo;
+	*vbat_h = gpadc->cal_data[ADC_INPUT_VBAT].otp_calib_hi;
+	*ibat_l = gpadc->cal_data[ADC_INPUT_IBAT].otp_calib_lo;
+	*ibat_h = gpadc->cal_data[ADC_INPUT_IBAT].otp_calib_hi;
+	return ;
+}
+
 subsys_initcall_sync(ab8500_gpadc_init);
 module_exit(ab8500_gpadc_exit);
 
 MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Arun R Murthy, Daniel Willerud, Johan Palsson");
+MODULE_AUTHOR("Arun R Murthy, Daniel Willerud, Johan Palsson,"
+		"M'boumba Cedric Madianga");
 MODULE_ALIAS("platform:ab8500_gpadc");
 MODULE_DESCRIPTION("AB8500 GPADC driver");
diff --git a/drivers/mfd/ab8500-sysctrl.c b/drivers/mfd/ab8500-sysctrl.c
index 108fd86552f0..272479cdb107 100644
--- a/drivers/mfd/ab8500-sysctrl.c
+++ b/drivers/mfd/ab8500-sysctrl.c
@@ -15,19 +15,30 @@
 #include <linux/mfd/abx500/ab8500.h>
 #include <linux/mfd/abx500/ab8500-sysctrl.h>
 
+/* RtcCtrl bits */
+#define AB8500_ALARM_MIN_LOW  0x08
+#define AB8500_ALARM_MIN_MID 0x09
+#define RTC_CTRL 0x0B
+#define RTC_ALARM_ENABLE 0x4
+
 static struct device *sysctrl_dev;
 
 void ab8500_power_off(void)
 {
 	sigset_t old;
 	sigset_t all;
-	static char *pss[] = {"ab8500_ac", "ab8500_usb"};
+	static char *pss[] = {"ab8500_ac", "pm2301", "ab8500_usb"};
 	int i;
 	bool charger_present = false;
 	union power_supply_propval val;
 	struct power_supply *psy;
 	int ret;
 
+	if (sysctrl_dev == NULL) {
+		pr_err("%s: sysctrl not initialized\n", __func__);
+		return;
+	}
+
 	/*
 	 * If we have a charger connected and we're powering off,
 	 * reboot into charge-only mode.
@@ -74,6 +85,63 @@ shutdown:
 	}
 }
 
+/*
+ * Use the AB WD to reset the platform. It will perform a hard
+ * reset instead of a soft reset. Write the reset reason to
+ * the AB before reset, which can be read upon restart.
+ */
+void ab8500_restart(char mode, const char *cmd)
+{
+	struct ab8500_platform_data *plat;
+	struct ab8500_sysctrl_platform_data *pdata;
+	u16 reason = 0;
+	u8 val;
+
+	if (sysctrl_dev == NULL) {
+		pr_err("%s: sysctrl not initialized\n", __func__);
+		return;
+	}
+
+	plat = dev_get_platdata(sysctrl_dev->parent);
+	pdata = plat->sysctrl;
+	if (pdata->reboot_reason_code)
+		reason = pdata->reboot_reason_code(cmd);
+	else
+		pr_warn("[%s] No reboot reason set. Default reason %d\n",
+			__func__, reason);
+
+	/*
+	 * Disable RTC alarm, just a precaution so that no alarm
+	 * is running when WD reset is executed.
+	 */
+	abx500_get_register_interruptible(sysctrl_dev, AB8500_RTC,
+		RTC_CTRL , &val);
+	abx500_set_register_interruptible(sysctrl_dev, AB8500_RTC,
+		RTC_CTRL , (val & ~RTC_ALARM_ENABLE));
+
+	/*
+	 * Android is not using the RTC alarm registers during reboot
+	 * so we borrow them for writing the reason of reset
+	 */
+
+	/* reason[8 LSB] */
+	val = reason & 0xFF;
+	abx500_set_register_interruptible(sysctrl_dev, AB8500_RTC,
+		AB8500_ALARM_MIN_LOW , val);
+
+	/* reason[8 MSB] */
+	val = (reason>>8) & 0xFF;
+	abx500_set_register_interruptible(sysctrl_dev, AB8500_RTC,
+		AB8500_ALARM_MIN_MID , val);
+
+	/* Setting WD timeout to 0 */
+	ab8500_sysctrl_write(AB8500_MAINWDOGTIMER, 0xFF, 0x0);
+
+	/* Setting the parameters to AB8500 WD*/
+	ab8500_sysctrl_write(AB8500_MAINWDOGCTRL, 0xFF, (AB8500_ENABLE_WD |
+		AB8500_WD_RESTART_ON_EXPIRE | AB8500_KICK_WD));
+}
+
 static inline bool valid_bank(u8 bank)
 {
 	return ((bank == AB8500_SYS_CTRL1_BLOCK) ||
@@ -85,7 +153,7 @@ int ab8500_sysctrl_read(u16 reg, u8 *value)
 	u8 bank;
 
 	if (sysctrl_dev == NULL)
-		return -EAGAIN;
+		return -EINVAL;
 
 	bank = (reg >> 8);
 	if (!valid_bank(bank))
@@ -101,7 +169,7 @@ int ab8500_sysctrl_write(u16 reg, u8 mask, u8 value)
 	u8 bank;
 
 	if (sysctrl_dev == NULL)
-		return -EAGAIN;
+		return -EINVAL;
 
 	bank = (reg >> 8);
 	if (!valid_bank(bank))
@@ -114,28 +182,36 @@ EXPORT_SYMBOL(ab8500_sysctrl_write);
 
 static int ab8500_sysctrl_probe(struct platform_device *pdev)
 {
+	struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
 	struct ab8500_platform_data *plat;
 	struct ab8500_sysctrl_platform_data *pdata;
 
-	sysctrl_dev = &pdev->dev;
 	plat = dev_get_platdata(pdev->dev.parent);
+
+	if (!(plat && plat->sysctrl))
+		return -EINVAL;
+
 	if (plat->pm_power_off)
 		pm_power_off = ab8500_power_off;
 
 	pdata = plat->sysctrl;
 
 	if (pdata) {
-		int ret, i, j;
+		int last, ret, i, j;
+
+		if (is_ab8505(ab8500))
+			last = AB8500_SYSCLKREQ4RFCLKBUF;
+		else
+			last = AB8500_SYSCLKREQ8RFCLKBUF;
 
-		for (i = AB8500_SYSCLKREQ1RFCLKBUF;
-		     i <= AB8500_SYSCLKREQ8RFCLKBUF; i++) {
+		for (i = AB8500_SYSCLKREQ1RFCLKBUF; i <= last; i++) {
 			j = i - AB8500_SYSCLKREQ1RFCLKBUF;
 			ret = ab8500_sysctrl_write(i, 0xff,
-						   pdata->initial_req_buf_config[j]);
+					pdata->initial_req_buf_config[j]);
 			dev_dbg(&pdev->dev,
-				"Setting SysClkReq%dRfClkBuf 0x%X\n",
-				j + 1,
-				pdata->initial_req_buf_config[j]);
+					"Setting SysClkReq%dRfClkBuf 0x%X\n",
+					j + 1,
+					pdata->initial_req_buf_config[j]);
 			if (ret < 0) {
 				dev_err(&pdev->dev,
 					"unable to set sysClkReq%dRfClkBuf: "
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 9e00c389e777..07e1a8f8d03e 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -353,13 +353,6 @@ config BATTERY_GOLDFISH
 	  Say Y to enable support for the battery and AC power in the
 	  Goldfish emulator.
 
-config CHARGER_PM2301
-	bool "PM2301 Battery Charger Driver"
-	depends on AB8500_BM
-	help
-	  Say Y to include support for PM2301 charger driver.
-	  Depends on AB8500 battery management core.
-
 source "drivers/power/reset/Kconfig"
 
 endif # POWER_SUPPLY
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index 3f66436af45c..eb520ea74970 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -39,7 +39,7 @@ obj-$(CONFIG_CHARGER_PCF50633)	+= pcf50633-charger.o
 obj-$(CONFIG_BATTERY_JZ4740)	+= jz4740-battery.o
 obj-$(CONFIG_BATTERY_INTEL_MID)	+= intel_mid_battery.o
 obj-$(CONFIG_BATTERY_RX51)	+= rx51_battery.o
-obj-$(CONFIG_AB8500_BM)		+= ab8500_bmdata.o ab8500_charger.o ab8500_fg.o ab8500_btemp.o abx500_chargalg.o
+obj-$(CONFIG_AB8500_BM)		+= ab8500_bmdata.o ab8500_charger.o ab8500_fg.o ab8500_btemp.o abx500_chargalg.o pm2301_charger.o
 obj-$(CONFIG_CHARGER_ISP1704)	+= isp1704_charger.o
 obj-$(CONFIG_CHARGER_MAX8903)	+= max8903_charger.o
 obj-$(CONFIG_CHARGER_TWL4030)	+= twl4030_charger.o
@@ -47,7 +47,6 @@ obj-$(CONFIG_CHARGER_LP8727)	+= lp8727_charger.o
 obj-$(CONFIG_CHARGER_LP8788)	+= lp8788-charger.o
 obj-$(CONFIG_CHARGER_GPIO)	+= gpio-charger.o
 obj-$(CONFIG_CHARGER_MANAGER)	+= charger-manager.o
-obj-$(CONFIG_CHARGER_PM2301)	+= pm2301_charger.o
 obj-$(CONFIG_CHARGER_MAX8997)	+= max8997_charger.o
 obj-$(CONFIG_CHARGER_MAX8998)	+= max8998_charger.o
 obj-$(CONFIG_CHARGER_BQ2415X)	+= bq2415x_charger.o
diff --git a/drivers/power/ab8500_bmdata.c b/drivers/power/ab8500_bmdata.c
index 7a96c0650fbb..85742a6d29ff 100644
--- a/drivers/power/ab8500_bmdata.c
+++ b/drivers/power/ab8500_bmdata.c
@@ -407,15 +407,27 @@ static const struct abx500_fg_parameters fg = {
 	.battok_raising_th_sel1 = 2860,
 	.maint_thres = 95,
 	.user_cap_limit = 15,
+	.pcut_enable = 1,
+	.pcut_max_time = 127,
+	.pcut_flag_time = 112,
+	.pcut_max_restart = 15,
+	.pcut_debounce_time = 2,
 };
 
-static const struct abx500_maxim_parameters maxi_params = {
+static const struct abx500_maxim_parameters ab8500_maxi_params = {
 	.ena_maxi = true,
 	.chg_curr = 910,
 	.wait_cycles = 10,
 	.charger_curr_step = 100,
 };
 
+static const struct abx500_maxim_parameters abx540_maxi_params = {
+        .ena_maxi = true,
+        .chg_curr = 3000,
+        .wait_cycles = 10,
+        .charger_curr_step = 200,
+};
+
 static const struct abx500_bm_charger_parameters chg = {
 	.usb_volt_max		= 5500,
 	.usb_curr_max		= 1500,
@@ -423,6 +435,46 @@ static const struct abx500_bm_charger_parameters chg = {
 	.ac_curr_max		= 1500,
 };
 
+/*
+ * This array maps the raw hex value to charger output current used by the
+ * AB8500 values
+ */
+static int ab8500_charge_output_curr_map[] = {
+        100,    200,    300,    400,    500,    600,    700,    800,
+        900,    1000,   1100,   1200,   1300,   1400,   1500,   1500,
+};
+
+static int ab8540_charge_output_curr_map[] = {
+        0,      0,      0,      75,     100,    125,    150,    175,
+        200,    225,    250,    275,    300,    325,    350,    375,
+        400,    425,    450,    475,    500,    525,    550,    575,
+        600,    625,    650,    675,    700,    725,    750,    775,
+        800,    825,    850,    875,    900,    925,    950,    975,
+        1000,   1025,   1050,   1075,   1100,   1125,   1150,   1175,
+        1200,   1225,   1250,   1275,   1300,   1325,   1350,   1375,
+        1400,   1425,   1450,   1500,   1600,   1700,   1900,   2000,
+};
+
+/*
+ * This array maps the raw hex value to charger input current used by the
+ * AB8500 values
+ */
+static int ab8500_charge_input_curr_map[] = {
+        50,     98,     193,    290,    380,    450,    500,    600,
+        700,    800,    900,    1000,   1100,   1300,   1400,   1500,
+};
+
+static int ab8540_charge_input_curr_map[] = {
+        25,     50,     75,     100,    125,    150,    175,    200,
+        225,    250,    275,    300,    325,    350,    375,    400,
+        425,    450,    475,    500,    525,    550,    575,    600,
+        625,    650,    675,    700,    725,    750,    775,    800,
+        825,    850,    875,    900,    925,    950,    975,    1000,
+        1025,   1050,   1075,   1100,   1125,   1150,   1175,   1200,
+        1225,   1250,   1275,   1300,   1325,   1350,   1375,   1400,
+        1425,   1450,   1475,   1500,   1500,   1500,   1500,   1500,
+};
+
 struct abx500_bm_data ab8500_bm_data = {
 	.temp_under             = 3,
 	.temp_low               = 8,
@@ -442,15 +494,53 @@ struct abx500_bm_data ab8500_bm_data = {
 	.fg_res                 = 100,
 	.cap_levels             = &cap_levels,
 	.bat_type               = bat_type_thermistor,
-	.n_btypes               = 3,
+	.n_btypes               = ARRAY_SIZE(bat_type_thermistor),
 	.batt_id                = 0,
 	.interval_charging      = 5,
 	.interval_not_charging  = 120,
 	.temp_hysteresis        = 3,
 	.gnd_lift_resistance    = 34,
-	.maxi                   = &maxi_params,
+	.chg_output_curr        = ab8500_charge_output_curr_map,
+	.n_chg_out_curr         = ARRAY_SIZE(ab8500_charge_output_curr_map),
+	.maxi                   = &ab8500_maxi_params,
 	.chg_params             = &chg,
 	.fg_params              = &fg,
+        .chg_input_curr         = ab8500_charge_input_curr_map,
+        .n_chg_in_curr          = ARRAY_SIZE(ab8500_charge_input_curr_map),
+};
+
+struct abx500_bm_data ab8540_bm_data = {
+        .temp_under             = 3,
+        .temp_low               = 8,
+        .temp_high              = 43,
+        .temp_over              = 48,
+        .main_safety_tmr_h      = 4,
+        .temp_interval_chg      = 20,
+        .temp_interval_nochg    = 120,
+        .usb_safety_tmr_h       = 4,
+        .bkup_bat_v             = BUP_VCH_SEL_2P6V,
+        .bkup_bat_i             = BUP_ICH_SEL_150UA,
+        .no_maintenance         = false,
+        .capacity_scaling       = false,
+        .adc_therm              = ABx500_ADC_THERM_BATCTRL,
+        .chg_unknown_bat        = false,
+        .enable_overshoot       = false,
+        .fg_res                 = 100,
+        .cap_levels             = &cap_levels,
+        .bat_type               = bat_type_thermistor,
+        .n_btypes               = ARRAY_SIZE(bat_type_thermistor),
+        .batt_id                = 0,
+        .interval_charging      = 5,
+        .interval_not_charging  = 120,
+        .temp_hysteresis        = 3,
+        .gnd_lift_resistance    = 0,
+        .maxi                   = &abx540_maxi_params,
+        .chg_params             = &chg,
+        .fg_params              = &fg,
+        .chg_output_curr        = ab8540_charge_output_curr_map,
+        .n_chg_out_curr         = ARRAY_SIZE(ab8540_charge_output_curr_map),
+        .chg_input_curr         = ab8540_charge_input_curr_map,
+        .n_chg_in_curr          = ARRAY_SIZE(ab8540_charge_input_curr_map),
 };
 
 int ab8500_bm_of_probe(struct device *dev,
diff --git a/drivers/power/ab8500_btemp.c b/drivers/power/ab8500_btemp.c
index 07689064996e..a9486f1a1b5b 100644
--- a/drivers/power/ab8500_btemp.c
+++ b/drivers/power/ab8500_btemp.c
@@ -42,6 +42,9 @@
 #define BTEMP_BATCTRL_CURR_SRC_16UA	16
 #define BTEMP_BATCTRL_CURR_SRC_18UA	18
 
+#define BTEMP_BATCTRL_CURR_SRC_60UA	60
+#define BTEMP_BATCTRL_CURR_SRC_120UA	120
+
 #define to_ab8500_btemp_device_info(x) container_of((x), \
 	struct ab8500_btemp, btemp_psy);
 
@@ -76,8 +79,8 @@ struct ab8500_btemp_ranges {
  * @dev:		Pointer to the structure device
  * @node:		List of AB8500 BTEMPs, hence prepared for reentrance
  * @curr_source:	What current source we use, in uA
- * @bat_temp:		Battery temperature in degree Celcius
- * @prev_bat_temp	Last dispatched battery temperature
+ * @bat_temp:		Dispatched battery temperature in degree Celcius
+ * @prev_bat_temp	Last measured battery temperature in degree Celcius
  * @parent:		Pointer to the struct ab8500
  * @gpadc:		Pointer to the struct gpadc
  * @fg:			Pointer to the struct fg
@@ -155,7 +158,7 @@ static int ab8500_btemp_batctrl_volt_to_res(struct ab8500_btemp *di,
 	if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL) {
 		/*
 		 * If the battery has internal NTC, we use the current
-		 * source to calculate the resistance, 7uA or 20uA
+		 * source to calculate the resistance.
 		 */
 		rbs = (v_batctrl * 1000
 		       - di->bm->gnd_lift_resistance * inst_curr)
@@ -216,7 +219,12 @@ static int ab8500_btemp_curr_source_enable(struct ab8500_btemp *di,
 	/* Only do this for batteries with internal NTC */
 	if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL && enable) {
 
-		if (is_ab9540(di->parent) || is_ab8505(di->parent)) {
+		if (is_ab8540(di->parent)) {
+			if (di->curr_source == BTEMP_BATCTRL_CURR_SRC_60UA)
+				curr = BAT_CTRL_60U_ENA;
+			else
+				curr = BAT_CTRL_120U_ENA;
+		} else if (is_ab9540(di->parent) || is_ab8505(di->parent)) {
 			if (di->curr_source == BTEMP_BATCTRL_CURR_SRC_16UA)
 				curr = BAT_CTRL_16U_ENA;
 			else
@@ -257,7 +265,14 @@ static int ab8500_btemp_curr_source_enable(struct ab8500_btemp *di,
 	} else if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL && !enable) {
 		dev_dbg(di->dev, "Disable BATCTRL curr source\n");
 
-		if (is_ab9540(di->parent) || is_ab8505(di->parent)) {
+		if (is_ab8540(di->parent)) {
+			/* Write 0 to the curr bits */
+			ret = abx500_mask_and_set_register_interruptible(
+				di->dev,
+				AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE,
+				BAT_CTRL_60U_ENA | BAT_CTRL_120U_ENA,
+				~(BAT_CTRL_60U_ENA | BAT_CTRL_120U_ENA));
+		} else if (is_ab9540(di->parent) || is_ab8505(di->parent)) {
 			/* Write 0 to the curr bits */
 			ret = abx500_mask_and_set_register_interruptible(
 				di->dev,
@@ -314,7 +329,13 @@ static int ab8500_btemp_curr_source_enable(struct ab8500_btemp *di,
 	 * if we got an error above
 	 */
 disable_curr_source:
-	if (is_ab9540(di->parent) || is_ab8505(di->parent)) {
+	if (is_ab8540(di->parent)) {
+		/* Write 0 to the curr bits */
+		ret = abx500_mask_and_set_register_interruptible(di->dev,
+			AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE,
+			BAT_CTRL_60U_ENA | BAT_CTRL_120U_ENA,
+			~(BAT_CTRL_60U_ENA | BAT_CTRL_120U_ENA));
+	} else if (is_ab9540(di->parent) || is_ab8505(di->parent)) {
 		/* Write 0 to the curr bits */
 		ret = abx500_mask_and_set_register_interruptible(di->dev,
 			AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE,
@@ -541,7 +562,9 @@ static int ab8500_btemp_id(struct ab8500_btemp *di)
 {
 	int res;
 	u8 i;
-	if (is_ab9540(di->parent) || is_ab8505(di->parent))
+	if (is_ab8540(di->parent))
+		di->curr_source = BTEMP_BATCTRL_CURR_SRC_60UA;
+	else if (is_ab9540(di->parent) || is_ab8505(di->parent))
 		di->curr_source = BTEMP_BATCTRL_CURR_SRC_16UA;
 	else
 		di->curr_source = BTEMP_BATCTRL_CURR_SRC_7UA;
@@ -579,12 +602,17 @@ static int ab8500_btemp_id(struct ab8500_btemp *di)
 
 	/*
 	 * We only have to change current source if the
-	 * detected type is Type 1, else we use the 7uA source
+	 * detected type is Type 1.
 	 */
 	if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL &&
-			di->bm->batt_id == 1) {
-		if (is_ab9540(di->parent) || is_ab8505(di->parent)) {
-			dev_dbg(di->dev, "Set BATCTRL current source to 16uA\n");
+	    di->bm->batt_id == 1) {
+		if (is_ab8540(di->parent)) {
+			dev_dbg(di->dev,
+				"Set BATCTRL current source to 60uA\n");
+			di->curr_source = BTEMP_BATCTRL_CURR_SRC_60UA;
+		} else if (is_ab9540(di->parent) || is_ab8505(di->parent)) {
+			dev_dbg(di->dev,
+				"Set BATCTRL current source to 16uA\n");
 			di->curr_source = BTEMP_BATCTRL_CURR_SRC_16UA;
 		} else {
 			dev_dbg(di->dev, "Set BATCTRL current source to 20uA\n");
@@ -604,22 +632,37 @@ static int ab8500_btemp_id(struct ab8500_btemp *di)
 static void ab8500_btemp_periodic_work(struct work_struct *work)
 {
 	int interval;
+	int bat_temp;
 	struct ab8500_btemp *di = container_of(work,
 		struct ab8500_btemp, btemp_periodic_work.work);
 
 	if (!di->initialized) {
-		di->initialized = true;
 		/* Identify the battery */
 		if (ab8500_btemp_id(di) < 0)
 			dev_warn(di->dev, "failed to identify the battery\n");
 	}
 
-	di->bat_temp = ab8500_btemp_measure_temp(di);
-
-	if (di->bat_temp != di->prev_bat_temp) {
-		di->prev_bat_temp = di->bat_temp;
+	bat_temp = ab8500_btemp_measure_temp(di);
+	/*
+	 * Filter battery temperature.
+	 * Allow direct updates on temperature only if two samples result in
+	 * same temperature. Else only allow 1 degree change from previous
+	 * reported value in the direction of the new measurement.
+	 */
+	if ((bat_temp == di->prev_bat_temp) || !di->initialized) {
+		if ((di->bat_temp != di->prev_bat_temp) || !di->initialized) {
+			di->initialized = true;
+			di->bat_temp = bat_temp;
+			power_supply_changed(&di->btemp_psy);
+		}
+	} else if (bat_temp < di->prev_bat_temp) {
+		di->bat_temp--;
+		power_supply_changed(&di->btemp_psy);
+	} else if (bat_temp > di->prev_bat_temp) {
+		di->bat_temp++;
 		power_supply_changed(&di->btemp_psy);
 	}
+	di->prev_bat_temp = bat_temp;
 
 	if (di->events.ac_conn || di->events.usb_conn)
 		interval = di->bm->temp_interval_chg;
diff --git a/drivers/power/ab8500_charger.c b/drivers/power/ab8500_charger.c
index 24b30b7ea5ca..a558318b169c 100644
--- a/drivers/power/ab8500_charger.c
+++ b/drivers/power/ab8500_charger.c
@@ -15,6 +15,7 @@
 #include <linux/device.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
+#include <linux/notifier.h>
 #include <linux/slab.h>
 #include <linux/platform_device.h>
 #include <linux/power_supply.h>
@@ -52,10 +53,15 @@
 #define VBUS_DET_DBNC100		0x02
 #define VBUS_DET_DBNC1			0x01
 #define OTP_ENABLE_WD			0x01
+#define DROP_COUNT_RESET		0x01
+#define USB_CH_DET			0x01
 
 #define MAIN_CH_INPUT_CURR_SHIFT	4
 #define VBUS_IN_CURR_LIM_SHIFT		4
+#define AB8540_VBUS_IN_CURR_LIM_SHIFT	2
 #define AUTO_VBUS_IN_CURR_LIM_SHIFT	4
+#define AB8540_AUTO_VBUS_IN_CURR_MASK	0x3F
+#define VBUS_IN_CURR_LIM_RETRY_SET_TIME	30 /* seconds */
 
 #define LED_INDICATOR_PWM_ENA		0x01
 #define LED_INDICATOR_PWM_DIS		0x00
@@ -77,7 +83,9 @@
 
 /* UsbLineStatus register bit masks */
 #define AB8500_USB_LINK_STATUS		0x78
+#define AB8505_USB_LINK_STATUS		0xF8
 #define AB8500_STD_HOST_SUSP		0x18
+#define USB_LINK_STATUS_SHIFT		3
 
 /* Watchdog timeout constant */
 #define WD_TIMER			0x30 /* 4min */
@@ -96,6 +104,10 @@
 #define AB8500_SW_CONTROL_FALLBACK	0x03
 /* Wait for enumeration before charing in us */
 #define WAIT_ACA_RID_ENUMERATION	(5 * 1000)
+/*External charger control*/
+#define AB8500_SYS_CHARGER_CONTROL_REG		0x52
+#define EXTERNAL_CHARGER_DISABLE_REG_VAL	0x03
+#define EXTERNAL_CHARGER_ENABLE_REG_VAL		0x07
 
 /* UsbLineStatus register - usb types */
 enum ab8500_charger_link_status {
@@ -196,10 +208,15 @@ struct ab8500_charger_usb_state {
 	spinlock_t usb_lock;
 };
 
+struct ab8500_charger_max_usb_in_curr {
+	int usb_type_max;
+	int set_max;
+	int calculated_max;
+};
+
 /**
  * struct ab8500_charger - ab8500 Charger device information
  * @dev:		Pointer to the structure device
- * @max_usb_in_curr:	Max USB charger input current
  * @vbus_detected:	VBUS detected
  * @vbus_detected_start:
  *			VBUS detected during startup
@@ -214,7 +231,6 @@ struct ab8500_charger_usb_state {
  * @autopower		Indicate if we should have automatic pwron after pwrloss
  * @autopower_cfg	platform specific power config support for "pwron after pwrloss"
  * @invalid_charger_detect_state State when forcing AB to use invalid charger
- * @is_usb_host:	Indicate if last detected USB type is host
  * @is_aca_rid:		Incicate if accessory is ACA type
  * @current_stepping_sessions:
  *			Counter for current stepping sessions
@@ -223,6 +239,7 @@ struct ab8500_charger_usb_state {
  * @bm:           	Platform specific battery management information
  * @flags:		Structure for information about events triggered
  * @usb_state:		Structure for usb stack information
+ * @max_usb_in_curr:	Max USB charger input current
  * @ac_chg:		AC charger power supply
  * @usb_chg:		USB charger power supply
  * @ac:			Structure that holds the AC charger properties
@@ -254,7 +271,6 @@ struct ab8500_charger_usb_state {
  */
 struct ab8500_charger {
 	struct device *dev;
-	int max_usb_in_curr;
 	bool vbus_detected;
 	bool vbus_detected_start;
 	bool ac_conn;
@@ -266,7 +282,6 @@ struct ab8500_charger {
 	bool autopower;
 	bool autopower_cfg;
 	int invalid_charger_detect_state;
-	bool is_usb_host;
 	int is_aca_rid;
 	atomic_t current_stepping_sessions;
 	struct ab8500 *parent;
@@ -274,6 +289,7 @@ struct ab8500_charger {
 	struct abx500_bm_data *bm;
 	struct ab8500_charger_event_flags flags;
 	struct ab8500_charger_usb_state usb_state;
+	struct ab8500_charger_max_usb_in_curr max_usb_in_curr;
 	struct ux500_charger ac_chg;
 	struct ux500_charger usb_chg;
 	struct ab8500_charger_info ac;
@@ -415,13 +431,18 @@ static void ab8500_charger_set_usb_connected(struct ab8500_charger *di,
 	if (connected != di->usb.charger_connected) {
 		dev_dbg(di->dev, "USB connected:%i\n", connected);
 		di->usb.charger_connected = connected;
+
+		if (!connected)
+			di->flags.vbus_drop_end = false;
+
 		sysfs_notify(&di->usb_chg.psy.dev->kobj, NULL, "present");
 
 		if (connected) {
 			mutex_lock(&di->charger_attached_mutex);
 			mutex_unlock(&di->charger_attached_mutex);
 
-			queue_delayed_work(di->charger_wq,
+			if (is_ab8500(di->parent))
+				queue_delayed_work(di->charger_wq,
 					   &di->usb_charger_attached_work,
 					   HZ);
 		} else {
@@ -668,23 +689,19 @@ static int ab8500_charger_max_usb_curr(struct ab8500_charger *di,
 	case USB_STAT_STD_HOST_C_S:
 		dev_dbg(di->dev, "USB Type - Standard host is "
 			"detected through USB driver\n");
-		di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5;
-		di->is_usb_host = true;
+		di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5;
 		di->is_aca_rid = 0;
 		break;
 	case USB_STAT_HOST_CHG_HS_CHIRP:
-		di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5;
-		di->is_usb_host = true;
+		di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5;
 		di->is_aca_rid = 0;
 		break;
 	case USB_STAT_HOST_CHG_HS:
-		di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5;
-		di->is_usb_host = true;
+		di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5;
 		di->is_aca_rid = 0;
 		break;
 	case USB_STAT_ACA_RID_C_HS:
-		di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P9;
-		di->is_usb_host = false;
+		di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P9;
 		di->is_aca_rid = 0;
 		break;
 	case USB_STAT_ACA_RID_A:
@@ -693,8 +710,7 @@ static int ab8500_charger_max_usb_curr(struct ab8500_charger *di,
 		 * can consume (900mA). Closest level is 500mA
 		 */
 		dev_dbg(di->dev, "USB_STAT_ACA_RID_A detected\n");
-		di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5;
-		di->is_usb_host = false;
+		di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5;
 		di->is_aca_rid = 1;
 		break;
 	case USB_STAT_ACA_RID_B:
@@ -702,38 +718,35 @@ static int ab8500_charger_max_usb_curr(struct ab8500_charger *di,
 		 * Dedicated charger level minus 120mA (20mA for ACA and
 		 * 100mA for potential accessory). Closest level is 1300mA
 		 */
-		di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P3;
+		di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_1P3;
 		dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", link_status,
-				di->max_usb_in_curr);
-		di->is_usb_host = false;
+				di->max_usb_in_curr.usb_type_max);
 		di->is_aca_rid = 1;
 		break;
 	case USB_STAT_HOST_CHG_NM:
-		di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5;
-		di->is_usb_host = true;
+		di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5;
 		di->is_aca_rid = 0;
 		break;
 	case USB_STAT_DEDICATED_CHG:
-		di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P5;
-		di->is_usb_host = false;
+		di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_1P5;
 		di->is_aca_rid = 0;
 		break;
 	case USB_STAT_ACA_RID_C_HS_CHIRP:
 	case USB_STAT_ACA_RID_C_NM:
-		di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P5;
-		di->is_usb_host = false;
+		di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_1P5;
 		di->is_aca_rid = 1;
 		break;
 	case USB_STAT_NOT_CONFIGURED:
 		if (di->vbus_detected) {
 			di->usb_device_is_unrecognised = true;
 			dev_dbg(di->dev, "USB Type - Legacy charger.\n");
-			di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P5;
+			di->max_usb_in_curr.usb_type_max =
+						USB_CH_IP_CUR_LVL_1P5;
 			break;
 		}
 	case USB_STAT_HM_IDGND:
 		dev_err(di->dev, "USB Type - Charging not allowed\n");
-		di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P05;
+		di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P05;
 		ret = -ENXIO;
 		break;
 	case USB_STAT_RESERVED:
@@ -743,12 +756,13 @@ static int ab8500_charger_max_usb_curr(struct ab8500_charger *di,
 						"VBUS has collapsed\n");
 			ret = -ENXIO;
 			break;
-		}
-		if (is_ab9540(di->parent) || is_ab8505(di->parent)) {
+		} else {
 			dev_dbg(di->dev, "USB Type - Charging not allowed\n");
-			di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P05;
+			di->max_usb_in_curr.usb_type_max =
+						USB_CH_IP_CUR_LVL_0P05;
 			dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d",
-					link_status, di->max_usb_in_curr);
+				link_status,
+				di->max_usb_in_curr.usb_type_max);
 			ret = -ENXIO;
 			break;
 		}
@@ -757,23 +771,24 @@ static int ab8500_charger_max_usb_curr(struct ab8500_charger *di,
 	case USB_STAT_CARKIT_2:
 	case USB_STAT_ACA_DOCK_CHARGER:
 	case USB_STAT_CHARGER_LINE_1:
-		di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5;
+		di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5;
 		dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", link_status,
-				di->max_usb_in_curr);
+				di->max_usb_in_curr.usb_type_max);
 	case USB_STAT_NOT_VALID_LINK:
 		dev_err(di->dev, "USB Type invalid - try charging anyway\n");
-		di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5;
+		di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5;
 		break;
 
 	default:
 		dev_err(di->dev, "USB Type - Unknown\n");
-		di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P05;
+		di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P05;
 		ret = -ENXIO;
 		break;
 	};
 
+	di->max_usb_in_curr.set_max = di->max_usb_in_curr.usb_type_max;
 	dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d",
-		link_status, di->max_usb_in_curr);
+		link_status, di->max_usb_in_curr.set_max);
 
 	return ret;
 }
@@ -796,21 +811,22 @@ static int ab8500_charger_read_usb_type(struct ab8500_charger *di)
 		dev_err(di->dev, "%s ab8500 read failed\n", __func__);
 		return ret;
 	}
-	if (is_ab8500(di->parent)) {
+	if (is_ab8500(di->parent))
 		ret = abx500_get_register_interruptible(di->dev, AB8500_USB,
-				AB8500_USB_LINE_STAT_REG, &val);
-	} else {
-		if (is_ab9540(di->parent) || is_ab8505(di->parent))
-			ret = abx500_get_register_interruptible(di->dev,
-				AB8500_USB, AB8500_USB_LINK1_STAT_REG, &val);
-	}
+			AB8500_USB_LINE_STAT_REG, &val);
+	else
+		ret = abx500_get_register_interruptible(di->dev,
+			AB8500_USB, AB8500_USB_LINK1_STAT_REG, &val);
 	if (ret < 0) {
 		dev_err(di->dev, "%s ab8500 read failed\n", __func__);
 		return ret;
 	}
 
 	/* get the USB type */
-	val = (val & AB8500_USB_LINK_STATUS) >> 3;
+	if (is_ab8500(di->parent))
+		val = (val & AB8500_USB_LINK_STATUS) >> USB_LINK_STATUS_SHIFT;
+	else
+		val = (val & AB8505_USB_LINK_STATUS) >> USB_LINK_STATUS_SHIFT;
 	ret = ab8500_charger_max_usb_curr(di,
 		(enum ab8500_charger_link_status) val);
 
@@ -865,7 +881,12 @@ static int ab8500_charger_detect_usb_type(struct ab8500_charger *di)
 		 */
 
 		/* get the USB type */
-		val = (val & AB8500_USB_LINK_STATUS) >> 3;
+		if (is_ab8500(di->parent))
+			val = (val & AB8500_USB_LINK_STATUS) >>
+							USB_LINK_STATUS_SHIFT;
+		else
+			val = (val & AB8505_USB_LINK_STATUS) >>
+							USB_LINK_STATUS_SHIFT;
 		if (val)
 			break;
 	}
@@ -960,51 +981,6 @@ static int ab8500_charger_voltage_map[] = {
 	4600 ,
 };
 
-/*
- * This array maps the raw hex value to charger current used by the AB8500
- * Values taken from the UM0836
- */
-static int ab8500_charger_current_map[] = {
-	100 ,
-	200 ,
-	300 ,
-	400 ,
-	500 ,
-	600 ,
-	700 ,
-	800 ,
-	900 ,
-	1000 ,
-	1100 ,
-	1200 ,
-	1300 ,
-	1400 ,
-	1500 ,
-};
-
-/*
- * This array maps the raw hex value to VBUS input current used by the AB8500
- * Values taken from the UM0836
- */
-static int ab8500_charger_vbus_in_curr_map[] = {
-	USB_CH_IP_CUR_LVL_0P05,
-	USB_CH_IP_CUR_LVL_0P09,
-	USB_CH_IP_CUR_LVL_0P19,
-	USB_CH_IP_CUR_LVL_0P29,
-	USB_CH_IP_CUR_LVL_0P38,
-	USB_CH_IP_CUR_LVL_0P45,
-	USB_CH_IP_CUR_LVL_0P5,
-	USB_CH_IP_CUR_LVL_0P6,
-	USB_CH_IP_CUR_LVL_0P7,
-	USB_CH_IP_CUR_LVL_0P8,
-	USB_CH_IP_CUR_LVL_0P9,
-	USB_CH_IP_CUR_LVL_1P0,
-	USB_CH_IP_CUR_LVL_1P1,
-	USB_CH_IP_CUR_LVL_1P3,
-	USB_CH_IP_CUR_LVL_1P4,
-	USB_CH_IP_CUR_LVL_1P5,
-};
-
 static int ab8500_voltage_to_regval(int voltage)
 {
 	int i;
@@ -1026,41 +1002,41 @@ static int ab8500_voltage_to_regval(int voltage)
 		return -1;
 }
 
-static int ab8500_current_to_regval(int curr)
+static int ab8500_current_to_regval(struct ab8500_charger *di, int curr)
 {
 	int i;
 
-	if (curr < ab8500_charger_current_map[0])
+	if (curr < di->bm->chg_output_curr[0])
 		return 0;
 
-	for (i = 0; i < ARRAY_SIZE(ab8500_charger_current_map); i++) {
-		if (curr < ab8500_charger_current_map[i])
+	for (i = 0; i < di->bm->n_chg_out_curr; i++) {
+		if (curr < di->bm->chg_output_curr[i])
 			return i - 1;
 	}
 
 	/* If not last element, return error */
-	i = ARRAY_SIZE(ab8500_charger_current_map) - 1;
-	if (curr == ab8500_charger_current_map[i])
+	i = di->bm->n_chg_out_curr - 1;
+	if (curr == di->bm->chg_output_curr[i])
 		return i;
 	else
 		return -1;
 }
 
-static int ab8500_vbus_in_curr_to_regval(int curr)
+static int ab8500_vbus_in_curr_to_regval(struct ab8500_charger *di, int curr)
 {
 	int i;
 
-	if (curr < ab8500_charger_vbus_in_curr_map[0])
+	if (curr < di->bm->chg_input_curr[0])
 		return 0;
 
-	for (i = 0; i < ARRAY_SIZE(ab8500_charger_vbus_in_curr_map); i++) {
-		if (curr < ab8500_charger_vbus_in_curr_map[i])
+	for (i = 0; i < di->bm->n_chg_in_curr; i++) {
+		if (curr < di->bm->chg_input_curr[i])
 			return i - 1;
 	}
 
 	/* If not last element, return error */
-	i = ARRAY_SIZE(ab8500_charger_vbus_in_curr_map) - 1;
-	if (curr == ab8500_charger_vbus_in_curr_map[i])
+	i = di->bm->n_chg_in_curr - 1;
+	if (curr == di->bm->chg_input_curr[i])
 		return i;
 	else
 		return -1;
@@ -1077,28 +1053,48 @@ static int ab8500_vbus_in_curr_to_regval(int curr)
  */
 static int ab8500_charger_get_usb_cur(struct ab8500_charger *di)
 {
+	int ret = 0;
 	switch (di->usb_state.usb_current) {
 	case 100:
-		di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P09;
+		di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P09;
 		break;
 	case 200:
-		di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P19;
+		di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P19;
 		break;
 	case 300:
-		di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P29;
+		di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P29;
 		break;
 	case 400:
-		di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P38;
+		di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P38;
 		break;
 	case 500:
-		di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5;
+		di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5;
 		break;
 	default:
-		di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P05;
-		return -1;
+		di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P05;
+		ret = -EPERM;
 		break;
 	};
-	return 0;
+	di->max_usb_in_curr.set_max = di->max_usb_in_curr.usb_type_max;
+	return ret;
+}
+
+/**
+ * ab8500_charger_check_continue_stepping() - Check to allow stepping
+ * @di:		pointer to the ab8500_charger structure
+ * @reg:	select what charger register to check
+ *
+ * Check if current stepping should be allowed to continue.
+ * Checks if charger source has not collapsed. If it has, further stepping
+ * is not allowed.
+ */
+static bool ab8500_charger_check_continue_stepping(struct ab8500_charger *di,
+						   int reg)
+{
+	if (reg == AB8500_USBCH_IPT_CRNTLVL_REG)
+		return !di->flags.vbus_drop_end;
+	else
+		return true;
 }
 
 /**
@@ -1118,7 +1114,7 @@ static int ab8500_charger_set_current(struct ab8500_charger *di,
 	int ich, int reg)
 {
 	int ret = 0;
-	int auto_curr_index, curr_index, prev_curr_index, shift_value, i;
+	int curr_index, prev_curr_index, shift_value, i;
 	u8 reg_value;
 	u32 step_udelay;
 	bool no_stepping = false;
@@ -1136,39 +1132,27 @@ static int ab8500_charger_set_current(struct ab8500_charger *di,
 	case AB8500_MCH_IPT_CURLVL_REG:
 		shift_value = MAIN_CH_INPUT_CURR_SHIFT;
 		prev_curr_index = (reg_value >> shift_value);
-		curr_index = ab8500_current_to_regval(ich);
+		curr_index = ab8500_current_to_regval(di, ich);
 		step_udelay = STEP_UDELAY;
 		if (!di->ac.charger_connected)
 			no_stepping = true;
 		break;
 	case AB8500_USBCH_IPT_CRNTLVL_REG:
-		shift_value = VBUS_IN_CURR_LIM_SHIFT;
+		if (is_ab8540(di->parent))
+			shift_value = AB8540_VBUS_IN_CURR_LIM_SHIFT;
+		else
+			shift_value = VBUS_IN_CURR_LIM_SHIFT;
 		prev_curr_index = (reg_value >> shift_value);
-		curr_index = ab8500_vbus_in_curr_to_regval(ich);
+		curr_index = ab8500_vbus_in_curr_to_regval(di, ich);
 		step_udelay = STEP_UDELAY * 100;
 
-		ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
-					AB8500_CH_USBCH_STAT2_REG, &reg_value);
-		if (ret < 0) {
-			dev_err(di->dev, "%s read failed\n", __func__);
-			goto exit_set_current;
-		}
-		auto_curr_index =
-			reg_value >> AUTO_VBUS_IN_CURR_LIM_SHIFT;
-
-		dev_dbg(di->dev, "%s Auto VBUS curr is %d mA\n",
-			__func__,
-			ab8500_charger_vbus_in_curr_map[auto_curr_index]);
-
-		prev_curr_index = min(prev_curr_index, auto_curr_index);
-
 		if (!di->usb.charger_connected)
 			no_stepping = true;
 		break;
 	case AB8500_CH_OPT_CRNTLVL_REG:
 		shift_value = 0;
 		prev_curr_index = (reg_value >> shift_value);
-		curr_index = ab8500_current_to_regval(ich);
+		curr_index = ab8500_current_to_regval(di, ich);
 		step_udelay = STEP_UDELAY;
 		if (curr_index && (curr_index - prev_curr_index) > 1)
 			step_udelay *= 100;
@@ -1219,7 +1203,8 @@ static int ab8500_charger_set_current(struct ab8500_charger *di,
 				usleep_range(step_udelay, step_udelay * 2);
 		}
 	} else {
-		for (i = prev_curr_index + 1; i <= curr_index; i++) {
+		bool allow = true;
+		for (i = prev_curr_index + 1; i <= curr_index && allow; i++) {
 			dev_dbg(di->dev, "curr change_2 to: %x for 0x%02x\n",
 				(u8)i << shift_value, reg);
 			ret = abx500_set_register_interruptible(di->dev,
@@ -1230,6 +1215,8 @@ static int ab8500_charger_set_current(struct ab8500_charger *di,
 			}
 			if (i != curr_index)
 				usleep_range(step_udelay, step_udelay * 2);
+
+			allow = ab8500_charger_check_continue_stepping(di, reg);
 		}
 	}
 
@@ -1255,6 +1242,11 @@ static int ab8500_charger_set_vbus_in_curr(struct ab8500_charger *di,
 
 	/* We should always use to lowest current limit */
 	min_value = min(di->bm->chg_params->usb_curr_max, ich_in);
+	if (di->max_usb_in_curr.set_max > 0)
+		min_value = min(di->max_usb_in_curr.set_max, min_value);
+
+	if (di->usb_state.usb_current >= 0)
+		min_value = min(di->usb_state.usb_current, min_value);
 
 	switch (min_value) {
 	case 100:
@@ -1400,8 +1392,8 @@ static int ab8500_charger_ac_en(struct ux500_charger *charger,
 
 		/* Check if the requested voltage or current is valid */
 		volt_index = ab8500_voltage_to_regval(vset);
-		curr_index = ab8500_current_to_regval(iset);
-		input_curr_index = ab8500_current_to_regval(
+		curr_index = ab8500_current_to_regval(di, iset);
+		input_curr_index = ab8500_current_to_regval(di,
 			di->bm->chg_params->ac_curr_max);
 		if (volt_index < 0 || curr_index < 0 || input_curr_index < 0) {
 			dev_err(di->dev,
@@ -1572,7 +1564,7 @@ static int ab8500_charger_usb_en(struct ux500_charger *charger,
 
 		/* Check if the requested voltage or current is valid */
 		volt_index = ab8500_voltage_to_regval(vset);
-		curr_index = ab8500_current_to_regval(ich_out);
+		curr_index = ab8500_current_to_regval(di, ich_out);
 		if (volt_index < 0 || curr_index < 0) {
 			dev_err(di->dev,
 				"Charger voltage or current too high, "
@@ -1609,7 +1601,8 @@ static int ab8500_charger_usb_en(struct ux500_charger *charger,
 		di->usb.charger_online = 1;
 
 		/* USBChInputCurr: current that can be drawn from the usb */
-		ret = ab8500_charger_set_vbus_in_curr(di, di->max_usb_in_curr);
+		ret = ab8500_charger_set_vbus_in_curr(di,
+					di->max_usb_in_curr.usb_type_max);
 		if (ret) {
 			dev_err(di->dev, "setting USBChInputCurr failed\n");
 			return ret;
@@ -1668,8 +1661,7 @@ static int ab8500_charger_usb_en(struct ux500_charger *charger,
 		dev_dbg(di->dev, "%s Disabled USB charging\n", __func__);
 
 		/* Cancel any pending Vbat check work */
-		if (delayed_work_pending(&di->check_vbat_work))
-			cancel_delayed_work(&di->check_vbat_work);
+		cancel_delayed_work(&di->check_vbat_work);
 
 	}
 	ab8500_power_supply_changed(di, &di->usb_chg.psy);
@@ -1677,6 +1669,128 @@ static int ab8500_charger_usb_en(struct ux500_charger *charger,
 	return ret;
 }
 
+static int ab8500_external_charger_prepare(struct notifier_block *charger_nb,
+				unsigned long event, void *data)
+{
+	int ret;
+	struct device *dev = data;
+	/*Toggle External charger control pin*/
+	ret = abx500_set_register_interruptible(dev, AB8500_SYS_CTRL1_BLOCK,
+				  AB8500_SYS_CHARGER_CONTROL_REG,
+				  EXTERNAL_CHARGER_DISABLE_REG_VAL);
+	if (ret < 0) {
+		dev_err(dev, "write reg failed %d\n", ret);
+		goto out;
+	}
+	ret = abx500_set_register_interruptible(dev, AB8500_SYS_CTRL1_BLOCK,
+				  AB8500_SYS_CHARGER_CONTROL_REG,
+				  EXTERNAL_CHARGER_ENABLE_REG_VAL);
+	if (ret < 0)
+		dev_err(dev, "Write reg failed %d\n", ret);
+
+out:
+	return ret;
+}
+
+/**
+ * ab8500_charger_usb_check_enable() - enable usb charging
+ * @charger:	pointer to the ux500_charger structure
+ * @vset:	charging voltage
+ * @iset:	charger output current
+ *
+ * Check if the VBUS charger has been disconnected and reconnected without
+ * AB8500 rising an interrupt. Returns 0 on success.
+ */
+static int ab8500_charger_usb_check_enable(struct ux500_charger *charger,
+	int vset, int iset)
+{
+	u8 usbch_ctrl1 = 0;
+	int ret = 0;
+
+	struct ab8500_charger *di = to_ab8500_charger_usb_device_info(charger);
+
+	if (!di->usb.charger_connected)
+		return ret;
+
+	ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
+				AB8500_USBCH_CTRL1_REG, &usbch_ctrl1);
+	if (ret < 0) {
+		dev_err(di->dev, "ab8500 read failed %d\n", __LINE__);
+		return ret;
+	}
+	dev_dbg(di->dev, "USB charger ctrl: 0x%02x\n", usbch_ctrl1);
+
+	if (!(usbch_ctrl1 & USB_CH_ENA)) {
+		dev_info(di->dev, "Charging has been disabled abnormally and will be re-enabled\n");
+
+		ret = abx500_mask_and_set_register_interruptible(di->dev,
+					AB8500_CHARGER, AB8500_CHARGER_CTRL,
+					DROP_COUNT_RESET, DROP_COUNT_RESET);
+		if (ret < 0) {
+			dev_err(di->dev, "ab8500 write failed %d\n", __LINE__);
+			return ret;
+		}
+
+		ret = ab8500_charger_usb_en(&di->usb_chg, true, vset, iset);
+		if (ret < 0) {
+			dev_err(di->dev, "Failed to enable VBUS charger %d\n",
+					__LINE__);
+			return ret;
+		}
+	}
+	return ret;
+}
+
+/**
+ * ab8500_charger_ac_check_enable() - enable usb charging
+ * @charger:	pointer to the ux500_charger structure
+ * @vset:	charging voltage
+ * @iset:	charger output current
+ *
+ * Check if the AC charger has been disconnected and reconnected without
+ * AB8500 rising an interrupt. Returns 0 on success.
+ */
+static int ab8500_charger_ac_check_enable(struct ux500_charger *charger,
+	int vset, int iset)
+{
+	u8 mainch_ctrl1 = 0;
+	int ret = 0;
+
+	struct ab8500_charger *di = to_ab8500_charger_ac_device_info(charger);
+
+	if (!di->ac.charger_connected)
+		return ret;
+
+	ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
+				AB8500_MCH_CTRL1, &mainch_ctrl1);
+	if (ret < 0) {
+		dev_err(di->dev, "ab8500 read failed %d\n", __LINE__);
+		return ret;
+	}
+	dev_dbg(di->dev, "AC charger ctrl: 0x%02x\n", mainch_ctrl1);
+
+	if (!(mainch_ctrl1 & MAIN_CH_ENA)) {
+		dev_info(di->dev, "Charging has been disabled abnormally and will be re-enabled\n");
+
+		ret = abx500_mask_and_set_register_interruptible(di->dev,
+					AB8500_CHARGER, AB8500_CHARGER_CTRL,
+					DROP_COUNT_RESET, DROP_COUNT_RESET);
+
+		if (ret < 0) {
+			dev_err(di->dev, "ab8500 write failed %d\n", __LINE__);
+			return ret;
+		}
+
+		ret = ab8500_charger_ac_en(&di->usb_chg, true, vset, iset);
+		if (ret < 0) {
+			dev_err(di->dev, "failed to enable AC charger %d\n",
+				__LINE__);
+			return ret;
+		}
+	}
+	return ret;
+}
+
 /**
  * ab8500_charger_watchdog_kick() - kick charger watchdog
  * @di:		pointer to the ab8500_charger structure
@@ -1734,8 +1848,68 @@ static int ab8500_charger_update_charger_current(struct ux500_charger *charger,
 
 	/* Reset the main and usb drop input current measurement counter */
 	ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
-				AB8500_CHARGER_CTRL,
-				0x1);
+				AB8500_CHARGER_CTRL, DROP_COUNT_RESET);
+	if (ret) {
+		dev_err(di->dev, "%s write failed\n", __func__);
+		return ret;
+	}
+
+	return ret;
+}
+
+/**
+ * ab8540_charger_power_path_enable() - enable usb power path mode
+ * @charger:	pointer to the ux500_charger structure
+ * @enable:	enable/disable flag
+ *
+ * Enable or disable the power path for usb mode
+ * Returns error code in case of failure else 0(on success)
+ */
+static int ab8540_charger_power_path_enable(struct ux500_charger *charger,
+		bool enable)
+{
+	int ret;
+	struct ab8500_charger *di;
+
+	if (charger->psy.type == POWER_SUPPLY_TYPE_USB)
+		di = to_ab8500_charger_usb_device_info(charger);
+	else
+		return -ENXIO;
+
+	ret = abx500_mask_and_set_register_interruptible(di->dev,
+				AB8500_CHARGER, AB8540_USB_PP_MODE_REG,
+				BUS_POWER_PATH_MODE_ENA, enable);
+	if (ret) {
+		dev_err(di->dev, "%s write failed\n", __func__);
+		return ret;
+	}
+
+	return ret;
+}
+
+
+/**
+ * ab8540_charger_usb_pre_chg_enable() - enable usb pre change
+ * @charger:	pointer to the ux500_charger structure
+ * @enable:	enable/disable flag
+ *
+ * Enable or disable the pre-chage for usb mode
+ * Returns error code in case of failure else 0(on success)
+ */
+static int ab8540_charger_usb_pre_chg_enable(struct ux500_charger *charger,
+		bool enable)
+{
+	int ret;
+	struct ab8500_charger *di;
+
+	if (charger->psy.type == POWER_SUPPLY_TYPE_USB)
+		di = to_ab8500_charger_usb_device_info(charger);
+	else
+		return -ENXIO;
+
+	ret = abx500_mask_and_set_register_interruptible(di->dev,
+				AB8500_CHARGER, AB8540_USB_PP_CHR_REG,
+				BUS_POWER_PATH_PRECHG_ENA, enable);
 	if (ret) {
 		dev_err(di->dev, "%s write failed\n", __func__);
 		return ret;
@@ -1823,9 +1997,10 @@ static void ab8500_charger_check_vbat_work(struct work_struct *work)
 		di->vbat > VBAT_TRESH_IP_CUR_RED))) {
 
 		dev_dbg(di->dev, "Vbat did cross threshold, curr: %d, new: %d,"
-			" old: %d\n", di->max_usb_in_curr, di->vbat,
-			di->old_vbat);
-		ab8500_charger_set_vbus_in_curr(di, di->max_usb_in_curr);
+			" old: %d\n", di->max_usb_in_curr.usb_type_max,
+			di->vbat, di->old_vbat);
+		ab8500_charger_set_vbus_in_curr(di,
+					di->max_usb_in_curr.usb_type_max);
 		power_supply_changed(&di->usb_chg.psy);
 	}
 
@@ -2105,7 +2280,8 @@ static void ab8500_charger_usb_link_attach_work(struct work_struct *work)
 
 	/* Update maximum input current if USB enumeration is not detected */
 	if (!di->usb.charger_online) {
-		ret = ab8500_charger_set_vbus_in_curr(di, di->max_usb_in_curr);
+		ret = ab8500_charger_set_vbus_in_curr(di,
+					di->max_usb_in_curr.usb_type_max);
 		if (ret)
 			return;
 	}
@@ -2125,6 +2301,7 @@ static void ab8500_charger_usb_link_status_work(struct work_struct *work)
 	int detected_chargers;
 	int ret;
 	u8 val;
+	u8 link_status;
 
 	struct ab8500_charger *di = container_of(work,
 		struct ab8500_charger, usb_link_status_work);
@@ -2144,38 +2321,61 @@ static void ab8500_charger_usb_link_status_work(struct work_struct *work)
 	 * to start the charging process. but by jumping
 	 * thru a few hoops it can be forced to start.
 	 */
-	ret = abx500_get_register_interruptible(di->dev, AB8500_USB,
-			AB8500_USB_LINE_STAT_REG, &val);
+	if (is_ab8500(di->parent))
+		ret = abx500_get_register_interruptible(di->dev, AB8500_USB,
+					AB8500_USB_LINE_STAT_REG, &val);
+	else
+		ret = abx500_get_register_interruptible(di->dev, AB8500_USB,
+					AB8500_USB_LINK1_STAT_REG, &val);
+
 	if (ret >= 0)
 		dev_dbg(di->dev, "UsbLineStatus register = 0x%02x\n", val);
 	else
 		dev_dbg(di->dev, "Error reading USB link status\n");
 
+	if (is_ab8500(di->parent))
+		link_status = AB8500_USB_LINK_STATUS;
+	else
+		link_status = AB8505_USB_LINK_STATUS;
+
 	if (detected_chargers & USB_PW_CONN) {
-		if (((val & AB8500_USB_LINK_STATUS) >> 3) == USB_STAT_NOT_VALID_LINK &&
+		if (((val & link_status) >> USB_LINK_STATUS_SHIFT) ==
+				USB_STAT_NOT_VALID_LINK &&
 				di->invalid_charger_detect_state == 0) {
-			dev_dbg(di->dev, "Invalid charger detected, state= 0\n");
+			dev_dbg(di->dev,
+					"Invalid charger detected, state= 0\n");
 			/*Enable charger*/
 			abx500_mask_and_set_register_interruptible(di->dev,
-					AB8500_CHARGER, AB8500_USBCH_CTRL1_REG, 0x01, 0x01);
+					AB8500_CHARGER, AB8500_USBCH_CTRL1_REG,
+					USB_CH_ENA, USB_CH_ENA);
 			/*Enable charger detection*/
-			abx500_mask_and_set_register_interruptible(di->dev, AB8500_USB,
-					AB8500_MCH_IPT_CURLVL_REG, 0x01, 0x01);
+			abx500_mask_and_set_register_interruptible(di->dev,
+					AB8500_USB, AB8500_USB_LINE_CTRL2_REG,
+					USB_CH_DET, USB_CH_DET);
 			di->invalid_charger_detect_state = 1;
 			/*exit and wait for new link status interrupt.*/
 			return;
 
 		}
 		if (di->invalid_charger_detect_state == 1) {
-			dev_dbg(di->dev, "Invalid charger detected, state= 1\n");
+			dev_dbg(di->dev,
+					"Invalid charger detected, state= 1\n");
 			/*Stop charger detection*/
-			abx500_mask_and_set_register_interruptible(di->dev, AB8500_USB,
-					AB8500_MCH_IPT_CURLVL_REG, 0x01, 0x00);
+			abx500_mask_and_set_register_interruptible(di->dev,
+					AB8500_USB, AB8500_USB_LINE_CTRL2_REG,
+					USB_CH_DET, 0x00);
 			/*Check link status*/
-			ret = abx500_get_register_interruptible(di->dev, AB8500_USB,
-					AB8500_USB_LINE_STAT_REG, &val);
+			if (is_ab8500(di->parent))
+				ret = abx500_get_register_interruptible(di->dev,
+					AB8500_USB, AB8500_USB_LINE_STAT_REG,
+					&val);
+			else
+				ret = abx500_get_register_interruptible(di->dev,
+					AB8500_USB, AB8500_USB_LINK1_STAT_REG,
+					&val);
+
 			dev_dbg(di->dev, "USB link status= 0x%02x\n",
-					(val & AB8500_USB_LINK_STATUS) >> 3);
+				(val & link_status) >> USB_LINK_STATUS_SHIFT);
 			di->invalid_charger_detect_state = 2;
 		}
 	} else {
@@ -2273,7 +2473,7 @@ static void ab8500_charger_usb_state_changed_work(struct work_struct *work)
 		if (!ab8500_charger_get_usb_cur(di)) {
 			/* Update maximum input current */
 			ret = ab8500_charger_set_vbus_in_curr(di,
-					di->max_usb_in_curr);
+					di->max_usb_in_curr.usb_type_max);
 			if (ret)
 				return;
 
@@ -2422,7 +2622,9 @@ static irqreturn_t ab8500_charger_mainchplugdet_handler(int irq, void *_di)
 
 	mutex_lock(&di->charger_attached_mutex);
 	mutex_unlock(&di->charger_attached_mutex);
-	queue_delayed_work(di->charger_wq,
+
+	if (is_ab8500(di->parent))
+		queue_delayed_work(di->charger_wq,
 			   &di->ac_charger_attached_work,
 			   HZ);
 	return IRQ_HANDLED;
@@ -2491,6 +2693,8 @@ static void ab8500_charger_vbus_drop_end_work(struct work_struct *work)
 {
 	struct ab8500_charger *di = container_of(work,
 		struct ab8500_charger, vbus_drop_end_work.work);
+	int ret, curr;
+	u8 reg_value;
 
 	di->flags.vbus_drop_end = false;
 
@@ -2498,8 +2702,45 @@ static void ab8500_charger_vbus_drop_end_work(struct work_struct *work)
 	abx500_set_register_interruptible(di->dev,
 				  AB8500_CHARGER, AB8500_CHARGER_CTRL, 0x01);
 
+	if (is_ab8540(di->parent))
+		ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
+				AB8540_CH_USBCH_STAT3_REG, &reg_value);
+	else
+		ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
+				AB8500_CH_USBCH_STAT2_REG, &reg_value);
+	if (ret < 0) {
+		dev_err(di->dev, "%s read failed\n", __func__);
+		return;
+	}
+
+	if (is_ab8540(di->parent))
+		curr = di->bm->chg_input_curr[
+			reg_value & AB8540_AUTO_VBUS_IN_CURR_MASK];
+	else
+		curr = di->bm->chg_input_curr[
+			reg_value >> AUTO_VBUS_IN_CURR_LIM_SHIFT];
+
+	if (di->max_usb_in_curr.calculated_max != curr) {
+		/* USB source is collapsing */
+		di->max_usb_in_curr.calculated_max = curr;
+		dev_dbg(di->dev,
+			 "VBUS input current limiting to %d mA\n",
+			 di->max_usb_in_curr.calculated_max);
+	} else {
+		/*
+		 * USB source can not give more than this amount.
+		 * Taking more will collapse the source.
+		 */
+		di->max_usb_in_curr.set_max =
+			di->max_usb_in_curr.calculated_max;
+		dev_dbg(di->dev,
+			 "VBUS input current limited to %d mA\n",
+			 di->max_usb_in_curr.set_max);
+	}
+
 	if (di->usb.charger_connected)
-		ab8500_charger_set_vbus_in_curr(di, di->max_usb_in_curr);
+		ab8500_charger_set_vbus_in_curr(di,
+					di->max_usb_in_curr.usb_type_max);
 }
 
 /**
@@ -2654,8 +2895,13 @@ static irqreturn_t ab8500_charger_vbuschdropend_handler(int irq, void *_di)
 
 	dev_dbg(di->dev, "VBUS charger drop ended\n");
 	di->flags.vbus_drop_end = true;
+
+	/*
+	 * VBUS might have dropped due to bad connection.
+	 * Schedule a new input limit set to the value SW requests.
+	 */
 	queue_delayed_work(di->charger_wq, &di->vbus_drop_end_work,
-			   round_jiffies(30 * HZ));
+			   round_jiffies(VBUS_IN_CURR_LIM_RETRY_SET_TIME * HZ));
 
 	return IRQ_HANDLED;
 }
@@ -2836,6 +3082,7 @@ static int ab8500_charger_usb_get_property(struct power_supply *psy,
 static int ab8500_charger_init_hw_registers(struct ab8500_charger *di)
 {
 	int ret = 0;
+	u8 bup_vch_range = 0, vbup33_vrtcn = 0;
 
 	/* Setup maximum charger current and voltage for ABB cut2.0 */
 	if (!is_ab8500_1p1_or_earlier(di->parent)) {
@@ -2848,9 +3095,14 @@ static int ab8500_charger_init_hw_registers(struct ab8500_charger *di)
 			goto out;
 		}
 
-		ret = abx500_set_register_interruptible(di->dev,
-			AB8500_CHARGER,
-			AB8500_CH_OPT_CRNTLVL_MAX_REG, CH_OP_CUR_LVL_1P6);
+		if (is_ab8540(di->parent))
+			ret = abx500_set_register_interruptible(di->dev,
+				AB8500_CHARGER, AB8500_CH_OPT_CRNTLVL_MAX_REG,
+				CH_OP_CUR_LVL_2P);
+		else
+			ret = abx500_set_register_interruptible(di->dev,
+				AB8500_CHARGER, AB8500_CH_OPT_CRNTLVL_MAX_REG,
+				CH_OP_CUR_LVL_1P6);
 		if (ret) {
 			dev_err(di->dev,
 				"failed to set CH_OPT_CRNTLVL_MAX_REG\n");
@@ -2858,7 +3110,8 @@ static int ab8500_charger_init_hw_registers(struct ab8500_charger *di)
 		}
 	}
 
-	if (is_ab9540_2p0(di->parent) || is_ab8505_2p0(di->parent))
+	if (is_ab9540_2p0(di->parent) || is_ab9540_3p0(di->parent)
+	 || is_ab8505_2p0(di->parent) || is_ab8540(di->parent))
 		ret = abx500_mask_and_set_register_interruptible(di->dev,
 			AB8500_CHARGER,
 			AB8500_USBCH_CTRL2_REG,
@@ -2930,14 +3183,6 @@ static int ab8500_charger_init_hw_registers(struct ab8500_charger *di)
 		goto out;
 	}
 
-	/* Set charger watchdog timeout */
-	ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
-		AB8500_CH_WD_TIMER_REG, WD_TIMER);
-	if (ret) {
-		dev_err(di->dev, "failed to set charger watchdog timeout\n");
-		goto out;
-	}
-
 	ret = ab8500_charger_led_en(di, false);
 	if (ret < 0) {
 		dev_err(di->dev, "failed to disable LED\n");
@@ -2945,15 +3190,30 @@ static int ab8500_charger_init_hw_registers(struct ab8500_charger *di)
 	}
 
 	/* Backup battery voltage and current */
+	if (di->bm->bkup_bat_v > BUP_VCH_SEL_3P1V)
+		bup_vch_range = BUP_VCH_RANGE;
+	if (di->bm->bkup_bat_v == BUP_VCH_SEL_3P3V)
+		vbup33_vrtcn = VBUP33_VRTCN;
+
 	ret = abx500_set_register_interruptible(di->dev,
 		AB8500_RTC,
 		AB8500_RTC_BACKUP_CHG_REG,
-		di->bm->bkup_bat_v |
-		di->bm->bkup_bat_i);
+		(di->bm->bkup_bat_v & 0x3) | di->bm->bkup_bat_i);
 	if (ret) {
 		dev_err(di->dev, "failed to setup backup battery charging\n");
 		goto out;
 	}
+	if (is_ab8540(di->parent)) {
+		ret = abx500_set_register_interruptible(di->dev,
+			AB8500_RTC,
+			AB8500_RTC_CTRL1_REG,
+			bup_vch_range | vbup33_vrtcn);
+		if (ret) {
+			dev_err(di->dev,
+				"failed to setup backup battery charging\n");
+			goto out;
+		}
+	}
 
 	/* Enable backup battery charging */
 	abx500_mask_and_set_register_interruptible(di->dev,
@@ -2962,6 +3222,25 @@ static int ab8500_charger_init_hw_registers(struct ab8500_charger *di)
 	if (ret < 0)
 		dev_err(di->dev, "%s mask and set failed\n", __func__);
 
+	if (is_ab8540(di->parent)) {
+		ret = abx500_mask_and_set_register_interruptible(di->dev,
+			AB8500_CHARGER, AB8540_USB_PP_MODE_REG,
+			BUS_VSYS_VOL_SELECT_MASK, BUS_VSYS_VOL_SELECT_3P6V);
+		if (ret) {
+			dev_err(di->dev,
+				"failed to setup usb power path vsys voltage\n");
+			goto out;
+		}
+		ret = abx500_mask_and_set_register_interruptible(di->dev,
+			AB8500_CHARGER, AB8540_USB_PP_CHR_REG,
+			BUS_PP_PRECHG_CURRENT_MASK, 0);
+		if (ret) {
+			dev_err(di->dev,
+				"failed to setup usb power path prechage current\n");
+			goto out;
+		}
+	}
+
 out:
 	return ret;
 }
@@ -3055,11 +3334,8 @@ static int ab8500_charger_resume(struct platform_device *pdev)
 			dev_err(di->dev, "Failed to kick WD!\n");
 
 		/* If not already pending start a new timer */
-		if (!delayed_work_pending(
-			&di->kick_wd_work)) {
-			queue_delayed_work(di->charger_wq, &di->kick_wd_work,
-				round_jiffies(WD_KICK_INTERVAL));
-		}
+		queue_delayed_work(di->charger_wq, &di->kick_wd_work,
+				   round_jiffies(WD_KICK_INTERVAL));
 	}
 
 	/* If we still have a HW failure, schedule a new check */
@@ -3079,12 +3355,9 @@ static int ab8500_charger_suspend(struct platform_device *pdev,
 {
 	struct ab8500_charger *di = platform_get_drvdata(pdev);
 
-	/* Cancel any pending HW failure check */
-	if (delayed_work_pending(&di->check_hw_failure_work))
-		cancel_delayed_work(&di->check_hw_failure_work);
-
-	if (delayed_work_pending(&di->vbus_drop_end_work))
-		cancel_delayed_work(&di->vbus_drop_end_work);
+	/* Cancel any pending jobs */
+	cancel_delayed_work(&di->check_hw_failure_work);
+	cancel_delayed_work(&di->vbus_drop_end_work);
 
 	flush_delayed_work(&di->attach_work);
 	flush_delayed_work(&di->usb_charger_attached_work);
@@ -3107,6 +3380,10 @@ static int ab8500_charger_suspend(struct platform_device *pdev,
 #define ab8500_charger_resume       NULL
 #endif
 
+static struct notifier_block charger_nb = {
+	.notifier_call = ab8500_external_charger_prepare,
+};
+
 static int ab8500_charger_remove(struct platform_device *pdev)
 {
 	struct ab8500_charger *di = platform_get_drvdata(pdev);
@@ -3136,13 +3413,18 @@ static int ab8500_charger_remove(struct platform_device *pdev)
 	/* Delete the work queue */
 	destroy_workqueue(di->charger_wq);
 
+	/* Unregister external charger enable notifier */
+	if (!di->ac_chg.enabled)
+		blocking_notifier_chain_unregister(
+			&charger_notifier_list, &charger_nb);
+
 	flush_scheduled_work();
-	if(di->usb_chg.enabled)
+	if (di->usb_chg.enabled)
 		power_supply_unregister(&di->usb_chg.psy);
-#if !defined(CONFIG_CHARGER_PM2301)
-	if(di->ac_chg.enabled)
+
+	if (di->ac_chg.enabled && !di->ac_chg.external)
 		power_supply_unregister(&di->ac_chg.psy);
-#endif
+
 	platform_set_drvdata(pdev, NULL);
 
 	return 0;
@@ -3206,16 +3488,22 @@ static int ab8500_charger_probe(struct platform_device *pdev)
 	di->ac_chg.psy.num_supplicants = ARRAY_SIZE(supply_interface),
 	/* ux500_charger sub-class */
 	di->ac_chg.ops.enable = &ab8500_charger_ac_en;
+	di->ac_chg.ops.check_enable = &ab8500_charger_ac_check_enable;
 	di->ac_chg.ops.kick_wd = &ab8500_charger_watchdog_kick;
 	di->ac_chg.ops.update_curr = &ab8500_charger_update_charger_current;
 	di->ac_chg.max_out_volt = ab8500_charger_voltage_map[
 		ARRAY_SIZE(ab8500_charger_voltage_map) - 1];
-	di->ac_chg.max_out_curr = ab8500_charger_current_map[
-		ARRAY_SIZE(ab8500_charger_current_map) - 1];
+	di->ac_chg.max_out_curr =
+		di->bm->chg_output_curr[di->bm->n_chg_out_curr - 1];
 	di->ac_chg.wdt_refresh = CHG_WD_INTERVAL;
 	di->ac_chg.enabled = di->bm->ac_enabled;
 	di->ac_chg.external = false;
 
+	/*notifier for external charger enabling*/
+	if (!di->ac_chg.enabled)
+		blocking_notifier_chain_register(
+			&charger_notifier_list, &charger_nb);
+
 	/* USB supply */
 	/* power_supply base class */
 	di->usb_chg.psy.name = "ab8500_usb";
@@ -3227,15 +3515,20 @@ static int ab8500_charger_probe(struct platform_device *pdev)
 	di->usb_chg.psy.num_supplicants = ARRAY_SIZE(supply_interface),
 	/* ux500_charger sub-class */
 	di->usb_chg.ops.enable = &ab8500_charger_usb_en;
+	di->usb_chg.ops.check_enable = &ab8500_charger_usb_check_enable;
 	di->usb_chg.ops.kick_wd = &ab8500_charger_watchdog_kick;
 	di->usb_chg.ops.update_curr = &ab8500_charger_update_charger_current;
+	di->usb_chg.ops.pp_enable = &ab8540_charger_power_path_enable;
+	di->usb_chg.ops.pre_chg_enable = &ab8540_charger_usb_pre_chg_enable;
 	di->usb_chg.max_out_volt = ab8500_charger_voltage_map[
 		ARRAY_SIZE(ab8500_charger_voltage_map) - 1];
-	di->usb_chg.max_out_curr = ab8500_charger_current_map[
-		ARRAY_SIZE(ab8500_charger_current_map) - 1];
+	di->usb_chg.max_out_curr =
+		di->bm->chg_output_curr[di->bm->n_chg_out_curr - 1];
 	di->usb_chg.wdt_refresh = CHG_WD_INTERVAL;
 	di->usb_chg.enabled = di->bm->usb_enabled;
 	di->usb_chg.external = false;
+	di->usb_chg.power_path = di->bm->usb_power_path;
+	di->usb_state.usb_current = -1;
 
 	/* Create a work queue for the charger */
 	di->charger_wq =
@@ -3316,7 +3609,7 @@ static int ab8500_charger_probe(struct platform_device *pdev)
 	}
 
 	/* Register AC charger class */
-	if(di->ac_chg.enabled) {
+	if (di->ac_chg.enabled) {
 		ret = power_supply_register(di->dev, &di->ac_chg.psy);
 		if (ret) {
 			dev_err(di->dev, "failed to register AC charger\n");
@@ -3325,7 +3618,7 @@ static int ab8500_charger_probe(struct platform_device *pdev)
 	}
 
 	/* Register USB charger class */
-	if(di->usb_chg.enabled) {
+	if (di->usb_chg.enabled) {
 		ret = power_supply_register(di->dev, &di->usb_chg.psy);
 		if (ret) {
 			dev_err(di->dev, "failed to register USB charger\n");
@@ -3385,14 +3678,16 @@ static int ab8500_charger_probe(struct platform_device *pdev)
 	ch_stat = ab8500_charger_detect_chargers(di, false);
 
 	if ((ch_stat & AC_PW_CONN) == AC_PW_CONN) {
-		queue_delayed_work(di->charger_wq,
-				   &di->ac_charger_attached_work,
-				   HZ);
+		if (is_ab8500(di->parent))
+			queue_delayed_work(di->charger_wq,
+					   &di->ac_charger_attached_work,
+					   HZ);
 	}
 	if ((ch_stat & USB_PW_CONN) == USB_PW_CONN) {
-		queue_delayed_work(di->charger_wq,
-				   &di->usb_charger_attached_work,
-				   HZ);
+		if (is_ab8500(di->parent))
+			queue_delayed_work(di->charger_wq,
+					   &di->usb_charger_attached_work,
+					   HZ);
 	}
 
 	mutex_unlock(&di->charger_attached_mutex);
@@ -3410,10 +3705,10 @@ free_irq:
 put_usb_phy:
 	usb_put_phy(di->usb_phy);
 free_usb:
-	if(di->usb_chg.enabled)
+	if (di->usb_chg.enabled)
 		power_supply_unregister(&di->usb_chg.psy);
 free_ac:
-	if(di->ac_chg.enabled)
+	if (di->ac_chg.enabled)
 		power_supply_unregister(&di->ac_chg.psy);
 free_charger_wq:
 	destroy_workqueue(di->charger_wq);
diff --git a/drivers/power/ab8500_fg.c b/drivers/power/ab8500_fg.c
index 25dae4c4b0ef..1601d27ce5d4 100644
--- a/drivers/power/ab8500_fg.c
+++ b/drivers/power/ab8500_fg.c
@@ -36,7 +36,7 @@
 
 #define MILLI_TO_MICRO			1000
 #define FG_LSB_IN_MA			1627
-#define QLSB_NANO_AMP_HOURS_X10		1129
+#define QLSB_NANO_AMP_HOURS_X10		1071
 #define INS_CURR_TIMEOUT		(3 * HZ)
 
 #define SEC_TO_SAMPLE(S)		(S * 4)
@@ -672,11 +672,11 @@ int ab8500_fg_inst_curr_finalize(struct ab8500_fg *di, int *res)
 	/*
 	 * Convert to unit value in mA
 	 * Full scale input voltage is
-	 * 66.660mV => LSB = 66.660mV/(4096*res) = 1.627mA
+	 * 63.160mV => LSB = 63.160mV/(4096*res) = 1.542mA
 	 * Given a 250ms conversion cycle time the LSB corresponds
-	 * to 112.9 nAh. Convert to current by dividing by the conversion
+	 * to 107.1 nAh. Convert to current by dividing by the conversion
 	 * time in hours (250ms = 1 / (3600 * 4)h)
-	 * 112.9nAh assumes 10mOhm, but fg_res is in 0.1mOhm
+	 * 107.1nAh assumes 10mOhm, but fg_res is in 0.1mOhm
 	 */
 	val = (val * QLSB_NANO_AMP_HOURS_X10 * 36 * 4) /
 		(1000 * di->bm->fg_res);
@@ -1354,9 +1354,6 @@ static void ab8500_fg_check_capacity_limits(struct ab8500_fg *di, bool init)
 			 * algorithm says.
 			 */
 			di->bat_cap.prev_percent = 1;
-			di->bat_cap.permille = 1;
-			di->bat_cap.prev_mah = 1;
-			di->bat_cap.mah = 1;
 			percent = 1;
 
 			changed = true;
@@ -1683,7 +1680,6 @@ static void ab8500_fg_algorithm_discharging(struct ab8500_fg *di)
 		break;
 
 	case AB8500_FG_DISCHARGE_WAKEUP:
-		ab8500_fg_coulomb_counter(di, true);
 		ab8500_fg_calc_cap_discharge_voltage(di, true);
 
 		di->fg_samples = SEC_TO_SAMPLE(
@@ -1768,9 +1764,10 @@ static void ab8500_fg_algorithm(struct ab8500_fg *di)
 			ab8500_fg_algorithm_discharging(di);
 	}
 
-	dev_dbg(di->dev, "[FG_DATA] %d %d %d %d %d %d %d %d %d "
+	dev_dbg(di->dev, "[FG_DATA] %d %d %d %d %d %d %d %d %d %d "
 		"%d %d %d %d %d %d %d\n",
 		di->bat_cap.max_mah_design,
+		di->bat_cap.max_mah,
 		di->bat_cap.mah,
 		di->bat_cap.permille,
 		di->bat_cap.level,
@@ -1982,7 +1979,7 @@ static void ab8500_fg_instant_work(struct work_struct *work)
 }
 
 /**
- * ab8500_fg_cc_data_end_handler() - isr to get battery avg current.
+ * ab8500_fg_cc_data_end_handler() - end of data conversion isr.
  * @irq:       interrupt number
  * @_di:       pointer to the ab8500_fg structure
  *
@@ -2002,7 +1999,7 @@ static irqreturn_t ab8500_fg_cc_data_end_handler(int irq, void *_di)
 }
 
 /**
- * ab8500_fg_cc_convend_handler() - isr to get battery avg current.
+ * ab8500_fg_cc_int_calib_handler () - end of calibration isr.
  * @irq:       interrupt number
  * @_di:       pointer to the ab8500_fg structure
  *
@@ -2153,9 +2150,7 @@ static int ab8500_fg_get_property(struct power_supply *psy,
 			val->intval = di->bat_cap.prev_mah;
 		break;
 	case POWER_SUPPLY_PROP_CAPACITY:
-		if (di->bm->capacity_scaling)
-			val->intval = di->bat_cap.cap_scale.scaled_cap;
-		else if (di->flags.batt_unknown && !di->bm->chg_unknown_bat &&
+		if (di->flags.batt_unknown && !di->bm->chg_unknown_bat &&
 				di->flags.batt_id_received)
 			val->intval = 100;
 		else
@@ -2344,6 +2339,50 @@ static int ab8500_fg_init_hw_registers(struct ab8500_fg *di)
 		dev_err(di->dev, "BattOk init write failed.\n");
 		goto out;
 	}
+
+	if (((is_ab8505(di->parent) || is_ab9540(di->parent)) &&
+			abx500_get_chip_id(di->dev) >= AB8500_CUT2P0)
+			|| is_ab8540(di->parent)) {
+		ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+			AB8505_RTC_PCUT_MAX_TIME_REG, di->bm->fg_params->pcut_max_time);
+
+		if (ret) {
+			dev_err(di->dev, "%s write failed AB8505_RTC_PCUT_MAX_TIME_REG\n", __func__);
+			goto out;
+		};
+
+		ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+			AB8505_RTC_PCUT_FLAG_TIME_REG, di->bm->fg_params->pcut_flag_time);
+
+		if (ret) {
+			dev_err(di->dev, "%s write failed AB8505_RTC_PCUT_FLAG_TIME_REG\n", __func__);
+			goto out;
+		};
+
+		ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+			AB8505_RTC_PCUT_RESTART_REG, di->bm->fg_params->pcut_max_restart);
+
+		if (ret) {
+			dev_err(di->dev, "%s write failed AB8505_RTC_PCUT_RESTART_REG\n", __func__);
+			goto out;
+		};
+
+		ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+			AB8505_RTC_PCUT_DEBOUNCE_REG, di->bm->fg_params->pcut_debounce_time);
+
+		if (ret) {
+			dev_err(di->dev, "%s write failed AB8505_RTC_PCUT_DEBOUNCE_REG\n", __func__);
+			goto out;
+		};
+
+		ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+			AB8505_RTC_PCUT_CTL_STATUS_REG, di->bm->fg_params->pcut_enable);
+
+		if (ret) {
+			dev_err(di->dev, "%s write failed AB8505_RTC_PCUT_CTL_STATUS_REG\n", __func__);
+			goto out;
+		};
+	}
 out:
 	return ret;
 }
@@ -2546,6 +2585,428 @@ static int ab8500_fg_sysfs_init(struct ab8500_fg *di)
 
 	return ret;
 }
+
+static ssize_t ab8505_powercut_flagtime_read(struct device *dev,
+			     struct device_attribute *attr,
+			     char *buf)
+{
+	int ret;
+	u8 reg_value;
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct ab8500_fg *di;
+
+	di = to_ab8500_fg_device_info(psy);
+
+	ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
+		AB8505_RTC_PCUT_FLAG_TIME_REG, &reg_value);
+
+	if (ret < 0) {
+		dev_err(dev, "Failed to read AB8505_RTC_PCUT_FLAG_TIME_REG\n");
+		goto fail;
+	}
+
+	return scnprintf(buf, PAGE_SIZE, "%d\n", (reg_value & 0x7F));
+
+fail:
+	return ret;
+}
+
+static ssize_t ab8505_powercut_flagtime_write(struct device *dev,
+				  struct device_attribute *attr,
+				  const char *buf, size_t count)
+{
+	int ret;
+	long unsigned reg_value;
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct ab8500_fg *di;
+
+	di = to_ab8500_fg_device_info(psy);
+
+	reg_value = simple_strtoul(buf, NULL, 10);
+
+	if (reg_value > 0x7F) {
+		dev_err(dev, "Incorrect parameter, echo 0 (1.98s) - 127 (15.625ms) for flagtime\n");
+		goto fail;
+	}
+
+	ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+		AB8505_RTC_PCUT_FLAG_TIME_REG, (u8)reg_value);
+
+	if (ret < 0)
+		dev_err(dev, "Failed to set AB8505_RTC_PCUT_FLAG_TIME_REG\n");
+
+fail:
+	return count;
+}
+
+static ssize_t ab8505_powercut_maxtime_read(struct device *dev,
+			     struct device_attribute *attr,
+			     char *buf)
+{
+	int ret;
+	u8 reg_value;
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct ab8500_fg *di;
+
+	di = to_ab8500_fg_device_info(psy);
+
+	ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
+		AB8505_RTC_PCUT_MAX_TIME_REG, &reg_value);
+
+	if (ret < 0) {
+		dev_err(dev, "Failed to read AB8505_RTC_PCUT_MAX_TIME_REG\n");
+		goto fail;
+	}
+
+	return scnprintf(buf, PAGE_SIZE, "%d\n", (reg_value & 0x7F));
+
+fail:
+	return ret;
+
+}
+
+static ssize_t ab8505_powercut_maxtime_write(struct device *dev,
+				  struct device_attribute *attr,
+				  const char *buf, size_t count)
+{
+	int ret;
+	int reg_value;
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct ab8500_fg *di;
+
+	di = to_ab8500_fg_device_info(psy);
+
+	reg_value = simple_strtoul(buf, NULL, 10);
+	if (reg_value > 0x7F) {
+		dev_err(dev, "Incorrect parameter, echo 0 (0.0s) - 127 (1.98s) for maxtime\n");
+		goto fail;
+	}
+
+	ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+		AB8505_RTC_PCUT_MAX_TIME_REG, (u8)reg_value);
+
+	if (ret < 0)
+		dev_err(dev, "Failed to set AB8505_RTC_PCUT_MAX_TIME_REG\n");
+
+fail:
+	return count;
+}
+
+static ssize_t ab8505_powercut_restart_read(struct device *dev,
+			     struct device_attribute *attr,
+			     char *buf)
+{
+	int ret;
+	u8 reg_value;
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct ab8500_fg *di;
+
+	di = to_ab8500_fg_device_info(psy);
+
+	ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
+		AB8505_RTC_PCUT_RESTART_REG, &reg_value);
+
+	if (ret < 0) {
+		dev_err(dev, "Failed to read AB8505_RTC_PCUT_RESTART_REG\n");
+		goto fail;
+	}
+
+	return scnprintf(buf, PAGE_SIZE, "%d\n", (reg_value & 0xF));
+
+fail:
+	return ret;
+}
+
+static ssize_t ab8505_powercut_restart_write(struct device *dev,
+					     struct device_attribute *attr,
+					     const char *buf, size_t count)
+{
+	int ret;
+	int reg_value;
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct ab8500_fg *di;
+
+	di = to_ab8500_fg_device_info(psy);
+
+	reg_value = simple_strtoul(buf, NULL, 10);
+	if (reg_value > 0xF) {
+		dev_err(dev, "Incorrect parameter, echo 0 - 15 for number of restart\n");
+		goto fail;
+	}
+
+	ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+						AB8505_RTC_PCUT_RESTART_REG, (u8)reg_value);
+
+	if (ret < 0)
+		dev_err(dev, "Failed to set AB8505_RTC_PCUT_RESTART_REG\n");
+
+fail:
+	return count;
+
+}
+
+static ssize_t ab8505_powercut_timer_read(struct device *dev,
+					  struct device_attribute *attr,
+					  char *buf)
+{
+	int ret;
+	u8 reg_value;
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct ab8500_fg *di;
+
+	di = to_ab8500_fg_device_info(psy);
+
+	ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
+						AB8505_RTC_PCUT_TIME_REG, &reg_value);
+
+	if (ret < 0) {
+		dev_err(dev, "Failed to read AB8505_RTC_PCUT_TIME_REG\n");
+		goto fail;
+	}
+
+	return scnprintf(buf, PAGE_SIZE, "%d\n", (reg_value & 0x7F));
+
+fail:
+	return ret;
+}
+
+static ssize_t ab8505_powercut_restart_counter_read(struct device *dev,
+						    struct device_attribute *attr,
+						    char *buf)
+{
+	int ret;
+	u8 reg_value;
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct ab8500_fg *di;
+
+	di = to_ab8500_fg_device_info(psy);
+
+	ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
+						AB8505_RTC_PCUT_RESTART_REG, &reg_value);
+
+	if (ret < 0) {
+		dev_err(dev, "Failed to read AB8505_RTC_PCUT_RESTART_REG\n");
+		goto fail;
+	}
+
+	return scnprintf(buf, PAGE_SIZE, "%d\n", (reg_value & 0xF0) >> 4);
+
+fail:
+	return ret;
+}
+
+static ssize_t ab8505_powercut_read(struct device *dev,
+				    struct device_attribute *attr,
+				    char *buf)
+{
+	int ret;
+	u8 reg_value;
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct ab8500_fg *di;
+
+	di = to_ab8500_fg_device_info(psy);
+
+	ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
+						AB8505_RTC_PCUT_CTL_STATUS_REG, &reg_value);
+
+	if (ret < 0)
+		goto fail;
+
+	return scnprintf(buf, PAGE_SIZE, "%d\n", (reg_value & 0x1));
+
+fail:
+	return ret;
+}
+
+static ssize_t ab8505_powercut_write(struct device *dev,
+				     struct device_attribute *attr,
+				     const char *buf, size_t count)
+{
+	int ret;
+	int reg_value;
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct ab8500_fg *di;
+
+	di = to_ab8500_fg_device_info(psy);
+
+	reg_value = simple_strtoul(buf, NULL, 10);
+	if (reg_value > 0x1) {
+		dev_err(dev, "Incorrect parameter, echo 0/1 to disable/enable Pcut feature\n");
+		goto fail;
+	}
+
+	ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+						AB8505_RTC_PCUT_CTL_STATUS_REG, (u8)reg_value);
+
+	if (ret < 0)
+		dev_err(dev, "Failed to set AB8505_RTC_PCUT_CTL_STATUS_REG\n");
+
+fail:
+	return count;
+}
+
+static ssize_t ab8505_powercut_flag_read(struct device *dev,
+					 struct device_attribute *attr,
+					 char *buf)
+{
+
+	int ret;
+	u8 reg_value;
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct ab8500_fg *di;
+
+	di = to_ab8500_fg_device_info(psy);
+
+	ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
+						AB8505_RTC_PCUT_CTL_STATUS_REG,  &reg_value);
+
+	if (ret < 0) {
+		dev_err(dev, "Failed to read AB8505_RTC_PCUT_CTL_STATUS_REG\n");
+		goto fail;
+	}
+
+	return scnprintf(buf, PAGE_SIZE, "%d\n", ((reg_value & 0x10) >> 4));
+
+fail:
+	return ret;
+}
+
+static ssize_t ab8505_powercut_debounce_read(struct device *dev,
+					     struct device_attribute *attr,
+					     char *buf)
+{
+	int ret;
+	u8 reg_value;
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct ab8500_fg *di;
+
+	di = to_ab8500_fg_device_info(psy);
+
+	ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
+						AB8505_RTC_PCUT_DEBOUNCE_REG,  &reg_value);
+
+	if (ret < 0) {
+		dev_err(dev, "Failed to read AB8505_RTC_PCUT_DEBOUNCE_REG\n");
+		goto fail;
+	}
+
+	return scnprintf(buf, PAGE_SIZE, "%d\n", (reg_value & 0x7));
+
+fail:
+	return ret;
+}
+
+static ssize_t ab8505_powercut_debounce_write(struct device *dev,
+					      struct device_attribute *attr,
+					      const char *buf, size_t count)
+{
+	int ret;
+	int reg_value;
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct ab8500_fg *di;
+
+	di = to_ab8500_fg_device_info(psy);
+
+	reg_value = simple_strtoul(buf, NULL, 10);
+	if (reg_value > 0x7) {
+		dev_err(dev, "Incorrect parameter, echo 0 to 7 for debounce setting\n");
+		goto fail;
+	}
+
+	ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+						AB8505_RTC_PCUT_DEBOUNCE_REG, (u8)reg_value);
+
+	if (ret < 0)
+		dev_err(dev, "Failed to set AB8505_RTC_PCUT_DEBOUNCE_REG\n");
+
+fail:
+	return count;
+}
+
+static ssize_t ab8505_powercut_enable_status_read(struct device *dev,
+						  struct device_attribute *attr,
+						  char *buf)
+{
+	int ret;
+	u8 reg_value;
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct ab8500_fg *di;
+
+	di = to_ab8500_fg_device_info(psy);
+
+	ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
+						AB8505_RTC_PCUT_CTL_STATUS_REG, &reg_value);
+
+	if (ret < 0) {
+		dev_err(dev, "Failed to read AB8505_RTC_PCUT_CTL_STATUS_REG\n");
+		goto fail;
+	}
+
+	return scnprintf(buf, PAGE_SIZE, "%d\n", ((reg_value & 0x20) >> 5));
+
+fail:
+	return ret;
+}
+
+static struct device_attribute ab8505_fg_sysfs_psy_attrs[] = {
+	__ATTR(powercut_flagtime, (S_IRUGO | S_IWUSR | S_IWGRP),
+		ab8505_powercut_flagtime_read, ab8505_powercut_flagtime_write),
+	__ATTR(powercut_maxtime, (S_IRUGO | S_IWUSR | S_IWGRP),
+		ab8505_powercut_maxtime_read, ab8505_powercut_maxtime_write),
+	__ATTR(powercut_restart_max, (S_IRUGO | S_IWUSR | S_IWGRP),
+		ab8505_powercut_restart_read, ab8505_powercut_restart_write),
+	__ATTR(powercut_timer, S_IRUGO, ab8505_powercut_timer_read, NULL),
+	__ATTR(powercut_restart_counter, S_IRUGO,
+		ab8505_powercut_restart_counter_read, NULL),
+	__ATTR(powercut_enable, (S_IRUGO | S_IWUSR | S_IWGRP),
+		ab8505_powercut_read, ab8505_powercut_write),
+	__ATTR(powercut_flag, S_IRUGO, ab8505_powercut_flag_read, NULL),
+	__ATTR(powercut_debounce_time, (S_IRUGO | S_IWUSR | S_IWGRP),
+		ab8505_powercut_debounce_read, ab8505_powercut_debounce_write),
+	__ATTR(powercut_enable_status, S_IRUGO,
+		ab8505_powercut_enable_status_read, NULL),
+};
+
+static int ab8500_fg_sysfs_psy_create_attrs(struct device *dev)
+{
+	unsigned int i, j;
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct ab8500_fg *di;
+
+	di = to_ab8500_fg_device_info(psy);
+
+	if (((is_ab8505(di->parent) || is_ab9540(di->parent)) &&
+	     abx500_get_chip_id(dev->parent) >= AB8500_CUT2P0)
+	    || is_ab8540(di->parent)) {
+		for (j = 0; j < ARRAY_SIZE(ab8505_fg_sysfs_psy_attrs); j++)
+			if (device_create_file(dev, &ab8505_fg_sysfs_psy_attrs[j]))
+				goto sysfs_psy_create_attrs_failed_ab8505;
+	}
+	return 0;
+sysfs_psy_create_attrs_failed_ab8505:
+	dev_err(dev, "Failed creating sysfs psy attrs for ab8505.\n");
+	while (j--)
+		device_remove_file(dev, &ab8505_fg_sysfs_psy_attrs[i]);
+
+	return -EIO;
+}
+
+static void ab8500_fg_sysfs_psy_remove_attrs(struct device *dev)
+{
+	unsigned int i;
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct ab8500_fg *di;
+
+	di = to_ab8500_fg_device_info(psy);
+
+	if (((is_ab8505(di->parent) || is_ab9540(di->parent)) &&
+	     abx500_get_chip_id(dev->parent) >= AB8500_CUT2P0)
+	    || is_ab8540(di->parent)) {
+		for (i = 0; i < ARRAY_SIZE(ab8505_fg_sysfs_psy_attrs); i++)
+			(void)device_remove_file(dev, &ab8505_fg_sysfs_psy_attrs[i]);
+	}
+}
+
 /* Exposure to the sysfs interface <<END>> */
 
 #if defined(CONFIG_PM)
@@ -2607,6 +3068,7 @@ static int ab8500_fg_remove(struct platform_device *pdev)
 	ab8500_fg_sysfs_exit(di);
 
 	flush_scheduled_work();
+	ab8500_fg_sysfs_psy_remove_attrs(di->fg_psy.dev);
 	power_supply_unregister(&di->fg_psy);
 	platform_set_drvdata(pdev, NULL);
 	return ret;
@@ -2772,6 +3234,13 @@ static int ab8500_fg_probe(struct platform_device *pdev)
 		goto free_irq;
 	}
 
+	ret = ab8500_fg_sysfs_psy_create_attrs(di->fg_psy.dev);
+	if (ret) {
+		dev_err(di->dev, "failed to create FG psy\n");
+		ab8500_fg_sysfs_exit(di);
+		goto free_irq;
+	}
+
 	/* Calibrate the fg first time */
 	di->flags.calibrate = true;
 	di->calib_state = AB8500_FG_CALIB_INIT;
diff --git a/drivers/power/abx500_chargalg.c b/drivers/power/abx500_chargalg.c
index f043c0851a76..9863e423602c 100644
--- a/drivers/power/abx500_chargalg.c
+++ b/drivers/power/abx500_chargalg.c
@@ -1,5 +1,6 @@
 /*
  * Copyright (C) ST-Ericsson SA 2012
+ * Copyright (c) 2012 Sony Mobile Communications AB
  *
  * Charging algorithm driver for abx500 variants
  *
@@ -8,11 +9,13 @@
  *	Johan Palsson <johan.palsson@stericsson.com>
  *	Karl Komierowski <karl.komierowski@stericsson.com>
  *	Arun R Murthy <arun.murthy@stericsson.com>
+ *	Author: Imre Sunyi <imre.sunyi@sonymobile.com>
  */
 
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/device.h>
+#include <linux/hrtimer.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
@@ -24,8 +27,10 @@
 #include <linux/of.h>
 #include <linux/mfd/core.h>
 #include <linux/mfd/abx500.h>
+#include <linux/mfd/abx500/ab8500.h>
 #include <linux/mfd/abx500/ux500_chargalg.h>
 #include <linux/mfd/abx500/ab8500-bm.h>
+#include <linux/notifier.h>
 
 /* Watchdog kick interval */
 #define CHG_WD_INTERVAL			(6 * HZ)
@@ -33,6 +38,18 @@
 /* End-of-charge criteria counter */
 #define EOC_COND_CNT			10
 
+/* One hour expressed in seconds */
+#define ONE_HOUR_IN_SECONDS            3600
+
+/* Five minutes expressed in seconds */
+#define FIVE_MINUTES_IN_SECONDS        300
+
+/* Plus margin for the low battery threshold */
+#define BAT_PLUS_MARGIN                (100)
+
+#define CHARGALG_CURR_STEP_LOW		0
+#define CHARGALG_CURR_STEP_HIGH	100
+
 #define to_abx500_chargalg_device_info(x) container_of((x), \
 	struct abx500_chargalg, chargalg_psy);
 
@@ -66,6 +83,11 @@ struct abx500_chargalg_suspension_status {
 	bool usb_suspended;
 };
 
+struct abx500_chargalg_current_step_status {
+	bool curr_step_change;
+	int curr_step;
+};
+
 struct abx500_chargalg_battery_data {
 	int temp;
 	int volt;
@@ -82,6 +104,7 @@ enum abx500_chargalg_states {
 	STATE_HW_TEMP_PROTECT_INIT,
 	STATE_HW_TEMP_PROTECT,
 	STATE_NORMAL_INIT,
+	STATE_USB_PP_PRE_CHARGE,
 	STATE_NORMAL,
 	STATE_WAIT_FOR_RECHARGE_INIT,
 	STATE_WAIT_FOR_RECHARGE,
@@ -113,6 +136,7 @@ static const char *states[] = {
 	"HW_TEMP_PROTECT_INIT",
 	"HW_TEMP_PROTECT",
 	"NORMAL_INIT",
+	"USB_PP_PRE_CHARGE",
 	"NORMAL",
 	"WAIT_FOR_RECHARGE_INIT",
 	"WAIT_FOR_RECHARGE",
@@ -204,6 +228,8 @@ enum maxim_ret {
  * @batt_data:		data of the battery
  * @susp_status:	current charger suspension status
  * @bm:           	Platform specific battery management information
+ * @curr_status:	Current step status for over-current protection
+ * @parent:		pointer to the struct abx500
  * @chargalg_psy:	structure that holds the battery properties exposed by
  *			the charging algorithm
  * @events:		structure for information about events triggered
@@ -227,6 +253,8 @@ struct abx500_chargalg {
 	struct abx500_chargalg_charger_info chg_info;
 	struct abx500_chargalg_battery_data batt_data;
 	struct abx500_chargalg_suspension_status susp_status;
+	struct ab8500 *parent;
+	struct abx500_chargalg_current_step_status curr_status;
 	struct abx500_bm_data *bm;
 	struct power_supply chargalg_psy;
 	struct ux500_charger *ac_chg;
@@ -236,51 +264,69 @@ struct abx500_chargalg {
 	struct delayed_work chargalg_periodic_work;
 	struct delayed_work chargalg_wd_work;
 	struct work_struct chargalg_work;
-	struct timer_list safety_timer;
-	struct timer_list maintenance_timer;
+	struct hrtimer safety_timer;
+	struct hrtimer maintenance_timer;
 	struct kobject chargalg_kobject;
 };
 
+/*External charger prepare notifier*/
+BLOCKING_NOTIFIER_HEAD(charger_notifier_list);
+
 /* Main battery properties */
 static enum power_supply_property abx500_chargalg_props[] = {
 	POWER_SUPPLY_PROP_STATUS,
 	POWER_SUPPLY_PROP_HEALTH,
 };
 
+struct abx500_chargalg_sysfs_entry {
+	struct attribute attr;
+	ssize_t (*show)(struct abx500_chargalg *, char *);
+	ssize_t (*store)(struct abx500_chargalg *, const char *, size_t);
+};
+
 /**
  * abx500_chargalg_safety_timer_expired() - Expiration of the safety timer
- * @data:	pointer to the abx500_chargalg structure
+ * @timer:     pointer to the hrtimer structure
  *
  * This function gets called when the safety timer for the charger
  * expires
  */
-static void abx500_chargalg_safety_timer_expired(unsigned long data)
+static enum hrtimer_restart
+abx500_chargalg_safety_timer_expired(struct hrtimer *timer)
 {
-	struct abx500_chargalg *di = (struct abx500_chargalg *) data;
+	struct abx500_chargalg *di = container_of(timer, struct abx500_chargalg,
+						  safety_timer);
 	dev_err(di->dev, "Safety timer expired\n");
 	di->events.safety_timer_expired = true;
 
 	/* Trigger execution of the algorithm instantly */
 	queue_work(di->chargalg_wq, &di->chargalg_work);
+
+	return HRTIMER_NORESTART;
 }
 
 /**
  * abx500_chargalg_maintenance_timer_expired() - Expiration of
  * the maintenance timer
- * @i:		pointer to the abx500_chargalg structure
+ * @timer:     pointer to the timer structure
  *
  * This function gets called when the maintenence timer
  * expires
  */
-static void abx500_chargalg_maintenance_timer_expired(unsigned long data)
+static enum hrtimer_restart
+abx500_chargalg_maintenance_timer_expired(struct hrtimer *timer)
 {
 
-	struct abx500_chargalg *di = (struct abx500_chargalg *) data;
+	struct abx500_chargalg *di = container_of(timer, struct abx500_chargalg,
+						  maintenance_timer);
+
 	dev_dbg(di->dev, "Maintenance timer expired\n");
 	di->events.maintenance_timer_expired = true;
 
 	/* Trigger execution of the algorithm instantly */
 	queue_work(di->chargalg_wq, &di->chargalg_work);
+
+	return HRTIMER_NORESTART;
 }
 
 /**
@@ -303,6 +349,30 @@ static void abx500_chargalg_state_to(struct abx500_chargalg *di,
 	di->charge_state = state;
 }
 
+static int abx500_chargalg_check_charger_enable(struct abx500_chargalg *di)
+{
+	switch (di->charge_state) {
+	case STATE_NORMAL:
+	case STATE_MAINTENANCE_A:
+	case STATE_MAINTENANCE_B:
+		break;
+	default:
+		return 0;
+	}
+
+	if (di->chg_info.charger_type & USB_CHG) {
+		return di->usb_chg->ops.check_enable(di->usb_chg,
+                         di->bm->bat_type[di->bm->batt_id].normal_vol_lvl,
+                         di->bm->bat_type[di->bm->batt_id].normal_cur_lvl);
+	} else if ((di->chg_info.charger_type & AC_CHG) &&
+		   !(di->ac_chg->external)) {
+		return di->ac_chg->ops.check_enable(di->ac_chg,
+                         di->bm->bat_type[di->bm->batt_id].normal_vol_lvl,
+                         di->bm->bat_type[di->bm->batt_id].normal_cur_lvl);
+	}
+	return 0;
+}
+
 /**
  * abx500_chargalg_check_charger_connection() - Check charger connection change
  * @di:		pointer to the abx500_chargalg structure
@@ -348,6 +418,22 @@ static int abx500_chargalg_check_charger_connection(struct abx500_chargalg *di)
 }
 
 /**
+ * abx500_chargalg_check_current_step_status() - Check charging current
+ * step status.
+ * @di:		pointer to the abx500_chargalg structure
+ *
+ * This function will check if there is a change in the charging current step
+ * and change charge state accordingly.
+ */
+static void abx500_chargalg_check_current_step_status
+	(struct abx500_chargalg *di)
+{
+	if (di->curr_status.curr_step_change)
+		abx500_chargalg_state_to(di, STATE_NORMAL_INIT);
+	di->curr_status.curr_step_change = false;
+}
+
+/**
  * abx500_chargalg_start_safety_timer() - Start charging safety timer
  * @di:		pointer to the abx500_chargalg structure
  *
@@ -356,19 +442,16 @@ static int abx500_chargalg_check_charger_connection(struct abx500_chargalg *di)
  */
 static void abx500_chargalg_start_safety_timer(struct abx500_chargalg *di)
 {
-	unsigned long timer_expiration = 0;
+	/* Charger-dependent expiration time in hours*/
+	int timer_expiration = 0;
 
 	switch (di->chg_info.charger_type) {
 	case AC_CHG:
-		timer_expiration =
-		round_jiffies(jiffies +
-			(di->bm->main_safety_tmr_h * 3600 * HZ));
+		timer_expiration = di->bm->main_safety_tmr_h;
 		break;
 
 	case USB_CHG:
-		timer_expiration =
-		round_jiffies(jiffies +
-			(di->bm->usb_safety_tmr_h * 3600 * HZ));
+		timer_expiration = di->bm->usb_safety_tmr_h;
 		break;
 
 	default:
@@ -377,11 +460,10 @@ static void abx500_chargalg_start_safety_timer(struct abx500_chargalg *di)
 	}
 
 	di->events.safety_timer_expired = false;
-	di->safety_timer.expires = timer_expiration;
-	if (!timer_pending(&di->safety_timer))
-		add_timer(&di->safety_timer);
-	else
-		mod_timer(&di->safety_timer, timer_expiration);
+	hrtimer_set_expires_range(&di->safety_timer,
+		ktime_set(timer_expiration * ONE_HOUR_IN_SECONDS, 0),
+		ktime_set(FIVE_MINUTES_IN_SECONDS, 0));
+	hrtimer_start_expires(&di->safety_timer, HRTIMER_MODE_REL);
 }
 
 /**
@@ -392,8 +474,8 @@ static void abx500_chargalg_start_safety_timer(struct abx500_chargalg *di)
  */
 static void abx500_chargalg_stop_safety_timer(struct abx500_chargalg *di)
 {
-	di->events.safety_timer_expired = false;
-	del_timer(&di->safety_timer);
+	if (hrtimer_try_to_cancel(&di->safety_timer) >= 0)
+		di->events.safety_timer_expired = false;
 }
 
 /**
@@ -408,17 +490,11 @@ static void abx500_chargalg_stop_safety_timer(struct abx500_chargalg *di)
 static void abx500_chargalg_start_maintenance_timer(struct abx500_chargalg *di,
 	int duration)
 {
-	unsigned long timer_expiration;
-
-	/* Convert from hours to jiffies */
-	timer_expiration = round_jiffies(jiffies + (duration * 3600 * HZ));
-
+	hrtimer_set_expires_range(&di->maintenance_timer,
+		ktime_set(duration * ONE_HOUR_IN_SECONDS, 0),
+		ktime_set(FIVE_MINUTES_IN_SECONDS, 0));
 	di->events.maintenance_timer_expired = false;
-	di->maintenance_timer.expires = timer_expiration;
-	if (!timer_pending(&di->maintenance_timer))
-		add_timer(&di->maintenance_timer);
-	else
-		mod_timer(&di->maintenance_timer, timer_expiration);
+	hrtimer_start_expires(&di->maintenance_timer, HRTIMER_MODE_REL);
 }
 
 /**
@@ -430,8 +506,8 @@ static void abx500_chargalg_start_maintenance_timer(struct abx500_chargalg *di,
  */
 static void abx500_chargalg_stop_maintenance_timer(struct abx500_chargalg *di)
 {
-	di->events.maintenance_timer_expired = false;
-	del_timer(&di->maintenance_timer);
+	if (hrtimer_try_to_cancel(&di->maintenance_timer) >= 0)
+		di->events.maintenance_timer_expired = false;
 }
 
 /**
@@ -477,6 +553,8 @@ static int abx500_chargalg_kick_watchdog(struct abx500_chargalg *di)
 static int abx500_chargalg_ac_en(struct abx500_chargalg *di, int enable,
 	int vset, int iset)
 {
+	static int abx500_chargalg_ex_ac_enable_toggle;
+
 	if (!di->ac_chg || !di->ac_chg->ops.enable)
 		return -ENXIO;
 
@@ -489,6 +567,14 @@ static int abx500_chargalg_ac_en(struct abx500_chargalg *di, int enable,
 	di->chg_info.ac_iset = iset;
 	di->chg_info.ac_vset = vset;
 
+	/* Enable external charger */
+	if (enable && di->ac_chg->external &&
+	    !abx500_chargalg_ex_ac_enable_toggle) {
+		blocking_notifier_call_chain(&charger_notifier_list,
+					     0, di->dev);
+		abx500_chargalg_ex_ac_enable_toggle++;
+	}
+
 	return di->ac_chg->ops.enable(di->ac_chg, enable, vset, iset);
 }
 
@@ -520,6 +606,37 @@ static int abx500_chargalg_usb_en(struct abx500_chargalg *di, int enable,
 	return di->usb_chg->ops.enable(di->usb_chg, enable, vset, iset);
 }
 
+ /**
+ * ab8540_chargalg_usb_pp_en() - Enable/ disable USB power path
+ * @di:                pointer to the abx500_chargalg structure
+ * @enable:    power path enable/disable
+ *
+ * The USB power path will be enable/ disable
+ */
+static int ab8540_chargalg_usb_pp_en(struct abx500_chargalg *di, bool enable)
+{
+	if (!di->usb_chg || !di->usb_chg->ops.pp_enable)
+		return -ENXIO;
+
+	return di->usb_chg->ops.pp_enable(di->usb_chg, enable);
+}
+
+/**
+ * ab8540_chargalg_usb_pre_chg_en() - Enable/ disable USB pre-charge
+ * @di:                pointer to the abx500_chargalg structure
+ * @enable:    USB pre-charge enable/disable
+ *
+ * The USB USB pre-charge will be enable/ disable
+ */
+static int ab8540_chargalg_usb_pre_chg_en(struct abx500_chargalg *di,
+					  bool enable)
+{
+	if (!di->usb_chg || !di->usb_chg->ops.pre_chg_enable)
+		return -ENXIO;
+
+	return di->usb_chg->ops.pre_chg_enable(di->usb_chg, enable);
+}
+
 /**
  * abx500_chargalg_update_chg_curr() - Update charger current
  * @di:		pointer to the abx500_chargalg structure
@@ -613,8 +730,6 @@ static void abx500_chargalg_hold_charging(struct abx500_chargalg *di)
 static void abx500_chargalg_start_charging(struct abx500_chargalg *di,
 	int vset, int iset)
 {
-	bool start_chargalg_wd = true;
-
 	switch (di->chg_info.charger_type) {
 	case AC_CHG:
 		dev_dbg(di->dev,
@@ -632,12 +747,8 @@ static void abx500_chargalg_start_charging(struct abx500_chargalg *di,
 
 	default:
 		dev_err(di->dev, "Unknown charger to charge from\n");
-		start_chargalg_wd = false;
 		break;
 	}
-
-	if (start_chargalg_wd && !delayed_work_pending(&di->chargalg_wd_work))
-		queue_delayed_work(di->chargalg_wq, &di->chargalg_wd_work, 0);
 }
 
 /**
@@ -725,6 +836,9 @@ static void abx500_chargalg_end_of_charge(struct abx500_chargalg *di)
 		di->batt_data.avg_curr > 0) {
 		if (++di->eoc_cnt >= EOC_COND_CNT) {
 			di->eoc_cnt = 0;
+			if ((di->chg_info.charger_type & USB_CHG) &&
+			   (di->usb_chg->power_path))
+				ab8540_chargalg_usb_pp_en(di, true);
 			di->charge_status = POWER_SUPPLY_STATUS_FULL;
 			di->maintenance_chg = true;
 			dev_dbg(di->dev, "EOC reached!\n");
@@ -1217,6 +1331,8 @@ static void abx500_chargalg_external_power_changed(struct power_supply *psy)
 static void abx500_chargalg_algorithm(struct abx500_chargalg *di)
 {
 	int charger_status;
+	int ret;
+	int curr_step_lvl;
 
 	/* Collect data from all power_supply class devices */
 	class_for_each_device(power_supply_class, NULL,
@@ -1227,6 +1343,15 @@ static void abx500_chargalg_algorithm(struct abx500_chargalg *di)
 	abx500_chargalg_check_charger_voltage(di);
 
 	charger_status = abx500_chargalg_check_charger_connection(di);
+	abx500_chargalg_check_current_step_status(di);
+
+	if (is_ab8500(di->parent)) {
+		ret = abx500_chargalg_check_charger_enable(di);
+		if (ret < 0)
+			dev_err(di->dev, "Checking charger is enabled error"
+					": Returned Value %d\n", ret);
+	}
+
 	/*
 	 * First check if we have a charger connected.
 	 * Also we don't allow charging of unknown batteries if configured
@@ -1416,9 +1541,34 @@ static void abx500_chargalg_algorithm(struct abx500_chargalg *di)
 		break;
 
 	case STATE_NORMAL_INIT:
-		abx500_chargalg_start_charging(di,
-			di->bm->bat_type[di->bm->batt_id].normal_vol_lvl,
-			di->bm->bat_type[di->bm->batt_id].normal_cur_lvl);
+		if ((di->chg_info.charger_type & USB_CHG) &&
+				di->usb_chg->power_path) {
+			if (di->batt_data.volt >
+			    (di->bm->fg_params->lowbat_threshold +
+			     BAT_PLUS_MARGIN)) {
+				ab8540_chargalg_usb_pre_chg_en(di, false);
+				ab8540_chargalg_usb_pp_en(di, false);
+			} else {
+				ab8540_chargalg_usb_pp_en(di, true);
+				ab8540_chargalg_usb_pre_chg_en(di, true);
+				abx500_chargalg_state_to(di,
+					STATE_USB_PP_PRE_CHARGE);
+				break;
+			}
+		}
+
+		if (di->curr_status.curr_step == CHARGALG_CURR_STEP_LOW)
+			abx500_chargalg_stop_charging(di);
+		else {
+			curr_step_lvl = di->bm->bat_type[
+				di->bm->batt_id].normal_cur_lvl
+				* di->curr_status.curr_step
+				/ CHARGALG_CURR_STEP_HIGH;
+			abx500_chargalg_start_charging(di,
+				di->bm->bat_type[di->bm->batt_id]
+				.normal_vol_lvl, curr_step_lvl);
+		}
+
 		abx500_chargalg_state_to(di, STATE_NORMAL);
 		abx500_chargalg_start_safety_timer(di);
 		abx500_chargalg_stop_maintenance_timer(di);
@@ -1430,6 +1580,13 @@ static void abx500_chargalg_algorithm(struct abx500_chargalg *di)
 
 		break;
 
+	case STATE_USB_PP_PRE_CHARGE:
+		if (di->batt_data.volt >
+			(di->bm->fg_params->lowbat_threshold +
+			BAT_PLUS_MARGIN))
+			abx500_chargalg_state_to(di, STATE_NORMAL_INIT);
+		break;
+
 	case STATE_NORMAL:
 		handle_maxim_chg_curr(di);
 		if (di->charge_status == POWER_SUPPLY_STATUS_FULL &&
@@ -1653,99 +1810,134 @@ static int abx500_chargalg_get_property(struct power_supply *psy,
 
 /* Exposure to the sysfs interface */
 
-/**
- * abx500_chargalg_sysfs_show() - sysfs show operations
- * @kobj:      pointer to the struct kobject
- * @attr:      pointer to the struct attribute
- * @buf:       buffer that holds the parameter to send to userspace
- *
- * Returns a buffer to be displayed in user space
- */
-static ssize_t abx500_chargalg_sysfs_show(struct kobject *kobj,
-					  struct attribute *attr, char *buf)
+static ssize_t abx500_chargalg_curr_step_show(struct abx500_chargalg *di,
+					      char *buf)
 {
-	struct abx500_chargalg *di = container_of(kobj,
-               struct abx500_chargalg, chargalg_kobject);
+	return sprintf(buf, "%d\n", di->curr_status.curr_step);
+}
+
+static ssize_t abx500_chargalg_curr_step_store(struct abx500_chargalg *di,
+					       const char *buf, size_t length)
+{
+	long int param;
+	int ret;
+
+	ret = kstrtol(buf, 10, &param);
+	if (ret < 0)
+		return ret;
+
+	di->curr_status.curr_step = param;
+	if (di->curr_status.curr_step >= CHARGALG_CURR_STEP_LOW &&
+		di->curr_status.curr_step <= CHARGALG_CURR_STEP_HIGH) {
+		di->curr_status.curr_step_change = true;
+		queue_work(di->chargalg_wq, &di->chargalg_work);
+	} else
+		dev_info(di->dev, "Wrong current step\n"
+			"Enter 0. Disable AC/USB Charging\n"
+			"1--100. Set AC/USB charging current step\n"
+			"100. Enable AC/USB Charging\n");
+
+	return strlen(buf);
+}
+
 
+static ssize_t abx500_chargalg_en_show(struct abx500_chargalg *di,
+				       char *buf)
+{
 	return sprintf(buf, "%d\n",
 		       di->susp_status.ac_suspended &&
 		       di->susp_status.usb_suspended);
 }
 
-/**
- * abx500_chargalg_sysfs_charger() - sysfs store operations
- * @kobj:      pointer to the struct kobject
- * @attr:      pointer to the struct attribute
- * @buf:       buffer that holds the parameter passed from userspace
- * @length:    length of the parameter passed
- *
- * Returns length of the buffer(input taken from user space) on success
- * else error code on failure
- * The operation to be performed on passing the parameters from the user space.
- */
-static ssize_t abx500_chargalg_sysfs_charger(struct kobject *kobj,
-	struct attribute *attr, const char *buf, size_t length)
+static ssize_t abx500_chargalg_en_store(struct abx500_chargalg *di,
+	const char *buf, size_t length)
 {
-	struct abx500_chargalg *di = container_of(kobj,
-		struct abx500_chargalg, chargalg_kobject);
 	long int param;
 	int ac_usb;
 	int ret;
-	char entry = *attr->name;
 
-	switch (entry) {
-	case 'c':
-		ret = strict_strtol(buf, 10, &param);
-		if (ret < 0)
-			return ret;
-
-		ac_usb = param;
-		switch (ac_usb) {
-		case 0:
-			/* Disable charging */
-			di->susp_status.ac_suspended = true;
-			di->susp_status.usb_suspended = true;
-			di->susp_status.suspended_change = true;
-			/* Trigger a state change */
-			queue_work(di->chargalg_wq,
-				&di->chargalg_work);
-			break;
-		case 1:
-			/* Enable AC Charging */
-			di->susp_status.ac_suspended = false;
-			di->susp_status.suspended_change = true;
-			/* Trigger a state change */
-			queue_work(di->chargalg_wq,
-				&di->chargalg_work);
-			break;
-		case 2:
-			/* Enable USB charging */
-			di->susp_status.usb_suspended = false;
-			di->susp_status.suspended_change = true;
-			/* Trigger a state change */
-			queue_work(di->chargalg_wq,
-				&di->chargalg_work);
-			break;
-		default:
-			dev_info(di->dev, "Wrong input\n"
-				"Enter 0. Disable AC/USB Charging\n"
-				"1. Enable AC charging\n"
-				"2. Enable USB Charging\n");
-		};
+	ret = kstrtol(buf, 10, &param);
+	if (ret < 0)
+		return ret;
+
+	ac_usb = param;
+	switch (ac_usb) {
+	case 0:
+		/* Disable charging */
+		di->susp_status.ac_suspended = true;
+		di->susp_status.usb_suspended = true;
+		di->susp_status.suspended_change = true;
+		/* Trigger a state change */
+		queue_work(di->chargalg_wq,
+			&di->chargalg_work);
+		break;
+	case 1:
+		/* Enable AC Charging */
+		di->susp_status.ac_suspended = false;
+		di->susp_status.suspended_change = true;
+		/* Trigger a state change */
+		queue_work(di->chargalg_wq,
+			&di->chargalg_work);
+		break;
+	case 2:
+		/* Enable USB charging */
+		di->susp_status.usb_suspended = false;
+		di->susp_status.suspended_change = true;
+		/* Trigger a state change */
+		queue_work(di->chargalg_wq,
+			&di->chargalg_work);
 		break;
+	default:
+		dev_info(di->dev, "Wrong input\n"
+			"Enter 0. Disable AC/USB Charging\n"
+			"1. Enable AC charging\n"
+			"2. Enable USB Charging\n");
 	};
 	return strlen(buf);
 }
 
-static struct attribute abx500_chargalg_en_charger = \
+static struct abx500_chargalg_sysfs_entry abx500_chargalg_en_charger =
+	__ATTR(chargalg, 0644, abx500_chargalg_en_show,
+				abx500_chargalg_en_store);
+
+static struct abx500_chargalg_sysfs_entry abx500_chargalg_curr_step =
+	__ATTR(chargalg_curr_step, 0644, abx500_chargalg_curr_step_show,
+					abx500_chargalg_curr_step_store);
+
+static ssize_t abx500_chargalg_sysfs_show(struct kobject *kobj,
+	struct attribute *attr, char *buf)
 {
-	.name = "chargalg",
-	.mode = S_IRUGO | S_IWUSR,
-};
+	struct abx500_chargalg_sysfs_entry *entry = container_of(attr,
+		struct abx500_chargalg_sysfs_entry, attr);
+
+	struct abx500_chargalg *di = container_of(kobj,
+		struct abx500_chargalg, chargalg_kobject);
+
+	if (!entry->show)
+		return -EIO;
+
+	return entry->show(di, buf);
+}
+
+static ssize_t abx500_chargalg_sysfs_charger(struct kobject *kobj,
+	struct attribute *attr, const char *buf, size_t length)
+{
+	struct abx500_chargalg_sysfs_entry *entry = container_of(attr,
+		struct abx500_chargalg_sysfs_entry, attr);
+
+	struct abx500_chargalg *di = container_of(kobj,
+		struct abx500_chargalg, chargalg_kobject);
+
+	if (!entry->store)
+		return -EIO;
+
+	return entry->store(di, buf, length);
+}
 
 static struct attribute *abx500_chargalg_chg[] = {
-	&abx500_chargalg_en_charger,
-	NULL
+	&abx500_chargalg_en_charger.attr,
+	&abx500_chargalg_curr_step.attr,
+	NULL,
 };
 
 static const struct sysfs_ops abx500_chargalg_sysfs_ops = {
@@ -1832,10 +2024,16 @@ static int abx500_chargalg_remove(struct platform_device *pdev)
 	/* sysfs interface to enable/disbale charging from user space */
 	abx500_chargalg_sysfs_exit(di);
 
+	hrtimer_cancel(&di->safety_timer);
+	hrtimer_cancel(&di->maintenance_timer);
+
+	cancel_delayed_work_sync(&di->chargalg_periodic_work);
+	cancel_delayed_work_sync(&di->chargalg_wd_work);
+	cancel_work_sync(&di->chargalg_work);
+
 	/* Delete the work queue */
 	destroy_workqueue(di->chargalg_wq);
 
-	flush_scheduled_work();
 	power_supply_unregister(&di->chargalg_psy);
 	platform_set_drvdata(pdev, NULL);
 
@@ -1873,8 +2071,9 @@ static int abx500_chargalg_probe(struct platform_device *pdev)
 		}
 	}
 
-	/* get device struct */
+	/* get device struct and parent */
 	di->dev = &pdev->dev;
+	di->parent = dev_get_drvdata(pdev->dev.parent);
 
 	/* chargalg supply */
 	di->chargalg_psy.name = "abx500_chargalg";
@@ -1888,15 +2087,13 @@ static int abx500_chargalg_probe(struct platform_device *pdev)
 		abx500_chargalg_external_power_changed;
 
 	/* Initilialize safety timer */
-	init_timer(&di->safety_timer);
+	hrtimer_init(&di->safety_timer, CLOCK_REALTIME, HRTIMER_MODE_ABS);
 	di->safety_timer.function = abx500_chargalg_safety_timer_expired;
-	di->safety_timer.data = (unsigned long) di;
 
 	/* Initilialize maintenance timer */
-	init_timer(&di->maintenance_timer);
+	hrtimer_init(&di->maintenance_timer, CLOCK_REALTIME, HRTIMER_MODE_ABS);
 	di->maintenance_timer.function =
 		abx500_chargalg_maintenance_timer_expired;
-	di->maintenance_timer.data = (unsigned long) di;
 
 	/* Create a work queue for the chargalg */
 	di->chargalg_wq =
@@ -1933,6 +2130,7 @@ static int abx500_chargalg_probe(struct platform_device *pdev)
 		dev_err(di->dev, "failed to create sysfs entry\n");
 		goto free_psy;
 	}
+	di->curr_status.curr_step = CHARGALG_CURR_STEP_HIGH;
 
 	/* Run the charging algorithm */
 	queue_delayed_work(di->chargalg_wq, &di->chargalg_periodic_work, 0);
@@ -1964,18 +2162,7 @@ static struct platform_driver abx500_chargalg_driver = {
 	},
 };
 
-static int __init abx500_chargalg_init(void)
-{
-	return platform_driver_register(&abx500_chargalg_driver);
-}
-
-static void __exit abx500_chargalg_exit(void)
-{
-	platform_driver_unregister(&abx500_chargalg_driver);
-}
-
-module_init(abx500_chargalg_init);
-module_exit(abx500_chargalg_exit);
+module_platform_driver(abx500_chargalg_driver);
 
 MODULE_LICENSE("GPL v2");
 MODULE_AUTHOR("Johan Palsson, Karl Komierowski");
diff --git a/drivers/power/pm2301_charger.c b/drivers/power/pm2301_charger.c
index ed48d75bb786..618c46d25a3b 100644
--- a/drivers/power/pm2301_charger.c
+++ b/drivers/power/pm2301_charger.c
@@ -16,24 +16,24 @@
 #include <linux/slab.h>
 #include <linux/platform_device.h>
 #include <linux/power_supply.h>
-#include <linux/completion.h>
 #include <linux/regulator/consumer.h>
 #include <linux/err.h>
 #include <linux/i2c.h>
 #include <linux/workqueue.h>
-#include <linux/kobject.h>
-#include <linux/mfd/abx500.h>
 #include <linux/mfd/abx500/ab8500.h>
 #include <linux/mfd/abx500/ab8500-bm.h>
-#include <linux/mfd/abx500/ab8500-gpadc.h>
 #include <linux/mfd/abx500/ux500_chargalg.h>
 #include <linux/pm2301_charger.h>
 #include <linux/gpio.h>
+#include <linux/pm_runtime.h>
 
 #include "pm2301_charger.h"
 
 #define to_pm2xxx_charger_ac_device_info(x) container_of((x), \
 		struct pm2xxx_charger, ac_chg)
+#define SLEEP_MIN		50
+#define SLEEP_MAX		100
+#define PM2XXX_AUTOSUSPEND_DELAY 500
 
 static int pm2xxx_interrupt_registers[] = {
 	PM2XXX_REG_INT1,
@@ -113,33 +113,24 @@ static const struct i2c_device_id pm2xxx_ident[] = {
 
 static void set_lpn_pin(struct pm2xxx_charger *pm2)
 {
-	if (pm2->ac.charger_connected)
-		return;
-	gpio_set_value(pm2->lpn_pin, 1);
-
-	return;
+	if (!pm2->ac.charger_connected && gpio_is_valid(pm2->lpn_pin)) {
+		gpio_set_value(pm2->lpn_pin, 1);
+		usleep_range(SLEEP_MIN, SLEEP_MAX);
+	}
 }
 
 static void clear_lpn_pin(struct pm2xxx_charger *pm2)
 {
-	if (pm2->ac.charger_connected)
-		return;
-	gpio_set_value(pm2->lpn_pin, 0);
-
-	return;
+	if (!pm2->ac.charger_connected && gpio_is_valid(pm2->lpn_pin))
+		gpio_set_value(pm2->lpn_pin, 0);
 }
 
 static int pm2xxx_reg_read(struct pm2xxx_charger *pm2, int reg, u8 *val)
 {
 	int ret;
-	/*
-	 * When AC adaptor is unplugged, the host
-	 * must put LPN high to be able to
-	 * communicate by I2C with PM2301
-	 * and receive I2C "acknowledge" from PM2301.
-	 */
-	mutex_lock(&pm2->lock);
-	set_lpn_pin(pm2);
+
+	/* wake up the device */
+	pm_runtime_get_sync(pm2->dev);
 
 	ret = i2c_smbus_read_i2c_block_data(pm2->config.pm2xxx_i2c, reg,
 				1, val);
@@ -147,8 +138,8 @@ static int pm2xxx_reg_read(struct pm2xxx_charger *pm2, int reg, u8 *val)
 		dev_err(pm2->dev, "Error reading register at 0x%x\n", reg);
 	else
 		ret = 0;
-	clear_lpn_pin(pm2);
-	mutex_unlock(&pm2->lock);
+
+	pm_runtime_put_sync(pm2->dev);
 
 	return ret;
 }
@@ -156,14 +147,9 @@ static int pm2xxx_reg_read(struct pm2xxx_charger *pm2, int reg, u8 *val)
 static int pm2xxx_reg_write(struct pm2xxx_charger *pm2, int reg, u8 val)
 {
 	int ret;
-	/*
-	 * When AC adaptor is unplugged, the host
-	 * must put LPN high to be able to
-	 * communicate by I2C with PM2301
-	 * and receive I2C "acknowledge" from PM2301.
-	 */
-	mutex_lock(&pm2->lock);
-	set_lpn_pin(pm2);
+
+	/* wake up the device */
+	pm_runtime_get_sync(pm2->dev);
 
 	ret = i2c_smbus_write_i2c_block_data(pm2->config.pm2xxx_i2c, reg,
 				1, &val);
@@ -171,8 +157,8 @@ static int pm2xxx_reg_write(struct pm2xxx_charger *pm2, int reg, u8 val)
 		dev_err(pm2->dev, "Error writing register at 0x%x\n", reg);
 	else
 		ret = 0;
-	clear_lpn_pin(pm2);
-	mutex_unlock(&pm2->lock);
+
+	pm_runtime_put_sync(pm2->dev);
 
 	return ret;
 }
@@ -192,11 +178,22 @@ static int pm2xxx_charging_disable_mngt(struct pm2xxx_charger *pm2)
 {
 	int ret;
 
+	/* Disable SW EOC ctrl */
+	ret = pm2xxx_reg_write(pm2, PM2XXX_SW_CTRL_REG, PM2XXX_SWCTRL_HW);
+	if (ret < 0) {
+		dev_err(pm2->dev, "%s pm2xxx write failed\n", __func__);
+		return ret;
+	}
+
 	/* Disable charging */
 	ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG2,
 			(PM2XXX_CH_AUTO_RESUME_DIS | PM2XXX_CHARGER_DIS));
+	if (ret < 0) {
+		dev_err(pm2->dev, "%s pm2xxx write failed\n", __func__);
+		return ret;
+	}
 
-	return ret;
+	return 0;
 }
 
 static int pm2xxx_charger_batt_therm_mngt(struct pm2xxx_charger *pm2, int val)
@@ -216,21 +213,14 @@ int pm2xxx_charger_die_therm_mngt(struct pm2xxx_charger *pm2, int val)
 
 static int pm2xxx_charger_ovv_mngt(struct pm2xxx_charger *pm2, int val)
 {
-	int ret = 0;
+	dev_err(pm2->dev, "Overvoltage detected\n");
+	pm2->flags.ovv = true;
+	power_supply_changed(&pm2->ac_chg.psy);
 
-	pm2->failure_input_ovv++;
-	if (pm2->failure_input_ovv < 4) {
-		ret = pm2xxx_charging_enable_mngt(pm2);
-		goto out;
-	} else {
-		pm2->failure_input_ovv = 0;
-		dev_err(pm2->dev, "Overvoltage detected\n");
-		pm2->flags.ovv = true;
-		power_supply_changed(&pm2->ac_chg.psy);
-	}
+	/* Schedule a new HW failure check */
+	queue_delayed_work(pm2->charger_wq, &pm2->check_hw_failure_work, 0);
 
-out:
-	return ret;
+	return 0;
 }
 
 static int pm2xxx_charger_wd_exp_mngt(struct pm2xxx_charger *pm2, int val)
@@ -245,13 +235,29 @@ static int pm2xxx_charger_wd_exp_mngt(struct pm2xxx_charger *pm2, int val)
 
 static int pm2xxx_charger_vbat_lsig_mngt(struct pm2xxx_charger *pm2, int val)
 {
+	int ret;
+
 	switch (val) {
 	case PM2XXX_INT1_ITVBATLOWR:
 		dev_dbg(pm2->dev, "VBAT grows above VBAT_LOW level\n");
+		/* Enable SW EOC ctrl */
+		ret = pm2xxx_reg_write(pm2, PM2XXX_SW_CTRL_REG,
+							PM2XXX_SWCTRL_SW);
+		if (ret < 0) {
+			dev_err(pm2->dev, "%s pm2xxx write failed\n", __func__);
+			return ret;
+		}
 		break;
 
 	case PM2XXX_INT1_ITVBATLOWF:
 		dev_dbg(pm2->dev, "VBAT drops below VBAT_LOW level\n");
+		/* Disable SW EOC ctrl */
+		ret = pm2xxx_reg_write(pm2, PM2XXX_SW_CTRL_REG,
+							PM2XXX_SWCTRL_HW);
+		if (ret < 0) {
+			dev_err(pm2->dev, "%s pm2xxx write failed\n", __func__);
+			return ret;
+		}
 		break;
 
 	default:
@@ -322,16 +328,27 @@ static int pm2_int_reg0(void *pm2_data, int val)
 	struct pm2xxx_charger *pm2 = pm2_data;
 	int ret = 0;
 
-	if (val & (PM2XXX_INT1_ITVBATLOWR | PM2XXX_INT1_ITVBATLOWF)) {
-		ret = pm2xxx_charger_vbat_lsig_mngt(pm2, val &
-			(PM2XXX_INT1_ITVBATLOWR | PM2XXX_INT1_ITVBATLOWF));
+	if (val & PM2XXX_INT1_ITVBATLOWR) {
+		ret = pm2xxx_charger_vbat_lsig_mngt(pm2,
+						PM2XXX_INT1_ITVBATLOWR);
+		if (ret < 0)
+			goto out;
+	}
+
+	if (val & PM2XXX_INT1_ITVBATLOWF) {
+		ret = pm2xxx_charger_vbat_lsig_mngt(pm2,
+						PM2XXX_INT1_ITVBATLOWF);
+		if (ret < 0)
+			goto out;
 	}
 
 	if (val & PM2XXX_INT1_ITVBATDISCONNECT) {
 		ret = pm2xxx_charger_bat_disc_mngt(pm2,
 				PM2XXX_INT1_ITVBATDISCONNECT);
+		if (ret < 0)
+			goto out;
 	}
-
+out:
 	return ret;
 }
 
@@ -447,7 +464,6 @@ static int pm2_int_reg5(void *pm2_data, int val)
 	struct pm2xxx_charger *pm2 = pm2_data;
 	int ret = 0;
 
-
 	if (val & (PM2XXX_INT6_ITVPWR2DROP | PM2XXX_INT6_ITVPWR1DROP)) {
 		dev_dbg(pm2->dev, "VMPWR drop to VBAT level\n");
 	}
@@ -468,14 +484,22 @@ static irqreturn_t  pm2xxx_irq_int(int irq, void *data)
 	struct pm2xxx_interrupts *interrupt = pm2->pm2_int;
 	int i;
 
-	for (i = 0; i < PM2XXX_NUM_INT_REG; i++) {
-		 pm2xxx_reg_read(pm2,
+	/* wake up the device */
+	pm_runtime_get_sync(pm2->dev);
+
+	do {
+		for (i = 0; i < PM2XXX_NUM_INT_REG; i++) {
+			pm2xxx_reg_read(pm2,
 				pm2xxx_interrupt_registers[i],
 				&(interrupt->reg[i]));
 
-		if (interrupt->reg[i] > 0)
-			interrupt->handler[i](pm2, interrupt->reg[i]);
-	}
+			if (interrupt->reg[i] > 0)
+				interrupt->handler[i](pm2, interrupt->reg[i]);
+		}
+	} while (gpio_get_value(pm2->pdata->gpio_irq_number) == 0);
+
+	pm_runtime_mark_last_busy(pm2->dev);
+	pm_runtime_put_autosuspend(pm2->dev);
 
 	return IRQ_HANDLED;
 }
@@ -592,6 +616,8 @@ static int pm2xxx_charger_ac_get_property(struct power_supply *psy,
 			val->intval = POWER_SUPPLY_HEALTH_DEAD;
 		else if (pm2->flags.main_thermal_prot)
 			val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+		else if (pm2->flags.ovv)
+			val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
 		else
 			val->intval = POWER_SUPPLY_HEALTH_GOOD;
 		break;
@@ -674,10 +700,6 @@ static int pm2xxx_charging_init(struct pm2xxx_charger *pm2)
 	ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_LOW_LEV_COMP_REG,
 		PM2XXX_VBAT_LOW_MONITORING_ENA);
 
-	/* Disable LED */
-	ret = pm2xxx_reg_write(pm2, PM2XXX_LED_CTRL_REG,
-		PM2XXX_LED_SELECT_DIS);
-
 	return ret;
 }
 
@@ -822,10 +844,54 @@ static void pm2xxx_charger_ac_work(struct work_struct *work)
 	sysfs_notify(&pm2->ac_chg.psy.dev->kobj, NULL, "present");
 };
 
+static void pm2xxx_charger_check_hw_failure_work(struct work_struct *work)
+{
+	u8 reg_value;
+
+	struct pm2xxx_charger *pm2 = container_of(work,
+		struct pm2xxx_charger, check_hw_failure_work.work);
+
+	if (pm2->flags.ovv) {
+		pm2xxx_reg_read(pm2, PM2XXX_SRCE_REG_INT4, &reg_value);
+
+		if (!(reg_value & (PM2XXX_INT4_S_ITVPWR1OVV |
+					PM2XXX_INT4_S_ITVPWR2OVV))) {
+			pm2->flags.ovv = false;
+			power_supply_changed(&pm2->ac_chg.psy);
+		}
+	}
+
+	/* If we still have a failure, schedule a new check */
+	if (pm2->flags.ovv) {
+		queue_delayed_work(pm2->charger_wq,
+			&pm2->check_hw_failure_work, round_jiffies(HZ));
+	}
+}
+
 static void pm2xxx_charger_check_main_thermal_prot_work(
 	struct work_struct *work)
 {
-};
+	int ret;
+	u8 val;
+
+	struct pm2xxx_charger *pm2 = container_of(work, struct pm2xxx_charger,
+					check_main_thermal_prot_work);
+
+	/* Check if die temp warning is still active */
+	ret = pm2xxx_reg_read(pm2, PM2XXX_SRCE_REG_INT5, &val);
+	if (ret < 0) {
+		dev_err(pm2->dev, "%s pm2xxx read failed\n", __func__);
+		return;
+	}
+	if (val & (PM2XXX_INT5_S_ITTHERMALWARNINGRISE
+			| PM2XXX_INT5_S_ITTHERMALSHUTDOWNRISE))
+		pm2->flags.main_thermal_prot = true;
+	else if (val & (PM2XXX_INT5_S_ITTHERMALWARNINGFALL
+				| PM2XXX_INT5_S_ITTHERMALSHUTDOWNFALL))
+		pm2->flags.main_thermal_prot = false;
+
+	power_supply_changed(&pm2->ac_chg.psy);
+}
 
 static struct pm2xxx_interrupts pm2xxx_int = {
 	.handler[0] = pm2_int_reg0,
@@ -842,22 +908,92 @@ static struct pm2xxx_irq pm2xxx_charger_irq[] = {
 
 static int pm2xxx_wall_charger_resume(struct i2c_client *i2c_client)
 {
+	struct pm2xxx_charger *pm2;
+
+	pm2 =  (struct pm2xxx_charger *)i2c_get_clientdata(i2c_client);
+	set_lpn_pin(pm2);
+
+	/* If we still have a HW failure, schedule a new check */
+	if (pm2->flags.ovv)
+		queue_delayed_work(pm2->charger_wq,
+				&pm2->check_hw_failure_work, 0);
+
 	return 0;
 }
 
 static int pm2xxx_wall_charger_suspend(struct i2c_client *i2c_client,
 	pm_message_t state)
 {
+	struct pm2xxx_charger *pm2;
+
+	pm2 =  (struct pm2xxx_charger *)i2c_get_clientdata(i2c_client);
+	clear_lpn_pin(pm2);
+
+	/* Cancel any pending HW failure check */
+	if (delayed_work_pending(&pm2->check_hw_failure_work))
+		cancel_delayed_work(&pm2->check_hw_failure_work);
+
+	flush_work(&pm2->ac_work);
+	flush_work(&pm2->check_main_thermal_prot_work);
+
 	return 0;
 }
 
-static int __devinit pm2xxx_wall_charger_probe(struct i2c_client *i2c_client,
+#ifdef CONFIG_PM
+static int  pm2xxx_runtime_suspend(struct device *dev)
+{
+	struct i2c_client *pm2xxx_i2c_client = to_i2c_client(dev);
+	struct pm2xxx_charger *pm2;
+	int ret = 0;
+
+	pm2 = (struct pm2xxx_charger *)i2c_get_clientdata(pm2xxx_i2c_client);
+	if (!pm2) {
+		dev_err(pm2->dev, "no pm2xxx_charger data supplied\n");
+		ret = -EINVAL;
+		return ret;
+	}
+
+	clear_lpn_pin(pm2);
+
+	return ret;
+}
+
+static int  pm2xxx_runtime_resume(struct device *dev)
+{
+	struct i2c_client *pm2xxx_i2c_client = to_i2c_client(dev);
+	struct pm2xxx_charger *pm2;
+	int ret = 0;
+
+	pm2 = (struct pm2xxx_charger *)i2c_get_clientdata(pm2xxx_i2c_client);
+	if (!pm2) {
+		dev_err(pm2->dev, "no pm2xxx_charger data supplied\n");
+		ret = -EINVAL;
+		return ret;
+	}
+
+	if (gpio_is_valid(pm2->lpn_pin) && gpio_get_value(pm2->lpn_pin) == 0)
+		set_lpn_pin(pm2);
+
+	return ret;
+}
+
+static const struct dev_pm_ops pm2xxx_pm_ops = {
+	.runtime_suspend = pm2xxx_runtime_suspend,
+	.runtime_resume = pm2xxx_runtime_resume,
+};
+#define  PM2XXX_PM_OPS (&pm2xxx_pm_ops)
+#else
+#define  PM2XXX_PM_OPS  NULL
+#endif
+
+static int pm2xxx_wall_charger_probe(struct i2c_client *i2c_client,
 		const struct i2c_device_id *id)
 {
 	struct pm2xxx_platform_data *pl_data = i2c_client->dev.platform_data;
 	struct pm2xxx_charger *pm2;
 	int ret = 0;
 	u8 val;
+	int i;
 
 	pm2 = kzalloc(sizeof(struct pm2xxx_charger), GFP_KERNEL);
 	if (!pm2) {
@@ -867,7 +1003,6 @@ static int __devinit pm2xxx_wall_charger_probe(struct i2c_client *i2c_client,
 
 	/* get parent data */
 	pm2->dev = &i2c_client->dev;
-	pm2->gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
 
 	pm2->pm2_int = &pm2xxx_int;
 
@@ -889,14 +1024,6 @@ static int __devinit pm2xxx_wall_charger_probe(struct i2c_client *i2c_client,
 
 	pm2->bat = pl_data->battery;
 
-	/*get lpn GPIO from platform data*/
-	if (!pm2->pdata->lpn_gpio) {
-		dev_err(pm2->dev, "no lpn gpio data supplied\n");
-		ret = -EINVAL;
-		goto free_device_info;
-	}
-	pm2->lpn_pin = pm2->pdata->lpn_gpio;
-
 	if (!i2c_check_functionality(i2c_client->adapter,
 			I2C_FUNC_SMBUS_BYTE_DATA |
 			I2C_FUNC_SMBUS_READ_WORD_DATA)) {
@@ -945,6 +1072,10 @@ static int __devinit pm2xxx_wall_charger_probe(struct i2c_client *i2c_client,
 	INIT_WORK(&pm2->check_main_thermal_prot_work,
 		pm2xxx_charger_check_main_thermal_prot_work);
 
+	/* Init work for HW failure check */
+	INIT_DEFERRABLE_WORK(&pm2->check_hw_failure_work,
+		pm2xxx_charger_check_hw_failure_work);
+
 	/*
 	 * VDD ADC supply needs to be enabled from this driver when there
 	 * is a charger connected to avoid erroneous BTEMP_HIGH/LOW
@@ -965,40 +1096,72 @@ static int __devinit pm2xxx_wall_charger_probe(struct i2c_client *i2c_client,
 	}
 
 	/* Register interrupts */
-	ret = request_threaded_irq(pm2->pdata->irq_number, NULL,
+	ret = request_threaded_irq(gpio_to_irq(pm2->pdata->gpio_irq_number),
+				NULL,
 				pm2xxx_charger_irq[0].isr,
 				pm2->pdata->irq_type,
 				pm2xxx_charger_irq[0].name, pm2);
 
 	if (ret != 0) {
 		dev_err(pm2->dev, "failed to request %s IRQ %d: %d\n",
-		pm2xxx_charger_irq[0].name, pm2->pdata->irq_number, ret);
+		pm2xxx_charger_irq[0].name,
+			gpio_to_irq(pm2->pdata->gpio_irq_number), ret);
 		goto unregister_pm2xxx_charger;
 	}
 
-	/*Initialize lock*/
-	mutex_init(&pm2->lock);
+	ret = pm_runtime_set_active(pm2->dev);
+	if (ret)
+		dev_err(pm2->dev, "set active Error\n");
 
-	/*
-	 * Charger detection mechanism requires pulling up the LPN pin
-	 * while i2c communication if Charger is not connected
-	 * LPN pin of PM2301 is GPIO60 of AB9540
-	 */
-	ret = gpio_request(pm2->lpn_pin, "pm2301_lpm_gpio");
-	if (ret < 0) {
-		dev_err(pm2->dev, "pm2301_lpm_gpio request failed\n");
-		goto unregister_pm2xxx_charger;
+	pm_runtime_enable(pm2->dev);
+	pm_runtime_set_autosuspend_delay(pm2->dev, PM2XXX_AUTOSUSPEND_DELAY);
+	pm_runtime_use_autosuspend(pm2->dev);
+	pm_runtime_resume(pm2->dev);
+
+	/* pm interrupt can wake up system */
+	ret = enable_irq_wake(gpio_to_irq(pm2->pdata->gpio_irq_number));
+	if (ret) {
+		dev_err(pm2->dev, "failed to set irq wake\n");
+		goto unregister_pm2xxx_interrupt;
 	}
-	ret = gpio_direction_output(pm2->lpn_pin, 0);
-	if (ret < 0) {
-		dev_err(pm2->dev, "pm2301_lpm_gpio direction failed\n");
-		goto free_gpio;
+
+	mutex_init(&pm2->lock);
+
+	if (gpio_is_valid(pm2->pdata->lpn_gpio)) {
+		/* get lpn GPIO from platform data */
+		pm2->lpn_pin = pm2->pdata->lpn_gpio;
+
+		/*
+		 * Charger detection mechanism requires pulling up the LPN pin
+		 * while i2c communication if Charger is not connected
+		 * LPN pin of PM2301 is GPIO60 of AB9540
+		 */
+		ret = gpio_request(pm2->lpn_pin, "pm2301_lpm_gpio");
+
+		if (ret < 0) {
+			dev_err(pm2->dev, "pm2301_lpm_gpio request failed\n");
+			goto disable_pm2_irq_wake;
+		}
+		ret = gpio_direction_output(pm2->lpn_pin, 0);
+		if (ret < 0) {
+			dev_err(pm2->dev, "pm2301_lpm_gpio direction failed\n");
+			goto free_gpio;
+		}
+		set_lpn_pin(pm2);
 	}
 
+	/* read  interrupt registers */
+	for (i = 0; i < PM2XXX_NUM_INT_REG; i++)
+		pm2xxx_reg_read(pm2,
+			pm2xxx_interrupt_registers[i],
+			&val);
+
 	ret = pm2xxx_charger_detection(pm2, &val);
 
 	if ((ret == 0) && val) {
 		pm2->ac.charger_connected = 1;
+		ab8500_override_turn_on_stat(~AB8500_POW_KEY_1_ON,
+					     AB8500_MAIN_CH_DET);
 		pm2->ac_conn = true;
 		power_supply_changed(&pm2->ac_chg.psy);
 		sysfs_notify(&pm2->ac_chg.psy.dev->kobj, NULL, "present");
@@ -1007,7 +1170,13 @@ static int __devinit pm2xxx_wall_charger_probe(struct i2c_client *i2c_client,
 	return 0;
 
 free_gpio:
-	gpio_free(pm2->lpn_pin);
+	if (gpio_is_valid(pm2->lpn_pin))
+		gpio_free(pm2->lpn_pin);
+disable_pm2_irq_wake:
+	disable_irq_wake(gpio_to_irq(pm2->pdata->gpio_irq_number));
+unregister_pm2xxx_interrupt:
+	/* disable interrupt */
+	free_irq(gpio_to_irq(pm2->pdata->gpio_irq_number), pm2);
 unregister_pm2xxx_charger:
 	/* unregister power supply */
 	power_supply_unregister(&pm2->ac_chg.psy);
@@ -1018,18 +1187,24 @@ free_charger_wq:
 	destroy_workqueue(pm2->charger_wq);
 free_device_info:
 	kfree(pm2);
+
 	return ret;
 }
 
-static int __devexit pm2xxx_wall_charger_remove(struct i2c_client *i2c_client)
+static int pm2xxx_wall_charger_remove(struct i2c_client *i2c_client)
 {
 	struct pm2xxx_charger *pm2 = i2c_get_clientdata(i2c_client);
 
+	/* Disable pm_runtime */
+	pm_runtime_disable(pm2->dev);
 	/* Disable AC charging */
 	pm2xxx_charger_ac_en(&pm2->ac_chg, false, 0, 0);
 
+	/* Disable wake by pm interrupt */
+	disable_irq_wake(gpio_to_irq(pm2->pdata->gpio_irq_number));
+
 	/* Disable interrupts */
-	free_irq(pm2->pdata->irq_number, pm2);
+	free_irq(gpio_to_irq(pm2->pdata->gpio_irq_number), pm2);
 
 	/* Delete the work queue */
 	destroy_workqueue(pm2->charger_wq);
@@ -1041,8 +1216,8 @@ static int __devexit pm2xxx_wall_charger_remove(struct i2c_client *i2c_client)
 
 	power_supply_unregister(&pm2->ac_chg.psy);
 
-	/*Free GPIO60*/
-	gpio_free(pm2->lpn_pin);
+	if (gpio_is_valid(pm2->lpn_pin))
+		gpio_free(pm2->lpn_pin);
 
 	kfree(pm2);
 
@@ -1058,12 +1233,13 @@ MODULE_DEVICE_TABLE(i2c, pm2xxx_id);
 
 static struct i2c_driver pm2xxx_charger_driver = {
 	.probe = pm2xxx_wall_charger_probe,
-	.remove = __devexit_p(pm2xxx_wall_charger_remove),
+	.remove = pm2xxx_wall_charger_remove,
 	.suspend = pm2xxx_wall_charger_suspend,
 	.resume = pm2xxx_wall_charger_resume,
 	.driver = {
 		.name = "pm2xxx-wall_charger",
 		.owner = THIS_MODULE,
+		.pm = PM2XXX_PM_OPS,
 	},
 	.id_table = pm2xxx_id,
 };
@@ -1078,11 +1254,10 @@ static void __exit pm2xxx_charger_exit(void)
 	i2c_del_driver(&pm2xxx_charger_driver);
 }
 
-subsys_initcall_sync(pm2xxx_charger_init);
+device_initcall_sync(pm2xxx_charger_init);
 module_exit(pm2xxx_charger_exit);
 
 MODULE_LICENSE("GPL v2");
 MODULE_AUTHOR("Rajkumar kasirajan, Olivier Launay");
 MODULE_ALIAS("platform:pm2xxx-charger");
 MODULE_DESCRIPTION("PM2xxx charger management driver");
-
diff --git a/drivers/power/pm2301_charger.h b/drivers/power/pm2301_charger.h
index e6319cdbc94f..8ce3cc0195df 100644
--- a/drivers/power/pm2301_charger.h
+++ b/drivers/power/pm2301_charger.h
@@ -9,27 +9,6 @@
 #ifndef PM2301_CHARGER_H
 #define PM2301_CHARGER_H
 
-#define MAIN_WDOG_ENA			0x01
-#define MAIN_WDOG_KICK			0x02
-#define MAIN_WDOG_DIS			0x00
-#define CHARG_WD_KICK			0x01
-#define MAIN_CH_ENA			0x01
-#define MAIN_CH_NO_OVERSHOOT_ENA_N	0x02
-#define MAIN_CH_DET			0x01
-#define MAIN_CH_CV_ON			0x04
-#define OTP_ENABLE_WD			0x01
-
-#define MAIN_CH_INPUT_CURR_SHIFT	4
-
-#define LED_INDICATOR_PWM_ENA		0x01
-#define LED_INDICATOR_PWM_DIS		0x00
-#define LED_IND_CUR_5MA			0x04
-#define LED_INDICATOR_PWM_DUTY_252_256	0xBF
-
-/* HW failure constants */
-#define MAIN_CH_TH_PROT			0x02
-#define MAIN_CH_NOK			0x01
-
 /* Watchdog timeout constant */
 #define WD_TIMER			0x30 /* 4min */
 #define WD_KICK_INTERVAL		(30 * HZ)
@@ -495,7 +474,6 @@ struct pm2xxx_charger {
 	int failure_input_ovv;
 	unsigned int lpn_pin;
 	struct pm2xxx_interrupts *pm2_int;
-	struct ab8500_gpadc *gpadc;
 	struct regulator *regu;
 	struct pm2xxx_bm_data *bat;
 	struct mutex lock;
@@ -506,6 +484,7 @@ struct pm2xxx_charger {
 	struct delayed_work check_vbat_work;
 	struct work_struct ac_work;
 	struct work_struct check_main_thermal_prot_work;
+	struct delayed_work check_hw_failure_work;
 	struct ux500_charger ac_chg;
 	struct pm2xxx_charger_event_flags flags;
 };