Merge tag 'extcon-next-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next

Chanwoo writes:

Update extcon for v3.17

This patchset add new extcon provider driver and fix minor issue of extcon driver.

Detailed description for patchset:
1. Add new Silicon-Mitus SM5502 MUIC (Micro-USB Interface Controller) device
- extcon-sm5502 driver  is capable of identifying the type of the external power
source and attached accessory. And external power sources, such as Dedicated
charger or a standard USB port, are able to charge the battery in the smart
phone via the connector.

2. Fix minor issue of extcon driver
- extcon-arizona driver
- extcon-palmas driver
- Remove unnecessary OOM messages for all extcon device drivers

3. Fix minor issue of extcon core
- Re-order the sequence of extcon device driver in Kconfig/Makefile alphabitically
- Set parent device of extcon device automatically using devm_extcon_dev_allocate()

4. Fix MAX77693 driver
- This patchset has dependency on MFD/Regulator/Extcon. So, Lee Jones
(MFD Maintainer) created Immutable branch between MFD and Extcon due
for v3.17 merge-window and then I merged this patchset from MFD git repo[1]
to Extcon git repo.
  [1] git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
  (branch: ib-mfd-extcon-regulator)

16 files changed, 978 insertions, 484 deletions

diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig
index aebde489c291..6f2f4727de2c 100644
--- a/drivers/extcon/Kconfig
+++ b/drivers/extcon/Kconfig
@@ -14,6 +14,20 @@ if EXTCON
 
 comment "Extcon Device Drivers"
 
+config EXTCON_ADC_JACK
+	tristate "ADC Jack extcon support"
+	depends on IIO
+	help
+	  Say Y here to enable extcon device driver based on ADC values.
+
+config EXTCON_ARIZONA
+	tristate "Wolfson Arizona EXTCON support"
+	depends on MFD_ARIZONA && INPUT && SND_SOC
+	help
+	  Say Y here to enable support for external accessory detection
+	  with Wolfson Arizona devices. These are audio CODECs with
+	  advanced audio accessory detection support.
+
 config EXTCON_GPIO
 	tristate "GPIO extcon support"
 	depends on GPIOLIB
@@ -21,12 +35,6 @@ config EXTCON_GPIO
 	  Say Y here to enable GPIO based extcon support. Note that GPIO
 	  extcon supports single state per extcon instance.
 
-config EXTCON_ADC_JACK
-	tristate "ADC Jack extcon support"
-	depends on IIO
-	help
-	  Say Y here to enable extcon device driver based on ADC values.
-
 config EXTCON_MAX14577
 	tristate "MAX14577/77836 EXTCON Support"
 	depends on MFD_MAX14577
@@ -55,14 +63,6 @@ config EXTCON_MAX8997
 	  Maxim MAX8997 PMIC. The MAX8997 MUIC is a USB port accessory
 	  detector and switch.
 
-config EXTCON_ARIZONA
-	tristate "Wolfson Arizona EXTCON support"
-	depends on MFD_ARIZONA && INPUT && SND_SOC
-	help
-	  Say Y here to enable support for external accessory detection
-	  with Wolfson Arizona devices. These are audio CODECs with
-	  advanced audio accessory detection support.
-
 config EXTCON_PALMAS
 	tristate "Palmas USB EXTCON support"
 	depends on MFD_PALMAS
@@ -70,4 +70,14 @@ config EXTCON_PALMAS
 	  Say Y here to enable support for USB peripheral and USB host
 	  detection by palmas usb.
 
+config EXTCON_SM5502
+	tristate "SM5502 EXTCON support"
+	select IRQ_DOMAIN
+	select REGMAP_I2C
+	select REGMAP_IRQ
+	help
+	  If you say yes here you get support for the MUIC device of
+	  Silicon Mitus SM5502. The SM5502 is a USB port accessory
+	  detector and switch.
+
 endif # MULTISTATE_SWITCH
diff --git a/drivers/extcon/Makefile b/drivers/extcon/Makefile
index bf7861ec0906..b38546eb522a 100644
--- a/drivers/extcon/Makefile
+++ b/drivers/extcon/Makefile
@@ -1,12 +1,13 @@
-#
+
 # Makefile for external connector class (extcon) devices
 #
 
 obj-$(CONFIG_EXTCON)		+= extcon-class.o
-obj-$(CONFIG_EXTCON_GPIO)	+= extcon-gpio.o
 obj-$(CONFIG_EXTCON_ADC_JACK)	+= extcon-adc-jack.o
+obj-$(CONFIG_EXTCON_ARIZONA)	+= extcon-arizona.o
+obj-$(CONFIG_EXTCON_GPIO)	+= extcon-gpio.o
 obj-$(CONFIG_EXTCON_MAX14577)	+= extcon-max14577.o
 obj-$(CONFIG_EXTCON_MAX77693)	+= extcon-max77693.o
 obj-$(CONFIG_EXTCON_MAX8997)	+= extcon-max8997.o
-obj-$(CONFIG_EXTCON_ARIZONA)	+= extcon-arizona.o
 obj-$(CONFIG_EXTCON_PALMAS)	+= extcon-palmas.o
+obj-$(CONFIG_EXTCON_SM5502)	+= extcon-sm5502.o
diff --git a/drivers/extcon/extcon-adc-jack.c b/drivers/extcon/extcon-adc-jack.c
index e18f95be3733..d860229e4de1 100644
--- a/drivers/extcon/extcon-adc-jack.c
+++ b/drivers/extcon/extcon-adc-jack.c
@@ -112,7 +112,6 @@ static int adc_jack_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "failed to allocate extcon device\n");
 		return -ENOMEM;
 	}
-	data->edev->dev.parent = &pdev->dev;
 	data->edev->name = pdata->name;
 
 	/* Check the length of array and set num_cables */
diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
index 6c84e3d12043..ba51588cc000 100644
--- a/drivers/extcon/extcon-arizona.c
+++ b/drivers/extcon/extcon-arizona.c
@@ -39,6 +39,11 @@
 #define ARIZONA_ACCDET_MODE_HPL 1
 #define ARIZONA_ACCDET_MODE_HPR 2
 
+#define ARIZONA_MICD_CLAMP_MODE_JDL      0x4
+#define ARIZONA_MICD_CLAMP_MODE_JDH      0x5
+#define ARIZONA_MICD_CLAMP_MODE_JDL_GP5H 0x9
+#define ARIZONA_MICD_CLAMP_MODE_JDH_GP5H 0xb
+
 #define ARIZONA_HPDET_MAX 10000
 
 #define HPDET_DEBOUNCE 500
@@ -324,14 +329,17 @@ static void arizona_stop_mic(struct arizona_extcon_info *info)
 }
 
 static struct {
+	unsigned int threshold;
 	unsigned int factor_a;
 	unsigned int factor_b;
 } arizona_hpdet_b_ranges[] = {
-	{  5528,   362464 },
-	{ 11084,  6186851 },
-	{ 11065, 65460395 },
+	{ 100,  5528,   362464 },
+	{ 169, 11084,  6186851 },
+	{ 169, 11065, 65460395 },
 };
 
+#define ARIZONA_HPDET_B_RANGE_MAX 0x3fb
+
 static struct {
 	int min;
 	int max;
@@ -386,7 +394,8 @@ static int arizona_hpdet_read(struct arizona_extcon_info *info)
 			   >> ARIZONA_HP_IMPEDANCE_RANGE_SHIFT;
 
 		if (range < ARRAY_SIZE(arizona_hpdet_b_ranges) - 1 &&
-		    (val < 100 || val >= 0x3fb)) {
+		    (val < arizona_hpdet_b_ranges[range].threshold ||
+		     val >= ARIZONA_HPDET_B_RANGE_MAX)) {
 			range++;
 			dev_dbg(arizona->dev, "Moving to HPDET range %d\n",
 				range);
@@ -399,7 +408,8 @@ static int arizona_hpdet_read(struct arizona_extcon_info *info)
 		}
 
 		/* If we go out of range report top of range */
-		if (val < 100 || val >= 0x3fb) {
+		if (val < arizona_hpdet_b_ranges[range].threshold ||
+		    val >= ARIZONA_HPDET_B_RANGE_MAX) {
 			dev_dbg(arizona->dev, "Measurement out of range\n");
 			return ARIZONA_HPDET_MAX;
 		}
@@ -664,9 +674,8 @@ err:
 			   ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC);
 
 	/* Just report headphone */
-	ret = extcon_update_state(info->edev,
-				  1 << ARIZONA_CABLE_HEADPHONE,
-				  1 << ARIZONA_CABLE_HEADPHONE);
+	ret = extcon_set_cable_state_(info->edev,
+				      ARIZONA_CABLE_HEADPHONE, true);
 	if (ret != 0)
 		dev_err(arizona->dev, "Failed to report headphone: %d\n", ret);
 
@@ -723,9 +732,8 @@ err:
 			   ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC);
 
 	/* Just report headphone */
-	ret = extcon_update_state(info->edev,
-				  1 << ARIZONA_CABLE_HEADPHONE,
-				  1 << ARIZONA_CABLE_HEADPHONE);
+	ret = extcon_set_cable_state_(info->edev,
+				      ARIZONA_CABLE_HEADPHONE, true);
 	if (ret != 0)
 		dev_err(arizona->dev, "Failed to report headphone: %d\n", ret);
 
@@ -812,16 +820,15 @@ static void arizona_micd_detect(struct work_struct *work)
 	if (info->detecting && (val & ARIZONA_MICD_LVL_8)) {
 		arizona_identify_headphone(info);
 
-		ret = extcon_update_state(info->edev,
-					  1 << ARIZONA_CABLE_MICROPHONE,
-					  1 << ARIZONA_CABLE_MICROPHONE);
+		ret = extcon_set_cable_state_(info->edev,
+					      ARIZONA_CABLE_MICROPHONE, true);
 
 		if (ret != 0)
 			dev_err(arizona->dev, "Headset report failed: %d\n",
 				ret);
 
 		/* Don't need to regulate for button detection */
-		ret = regulator_allow_bypass(info->micvdd, false);
+		ret = regulator_allow_bypass(info->micvdd, true);
 		if (ret != 0) {
 			dev_err(arizona->dev, "Failed to bypass MICVDD: %d\n",
 				ret);
@@ -962,10 +969,16 @@ static irqreturn_t arizona_jackdet(int irq, void *data)
 
 	if (arizona->pdata.jd_gpio5) {
 		mask = ARIZONA_MICD_CLAMP_STS;
-		present = 0;
+		if (arizona->pdata.jd_invert)
+			present = ARIZONA_MICD_CLAMP_STS;
+		else
+			present = 0;
 	} else {
 		mask = ARIZONA_JD1_STS;
-		present = ARIZONA_JD1_STS;
+		if (arizona->pdata.jd_invert)
+			present = 0;
+		else
+			present = ARIZONA_JD1_STS;
 	}
 
 	ret = regmap_read(arizona->regmap, ARIZONA_AOD_IRQ_RAW_STATUS, &val);
@@ -1096,6 +1109,7 @@ static int arizona_extcon_probe(struct platform_device *pdev)
 	struct arizona_pdata *pdata = &arizona->pdata;
 	struct arizona_extcon_info *info;
 	unsigned int val;
+	unsigned int clamp_mode;
 	int jack_irq_fall, jack_irq_rise;
 	int ret, mode, i, j;
 
@@ -1103,12 +1117,10 @@ static int arizona_extcon_probe(struct platform_device *pdev)
 		return -EPROBE_DEFER;
 
 	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
-	if (!info) {
-		dev_err(&pdev->dev, "Failed to allocate memory\n");
+	if (!info)
 		return -ENOMEM;
-	}
 
-	info->micvdd = devm_regulator_get(arizona->dev, "MICVDD");
+	info->micvdd = devm_regulator_get(&pdev->dev, "MICVDD");
 	if (IS_ERR(info->micvdd)) {
 		ret = PTR_ERR(info->micvdd);
 		dev_err(arizona->dev, "Failed to get MICVDD: %d\n", ret);
@@ -1156,7 +1168,6 @@ static int arizona_extcon_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 	info->edev->name = "Headset Jack";
-	info->edev->dev.parent = arizona->dev;
 
 	ret = devm_extcon_dev_register(&pdev->dev, info->edev);
 	if (ret < 0) {
@@ -1174,7 +1185,6 @@ static int arizona_extcon_probe(struct platform_device *pdev)
 
 	info->input->name = "Headset";
 	info->input->phys = "arizona/extcon";
-	info->input->dev.parent = &pdev->dev;
 
 	if (pdata->num_micd_configs) {
 		info->micd_modes = pdata->micd_configs;
@@ -1305,16 +1315,22 @@ static int arizona_extcon_probe(struct platform_device *pdev)
 			regmap_write(arizona->regmap, ARIZONA_GPIO5_CTRL,
 				     val);
 
-			regmap_update_bits(arizona->regmap,
-					   ARIZONA_MICD_CLAMP_CONTROL,
-					   ARIZONA_MICD_CLAMP_MODE_MASK, 0x9);
+			if (arizona->pdata.jd_invert)
+				clamp_mode = ARIZONA_MICD_CLAMP_MODE_JDH_GP5H;
+			else
+				clamp_mode = ARIZONA_MICD_CLAMP_MODE_JDL_GP5H;
 		} else {
-			regmap_update_bits(arizona->regmap,
-					   ARIZONA_MICD_CLAMP_CONTROL,
-					   ARIZONA_MICD_CLAMP_MODE_MASK, 0x4);
+			if (arizona->pdata.jd_invert)
+				clamp_mode = ARIZONA_MICD_CLAMP_MODE_JDH;
+			else
+				clamp_mode = ARIZONA_MICD_CLAMP_MODE_JDL;
 		}
 
 		regmap_update_bits(arizona->regmap,
+				   ARIZONA_MICD_CLAMP_CONTROL,
+				   ARIZONA_MICD_CLAMP_MODE_MASK, clamp_mode);
+
+		regmap_update_bits(arizona->regmap,
 				   ARIZONA_JACK_DETECT_DEBOUNCE,
 				   ARIZONA_MICD_CLAMP_DB,
 				   ARIZONA_MICD_CLAMP_DB);
diff --git a/drivers/extcon/extcon-class.c b/drivers/extcon/extcon-class.c
index 18d42c0e4581..4c2f2c543bb7 100644
--- a/drivers/extcon/extcon-class.c
+++ b/drivers/extcon/extcon-class.c
@@ -645,6 +645,8 @@ struct extcon_dev *devm_extcon_dev_allocate(struct device *dev,
 		return edev;
 	}
 
+	edev->dev.parent = dev;
+
 	*ptr = edev;
 	devres_add(dev, ptr);
 
diff --git a/drivers/extcon/extcon-gpio.c b/drivers/extcon/extcon-gpio.c
index 645b28356819..5b7ec274cb63 100644
--- a/drivers/extcon/extcon-gpio.c
+++ b/drivers/extcon/extcon-gpio.c
@@ -105,7 +105,6 @@ static int gpio_extcon_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 	extcon_data->edev->name = pdata->name;
-	extcon_data->edev->dev.parent = &pdev->dev;
 
 	extcon_data->gpio = pdata->gpio;
 	extcon_data->gpio_active_low = pdata->gpio_active_low;
diff --git a/drivers/extcon/extcon-max14577.c b/drivers/extcon/extcon-max14577.c
index d49e891b5675..7309743d0da1 100644
--- a/drivers/extcon/extcon-max14577.c
+++ b/drivers/extcon/extcon-max14577.c
@@ -692,10 +692,9 @@ static int max14577_muic_probe(struct platform_device *pdev)
 	u8 id;
 
 	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
-	if (!info) {
-		dev_err(&pdev->dev, "failed to allocate memory\n");
+	if (!info)
 		return -ENOMEM;
-	}
+
 	info->dev = &pdev->dev;
 	info->max14577 = max14577;
 
diff --git a/drivers/extcon/extcon-max77693.c b/drivers/extcon/extcon-max77693.c
index 2c7c3e191591..77460f2c1ca1 100644
--- a/drivers/extcon/extcon-max77693.c
+++ b/drivers/extcon/extcon-max77693.c
@@ -255,10 +255,10 @@ static int max77693_muic_set_debounce_time(struct max77693_muic_info *info,
 	case ADC_DEBOUNCE_TIME_10MS:
 	case ADC_DEBOUNCE_TIME_25MS:
 	case ADC_DEBOUNCE_TIME_38_62MS:
-		ret = max77693_update_reg(info->max77693->regmap_muic,
+		ret = regmap_update_bits(info->max77693->regmap_muic,
 					  MAX77693_MUIC_REG_CTRL3,
-					  time << CONTROL3_ADCDBSET_SHIFT,
-					  CONTROL3_ADCDBSET_MASK);
+					  CONTROL3_ADCDBSET_MASK,
+					  time << CONTROL3_ADCDBSET_SHIFT);
 		if (ret) {
 			dev_err(info->dev, "failed to set ADC debounce time\n");
 			return ret;
@@ -286,15 +286,15 @@ static int max77693_muic_set_path(struct max77693_muic_info *info,
 		u8 val, bool attached)
 {
 	int ret = 0;
-	u8 ctrl1, ctrl2 = 0;
+	unsigned int ctrl1, ctrl2 = 0;
 
 	if (attached)
 		ctrl1 = val;
 	else
 		ctrl1 = CONTROL1_SW_OPEN;
 
-	ret = max77693_update_reg(info->max77693->regmap_muic,
-			MAX77693_MUIC_REG_CTRL1, ctrl1, COMP_SW_MASK);
+	ret = regmap_update_bits(info->max77693->regmap_muic,
+			MAX77693_MUIC_REG_CTRL1, COMP_SW_MASK, ctrl1);
 	if (ret < 0) {
 		dev_err(info->dev, "failed to update MUIC register\n");
 		return ret;
@@ -305,9 +305,9 @@ static int max77693_muic_set_path(struct max77693_muic_info *info,
 	else
 		ctrl2 |= CONTROL2_LOWPWR_MASK;	/* LowPwr=1, CPEn=0 */
 
-	ret = max77693_update_reg(info->max77693->regmap_muic,
-			MAX77693_MUIC_REG_CTRL2, ctrl2,
-			CONTROL2_LOWPWR_MASK | CONTROL2_CPEN_MASK);
+	ret = regmap_update_bits(info->max77693->regmap_muic,
+			MAX77693_MUIC_REG_CTRL2,
+			CONTROL2_LOWPWR_MASK | CONTROL2_CPEN_MASK, ctrl2);
 	if (ret < 0) {
 		dev_err(info->dev, "failed to update MUIC register\n");
 		return ret;
@@ -969,8 +969,8 @@ static void max77693_muic_irq_work(struct work_struct *work)
 		if (info->irq == muic_irqs[i].virq)
 			irq_type = muic_irqs[i].irq;
 
-	ret = max77693_bulk_read(info->max77693->regmap_muic,
-			MAX77693_MUIC_REG_STATUS1, 2, info->status);
+	ret = regmap_bulk_read(info->max77693->regmap_muic,
+			MAX77693_MUIC_REG_STATUS1, info->status, 2);
 	if (ret) {
 		dev_err(info->dev, "failed to read MUIC register\n");
 		mutex_unlock(&info->mutex);
@@ -1042,8 +1042,8 @@ static int max77693_muic_detect_accessory(struct max77693_muic_info *info)
 	mutex_lock(&info->mutex);
 
 	/* Read STATUSx register to detect accessory */
-	ret = max77693_bulk_read(info->max77693->regmap_muic,
-			MAX77693_MUIC_REG_STATUS1, 2, info->status);
+	ret = regmap_bulk_read(info->max77693->regmap_muic,
+			MAX77693_MUIC_REG_STATUS1, info->status, 2);
 	if (ret) {
 		dev_err(info->dev, "failed to read MUIC register\n");
 		mutex_unlock(&info->mutex);
@@ -1095,14 +1095,13 @@ static int max77693_muic_probe(struct platform_device *pdev)
 	int delay_jiffies;
 	int ret;
 	int i;
-	u8 id;
+	unsigned int id;
 
 	info = devm_kzalloc(&pdev->dev, sizeof(struct max77693_muic_info),
 				   GFP_KERNEL);
-	if (!info) {
-		dev_err(&pdev->dev, "failed to allocate memory\n");
+	if (!info)
 		return -ENOMEM;
-	}
+
 	info->dev = &pdev->dev;
 	info->max77693 = max77693;
 	if (info->max77693->regmap_muic) {
@@ -1154,7 +1153,8 @@ static int max77693_muic_probe(struct platform_device *pdev)
 		struct max77693_muic_irq *muic_irq = &muic_irqs[i];
 		unsigned int virq = 0;
 
-		virq = irq_create_mapping(max77693->irq_domain, muic_irq->irq);
+		virq = regmap_irq_get_virq(max77693->irq_data_muic,
+					muic_irq->irq);
 		if (!virq) {
 			ret = -EINVAL;
 			goto err_irq;
@@ -1183,7 +1183,6 @@ static int max77693_muic_probe(struct platform_device *pdev)
 		goto err_irq;
 	}
 	info->edev->name = DEV_NAME;
-	info->edev->dev.parent = &pdev->dev;
 
 	ret = devm_extcon_dev_register(&pdev->dev, info->edev);
 	if (ret) {
@@ -1204,7 +1203,7 @@ static int max77693_muic_probe(struct platform_device *pdev)
 		enum max77693_irq_source irq_src
 				= MAX77693_IRQ_GROUP_NR;
 
-		max77693_write_reg(info->max77693->regmap_muic,
+		regmap_write(info->max77693->regmap_muic,
 				init_data[i].addr,
 				init_data[i].data);
 
@@ -1262,7 +1261,7 @@ static int max77693_muic_probe(struct platform_device *pdev)
 	 max77693_muic_set_path(info, info->path_uart, true);
 
 	/* Check revision number of MUIC device*/
-	ret = max77693_read_reg(info->max77693->regmap_muic,
+	ret = regmap_read(info->max77693->regmap_muic,
 			MAX77693_MUIC_REG_ID, &id);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed to read revision number\n");
diff --git a/drivers/extcon/extcon-max8997.c b/drivers/extcon/extcon-max8997.c
index d9f7f1baaa03..75e501c98005 100644
--- a/drivers/extcon/extcon-max8997.c
+++ b/drivers/extcon/extcon-max8997.c
@@ -661,10 +661,8 @@ static int max8997_muic_probe(struct platform_device *pdev)
 
 	info = devm_kzalloc(&pdev->dev, sizeof(struct max8997_muic_info),
 			    GFP_KERNEL);
-	if (!info) {
-		dev_err(&pdev->dev, "failed to allocate memory\n");
+	if (!info)
 		return -ENOMEM;
-	}
 
 	info->dev = &pdev->dev;
 	info->muic = max8997->muic;
@@ -706,7 +704,6 @@ static int max8997_muic_probe(struct platform_device *pdev)
 		goto err_irq;
 	}
 	info->edev->name = DEV_NAME;
-	info->edev->dev.parent = &pdev->dev;
 
 	ret = devm_extcon_dev_register(&pdev->dev, info->edev);
 	if (ret) {
diff --git a/drivers/extcon/extcon-palmas.c b/drivers/extcon/extcon-palmas.c
index 7417ce84eb2d..230e1220ce48 100644
--- a/drivers/extcon/extcon-palmas.c
+++ b/drivers/extcon/extcon-palmas.c
@@ -194,7 +194,6 @@ static int palmas_usb_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 	palmas_usb->edev->name = kstrdup(node->name, GFP_KERNEL);
-	palmas_usb->edev->dev.parent = palmas_usb->dev;
 	palmas_usb->edev->mutually_exclusive = mutually_exclusive;
 
 	status = devm_extcon_dev_register(&pdev->dev, palmas_usb->edev);
@@ -278,7 +277,7 @@ static int palmas_usb_resume(struct device *dev)
 
 static SIMPLE_DEV_PM_OPS(palmas_pm_ops, palmas_usb_suspend, palmas_usb_resume);
 
-static struct of_device_id of_palmas_match_tbl[] = {
+static const struct of_device_id of_palmas_match_tbl[] = {
 	{ .compatible = "ti,palmas-usb", },
 	{ .compatible = "ti,palmas-usb-vid", },
 	{ .compatible = "ti,twl6035-usb", },
diff --git a/drivers/extcon/extcon-sm5502.c b/drivers/extcon/extcon-sm5502.c
new file mode 100644
index 000000000000..560d7dccec7b
--- /dev/null
+++ b/drivers/extcon/extcon-sm5502.c
@@ -0,0 +1,724 @@
+/*
+ * extcon-sm5502.c - Silicon Mitus SM5502 extcon drvier to support USB switches
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd
+ * Author: Chanwoo Choi <cw00.choi@samsung.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/irqdomain.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/extcon.h>
+#include <linux/extcon/sm5502.h>
+
+#define	DELAY_MS_DEFAULT		17000	/* unit: millisecond */
+
+struct muic_irq {
+	unsigned int irq;
+	const char *name;
+	unsigned int virq;
+};
+
+struct reg_data {
+	u8 reg;
+	unsigned int val;
+	bool invert;
+};
+
+struct sm5502_muic_info {
+	struct device *dev;
+	struct extcon_dev *edev;
+
+	struct i2c_client *i2c;
+	struct regmap *regmap;
+
+	struct regmap_irq_chip_data *irq_data;
+	struct muic_irq *muic_irqs;
+	unsigned int num_muic_irqs;
+	int irq;
+	bool irq_attach;
+	bool irq_detach;
+	struct work_struct irq_work;
+
+	struct reg_data *reg_data;
+	unsigned int num_reg_data;
+
+	struct mutex mutex;
+
+	/*
+	 * Use delayed workqueue to detect cable state and then
+	 * notify cable state to notifiee/platform through uevent.
+	 * After completing the booting of platform, the extcon provider
+	 * driver should notify cable state to upper layer.
+	 */
+	struct delayed_work wq_detcable;
+};
+
+/* Default value of SM5502 register to bring up MUIC device. */
+static struct reg_data sm5502_reg_data[] = {
+	{
+		.reg = SM5502_REG_CONTROL,
+		.val = SM5502_REG_CONTROL_MASK_INT_MASK,
+		.invert = false,
+	}, {
+		.reg = SM5502_REG_INTMASK1,
+		.val = SM5502_REG_INTM1_KP_MASK
+			| SM5502_REG_INTM1_LKP_MASK
+			| SM5502_REG_INTM1_LKR_MASK,
+		.invert = true,
+	}, {
+		.reg = SM5502_REG_INTMASK2,
+		.val = SM5502_REG_INTM2_VBUS_DET_MASK
+			| SM5502_REG_INTM2_REV_ACCE_MASK
+			| SM5502_REG_INTM2_ADC_CHG_MASK
+			| SM5502_REG_INTM2_STUCK_KEY_MASK
+			| SM5502_REG_INTM2_STUCK_KEY_RCV_MASK
+			| SM5502_REG_INTM2_MHL_MASK,
+		.invert = true,
+	},
+	{ }
+};
+
+/* List of detectable cables */
+enum {
+	EXTCON_CABLE_USB = 0,
+	EXTCON_CABLE_USB_HOST,
+	EXTCON_CABLE_TA,
+
+	EXTCON_CABLE_END,
+};
+
+static const char *sm5502_extcon_cable[] = {
+	[EXTCON_CABLE_USB]	= "USB",
+	[EXTCON_CABLE_USB_HOST]	= "USB-Host",
+	[EXTCON_CABLE_TA]	= "TA",
+	NULL,
+};
+
+/* Define supported accessory type */
+enum sm5502_muic_acc_type {
+	SM5502_MUIC_ADC_GROUND = 0x0,
+	SM5502_MUIC_ADC_SEND_END_BUTTON,
+	SM5502_MUIC_ADC_REMOTE_S1_BUTTON,
+	SM5502_MUIC_ADC_REMOTE_S2_BUTTON,
+	SM5502_MUIC_ADC_REMOTE_S3_BUTTON,
+	SM5502_MUIC_ADC_REMOTE_S4_BUTTON,
+	SM5502_MUIC_ADC_REMOTE_S5_BUTTON,
+	SM5502_MUIC_ADC_REMOTE_S6_BUTTON,
+	SM5502_MUIC_ADC_REMOTE_S7_BUTTON,
+	SM5502_MUIC_ADC_REMOTE_S8_BUTTON,
+	SM5502_MUIC_ADC_REMOTE_S9_BUTTON,
+	SM5502_MUIC_ADC_REMOTE_S10_BUTTON,
+	SM5502_MUIC_ADC_REMOTE_S11_BUTTON,
+	SM5502_MUIC_ADC_REMOTE_S12_BUTTON,
+	SM5502_MUIC_ADC_RESERVED_ACC_1,
+	SM5502_MUIC_ADC_RESERVED_ACC_2,
+	SM5502_MUIC_ADC_RESERVED_ACC_3,
+	SM5502_MUIC_ADC_RESERVED_ACC_4,
+	SM5502_MUIC_ADC_RESERVED_ACC_5,
+	SM5502_MUIC_ADC_AUDIO_TYPE2,
+	SM5502_MUIC_ADC_PHONE_POWERED_DEV,
+	SM5502_MUIC_ADC_TTY_CONVERTER,
+	SM5502_MUIC_ADC_UART_CABLE,
+	SM5502_MUIC_ADC_TYPE1_CHARGER,
+	SM5502_MUIC_ADC_FACTORY_MODE_BOOT_OFF_USB,
+	SM5502_MUIC_ADC_FACTORY_MODE_BOOT_ON_USB,
+	SM5502_MUIC_ADC_AUDIO_VIDEO_CABLE,
+	SM5502_MUIC_ADC_TYPE2_CHARGER,
+	SM5502_MUIC_ADC_FACTORY_MODE_BOOT_OFF_UART,
+	SM5502_MUIC_ADC_FACTORY_MODE_BOOT_ON_UART,
+	SM5502_MUIC_ADC_AUDIO_TYPE1,
+	SM5502_MUIC_ADC_OPEN = 0x1f,
+
+	/* The below accessories have same ADC value (0x1f or 0x1e).
+	   So, Device type1 is used to separate specific accessory. */
+							/* |---------|--ADC| */
+							/* |    [7:5]|[4:0]| */
+	SM5502_MUIC_ADC_AUDIO_TYPE1_FULL_REMOTE = 0x3e,	/* |      001|11110| */
+	SM5502_MUIC_ADC_AUDIO_TYPE1_SEND_END = 0x5e,	/* |      010|11110| */
+							/* |Dev Type1|--ADC| */
+	SM5502_MUIC_ADC_OPEN_USB = 0x5f,		/* |      010|11111| */
+	SM5502_MUIC_ADC_OPEN_TA = 0xdf,			/* |      110|11111| */
+	SM5502_MUIC_ADC_OPEN_USB_OTG = 0xff,		/* |      111|11111| */
+};
+
+/* List of supported interrupt for SM5502 */
+static struct muic_irq sm5502_muic_irqs[] = {
+	{ SM5502_IRQ_INT1_ATTACH,	"muic-attach" },
+	{ SM5502_IRQ_INT1_DETACH,	"muic-detach" },
+	{ SM5502_IRQ_INT1_KP,		"muic-kp" },
+	{ SM5502_IRQ_INT1_LKP,		"muic-lkp" },
+	{ SM5502_IRQ_INT1_LKR,		"muic-lkr" },
+	{ SM5502_IRQ_INT1_OVP_EVENT,	"muic-ovp-event" },
+	{ SM5502_IRQ_INT1_OCP_EVENT,	"muic-ocp-event" },
+	{ SM5502_IRQ_INT1_OVP_OCP_DIS,	"muic-ovp-ocp-dis" },
+	{ SM5502_IRQ_INT2_VBUS_DET,	"muic-vbus-det" },
+	{ SM5502_IRQ_INT2_REV_ACCE,	"muic-rev-acce" },
+	{ SM5502_IRQ_INT2_ADC_CHG,	"muic-adc-chg" },
+	{ SM5502_IRQ_INT2_STUCK_KEY,	"muic-stuck-key" },
+	{ SM5502_IRQ_INT2_STUCK_KEY_RCV, "muic-stuck-key-rcv" },
+	{ SM5502_IRQ_INT2_MHL,		"muic-mhl" },
+};
+
+/* Define interrupt list of SM5502 to register regmap_irq */
+static const struct regmap_irq sm5502_irqs[] = {
+	/* INT1 interrupts */
+	{ .reg_offset = 0, .mask = SM5502_IRQ_INT1_ATTACH_MASK, },
+	{ .reg_offset = 0, .mask = SM5502_IRQ_INT1_DETACH_MASK, },
+	{ .reg_offset = 0, .mask = SM5502_IRQ_INT1_KP_MASK, },
+	{ .reg_offset = 0, .mask = SM5502_IRQ_INT1_LKP_MASK, },
+	{ .reg_offset = 0, .mask = SM5502_IRQ_INT1_LKR_MASK, },
+	{ .reg_offset = 0, .mask = SM5502_IRQ_INT1_OVP_EVENT_MASK, },
+	{ .reg_offset = 0, .mask = SM5502_IRQ_INT1_OCP_EVENT_MASK, },
+	{ .reg_offset = 0, .mask = SM5502_IRQ_INT1_OVP_OCP_DIS_MASK, },
+
+	/* INT2 interrupts */
+	{ .reg_offset = 1, .mask = SM5502_IRQ_INT2_VBUS_DET_MASK,},
+	{ .reg_offset = 1, .mask = SM5502_IRQ_INT2_REV_ACCE_MASK, },
+	{ .reg_offset = 1, .mask = SM5502_IRQ_INT2_ADC_CHG_MASK, },
+	{ .reg_offset = 1, .mask = SM5502_IRQ_INT2_STUCK_KEY_MASK, },
+	{ .reg_offset = 1, .mask = SM5502_IRQ_INT2_STUCK_KEY_RCV_MASK, },
+	{ .reg_offset = 1, .mask = SM5502_IRQ_INT2_MHL_MASK, },
+};
+
+static const struct regmap_irq_chip sm5502_muic_irq_chip = {
+	.name			= "sm5502",
+	.status_base		= SM5502_REG_INT1,
+	.mask_base		= SM5502_REG_INTMASK1,
+	.mask_invert		= false,
+	.num_regs		= 2,
+	.irqs			= sm5502_irqs,
+	.num_irqs		= ARRAY_SIZE(sm5502_irqs),
+};
+
+/* Define regmap configuration of SM5502 for I2C communication  */
+static bool sm5502_muic_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case SM5502_REG_INTMASK1:
+	case SM5502_REG_INTMASK2:
+		return true;
+	default:
+		break;
+	}
+	return false;
+}
+
+static const struct regmap_config sm5502_muic_regmap_config = {
+	.reg_bits	= 8,
+	.val_bits	= 8,
+	.volatile_reg	= sm5502_muic_volatile_reg,
+	.max_register	= SM5502_REG_END,
+};
+
+/* Change DM_CON/DP_CON/VBUSIN switch according to cable type */
+static int sm5502_muic_set_path(struct sm5502_muic_info *info,
+				unsigned int con_sw, unsigned int vbus_sw,
+				bool attached)
+{
+	int ret;
+
+	if (!attached) {
+		con_sw	= DM_DP_SWITCH_OPEN;
+		vbus_sw	= VBUSIN_SWITCH_OPEN;
+	}
+
+	switch (con_sw) {
+	case DM_DP_SWITCH_OPEN:
+	case DM_DP_SWITCH_USB:
+	case DM_DP_SWITCH_AUDIO:
+	case DM_DP_SWITCH_UART:
+		ret = regmap_update_bits(info->regmap, SM5502_REG_MANUAL_SW1,
+					 SM5502_REG_MANUAL_SW1_DP_MASK |
+					 SM5502_REG_MANUAL_SW1_DM_MASK,
+					 con_sw);
+		if (ret < 0) {
+			dev_err(info->dev,
+				"cannot update DM_CON/DP_CON switch\n");
+			return ret;
+		}
+		break;
+	default:
+		dev_err(info->dev, "Unknown DM_CON/DP_CON switch type (%d)\n",
+				con_sw);
+		return -EINVAL;
+	};
+
+	switch (vbus_sw) {
+	case VBUSIN_SWITCH_OPEN:
+	case VBUSIN_SWITCH_VBUSOUT:
+	case VBUSIN_SWITCH_MIC:
+	case VBUSIN_SWITCH_VBUSOUT_WITH_USB:
+		ret = regmap_update_bits(info->regmap, SM5502_REG_MANUAL_SW1,
+					 SM5502_REG_MANUAL_SW1_VBUSIN_MASK,
+					 vbus_sw);
+		if (ret < 0) {
+			dev_err(info->dev,
+				"cannot update VBUSIN switch\n");
+			return ret;
+		}
+		break;
+	default:
+		dev_err(info->dev, "Unknown VBUS switch type (%d)\n", vbus_sw);
+		return -EINVAL;
+	};
+
+	return 0;
+}
+
+/* Return cable type of attached or detached accessories */
+static unsigned int sm5502_muic_get_cable_type(struct sm5502_muic_info *info)
+{
+	unsigned int cable_type = -1, adc, dev_type1;
+	int ret;
+
+	/* Read ADC value according to external cable or button */
+	ret = regmap_read(info->regmap, SM5502_REG_ADC, &adc);
+	if (ret) {
+		dev_err(info->dev, "failed to read ADC register\n");
+		return ret;
+	}
+
+	/*
+	 * If ADC is SM5502_MUIC_ADC_GROUND(0x0), external cable hasn't
+	 * connected with to MUIC device.
+	 */
+	cable_type &= SM5502_REG_ADC_MASK;
+	if (cable_type == SM5502_MUIC_ADC_GROUND)
+		return SM5502_MUIC_ADC_GROUND;
+
+	switch (cable_type) {
+	case SM5502_MUIC_ADC_GROUND:
+	case SM5502_MUIC_ADC_SEND_END_BUTTON:
+	case SM5502_MUIC_ADC_REMOTE_S1_BUTTON:
+	case SM5502_MUIC_ADC_REMOTE_S2_BUTTON:
+	case SM5502_MUIC_ADC_REMOTE_S3_BUTTON:
+	case SM5502_MUIC_ADC_REMOTE_S4_BUTTON:
+	case SM5502_MUIC_ADC_REMOTE_S5_BUTTON:
+	case SM5502_MUIC_ADC_REMOTE_S6_BUTTON:
+	case SM5502_MUIC_ADC_REMOTE_S7_BUTTON:
+	case SM5502_MUIC_ADC_REMOTE_S8_BUTTON:
+	case SM5502_MUIC_ADC_REMOTE_S9_BUTTON:
+	case SM5502_MUIC_ADC_REMOTE_S10_BUTTON:
+	case SM5502_MUIC_ADC_REMOTE_S11_BUTTON:
+	case SM5502_MUIC_ADC_REMOTE_S12_BUTTON:
+	case SM5502_MUIC_ADC_RESERVED_ACC_1:
+	case SM5502_MUIC_ADC_RESERVED_ACC_2:
+	case SM5502_MUIC_ADC_RESERVED_ACC_3:
+	case SM5502_MUIC_ADC_RESERVED_ACC_4:
+	case SM5502_MUIC_ADC_RESERVED_ACC_5:
+	case SM5502_MUIC_ADC_AUDIO_TYPE2:
+	case SM5502_MUIC_ADC_PHONE_POWERED_DEV:
+	case SM5502_MUIC_ADC_TTY_CONVERTER:
+	case SM5502_MUIC_ADC_UART_CABLE:
+	case SM5502_MUIC_ADC_TYPE1_CHARGER:
+	case SM5502_MUIC_ADC_FACTORY_MODE_BOOT_OFF_USB:
+	case SM5502_MUIC_ADC_FACTORY_MODE_BOOT_ON_USB:
+	case SM5502_MUIC_ADC_AUDIO_VIDEO_CABLE:
+	case SM5502_MUIC_ADC_TYPE2_CHARGER:
+	case SM5502_MUIC_ADC_FACTORY_MODE_BOOT_OFF_UART:
+	case SM5502_MUIC_ADC_FACTORY_MODE_BOOT_ON_UART:
+		break;
+	case SM5502_MUIC_ADC_AUDIO_TYPE1:
+		/*
+		 * Check whether cable type is
+		 * SM5502_MUIC_ADC_AUDIO_TYPE1_FULL_REMOTE
+		 * or SM5502_MUIC_ADC_AUDIO_TYPE1_SEND_END
+		 * by using Button event.
+		 */
+		break;
+	case SM5502_MUIC_ADC_OPEN:
+		ret = regmap_read(info->regmap, SM5502_REG_DEV_TYPE1,
+				  &dev_type1);
+		if (ret) {
+			dev_err(info->dev, "failed to read DEV_TYPE1 reg\n");
+			return ret;
+		}
+
+		switch (dev_type1) {
+		case SM5502_REG_DEV_TYPE1_USB_SDP_MASK:
+			cable_type = SM5502_MUIC_ADC_OPEN_USB;
+			break;
+		case SM5502_REG_DEV_TYPE1_DEDICATED_CHG_MASK:
+			cable_type = SM5502_MUIC_ADC_OPEN_TA;
+			break;
+		case SM5502_REG_DEV_TYPE1_USB_OTG_MASK:
+			cable_type = SM5502_MUIC_ADC_OPEN_USB_OTG;
+			break;
+		default:
+			dev_dbg(info->dev,
+				"cannot identify the cable type: adc(0x%x) "
+				"dev_type1(0x%x)\n", adc, dev_type1);
+			return -EINVAL;
+		};
+		break;
+	default:
+		dev_err(info->dev,
+			"failed to identify the cable type: adc(0x%x)\n", adc);
+		return -EINVAL;
+	};
+
+	return cable_type;
+}
+
+static int sm5502_muic_cable_handler(struct sm5502_muic_info *info,
+				     bool attached)
+{
+	static unsigned int prev_cable_type = SM5502_MUIC_ADC_GROUND;
+	const char **cable_names = info->edev->supported_cable;
+	unsigned int cable_type = SM5502_MUIC_ADC_GROUND;
+	unsigned int con_sw = DM_DP_SWITCH_OPEN;
+	unsigned int vbus_sw = VBUSIN_SWITCH_OPEN;
+	unsigned int idx = 0;
+	int ret;
+
+	if (!cable_names)
+		return 0;
+
+	/* Get the type of attached or detached cable */
+	if (attached)
+		cable_type = sm5502_muic_get_cable_type(info);
+	else if (!attached)
+		cable_type = prev_cable_type;
+	prev_cable_type = cable_type;
+
+	switch (cable_type) {
+	case SM5502_MUIC_ADC_OPEN_USB:
+		idx	= EXTCON_CABLE_USB;
+		con_sw	= DM_DP_SWITCH_USB;
+		vbus_sw	= VBUSIN_SWITCH_VBUSOUT_WITH_USB;
+		break;
+	case SM5502_MUIC_ADC_OPEN_TA:
+		idx	= EXTCON_CABLE_TA;
+		con_sw	= DM_DP_SWITCH_OPEN;
+		vbus_sw	= VBUSIN_SWITCH_VBUSOUT;
+		break;
+	case SM5502_MUIC_ADC_OPEN_USB_OTG:
+		idx	= EXTCON_CABLE_USB_HOST;
+		con_sw	= DM_DP_SWITCH_USB;
+		vbus_sw	= VBUSIN_SWITCH_OPEN;
+		break;
+	default:
+		dev_dbg(info->dev,
+			"cannot handle this cable_type (0x%x)\n", cable_type);
+		return 0;
+	};
+
+	/* Change internal hardware path(DM_CON/DP_CON, VBUSIN) */
+	ret = sm5502_muic_set_path(info, con_sw, vbus_sw, attached);
+	if (ret < 0)
+		return ret;
+
+	/* Change the state of external accessory */
+	extcon_set_cable_state(info->edev, cable_names[idx], attached);
+
+	return 0;
+}
+
+static void sm5502_muic_irq_work(struct work_struct *work)
+{
+	struct sm5502_muic_info *info = container_of(work,
+			struct sm5502_muic_info, irq_work);
+	int ret = 0;
+
+	if (!info->edev)
+		return;
+
+	mutex_lock(&info->mutex);
+
+	/* Detect attached or detached cables */
+	if (info->irq_attach) {
+		ret = sm5502_muic_cable_handler(info, true);
+		info->irq_attach = false;
+	}
+	if (info->irq_detach) {
+		ret = sm5502_muic_cable_handler(info, false);
+		info->irq_detach = false;
+	}
+
+	if (ret < 0)
+		dev_err(info->dev, "failed to handle MUIC interrupt\n");
+
+	mutex_unlock(&info->mutex);
+
+	return;
+}
+
+/*
+ * Sets irq_attach or irq_detach in sm5502_muic_info and returns 0.
+ * Returns -ESRCH if irq_type does not match registered IRQ for this dev type.
+ */
+static int sm5502_parse_irq(struct sm5502_muic_info *info, int irq_type)
+{
+	switch (irq_type) {
+	case SM5502_IRQ_INT1_ATTACH:
+		info->irq_attach = true;
+		break;
+	case SM5502_IRQ_INT1_DETACH:
+		info->irq_detach = true;
+		break;
+	case SM5502_IRQ_INT1_KP:
+	case SM5502_IRQ_INT1_LKP:
+	case SM5502_IRQ_INT1_LKR:
+	case SM5502_IRQ_INT1_OVP_EVENT:
+	case SM5502_IRQ_INT1_OCP_EVENT:
+	case SM5502_IRQ_INT1_OVP_OCP_DIS:
+	case SM5502_IRQ_INT2_VBUS_DET:
+	case SM5502_IRQ_INT2_REV_ACCE:
+	case SM5502_IRQ_INT2_ADC_CHG:
+	case SM5502_IRQ_INT2_STUCK_KEY:
+	case SM5502_IRQ_INT2_STUCK_KEY_RCV:
+	case SM5502_IRQ_INT2_MHL:
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static irqreturn_t sm5502_muic_irq_handler(int irq, void *data)
+{
+	struct sm5502_muic_info *info = data;
+	int i, irq_type = -1, ret;
+
+	for (i = 0; i < info->num_muic_irqs; i++)
+		if (irq == info->muic_irqs[i].virq)
+			irq_type = info->muic_irqs[i].irq;
+
+	ret = sm5502_parse_irq(info, irq_type);
+	if (ret < 0) {
+		dev_warn(info->dev, "cannot handle is interrupt:%d\n",
+				    irq_type);
+		return IRQ_HANDLED;
+	}
+	schedule_work(&info->irq_work);
+
+	return IRQ_HANDLED;
+}
+
+static void sm5502_muic_detect_cable_wq(struct work_struct *work)
+{
+	struct sm5502_muic_info *info = container_of(to_delayed_work(work),
+				struct sm5502_muic_info, wq_detcable);
+	int ret;
+
+	/* Notify the state of connector cable or not  */
+	ret = sm5502_muic_cable_handler(info, true);
+	if (ret < 0)
+		dev_warn(info->dev, "failed to detect cable state\n");
+}
+
+static void sm5502_init_dev_type(struct sm5502_muic_info *info)
+{
+	unsigned int reg_data, vendor_id, version_id;
+	int i, ret;
+
+	/* To test I2C, Print version_id and vendor_id of SM5502 */
+	ret = regmap_read(info->regmap, SM5502_REG_DEVICE_ID, &reg_data);
+	if (ret) {
+		dev_err(info->dev,
+			"failed to read DEVICE_ID register: %d\n", ret);
+		return;
+	}
+
+	vendor_id = ((reg_data & SM5502_REG_DEVICE_ID_VENDOR_MASK) >>
+				SM5502_REG_DEVICE_ID_VENDOR_SHIFT);
+	version_id = ((reg_data & SM5502_REG_DEVICE_ID_VERSION_MASK) >>
+				SM5502_REG_DEVICE_ID_VERSION_SHIFT);
+
+	dev_info(info->dev, "Device type: version: 0x%x, vendor: 0x%x\n",
+			    version_id, vendor_id);
+
+	/* Initiazle the register of SM5502 device to bring-up */
+	for (i = 0; i < info->num_reg_data; i++) {
+		unsigned int val = 0;
+
+		if (!info->reg_data[i].invert)
+			val |= ~info->reg_data[i].val;
+		else
+			val = info->reg_data[i].val;
+		regmap_write(info->regmap, info->reg_data[i].reg, val);
+	}
+}
+
+static int sm5022_muic_i2c_probe(struct i2c_client *i2c,
+				 const struct i2c_device_id *id)
+{
+	struct device_node *np = i2c->dev.of_node;
+	struct sm5502_muic_info *info;
+	int i, ret, irq_flags;
+
+	if (!np)
+		return -EINVAL;
+
+	info = devm_kzalloc(&i2c->dev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+	i2c_set_clientdata(i2c, info);
+
+	info->dev = &i2c->dev;
+	info->i2c = i2c;
+	info->irq = i2c->irq;
+	info->muic_irqs = sm5502_muic_irqs;
+	info->num_muic_irqs = ARRAY_SIZE(sm5502_muic_irqs);
+	info->reg_data = sm5502_reg_data;
+	info->num_reg_data = ARRAY_SIZE(sm5502_reg_data);
+
+	mutex_init(&info->mutex);
+
+	INIT_WORK(&info->irq_work, sm5502_muic_irq_work);
+
+	info->regmap = devm_regmap_init_i2c(i2c, &sm5502_muic_regmap_config);
+	if (IS_ERR(info->regmap)) {
+		ret = PTR_ERR(info->regmap);
+		dev_err(info->dev, "failed to allocate register map: %d\n",
+				   ret);
+		return ret;
+	}
+
+	/* Support irq domain for SM5502 MUIC device */
+	irq_flags = IRQF_TRIGGER_FALLING | IRQF_ONESHOT | IRQF_SHARED;
+	ret = regmap_add_irq_chip(info->regmap, info->irq, irq_flags, 0,
+				  &sm5502_muic_irq_chip, &info->irq_data);
+	if (ret != 0) {
+		dev_err(info->dev, "failed to request IRQ %d: %d\n",
+				    info->irq, ret);
+		return ret;
+	}
+
+	for (i = 0; i < info->num_muic_irqs; i++) {
+		struct muic_irq *muic_irq = &info->muic_irqs[i];
+		unsigned int virq = 0;
+
+		virq = regmap_irq_get_virq(info->irq_data, muic_irq->irq);
+		if (virq <= 0)
+			return -EINVAL;
+		muic_irq->virq = virq;
+
+		ret = devm_request_threaded_irq(info->dev, virq, NULL,
+						sm5502_muic_irq_handler,
+						IRQF_NO_SUSPEND,
+						muic_irq->name, info);
+		if (ret) {
+			dev_err(info->dev, "failed: irq request (IRQ: %d,"
+				" error :%d)\n", muic_irq->irq, ret);
+			return ret;
+		}
+	}
+
+	/* Allocate extcon device */
+	info->edev = devm_extcon_dev_allocate(info->dev, sm5502_extcon_cable);
+	if (IS_ERR(info->edev)) {
+		dev_err(info->dev, "failed to allocate memory for extcon\n");
+		return -ENOMEM;
+	}
+	info->edev->name = np->name;
+
+	/* Register extcon device */
+	ret = devm_extcon_dev_register(info->dev, info->edev);
+	if (ret) {
+		dev_err(info->dev, "failed to register extcon device\n");
+		return ret;
+	}
+
+	/*
+	 * Detect accessory after completing the initialization of platform
+	 *
+	 * - Use delayed workqueue to detect cable state and then
+	 * notify cable state to notifiee/platform through uevent.
+	 * After completing the booting of platform, the extcon provider
+	 * driver should notify cable state to upper layer.
+	 */
+	INIT_DELAYED_WORK(&info->wq_detcable, sm5502_muic_detect_cable_wq);
+	queue_delayed_work(system_power_efficient_wq, &info->wq_detcable,
+			msecs_to_jiffies(DELAY_MS_DEFAULT));
+
+	/* Initialize SM5502 device and print vendor id and version id */
+	sm5502_init_dev_type(info);
+
+	return 0;
+}
+
+static int sm5502_muic_i2c_remove(struct i2c_client *i2c)
+{
+	struct sm5502_muic_info *info = i2c_get_clientdata(i2c);
+
+	regmap_del_irq_chip(info->irq, info->irq_data);
+
+	return 0;
+}
+
+static struct of_device_id sm5502_dt_match[] = {
+	{ .compatible = "siliconmitus,sm5502-muic" },
+	{ },
+};
+
+#ifdef CONFIG_PM_SLEEP
+static int sm5502_muic_suspend(struct device *dev)
+{
+	struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+	struct sm5502_muic_info *info = i2c_get_clientdata(i2c);
+
+	enable_irq_wake(info->irq);
+
+	return 0;
+}
+
+static int sm5502_muic_resume(struct device *dev)
+{
+	struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+	struct sm5502_muic_info *info = i2c_get_clientdata(i2c);
+
+	disable_irq_wake(info->irq);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(sm5502_muic_pm_ops,
+			 sm5502_muic_suspend, sm5502_muic_resume);
+
+static const struct i2c_device_id sm5502_i2c_id[] = {
+	{ "sm5502", TYPE_SM5502 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, sm5502_i2c_id);
+
+static struct i2c_driver sm5502_muic_i2c_driver = {
+	.driver		= {
+		.name	= "sm5502",
+		.owner	= THIS_MODULE,
+		.pm	= &sm5502_muic_pm_ops,
+		.of_match_table = sm5502_dt_match,
+	},
+	.probe	= sm5022_muic_i2c_probe,
+	.remove	= sm5502_muic_i2c_remove,
+	.id_table = sm5502_i2c_id,
+};
+
+static int __init sm5502_muic_i2c_init(void)
+{
+	return i2c_add_driver(&sm5502_muic_i2c_driver);
+}
+subsys_initcall(sm5502_muic_i2c_init);
+
+MODULE_DESCRIPTION("Silicon Mitus SM5502 Extcon driver");
+MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 6cc4b6acc22a..fb824f501197 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -384,6 +384,7 @@ config MFD_MAX77693
 	depends on I2C=y
 	select MFD_CORE
 	select REGMAP_I2C
+	select REGMAP_IRQ
 	help
 	  Say yes here to add support for Maxim Semiconductor MAX77693.
 	  This is a companion Power Management IC with Flash, Haptic, Charger,
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 8afedba535c7..8c6e7bba4660 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -116,7 +116,7 @@ obj-$(CONFIG_MFD_DA9063)	+= da9063.o
 
 obj-$(CONFIG_MFD_MAX14577)	+= max14577.o
 obj-$(CONFIG_MFD_MAX77686)	+= max77686.o max77686-irq.o
-obj-$(CONFIG_MFD_MAX77693)	+= max77693.o max77693-irq.o
+obj-$(CONFIG_MFD_MAX77693)	+= max77693.o
 obj-$(CONFIG_MFD_MAX8907)	+= max8907.o
 max8925-objs			:= max8925-core.o max8925-i2c.o
 obj-$(CONFIG_MFD_MAX8925)	+= max8925.o
diff --git a/drivers/mfd/max77693-irq.c b/drivers/mfd/max77693-irq.c
deleted file mode 100644
index 66b58fe77094..000000000000
--- a/drivers/mfd/max77693-irq.c
+++ /dev/null
@@ -1,336 +0,0 @@
-/*
- * max77693-irq.c - Interrupt controller support for MAX77693
- *
- * Copyright (C) 2012 Samsung Electronics Co.Ltd
- * SangYoung Son <hello.son@samsung.com>
- *
- * This program is not provided / owned by Maxim Integrated Products.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- * This driver is based on max8997-irq.c
- */
-
-#include <linux/err.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/irqdomain.h>
-#include <linux/mfd/max77693.h>
-#include <linux/mfd/max77693-private.h>
-
-static const u8 max77693_mask_reg[] = {
-	[LED_INT] = MAX77693_LED_REG_FLASH_INT_MASK,
-	[TOPSYS_INT] = MAX77693_PMIC_REG_TOPSYS_INT_MASK,
-	[CHG_INT] = MAX77693_CHG_REG_CHG_INT_MASK,
-	[MUIC_INT1] = MAX77693_MUIC_REG_INTMASK1,
-	[MUIC_INT2] = MAX77693_MUIC_REG_INTMASK2,
-	[MUIC_INT3] = MAX77693_MUIC_REG_INTMASK3,
-};
-
-static struct regmap *max77693_get_regmap(struct max77693_dev *max77693,
-				enum max77693_irq_source src)
-{
-	switch (src) {
-	case LED_INT ... CHG_INT:
-		return max77693->regmap;
-	case MUIC_INT1 ... MUIC_INT3:
-		return max77693->regmap_muic;
-	default:
-		return ERR_PTR(-EINVAL);
-	}
-}
-
-struct max77693_irq_data {
-	int mask;
-	enum max77693_irq_source group;
-};
-
-#define DECLARE_IRQ(idx, _group, _mask)		\
-	[(idx)] = { .group = (_group), .mask = (_mask) }
-static const struct max77693_irq_data max77693_irqs[] = {
-	DECLARE_IRQ(MAX77693_LED_IRQ_FLED2_OPEN,	LED_INT, 1 << 0),
-	DECLARE_IRQ(MAX77693_LED_IRQ_FLED2_SHORT,	LED_INT, 1 << 1),
-	DECLARE_IRQ(MAX77693_LED_IRQ_FLED1_OPEN,	LED_INT, 1 << 2),
-	DECLARE_IRQ(MAX77693_LED_IRQ_FLED1_SHORT,	LED_INT, 1 << 3),
-	DECLARE_IRQ(MAX77693_LED_IRQ_MAX_FLASH,		LED_INT, 1 << 4),
-
-	DECLARE_IRQ(MAX77693_TOPSYS_IRQ_T120C_INT,	TOPSYS_INT, 1 << 0),
-	DECLARE_IRQ(MAX77693_TOPSYS_IRQ_T140C_INT,	TOPSYS_INT, 1 << 1),
-	DECLARE_IRQ(MAX77693_TOPSYS_IRQ_LOWSYS_INT,	TOPSYS_INT, 1 << 3),
-
-	DECLARE_IRQ(MAX77693_CHG_IRQ_BYP_I,		CHG_INT, 1 << 0),
-	DECLARE_IRQ(MAX77693_CHG_IRQ_THM_I,		CHG_INT, 1 << 2),
-	DECLARE_IRQ(MAX77693_CHG_IRQ_BAT_I,		CHG_INT, 1 << 3),
-	DECLARE_IRQ(MAX77693_CHG_IRQ_CHG_I,		CHG_INT, 1 << 4),
-	DECLARE_IRQ(MAX77693_CHG_IRQ_CHGIN_I,		CHG_INT, 1 << 6),
-
-	DECLARE_IRQ(MAX77693_MUIC_IRQ_INT1_ADC,		MUIC_INT1, 1 << 0),
-	DECLARE_IRQ(MAX77693_MUIC_IRQ_INT1_ADC_LOW,	MUIC_INT1, 1 << 1),
-	DECLARE_IRQ(MAX77693_MUIC_IRQ_INT1_ADC_ERR,	MUIC_INT1, 1 << 2),
-	DECLARE_IRQ(MAX77693_MUIC_IRQ_INT1_ADC1K,	MUIC_INT1, 1 << 3),
-
-	DECLARE_IRQ(MAX77693_MUIC_IRQ_INT2_CHGTYP,	MUIC_INT2, 1 << 0),
-	DECLARE_IRQ(MAX77693_MUIC_IRQ_INT2_CHGDETREUN,	MUIC_INT2, 1 << 1),
-	DECLARE_IRQ(MAX77693_MUIC_IRQ_INT2_DCDTMR,	MUIC_INT2, 1 << 2),
-	DECLARE_IRQ(MAX77693_MUIC_IRQ_INT2_DXOVP,	MUIC_INT2, 1 << 3),
-	DECLARE_IRQ(MAX77693_MUIC_IRQ_INT2_VBVOLT,	MUIC_INT2, 1 << 4),
-	DECLARE_IRQ(MAX77693_MUIC_IRQ_INT2_VIDRM,	MUIC_INT2, 1 << 5),
-
-	DECLARE_IRQ(MAX77693_MUIC_IRQ_INT3_EOC,		MUIC_INT3, 1 << 0),
-	DECLARE_IRQ(MAX77693_MUIC_IRQ_INT3_CGMBC,	MUIC_INT3, 1 << 1),
-	DECLARE_IRQ(MAX77693_MUIC_IRQ_INT3_OVP,		MUIC_INT3, 1 << 2),
-	DECLARE_IRQ(MAX77693_MUIC_IRQ_INT3_MBCCHG_ERR,	MUIC_INT3, 1 << 3),
-	DECLARE_IRQ(MAX77693_MUIC_IRQ_INT3_CHG_ENABLED,	MUIC_INT3, 1 << 4),
-	DECLARE_IRQ(MAX77693_MUIC_IRQ_INT3_BAT_DET,	MUIC_INT3, 1 << 5),
-};
-
-static void max77693_irq_lock(struct irq_data *data)
-{
-	struct max77693_dev *max77693 = irq_get_chip_data(data->irq);
-
-	mutex_lock(&max77693->irqlock);
-}
-
-static void max77693_irq_sync_unlock(struct irq_data *data)
-{
-	struct max77693_dev *max77693 = irq_get_chip_data(data->irq);
-	int i;
-
-	for (i = 0; i < MAX77693_IRQ_GROUP_NR; i++) {
-		u8 mask_reg = max77693_mask_reg[i];
-		struct regmap *map = max77693_get_regmap(max77693, i);
-
-		if (mask_reg == MAX77693_REG_INVALID ||
-				IS_ERR_OR_NULL(map))
-			continue;
-		max77693->irq_masks_cache[i] = max77693->irq_masks_cur[i];
-
-		max77693_write_reg(map, max77693_mask_reg[i],
-				max77693->irq_masks_cur[i]);
-	}
-
-	mutex_unlock(&max77693->irqlock);
-}
-
-static const inline struct max77693_irq_data *
-irq_to_max77693_irq(struct max77693_dev *max77693, int irq)
-{
-	struct irq_data *data = irq_get_irq_data(irq);
-	return &max77693_irqs[data->hwirq];
-}
-
-static void max77693_irq_mask(struct irq_data *data)
-{
-	struct max77693_dev *max77693 = irq_get_chip_data(data->irq);
-	const struct max77693_irq_data *irq_data =
-				irq_to_max77693_irq(max77693, data->irq);
-
-	if (irq_data->group >= MAX77693_IRQ_GROUP_NR)
-		return;
-
-	if (irq_data->group >= MUIC_INT1 && irq_data->group <= MUIC_INT3)
-		max77693->irq_masks_cur[irq_data->group] &= ~irq_data->mask;
-	else
-		max77693->irq_masks_cur[irq_data->group] |= irq_data->mask;
-}
-
-static void max77693_irq_unmask(struct irq_data *data)
-{
-	struct max77693_dev *max77693 = irq_get_chip_data(data->irq);
-	const struct max77693_irq_data *irq_data =
-	    irq_to_max77693_irq(max77693, data->irq);
-
-	if (irq_data->group >= MAX77693_IRQ_GROUP_NR)
-		return;
-
-	if (irq_data->group >= MUIC_INT1 && irq_data->group <= MUIC_INT3)
-		max77693->irq_masks_cur[irq_data->group] |= irq_data->mask;
-	else
-		max77693->irq_masks_cur[irq_data->group] &= ~irq_data->mask;
-}
-
-static struct irq_chip max77693_irq_chip = {
-	.name			= "max77693",
-	.irq_bus_lock		= max77693_irq_lock,
-	.irq_bus_sync_unlock	= max77693_irq_sync_unlock,
-	.irq_mask		= max77693_irq_mask,
-	.irq_unmask		= max77693_irq_unmask,
-};
-
-#define MAX77693_IRQSRC_CHG		(1 << 0)
-#define MAX77693_IRQSRC_TOP		(1 << 1)
-#define MAX77693_IRQSRC_FLASH		(1 << 2)
-#define MAX77693_IRQSRC_MUIC		(1 << 3)
-static irqreturn_t max77693_irq_thread(int irq, void *data)
-{
-	struct max77693_dev *max77693 = data;
-	u8 irq_reg[MAX77693_IRQ_GROUP_NR] = {};
-	u8 irq_src;
-	int ret;
-	int i, cur_irq;
-
-	ret = max77693_read_reg(max77693->regmap, MAX77693_PMIC_REG_INTSRC,
-				&irq_src);
-	if (ret < 0) {
-		dev_err(max77693->dev, "Failed to read interrupt source: %d\n",
-				ret);
-		return IRQ_NONE;
-	}
-
-	if (irq_src & MAX77693_IRQSRC_CHG)
-		/* CHG_INT */
-		ret = max77693_read_reg(max77693->regmap, MAX77693_CHG_REG_CHG_INT,
-				&irq_reg[CHG_INT]);
-
-	if (irq_src & MAX77693_IRQSRC_TOP)
-		/* TOPSYS_INT */
-		ret = max77693_read_reg(max77693->regmap,
-			MAX77693_PMIC_REG_TOPSYS_INT, &irq_reg[TOPSYS_INT]);
-
-	if (irq_src & MAX77693_IRQSRC_FLASH)
-		/* LED_INT */
-		ret = max77693_read_reg(max77693->regmap,
-			MAX77693_LED_REG_FLASH_INT, &irq_reg[LED_INT]);
-
-	if (irq_src & MAX77693_IRQSRC_MUIC)
-		/* MUIC INT1 ~ INT3 */
-		max77693_bulk_read(max77693->regmap_muic, MAX77693_MUIC_REG_INT1,
-			MAX77693_NUM_IRQ_MUIC_REGS, &irq_reg[MUIC_INT1]);
-
-	/* Apply masking */
-	for (i = 0; i < MAX77693_IRQ_GROUP_NR; i++) {
-		if (i >= MUIC_INT1 && i <= MUIC_INT3)
-			irq_reg[i] &= max77693->irq_masks_cur[i];
-		else
-			irq_reg[i] &= ~max77693->irq_masks_cur[i];
-	}
-
-	/* Report */
-	for (i = 0; i < MAX77693_IRQ_NR; i++) {
-		if (irq_reg[max77693_irqs[i].group] & max77693_irqs[i].mask) {
-			cur_irq = irq_find_mapping(max77693->irq_domain, i);
-			if (cur_irq)
-				handle_nested_irq(cur_irq);
-		}
-	}
-
-	return IRQ_HANDLED;
-}
-
-int max77693_irq_resume(struct max77693_dev *max77693)
-{
-	if (max77693->irq)
-		max77693_irq_thread(0, max77693);
-
-	return 0;
-}
-
-static int max77693_irq_domain_map(struct irq_domain *d, unsigned int irq,
-				irq_hw_number_t hw)
-{
-	struct max77693_dev *max77693 = d->host_data;
-
-	irq_set_chip_data(irq, max77693);
-	irq_set_chip_and_handler(irq, &max77693_irq_chip, handle_edge_irq);
-	irq_set_nested_thread(irq, 1);
-#ifdef CONFIG_ARM
-	set_irq_flags(irq, IRQF_VALID);
-#else
-	irq_set_noprobe(irq);
-#endif
-	return 0;
-}
-
-static struct irq_domain_ops max77693_irq_domain_ops = {
-	.map = max77693_irq_domain_map,
-};
-
-int max77693_irq_init(struct max77693_dev *max77693)
-{
-	struct irq_domain *domain;
-	int i;
-	int ret = 0;
-	u8 intsrc_mask;
-
-	mutex_init(&max77693->irqlock);
-
-	/* Mask individual interrupt sources */
-	for (i = 0; i < MAX77693_IRQ_GROUP_NR; i++) {
-		struct regmap *map;
-		/* MUIC IRQ  0:MASK 1:NOT MASK */
-		/* Other IRQ 1:MASK 0:NOT MASK */
-		if (i >= MUIC_INT1 && i <= MUIC_INT3) {
-			max77693->irq_masks_cur[i] = 0x00;
-			max77693->irq_masks_cache[i] = 0x00;
-		} else {
-			max77693->irq_masks_cur[i] = 0xff;
-			max77693->irq_masks_cache[i] = 0xff;
-		}
-		map = max77693_get_regmap(max77693, i);
-
-		if (IS_ERR_OR_NULL(map))
-			continue;
-		if (max77693_mask_reg[i] == MAX77693_REG_INVALID)
-			continue;
-		if (i >= MUIC_INT1 && i <= MUIC_INT3)
-			max77693_write_reg(map, max77693_mask_reg[i], 0x00);
-		else
-			max77693_write_reg(map, max77693_mask_reg[i], 0xff);
-	}
-
-	domain = irq_domain_add_linear(NULL, MAX77693_IRQ_NR,
-					&max77693_irq_domain_ops, max77693);
-	if (!domain) {
-		dev_err(max77693->dev, "could not create irq domain\n");
-		ret = -ENODEV;
-		goto err_irq;
-	}
-	max77693->irq_domain = domain;
-
-	/* Unmask max77693 interrupt */
-	ret = max77693_read_reg(max77693->regmap,
-			MAX77693_PMIC_REG_INTSRC_MASK, &intsrc_mask);
-	if (ret < 0) {
-		dev_err(max77693->dev, "fail to read PMIC register\n");
-		goto err_irq;
-	}
-
-	intsrc_mask &= ~(MAX77693_IRQSRC_CHG);
-	intsrc_mask &= ~(MAX77693_IRQSRC_FLASH);
-	intsrc_mask &= ~(MAX77693_IRQSRC_MUIC);
-	ret = max77693_write_reg(max77693->regmap,
-			MAX77693_PMIC_REG_INTSRC_MASK, intsrc_mask);
-	if (ret < 0) {
-		dev_err(max77693->dev, "fail to write PMIC register\n");
-		goto err_irq;
-	}
-
-	ret = request_threaded_irq(max77693->irq, NULL, max77693_irq_thread,
-				   IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
-				   "max77693-irq", max77693);
-	if (ret)
-		dev_err(max77693->dev, "Failed to request IRQ %d: %d\n",
-			max77693->irq, ret);
-
-err_irq:
-	return ret;
-}
-
-void max77693_irq_exit(struct max77693_dev *max77693)
-{
-	if (max77693->irq)
-		free_irq(max77693->irq, max77693);
-}
diff --git a/drivers/mfd/max77693.c b/drivers/mfd/max77693.c
index 7e05428c756d..249c139ef04a 100644
--- a/drivers/mfd/max77693.c
+++ b/drivers/mfd/max77693.c
@@ -49,62 +49,62 @@ static const struct mfd_cell max77693_devs[] = {
 	{ .name = "max77693-haptic", },
 };
 
-int max77693_read_reg(struct regmap *map, u8 reg, u8 *dest)
-{
-	unsigned int val;
-	int ret;
-
-	ret = regmap_read(map, reg, &val);
-	*dest = val;
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(max77693_read_reg);
-
-int max77693_bulk_read(struct regmap *map, u8 reg, int count, u8 *buf)
-{
-	int ret;
-
-	ret = regmap_bulk_read(map, reg, buf, count);
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(max77693_bulk_read);
-
-int max77693_write_reg(struct regmap *map, u8 reg, u8 value)
-{
-	int ret;
-
-	ret = regmap_write(map, reg, value);
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(max77693_write_reg);
-
-int max77693_bulk_write(struct regmap *map, u8 reg, int count, u8 *buf)
-{
-	int ret;
+static const struct regmap_config max77693_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = MAX77693_PMIC_REG_END,
+};
 
-	ret = regmap_bulk_write(map, reg, buf, count);
+static const struct regmap_irq max77693_led_irqs[] = {
+	{ .mask = LED_IRQ_FLED2_OPEN,  },
+	{ .mask = LED_IRQ_FLED2_SHORT, },
+	{ .mask = LED_IRQ_FLED1_OPEN,  },
+	{ .mask = LED_IRQ_FLED1_SHORT, },
+	{ .mask = LED_IRQ_MAX_FLASH,   },
+};
 
-	return ret;
-}
-EXPORT_SYMBOL_GPL(max77693_bulk_write);
+static const struct regmap_irq_chip max77693_led_irq_chip = {
+	.name			= "max77693-led",
+	.status_base		= MAX77693_LED_REG_FLASH_INT,
+	.mask_base		= MAX77693_LED_REG_FLASH_INT_MASK,
+	.mask_invert		= false,
+	.num_regs		= 1,
+	.irqs			= max77693_led_irqs,
+	.num_irqs		= ARRAY_SIZE(max77693_led_irqs),
+};
 
-int max77693_update_reg(struct regmap *map, u8 reg, u8 val, u8 mask)
-{
-	int ret;
+static const struct regmap_irq max77693_topsys_irqs[] = {
+	{ .mask = TOPSYS_IRQ_T120C_INT,  },
+	{ .mask = TOPSYS_IRQ_T140C_INT,  },
+	{ .mask = TOPSYS_IRQ_LOWSYS_INT, },
+};
 
-	ret = regmap_update_bits(map, reg, mask, val);
+static const struct regmap_irq_chip max77693_topsys_irq_chip = {
+	.name			= "max77693-topsys",
+	.status_base		= MAX77693_PMIC_REG_TOPSYS_INT,
+	.mask_base		= MAX77693_PMIC_REG_TOPSYS_INT_MASK,
+	.mask_invert		= false,
+	.num_regs		= 1,
+	.irqs			= max77693_topsys_irqs,
+	.num_irqs		= ARRAY_SIZE(max77693_topsys_irqs),
+};
 
-	return ret;
-}
-EXPORT_SYMBOL_GPL(max77693_update_reg);
+static const struct regmap_irq max77693_charger_irqs[] = {
+	{ .mask = CHG_IRQ_BYP_I,   },
+	{ .mask = CHG_IRQ_THM_I,   },
+	{ .mask = CHG_IRQ_BAT_I,   },
+	{ .mask = CHG_IRQ_CHG_I,   },
+	{ .mask = CHG_IRQ_CHGIN_I, },
+};
 
-static const struct regmap_config max77693_regmap_config = {
-	.reg_bits = 8,
-	.val_bits = 8,
-	.max_register = MAX77693_PMIC_REG_END,
+static const struct regmap_irq_chip max77693_charger_irq_chip = {
+	.name			= "max77693-charger",
+	.status_base		= MAX77693_CHG_REG_CHG_INT,
+	.mask_base		= MAX77693_CHG_REG_CHG_INT_MASK,
+	.mask_invert		= false,
+	.num_regs		= 1,
+	.irqs			= max77693_charger_irqs,
+	.num_irqs		= ARRAY_SIZE(max77693_charger_irqs),
 };
 
 static const struct regmap_config max77693_regmap_muic_config = {
@@ -113,11 +113,42 @@ static const struct regmap_config max77693_regmap_muic_config = {
 	.max_register = MAX77693_MUIC_REG_END,
 };
 
+static const struct regmap_irq max77693_muic_irqs[] = {
+	{ .reg_offset = 0, .mask = MUIC_IRQ_INT1_ADC,		},
+	{ .reg_offset = 0, .mask = MUIC_IRQ_INT1_ADC_LOW,	},
+	{ .reg_offset = 0, .mask = MUIC_IRQ_INT1_ADC_ERR,	},
+	{ .reg_offset = 0, .mask = MUIC_IRQ_INT1_ADC1K,		},
+
+	{ .reg_offset = 1, .mask = MUIC_IRQ_INT2_CHGTYP,	},
+	{ .reg_offset = 1, .mask = MUIC_IRQ_INT2_CHGDETREUN,	},
+	{ .reg_offset = 1, .mask = MUIC_IRQ_INT2_DCDTMR,	},
+	{ .reg_offset = 1, .mask = MUIC_IRQ_INT2_DXOVP,		},
+	{ .reg_offset = 1, .mask = MUIC_IRQ_INT2_VBVOLT,	},
+	{ .reg_offset = 1, .mask = MUIC_IRQ_INT2_VIDRM,		},
+
+	{ .reg_offset = 2, .mask = MUIC_IRQ_INT3_EOC,		},
+	{ .reg_offset = 2, .mask = MUIC_IRQ_INT3_CGMBC,		},
+	{ .reg_offset = 2, .mask = MUIC_IRQ_INT3_OVP,		},
+	{ .reg_offset = 2, .mask = MUIC_IRQ_INT3_MBCCHG_ERR,	},
+	{ .reg_offset = 2, .mask = MUIC_IRQ_INT3_CHG_ENABLED,	},
+	{ .reg_offset = 2, .mask = MUIC_IRQ_INT3_BAT_DET,	},
+};
+
+static const struct regmap_irq_chip max77693_muic_irq_chip = {
+	.name			= "max77693-muic",
+	.status_base		= MAX77693_MUIC_REG_INT1,
+	.mask_base		= MAX77693_MUIC_REG_INTMASK1,
+	.mask_invert		= true,
+	.num_regs		= 3,
+	.irqs			= max77693_muic_irqs,
+	.num_irqs		= ARRAY_SIZE(max77693_muic_irqs),
+};
+
 static int max77693_i2c_probe(struct i2c_client *i2c,
 			      const struct i2c_device_id *id)
 {
 	struct max77693_dev *max77693;
-	u8 reg_data;
+	unsigned int reg_data;
 	int ret = 0;
 
 	max77693 = devm_kzalloc(&i2c->dev,
@@ -139,7 +170,7 @@ static int max77693_i2c_probe(struct i2c_client *i2c,
 		return ret;
 	}
 
-	ret = max77693_read_reg(max77693->regmap, MAX77693_PMIC_REG_PMIC_ID2,
+	ret = regmap_read(max77693->regmap, MAX77693_PMIC_REG_PMIC_ID2,
 				&reg_data);
 	if (ret < 0) {
 		dev_err(max77693->dev, "device not found on this channel\n");
@@ -176,9 +207,45 @@ static int max77693_i2c_probe(struct i2c_client *i2c,
 		goto err_regmap_muic;
 	}
 
-	ret = max77693_irq_init(max77693);
-	if (ret < 0)
-		goto err_irq;
+	ret = regmap_add_irq_chip(max77693->regmap, max77693->irq,
+				IRQF_ONESHOT | IRQF_SHARED |
+				IRQF_TRIGGER_FALLING, 0,
+				&max77693_led_irq_chip,
+				&max77693->irq_data_led);
+	if (ret) {
+		dev_err(max77693->dev, "failed to add irq chip: %d\n", ret);
+		goto err_regmap_muic;
+	}
+
+	ret = regmap_add_irq_chip(max77693->regmap, max77693->irq,
+				IRQF_ONESHOT | IRQF_SHARED |
+				IRQF_TRIGGER_FALLING, 0,
+				&max77693_topsys_irq_chip,
+				&max77693->irq_data_topsys);
+	if (ret) {
+		dev_err(max77693->dev, "failed to add irq chip: %d\n", ret);
+		goto err_irq_topsys;
+	}
+
+	ret = regmap_add_irq_chip(max77693->regmap, max77693->irq,
+				IRQF_ONESHOT | IRQF_SHARED |
+				IRQF_TRIGGER_FALLING, 0,
+				&max77693_charger_irq_chip,
+				&max77693->irq_data_charger);
+	if (ret) {
+		dev_err(max77693->dev, "failed to add irq chip: %d\n", ret);
+		goto err_irq_charger;
+	}
+
+	ret = regmap_add_irq_chip(max77693->regmap, max77693->irq,
+				IRQF_ONESHOT | IRQF_SHARED |
+				IRQF_TRIGGER_FALLING, 0,
+				&max77693_muic_irq_chip,
+				&max77693->irq_data_muic);
+	if (ret) {
+		dev_err(max77693->dev, "failed to add irq chip: %d\n", ret);
+		goto err_irq_muic;
+	}
 
 	pm_runtime_set_active(max77693->dev);
 
@@ -190,8 +257,14 @@ static int max77693_i2c_probe(struct i2c_client *i2c,
 	return ret;
 
 err_mfd:
-	max77693_irq_exit(max77693);
-err_irq:
+	mfd_remove_devices(max77693->dev);
+	regmap_del_irq_chip(max77693->irq, max77693->irq_data_muic);
+err_irq_muic:
+	regmap_del_irq_chip(max77693->irq, max77693->irq_data_charger);
+err_irq_charger:
+	regmap_del_irq_chip(max77693->irq, max77693->irq_data_topsys);
+err_irq_topsys:
+	regmap_del_irq_chip(max77693->irq, max77693->irq_data_led);
 err_regmap_muic:
 	i2c_unregister_device(max77693->haptic);
 err_i2c_haptic:
@@ -204,7 +277,12 @@ static int max77693_i2c_remove(struct i2c_client *i2c)
 	struct max77693_dev *max77693 = i2c_get_clientdata(i2c);
 
 	mfd_remove_devices(max77693->dev);
-	max77693_irq_exit(max77693);
+
+	regmap_del_irq_chip(max77693->irq, max77693->irq_data_muic);
+	regmap_del_irq_chip(max77693->irq, max77693->irq_data_charger);
+	regmap_del_irq_chip(max77693->irq, max77693->irq_data_topsys);
+	regmap_del_irq_chip(max77693->irq, max77693->irq_data_led);
+
 	i2c_unregister_device(max77693->muic);
 	i2c_unregister_device(max77693->haptic);
 
@@ -222,8 +300,11 @@ static int max77693_suspend(struct device *dev)
 	struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
 	struct max77693_dev *max77693 = i2c_get_clientdata(i2c);
 
-	if (device_may_wakeup(dev))
-		irq_set_irq_wake(max77693->irq, 1);
+	if (device_may_wakeup(dev)) {
+		enable_irq_wake(max77693->irq);
+		disable_irq(max77693->irq);
+	}
+
 	return 0;
 }
 
@@ -232,9 +313,12 @@ static int max77693_resume(struct device *dev)
 	struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
 	struct max77693_dev *max77693 = i2c_get_clientdata(i2c);
 
-	if (device_may_wakeup(dev))
-		irq_set_irq_wake(max77693->irq, 0);
-	return max77693_irq_resume(max77693);
+	if (device_may_wakeup(dev)) {
+		disable_irq_wake(max77693->irq);
+		enable_irq(max77693->irq);
+	}
+
+	return 0;
 }
 
 static const struct dev_pm_ops max77693_pm = {
diff --git a/drivers/regulator/max77693.c b/drivers/regulator/max77693.c
index 653a58b49cdf..c67ff05fc1dd 100644
--- a/drivers/regulator/max77693.c
+++ b/drivers/regulator/max77693.c
@@ -31,6 +31,7 @@
 #include <linux/mfd/max77693.h>
 #include <linux/mfd/max77693-private.h>
 #include <linux/regulator/of_regulator.h>
+#include <linux/regmap.h>
 
 #define CHGIN_ILIM_STEP_20mA			20000
 
@@ -39,9 +40,9 @@
 static int max77693_chg_is_enabled(struct regulator_dev *rdev)
 {
 	int ret;
-	u8 val;
+	unsigned int val;
 
-	ret = max77693_read_reg(rdev->regmap, rdev->desc->enable_reg, &val);
+	ret = regmap_read(rdev->regmap, rdev->desc->enable_reg, &val);
 	if (ret)
 		return ret;
 
@@ -57,12 +58,11 @@ static int max77693_chg_get_current_limit(struct regulator_dev *rdev)
 {
 	unsigned int chg_min_uA = rdev->constraints->min_uA;
 	unsigned int chg_max_uA = rdev->constraints->max_uA;
-	u8 reg, sel;
+	unsigned int reg, sel;
 	unsigned int val;
 	int ret;
 
-	ret = max77693_read_reg(rdev->regmap,
-				MAX77693_CHG_REG_CHG_CNFG_09, &reg);
+	ret = regmap_read(rdev->regmap, MAX77693_CHG_REG_CHG_CNFG_09, &reg);
 	if (ret < 0)
 		return ret;
 
@@ -96,7 +96,7 @@ static int max77693_chg_set_current_limit(struct regulator_dev *rdev,
 	/* the first four codes for charger current are all 60mA */
 	sel += 3;
 
-	return max77693_write_reg(rdev->regmap,
+	return regmap_write(rdev->regmap,
 				MAX77693_CHG_REG_CHG_CNFG_09, sel);
 }
 /* end of CHARGER regulator ops */