usb: musb: Return error value from musb_mailbox

At least on n900 we have phy-twl4030-usb only generating cable
interrupts, and then have a separate USB PHY.

In order for musb to know the real cable status, we need to
clear any cached state until musb is ready. Otherwise the cable
status interrupts will get just ignored if the status does
not change from the initial state.

To do this, let's add a return value to musb_mailbox(), and
reset cached linkstat to MUSB_UNKNOWN on error. Sorry to cause
a bit of churn here, I should have added that already last time
patching musb_mailbox().

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 files changed, 29 insertions, 14 deletions

diff --git a/drivers/phy/phy-twl4030-usb.c b/drivers/phy/phy-twl4030-usb.c
index 6b6af6cba454..d9b10a39a2cf 100644
--- a/drivers/phy/phy-twl4030-usb.c
+++ b/drivers/phy/phy-twl4030-usb.c
@@ -463,7 +463,8 @@ static int twl4030_phy_power_on(struct phy *phy)
 	twl4030_usb_set_mode(twl, twl->usb_mode);
 	if (twl->usb_mode == T2_USB_MODE_ULPI)
 		twl4030_i2c_access(twl, 0);
-	schedule_delayed_work(&twl->id_workaround_work, 0);
+	twl->linkstat = MUSB_UNKNOWN;
+	schedule_delayed_work(&twl->id_workaround_work, HZ);
 
 	return 0;
 }
@@ -537,6 +538,7 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
 	struct twl4030_usb *twl = _twl;
 	enum musb_vbus_id_status status;
 	bool status_changed = false;
+	int err;
 
 	status = twl4030_usb_linkstat(twl);
 
@@ -567,7 +569,9 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
 			pm_runtime_mark_last_busy(twl->dev);
 			pm_runtime_put_autosuspend(twl->dev);
 		}
-		musb_mailbox(status);
+		err = musb_mailbox(status);
+		if (err)
+			twl->linkstat = MUSB_UNKNOWN;
 	}
 
 	/* don't schedule during sleep - irq works right then */
@@ -595,7 +599,8 @@ static int twl4030_phy_init(struct phy *phy)
 	struct twl4030_usb *twl = phy_get_drvdata(phy);
 
 	pm_runtime_get_sync(twl->dev);
-	schedule_delayed_work(&twl->id_workaround_work, 0);
+	twl->linkstat = MUSB_UNKNOWN;
+	schedule_delayed_work(&twl->id_workaround_work, HZ);
 	pm_runtime_mark_last_busy(twl->dev);
 	pm_runtime_put_autosuspend(twl->dev);
 
@@ -763,7 +768,8 @@ static int twl4030_usb_remove(struct platform_device *pdev)
 	if (cable_present(twl->linkstat))
 		pm_runtime_put_noidle(twl->dev);
 	pm_runtime_mark_last_busy(twl->dev);
-	pm_runtime_put_sync_suspend(twl->dev);
+	pm_runtime_dont_use_autosuspend(&pdev->dev);
+	pm_runtime_put_sync(twl->dev);
 	pm_runtime_disable(twl->dev);
 
 	/* autogate 60MHz ULPI clock,
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 23888d579e8b..6469eff4fc30 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1679,7 +1679,7 @@ EXPORT_SYMBOL_GPL(musb_dma_completion);
 #define use_dma			0
 #endif
 
-static void (*musb_phy_callback)(enum musb_vbus_id_status status);
+static int (*musb_phy_callback)(enum musb_vbus_id_status status);
 
 /*
  * musb_mailbox - optional phy notifier function
@@ -1688,11 +1688,12 @@ static void (*musb_phy_callback)(enum musb_vbus_id_status status);
  * Optionally gets called from the USB PHY. Note that the USB PHY must be
  * disabled at the point the phy_callback is registered or unregistered.
  */
-void musb_mailbox(enum musb_vbus_id_status status)
+int musb_mailbox(enum musb_vbus_id_status status)
 {
 	if (musb_phy_callback)
-		musb_phy_callback(status);
+		return musb_phy_callback(status);
 
+	return -ENODEV;
 };
 EXPORT_SYMBOL_GPL(musb_mailbox);
 
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 29473846b098..b55a776b03eb 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -215,7 +215,7 @@ struct musb_platform_ops {
 				dma_addr_t *dma_addr, u32 *len);
 	void	(*pre_root_reset_end)(struct musb *musb);
 	void	(*post_root_reset_end)(struct musb *musb);
-	void	(*phy_callback)(enum musb_vbus_id_status status);
+	int	(*phy_callback)(enum musb_vbus_id_status status);
 };
 
 /*
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index d312d42592d6..2c54f52ae386 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -180,22 +180,24 @@ static void omap2430_set_power(struct musb *musb, bool enabled, bool cable)
 	}
 }
 
-static void omap2430_musb_mailbox(enum musb_vbus_id_status status)
+static int omap2430_musb_mailbox(enum musb_vbus_id_status status)
 {
 	struct omap2430_glue	*glue = _glue;
 
 	if (!glue) {
 		pr_err("%s: musb core is not yet initialized\n", __func__);
-		return;
+		return -EPROBE_DEFER;
 	}
 	glue->status = status;
 
 	if (!glue_to_musb(glue)) {
 		pr_err("%s: musb core is not yet ready\n", __func__);
-		return;
+		return -EPROBE_DEFER;
 	}
 
 	schedule_work(&glue->omap_musb_mailbox_work);
+
+	return 0;
 }
 
 static void omap_musb_set_mailbox(struct omap2430_glue *glue)
diff --git a/drivers/usb/phy/phy-twl6030-usb.c b/drivers/usb/phy/phy-twl6030-usb.c
index 24e2b3cf1867..c66a447c3dfe 100644
--- a/drivers/usb/phy/phy-twl6030-usb.c
+++ b/drivers/usb/phy/phy-twl6030-usb.c
@@ -227,12 +227,16 @@ static irqreturn_t twl6030_usb_irq(int irq, void *_twl)
 			twl->asleep = 1;
 			status = MUSB_VBUS_VALID;
 			twl->linkstat = status;
-			musb_mailbox(status);
+			ret = musb_mailbox(status);
+			if (ret)
+				twl->linkstat = MUSB_UNKNOWN;
 		} else {
 			if (twl->linkstat != MUSB_UNKNOWN) {
 				status = MUSB_VBUS_OFF;
 				twl->linkstat = status;
-				musb_mailbox(status);
+				ret = musb_mailbox(status);
+				if (ret)
+					twl->linkstat = MUSB_UNKNOWN;
 				if (twl->asleep) {
 					regulator_disable(twl->usb3v3);
 					twl->asleep = 0;
@@ -264,7 +268,9 @@ static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl)
 		twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_SET);
 		status = MUSB_ID_GROUND;
 		twl->linkstat = status;
-		musb_mailbox(status);
+		ret = musb_mailbox(status);
+		if (ret)
+			twl->linkstat = MUSB_UNKNOWN;
 	} else  {
 		twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_CLR);
 		twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET);