Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: (44 commits) hwmon: (lineage-pem): Fix in1 voltage alarm sysfs attributes hwmon/f71882fg: Add support for f71808e hwmon/f71882fg: Add support for f71869f and f71869e hwmon/f71882fg: Add support for f71889ed hwmon/f71882fg: Break out test for auto pwm's controlled by digital readings hwmon/f71882fg: Separate temp beep sysfs attr from the other temp sysfs attr hwmon/f71882fg: Remove bogus temp2_type for certain models hwmon/f71882fg: Make number of temps configurable hwmon/f71882fg: Make creation of in sysfs attributes more generic hwmon/f71882fg: Only allow negative auto point temps if fan_neg_temp is enabled hwmon/f71882fg: Fix temp1 sensor type reporting hwmon: (w83627ehf) Display correct temperature sensor labels for systems with NCT6775F hwmon: (w83627ehf) Add fan debounce support for NCT6775F and NCT6776F hwmon: (w83627ehf) Update Kconfig for W83677HG-B, NCT6775F and NCT6776F hwmon: (w83627ehf) Store rpm instead of raw fan speed data hwmon: (w83627ehf) Use 16 bit fan count registers if supported hwmon: (w83627ehf) Add support for Nuvoton NCT6775F and NCT6776F hwmon: (w83627ehf) Permit enabling SmartFan IV mode if configured at startup hwmon: (w83627ehf) Convert register arrays to 16 bit, and convert access to pointers hwmon: (w83627ehf) Remove references to datasheets which no longer exist ...
author: Linus Torvalds <torvalds@linux-foundation.org> 2011-03-17 16:59:38 -0700
committer: Linus Torvalds <torvalds@linux-foundation.org> 2011-03-17 16:59:38 -0700
commit: 19520fc1ee36164808e6f084bd95e8178e2db231 (patch)
tree: abf66f8c2a2b35e574e9452673263614fc50c63f /drivers
parent: c8def554d031664e984323f6a5d667f070717776 (diff)
parent: d668a8b022a201e65ec5e301a9e6dff78987550c (diff)
15 files changed, 5683 insertions, 564 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 297bc9a7d6e6..1bfb4439e4e1 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -467,6 +467,17 @@ config SENSORS_JC42
 	  This driver can also be built as a module.  If so, the module
 	  will be called jc42.
 
+config SENSORS_LINEAGE
+	tristate "Lineage Compact Power Line Power Entry Module"
+	depends on I2C && EXPERIMENTAL
+	help
+	  If you say yes here you get support for the Lineage Compact Power Line
+	  series of DC/DC and AC/DC converters such as CP1800, CP2000AC,
+	  CP2000DC, CP2725, and others.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called lineage-pem.
+
 config SENSORS_LM63
 	tristate "National Semiconductor LM63 and LM64"
 	depends on I2C
@@ -625,6 +636,17 @@ config SENSORS_LM93
 	  This driver can also be built as a module.  If so, the module
 	  will be called lm93.
 
+config SENSORS_LTC4151
+	tristate "Linear Technology LTC4151"
+	depends on I2C
+	default n
+	help
+	  If you say yes here you get support for Linear Technology LTC4151
+	  High Voltage I2C Current and Voltage Monitor interface.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called ltc4151.
+
 config SENSORS_LTC4215
 	tristate "Linear Technology LTC4215"
 	depends on I2C && EXPERIMENTAL
@@ -685,6 +707,16 @@ config SENSORS_MAX1619
 	  This driver can also be built as a module.  If so, the module
 	  will be called max1619.
 
+config SENSORS_MAX6639
+	tristate "Maxim MAX6639 sensor chip"
+	depends on I2C && EXPERIMENTAL
+	help
+	  If you say yes here you get support for the MAX6639
+	  sensor chips.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called max6639.
+
 config SENSORS_MAX6650
 	tristate "Maxim MAX6650 sensor chip"
 	depends on I2C && EXPERIMENTAL
@@ -735,6 +767,61 @@ config SENSORS_PCF8591
 	  These devices are hard to detect and rarely found on mainstream
 	  hardware.  If unsure, say N.
 
+config PMBUS
+	tristate "PMBus support"
+	depends on I2C && EXPERIMENTAL
+	default n
+	help
+	  Say yes here if you want to enable PMBus support.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called pmbus_core.
+
+if PMBUS
+
+config SENSORS_PMBUS
+	tristate "Generic PMBus devices"
+	default n
+	help
+	  If you say yes here you get hardware monitoring support for generic
+	  PMBus devices, including but not limited to BMR450, BMR451, BMR453,
+	  BMR454, and LTC2978.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called pmbus.
+
+config SENSORS_MAX16064
+	tristate "Maxim MAX16064"
+	default n
+	help
+	  If you say yes here you get hardware monitoring support for Maxim
+	  MAX16064.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called max16064.
+
+config SENSORS_MAX34440
+	tristate "Maxim MAX34440/MAX34441"
+	default n
+	help
+	  If you say yes here you get hardware monitoring support for Maxim
+	  MAX34440 and MAX34441.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called max34440.
+
+config SENSORS_MAX8688
+	tristate "Maxim MAX8688"
+	default n
+	help
+	  If you say yes here you get hardware monitoring support for Maxim
+	  MAX8688.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called max8688.
+
+endif # PMBUS
+
 config SENSORS_SHT15
 	tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
 	depends on GENERIC_GPIO
@@ -1083,7 +1170,7 @@ config SENSORS_W83627HF
 	  will be called w83627hf.
 
 config SENSORS_W83627EHF
-	tristate "Winbond W83627EHF/EHG/DHG, W83667HG"
+	tristate "Winbond W83627EHF/EHG/DHG, W83667HG, NCT6775F, NCT6776F"
 	select HWMON_VID
 	help
 	  If you say yes here you get support for the hardware
@@ -1094,7 +1181,8 @@ config SENSORS_W83627EHF
 	  chip suited for specific Intel processors that use PECI such as
 	  the Core 2 Duo.
 
-	  This driver also supports the W83667HG chip.
+	  This driver also supports Nuvoton W83667HG, W83667HG-B, NCT6775F
+	  (also known as W83667HG-I), and NCT6776F.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called w83627ehf.
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index dde02d99c238..bd0410e4b44f 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -62,6 +62,7 @@ obj-$(CONFIG_SENSORS_JC42)	+= jc42.o
 obj-$(CONFIG_SENSORS_JZ4740)	+= jz4740-hwmon.o
 obj-$(CONFIG_SENSORS_K8TEMP)	+= k8temp.o
 obj-$(CONFIG_SENSORS_K10TEMP)	+= k10temp.o
+obj-$(CONFIG_SENSORS_LINEAGE)	+= lineage-pem.o
 obj-$(CONFIG_SENSORS_LIS3LV02D) += lis3lv02d.o hp_accel.o
 obj-$(CONFIG_SENSORS_LIS3_SPI)	+= lis3lv02d.o lis3lv02d_spi.o
 obj-$(CONFIG_SENSORS_LIS3_I2C)	+= lis3lv02d.o lis3lv02d_i2c.o
@@ -79,11 +80,13 @@ obj-$(CONFIG_SENSORS_LM90)	+= lm90.o
 obj-$(CONFIG_SENSORS_LM92)	+= lm92.o
 obj-$(CONFIG_SENSORS_LM93)	+= lm93.o
 obj-$(CONFIG_SENSORS_LM95241)	+= lm95241.o
+obj-$(CONFIG_SENSORS_LTC4151)	+= ltc4151.o
 obj-$(CONFIG_SENSORS_LTC4215)	+= ltc4215.o
 obj-$(CONFIG_SENSORS_LTC4245)	+= ltc4245.o
 obj-$(CONFIG_SENSORS_LTC4261)	+= ltc4261.o
 obj-$(CONFIG_SENSORS_MAX1111)	+= max1111.o
 obj-$(CONFIG_SENSORS_MAX1619)	+= max1619.o
+obj-$(CONFIG_SENSORS_MAX6639)	+= max6639.o
 obj-$(CONFIG_SENSORS_MAX6650)	+= max6650.o
 obj-$(CONFIG_SENSORS_MC13783_ADC)+= mc13783-adc.o
 obj-$(CONFIG_SENSORS_PC87360)	+= pc87360.o
@@ -112,6 +115,13 @@ obj-$(CONFIG_SENSORS_W83L786NG)	+= w83l786ng.o
 obj-$(CONFIG_SENSORS_WM831X)	+= wm831x-hwmon.o
 obj-$(CONFIG_SENSORS_WM8350)	+= wm8350-hwmon.o
 
+# PMBus drivers
+obj-$(CONFIG_PMBUS)		+= pmbus_core.o
+obj-$(CONFIG_SENSORS_PMBUS)	+= pmbus.o
+obj-$(CONFIG_SENSORS_MAX16064)	+= max16064.o
+obj-$(CONFIG_SENSORS_MAX34440)	+= max34440.o
+obj-$(CONFIG_SENSORS_MAX8688)	+= max8688.o
+
 ifeq ($(CONFIG_HWMON_DEBUG_CHIP),y)
 EXTRA_CFLAGS += -DDEBUG
 endif
diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c
index 6e06019015a5..a4d430ee7e20 100644
--- a/drivers/hwmon/f71882fg.c
+++ b/drivers/hwmon/f71882fg.c
@@ -1,6 +1,6 @@
 /***************************************************************************
  *   Copyright (C) 2006 by Hans Edgington <hans@edgington.nl>              *
- *   Copyright (C) 2007-2009 Hans de Goede <hdegoede@redhat.com>           *
+ *   Copyright (C) 2007-2011 Hans de Goede <hdegoede@redhat.com>           *
  *                                                                         *
  *   This program is free software; you can redistribute it and/or modify  *
  *   it under the terms of the GNU General Public License as published by  *
@@ -47,22 +47,23 @@
 #define SIO_REG_ADDR		0x60	/* Logical device address (2 bytes) */
 
 #define SIO_FINTEK_ID		0x1934	/* Manufacturers ID */
+#define SIO_F71808E_ID		0x0901	/* Chipset ID */
 #define SIO_F71858_ID		0x0507  /* Chipset ID */
 #define SIO_F71862_ID		0x0601	/* Chipset ID */
+#define SIO_F71869_ID		0x0814	/* Chipset ID */
 #define SIO_F71882_ID		0x0541	/* Chipset ID */
 #define SIO_F71889_ID		0x0723	/* Chipset ID */
+#define SIO_F71889E_ID		0x0909	/* Chipset ID */
 #define SIO_F8000_ID		0x0581	/* Chipset ID */
 
 #define REGION_LENGTH		8
 #define ADDR_REG_OFFSET		5
 #define DATA_REG_OFFSET		6
 
-#define F71882FG_REG_PECI		0x0A
-
-#define F71882FG_REG_IN_STATUS		0x12 /* f71882fg only */
-#define F71882FG_REG_IN_BEEP		0x13 /* f71882fg only */
+#define F71882FG_REG_IN_STATUS		0x12 /* f7188x only */
+#define F71882FG_REG_IN_BEEP		0x13 /* f7188x only */
 #define F71882FG_REG_IN(nr)		(0x20  + (nr))
-#define F71882FG_REG_IN1_HIGH		0x32 /* f71882fg only */
+#define F71882FG_REG_IN1_HIGH		0x32 /* f7188x only */
 
 #define F71882FG_REG_FAN(nr)		(0xA0 + (16 * (nr)))
 #define F71882FG_REG_FAN_TARGET(nr)	(0xA2 + (16 * (nr)))
@@ -86,28 +87,71 @@
 
 #define F71882FG_REG_FAN_HYST(nr)	(0x98 + (nr))
 
+#define F71882FG_REG_FAN_FAULT_T	0x9F
+#define F71882FG_FAN_NEG_TEMP_EN	0x20
+#define F71882FG_FAN_PROG_SEL		0x80
+
 #define F71882FG_REG_POINT_PWM(pwm, point)	(0xAA + (point) + (16 * (pwm)))
 #define F71882FG_REG_POINT_TEMP(pwm, point)	(0xA6 + (point) + (16 * (pwm)))
 #define F71882FG_REG_POINT_MAPPING(nr)		(0xAF + 16 * (nr))
 
 #define	F71882FG_REG_START		0x01
 
+#define F71882FG_MAX_INS		9
+
 #define FAN_MIN_DETECT			366 /* Lowest detectable fanspeed */
 
 static unsigned short force_id;
 module_param(force_id, ushort, 0);
 MODULE_PARM_DESC(force_id, "Override the detected device ID");
 
-enum chips { f71858fg, f71862fg, f71882fg, f71889fg, f8000 };
+enum chips { f71808e, f71858fg, f71862fg, f71869, f71882fg, f71889fg,
+	     f71889ed, f8000 };
 
 static const char *f71882fg_names[] = {
+	"f71808e",
 	"f71858fg",
 	"f71862fg",
+	"f71869", /* Both f71869f and f71869e, reg. compatible and same id */
 	"f71882fg",
 	"f71889fg",
+	"f71889ed",
 	"f8000",
 };
 
+static const char f71882fg_has_in[8][F71882FG_MAX_INS] = {
+	{ 1, 1, 1, 1, 1, 1, 0, 1, 1 }, /* f71808e */
+	{ 1, 1, 1, 0, 0, 0, 0, 0, 0 }, /* f71858fg */
+	{ 1, 1, 1, 1, 1, 1, 1, 1, 1 }, /* f71862fg */
+	{ 1, 1, 1, 1, 1, 1, 1, 1, 1 }, /* f71869 */
+	{ 1, 1, 1, 1, 1, 1, 1, 1, 1 }, /* f71882fg */
+	{ 1, 1, 1, 1, 1, 1, 1, 1, 1 }, /* f71889fg */
+	{ 1, 1, 1, 1, 1, 1, 1, 1, 1 }, /* f71889ed */
+	{ 1, 1, 1, 0, 0, 0, 0, 0, 0 }, /* f8000 */
+};
+
+static const char f71882fg_has_in1_alarm[8] = {
+	0, /* f71808e */
+	0, /* f71858fg */
+	0, /* f71862fg */
+	0, /* f71869 */
+	1, /* f71882fg */
+	1, /* f71889fg */
+	1, /* f71889ed */
+	0, /* f8000 */
+};
+
+static const char f71882fg_has_beep[8] = {
+	0, /* f71808e */
+	0, /* f71858fg */
+	1, /* f71862fg */
+	1, /* f71869 */
+	1, /* f71882fg */
+	1, /* f71889fg */
+	1, /* f71889ed */
+	0, /* f8000 */
+};
+
 static struct platform_device *f71882fg_pdev;
 
 /* Super-I/O Function prototypes */
@@ -129,11 +173,12 @@ struct f71882fg_data {
 	struct mutex update_lock;
 	int temp_start;			/* temp numbering start (0 or 1) */
 	char valid;			/* !=0 if following fields are valid */
+	char auto_point_temp_signed;
 	unsigned long last_updated;	/* In jiffies */
 	unsigned long last_limits;	/* In jiffies */
 
 	/* Register Values */
-	u8	in[9];
+	u8	in[F71882FG_MAX_INS];
 	u8	in1_max;
 	u8	in_status;
 	u8	in_beep;
@@ -142,7 +187,7 @@ struct f71882fg_data {
 	u16	fan_full_speed[4];
 	u8	fan_status;
 	u8	fan_beep;
-	/* Note: all models have only 3 temperature channels, but on some
+	/* Note: all models have max 3 temperature channels, but on some
 	   they are addressed as 0-2 and on others as 1-3, so for coding
 	   convenience we reserve space for 4 channels */
 	u16	temp[4];
@@ -262,13 +307,9 @@ static struct platform_driver f71882fg_driver = {
 
 static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
 
-/* Temp and in attr for the f71858fg, the f71858fg is special as it
-   has its temperature indexes start at 0 (the others start at 1) and
-   it only has 3 voltage inputs */
-static struct sensor_device_attribute_2 f71858fg_in_temp_attr[] = {
-	SENSOR_ATTR_2(in0_input, S_IRUGO, show_in, NULL, 0, 0),
-	SENSOR_ATTR_2(in1_input, S_IRUGO, show_in, NULL, 0, 1),
-	SENSOR_ATTR_2(in2_input, S_IRUGO, show_in, NULL, 0, 2),
+/* Temp attr for the f71858fg, the f71858fg is special as it has its
+   temperature indexes start at 0 (the others start at 1) */
+static struct sensor_device_attribute_2 f71858fg_temp_attr[] = {
 	SENSOR_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0, 0),
 	SENSOR_ATTR_2(temp1_max, S_IRUGO|S_IWUSR, show_temp_max,
 		store_temp_max, 0, 0),
@@ -292,7 +333,6 @@ static struct sensor_device_attribute_2 f71858fg_in_temp_attr[] = {
 	SENSOR_ATTR_2(temp2_crit_hyst, S_IRUGO, show_temp_crit_hyst, NULL,
 		0, 1),
 	SENSOR_ATTR_2(temp2_crit_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 5),
-	SENSOR_ATTR_2(temp2_type, S_IRUGO, show_temp_type, NULL, 0, 1),
 	SENSOR_ATTR_2(temp2_fault, S_IRUGO, show_temp_fault, NULL, 0, 1),
 	SENSOR_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, 0, 2),
 	SENSOR_ATTR_2(temp3_max, S_IRUGO|S_IWUSR, show_temp_max,
@@ -308,17 +348,8 @@ static struct sensor_device_attribute_2 f71858fg_in_temp_attr[] = {
 	SENSOR_ATTR_2(temp3_fault, S_IRUGO, show_temp_fault, NULL, 0, 2),
 };
 
-/* Temp and in attr common to the f71862fg, f71882fg and f71889fg */
-static struct sensor_device_attribute_2 fxxxx_in_temp_attr[] = {
-	SENSOR_ATTR_2(in0_input, S_IRUGO, show_in, NULL, 0, 0),
-	SENSOR_ATTR_2(in1_input, S_IRUGO, show_in, NULL, 0, 1),
-	SENSOR_ATTR_2(in2_input, S_IRUGO, show_in, NULL, 0, 2),
-	SENSOR_ATTR_2(in3_input, S_IRUGO, show_in, NULL, 0, 3),
-	SENSOR_ATTR_2(in4_input, S_IRUGO, show_in, NULL, 0, 4),
-	SENSOR_ATTR_2(in5_input, S_IRUGO, show_in, NULL, 0, 5),
-	SENSOR_ATTR_2(in6_input, S_IRUGO, show_in, NULL, 0, 6),
-	SENSOR_ATTR_2(in7_input, S_IRUGO, show_in, NULL, 0, 7),
-	SENSOR_ATTR_2(in8_input, S_IRUGO, show_in, NULL, 0, 8),
+/* Temp attr for the standard models */
+static struct sensor_device_attribute_2 fxxxx_temp_attr[3][9] = { {
 	SENSOR_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0, 1),
 	SENSOR_ATTR_2(temp1_max, S_IRUGO|S_IWUSR, show_temp_max,
 		store_temp_max, 0, 1),
@@ -328,17 +359,14 @@ static struct sensor_device_attribute_2 fxxxx_in_temp_attr[] = {
 	   the max and crit alarms separately and lm_sensors v2 depends on the
 	   presence of temp#_alarm files. The same goes for temp2/3 _alarm. */
 	SENSOR_ATTR_2(temp1_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 1),
-	SENSOR_ATTR_2(temp1_max_beep, S_IRUGO|S_IWUSR, show_temp_beep,
-		store_temp_beep, 0, 1),
 	SENSOR_ATTR_2(temp1_crit, S_IRUGO|S_IWUSR, show_temp_crit,
 		store_temp_crit, 0, 1),
 	SENSOR_ATTR_2(temp1_crit_hyst, S_IRUGO, show_temp_crit_hyst, NULL,
 		0, 1),
 	SENSOR_ATTR_2(temp1_crit_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 5),
-	SENSOR_ATTR_2(temp1_crit_beep, S_IRUGO|S_IWUSR, show_temp_beep,
-		store_temp_beep, 0, 5),
 	SENSOR_ATTR_2(temp1_type, S_IRUGO, show_temp_type, NULL, 0, 1),
 	SENSOR_ATTR_2(temp1_fault, S_IRUGO, show_temp_fault, NULL, 0, 1),
+}, {
 	SENSOR_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, 0, 2),
 	SENSOR_ATTR_2(temp2_max, S_IRUGO|S_IWUSR, show_temp_max,
 		store_temp_max, 0, 2),
@@ -346,17 +374,14 @@ static struct sensor_device_attribute_2 fxxxx_in_temp_attr[] = {
 		store_temp_max_hyst, 0, 2),
 	/* Should be temp2_max_alarm, see temp1_alarm note */
 	SENSOR_ATTR_2(temp2_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 2),
-	SENSOR_ATTR_2(temp2_max_beep, S_IRUGO|S_IWUSR, show_temp_beep,
-		store_temp_beep, 0, 2),
 	SENSOR_ATTR_2(temp2_crit, S_IRUGO|S_IWUSR, show_temp_crit,
 		store_temp_crit, 0, 2),
 	SENSOR_ATTR_2(temp2_crit_hyst, S_IRUGO, show_temp_crit_hyst, NULL,
 		0, 2),
 	SENSOR_ATTR_2(temp2_crit_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 6),
-	SENSOR_ATTR_2(temp2_crit_beep, S_IRUGO|S_IWUSR, show_temp_beep,
-		store_temp_beep, 0, 6),
 	SENSOR_ATTR_2(temp2_type, S_IRUGO, show_temp_type, NULL, 0, 2),
 	SENSOR_ATTR_2(temp2_fault, S_IRUGO, show_temp_fault, NULL, 0, 2),
+}, {
 	SENSOR_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, 0, 3),
 	SENSOR_ATTR_2(temp3_max, S_IRUGO|S_IWUSR, show_temp_max,
 		store_temp_max, 0, 3),
@@ -364,37 +389,39 @@ static struct sensor_device_attribute_2 fxxxx_in_temp_attr[] = {
 		store_temp_max_hyst, 0, 3),
 	/* Should be temp3_max_alarm, see temp1_alarm note */
 	SENSOR_ATTR_2(temp3_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 3),
-	SENSOR_ATTR_2(temp3_max_beep, S_IRUGO|S_IWUSR, show_temp_beep,
-		store_temp_beep, 0, 3),
 	SENSOR_ATTR_2(temp3_crit, S_IRUGO|S_IWUSR, show_temp_crit,
 		store_temp_crit, 0, 3),
 	SENSOR_ATTR_2(temp3_crit_hyst, S_IRUGO, show_temp_crit_hyst, NULL,
 		0, 3),
 	SENSOR_ATTR_2(temp3_crit_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 7),
-	SENSOR_ATTR_2(temp3_crit_beep, S_IRUGO|S_IWUSR, show_temp_beep,
-		store_temp_beep, 0, 7),
 	SENSOR_ATTR_2(temp3_type, S_IRUGO, show_temp_type, NULL, 0, 3),
 	SENSOR_ATTR_2(temp3_fault, S_IRUGO, show_temp_fault, NULL, 0, 3),
-};
+} };
 
-/* For models with in1 alarm capability */
-static struct sensor_device_attribute_2 fxxxx_in1_alarm_attr[] = {
-	SENSOR_ATTR_2(in1_max, S_IRUGO|S_IWUSR, show_in_max, store_in_max,
-		0, 1),
-	SENSOR_ATTR_2(in1_beep, S_IRUGO|S_IWUSR, show_in_beep, store_in_beep,
-		0, 1),
-	SENSOR_ATTR_2(in1_alarm, S_IRUGO, show_in_alarm, NULL, 0, 1),
-};
+/* Temp attr for models which can beep on temp alarm */
+static struct sensor_device_attribute_2 fxxxx_temp_beep_attr[3][2] = { {
+	SENSOR_ATTR_2(temp1_max_beep, S_IRUGO|S_IWUSR, show_temp_beep,
+		store_temp_beep, 0, 1),
+	SENSOR_ATTR_2(temp1_crit_beep, S_IRUGO|S_IWUSR, show_temp_beep,
+		store_temp_beep, 0, 5),
+}, {
+	SENSOR_ATTR_2(temp2_max_beep, S_IRUGO|S_IWUSR, show_temp_beep,
+		store_temp_beep, 0, 2),
+	SENSOR_ATTR_2(temp2_crit_beep, S_IRUGO|S_IWUSR, show_temp_beep,
+		store_temp_beep, 0, 6),
+}, {
+	SENSOR_ATTR_2(temp3_max_beep, S_IRUGO|S_IWUSR, show_temp_beep,
+		store_temp_beep, 0, 3),
+	SENSOR_ATTR_2(temp3_crit_beep, S_IRUGO|S_IWUSR, show_temp_beep,
+		store_temp_beep, 0, 7),
+} };
 
-/* Temp and in attr for the f8000
+/* Temp attr for the f8000
    Note on the f8000 temp_ovt (crit) is used as max, and temp_high (max)
    is used as hysteresis value to clear alarms
    Also like the f71858fg its temperature indexes start at 0
  */
-static struct sensor_device_attribute_2 f8000_in_temp_attr[] = {
-	SENSOR_ATTR_2(in0_input, S_IRUGO, show_in, NULL, 0, 0),
-	SENSOR_ATTR_2(in1_input, S_IRUGO, show_in, NULL, 0, 1),
-	SENSOR_ATTR_2(in2_input, S_IRUGO, show_in, NULL, 0, 2),
+static struct sensor_device_attribute_2 f8000_temp_attr[] = {
 	SENSOR_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0, 0),
 	SENSOR_ATTR_2(temp1_max, S_IRUGO|S_IWUSR, show_temp_crit,
 		store_temp_crit, 0, 0),
@@ -408,7 +435,6 @@ static struct sensor_device_attribute_2 f8000_in_temp_attr[] = {
 	SENSOR_ATTR_2(temp2_max_hyst, S_IRUGO|S_IWUSR, show_temp_max,
 		store_temp_max, 0, 1),
 	SENSOR_ATTR_2(temp2_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 5),
-	SENSOR_ATTR_2(temp2_type, S_IRUGO, show_temp_type, NULL, 0, 1),
 	SENSOR_ATTR_2(temp2_fault, S_IRUGO, show_temp_fault, NULL, 0, 1),
 	SENSOR_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, 0, 2),
 	SENSOR_ATTR_2(temp3_max, S_IRUGO|S_IWUSR, show_temp_crit,
@@ -419,6 +445,28 @@ static struct sensor_device_attribute_2 f8000_in_temp_attr[] = {
 	SENSOR_ATTR_2(temp3_fault, S_IRUGO, show_temp_fault, NULL, 0, 2),
 };
 
+/* in attr for all models */
+static struct sensor_device_attribute_2 fxxxx_in_attr[] = {
+	SENSOR_ATTR_2(in0_input, S_IRUGO, show_in, NULL, 0, 0),
+	SENSOR_ATTR_2(in1_input, S_IRUGO, show_in, NULL, 0, 1),
+	SENSOR_ATTR_2(in2_input, S_IRUGO, show_in, NULL, 0, 2),
+	SENSOR_ATTR_2(in3_input, S_IRUGO, show_in, NULL, 0, 3),
+	SENSOR_ATTR_2(in4_input, S_IRUGO, show_in, NULL, 0, 4),
+	SENSOR_ATTR_2(in5_input, S_IRUGO, show_in, NULL, 0, 5),
+	SENSOR_ATTR_2(in6_input, S_IRUGO, show_in, NULL, 0, 6),
+	SENSOR_ATTR_2(in7_input, S_IRUGO, show_in, NULL, 0, 7),
+	SENSOR_ATTR_2(in8_input, S_IRUGO, show_in, NULL, 0, 8),
+};
+
+/* For models with in1 alarm capability */
+static struct sensor_device_attribute_2 fxxxx_in1_alarm_attr[] = {
+	SENSOR_ATTR_2(in1_max, S_IRUGO|S_IWUSR, show_in_max, store_in_max,
+		0, 1),
+	SENSOR_ATTR_2(in1_beep, S_IRUGO|S_IWUSR, show_in_beep, store_in_beep,
+		0, 1),
+	SENSOR_ATTR_2(in1_alarm, S_IRUGO, show_in_alarm, NULL, 0, 1),
+};
+
 /* Fan / PWM attr common to all models */
 static struct sensor_device_attribute_2 fxxxx_fan_attr[4][6] = { {
 	SENSOR_ATTR_2(fan1_input, S_IRUGO, show_fan, NULL, 0, 0),
@@ -479,7 +527,7 @@ static struct sensor_device_attribute_2 fxxxx_fan_beep_attr[] = {
 };
 
 /* PWM attr for the f71862fg, fewer pwms and fewer zones per pwm than the
-   f71858fg / f71882fg / f71889fg */
+   standard models */
 static struct sensor_device_attribute_2 f71862fg_auto_pwm_attr[] = {
 	SENSOR_ATTR_2(pwm1_auto_channels_temp, S_IRUGO|S_IWUSR,
 		      show_pwm_auto_point_channel,
@@ -548,7 +596,87 @@ static struct sensor_device_attribute_2 f71862fg_auto_pwm_attr[] = {
 		      show_pwm_auto_point_temp_hyst, NULL, 3, 2),
 };
 
-/* PWM attr common to the f71858fg, f71882fg and f71889fg */
+/* PWM attr for the f71808e/f71869, almost identical to the f71862fg, but the
+   pwm setting when the temperature is above the pwmX_auto_point1_temp can be
+   programmed instead of being hardcoded to 0xff */
+static struct sensor_device_attribute_2 f71869_auto_pwm_attr[] = {
+	SENSOR_ATTR_2(pwm1_auto_channels_temp, S_IRUGO|S_IWUSR,
+		      show_pwm_auto_point_channel,
+		      store_pwm_auto_point_channel, 0, 0),
+	SENSOR_ATTR_2(pwm1_auto_point1_pwm, S_IRUGO|S_IWUSR,
+		      show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
+		      0, 0),
+	SENSOR_ATTR_2(pwm1_auto_point2_pwm, S_IRUGO|S_IWUSR,
+		      show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
+		      1, 0),
+	SENSOR_ATTR_2(pwm1_auto_point3_pwm, S_IRUGO|S_IWUSR,
+		      show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
+		      4, 0),
+	SENSOR_ATTR_2(pwm1_auto_point1_temp, S_IRUGO|S_IWUSR,
+		      show_pwm_auto_point_temp, store_pwm_auto_point_temp,
+		      0, 0),
+	SENSOR_ATTR_2(pwm1_auto_point2_temp, S_IRUGO|S_IWUSR,
+		      show_pwm_auto_point_temp, store_pwm_auto_point_temp,
+		      3, 0),
+	SENSOR_ATTR_2(pwm1_auto_point1_temp_hyst, S_IRUGO|S_IWUSR,
+		      show_pwm_auto_point_temp_hyst,
+		      store_pwm_auto_point_temp_hyst,
+		      0, 0),
+	SENSOR_ATTR_2(pwm1_auto_point2_temp_hyst, S_IRUGO,
+		      show_pwm_auto_point_temp_hyst, NULL, 3, 0),
+
+	SENSOR_ATTR_2(pwm2_auto_channels_temp, S_IRUGO|S_IWUSR,
+		      show_pwm_auto_point_channel,
+		      store_pwm_auto_point_channel, 0, 1),
+	SENSOR_ATTR_2(pwm2_auto_point1_pwm, S_IRUGO|S_IWUSR,
+		      show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
+		      0, 1),
+	SENSOR_ATTR_2(pwm2_auto_point2_pwm, S_IRUGO|S_IWUSR,
+		      show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
+		      1, 1),
+	SENSOR_ATTR_2(pwm2_auto_point3_pwm, S_IRUGO|S_IWUSR,
+		      show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
+		      4, 1),
+	SENSOR_ATTR_2(pwm2_auto_point1_temp, S_IRUGO|S_IWUSR,
+		      show_pwm_auto_point_temp, store_pwm_auto_point_temp,
+		      0, 1),
+	SENSOR_ATTR_2(pwm2_auto_point2_temp, S_IRUGO|S_IWUSR,
+		      show_pwm_auto_point_temp, store_pwm_auto_point_temp,
+		      3, 1),
+	SENSOR_ATTR_2(pwm2_auto_point1_temp_hyst, S_IRUGO|S_IWUSR,
+		      show_pwm_auto_point_temp_hyst,
+		      store_pwm_auto_point_temp_hyst,
+		      0, 1),
+	SENSOR_ATTR_2(pwm2_auto_point2_temp_hyst, S_IRUGO,
+		      show_pwm_auto_point_temp_hyst, NULL, 3, 1),
+
+	SENSOR_ATTR_2(pwm3_auto_channels_temp, S_IRUGO|S_IWUSR,
+		      show_pwm_auto_point_channel,
+		      store_pwm_auto_point_channel, 0, 2),
+	SENSOR_ATTR_2(pwm3_auto_point1_pwm, S_IRUGO|S_IWUSR,
+		      show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
+		      0, 2),
+	SENSOR_ATTR_2(pwm3_auto_point2_pwm, S_IRUGO|S_IWUSR,
+		      show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
+		      1, 2),
+	SENSOR_ATTR_2(pwm3_auto_point3_pwm, S_IRUGO|S_IWUSR,
+		      show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
+		      4, 2),
+	SENSOR_ATTR_2(pwm3_auto_point1_temp, S_IRUGO|S_IWUSR,
+		      show_pwm_auto_point_temp, store_pwm_auto_point_temp,
+		      0, 2),
+	SENSOR_ATTR_2(pwm3_auto_point2_temp, S_IRUGO|S_IWUSR,
+		      show_pwm_auto_point_temp, store_pwm_auto_point_temp,
+		      3, 2),
+	SENSOR_ATTR_2(pwm3_auto_point1_temp_hyst, S_IRUGO|S_IWUSR,
+		      show_pwm_auto_point_temp_hyst,
+		      store_pwm_auto_point_temp_hyst,
+		      0, 2),
+	SENSOR_ATTR_2(pwm3_auto_point2_temp_hyst, S_IRUGO,
+		      show_pwm_auto_point_temp_hyst, NULL, 3, 2),
+};
+
+/* PWM attr for the standard models */
 static struct sensor_device_attribute_2 fxxxx_auto_pwm_attr[4][14] = { {
 	SENSOR_ATTR_2(pwm1_auto_channels_temp, S_IRUGO|S_IWUSR,
 		      show_pwm_auto_point_channel,
@@ -943,16 +1071,16 @@ static u16 f71882fg_read_temp(struct f71882fg_data *data, int nr)
 static struct f71882fg_data *f71882fg_update_device(struct device *dev)
 {
 	struct f71882fg_data *data = dev_get_drvdata(dev);
-	int nr, reg = 0, reg2;
+	int nr, reg, point;
 	int nr_fans = (data->type == f71882fg) ? 4 : 3;
-	int nr_ins = (data->type == f71858fg || data->type == f8000) ? 3 : 9;
+	int nr_temps = (data->type == f71808e) ? 2 : 3;
 
 	mutex_lock(&data->update_lock);
 
 	/* Update once every 60 seconds */
 	if (time_after(jiffies, data->last_limits + 60 * HZ) ||
 			!data->valid) {
-		if (data->type == f71882fg || data->type == f71889fg) {
+		if (f71882fg_has_in1_alarm[data->type]) {
 			data->in1_max =
 				f71882fg_read8(data, F71882FG_REG_IN1_HIGH);
 			data->in_beep =
@@ -960,7 +1088,8 @@ static struct f71882fg_data *f71882fg_update_device(struct device *dev)
 		}
 
 		/* Get High & boundary temps*/
-		for (nr = data->temp_start; nr < 3 + data->temp_start; nr++) {
+		for (nr = data->temp_start; nr < nr_temps + data->temp_start;
+									nr++) {
 			data->temp_ovt[nr] = f71882fg_read8(data,
 						F71882FG_REG_TEMP_OVT(nr));
 			data->temp_high[nr] = f71882fg_read8(data,
@@ -973,44 +1102,19 @@ static struct f71882fg_data *f71882fg_update_device(struct device *dev)
 			data->temp_hyst[1] = f71882fg_read8(data,
 						F71882FG_REG_TEMP_HYST(1));
 		}
+		/* All but the f71858fg / f8000 have this register */
+		if ((data->type != f71858fg) && (data->type != f8000)) {
+			reg  = f71882fg_read8(data, F71882FG_REG_TEMP_TYPE);
+			data->temp_type[1] = (reg & 0x02) ? 2 : 4;
+			data->temp_type[2] = (reg & 0x04) ? 2 : 4;
+			data->temp_type[3] = (reg & 0x08) ? 2 : 4;
+		}
 
-		if (data->type == f71862fg || data->type == f71882fg ||
-		    data->type == f71889fg) {
+		if (f71882fg_has_beep[data->type]) {
 			data->fan_beep = f71882fg_read8(data,
 						F71882FG_REG_FAN_BEEP);
 			data->temp_beep = f71882fg_read8(data,
 						F71882FG_REG_TEMP_BEEP);
-			/* Have to hardcode type, because temp1 is special */
-			reg  = f71882fg_read8(data, F71882FG_REG_TEMP_TYPE);
-			data->temp_type[2] = (reg & 0x04) ? 2 : 4;
-			data->temp_type[3] = (reg & 0x08) ? 2 : 4;
-		}
-		/* Determine temp index 1 sensor type */
-		if (data->type == f71889fg) {
-			reg2 = f71882fg_read8(data, F71882FG_REG_START);
-			switch ((reg2 & 0x60) >> 5) {
-			case 0x00: /* BJT / Thermistor */
-				data->temp_type[1] = (reg & 0x02) ? 2 : 4;
-				break;
-			case 0x01: /* AMDSI */
-				data->temp_type[1] = 5;
-				break;
-			case 0x02: /* PECI */
-			case 0x03: /* Ibex Peak ?? Report as PECI for now */
-				data->temp_type[1] = 6;
-				break;
-			}
-		} else {
-			reg2 = f71882fg_read8(data, F71882FG_REG_PECI);
-			if ((reg2 & 0x03) == 0x01)
-				data->temp_type[1] = 6; /* PECI */
-			else if ((reg2 & 0x03) == 0x02)
-				data->temp_type[1] = 5; /* AMDSI */
-			else if (data->type == f71862fg ||
-				 data->type == f71882fg)
-				data->temp_type[1] = (reg & 0x02) ? 2 : 4;
-			else /* f71858fg and f8000 only support BJT */
-				data->temp_type[1] = 2;
 		}
 
 		data->pwm_enable = f71882fg_read8(data,
@@ -1025,8 +1129,8 @@ static struct f71882fg_data *f71882fg_update_device(struct device *dev)
 			    f71882fg_read8(data,
 					   F71882FG_REG_POINT_MAPPING(nr));
 
-			if (data->type != f71862fg) {
-				int point;
+			switch (data->type) {
+			default:
 				for (point = 0; point < 5; point++) {
 					data->pwm_auto_point_pwm[nr][point] =
 						f71882fg_read8(data,
@@ -1039,7 +1143,14 @@ static struct f71882fg_data *f71882fg_update_device(struct device *dev)
 							F71882FG_REG_POINT_TEMP
 							(nr, point));
 				}
-			} else {
+				break;
+			case f71808e:
+			case f71869:
+				data->pwm_auto_point_pwm[nr][0] =
+					f71882fg_read8(data,
+						F71882FG_REG_POINT_PWM(nr, 0));
+				/* Fall through */
+			case f71862fg:
 				data->pwm_auto_point_pwm[nr][1] =
 					f71882fg_read8(data,
 						F71882FG_REG_POINT_PWM
@@ -1056,6 +1167,7 @@ static struct f71882fg_data *f71882fg_update_device(struct device *dev)
 					f71882fg_read8(data,
 						F71882FG_REG_POINT_TEMP
 						(nr, 3));
+				break;
 			}
 		}
 		data->last_limits = jiffies;
@@ -1067,7 +1179,8 @@ static struct f71882fg_data *f71882fg_update_device(struct device *dev)
 						F71882FG_REG_TEMP_STATUS);
 		data->temp_diode_open = f71882fg_read8(data,
 						F71882FG_REG_TEMP_DIODE_OPEN);
-		for (nr = data->temp_start; nr < 3 + data->temp_start; nr++)
+		for (nr = data->temp_start; nr < nr_temps + data->temp_start;
+									nr++)
 			data->temp[nr] = f71882fg_read_temp(data, nr);
 
 		data->fan_status = f71882fg_read8(data,
@@ -1083,17 +1196,18 @@ static struct f71882fg_data *f71882fg_update_device(struct device *dev)
 			data->pwm[nr] =
 			    f71882fg_read8(data, F71882FG_REG_PWM(nr));
 		}
-
 		/* The f8000 can monitor 1 more fan, but has no pwm for it */
 		if (data->type == f8000)
 			data->fan[3] = f71882fg_read16(data,
 						F71882FG_REG_FAN(3));
-		if (data->type == f71882fg || data->type == f71889fg)
+
+		if (f71882fg_has_in1_alarm[data->type])
 			data->in_status = f71882fg_read8(data,
 						F71882FG_REG_IN_STATUS);
-		for (nr = 0; nr < nr_ins; nr++)
-			data->in[nr] = f71882fg_read8(data,
-						F71882FG_REG_IN(nr));
+		for (nr = 0; nr < F71882FG_MAX_INS; nr++)
+			if (f71882fg_has_in[data->type][nr])
+				data->in[nr] = f71882fg_read8(data,
+							F71882FG_REG_IN(nr));
 
 		data->last_updated = jiffies;
 		data->valid = 1;
@@ -1882,7 +1996,7 @@ static ssize_t store_pwm_auto_point_temp(struct device *dev,
 
 	val /= 1000;
 
-	if (data->type == f71889fg)
+	if (data->auto_point_temp_signed)
 		val = SENSORS_LIMIT(val, -128, 127);
 	else
 		val = SENSORS_LIMIT(val, 0, 127);
@@ -1929,7 +2043,8 @@ static int __devinit f71882fg_probe(struct platform_device *pdev)
 	struct f71882fg_data *data;
 	struct f71882fg_sio_data *sio_data = pdev->dev.platform_data;
 	int err, i, nr_fans = (sio_data->type == f71882fg) ? 4 : 3;
-	u8 start_reg;
+	int nr_temps = (sio_data->type == f71808e) ? 2 : 3;
+	u8 start_reg, reg;
 
 	data = kzalloc(sizeof(struct f71882fg_data), GFP_KERNEL);
 	if (!data)
@@ -1968,37 +2083,72 @@ static int __devinit f71882fg_probe(struct platform_device *pdev)
 				/* The f71858fg temperature alarms behave as
 				   the f8000 alarms in this mode */
 				err = f71882fg_create_sysfs_files(pdev,
-					f8000_in_temp_attr,
-					ARRAY_SIZE(f8000_in_temp_attr));
+					f8000_temp_attr,
+					ARRAY_SIZE(f8000_temp_attr));
 			else
 				err = f71882fg_create_sysfs_files(pdev,
-					f71858fg_in_temp_attr,
-					ARRAY_SIZE(f71858fg_in_temp_attr));
-			break;
-		case f71882fg:
-		case f71889fg:
-			err = f71882fg_create_sysfs_files(pdev,
-					fxxxx_in1_alarm_attr,
-					ARRAY_SIZE(fxxxx_in1_alarm_attr));
-			if (err)
-				goto exit_unregister_sysfs;
-			/* fall through! */
-		case f71862fg:
-			err = f71882fg_create_sysfs_files(pdev,
-					fxxxx_in_temp_attr,
-					ARRAY_SIZE(fxxxx_in_temp_attr));
+					f71858fg_temp_attr,
+					ARRAY_SIZE(f71858fg_temp_attr));
 			break;
 		case f8000:
 			err = f71882fg_create_sysfs_files(pdev,
-					f8000_in_temp_attr,
-					ARRAY_SIZE(f8000_in_temp_attr));
+					f8000_temp_attr,
+					ARRAY_SIZE(f8000_temp_attr));
 			break;
+		default:
+			err = f71882fg_create_sysfs_files(pdev,
+				&fxxxx_temp_attr[0][0],
+				ARRAY_SIZE(fxxxx_temp_attr[0]) * nr_temps);
 		}
 		if (err)
 			goto exit_unregister_sysfs;
+
+		if (f71882fg_has_beep[data->type]) {
+			err = f71882fg_create_sysfs_files(pdev,
+					&fxxxx_temp_beep_attr[0][0],
+					ARRAY_SIZE(fxxxx_temp_beep_attr[0])
+						* nr_temps);
+			if (err)
+				goto exit_unregister_sysfs;
+		}
+
+		for (i = 0; i < F71882FG_MAX_INS; i++) {
+			if (f71882fg_has_in[data->type][i]) {
+				err = device_create_file(&pdev->dev,
+						&fxxxx_in_attr[i].dev_attr);
+				if (err)
+					goto exit_unregister_sysfs;
+			}
+		}
+		if (f71882fg_has_in1_alarm[data->type]) {
+			err = f71882fg_create_sysfs_files(pdev,
+					fxxxx_in1_alarm_attr,
+					ARRAY_SIZE(fxxxx_in1_alarm_attr));
+			if (err)
+				goto exit_unregister_sysfs;
+		}
 	}
 
 	if (start_reg & 0x02) {
+		switch (data->type) {
+		case f71808e:
+		case f71869:
+			/* These always have signed auto point temps */
+			data->auto_point_temp_signed = 1;
+			/* Fall through to select correct fan/pwm reg bank! */
+		case f71889fg:
+		case f71889ed:
+			reg = f71882fg_read8(data, F71882FG_REG_FAN_FAULT_T);
+			if (reg & F71882FG_FAN_NEG_TEMP_EN)
+				data->auto_point_temp_signed = 1;
+			/* Ensure banked pwm registers point to right bank */
+			reg &= ~F71882FG_FAN_PROG_SEL;
+			f71882fg_write8(data, F71882FG_REG_FAN_FAULT_T, reg);
+			break;
+		default:
+			break;
+		}
+
 		data->pwm_enable =
 			f71882fg_read8(data, F71882FG_REG_PWM_ENABLE);
 
@@ -2013,8 +2163,11 @@ static int __devinit f71882fg_probe(struct platform_device *pdev)
 		case f71862fg:
 			err = (data->pwm_enable & 0x15) != 0x15;
 			break;
+		case f71808e:
+		case f71869:
 		case f71882fg:
 		case f71889fg:
+		case f71889ed:
 			err = 0;
 			break;
 		case f8000:
@@ -2034,8 +2187,7 @@ static int __devinit f71882fg_probe(struct platform_device *pdev)
 		if (err)
 			goto exit_unregister_sysfs;
 
-		if (data->type == f71862fg || data->type == f71882fg ||
-		    data->type == f71889fg) {
+		if (f71882fg_has_beep[data->type]) {
 			err = f71882fg_create_sysfs_files(pdev,
 					fxxxx_fan_beep_attr, nr_fans);
 			if (err)
@@ -2043,11 +2195,42 @@ static int __devinit f71882fg_probe(struct platform_device *pdev)
 		}
 
 		switch (data->type) {
+		case f71808e:
+		case f71869:
+		case f71889fg:
+		case f71889ed:
+			for (i = 0; i < nr_fans; i++) {
+				data->pwm_auto_point_mapping[i] =
+					f71882fg_read8(data,
+						F71882FG_REG_POINT_MAPPING(i));
+				if ((data->pwm_auto_point_mapping[i] & 0x80) ||
+				    (data->pwm_auto_point_mapping[i] & 3) == 0)
+					break;
+			}
+			if (i != nr_fans) {
+				dev_warn(&pdev->dev,
+					 "Auto pwm controlled by raw digital "
+					 "data, disabling pwm auto_point "
+					 "sysfs attributes\n");
+				goto no_pwm_auto_point;
+			}
+			break;
+		default:
+			break;
+		}
+
+		switch (data->type) {
 		case f71862fg:
 			err = f71882fg_create_sysfs_files(pdev,
 					f71862fg_auto_pwm_attr,
 					ARRAY_SIZE(f71862fg_auto_pwm_attr));
 			break;
+		case f71808e:
+		case f71869:
+			err = f71882fg_create_sysfs_files(pdev,
+					f71869_auto_pwm_attr,
+					ARRAY_SIZE(f71869_auto_pwm_attr));
+			break;
 		case f8000:
 			err = f71882fg_create_sysfs_files(pdev,
 					f8000_fan_attr,
@@ -2058,23 +2241,7 @@ static int __devinit f71882fg_probe(struct platform_device *pdev)
 					f8000_auto_pwm_attr,
 					ARRAY_SIZE(f8000_auto_pwm_attr));
 			break;
-		case f71889fg:
-			for (i = 0; i < nr_fans; i++) {
-				data->pwm_auto_point_mapping[i] =
-					f71882fg_read8(data,
-						F71882FG_REG_POINT_MAPPING(i));
-				if (data->pwm_auto_point_mapping[i] & 0x80)
-					break;
-			}
-			if (i != nr_fans) {
-				dev_warn(&pdev->dev,
-					 "Auto pwm controlled by raw digital "
-					 "data, disabling pwm auto_point "
-					 "sysfs attributes\n");
-				break;
-			}
-			/* fall through */
-		default: /* f71858fg / f71882fg */
+		default:
 			err = f71882fg_create_sysfs_files(pdev,
 				&fxxxx_auto_pwm_attr[0][0],
 				ARRAY_SIZE(fxxxx_auto_pwm_attr[0]) * nr_fans);
@@ -2082,6 +2249,7 @@ static int __devinit f71882fg_probe(struct platform_device *pdev)
 		if (err)
 			goto exit_unregister_sysfs;
 
+no_pwm_auto_point:
 		for (i = 0; i < nr_fans; i++)
 			dev_info(&pdev->dev, "Fan: %d is in %s mode\n", i + 1,
 				 (data->pwm_enable & (1 << 2 * i)) ?
@@ -2108,7 +2276,8 @@ exit_free:
 static int f71882fg_remove(struct platform_device *pdev)
 {
 	struct f71882fg_data *data = platform_get_drvdata(pdev);
-	int nr_fans = (data->type == f71882fg) ? 4 : 3;
+	int i, nr_fans = (data->type == f71882fg) ? 4 : 3;
+	int nr_temps = (data->type == f71808e) ? 2 : 3;
 	u8 start_reg = f71882fg_read8(data, F71882FG_REG_START);
 
 	if (data->hwmon_dev)
@@ -2121,29 +2290,39 @@ static int f71882fg_remove(struct platform_device *pdev)
 		case f71858fg:
 			if (data->temp_config & 0x10)
 				f71882fg_remove_sysfs_files(pdev,
-					f8000_in_temp_attr,
-					ARRAY_SIZE(f8000_in_temp_attr));
+					f8000_temp_attr,
+					ARRAY_SIZE(f8000_temp_attr));
 			else
 				f71882fg_remove_sysfs_files(pdev,
-					f71858fg_in_temp_attr,
-					ARRAY_SIZE(f71858fg_in_temp_attr));
-			break;
-		case f71882fg:
-		case f71889fg:
-			f71882fg_remove_sysfs_files(pdev,
-					fxxxx_in1_alarm_attr,
-					ARRAY_SIZE(fxxxx_in1_alarm_attr));
-			/* fall through! */
-		case f71862fg:
-			f71882fg_remove_sysfs_files(pdev,
-					fxxxx_in_temp_attr,
-					ARRAY_SIZE(fxxxx_in_temp_attr));
+					f71858fg_temp_attr,
+					ARRAY_SIZE(f71858fg_temp_attr));
 			break;
 		case f8000:
 			f71882fg_remove_sysfs_files(pdev,
-					f8000_in_temp_attr,
-					ARRAY_SIZE(f8000_in_temp_attr));
+					f8000_temp_attr,
+					ARRAY_SIZE(f8000_temp_attr));
 			break;
+		default:
+			f71882fg_remove_sysfs_files(pdev,
+				&fxxxx_temp_attr[0][0],
+				ARRAY_SIZE(fxxxx_temp_attr[0]) * nr_temps);
+		}
+		if (f71882fg_has_beep[data->type]) {
+			f71882fg_remove_sysfs_files(pdev,
+			       &fxxxx_temp_beep_attr[0][0],
+			       ARRAY_SIZE(fxxxx_temp_beep_attr[0]) * nr_temps);
+		}
+
+		for (i = 0; i < F71882FG_MAX_INS; i++) {
+			if (f71882fg_has_in[data->type][i]) {
+				device_remove_file(&pdev->dev,
+						&fxxxx_in_attr[i].dev_attr);
+			}
+		}
+		if (f71882fg_has_in1_alarm[data->type]) {
+			f71882fg_remove_sysfs_files(pdev,
+					fxxxx_in1_alarm_attr,
+					ARRAY_SIZE(fxxxx_in1_alarm_attr));
 		}
 	}
 
@@ -2151,10 +2330,10 @@ static int f71882fg_remove(struct platform_device *pdev)
 		f71882fg_remove_sysfs_files(pdev, &fxxxx_fan_attr[0][0],
 				ARRAY_SIZE(fxxxx_fan_attr[0]) * nr_fans);
 
-		if (data->type == f71862fg || data->type == f71882fg ||
-		    data->type == f71889fg)
+		if (f71882fg_has_beep[data->type]) {
 			f71882fg_remove_sysfs_files(pdev,
 					fxxxx_fan_beep_attr, nr_fans);
+		}
 
 		switch (data->type) {
 		case f71862fg:
@@ -2162,6 +2341,12 @@ static int f71882fg_remove(struct platform_device *pdev)
 					f71862fg_auto_pwm_attr,
 					ARRAY_SIZE(f71862fg_auto_pwm_attr));
 			break;
+		case f71808e:
+		case f71869:
+			f71882fg_remove_sysfs_files(pdev,
+					f71869_auto_pwm_attr,
+					ARRAY_SIZE(f71869_auto_pwm_attr));
+			break;
 		case f8000:
 			f71882fg_remove_sysfs_files(pdev,
 					f8000_fan_attr,
@@ -2170,7 +2355,7 @@ static int f71882fg_remove(struct platform_device *pdev)
 					f8000_auto_pwm_attr,
 					ARRAY_SIZE(f8000_auto_pwm_attr));
 			break;
-		default: /* f71858fg / f71882fg / f71889fg */
+		default:
 			f71882fg_remove_sysfs_files(pdev,
 				&fxxxx_auto_pwm_attr[0][0],
 				ARRAY_SIZE(fxxxx_auto_pwm_attr[0]) * nr_fans);
@@ -2200,18 +2385,27 @@ static int __init f71882fg_find(int sioaddr, unsigned short *address,
 
 	devid = force_id ? force_id : superio_inw(sioaddr, SIO_REG_DEVID);
 	switch (devid) {
+	case SIO_F71808E_ID:
+		sio_data->type = f71808e;
+		break;
 	case SIO_F71858_ID:
 		sio_data->type = f71858fg;
 		break;
 	case SIO_F71862_ID:
 		sio_data->type = f71862fg;
 		break;
+	case SIO_F71869_ID:
+		sio_data->type = f71869;
+		break;
 	case SIO_F71882_ID:
 		sio_data->type = f71882fg;
 		break;
 	case SIO_F71889_ID:
 		sio_data->type = f71889fg;
 		break;
+	case SIO_F71889E_ID:
+		sio_data->type = f71889ed;
+		break;
 	case SIO_F8000_ID:
 		sio_data->type = f8000;
 		break;
diff --git a/drivers/hwmon/lineage-pem.c b/drivers/hwmon/lineage-pem.c
new file mode 100644
index 000000000000..58eded27f385
--- /dev/null
+++ b/drivers/hwmon/lineage-pem.c
@@ -0,0 +1,586 @@
+/*
+ * Driver for Lineage Compact Power Line series of power entry modules.
+ *
+ * Copyright (C) 2010, 2011 Ericsson AB.
+ *
+ * Documentation:
+ *  http://www.lineagepower.com/oem/pdf/CPLI2C.pdf
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+
+/*
+ * This driver supports various Lineage Compact Power Line DC/DC and AC/DC
+ * converters such as CP1800, CP2000AC, CP2000DC, CP2100DC, and others.
+ *
+ * The devices are nominally PMBus compliant. However, most standard PMBus
+ * commands are not supported. Specifically, all hardware monitoring and
+ * status reporting commands are non-standard. For this reason, a standard
+ * PMBus driver can not be used.
+ *
+ * All Lineage CPL devices have a built-in I2C bus master selector (PCA9541).
+ * To ensure device access, this driver should only be used as client driver
+ * to the pca9541 I2C master selector driver.
+ */
+
+/* Command codes */
+#define PEM_OPERATION		0x01
+#define PEM_CLEAR_INFO_FLAGS	0x03
+#define PEM_VOUT_COMMAND	0x21
+#define PEM_VOUT_OV_FAULT_LIMIT	0x40
+#define PEM_READ_DATA_STRING	0xd0
+#define PEM_READ_INPUT_STRING	0xdc
+#define PEM_READ_FIRMWARE_REV	0xdd
+#define PEM_READ_RUN_TIMER	0xde
+#define PEM_FAN_HI_SPEED	0xdf
+#define PEM_FAN_NORMAL_SPEED	0xe0
+#define PEM_READ_FAN_SPEED	0xe1
+
+/* offsets in data string */
+#define PEM_DATA_STATUS_2	0
+#define PEM_DATA_STATUS_1	1
+#define PEM_DATA_ALARM_2	2
+#define PEM_DATA_ALARM_1	3
+#define PEM_DATA_VOUT_LSB	4
+#define PEM_DATA_VOUT_MSB	5
+#define PEM_DATA_CURRENT	6
+#define PEM_DATA_TEMP		7
+
+/* Virtual entries, to report constants */
+#define PEM_DATA_TEMP_MAX	10
+#define PEM_DATA_TEMP_CRIT	11
+
+/* offsets in input string */
+#define PEM_INPUT_VOLTAGE	0
+#define PEM_INPUT_POWER_LSB	1
+#define PEM_INPUT_POWER_MSB	2
+
+/* offsets in fan data */
+#define PEM_FAN_ADJUSTMENT	0
+#define PEM_FAN_FAN1		1
+#define PEM_FAN_FAN2		2
+#define PEM_FAN_FAN3		3
+
+/* Status register bits */
+#define STS1_OUTPUT_ON		(1 << 0)
+#define STS1_LEDS_FLASHING	(1 << 1)
+#define STS1_EXT_FAULT		(1 << 2)
+#define STS1_SERVICE_LED_ON	(1 << 3)
+#define STS1_SHUTDOWN_OCCURRED	(1 << 4)
+#define STS1_INT_FAULT		(1 << 5)
+#define STS1_ISOLATION_TEST_OK	(1 << 6)
+
+#define STS2_ENABLE_PIN_HI	(1 << 0)
+#define STS2_DATA_OUT_RANGE	(1 << 1)
+#define STS2_RESTARTED_OK	(1 << 1)
+#define STS2_ISOLATION_TEST_FAIL (1 << 3)
+#define STS2_HIGH_POWER_CAP	(1 << 4)
+#define STS2_INVALID_INSTR	(1 << 5)
+#define STS2_WILL_RESTART	(1 << 6)
+#define STS2_PEC_ERR		(1 << 7)
+
+/* Alarm register bits */
+#define ALRM1_VIN_OUT_LIMIT	(1 << 0)
+#define ALRM1_VOUT_OUT_LIMIT	(1 << 1)
+#define ALRM1_OV_VOLT_SHUTDOWN	(1 << 2)
+#define ALRM1_VIN_OVERCURRENT	(1 << 3)
+#define ALRM1_TEMP_WARNING	(1 << 4)
+#define ALRM1_TEMP_SHUTDOWN	(1 << 5)
+#define ALRM1_PRIMARY_FAULT	(1 << 6)
+#define ALRM1_POWER_LIMIT	(1 << 7)
+
+#define ALRM2_5V_OUT_LIMIT	(1 << 1)
+#define ALRM2_TEMP_FAULT	(1 << 2)
+#define ALRM2_OV_LOW		(1 << 3)
+#define ALRM2_DCDC_TEMP_HIGH	(1 << 4)
+#define ALRM2_PRI_TEMP_HIGH	(1 << 5)
+#define ALRM2_NO_PRIMARY	(1 << 6)
+#define ALRM2_FAN_FAULT		(1 << 7)
+
+#define FIRMWARE_REV_LEN	4
+#define DATA_STRING_LEN		9
+#define INPUT_STRING_LEN	5	/* 4 for most devices	*/
+#define FAN_SPEED_LEN		5
+
+struct pem_data {
+	struct device *hwmon_dev;
+
+	struct mutex update_lock;
+	bool valid;
+	bool fans_supported;
+	int input_length;
+	unsigned long last_updated;	/* in jiffies */
+
+	u8 firmware_rev[FIRMWARE_REV_LEN];
+	u8 data_string[DATA_STRING_LEN];
+	u8 input_string[INPUT_STRING_LEN];
+	u8 fan_speed[FAN_SPEED_LEN];
+};
+
+static int pem_read_block(struct i2c_client *client, u8 command, u8 *data,
+			  int data_len)
+{
+	u8 block_buffer[I2C_SMBUS_BLOCK_MAX];
+	int result;
+
+	result = i2c_smbus_read_block_data(client, command, block_buffer);
+	if (unlikely(result < 0))
+		goto abort;
+	if (unlikely(result == 0xff || result != data_len)) {
+		result = -EIO;
+		goto abort;
+	}
+	memcpy(data, block_buffer, data_len);
+	result = 0;
+abort:
+	return result;
+}
+
+static struct pem_data *pem_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct pem_data *data = i2c_get_clientdata(client);
+	struct pem_data *ret = data;
+
+	mutex_lock(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
+		int result;
+
+		/* Read data string */
+		result = pem_read_block(client, PEM_READ_DATA_STRING,
+					data->data_string,
+					sizeof(data->data_string));
+		if (unlikely(result < 0)) {
+			ret = ERR_PTR(result);
+			goto abort;
+		}
+
+		/* Read input string */
+		if (data->input_length) {
+			result = pem_read_block(client, PEM_READ_INPUT_STRING,
+						data->input_string,
+						data->input_length);
+			if (unlikely(result < 0)) {
+				ret = ERR_PTR(result);
+				goto abort;
+			}
+		}
+
+		/* Read fan speeds */
+		if (data->fans_supported) {
+			result = pem_read_block(client, PEM_READ_FAN_SPEED,
+						data->fan_speed,
+						sizeof(data->fan_speed));
+			if (unlikely(result < 0)) {
+				ret = ERR_PTR(result);
+				goto abort;
+			}
+		}
+
+		i2c_smbus_write_byte(client, PEM_CLEAR_INFO_FLAGS);
+
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+abort:
+	mutex_unlock(&data->update_lock);
+	return ret;
+}
+
+static long pem_get_data(u8 *data, int len, int index)
+{
+	long val;
+
+	switch (index) {
+	case PEM_DATA_VOUT_LSB:
+		val = (data[index] + (data[index+1] << 8)) * 5 / 2;
+		break;
+	case PEM_DATA_CURRENT:
+		val = data[index] * 200;
+		break;
+	case PEM_DATA_TEMP:
+		val = data[index] * 1000;
+		break;
+	case PEM_DATA_TEMP_MAX:
+		val = 97 * 1000;	/* 97 degrees C per datasheet */
+		break;
+	case PEM_DATA_TEMP_CRIT:
+		val = 107 * 1000;	/* 107 degrees C per datasheet */
+		break;
+	default:
+		WARN_ON_ONCE(1);
+		val = 0;
+	}
+	return val;
+}
+
+static long pem_get_input(u8 *data, int len, int index)
+{
+	long val;
+
+	switch (index) {
+	case PEM_INPUT_VOLTAGE:
+		if (len == INPUT_STRING_LEN)
+			val = (data[index] + (data[index+1] << 8) - 75) * 1000;
+		else
+			val = (data[index] - 75) * 1000;
+		break;
+	case PEM_INPUT_POWER_LSB:
+		if (len == INPUT_STRING_LEN)
+			index++;
+		val = (data[index] + (data[index+1] << 8)) * 1000000L;
+		break;
+	default:
+		WARN_ON_ONCE(1);
+		val = 0;
+	}
+	return val;
+}
+
+static long pem_get_fan(u8 *data, int len, int index)
+{
+	long val;
+
+	switch (index) {
+	case PEM_FAN_FAN1:
+	case PEM_FAN_FAN2:
+	case PEM_FAN_FAN3:
+		val = data[index] * 100;
+		break;
+	default:
+		WARN_ON_ONCE(1);
+		val = 0;
+	}
+	return val;
+}
+
+/*
+ * Show boolean, either a fault or an alarm.
+ * .nr points to the register, .index is the bit mask to check
+ */
+static ssize_t pem_show_bool(struct device *dev,
+			     struct device_attribute *da, char *buf)
+{
+	struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(da);
+	struct pem_data *data = pem_update_device(dev);
+	u8 status;
+
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+
+	status = data->data_string[attr->nr] & attr->index;
+	return snprintf(buf, PAGE_SIZE, "%d\n", !!status);
+}
+
+static ssize_t pem_show_data(struct device *dev, struct device_attribute *da,
+			     char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+	struct pem_data *data = pem_update_device(dev);
+	long value;
+
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+
+	value = pem_get_data(data->data_string, sizeof(data->data_string),
+			     attr->index);
+
+	return snprintf(buf, PAGE_SIZE, "%ld\n", value);
+}
+
+static ssize_t pem_show_input(struct device *dev, struct device_attribute *da,
+			      char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+	struct pem_data *data = pem_update_device(dev);
+	long value;
+
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+
+	value = pem_get_input(data->input_string, sizeof(data->input_string),
+			      attr->index);
+
+	return snprintf(buf, PAGE_SIZE, "%ld\n", value);
+}
+
+static ssize_t pem_show_fan(struct device *dev, struct device_attribute *da,
+			    char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+	struct pem_data *data = pem_update_device(dev);
+	long value;
+
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+
+	value = pem_get_fan(data->fan_speed, sizeof(data->fan_speed),
+			    attr->index);
+
+	return snprintf(buf, PAGE_SIZE, "%ld\n", value);
+}
+
+/* Voltages */
+static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, pem_show_data, NULL,
+			  PEM_DATA_VOUT_LSB);
+static SENSOR_DEVICE_ATTR_2(in1_alarm, S_IRUGO, pem_show_bool, NULL,
+			    PEM_DATA_ALARM_1, ALRM1_VOUT_OUT_LIMIT);
+static SENSOR_DEVICE_ATTR_2(in1_crit_alarm, S_IRUGO, pem_show_bool, NULL,
+			    PEM_DATA_ALARM_1, ALRM1_OV_VOLT_SHUTDOWN);
+static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, pem_show_input, NULL,
+			  PEM_INPUT_VOLTAGE);
+static SENSOR_DEVICE_ATTR_2(in2_alarm, S_IRUGO, pem_show_bool, NULL,
+			    PEM_DATA_ALARM_1,
+			    ALRM1_VIN_OUT_LIMIT | ALRM1_PRIMARY_FAULT);
+
+/* Currents */
+static SENSOR_DEVICE_ATTR(curr1_input, S_IRUGO, pem_show_data, NULL,
+			  PEM_DATA_CURRENT);
+static SENSOR_DEVICE_ATTR_2(curr1_alarm, S_IRUGO, pem_show_bool, NULL,
+			    PEM_DATA_ALARM_1, ALRM1_VIN_OVERCURRENT);
+
+/* Power */
+static SENSOR_DEVICE_ATTR(power1_input, S_IRUGO, pem_show_input, NULL,
+			  PEM_INPUT_POWER_LSB);
+static SENSOR_DEVICE_ATTR_2(power1_alarm, S_IRUGO, pem_show_bool, NULL,
+			    PEM_DATA_ALARM_1, ALRM1_POWER_LIMIT);
+
+/* Fans */
+static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, pem_show_fan, NULL,
+			  PEM_FAN_FAN1);
+static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, pem_show_fan, NULL,
+			  PEM_FAN_FAN2);
+static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, pem_show_fan, NULL,
+			  PEM_FAN_FAN3);
+static SENSOR_DEVICE_ATTR_2(fan1_alarm, S_IRUGO, pem_show_bool, NULL,
+			    PEM_DATA_ALARM_2, ALRM2_FAN_FAULT);
+
+/* Temperatures */
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, pem_show_data, NULL,
+			  PEM_DATA_TEMP);
+static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, pem_show_data, NULL,
+			  PEM_DATA_TEMP_MAX);
+static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO, pem_show_data, NULL,
+			  PEM_DATA_TEMP_CRIT);
+static SENSOR_DEVICE_ATTR_2(temp1_alarm, S_IRUGO, pem_show_bool, NULL,
+			    PEM_DATA_ALARM_1, ALRM1_TEMP_WARNING);
+static SENSOR_DEVICE_ATTR_2(temp1_crit_alarm, S_IRUGO, pem_show_bool, NULL,
+			    PEM_DATA_ALARM_1, ALRM1_TEMP_SHUTDOWN);
+static SENSOR_DEVICE_ATTR_2(temp1_fault, S_IRUGO, pem_show_bool, NULL,
+			    PEM_DATA_ALARM_2, ALRM2_TEMP_FAULT);
+
+static struct attribute *pem_attributes[] = {
+	&sensor_dev_attr_in1_input.dev_attr.attr,
+	&sensor_dev_attr_in1_alarm.dev_attr.attr,
+	&sensor_dev_attr_in1_crit_alarm.dev_attr.attr,
+	&sensor_dev_attr_in2_alarm.dev_attr.attr,
+
+	&sensor_dev_attr_curr1_alarm.dev_attr.attr,
+
+	&sensor_dev_attr_power1_alarm.dev_attr.attr,
+
+	&sensor_dev_attr_fan1_alarm.dev_attr.attr,
+
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	&sensor_dev_attr_temp1_max.dev_attr.attr,
+	&sensor_dev_attr_temp1_crit.dev_attr.attr,
+	&sensor_dev_attr_temp1_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp1_fault.dev_attr.attr,
+
+	NULL,
+};
+
+static const struct attribute_group pem_group = {
+	.attrs = pem_attributes,
+};
+
+static struct attribute *pem_input_attributes[] = {
+	&sensor_dev_attr_in2_input.dev_attr.attr,
+	&sensor_dev_attr_curr1_input.dev_attr.attr,
+	&sensor_dev_attr_power1_input.dev_attr.attr,
+};
+
+static const struct attribute_group pem_input_group = {
+	.attrs = pem_input_attributes,
+};
+
+static struct attribute *pem_fan_attributes[] = {
+	&sensor_dev_attr_fan1_input.dev_attr.attr,
+	&sensor_dev_attr_fan2_input.dev_attr.attr,
+	&sensor_dev_attr_fan3_input.dev_attr.attr,
+};
+
+static const struct attribute_group pem_fan_group = {
+	.attrs = pem_fan_attributes,
+};
+
+static int pem_probe(struct i2c_client *client,
+		     const struct i2c_device_id *id)
+{
+	struct i2c_adapter *adapter = client->adapter;
+	struct pem_data *data;
+	int ret;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BLOCK_DATA
+				     | I2C_FUNC_SMBUS_WRITE_BYTE))
+		return -ENODEV;
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, data);
+	mutex_init(&data->update_lock);
+
+	/*
+	 * We use the next two commands to determine if the device is really
+	 * there.
+	 */
+	ret = pem_read_block(client, PEM_READ_FIRMWARE_REV,
+			     data->firmware_rev, sizeof(data->firmware_rev));
+	if (ret < 0)
+		goto out_kfree;
+
+	ret = i2c_smbus_write_byte(client, PEM_CLEAR_INFO_FLAGS);
+	if (ret < 0)
+		goto out_kfree;
+
+	dev_info(&client->dev, "Firmware revision %d.%d.%d\n",
+		 data->firmware_rev[0], data->firmware_rev[1],
+		 data->firmware_rev[2]);
+
+	/* Register sysfs hooks */
+	ret = sysfs_create_group(&client->dev.kobj, &pem_group);
+	if (ret)
+		goto out_kfree;
+
+	/*
+	 * Check if input readings are supported.
+	 * This is the case if we can read input data,
+	 * and if the returned data is not all zeros.
+	 * Note that input alarms are always supported.
+	 */
+	ret = pem_read_block(client, PEM_READ_INPUT_STRING,
+			     data->input_string,
+			     sizeof(data->input_string) - 1);
+	if (!ret && (data->input_string[0] || data->input_string[1] ||
+		     data->input_string[2]))
+		data->input_length = sizeof(data->input_string) - 1;
+	else if (ret < 0) {
+		/* Input string is one byte longer for some devices */
+		ret = pem_read_block(client, PEM_READ_INPUT_STRING,
+				    data->input_string,
+				    sizeof(data->input_string));
+		if (!ret && (data->input_string[0] || data->input_string[1] ||
+			    data->input_string[2] || data->input_string[3]))
+			data->input_length = sizeof(data->input_string);
+	}
+	ret = 0;
+	if (data->input_length) {
+		ret = sysfs_create_group(&client->dev.kobj, &pem_input_group);
+		if (ret)
+			goto out_remove_groups;
+	}
+
+	/*
+	 * Check if fan speed readings are supported.
+	 * This is the case if we can read fan speed data,
+	 * and if the returned data is not all zeros.
+	 * Note that the fan alarm is always supported.
+	 */
+	ret = pem_read_block(client, PEM_READ_FAN_SPEED,
+			     data->fan_speed,
+			     sizeof(data->fan_speed));
+	if (!ret && (data->fan_speed[0] || data->fan_speed[1] ||
+		     data->fan_speed[2] || data->fan_speed[3])) {
+		data->fans_supported = true;
+		ret = sysfs_create_group(&client->dev.kobj, &pem_fan_group);
+		if (ret)
+			goto out_remove_groups;
+	}
+
+	data->hwmon_dev = hwmon_device_register(&client->dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		ret = PTR_ERR(data->hwmon_dev);
+		goto out_remove_groups;
+	}
+
+	return 0;
+
+out_remove_groups:
+	sysfs_remove_group(&client->dev.kobj, &pem_input_group);
+	sysfs_remove_group(&client->dev.kobj, &pem_fan_group);
+	sysfs_remove_group(&client->dev.kobj, &pem_group);
+out_kfree:
+	kfree(data);
+	return ret;
+}
+
+static int pem_remove(struct i2c_client *client)
+{
+	struct pem_data *data = i2c_get_clientdata(client);
+
+	hwmon_device_unregister(data->hwmon_dev);
+
+	sysfs_remove_group(&client->dev.kobj, &pem_input_group);
+	sysfs_remove_group(&client->dev.kobj, &pem_fan_group);
+	sysfs_remove_group(&client->dev.kobj, &pem_group);
+
+	kfree(data);
+	return 0;
+}
+
+static const struct i2c_device_id pem_id[] = {
+	{"lineage_pem", 0},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, pem_id);
+
+static struct i2c_driver pem_driver = {
+	.driver = {
+		   .name = "lineage_pem",
+		   },
+	.probe = pem_probe,
+	.remove = pem_remove,
+	.id_table = pem_id,
+};
+
+static int __init pem_init(void)
+{
+	return i2c_add_driver(&pem_driver);
+}
+
+static void __exit pem_exit(void)
+{
+	i2c_del_driver(&pem_driver);
+}
+
+MODULE_AUTHOR("Guenter Roeck <guenter.roeck@ericsson.com>");
+MODULE_DESCRIPTION("Lineage CPL PEM hardware monitoring driver");
+MODULE_LICENSE("GPL");
+
+module_init(pem_init);
+module_exit(pem_exit);
diff --git a/drivers/hwmon/lis3lv02d_spi.c b/drivers/hwmon/lis3lv02d_spi.c
index 2549de1de4e2..c1f8a8fbf694 100644
--- a/drivers/hwmon/lis3lv02d_spi.c
+++ b/drivers/hwmon/lis3lv02d_spi.c
@@ -16,6 +16,7 @@
 #include <linux/interrupt.h>
 #include <linux/workqueue.h>
 #include <linux/spi/spi.h>
+#include <linux/pm.h>
 
 #include "lis3lv02d.h"
 
@@ -88,9 +89,10 @@ static int __devexit lis302dl_spi_remove(struct spi_device *spi)
 	return lis3lv02d_remove_fs(&lis3_dev);
 }
 
-#ifdef CONFIG_PM
-static int lis3lv02d_spi_suspend(struct spi_device *spi, pm_message_t mesg)
+#ifdef CONFIG_PM_SLEEP
+static int lis3lv02d_spi_suspend(struct device *dev)
 {
+	struct spi_device *spi = to_spi_device(dev);
 	struct lis3lv02d *lis3 = spi_get_drvdata(spi);
 
 	if (!lis3->pdata || !lis3->pdata->wakeup_flags)
@@ -99,8 +101,9 @@ static int lis3lv02d_spi_suspend(struct spi_device *spi, pm_message_t mesg)
 	return 0;
 }
 
-static int lis3lv02d_spi_resume(struct spi_device *spi)
+static int lis3lv02d_spi_resume(struct device *dev)
 {
+	struct spi_device *spi = to_spi_device(dev);
 	struct lis3lv02d *lis3 = spi_get_drvdata(spi);
 
 	if (!lis3->pdata || !lis3->pdata->wakeup_flags)
@@ -108,21 +111,19 @@ static int lis3lv02d_spi_resume(struct spi_device *spi)
 
 	return 0;
 }
-
-#else
-#define lis3lv02d_spi_suspend	NULL
-#define lis3lv02d_spi_resume	NULL
 #endif
 
+static SIMPLE_DEV_PM_OPS(lis3lv02d_spi_pm, lis3lv02d_spi_suspend,
+			 lis3lv02d_spi_resume);
+
 static struct spi_driver lis302dl_spi_driver = {
 	.driver	 = {
 		.name   = DRV_NAME,
 		.owner  = THIS_MODULE,
+		.pm	= &lis3lv02d_spi_pm,
 	},
 	.probe	= lis302dl_spi_probe,
 	.remove	= __devexit_p(lis302dl_spi_remove),
-	.suspend = lis3lv02d_spi_suspend,
-	.resume  = lis3lv02d_spi_resume,
 };
 
 static int __init lis302dl_init(void)
diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c
index d2cc28660816..cf47e6e476ed 100644
--- a/drivers/hwmon/lm85.c
+++ b/drivers/hwmon/lm85.c
@@ -41,7 +41,7 @@ static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
 enum chips {
 	any_chip, lm85b, lm85c,
 	adm1027, adt7463, adt7468,
-	emc6d100, emc6d102, emc6d103
+	emc6d100, emc6d102, emc6d103, emc6d103s
 };
 
 /* The LM85 registers */
@@ -283,10 +283,6 @@ struct lm85_zone {
 	u8 hyst;	/* Low limit hysteresis. (0-15) */
 	u8 range;	/* Temp range, encoded */
 	s8 critical;	/* "All fans ON" temp limit */
-	u8 off_desired; /* Actual "off" temperature specified.  Preserved
-			 * to prevent "drift" as other autofan control
-			 * values change.
-			 */
 	u8 max_desired; /* Actual "max" temperature specified.  Preserved
 			 * to prevent "drift" as other autofan control
 			 * values change.
@@ -306,6 +302,8 @@ struct lm85_data {
 	const int *freq_map;
 	enum chips type;
 
+	bool has_vid5;	/* true if VID5 is configured for ADT7463 or ADT7468 */
+
 	struct mutex update_lock;
 	int valid;		/* !=0 if following fields are valid */
 	unsigned long last_reading;	/* In jiffies */
@@ -352,6 +350,7 @@ static const struct i2c_device_id lm85_id[] = {
 	{ "emc6d101", emc6d100 },
 	{ "emc6d102", emc6d102 },
 	{ "emc6d103", emc6d103 },
+	{ "emc6d103s", emc6d103s },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, lm85_id);
@@ -420,8 +419,7 @@ static ssize_t show_vid_reg(struct device *dev, struct device_attribute *attr,
 	struct lm85_data *data = lm85_update_device(dev);
 	int vid;
 
-	if ((data->type == adt7463 || data->type == adt7468) &&
-	    (data->vid & 0x80)) {
+	if (data->has_vid5) {
 		/* 6-pin VID (VRM 10) */
 		vid = vid_from_reg(data->vid & 0x3f, data->vrm);
 	} else {
@@ -891,7 +889,6 @@ static ssize_t set_temp_auto_temp_off(struct device *dev,
 
 	mutex_lock(&data->update_lock);
 	min = TEMP_FROM_REG(data->zone[nr].limit);
-	data->zone[nr].off_desired = TEMP_TO_REG(val);
 	data->zone[nr].hyst = HYST_TO_REG(min - val);
 	if (nr == 0 || nr == 1) {
 		lm85_write_value(client, LM85_REG_AFAN_HYST1,
@@ -934,18 +931,6 @@ static ssize_t set_temp_auto_temp_min(struct device *dev,
 		((data->zone[nr].range & 0x0f) << 4)
 		| (data->pwm_freq[nr] & 0x07));
 
-/* Update temp_auto_hyst and temp_auto_off */
-	data->zone[nr].hyst = HYST_TO_REG(TEMP_FROM_REG(
-		data->zone[nr].limit) - TEMP_FROM_REG(
-		data->zone[nr].off_desired));
-	if (nr == 0 || nr == 1) {
-		lm85_write_value(client, LM85_REG_AFAN_HYST1,
-			(data->zone[0].hyst << 4)
-			| data->zone[1].hyst);
-	} else {
-		lm85_write_value(client, LM85_REG_AFAN_HYST2,
-			(data->zone[2].hyst << 4));
-	}
 	mutex_unlock(&data->update_lock);
 	return count;
 }
@@ -1084,13 +1069,7 @@ static struct attribute *lm85_attributes[] = {
 	&sensor_dev_attr_pwm1_auto_pwm_min.dev_attr.attr,
 	&sensor_dev_attr_pwm2_auto_pwm_min.dev_attr.attr,
 	&sensor_dev_attr_pwm3_auto_pwm_min.dev_attr.attr,
-	&sensor_dev_attr_pwm1_auto_pwm_minctl.dev_attr.attr,
-	&sensor_dev_attr_pwm2_auto_pwm_minctl.dev_attr.attr,
-	&sensor_dev_attr_pwm3_auto_pwm_minctl.dev_attr.attr,
 
-	&sensor_dev_attr_temp1_auto_temp_off.dev_attr.attr,
-	&sensor_dev_attr_temp2_auto_temp_off.dev_attr.attr,
-	&sensor_dev_attr_temp3_auto_temp_off.dev_attr.attr,
 	&sensor_dev_attr_temp1_auto_temp_min.dev_attr.attr,
 	&sensor_dev_attr_temp2_auto_temp_min.dev_attr.attr,
 	&sensor_dev_attr_temp3_auto_temp_min.dev_attr.attr,
@@ -1111,6 +1090,26 @@ static const struct attribute_group lm85_group = {
 	.attrs = lm85_attributes,
 };
 
+static struct attribute *lm85_attributes_minctl[] = {
+	&sensor_dev_attr_pwm1_auto_pwm_minctl.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_pwm_minctl.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_pwm_minctl.dev_attr.attr,
+};
+
+static const struct attribute_group lm85_group_minctl = {
+	.attrs = lm85_attributes_minctl,
+};
+
+static struct attribute *lm85_attributes_temp_off[] = {
+	&sensor_dev_attr_temp1_auto_temp_off.dev_attr.attr,
+	&sensor_dev_attr_temp2_auto_temp_off.dev_attr.attr,
+	&sensor_dev_attr_temp3_auto_temp_off.dev_attr.attr,
+};
+
+static const struct attribute_group lm85_group_temp_off = {
+	.attrs = lm85_attributes_temp_off,
+};
+
 static struct attribute *lm85_attributes_in4[] = {
 	&sensor_dev_attr_in4_input.dev_attr.attr,
 	&sensor_dev_attr_in4_min.dev_attr.attr,
@@ -1258,16 +1257,9 @@ static int lm85_detect(struct i2c_client *client, struct i2c_board_info *info)
 		case LM85_VERSTEP_EMC6D103_A1:
 			type_name = "emc6d103";
 			break;
-		/*
-		 * Registers apparently missing in EMC6D103S/EMC6D103:A2
-		 * compared to EMC6D103:A0, EMC6D103:A1, and EMC6D102
-		 * (according to the data sheets), but used unconditionally
-		 * in the driver: 62[5:7], 6D[0:7], and 6E[0:7].
-		 * So skip EMC6D103S for now.
 		case LM85_VERSTEP_EMC6D103S:
 			type_name = "emc6d103s";
 			break;
-		 */
 		}
 	} else {
 		dev_dbg(&adapter->dev,
@@ -1280,6 +1272,19 @@ static int lm85_detect(struct i2c_client *client, struct i2c_board_info *info)
 	return 0;
 }
 
+static void lm85_remove_files(struct i2c_client *client, struct lm85_data *data)
+{
+	sysfs_remove_group(&client->dev.kobj, &lm85_group);
+	if (data->type != emc6d103s) {
+		sysfs_remove_group(&client->dev.kobj, &lm85_group_minctl);
+		sysfs_remove_group(&client->dev.kobj, &lm85_group_temp_off);
+	}
+	if (!data->has_vid5)
+		sysfs_remove_group(&client->dev.kobj, &lm85_group_in4);
+	if (data->type == emc6d100)
+		sysfs_remove_group(&client->dev.kobj, &lm85_group_in567);
+}
+
 static int lm85_probe(struct i2c_client *client,
 		      const struct i2c_device_id *id)
 {
@@ -1302,6 +1307,7 @@ static int lm85_probe(struct i2c_client *client,
 	case emc6d100:
 	case emc6d102:
 	case emc6d103:
+	case emc6d103s:
 		data->freq_map = adm1027_freq_map;
 		break;
 	default:
@@ -1319,11 +1325,26 @@ static int lm85_probe(struct i2c_client *client,
 	if (err)
 		goto err_kfree;
 
+	/* minctl and temp_off exist on all chips except emc6d103s */
+	if (data->type != emc6d103s) {
+		err = sysfs_create_group(&client->dev.kobj, &lm85_group_minctl);
+		if (err)
+			goto err_kfree;
+		err = sysfs_create_group(&client->dev.kobj,
+					 &lm85_group_temp_off);
+		if (err)
+			goto err_kfree;
+	}
+
 	/* The ADT7463/68 have an optional VRM 10 mode where pin 21 is used
 	   as a sixth digital VID input rather than an analog input. */
-	data->vid = lm85_read_value(client, LM85_REG_VID);
-	if (!((data->type == adt7463 || data->type == adt7468) &&
-	    (data->vid & 0x80)))
+	if (data->type == adt7463 || data->type == adt7468) {
+		u8 vid = lm85_read_value(client, LM85_REG_VID);
+		if (vid & 0x80)
+			data->has_vid5 = true;
+	}
+
+	if (!data->has_vid5)
 		if ((err = sysfs_create_group(&client->dev.kobj,
 					&lm85_group_in4)))
 			goto err_remove_files;
@@ -1344,10 +1365,7 @@ static int lm85_probe(struct i2c_client *client,
 
 	/* Error out and cleanup code */
  err_remove_files:
-	sysfs_remove_group(&client->dev.kobj, &lm85_group);
-	sysfs_remove_group(&client->dev.kobj, &lm85_group_in4);
-	if (data->type == emc6d100)
-		sysfs_remove_group(&client->dev.kobj, &lm85_group_in567);
+	lm85_remove_files(client, data);
  err_kfree:
 	kfree(data);
 	return err;
@@ -1357,10 +1375,7 @@ static int lm85_remove(struct i2c_client *client)
 {
 	struct lm85_data *data = i2c_get_clientdata(client);
 	hwmon_device_unregister(data->hwmon_dev);
-	sysfs_remove_group(&client->dev.kobj, &lm85_group);
-	sysfs_remove_group(&client->dev.kobj, &lm85_group_in4);
-	if (data->type == emc6d100)
-		sysfs_remove_group(&client->dev.kobj, &lm85_group_in567);
+	lm85_remove_files(client, data);
 	kfree(data);
 	return 0;
 }
@@ -1457,11 +1472,8 @@ static struct lm85_data *lm85_update_device(struct device *dev)
 			    lm85_read_value(client, LM85_REG_FAN(i));
 		}
 
-		if (!((data->type == adt7463 || data->type == adt7468) &&
-		    (data->vid & 0x80))) {
-			data->in[4] = lm85_read_value(client,
-				      LM85_REG_IN(4));
-		}
+		if (!data->has_vid5)
+			data->in[4] = lm85_read_value(client, LM85_REG_IN(4));
 
 		if (data->type == adt7468)
 			data->cfg5 = lm85_read_value(client, ADT7468_REG_CFG5);
@@ -1487,7 +1499,8 @@ static struct lm85_data *lm85_update_device(struct device *dev)
 			/* More alarm bits */
 			data->alarms |= lm85_read_value(client,
 						EMC6D100_REG_ALARM3) << 16;
-		} else if (data->type == emc6d102 || data->type == emc6d103) {
+		} else if (data->type == emc6d102 || data->type == emc6d103 ||
+			   data->type == emc6d103s) {
 			/* Have to read LSB bits after the MSB ones because
 			   the reading of the MSB bits has frozen the
 			   LSBs (backward from the ADM1027).
@@ -1528,8 +1541,7 @@ static struct lm85_data *lm85_update_device(struct device *dev)
 			    lm85_read_value(client, LM85_REG_FAN_MIN(i));
 		}
 
-		if (!((data->type == adt7463 || data->type == adt7468) &&
-		    (data->vid & 0x80))) {
+		if (!data->has_vid5)  {
 			data->in_min[4] = lm85_read_value(client,
 					  LM85_REG_IN_MIN(4));
 			data->in_max[4] = lm85_read_value(client,
@@ -1573,17 +1585,19 @@ static struct lm85_data *lm85_update_device(struct device *dev)
 			}
 		}
 
-		i = lm85_read_value(client, LM85_REG_AFAN_SPIKE1);
-		data->autofan[0].min_off = (i & 0x20) != 0;
-		data->autofan[1].min_off = (i & 0x40) != 0;
-		data->autofan[2].min_off = (i & 0x80) != 0;
+		if (data->type != emc6d103s) {
+			i = lm85_read_value(client, LM85_REG_AFAN_SPIKE1);
+			data->autofan[0].min_off = (i & 0x20) != 0;
+			data->autofan[1].min_off = (i & 0x40) != 0;
+			data->autofan[2].min_off = (i & 0x80) != 0;
 
-		i = lm85_read_value(client, LM85_REG_AFAN_HYST1);
-		data->zone[0].hyst = i >> 4;
-		data->zone[1].hyst = i & 0x0f;
+			i = lm85_read_value(client, LM85_REG_AFAN_HYST1);
+			data->zone[0].hyst = i >> 4;
+			data->zone[1].hyst = i & 0x0f;
 
-		i = lm85_read_value(client, LM85_REG_AFAN_HYST2);
-		data->zone[2].hyst = i >> 4;
+			i = lm85_read_value(client, LM85_REG_AFAN_HYST2);
+			data->zone[2].hyst = i >> 4;
+		}
 
 		data->last_config = jiffies;
 	}  /* last_config */
diff --git a/drivers/hwmon/ltc4151.c b/drivers/hwmon/ltc4151.c
new file mode 100644
index 000000000000..4ac06b75aa60
--- /dev/null
+++ b/drivers/hwmon/ltc4151.c
@@ -0,0 +1,256 @@
+/*
+ * Driver for Linear Technology LTC4151 High Voltage I2C Current
+ * and Voltage Monitor
+ *
+ * Copyright (C) 2011 AppearTV AS
+ *
+ * Derived from:
+ *
+ *  Driver for Linear Technology LTC4261 I2C Negative Voltage Hot
+ *  Swap Controller
+ *  Copyright (C) 2010 Ericsson AB.
+ *
+ * Datasheet: http://www.linear.com/docs/Datasheet/4151fc.pdf
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+
+/* chip registers */
+#define LTC4151_SENSE_H	0x00
+#define LTC4151_SENSE_L	0x01
+#define LTC4151_VIN_H	0x02
+#define LTC4151_VIN_L	0x03
+#define LTC4151_ADIN_H	0x04
+#define LTC4151_ADIN_L	0x05
+
+struct ltc4151_data {
+	struct device *hwmon_dev;
+
+	struct mutex update_lock;
+	bool valid;
+	unsigned long last_updated; /* in jiffies */
+
+	/* Registers */
+	u8 regs[6];
+};
+
+static struct ltc4151_data *ltc4151_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct ltc4151_data *data = i2c_get_clientdata(client);
+	struct ltc4151_data *ret = data;
+
+	mutex_lock(&data->update_lock);
+
+	/*
+	 * The chip's A/D updates 6 times per second
+	 * (Conversion Rate 6 - 9 Hz)
+	 */
+	if (time_after(jiffies, data->last_updated + HZ / 6) || !data->valid) {
+		int i;
+
+		dev_dbg(&client->dev, "Starting ltc4151 update\n");
+
+		/* Read all registers */
+		for (i = 0; i < ARRAY_SIZE(data->regs); i++) {
+			int val;
+
+			val = i2c_smbus_read_byte_data(client, i);
+			if (unlikely(val < 0)) {
+				dev_dbg(dev,
+					"Failed to read ADC value: error %d\n",
+					val);
+				ret = ERR_PTR(val);
+				goto abort;
+			}
+			data->regs[i] = val;
+		}
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+abort:
+	mutex_unlock(&data->update_lock);
+	return ret;
+}
+
+/* Return the voltage from the given register in mV */
+static int ltc4151_get_value(struct ltc4151_data *data, u8 reg)
+{
+	u32 val;
+
+	val = (data->regs[reg] << 4) + (data->regs[reg + 1] >> 4);
+
+	switch (reg) {
+	case LTC4151_ADIN_H:
+		/* 500uV resolution. Convert to mV. */
+		val = val * 500 / 1000;
+		break;
+	case LTC4151_SENSE_H:
+		/*
+		 * 20uV resolution. Convert to current as measured with
+		 * an 1 mOhm sense resistor, in mA.
+		 */
+		val = val * 20;
+		break;
+	case LTC4151_VIN_H:
+		/* 25 mV per increment */
+		val = val * 25;
+		break;
+	default:
+		/* If we get here, the developer messed up */
+		WARN_ON_ONCE(1);
+		val = 0;
+		break;
+	}
+
+	return val;
+}
+
+static ssize_t ltc4151_show_value(struct device *dev,
+				  struct device_attribute *da, char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+	struct ltc4151_data *data = ltc4151_update_device(dev);
+	int value;
+
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+
+	value = ltc4151_get_value(data, attr->index);
+	return snprintf(buf, PAGE_SIZE, "%d\n", value);
+}
+
+/*
+ * Input voltages.
+ */
+static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, \
+	ltc4151_show_value, NULL, LTC4151_VIN_H);
+static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, \
+	ltc4151_show_value, NULL, LTC4151_ADIN_H);
+
+/* Currents (via sense resistor) */
+static SENSOR_DEVICE_ATTR(curr1_input, S_IRUGO, \
+	ltc4151_show_value, NULL, LTC4151_SENSE_H);
+
+/* Finally, construct an array of pointers to members of the above objects,
+ * as required for sysfs_create_group()
+ */
+static struct attribute *ltc4151_attributes[] = {
+	&sensor_dev_attr_in1_input.dev_attr.attr,
+	&sensor_dev_attr_in2_input.dev_attr.attr,
+
+	&sensor_dev_attr_curr1_input.dev_attr.attr,
+
+	NULL,
+};
+
+static const struct attribute_group ltc4151_group = {
+	.attrs = ltc4151_attributes,
+};
+
+static int ltc4151_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct i2c_adapter *adapter = client->adapter;
+	struct ltc4151_data *data;
+	int ret;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -ENODEV;
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data) {
+		ret = -ENOMEM;
+		goto out_kzalloc;
+	}
+
+	i2c_set_clientdata(client, data);
+	mutex_init(&data->update_lock);
+
+	/* Register sysfs hooks */
+	ret = sysfs_create_group(&client->dev.kobj, &ltc4151_group);
+	if (ret)
+		goto out_sysfs_create_group;
+
+	data->hwmon_dev = hwmon_device_register(&client->dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		ret = PTR_ERR(data->hwmon_dev);
+		goto out_hwmon_device_register;
+	}
+
+	return 0;
+
+out_hwmon_device_register:
+	sysfs_remove_group(&client->dev.kobj, &ltc4151_group);
+out_sysfs_create_group:
+	kfree(data);
+out_kzalloc:
+	return ret;
+}
+
+static int ltc4151_remove(struct i2c_client *client)
+{
+	struct ltc4151_data *data = i2c_get_clientdata(client);
+
+	hwmon_device_unregister(data->hwmon_dev);
+	sysfs_remove_group(&client->dev.kobj, &ltc4151_group);
+
+	kfree(data);
+
+	return 0;
+}
+
+static const struct i2c_device_id ltc4151_id[] = {
+	{ "ltc4151", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ltc4151_id);
+
+/* This is the driver that will be inserted */
+static struct i2c_driver ltc4151_driver = {
+	.driver = {
+		.name	= "ltc4151",
+	},
+	.probe		= ltc4151_probe,
+	.remove		= ltc4151_remove,
+	.id_table	= ltc4151_id,
+};
+
+static int __init ltc4151_init(void)
+{
+	return i2c_add_driver(&ltc4151_driver);
+}
+
+static void __exit ltc4151_exit(void)
+{
+	i2c_del_driver(&ltc4151_driver);
+}
+
+MODULE_AUTHOR("Per Dalen <per.dalen@appeartv.com>");
+MODULE_DESCRIPTION("LTC4151 driver");
+MODULE_LICENSE("GPL");
+
+module_init(ltc4151_init);
+module_exit(ltc4151_exit);
diff --git a/drivers/hwmon/max16064.c b/drivers/hwmon/max16064.c
new file mode 100644
index 000000000000..1d6d717060d3
--- /dev/null
+++ b/drivers/hwmon/max16064.c
@@ -0,0 +1,91 @@
+/*
+ * Hardware monitoring driver for Maxim MAX16064
+ *
+ * Copyright (c) 2011 Ericsson AB.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include "pmbus.h"
+
+static struct pmbus_driver_info max16064_info = {
+	.pages = 4,
+	.direct[PSC_VOLTAGE_IN] = true,
+	.direct[PSC_VOLTAGE_OUT] = true,
+	.direct[PSC_TEMPERATURE] = true,
+	.m[PSC_VOLTAGE_IN] = 19995,
+	.b[PSC_VOLTAGE_IN] = 0,
+	.R[PSC_VOLTAGE_IN] = -1,
+	.m[PSC_VOLTAGE_OUT] = 19995,
+	.b[PSC_VOLTAGE_OUT] = 0,
+	.R[PSC_VOLTAGE_OUT] = -1,
+	.m[PSC_TEMPERATURE] = -7612,
+	.b[PSC_TEMPERATURE] = 335,
+	.R[PSC_TEMPERATURE] = -3,
+	.func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_TEMP
+		| PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_TEMP,
+	.func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+	.func[2] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+	.func[3] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+};
+
+static int max16064_probe(struct i2c_client *client,
+			  const struct i2c_device_id *id)
+{
+	return pmbus_do_probe(client, id, &max16064_info);
+}
+
+static int max16064_remove(struct i2c_client *client)
+{
+	return pmbus_do_remove(client);
+}
+
+static const struct i2c_device_id max16064_id[] = {
+	{"max16064", 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, max16064_id);
+
+/* This is the driver that will be inserted */
+static struct i2c_driver max16064_driver = {
+	.driver = {
+		   .name = "max16064",
+		   },
+	.probe = max16064_probe,
+	.remove = max16064_remove,
+	.id_table = max16064_id,
+};
+
+static int __init max16064_init(void)
+{
+	return i2c_add_driver(&max16064_driver);
+}
+
+static void __exit max16064_exit(void)
+{
+	i2c_del_driver(&max16064_driver);
+}
+
+MODULE_AUTHOR("Guenter Roeck");
+MODULE_DESCRIPTION("PMBus driver for Maxim MAX16064");
+MODULE_LICENSE("GPL");
+module_init(max16064_init);
+module_exit(max16064_exit);
diff --git a/drivers/hwmon/max34440.c b/drivers/hwmon/max34440.c
new file mode 100644
index 000000000000..992b701b4c5e
--- /dev/null
+++ b/drivers/hwmon/max34440.c
@@ -0,0 +1,199 @@
+/*
+ * Hardware monitoring driver for Maxim MAX34440/MAX34441
+ *
+ * Copyright (c) 2011 Ericsson AB.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include "pmbus.h"
+
+enum chips { max34440, max34441 };
+
+#define MAX34440_STATUS_OC_WARN		(1 << 0)
+#define MAX34440_STATUS_OC_FAULT	(1 << 1)
+#define MAX34440_STATUS_OT_FAULT	(1 << 5)
+#define MAX34440_STATUS_OT_WARN		(1 << 6)
+
+static int max34440_get_status(struct i2c_client *client, int page, int reg)
+{
+	int ret;
+	int mfg_status;
+
+	ret = pmbus_set_page(client, page);
+	if (ret < 0)
+		return ret;
+
+	switch (reg) {
+	case PMBUS_STATUS_IOUT:
+		mfg_status = pmbus_read_word_data(client, 0,
+						  PMBUS_STATUS_MFR_SPECIFIC);
+		if (mfg_status < 0)
+			return mfg_status;
+		if (mfg_status & MAX34440_STATUS_OC_WARN)
+			ret |= PB_IOUT_OC_WARNING;
+		if (mfg_status & MAX34440_STATUS_OC_FAULT)
+			ret |= PB_IOUT_OC_FAULT;
+		break;
+	case PMBUS_STATUS_TEMPERATURE:
+		mfg_status = pmbus_read_word_data(client, 0,
+						  PMBUS_STATUS_MFR_SPECIFIC);
+		if (mfg_status < 0)
+			return mfg_status;
+		if (mfg_status & MAX34440_STATUS_OT_WARN)
+			ret |= PB_TEMP_OT_WARNING;
+		if (mfg_status & MAX34440_STATUS_OT_FAULT)
+			ret |= PB_TEMP_OT_FAULT;
+		break;
+	default:
+		ret = -ENODATA;
+		break;
+	}
+	return ret;
+}
+
+static struct pmbus_driver_info max34440_info[] = {
+	[max34440] = {
+		.pages = 14,
+		.direct[PSC_VOLTAGE_IN] = true,
+		.direct[PSC_VOLTAGE_OUT] = true,
+		.direct[PSC_TEMPERATURE] = true,
+		.direct[PSC_CURRENT_OUT] = true,
+		.m[PSC_VOLTAGE_IN] = 1,
+		.b[PSC_VOLTAGE_IN] = 0,
+		.R[PSC_VOLTAGE_IN] = 3,	    /* R = 0 in datasheet reflects mV */
+		.m[PSC_VOLTAGE_OUT] = 1,
+		.b[PSC_VOLTAGE_OUT] = 0,
+		.R[PSC_VOLTAGE_OUT] = 3,    /* R = 0 in datasheet reflects mV */
+		.m[PSC_CURRENT_OUT] = 1,
+		.b[PSC_CURRENT_OUT] = 0,
+		.R[PSC_CURRENT_OUT] = 3,    /* R = 0 in datasheet reflects mA */
+		.m[PSC_TEMPERATURE] = 1,
+		.b[PSC_TEMPERATURE] = 0,
+		.R[PSC_TEMPERATURE] = 2,
+		.func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+		  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+		.func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+		  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+		.func[2] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+		  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+		.func[3] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+		  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+		.func[4] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+		  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+		.func[5] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+		  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+		.func[6] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[7] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[8] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[9] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[10] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[11] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[12] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[13] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.get_status = max34440_get_status,
+	},
+	[max34441] = {
+		.pages = 12,
+		.direct[PSC_VOLTAGE_IN] = true,
+		.direct[PSC_VOLTAGE_OUT] = true,
+		.direct[PSC_TEMPERATURE] = true,
+		.direct[PSC_CURRENT_OUT] = true,
+		.direct[PSC_FAN] = true,
+		.m[PSC_VOLTAGE_IN] = 1,
+		.b[PSC_VOLTAGE_IN] = 0,
+		.R[PSC_VOLTAGE_IN] = 3,
+		.m[PSC_VOLTAGE_OUT] = 1,
+		.b[PSC_VOLTAGE_OUT] = 0,
+		.R[PSC_VOLTAGE_OUT] = 3,
+		.m[PSC_CURRENT_OUT] = 1,
+		.b[PSC_CURRENT_OUT] = 0,
+		.R[PSC_CURRENT_OUT] = 3,
+		.m[PSC_TEMPERATURE] = 1,
+		.b[PSC_TEMPERATURE] = 0,
+		.R[PSC_TEMPERATURE] = 2,
+		.m[PSC_FAN] = 1,
+		.b[PSC_FAN] = 0,
+		.R[PSC_FAN] = 0,
+		.func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+		  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+		.func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+		  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+		.func[2] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+		  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+		.func[3] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+		  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+		.func[4] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+		  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+		.func[5] = PMBUS_HAVE_FAN12 | PMBUS_HAVE_STATUS_FAN12,
+		.func[6] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[7] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[8] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[9] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[10] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[11] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.get_status = max34440_get_status,
+	},
+};
+
+static int max34440_probe(struct i2c_client *client,
+			  const struct i2c_device_id *id)
+{
+	return pmbus_do_probe(client, id, &max34440_info[id->driver_data]);
+}
+
+static int max34440_remove(struct i2c_client *client)
+{
+	return pmbus_do_remove(client);
+}
+
+static const struct i2c_device_id max34440_id[] = {
+	{"max34440", max34440},
+	{"max34441", max34441},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, max34440_id);
+
+/* This is the driver that will be inserted */
+static struct i2c_driver max34440_driver = {
+	.driver = {
+		   .name = "max34440",
+		   },
+	.probe = max34440_probe,
+	.remove = max34440_remove,
+	.id_table = max34440_id,
+};
+
+static int __init max34440_init(void)
+{
+	return i2c_add_driver(&max34440_driver);
+}
+
+static void __exit max34440_exit(void)
+{
+	i2c_del_driver(&max34440_driver);
+}
+
+MODULE_AUTHOR("Guenter Roeck");
+MODULE_DESCRIPTION("PMBus driver for Maxim MAX34440/MAX34441");
+MODULE_LICENSE("GPL");
+module_init(max34440_init);
+module_exit(max34440_exit);
diff --git a/drivers/hwmon/max6639.c b/drivers/hwmon/max6639.c
new file mode 100644
index 000000000000..f20d9978ee78
--- /dev/null
+++ b/drivers/hwmon/max6639.c
@@ -0,0 +1,653 @@
+/*
+ * max6639.c - Support for Maxim MAX6639
+ *
+ * 2-Channel Temperature Monitor with Dual PWM Fan-Speed Controller
+ *
+ * Copyright (C) 2010, 2011 Roland Stigge <stigge@antcom.de>
+ *
+ * based on the initial MAX6639 support from semptian.net
+ * by He Changqing <hechangqing@semptian.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/i2c/max6639.h>
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { 0x2c, 0x2e, 0x2f, I2C_CLIENT_END };
+
+/* The MAX6639 registers, valid channel numbers: 0, 1 */
+#define MAX6639_REG_TEMP(ch)			(0x00 + (ch))
+#define MAX6639_REG_STATUS			0x02
+#define MAX6639_REG_OUTPUT_MASK			0x03
+#define MAX6639_REG_GCONFIG			0x04
+#define MAX6639_REG_TEMP_EXT(ch)		(0x05 + (ch))
+#define MAX6639_REG_ALERT_LIMIT(ch)		(0x08 + (ch))
+#define MAX6639_REG_OT_LIMIT(ch)		(0x0A + (ch))
+#define MAX6639_REG_THERM_LIMIT(ch)		(0x0C + (ch))
+#define MAX6639_REG_FAN_CONFIG1(ch)		(0x10 + (ch) * 4)
+#define MAX6639_REG_FAN_CONFIG2a(ch)		(0x11 + (ch) * 4)
+#define MAX6639_REG_FAN_CONFIG2b(ch)		(0x12 + (ch) * 4)
+#define MAX6639_REG_FAN_CONFIG3(ch)		(0x13 + (ch) * 4)
+#define MAX6639_REG_FAN_CNT(ch)			(0x20 + (ch))
+#define MAX6639_REG_TARGET_CNT(ch)		(0x22 + (ch))
+#define MAX6639_REG_FAN_PPR(ch)			(0x24 + (ch))
+#define MAX6639_REG_TARGTDUTY(ch)		(0x26 + (ch))
+#define MAX6639_REG_FAN_START_TEMP(ch)		(0x28 + (ch))
+#define MAX6639_REG_DEVID			0x3D
+#define MAX6639_REG_MANUID			0x3E
+#define MAX6639_REG_DEVREV			0x3F
+
+/* Register bits */
+#define MAX6639_GCONFIG_STANDBY			0x80
+#define MAX6639_GCONFIG_POR			0x40
+#define MAX6639_GCONFIG_DISABLE_TIMEOUT		0x20
+#define MAX6639_GCONFIG_CH2_LOCAL		0x10
+#define MAX6639_GCONFIG_PWM_FREQ_HI		0x08
+
+#define MAX6639_FAN_CONFIG1_PWM			0x80
+
+#define MAX6639_FAN_CONFIG3_THERM_FULL_SPEED	0x40
+
+static const int rpm_ranges[] = { 2000, 4000, 8000, 16000 };
+
+#define FAN_FROM_REG(val, div, rpm_range)	((val) == 0 ? -1 : \
+	(val) == 255 ? 0 : (rpm_ranges[rpm_range] * 30) / ((div + 1) * (val)))
+#define TEMP_LIMIT_TO_REG(val)	SENSORS_LIMIT((val) / 1000, 0, 255)
+
+/*
+ * Client data (each client gets its own)
+ */
+struct max6639_data {
+	struct device *hwmon_dev;
+	struct mutex update_lock;
+	char valid;		/* !=0 if following fields are valid */
+	unsigned long last_updated;	/* In jiffies */
+
+	/* Register values sampled regularly */
+	u16 temp[2];		/* Temperature, in 1/8 C, 0..255 C */
+	bool temp_fault[2];	/* Detected temperature diode failure */
+	u8 fan[2];		/* Register value: TACH count for fans >=30 */
+	u8 status;		/* Detected channel alarms and fan failures */
+
+	/* Register values only written to */
+	u8 pwm[2];		/* Register value: Duty cycle 0..120 */
+	u8 temp_therm[2];	/* THERM Temperature, 0..255 C (->_max) */
+	u8 temp_alert[2];	/* ALERT Temperature, 0..255 C (->_crit) */
+	u8 temp_ot[2];		/* OT Temperature, 0..255 C (->_emergency) */
+
+	/* Register values initialized only once */
+	u8 ppr;			/* Pulses per rotation 0..3 for 1..4 ppr */
+	u8 rpm_range;		/* Index in above rpm_ranges table */
+};
+
+static struct max6639_data *max6639_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct max6639_data *data = i2c_get_clientdata(client);
+	struct max6639_data *ret = data;
+	int i;
+	int status_reg;
+
+	mutex_lock(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) {
+		int res;
+
+		dev_dbg(&client->dev, "Starting max6639 update\n");
+
+		status_reg = i2c_smbus_read_byte_data(client,
+						      MAX6639_REG_STATUS);
+		if (status_reg < 0) {
+			ret = ERR_PTR(status_reg);
+			goto abort;
+		}
+
+		data->status = status_reg;
+
+		for (i = 0; i < 2; i++) {
+			res = i2c_smbus_read_byte_data(client,
+					MAX6639_REG_FAN_CNT(i));
+			if (res < 0) {
+				ret = ERR_PTR(res);
+				goto abort;
+			}
+			data->fan[i] = res;
+
+			res = i2c_smbus_read_byte_data(client,
+					MAX6639_REG_TEMP_EXT(i));
+			if (res < 0) {
+				ret = ERR_PTR(res);
+				goto abort;
+			}
+			data->temp[i] = res >> 5;
+			data->temp_fault[i] = res & 0x01;
+
+			res = i2c_smbus_read_byte_data(client,
+					MAX6639_REG_TEMP(i));
+			if (res < 0) {
+				ret = ERR_PTR(res);
+				goto abort;
+			}
+			data->temp[i] |= res << 3;
+		}
+
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+abort:
+	mutex_unlock(&data->update_lock);
+
+	return ret;
+}
+
+static ssize_t show_temp_input(struct device *dev,
+			       struct device_attribute *dev_attr, char *buf)
+{
+	long temp;
+	struct max6639_data *data = max6639_update_device(dev);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
+
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+
+	temp = data->temp[attr->index] * 125;
+	return sprintf(buf, "%ld\n", temp);
+}
+
+static ssize_t show_temp_fault(struct device *dev,
+			       struct device_attribute *dev_attr, char *buf)
+{
+	struct max6639_data *data = max6639_update_device(dev);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
+
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+
+	return sprintf(buf, "%d\n", data->temp_fault[attr->index]);
+}
+
+static ssize_t show_temp_max(struct device *dev,
+			     struct device_attribute *dev_attr, char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct max6639_data *data = i2c_get_clientdata(client);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
+
+	return sprintf(buf, "%d\n", (data->temp_therm[attr->index] * 1000));
+}
+
+static ssize_t set_temp_max(struct device *dev,
+			    struct device_attribute *dev_attr,
+			    const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct max6639_data *data = i2c_get_clientdata(client);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
+	unsigned long val;
+	int res;
+
+	res = strict_strtoul(buf, 10, &val);
+	if (res)
+		return res;
+
+	mutex_lock(&data->update_lock);
+	data->temp_therm[attr->index] = TEMP_LIMIT_TO_REG(val);
+	i2c_smbus_write_byte_data(client,
+				  MAX6639_REG_THERM_LIMIT(attr->index),
+				  data->temp_therm[attr->index]);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_temp_crit(struct device *dev,
+			      struct device_attribute *dev_attr, char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct max6639_data *data = i2c_get_clientdata(client);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
+
+	return sprintf(buf, "%d\n", (data->temp_alert[attr->index] * 1000));
+}
+
+static ssize_t set_temp_crit(struct device *dev,
+			     struct device_attribute *dev_attr,
+			     const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct max6639_data *data = i2c_get_clientdata(client);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
+	unsigned long val;
+	int res;
+
+	res = strict_strtoul(buf, 10, &val);
+	if (res)
+		return res;
+
+	mutex_lock(&data->update_lock);
+	data->temp_alert[attr->index] = TEMP_LIMIT_TO_REG(val);
+	i2c_smbus_write_byte_data(client,
+				  MAX6639_REG_ALERT_LIMIT(attr->index),
+				  data->temp_alert[attr->index]);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_temp_emergency(struct device *dev,
+				   struct device_attribute *dev_attr,
+				   char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct max6639_data *data = i2c_get_clientdata(client);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
+
+	return sprintf(buf, "%d\n", (data->temp_ot[attr->index] * 1000));
+}
+
+static ssize_t set_temp_emergency(struct device *dev,
+				  struct device_attribute *dev_attr,
+				  const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct max6639_data *data = i2c_get_clientdata(client);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
+	unsigned long val;
+	int res;
+
+	res = strict_strtoul(buf, 10, &val);
+	if (res)
+		return res;
+
+	mutex_lock(&data->update_lock);
+	data->temp_ot[attr->index] = TEMP_LIMIT_TO_REG(val);
+	i2c_smbus_write_byte_data(client,
+				  MAX6639_REG_OT_LIMIT(attr->index),
+				  data->temp_ot[attr->index]);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_pwm(struct device *dev,
+			struct device_attribute *dev_attr, char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct max6639_data *data = i2c_get_clientdata(client);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
+
+	return sprintf(buf, "%d\n", data->pwm[attr->index] * 255 / 120);
+}
+
+static ssize_t set_pwm(struct device *dev,
+		       struct device_attribute *dev_attr,
+		       const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct max6639_data *data = i2c_get_clientdata(client);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
+	unsigned long val;
+	int res;
+
+	res = strict_strtoul(buf, 10, &val);
+	if (res)
+		return res;
+
+	val = SENSORS_LIMIT(val, 0, 255);
+
+	mutex_lock(&data->update_lock);
+	data->pwm[attr->index] = (u8)(val * 120 / 255);
+	i2c_smbus_write_byte_data(client,
+				  MAX6639_REG_TARGTDUTY(attr->index),
+				  data->pwm[attr->index]);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static ssize_t show_fan_input(struct device *dev,
+			      struct device_attribute *dev_attr, char *buf)
+{
+	struct max6639_data *data = max6639_update_device(dev);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
+
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+
+	return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[attr->index],
+		       data->ppr, data->rpm_range));
+}
+
+static ssize_t show_alarm(struct device *dev,
+			  struct device_attribute *dev_attr, char *buf)
+{
+	struct max6639_data *data = max6639_update_device(dev);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
+
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+
+	return sprintf(buf, "%d\n", !!(data->status & (1 << attr->index)));
+}
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp_input, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp1_fault, S_IRUGO, show_temp_fault, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_temp_fault, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max,
+		set_temp_max, 0);
+static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp_max,
+		set_temp_max, 1);
+static SENSOR_DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO, show_temp_crit,
+		set_temp_crit, 0);
+static SENSOR_DEVICE_ATTR(temp2_crit, S_IWUSR | S_IRUGO, show_temp_crit,
+		set_temp_crit, 1);
+static SENSOR_DEVICE_ATTR(temp1_emergency, S_IWUSR | S_IRUGO,
+		show_temp_emergency, set_temp_emergency, 0);
+static SENSOR_DEVICE_ATTR(temp2_emergency, S_IWUSR | S_IRUGO,
+		show_temp_emergency, set_temp_emergency, 1);
+static SENSOR_DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 0);
+static SENSOR_DEVICE_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 1);
+static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan_input, NULL, 0);
+static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan_input, NULL, 1);
+static SENSOR_DEVICE_ATTR(fan1_fault, S_IRUGO, show_alarm, NULL, 1);
+static SENSOR_DEVICE_ATTR(fan2_fault, S_IRUGO, show_alarm, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, 3);
+static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO, show_alarm, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL, 7);
+static SENSOR_DEVICE_ATTR(temp2_crit_alarm, S_IRUGO, show_alarm, NULL, 6);
+static SENSOR_DEVICE_ATTR(temp1_emergency_alarm, S_IRUGO, show_alarm, NULL, 5);
+static SENSOR_DEVICE_ATTR(temp2_emergency_alarm, S_IRUGO, show_alarm, NULL, 4);
+
+
+static struct attribute *max6639_attributes[] = {
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	&sensor_dev_attr_temp2_input.dev_attr.attr,
+	&sensor_dev_attr_temp1_fault.dev_attr.attr,
+	&sensor_dev_attr_temp2_fault.dev_attr.attr,
+	&sensor_dev_attr_temp1_max.dev_attr.attr,
+	&sensor_dev_attr_temp2_max.dev_attr.attr,
+	&sensor_dev_attr_temp1_crit.dev_attr.attr,
+	&sensor_dev_attr_temp2_crit.dev_attr.attr,
+	&sensor_dev_attr_temp1_emergency.dev_attr.attr,
+	&sensor_dev_attr_temp2_emergency.dev_attr.attr,
+	&sensor_dev_attr_pwm1.dev_attr.attr,
+	&sensor_dev_attr_pwm2.dev_attr.attr,
+	&sensor_dev_attr_fan1_input.dev_attr.attr,
+	&sensor_dev_attr_fan2_input.dev_attr.attr,
+	&sensor_dev_attr_fan1_fault.dev_attr.attr,
+	&sensor_dev_attr_fan2_fault.dev_attr.attr,
+	&sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp2_crit_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp1_emergency_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp2_emergency_alarm.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group max6639_group = {
+	.attrs = max6639_attributes,
+};
+
+/*
+ *  returns respective index in rpm_ranges table
+ *  1 by default on invalid range
+ */
+static int rpm_range_to_reg(int range)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(rpm_ranges); i++) {
+		if (rpm_ranges[i] == range)
+			return i;
+	}
+
+	return 1; /* default: 4000 RPM */
+}
+
+static int max6639_init_client(struct i2c_client *client)
+{
+	struct max6639_data *data = i2c_get_clientdata(client);
+	struct max6639_platform_data *max6639_info =
+		client->dev.platform_data;
+	int i = 0;
+	int rpm_range = 1; /* default: 4000 RPM */
+	int err = 0;
+
+	/* Reset chip to default values, see below for GCONFIG setup */
+	err = i2c_smbus_write_byte_data(client, MAX6639_REG_GCONFIG,
+				  MAX6639_GCONFIG_POR);
+	if (err)
+		goto exit;
+
+	/* Fans pulse per revolution is 2 by default */
+	if (max6639_info && max6639_info->ppr > 0 &&
+			max6639_info->ppr < 5)
+		data->ppr = max6639_info->ppr;
+	else
+		data->ppr = 2;
+	data->ppr -= 1;
+	err = i2c_smbus_write_byte_data(client,
+			MAX6639_REG_FAN_PPR(i),
+			data->ppr << 5);
+	if (err)
+		goto exit;
+
+	if (max6639_info)
+		rpm_range = rpm_range_to_reg(max6639_info->rpm_range);
+	data->rpm_range = rpm_range;
+
+	for (i = 0; i < 2; i++) {
+
+		/* Fans config PWM, RPM */
+		err = i2c_smbus_write_byte_data(client,
+			MAX6639_REG_FAN_CONFIG1(i),
+			MAX6639_FAN_CONFIG1_PWM | rpm_range);
+		if (err)
+			goto exit;
+
+		/* Fans PWM polarity high by default */
+		if (max6639_info && max6639_info->pwm_polarity == 0)
+			err = i2c_smbus_write_byte_data(client,
+				MAX6639_REG_FAN_CONFIG2a(i), 0x00);
+		else
+			err = i2c_smbus_write_byte_data(client,
+				MAX6639_REG_FAN_CONFIG2a(i), 0x02);
+		if (err)
+			goto exit;
+
+		/*
+		 * /THERM full speed enable,
+		 * PWM frequency 25kHz, see also GCONFIG below
+		 */
+		err = i2c_smbus_write_byte_data(client,
+			MAX6639_REG_FAN_CONFIG3(i),
+			MAX6639_FAN_CONFIG3_THERM_FULL_SPEED | 0x03);
+		if (err)
+			goto exit;
+
+		/* Max. temp. 80C/90C/100C */
+		data->temp_therm[i] = 80;
+		data->temp_alert[i] = 90;
+		data->temp_ot[i] = 100;
+		err = i2c_smbus_write_byte_data(client,
+				MAX6639_REG_THERM_LIMIT(i),
+				data->temp_therm[i]);
+		if (err)
+			goto exit;
+		err = i2c_smbus_write_byte_data(client,
+				MAX6639_REG_ALERT_LIMIT(i),
+				data->temp_alert[i]);
+		if (err)
+			goto exit;
+		err = i2c_smbus_write_byte_data(client,
+				MAX6639_REG_OT_LIMIT(i), data->temp_ot[i]);
+		if (err)
+			goto exit;
+
+		/* PWM 120/120 (i.e. 100%) */
+		data->pwm[i] = 120;
+		err = i2c_smbus_write_byte_data(client,
+				MAX6639_REG_TARGTDUTY(i), data->pwm[i]);
+		if (err)
+			goto exit;
+	}
+	/* Start monitoring */
+	err = i2c_smbus_write_byte_data(client, MAX6639_REG_GCONFIG,
+		MAX6639_GCONFIG_DISABLE_TIMEOUT | MAX6639_GCONFIG_CH2_LOCAL |
+		MAX6639_GCONFIG_PWM_FREQ_HI);
+exit:
+	return err;
+}
+
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int max6639_detect(struct i2c_client *client,
+			  struct i2c_board_info *info)
+{
+	struct i2c_adapter *adapter = client->adapter;
+	int dev_id, manu_id;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -ENODEV;
+
+	/* Actual detection via device and manufacturer ID */
+	dev_id = i2c_smbus_read_byte_data(client, MAX6639_REG_DEVID);
+	manu_id = i2c_smbus_read_byte_data(client, MAX6639_REG_MANUID);
+	if (dev_id != 0x58 || manu_id != 0x4D)
+		return -ENODEV;
+
+	strlcpy(info->type, "max6639", I2C_NAME_SIZE);
+
+	return 0;
+}
+
+static int max6639_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct max6639_data *data;
+	int err;
+
+	data = kzalloc(sizeof(struct max6639_data), GFP_KERNEL);
+	if (!data) {
+		err = -ENOMEM;
+		goto exit;
+	}
+
+	i2c_set_clientdata(client, data);
+	mutex_init(&data->update_lock);
+
+	/* Initialize the max6639 chip */
+	err = max6639_init_client(client);
+	if (err < 0)
+		goto error_free;
+
+	/* Register sysfs hooks */
+	err = sysfs_create_group(&client->dev.kobj, &max6639_group);
+	if (err)
+		goto error_free;
+
+	data->hwmon_dev = hwmon_device_register(&client->dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		err = PTR_ERR(data->hwmon_dev);
+		goto error_remove;
+	}
+
+	dev_info(&client->dev, "temperature sensor and fan control found\n");
+
+	return 0;
+
+error_remove:
+	sysfs_remove_group(&client->dev.kobj, &max6639_group);
+error_free:
+	kfree(data);
+exit:
+	return err;
+}
+
+static int max6639_remove(struct i2c_client *client)
+{
+	struct max6639_data *data = i2c_get_clientdata(client);
+
+	hwmon_device_unregister(data->hwmon_dev);
+	sysfs_remove_group(&client->dev.kobj, &max6639_group);
+
+	kfree(data);
+	return 0;
+}
+
+static int max6639_suspend(struct i2c_client *client, pm_message_t mesg)
+{
+	int data = i2c_smbus_read_byte_data(client, MAX6639_REG_GCONFIG);
+	if (data < 0)
+		return data;
+
+	return i2c_smbus_write_byte_data(client,
+			MAX6639_REG_GCONFIG, data | MAX6639_GCONFIG_STANDBY);
+}
+
+static int max6639_resume(struct i2c_client *client)
+{
+	int data = i2c_smbus_read_byte_data(client, MAX6639_REG_GCONFIG);
+	if (data < 0)
+		return data;
+
+	return i2c_smbus_write_byte_data(client,
+			MAX6639_REG_GCONFIG, data & ~MAX6639_GCONFIG_STANDBY);
+}
+
+static const struct i2c_device_id max6639_id[] = {
+	{"max6639", 0},
+	{ }
+};
+
+MODULE_DEVICE_TABLE(i2c, max6639_id);
+
+static struct i2c_driver max6639_driver = {
+	.class = I2C_CLASS_HWMON,
+	.driver = {
+		   .name = "max6639",
+		   },
+	.probe = max6639_probe,
+	.remove = max6639_remove,
+	.suspend = max6639_suspend,
+	.resume = max6639_resume,
+	.id_table = max6639_id,
+	.detect = max6639_detect,
+	.address_list = normal_i2c,
+};
+
+static int __init max6639_init(void)
+{
+	return i2c_add_driver(&max6639_driver);
+}
+
+static void __exit max6639_exit(void)
+{
+	i2c_del_driver(&max6639_driver);
+}
+
+MODULE_AUTHOR("Roland Stigge <stigge@antcom.de>");
+MODULE_DESCRIPTION("max6639 driver");
+MODULE_LICENSE("GPL");
+
+module_init(max6639_init);
+module_exit(max6639_exit);
diff --git a/drivers/hwmon/max8688.c b/drivers/hwmon/max8688.c
new file mode 100644
index 000000000000..8ebfef2ecf26
--- /dev/null
+++ b/drivers/hwmon/max8688.c
@@ -0,0 +1,158 @@
+/*
+ * Hardware monitoring driver for Maxim MAX8688
+ *
+ * Copyright (c) 2011 Ericsson AB.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include "pmbus.h"
+
+#define MAX8688_MFG_STATUS		0xd8
+
+#define MAX8688_STATUS_OC_FAULT		(1 << 4)
+#define MAX8688_STATUS_OV_FAULT		(1 << 5)
+#define MAX8688_STATUS_OV_WARNING	(1 << 8)
+#define MAX8688_STATUS_UV_FAULT		(1 << 9)
+#define MAX8688_STATUS_UV_WARNING	(1 << 10)
+#define MAX8688_STATUS_UC_FAULT		(1 << 11)
+#define MAX8688_STATUS_OC_WARNING	(1 << 12)
+#define MAX8688_STATUS_OT_FAULT		(1 << 13)
+#define MAX8688_STATUS_OT_WARNING	(1 << 14)
+
+static int max8688_get_status(struct i2c_client *client, int page, int reg)
+{
+	int ret = 0;
+	int mfg_status;
+
+	if (page)
+		return -EINVAL;
+
+	switch (reg) {
+	case PMBUS_STATUS_VOUT:
+		mfg_status = pmbus_read_word_data(client, 0,
+						  MAX8688_MFG_STATUS);
+		if (mfg_status < 0)
+			return mfg_status;
+		if (mfg_status & MAX8688_STATUS_UV_WARNING)
+			ret |= PB_VOLTAGE_UV_WARNING;
+		if (mfg_status & MAX8688_STATUS_UV_FAULT)
+			ret |= PB_VOLTAGE_UV_FAULT;
+		if (mfg_status & MAX8688_STATUS_OV_WARNING)
+			ret |= PB_VOLTAGE_OV_WARNING;
+		if (mfg_status & MAX8688_STATUS_OV_FAULT)
+			ret |= PB_VOLTAGE_OV_FAULT;
+		break;
+	case PMBUS_STATUS_IOUT:
+		mfg_status = pmbus_read_word_data(client, 0,
+						  MAX8688_MFG_STATUS);
+		if (mfg_status < 0)
+			return mfg_status;
+		if (mfg_status & MAX8688_STATUS_UC_FAULT)
+			ret |= PB_IOUT_UC_FAULT;
+		if (mfg_status & MAX8688_STATUS_OC_WARNING)
+			ret |= PB_IOUT_OC_WARNING;
+		if (mfg_status & MAX8688_STATUS_OC_FAULT)
+			ret |= PB_IOUT_OC_FAULT;
+		break;
+	case PMBUS_STATUS_TEMPERATURE:
+		mfg_status = pmbus_read_word_data(client, 0,
+						  MAX8688_MFG_STATUS);
+		if (mfg_status < 0)
+			return mfg_status;
+		if (mfg_status & MAX8688_STATUS_OT_WARNING)
+			ret |= PB_TEMP_OT_WARNING;
+		if (mfg_status & MAX8688_STATUS_OT_FAULT)
+			ret |= PB_TEMP_OT_FAULT;
+		break;
+	default:
+		ret = -ENODATA;
+		break;
+	}
+	return ret;
+}
+
+static struct pmbus_driver_info max8688_info = {
+	.pages = 1,
+	.direct[PSC_VOLTAGE_IN] = true,
+	.direct[PSC_VOLTAGE_OUT] = true,
+	.direct[PSC_TEMPERATURE] = true,
+	.direct[PSC_CURRENT_OUT] = true,
+	.m[PSC_VOLTAGE_IN] = 19995,
+	.b[PSC_VOLTAGE_IN] = 0,
+	.R[PSC_VOLTAGE_IN] = -1,
+	.m[PSC_VOLTAGE_OUT] = 19995,
+	.b[PSC_VOLTAGE_OUT] = 0,
+	.R[PSC_VOLTAGE_OUT] = -1,
+	.m[PSC_CURRENT_OUT] = 23109,
+	.b[PSC_CURRENT_OUT] = 0,
+	.R[PSC_CURRENT_OUT] = -2,
+	.m[PSC_TEMPERATURE] = -7612,
+	.b[PSC_TEMPERATURE] = 335,
+	.R[PSC_TEMPERATURE] = -3,
+	.func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT | PMBUS_HAVE_TEMP
+		| PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT
+		| PMBUS_HAVE_STATUS_TEMP,
+	.get_status = max8688_get_status,
+};
+
+static int max8688_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	return pmbus_do_probe(client, id, &max8688_info);
+}
+
+static int max8688_remove(struct i2c_client *client)
+{
+	return pmbus_do_remove(client);
+}
+
+static const struct i2c_device_id max8688_id[] = {
+	{"max8688", 0},
+	{ }
+};
+
+MODULE_DEVICE_TABLE(i2c, max8688_id);
+
+/* This is the driver that will be inserted */
+static struct i2c_driver max8688_driver = {
+	.driver = {
+		   .name = "max8688",
+		   },
+	.probe = max8688_probe,
+	.remove = max8688_remove,
+	.id_table = max8688_id,
+};
+
+static int __init max8688_init(void)
+{
+	return i2c_add_driver(&max8688_driver);
+}
+
+static void __exit max8688_exit(void)
+{
+	i2c_del_driver(&max8688_driver);
+}
+
+MODULE_AUTHOR("Guenter Roeck");
+MODULE_DESCRIPTION("PMBus driver for Maxim MAX8688");
+MODULE_LICENSE("GPL");
+module_init(max8688_init);
+module_exit(max8688_exit);
diff --git a/drivers/hwmon/pmbus.c b/drivers/hwmon/pmbus.c
new file mode 100644
index 000000000000..98e2e28899e2
--- /dev/null
+++ b/drivers/hwmon/pmbus.c
@@ -0,0 +1,203 @@
+/*
+ * Hardware monitoring driver for PMBus devices
+ *
+ * Copyright (c) 2010, 2011 Ericsson AB.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/mutex.h>
+#include <linux/i2c.h>
+#include "pmbus.h"
+
+/*
+ * Find sensor groups and status registers on each page.
+ */
+static void pmbus_find_sensor_groups(struct i2c_client *client,
+				     struct pmbus_driver_info *info)
+{
+	int page;
+
+	/* Sensors detected on page 0 only */
+	if (pmbus_check_word_register(client, 0, PMBUS_READ_VIN))
+		info->func[0] |= PMBUS_HAVE_VIN;
+	if (pmbus_check_word_register(client, 0, PMBUS_READ_VCAP))
+		info->func[0] |= PMBUS_HAVE_VCAP;
+	if (pmbus_check_word_register(client, 0, PMBUS_READ_IIN))
+		info->func[0] |= PMBUS_HAVE_IIN;
+	if (pmbus_check_word_register(client, 0, PMBUS_READ_PIN))
+		info->func[0] |= PMBUS_HAVE_PIN;
+	if (info->func[0]
+	    && pmbus_check_byte_register(client, 0, PMBUS_STATUS_INPUT))
+		info->func[0] |= PMBUS_HAVE_STATUS_INPUT;
+	if (pmbus_check_word_register(client, 0, PMBUS_READ_FAN_SPEED_1)) {
+		info->func[0] |= PMBUS_HAVE_FAN12;
+		if (pmbus_check_byte_register(client, 0, PMBUS_STATUS_FAN_12))
+			info->func[0] |= PMBUS_HAVE_STATUS_FAN12;
+	}
+	if (pmbus_check_word_register(client, 0, PMBUS_READ_FAN_SPEED_3)) {
+		info->func[0] |= PMBUS_HAVE_FAN34;
+		if (pmbus_check_byte_register(client, 0, PMBUS_STATUS_FAN_34))
+			info->func[0] |= PMBUS_HAVE_STATUS_FAN34;
+	}
+	if (pmbus_check_word_register(client, 0, PMBUS_READ_TEMPERATURE_1)) {
+		info->func[0] |= PMBUS_HAVE_TEMP;
+		if (pmbus_check_byte_register(client, 0,
+					      PMBUS_STATUS_TEMPERATURE))
+			info->func[0] |= PMBUS_HAVE_STATUS_TEMP;
+	}
+
+	/* Sensors detected on all pages */
+	for (page = 0; page < info->pages; page++) {
+		if (pmbus_check_word_register(client, page, PMBUS_READ_VOUT)) {
+			info->func[page] |= PMBUS_HAVE_VOUT;
+			if (pmbus_check_byte_register(client, page,
+						      PMBUS_STATUS_VOUT))
+				info->func[page] |= PMBUS_HAVE_STATUS_VOUT;
+		}
+		if (pmbus_check_word_register(client, page, PMBUS_READ_IOUT)) {
+			info->func[page] |= PMBUS_HAVE_IOUT;
+			if (pmbus_check_byte_register(client, 0,
+						      PMBUS_STATUS_IOUT))
+				info->func[page] |= PMBUS_HAVE_STATUS_IOUT;
+		}
+		if (pmbus_check_word_register(client, page, PMBUS_READ_POUT))
+			info->func[page] |= PMBUS_HAVE_POUT;
+	}
+}
+
+/*
+ * Identify chip parameters.
+ */
+static int pmbus_identify(struct i2c_client *client,
+			  struct pmbus_driver_info *info)
+{
+	if (!info->pages) {
+		/*
+		 * Check if the PAGE command is supported. If it is,
+		 * keep setting the page number until it fails or until the
+		 * maximum number of pages has been reached. Assume that
+		 * this is the number of pages supported by the chip.
+		 */
+		if (pmbus_check_byte_register(client, 0, PMBUS_PAGE)) {
+			int page;
+
+			for (page = 1; page < PMBUS_PAGES; page++) {
+				if (pmbus_set_page(client, page) < 0)
+					break;
+			}
+			pmbus_set_page(client, 0);
+			info->pages = page;
+		} else {
+			info->pages = 1;
+		}
+	}
+
+	/*
+	 * We should check if the COEFFICIENTS register is supported.
+	 * If it is, and the chip is configured for direct mode, we can read
+	 * the coefficients from the chip, one set per group of sensor
+	 * registers.
+	 *
+	 * To do this, we will need access to a chip which actually supports the
+	 * COEFFICIENTS command, since the command is too complex to implement
+	 * without testing it.
+	 */
+
+	/* Try to find sensor groups  */
+	pmbus_find_sensor_groups(client, info);
+
+	return 0;
+}
+
+static int pmbus_probe(struct i2c_client *client,
+		       const struct i2c_device_id *id)
+{
+	struct pmbus_driver_info *info;
+	int ret;
+
+	info = kzalloc(sizeof(struct pmbus_driver_info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	info->pages = id->driver_data;
+	info->identify = pmbus_identify;
+
+	ret = pmbus_do_probe(client, id, info);
+	if (ret < 0)
+		goto out;
+	return 0;
+
+out:
+	kfree(info);
+	return ret;
+}
+
+static int pmbus_remove(struct i2c_client *client)
+{
+	int ret;
+	const struct pmbus_driver_info *info;
+
+	info = pmbus_get_driver_info(client);
+	ret = pmbus_do_remove(client);
+	kfree(info);
+	return ret;
+}
+
+/*
+ * Use driver_data to set the number of pages supported by the chip.
+ */
+static const struct i2c_device_id pmbus_id[] = {
+	{"bmr450", 1},
+	{"bmr451", 1},
+	{"bmr453", 1},
+	{"bmr454", 1},
+	{"ltc2978", 8},
+	{"pmbus", 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, pmbus_id);
+
+/* This is the driver that will be inserted */
+static struct i2c_driver pmbus_driver = {
+	.driver = {
+		   .name = "pmbus",
+		   },
+	.probe = pmbus_probe,
+	.remove = pmbus_remove,
+	.id_table = pmbus_id,
+};
+
+static int __init pmbus_init(void)
+{
+	return i2c_add_driver(&pmbus_driver);
+}
+
+static void __exit pmbus_exit(void)
+{
+	i2c_del_driver(&pmbus_driver);
+}
+
+MODULE_AUTHOR("Guenter Roeck");
+MODULE_DESCRIPTION("Generic PMBus driver");
+MODULE_LICENSE("GPL");
+module_init(pmbus_init);
+module_exit(pmbus_exit);
diff --git a/drivers/hwmon/pmbus.h b/drivers/hwmon/pmbus.h
new file mode 100644
index 000000000000..a81f7f228762
--- /dev/null
+++ b/drivers/hwmon/pmbus.h
@@ -0,0 +1,313 @@
+/*
+ * pmbus.h - Common defines and structures for PMBus devices
+ *
+ * Copyright (c) 2010, 2011 Ericsson AB.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef PMBUS_H
+#define PMBUS_H
+
+/*
+ * Registers
+ */
+#define PMBUS_PAGE			0x00
+#define PMBUS_OPERATION			0x01
+#define PMBUS_ON_OFF_CONFIG		0x02
+#define PMBUS_CLEAR_FAULTS		0x03
+#define PMBUS_PHASE			0x04
+
+#define PMBUS_CAPABILITY		0x19
+#define PMBUS_QUERY			0x1A
+
+#define PMBUS_VOUT_MODE			0x20
+#define PMBUS_VOUT_COMMAND		0x21
+#define PMBUS_VOUT_TRIM			0x22
+#define PMBUS_VOUT_CAL_OFFSET		0x23
+#define PMBUS_VOUT_MAX			0x24
+#define PMBUS_VOUT_MARGIN_HIGH		0x25
+#define PMBUS_VOUT_MARGIN_LOW		0x26
+#define PMBUS_VOUT_TRANSITION_RATE	0x27
+#define PMBUS_VOUT_DROOP		0x28
+#define PMBUS_VOUT_SCALE_LOOP		0x29
+#define PMBUS_VOUT_SCALE_MONITOR	0x2A
+
+#define PMBUS_COEFFICIENTS		0x30
+#define PMBUS_POUT_MAX			0x31
+
+#define PMBUS_FAN_CONFIG_12		0x3A
+#define PMBUS_FAN_COMMAND_1		0x3B
+#define PMBUS_FAN_COMMAND_2		0x3C
+#define PMBUS_FAN_CONFIG_34		0x3D
+#define PMBUS_FAN_COMMAND_3		0x3E
+#define PMBUS_FAN_COMMAND_4		0x3F
+
+#define PMBUS_VOUT_OV_FAULT_LIMIT	0x40
+#define PMBUS_VOUT_OV_FAULT_RESPONSE	0x41
+#define PMBUS_VOUT_OV_WARN_LIMIT	0x42
+#define PMBUS_VOUT_UV_WARN_LIMIT	0x43
+#define PMBUS_VOUT_UV_FAULT_LIMIT	0x44
+#define PMBUS_VOUT_UV_FAULT_RESPONSE	0x45
+#define PMBUS_IOUT_OC_FAULT_LIMIT	0x46
+#define PMBUS_IOUT_OC_FAULT_RESPONSE	0x47
+#define PMBUS_IOUT_OC_LV_FAULT_LIMIT	0x48
+#define PMBUS_IOUT_OC_LV_FAULT_RESPONSE	0x49
+#define PMBUS_IOUT_OC_WARN_LIMIT	0x4A
+#define PMBUS_IOUT_UC_FAULT_LIMIT	0x4B
+#define PMBUS_IOUT_UC_FAULT_RESPONSE	0x4C
+
+#define PMBUS_OT_FAULT_LIMIT		0x4F
+#define PMBUS_OT_FAULT_RESPONSE		0x50
+#define PMBUS_OT_WARN_LIMIT		0x51
+#define PMBUS_UT_WARN_LIMIT		0x52
+#define PMBUS_UT_FAULT_LIMIT		0x53
+#define PMBUS_UT_FAULT_RESPONSE		0x54
+#define PMBUS_VIN_OV_FAULT_LIMIT	0x55
+#define PMBUS_VIN_OV_FAULT_RESPONSE	0x56
+#define PMBUS_VIN_OV_WARN_LIMIT		0x57
+#define PMBUS_VIN_UV_WARN_LIMIT		0x58
+#define PMBUS_VIN_UV_FAULT_LIMIT	0x59
+
+#define PMBUS_IIN_OC_FAULT_LIMIT	0x5B
+#define PMBUS_IIN_OC_WARN_LIMIT		0x5D
+
+#define PMBUS_POUT_OP_FAULT_LIMIT	0x68
+#define PMBUS_POUT_OP_WARN_LIMIT	0x6A
+#define PMBUS_PIN_OP_WARN_LIMIT		0x6B
+
+#define PMBUS_STATUS_BYTE		0x78
+#define PMBUS_STATUS_WORD		0x79
+#define PMBUS_STATUS_VOUT		0x7A
+#define PMBUS_STATUS_IOUT		0x7B
+#define PMBUS_STATUS_INPUT		0x7C
+#define PMBUS_STATUS_TEMPERATURE	0x7D
+#define PMBUS_STATUS_CML		0x7E
+#define PMBUS_STATUS_OTHER		0x7F
+#define PMBUS_STATUS_MFR_SPECIFIC	0x80
+#define PMBUS_STATUS_FAN_12		0x81
+#define PMBUS_STATUS_FAN_34		0x82
+
+#define PMBUS_READ_VIN			0x88
+#define PMBUS_READ_IIN			0x89
+#define PMBUS_READ_VCAP			0x8A
+#define PMBUS_READ_VOUT			0x8B
+#define PMBUS_READ_IOUT			0x8C
+#define PMBUS_READ_TEMPERATURE_1	0x8D
+#define PMBUS_READ_TEMPERATURE_2	0x8E
+#define PMBUS_READ_TEMPERATURE_3	0x8F
+#define PMBUS_READ_FAN_SPEED_1		0x90
+#define PMBUS_READ_FAN_SPEED_2		0x91
+#define PMBUS_READ_FAN_SPEED_3		0x92
+#define PMBUS_READ_FAN_SPEED_4		0x93
+#define PMBUS_READ_DUTY_CYCLE		0x94
+#define PMBUS_READ_FREQUENCY		0x95
+#define PMBUS_READ_POUT			0x96
+#define PMBUS_READ_PIN			0x97
+
+#define PMBUS_REVISION			0x98
+#define PMBUS_MFR_ID			0x99
+#define PMBUS_MFR_MODEL			0x9A
+#define PMBUS_MFR_REVISION		0x9B
+#define PMBUS_MFR_LOCATION		0x9C
+#define PMBUS_MFR_DATE			0x9D
+#define PMBUS_MFR_SERIAL		0x9E
+
+/*
+ * CAPABILITY
+ */
+#define PB_CAPABILITY_SMBALERT		(1<<4)
+#define PB_CAPABILITY_ERROR_CHECK	(1<<7)
+
+/*
+ * VOUT_MODE
+ */
+#define PB_VOUT_MODE_MODE_MASK		0xe0
+#define PB_VOUT_MODE_PARAM_MASK		0x1f
+
+#define PB_VOUT_MODE_LINEAR		0x00
+#define PB_VOUT_MODE_VID		0x20
+#define PB_VOUT_MODE_DIRECT		0x40
+
+/*
+ * Fan configuration
+ */
+#define PB_FAN_2_PULSE_MASK		((1 << 0) | (1 << 1))
+#define PB_FAN_2_RPM			(1 << 2)
+#define PB_FAN_2_INSTALLED		(1 << 3)
+#define PB_FAN_1_PULSE_MASK		((1 << 4) | (1 << 5))
+#define PB_FAN_1_RPM			(1 << 6)
+#define PB_FAN_1_INSTALLED		(1 << 7)
+
+/*
+ * STATUS_BYTE, STATUS_WORD (lower)
+ */
+#define PB_STATUS_NONE_ABOVE		(1<<0)
+#define PB_STATUS_CML			(1<<1)
+#define PB_STATUS_TEMPERATURE		(1<<2)
+#define PB_STATUS_VIN_UV		(1<<3)
+#define PB_STATUS_IOUT_OC		(1<<4)
+#define PB_STATUS_VOUT_OV		(1<<5)
+#define PB_STATUS_OFF			(1<<6)
+#define PB_STATUS_BUSY			(1<<7)
+
+/*
+ * STATUS_WORD (upper)
+ */
+#define PB_STATUS_UNKNOWN		(1<<8)
+#define PB_STATUS_OTHER			(1<<9)
+#define PB_STATUS_FANS			(1<<10)
+#define PB_STATUS_POWER_GOOD_N		(1<<11)
+#define PB_STATUS_WORD_MFR		(1<<12)
+#define PB_STATUS_INPUT			(1<<13)
+#define PB_STATUS_IOUT_POUT		(1<<14)
+#define PB_STATUS_VOUT			(1<<15)
+
+/*
+ * STATUS_IOUT
+ */
+#define PB_POUT_OP_WARNING		(1<<0)
+#define PB_POUT_OP_FAULT		(1<<1)
+#define PB_POWER_LIMITING		(1<<2)
+#define PB_CURRENT_SHARE_FAULT		(1<<3)
+#define PB_IOUT_UC_FAULT		(1<<4)
+#define PB_IOUT_OC_WARNING		(1<<5)
+#define PB_IOUT_OC_LV_FAULT		(1<<6)
+#define PB_IOUT_OC_FAULT		(1<<7)
+
+/*
+ * STATUS_VOUT, STATUS_INPUT
+ */
+#define PB_VOLTAGE_UV_FAULT		(1<<4)
+#define PB_VOLTAGE_UV_WARNING		(1<<5)
+#define PB_VOLTAGE_OV_WARNING		(1<<6)
+#define PB_VOLTAGE_OV_FAULT		(1<<7)
+
+/*
+ * STATUS_INPUT
+ */
+#define PB_PIN_OP_WARNING		(1<<0)
+#define PB_IIN_OC_WARNING		(1<<1)
+#define PB_IIN_OC_FAULT			(1<<2)
+
+/*
+ * STATUS_TEMPERATURE
+ */
+#define PB_TEMP_UT_FAULT		(1<<4)
+#define PB_TEMP_UT_WARNING		(1<<5)
+#define PB_TEMP_OT_WARNING		(1<<6)
+#define PB_TEMP_OT_FAULT		(1<<7)
+
+/*
+ * STATUS_FAN
+ */
+#define PB_FAN_AIRFLOW_WARNING		(1<<0)
+#define PB_FAN_AIRFLOW_FAULT		(1<<1)
+#define PB_FAN_FAN2_SPEED_OVERRIDE	(1<<2)
+#define PB_FAN_FAN1_SPEED_OVERRIDE	(1<<3)
+#define PB_FAN_FAN2_WARNING		(1<<4)
+#define PB_FAN_FAN1_WARNING		(1<<5)
+#define PB_FAN_FAN2_FAULT		(1<<6)
+#define PB_FAN_FAN1_FAULT		(1<<7)
+
+/*
+ * CML_FAULT_STATUS
+ */
+#define PB_CML_FAULT_OTHER_MEM_LOGIC	(1<<0)
+#define PB_CML_FAULT_OTHER_COMM		(1<<1)
+#define PB_CML_FAULT_PROCESSOR		(1<<3)
+#define PB_CML_FAULT_MEMORY		(1<<4)
+#define PB_CML_FAULT_PACKET_ERROR	(1<<5)
+#define PB_CML_FAULT_INVALID_DATA	(1<<6)
+#define PB_CML_FAULT_INVALID_COMMAND	(1<<7)
+
+enum pmbus_sensor_classes {
+	PSC_VOLTAGE_IN = 0,
+	PSC_VOLTAGE_OUT,
+	PSC_CURRENT_IN,
+	PSC_CURRENT_OUT,
+	PSC_POWER,
+	PSC_TEMPERATURE,
+	PSC_FAN,
+	PSC_NUM_CLASSES		/* Number of power sensor classes */
+};
+
+#define PMBUS_PAGES	32	/* Per PMBus specification */
+
+/* Functionality bit mask */
+#define PMBUS_HAVE_VIN		(1 << 0)
+#define PMBUS_HAVE_VCAP		(1 << 1)
+#define PMBUS_HAVE_VOUT		(1 << 2)
+#define PMBUS_HAVE_IIN		(1 << 3)
+#define PMBUS_HAVE_IOUT		(1 << 4)
+#define PMBUS_HAVE_PIN		(1 << 5)
+#define PMBUS_HAVE_POUT		(1 << 6)
+#define PMBUS_HAVE_FAN12	(1 << 7)
+#define PMBUS_HAVE_FAN34	(1 << 8)
+#define PMBUS_HAVE_TEMP		(1 << 9)
+#define PMBUS_HAVE_TEMP2	(1 << 10)
+#define PMBUS_HAVE_TEMP3	(1 << 11)
+#define PMBUS_HAVE_STATUS_VOUT	(1 << 12)
+#define PMBUS_HAVE_STATUS_IOUT	(1 << 13)
+#define PMBUS_HAVE_STATUS_INPUT	(1 << 14)
+#define PMBUS_HAVE_STATUS_TEMP	(1 << 15)
+#define PMBUS_HAVE_STATUS_FAN12	(1 << 16)
+#define PMBUS_HAVE_STATUS_FAN34	(1 << 17)
+
+struct pmbus_driver_info {
+	int pages;		/* Total number of pages */
+	bool direct[PSC_NUM_CLASSES];
+				/* true if device uses direct data format
+				   for the given sensor class */
+	/*
+	 * Support one set of coefficients for each sensor type
+	 * Used for chips providing data in direct mode.
+	 */
+	int m[PSC_NUM_CLASSES];	/* mantissa for direct data format */
+	int b[PSC_NUM_CLASSES];	/* offset */
+	int R[PSC_NUM_CLASSES];	/* exponent */
+
+	u32 func[PMBUS_PAGES];	/* Functionality, per page */
+	/*
+	 * The get_status function maps manufacturing specific status values
+	 * into PMBus standard status values.
+	 * This function is optional and only necessary if chip specific status
+	 * register values have to be mapped into standard PMBus status register
+	 * values.
+	 */
+	int (*get_status)(struct i2c_client *client, int page, int reg);
+	/*
+	 * The identify function determines supported PMBus functionality.
+	 * This function is only necessary if a chip driver supports multiple
+	 * chips, and the chip functionality is not pre-determined.
+	 */
+	int (*identify)(struct i2c_client *client,
+			struct pmbus_driver_info *info);
+};
+
+/* Function declarations */
+
+int pmbus_set_page(struct i2c_client *client, u8 page);
+int pmbus_read_word_data(struct i2c_client *client, u8 page, u8 reg);
+void pmbus_clear_faults(struct i2c_client *client);
+bool pmbus_check_byte_register(struct i2c_client *client, int page, int reg);
+bool pmbus_check_word_register(struct i2c_client *client, int page, int reg);
+int pmbus_do_probe(struct i2c_client *client, const struct i2c_device_id *id,
+		   struct pmbus_driver_info *info);
+int pmbus_do_remove(struct i2c_client *client);
+const struct pmbus_driver_info *pmbus_get_driver_info(struct i2c_client
+						      *client);
+
+#endif /* PMBUS_H */
diff --git a/drivers/hwmon/pmbus_core.c b/drivers/hwmon/pmbus_core.c
new file mode 100644
index 000000000000..6474512f49b0
--- /dev/null
+++ b/drivers/hwmon/pmbus_core.c
@@ -0,0 +1,1658 @@
+/*
+ * Hardware monitoring driver for PMBus devices
+ *
+ * Copyright (c) 2010, 2011 Ericsson AB.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/delay.h>
+#include <linux/i2c/pmbus.h>
+#include "pmbus.h"
+
+/*
+ * Constants needed to determine number of sensors, booleans, and labels.
+ */
+#define PMBUS_MAX_INPUT_SENSORS		11	/* 6*volt, 3*curr, 2*power */
+#define PMBUS_VOUT_SENSORS_PER_PAGE	5	/* input, min, max, lcrit,
+						   crit */
+#define PMBUS_IOUT_SENSORS_PER_PAGE	4	/* input, min, max, crit */
+#define PMBUS_POUT_SENSORS_PER_PAGE	4	/* input, cap, max, crit */
+#define PMBUS_MAX_SENSORS_PER_FAN	1	/* input */
+#define PMBUS_MAX_SENSORS_PER_TEMP	5	/* input, min, max, lcrit,
+						   crit */
+
+#define PMBUS_MAX_INPUT_BOOLEANS	7	/* v: min_alarm, max_alarm,
+						   lcrit_alarm, crit_alarm;
+						   c: alarm, crit_alarm;
+						   p: crit_alarm */
+#define PMBUS_VOUT_BOOLEANS_PER_PAGE	4	/* min_alarm, max_alarm,
+						   lcrit_alarm, crit_alarm */
+#define PMBUS_IOUT_BOOLEANS_PER_PAGE	3	/* alarm, lcrit_alarm,
+						   crit_alarm */
+#define PMBUS_POUT_BOOLEANS_PER_PAGE	2	/* alarm, crit_alarm */
+#define PMBUS_MAX_BOOLEANS_PER_FAN	2	/* alarm, fault */
+#define PMBUS_MAX_BOOLEANS_PER_TEMP	4	/* min_alarm, max_alarm,
+						   lcrit_alarm, crit_alarm */
+
+#define PMBUS_MAX_INPUT_LABELS		4	/* vin, vcap, iin, pin */
+
+/*
+ * status, status_vout, status_iout, status_fans, status_fan34, and status_temp
+ * are paged. status_input is unpaged.
+ */
+#define PB_NUM_STATUS_REG	(PMBUS_PAGES * 6 + 1)
+
+/*
+ * Index into status register array, per status register group
+ */
+#define PB_STATUS_BASE		0
+#define PB_STATUS_VOUT_BASE	(PB_STATUS_BASE + PMBUS_PAGES)
+#define PB_STATUS_IOUT_BASE	(PB_STATUS_VOUT_BASE + PMBUS_PAGES)
+#define PB_STATUS_FAN_BASE	(PB_STATUS_IOUT_BASE + PMBUS_PAGES)
+#define PB_STATUS_FAN34_BASE	(PB_STATUS_FAN_BASE + PMBUS_PAGES)
+#define PB_STATUS_INPUT_BASE	(PB_STATUS_FAN34_BASE + PMBUS_PAGES)
+#define PB_STATUS_TEMP_BASE	(PB_STATUS_INPUT_BASE + 1)
+
+struct pmbus_sensor {
+	char name[I2C_NAME_SIZE];	/* sysfs sensor name */
+	struct sensor_device_attribute attribute;
+	u8 page;		/* page number */
+	u8 reg;			/* register */
+	enum pmbus_sensor_classes class;	/* sensor class */
+	bool update;		/* runtime sensor update needed */
+	int data;		/* Sensor data.
+				   Negative if there was a read error */
+};
+
+struct pmbus_boolean {
+	char name[I2C_NAME_SIZE];	/* sysfs boolean name */
+	struct sensor_device_attribute attribute;
+};
+
+struct pmbus_label {
+	char name[I2C_NAME_SIZE];	/* sysfs label name */
+	struct sensor_device_attribute attribute;
+	char label[I2C_NAME_SIZE];	/* label */
+};
+
+struct pmbus_data {
+	struct device *hwmon_dev;
+
+	u32 flags;		/* from platform data */
+
+	int exponent;		/* linear mode: exponent for output voltages */
+
+	const struct pmbus_driver_info *info;
+
+	int max_attributes;
+	int num_attributes;
+	struct attribute **attributes;
+	struct attribute_group group;
+
+	/*
+	 * Sensors cover both sensor and limit registers.
+	 */
+	int max_sensors;
+	int num_sensors;
+	struct pmbus_sensor *sensors;
+	/*
+	 * Booleans are used for alarms.
+	 * Values are determined from status registers.
+	 */
+	int max_booleans;
+	int num_booleans;
+	struct pmbus_boolean *booleans;
+	/*
+	 * Labels are used to map generic names (e.g., "in1")
+	 * to PMBus specific names (e.g., "vin" or "vout1").
+	 */
+	int max_labels;
+	int num_labels;
+	struct pmbus_label *labels;
+
+	struct mutex update_lock;
+	bool valid;
+	unsigned long last_updated;	/* in jiffies */
+
+	/*
+	 * A single status register covers multiple attributes,
+	 * so we keep them all together.
+	 */
+	u8 status_bits;
+	u8 status[PB_NUM_STATUS_REG];
+
+	u8 currpage;
+};
+
+int pmbus_set_page(struct i2c_client *client, u8 page)
+{
+	struct pmbus_data *data = i2c_get_clientdata(client);
+	int rv = 0;
+	int newpage;
+
+	if (page != data->currpage) {
+		rv = i2c_smbus_write_byte_data(client, PMBUS_PAGE, page);
+		newpage = i2c_smbus_read_byte_data(client, PMBUS_PAGE);
+		if (newpage != page)
+			rv = -EINVAL;
+		else
+			data->currpage = page;
+	}
+	return rv;
+}
+EXPORT_SYMBOL_GPL(pmbus_set_page);
+
+static int pmbus_write_byte(struct i2c_client *client, u8 page, u8 value)
+{
+	int rv;
+
+	rv = pmbus_set_page(client, page);
+	if (rv < 0)
+		return rv;
+
+	return i2c_smbus_write_byte(client, value);
+}
+
+static int pmbus_write_word_data(struct i2c_client *client, u8 page, u8 reg,
+				 u16 word)
+{
+	int rv;
+
+	rv = pmbus_set_page(client, page);
+	if (rv < 0)
+		return rv;
+
+	return i2c_smbus_write_word_data(client, reg, word);
+}
+
+int pmbus_read_word_data(struct i2c_client *client, u8 page, u8 reg)
+{
+	int rv;
+
+	rv = pmbus_set_page(client, page);
+	if (rv < 0)
+		return rv;
+
+	return i2c_smbus_read_word_data(client, reg);
+}
+EXPORT_SYMBOL_GPL(pmbus_read_word_data);
+
+static int pmbus_read_byte_data(struct i2c_client *client, u8 page, u8 reg)
+{
+	int rv;
+
+	rv = pmbus_set_page(client, page);
+	if (rv < 0)
+		return rv;
+
+	return i2c_smbus_read_byte_data(client, reg);
+}
+
+static void pmbus_clear_fault_page(struct i2c_client *client, int page)
+{
+	pmbus_write_byte(client, page, PMBUS_CLEAR_FAULTS);
+}
+
+void pmbus_clear_faults(struct i2c_client *client)
+{
+	struct pmbus_data *data = i2c_get_clientdata(client);
+	int i;
+
+	for (i = 0; i < data->info->pages; i++)
+		pmbus_clear_fault_page(client, i);
+}
+EXPORT_SYMBOL_GPL(pmbus_clear_faults);
+
+static int pmbus_check_status_cml(struct i2c_client *client, int page)
+{
+	int status, status2;
+
+	status = pmbus_read_byte_data(client, page, PMBUS_STATUS_BYTE);
+	if (status < 0 || (status & PB_STATUS_CML)) {
+		status2 = pmbus_read_byte_data(client, page, PMBUS_STATUS_CML);
+		if (status2 < 0 || (status2 & PB_CML_FAULT_INVALID_COMMAND))
+			return -EINVAL;
+	}
+	return 0;
+}
+
+bool pmbus_check_byte_register(struct i2c_client *client, int page, int reg)
+{
+	int rv;
+	struct pmbus_data *data = i2c_get_clientdata(client);
+
+	rv = pmbus_read_byte_data(client, page, reg);
+	if (rv >= 0 && !(data->flags & PMBUS_SKIP_STATUS_CHECK))
+		rv = pmbus_check_status_cml(client, page);
+	pmbus_clear_fault_page(client, page);
+	return rv >= 0;
+}
+EXPORT_SYMBOL_GPL(pmbus_check_byte_register);
+
+bool pmbus_check_word_register(struct i2c_client *client, int page, int reg)
+{
+	int rv;
+	struct pmbus_data *data = i2c_get_clientdata(client);
+
+	rv = pmbus_read_word_data(client, page, reg);
+	if (rv >= 0 && !(data->flags & PMBUS_SKIP_STATUS_CHECK))
+		rv = pmbus_check_status_cml(client, page);
+	pmbus_clear_fault_page(client, page);
+	return rv >= 0;
+}
+EXPORT_SYMBOL_GPL(pmbus_check_word_register);
+
+const struct pmbus_driver_info *pmbus_get_driver_info(struct i2c_client *client)
+{
+	struct pmbus_data *data = i2c_get_clientdata(client);
+
+	return data->info;
+}
+EXPORT_SYMBOL_GPL(pmbus_get_driver_info);
+
+static int pmbus_get_status(struct i2c_client *client, int page, int reg)
+{
+	struct pmbus_data *data = i2c_get_clientdata(client);
+	const struct pmbus_driver_info *info = data->info;
+	int status;
+
+	if (info->get_status) {
+		status = info->get_status(client, page, reg);
+		if (status != -ENODATA)
+			return status;
+	}
+	return  pmbus_read_byte_data(client, page, reg);
+}
+
+static struct pmbus_data *pmbus_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct pmbus_data *data = i2c_get_clientdata(client);
+	const struct pmbus_driver_info *info = data->info;
+
+	mutex_lock(&data->update_lock);
+	if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
+		int i;
+
+		for (i = 0; i < info->pages; i++)
+			data->status[PB_STATUS_BASE + i]
+			    = pmbus_read_byte_data(client, i,
+						   PMBUS_STATUS_BYTE);
+		for (i = 0; i < info->pages; i++) {
+			if (!(info->func[i] & PMBUS_HAVE_STATUS_VOUT))
+				continue;
+			data->status[PB_STATUS_VOUT_BASE + i]
+			  = pmbus_get_status(client, i, PMBUS_STATUS_VOUT);
+		}
+		for (i = 0; i < info->pages; i++) {
+			if (!(info->func[i] & PMBUS_HAVE_STATUS_IOUT))
+				continue;
+			data->status[PB_STATUS_IOUT_BASE + i]
+			  = pmbus_get_status(client, i, PMBUS_STATUS_IOUT);
+		}
+		for (i = 0; i < info->pages; i++) {
+			if (!(info->func[i] & PMBUS_HAVE_STATUS_TEMP))
+				continue;
+			data->status[PB_STATUS_TEMP_BASE + i]
+			  = pmbus_get_status(client, i,
+					     PMBUS_STATUS_TEMPERATURE);
+		}
+		for (i = 0; i < info->pages; i++) {
+			if (!(info->func[i] & PMBUS_HAVE_STATUS_FAN12))
+				continue;
+			data->status[PB_STATUS_FAN_BASE + i]
+			  = pmbus_get_status(client, i, PMBUS_STATUS_FAN_12);
+		}
+
+		for (i = 0; i < info->pages; i++) {
+			if (!(info->func[i] & PMBUS_HAVE_STATUS_FAN34))
+				continue;
+			data->status[PB_STATUS_FAN34_BASE + i]
+			  = pmbus_get_status(client, i, PMBUS_STATUS_FAN_34);
+		}
+
+		if (info->func[0] & PMBUS_HAVE_STATUS_INPUT)
+			data->status[PB_STATUS_INPUT_BASE]
+			  = pmbus_get_status(client, 0, PMBUS_STATUS_INPUT);
+
+		for (i = 0; i < data->num_sensors; i++) {
+			struct pmbus_sensor *sensor = &data->sensors[i];
+
+			if (!data->valid || sensor->update)
+				sensor->data
+				    = pmbus_read_word_data(client, sensor->page,
+							   sensor->reg);
+		}
+		pmbus_clear_faults(client);
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+	mutex_unlock(&data->update_lock);
+	return data;
+}
+
+/*
+ * Convert linear sensor values to milli- or micro-units
+ * depending on sensor type.
+ */
+static int pmbus_reg2data_linear(struct pmbus_data *data,
+				 struct pmbus_sensor *sensor)
+{
+	s16 exponent;
+	s32 mantissa;
+	long val;
+
+	if (sensor->class == PSC_VOLTAGE_OUT) {	/* LINEAR16 */
+		exponent = data->exponent;
+		mantissa = (u16) sensor->data;
+	} else {				/* LINEAR11 */
+		exponent = (sensor->data >> 11) & 0x001f;
+		mantissa = sensor->data & 0x07ff;
+
+		if (exponent > 0x0f)
+			exponent |= 0xffe0;	/* sign extend exponent */
+		if (mantissa > 0x03ff)
+			mantissa |= 0xfffff800;	/* sign extend mantissa */
+	}
+
+	val = mantissa;
+
+	/* scale result to milli-units for all sensors except fans */
+	if (sensor->class != PSC_FAN)
+		val = val * 1000L;
+
+	/* scale result to micro-units for power sensors */
+	if (sensor->class == PSC_POWER)
+		val = val * 1000L;
+
+	if (exponent >= 0)
+		val <<= exponent;
+	else
+		val >>= -exponent;
+
+	return (int)val;
+}
+
+/*
+ * Convert direct sensor values to milli- or micro-units
+ * depending on sensor type.
+ */
+static int pmbus_reg2data_direct(struct pmbus_data *data,
+				 struct pmbus_sensor *sensor)
+{
+	long val = (s16) sensor->data;
+	long m, b, R;
+
+	m = data->info->m[sensor->class];
+	b = data->info->b[sensor->class];
+	R = data->info->R[sensor->class];
+
+	if (m == 0)
+		return 0;
+
+	/* X = 1/m * (Y * 10^-R - b) */
+	R = -R;
+	/* scale result to milli-units for everything but fans */
+	if (sensor->class != PSC_FAN) {
+		R += 3;
+		b *= 1000;
+	}
+
+	/* scale result to micro-units for power sensors */
+	if (sensor->class == PSC_POWER) {
+		R += 3;
+		b *= 1000;
+	}
+
+	while (R > 0) {
+		val *= 10;
+		R--;
+	}
+	while (R < 0) {
+		val = DIV_ROUND_CLOSEST(val, 10);
+		R++;
+	}
+
+	return (int)((val - b) / m);
+}
+
+static int pmbus_reg2data(struct pmbus_data *data, struct pmbus_sensor *sensor)
+{
+	int val;
+
+	if (data->info->direct[sensor->class])
+		val = pmbus_reg2data_direct(data, sensor);
+	else
+		val = pmbus_reg2data_linear(data, sensor);
+
+	return val;
+}
+
+#define MAX_MANTISSA	(1023 * 1000)
+#define MIN_MANTISSA	(511 * 1000)
+
+static u16 pmbus_data2reg_linear(struct pmbus_data *data,
+				 enum pmbus_sensor_classes class, long val)
+{
+	s16 exponent = 0, mantissa;
+	bool negative = false;
+
+	/* simple case */
+	if (val == 0)
+		return 0;
+
+	if (class == PSC_VOLTAGE_OUT) {
+		/* LINEAR16 does not support negative voltages */
+		if (val < 0)
+			return 0;
+
+		/*
+		 * For a static exponents, we don't have a choice
+		 * but to adjust the value to it.
+		 */
+		if (data->exponent < 0)
+			val <<= -data->exponent;
+		else
+			val >>= data->exponent;
+		val = DIV_ROUND_CLOSEST(val, 1000);
+		return val & 0xffff;
+	}
+
+	if (val < 0) {
+		negative = true;
+		val = -val;
+	}
+
+	/* Power is in uW. Convert to mW before converting. */
+	if (class == PSC_POWER)
+		val = DIV_ROUND_CLOSEST(val, 1000L);
+
+	/*
+	 * For simplicity, convert fan data to milli-units
+	 * before calculating the exponent.
+	 */
+	if (class == PSC_FAN)
+		val = val * 1000;
+
+	/* Reduce large mantissa until it fits into 10 bit */
+	while (val >= MAX_MANTISSA && exponent < 15) {
+		exponent++;
+		val >>= 1;
+	}
+	/* Increase small mantissa to improve precision */
+	while (val < MIN_MANTISSA && exponent > -15) {
+		exponent--;
+		val <<= 1;
+	}
+
+	/* Convert mantissa from milli-units to units */
+	mantissa = DIV_ROUND_CLOSEST(val, 1000);
+
+	/* Ensure that resulting number is within range */
+	if (mantissa > 0x3ff)
+		mantissa = 0x3ff;
+
+	/* restore sign */
+	if (negative)
+		mantissa = -mantissa;
+
+	/* Convert to 5 bit exponent, 11 bit mantissa */
+	return (mantissa & 0x7ff) | ((exponent << 11) & 0xf800);
+}
+
+static u16 pmbus_data2reg_direct(struct pmbus_data *data,
+				 enum pmbus_sensor_classes class, long val)
+{
+	long m, b, R;
+
+	m = data->info->m[class];
+	b = data->info->b[class];
+	R = data->info->R[class];
+
+	/* Power is in uW. Adjust R and b. */
+	if (class == PSC_POWER) {
+		R -= 3;
+		b *= 1000;
+	}
+
+	/* Calculate Y = (m * X + b) * 10^R */
+	if (class != PSC_FAN) {
+		R -= 3;		/* Adjust R and b for data in milli-units */
+		b *= 1000;
+	}
+	val = val * m + b;
+
+	while (R > 0) {
+		val *= 10;
+		R--;
+	}
+	while (R < 0) {
+		val = DIV_ROUND_CLOSEST(val, 10);
+		R++;
+	}
+
+	return val;
+}
+
+static u16 pmbus_data2reg(struct pmbus_data *data,
+			  enum pmbus_sensor_classes class, long val)
+{
+	u16 regval;
+
+	if (data->info->direct[class])
+		regval = pmbus_data2reg_direct(data, class, val);
+	else
+		regval = pmbus_data2reg_linear(data, class, val);
+
+	return regval;
+}
+
+/*
+ * Return boolean calculated from converted data.
+ * <index> defines a status register index and mask, and optionally
+ * two sensor indexes.
+ * The upper half-word references the two sensors,
+ * two sensor indices.
+ * The upper half-word references the two optional sensors,
+ * the lower half word references status register and mask.
+ * The function returns true if (status[reg] & mask) is true and,
+ * if specified, if v1 >= v2.
+ * To determine if an object exceeds upper limits, specify <v, limit>.
+ * To determine if an object exceeds lower limits, specify <limit, v>.
+ *
+ * For booleans created with pmbus_add_boolean_reg(), only the lower 16 bits of
+ * index are set. s1 and s2 (the sensor index values) are zero in this case.
+ * The function returns true if (status[reg] & mask) is true.
+ *
+ * If the boolean was created with pmbus_add_boolean_cmp(), a comparison against
+ * a specified limit has to be performed to determine the boolean result.
+ * In this case, the function returns true if v1 >= v2 (where v1 and v2 are
+ * sensor values referenced by sensor indices s1 and s2).
+ *
+ * To determine if an object exceeds upper limits, specify <s1,s2> = <v,limit>.
+ * To determine if an object exceeds lower limits, specify <s1,s2> = <limit,v>.
+ *
+ * If a negative value is stored in any of the referenced registers, this value
+ * reflects an error code which will be returned.
+ */
+static int pmbus_get_boolean(struct pmbus_data *data, int index, int *val)
+{
+	u8 s1 = (index >> 24) & 0xff;
+	u8 s2 = (index >> 16) & 0xff;
+	u8 reg = (index >> 8) & 0xff;
+	u8 mask = index & 0xff;
+	int status;
+	u8 regval;
+
+	status = data->status[reg];
+	if (status < 0)
+		return status;
+
+	regval = status & mask;
+	if (!s1 && !s2)
+		*val = !!regval;
+	else {
+		int v1, v2;
+		struct pmbus_sensor *sensor1, *sensor2;
+
+		sensor1 = &data->sensors[s1];
+		if (sensor1->data < 0)
+			return sensor1->data;
+		sensor2 = &data->sensors[s2];
+		if (sensor2->data < 0)
+			return sensor2->data;
+
+		v1 = pmbus_reg2data(data, sensor1);
+		v2 = pmbus_reg2data(data, sensor2);
+		*val = !!(regval && v1 >= v2);
+	}
+	return 0;
+}
+
+static ssize_t pmbus_show_boolean(struct device *dev,
+				  struct device_attribute *da, char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+	struct pmbus_data *data = pmbus_update_device(dev);
+	int val;
+	int err;
+
+	err = pmbus_get_boolean(data, attr->index, &val);
+	if (err)
+		return err;
+	return snprintf(buf, PAGE_SIZE, "%d\n", val);
+}
+
+static ssize_t pmbus_show_sensor(struct device *dev,
+				 struct device_attribute *da, char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+	struct pmbus_data *data = pmbus_update_device(dev);
+	struct pmbus_sensor *sensor;
+
+	sensor = &data->sensors[attr->index];
+	if (sensor->data < 0)
+		return sensor->data;
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", pmbus_reg2data(data, sensor));
+}
+
+static ssize_t pmbus_set_sensor(struct device *dev,
+				struct device_attribute *devattr,
+				const char *buf, size_t count)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct pmbus_data *data = i2c_get_clientdata(client);
+	struct pmbus_sensor *sensor = &data->sensors[attr->index];
+	ssize_t rv = count;
+	long val = 0;
+	int ret;
+	u16 regval;
+
+	if (strict_strtol(buf, 10, &val) < 0)
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+	regval = pmbus_data2reg(data, sensor->class, val);
+	ret = pmbus_write_word_data(client, sensor->page, sensor->reg, regval);
+	if (ret < 0)
+		rv = ret;
+	else
+		data->sensors[attr->index].data = regval;
+	mutex_unlock(&data->update_lock);
+	return rv;
+}
+
+static ssize_t pmbus_show_label(struct device *dev,
+				struct device_attribute *da, char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct pmbus_data *data = i2c_get_clientdata(client);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+
+	return snprintf(buf, PAGE_SIZE, "%s\n",
+			data->labels[attr->index].label);
+}
+
+#define PMBUS_ADD_ATTR(data, _name, _idx, _mode, _type, _show, _set)	\
+do {									\
+	struct sensor_device_attribute *a				\
+	    = &data->_type##s[data->num_##_type##s].attribute;		\
+	BUG_ON(data->num_attributes >= data->max_attributes);		\
+	a->dev_attr.attr.name = _name;					\
+	a->dev_attr.attr.mode = _mode;					\
+	a->dev_attr.show = _show;					\
+	a->dev_attr.store = _set;					\
+	a->index = _idx;						\
+	data->attributes[data->num_attributes] = &a->dev_attr.attr;	\
+	data->num_attributes++;						\
+} while (0)
+
+#define PMBUS_ADD_GET_ATTR(data, _name, _type, _idx)			\
+	PMBUS_ADD_ATTR(data, _name, _idx, S_IRUGO, _type,		\
+		       pmbus_show_##_type,  NULL)
+
+#define PMBUS_ADD_SET_ATTR(data, _name, _type, _idx)			\
+	PMBUS_ADD_ATTR(data, _name, _idx, S_IWUSR | S_IRUGO, _type,	\
+		       pmbus_show_##_type, pmbus_set_##_type)
+
+static void pmbus_add_boolean(struct pmbus_data *data,
+			      const char *name, const char *type, int seq,
+			      int idx)
+{
+	struct pmbus_boolean *boolean;
+
+	BUG_ON(data->num_booleans >= data->max_booleans);
+
+	boolean = &data->booleans[data->num_booleans];
+
+	snprintf(boolean->name, sizeof(boolean->name), "%s%d_%s",
+		 name, seq, type);
+	PMBUS_ADD_GET_ATTR(data, boolean->name, boolean, idx);
+	data->num_booleans++;
+}
+
+static void pmbus_add_boolean_reg(struct pmbus_data *data,
+				  const char *name, const char *type,
+				  int seq, int reg, int bit)
+{
+	pmbus_add_boolean(data, name, type, seq, (reg << 8) | bit);
+}
+
+static void pmbus_add_boolean_cmp(struct pmbus_data *data,
+				  const char *name, const char *type,
+				  int seq, int i1, int i2, int reg, int mask)
+{
+	pmbus_add_boolean(data, name, type, seq,
+			  (i1 << 24) | (i2 << 16) | (reg << 8) | mask);
+}
+
+static void pmbus_add_sensor(struct pmbus_data *data,
+			     const char *name, const char *type, int seq,
+			     int page, int reg, enum pmbus_sensor_classes class,
+			     bool update)
+{
+	struct pmbus_sensor *sensor;
+
+	BUG_ON(data->num_sensors >= data->max_sensors);
+
+	sensor = &data->sensors[data->num_sensors];
+	snprintf(sensor->name, sizeof(sensor->name), "%s%d_%s",
+		 name, seq, type);
+	sensor->page = page;
+	sensor->reg = reg;
+	sensor->class = class;
+	sensor->update = update;
+	if (update)
+		PMBUS_ADD_GET_ATTR(data, sensor->name, sensor,
+				   data->num_sensors);
+	else
+		PMBUS_ADD_SET_ATTR(data, sensor->name, sensor,
+				   data->num_sensors);
+	data->num_sensors++;
+}
+
+static void pmbus_add_label(struct pmbus_data *data,
+			    const char *name, int seq,
+			    const char *lstring, int index)
+{
+	struct pmbus_label *label;
+
+	BUG_ON(data->num_labels >= data->max_labels);
+
+	label = &data->labels[data->num_labels];
+	snprintf(label->name, sizeof(label->name), "%s%d_label", name, seq);
+	if (!index)
+		strncpy(label->label, lstring, sizeof(label->label) - 1);
+	else
+		snprintf(label->label, sizeof(label->label), "%s%d", lstring,
+			 index);
+
+	PMBUS_ADD_GET_ATTR(data, label->name, label, data->num_labels);
+	data->num_labels++;
+}
+
+static const int pmbus_temp_registers[] = {
+	PMBUS_READ_TEMPERATURE_1,
+	PMBUS_READ_TEMPERATURE_2,
+	PMBUS_READ_TEMPERATURE_3
+};
+
+static const int pmbus_temp_flags[] = {
+	PMBUS_HAVE_TEMP,
+	PMBUS_HAVE_TEMP2,
+	PMBUS_HAVE_TEMP3
+};
+
+static const int pmbus_fan_registers[] = {
+	PMBUS_READ_FAN_SPEED_1,
+	PMBUS_READ_FAN_SPEED_2,
+	PMBUS_READ_FAN_SPEED_3,
+	PMBUS_READ_FAN_SPEED_4
+};
+
+static const int pmbus_fan_config_registers[] = {
+	PMBUS_FAN_CONFIG_12,
+	PMBUS_FAN_CONFIG_12,
+	PMBUS_FAN_CONFIG_34,
+	PMBUS_FAN_CONFIG_34
+};
+
+static const int pmbus_fan_status_registers[] = {
+	PMBUS_STATUS_FAN_12,
+	PMBUS_STATUS_FAN_12,
+	PMBUS_STATUS_FAN_34,
+	PMBUS_STATUS_FAN_34
+};
+
+static const u32 pmbus_fan_flags[] = {
+	PMBUS_HAVE_FAN12,
+	PMBUS_HAVE_FAN12,
+	PMBUS_HAVE_FAN34,
+	PMBUS_HAVE_FAN34
+};
+
+static const u32 pmbus_fan_status_flags[] = {
+	PMBUS_HAVE_STATUS_FAN12,
+	PMBUS_HAVE_STATUS_FAN12,
+	PMBUS_HAVE_STATUS_FAN34,
+	PMBUS_HAVE_STATUS_FAN34
+};
+
+/*
+ * Determine maximum number of sensors, booleans, and labels.
+ * To keep things simple, only make a rough high estimate.
+ */
+static void pmbus_find_max_attr(struct i2c_client *client,
+				struct pmbus_data *data)
+{
+	const struct pmbus_driver_info *info = data->info;
+	int page, max_sensors, max_booleans, max_labels;
+
+	max_sensors = PMBUS_MAX_INPUT_SENSORS;
+	max_booleans = PMBUS_MAX_INPUT_BOOLEANS;
+	max_labels = PMBUS_MAX_INPUT_LABELS;
+
+	for (page = 0; page < info->pages; page++) {
+		if (info->func[page] & PMBUS_HAVE_VOUT) {
+			max_sensors += PMBUS_VOUT_SENSORS_PER_PAGE;
+			max_booleans += PMBUS_VOUT_BOOLEANS_PER_PAGE;
+			max_labels++;
+		}
+		if (info->func[page] & PMBUS_HAVE_IOUT) {
+			max_sensors += PMBUS_IOUT_SENSORS_PER_PAGE;
+			max_booleans += PMBUS_IOUT_BOOLEANS_PER_PAGE;
+			max_labels++;
+		}
+		if (info->func[page] & PMBUS_HAVE_POUT) {
+			max_sensors += PMBUS_POUT_SENSORS_PER_PAGE;
+			max_booleans += PMBUS_POUT_BOOLEANS_PER_PAGE;
+			max_labels++;
+		}
+		if (info->func[page] & PMBUS_HAVE_FAN12) {
+			max_sensors += 2 * PMBUS_MAX_SENSORS_PER_FAN;
+			max_booleans += 2 * PMBUS_MAX_BOOLEANS_PER_FAN;
+		}
+		if (info->func[page] & PMBUS_HAVE_FAN34) {
+			max_sensors += 2 * PMBUS_MAX_SENSORS_PER_FAN;
+			max_booleans += 2 * PMBUS_MAX_BOOLEANS_PER_FAN;
+		}
+		if (info->func[page] & PMBUS_HAVE_TEMP) {
+			max_sensors += PMBUS_MAX_SENSORS_PER_TEMP;
+			max_booleans += PMBUS_MAX_BOOLEANS_PER_TEMP;
+		}
+		if (info->func[page] & PMBUS_HAVE_TEMP2) {
+			max_sensors += PMBUS_MAX_SENSORS_PER_TEMP;
+			max_booleans += PMBUS_MAX_BOOLEANS_PER_TEMP;
+		}
+		if (info->func[page] & PMBUS_HAVE_TEMP3) {
+			max_sensors += PMBUS_MAX_SENSORS_PER_TEMP;
+			max_booleans += PMBUS_MAX_BOOLEANS_PER_TEMP;
+		}
+	}
+	data->max_sensors = max_sensors;
+	data->max_booleans = max_booleans;
+	data->max_labels = max_labels;
+	data->max_attributes = max_sensors + max_booleans + max_labels;
+}
+
+/*
+ * Search for attributes. Allocate sensors, booleans, and labels as needed.
+ */
+static void pmbus_find_attributes(struct i2c_client *client,
+				  struct pmbus_data *data)
+{
+	const struct pmbus_driver_info *info = data->info;
+	int page, i0, i1, in_index;
+
+	/*
+	 * Input voltage sensors
+	 */
+	in_index = 1;
+	if (info->func[0] & PMBUS_HAVE_VIN) {
+		bool have_alarm = false;
+
+		i0 = data->num_sensors;
+		pmbus_add_label(data, "in", in_index, "vin", 0);
+		pmbus_add_sensor(data, "in", "input", in_index,
+				 0, PMBUS_READ_VIN, PSC_VOLTAGE_IN, true);
+		if (pmbus_check_word_register(client, 0,
+					      PMBUS_VIN_UV_WARN_LIMIT)) {
+			i1 = data->num_sensors;
+			pmbus_add_sensor(data, "in", "min", in_index,
+					 0, PMBUS_VIN_UV_WARN_LIMIT,
+					 PSC_VOLTAGE_IN, false);
+			if (info->func[0] & PMBUS_HAVE_STATUS_INPUT) {
+				pmbus_add_boolean_reg(data, "in", "min_alarm",
+						      in_index,
+						      PB_STATUS_INPUT_BASE,
+						      PB_VOLTAGE_UV_WARNING);
+				have_alarm = true;
+			}
+		}
+		if (pmbus_check_word_register(client, 0,
+					      PMBUS_VIN_UV_FAULT_LIMIT)) {
+			i1 = data->num_sensors;
+			pmbus_add_sensor(data, "in", "lcrit", in_index,
+					 0, PMBUS_VIN_UV_FAULT_LIMIT,
+					 PSC_VOLTAGE_IN, false);
+			if (info->func[0] & PMBUS_HAVE_STATUS_INPUT) {
+				pmbus_add_boolean_reg(data, "in", "lcrit_alarm",
+						      in_index,
+						      PB_STATUS_INPUT_BASE,
+						      PB_VOLTAGE_UV_FAULT);
+				have_alarm = true;
+			}
+		}
+		if (pmbus_check_word_register(client, 0,
+					      PMBUS_VIN_OV_WARN_LIMIT)) {
+			i1 = data->num_sensors;
+			pmbus_add_sensor(data, "in", "max", in_index,
+					 0, PMBUS_VIN_OV_WARN_LIMIT,
+					 PSC_VOLTAGE_IN, false);
+			if (info->func[0] & PMBUS_HAVE_STATUS_INPUT) {
+				pmbus_add_boolean_reg(data, "in", "max_alarm",
+						      in_index,
+						      PB_STATUS_INPUT_BASE,
+						      PB_VOLTAGE_OV_WARNING);
+				have_alarm = true;
+			}
+		}
+		if (pmbus_check_word_register(client, 0,
+					      PMBUS_VIN_OV_FAULT_LIMIT)) {
+			i1 = data->num_sensors;
+			pmbus_add_sensor(data, "in", "crit", in_index,
+					 0, PMBUS_VIN_OV_FAULT_LIMIT,
+					 PSC_VOLTAGE_IN, false);
+			if (info->func[0] & PMBUS_HAVE_STATUS_INPUT) {
+				pmbus_add_boolean_reg(data, "in", "crit_alarm",
+						      in_index,
+						      PB_STATUS_INPUT_BASE,
+						      PB_VOLTAGE_OV_FAULT);
+				have_alarm = true;
+			}
+		}
+		/*
+		 * Add generic alarm attribute only if there are no individual
+		 * attributes.
+		 */
+		if (!have_alarm)
+			pmbus_add_boolean_reg(data, "in", "alarm",
+					      in_index,
+					      PB_STATUS_BASE,
+					      PB_STATUS_VIN_UV);
+		in_index++;
+	}
+	if (info->func[0] & PMBUS_HAVE_VCAP) {
+		pmbus_add_label(data, "in", in_index, "vcap", 0);
+		pmbus_add_sensor(data, "in", "input", in_index, 0,
+				 PMBUS_READ_VCAP, PSC_VOLTAGE_IN, true);
+		in_index++;
+	}
+
+	/*
+	 * Output voltage sensors
+	 */
+	for (page = 0; page < info->pages; page++) {
+		bool have_alarm = false;
+
+		if (!(info->func[page] & PMBUS_HAVE_VOUT))
+			continue;
+
+		i0 = data->num_sensors;
+		pmbus_add_label(data, "in", in_index, "vout", page + 1);
+		pmbus_add_sensor(data, "in", "input", in_index, page,
+				 PMBUS_READ_VOUT, PSC_VOLTAGE_OUT, true);
+		if (pmbus_check_word_register(client, page,
+					      PMBUS_VOUT_UV_WARN_LIMIT)) {
+			i1 = data->num_sensors;
+			pmbus_add_sensor(data, "in", "min", in_index, page,
+					 PMBUS_VOUT_UV_WARN_LIMIT,
+					 PSC_VOLTAGE_OUT, false);
+			if (info->func[page] & PMBUS_HAVE_STATUS_VOUT) {
+				pmbus_add_boolean_reg(data, "in", "min_alarm",
+						      in_index,
+						      PB_STATUS_VOUT_BASE +
+						      page,
+						      PB_VOLTAGE_UV_WARNING);
+				have_alarm = true;
+			}
+		}
+		if (pmbus_check_word_register(client, page,
+					      PMBUS_VOUT_UV_FAULT_LIMIT)) {
+			i1 = data->num_sensors;
+			pmbus_add_sensor(data, "in", "lcrit", in_index, page,
+					 PMBUS_VOUT_UV_FAULT_LIMIT,
+					 PSC_VOLTAGE_OUT, false);
+			if (info->func[page] & PMBUS_HAVE_STATUS_VOUT) {
+				pmbus_add_boolean_reg(data, "in", "lcrit_alarm",
+						      in_index,
+						      PB_STATUS_VOUT_BASE +
+						      page,
+						      PB_VOLTAGE_UV_FAULT);
+				have_alarm = true;
+			}
+		}
+		if (pmbus_check_word_register(client, page,
+					      PMBUS_VOUT_OV_WARN_LIMIT)) {
+			i1 = data->num_sensors;
+			pmbus_add_sensor(data, "in", "max", in_index, page,
+					 PMBUS_VOUT_OV_WARN_LIMIT,
+					 PSC_VOLTAGE_OUT, false);
+			if (info->func[page] & PMBUS_HAVE_STATUS_VOUT) {
+				pmbus_add_boolean_reg(data, "in", "max_alarm",
+						      in_index,
+						      PB_STATUS_VOUT_BASE +
+						      page,
+						      PB_VOLTAGE_OV_WARNING);
+				have_alarm = true;
+			}
+		}
+		if (pmbus_check_word_register(client, page,
+					      PMBUS_VOUT_OV_FAULT_LIMIT)) {
+			i1 = data->num_sensors;
+			pmbus_add_sensor(data, "in", "crit", in_index, page,
+					 PMBUS_VOUT_OV_FAULT_LIMIT,
+					 PSC_VOLTAGE_OUT, false);
+			if (info->func[page] & PMBUS_HAVE_STATUS_VOUT) {
+				pmbus_add_boolean_reg(data, "in", "crit_alarm",
+						      in_index,
+						      PB_STATUS_VOUT_BASE +
+						      page,
+						      PB_VOLTAGE_OV_FAULT);
+				have_alarm = true;
+			}
+		}
+		/*
+		 * Add generic alarm attribute only if there are no individual
+		 * attributes.
+		 */
+		if (!have_alarm)
+			pmbus_add_boolean_reg(data, "in", "alarm",
+					      in_index,
+					      PB_STATUS_BASE + page,
+					      PB_STATUS_VOUT_OV);
+		in_index++;
+	}
+
+	/*
+	 * Current sensors
+	 */
+
+	/*
+	 * Input current sensors
+	 */
+	in_index = 1;
+	if (info->func[0] & PMBUS_HAVE_IIN) {
+		i0 = data->num_sensors;
+		pmbus_add_label(data, "curr", in_index, "iin", 0);
+		pmbus_add_sensor(data, "curr", "input", in_index,
+				 0, PMBUS_READ_IIN, PSC_CURRENT_IN, true);
+		if (pmbus_check_word_register(client, 0,
+					      PMBUS_IIN_OC_WARN_LIMIT)) {
+			i1 = data->num_sensors;
+			pmbus_add_sensor(data, "curr", "max", in_index,
+					 0, PMBUS_IIN_OC_WARN_LIMIT,
+					 PSC_CURRENT_IN, false);
+			if (info->func[0] & PMBUS_HAVE_STATUS_INPUT) {
+				pmbus_add_boolean_reg(data, "curr", "max_alarm",
+						      in_index,
+						      PB_STATUS_INPUT_BASE,
+						      PB_IIN_OC_WARNING);
+			}
+		}
+		if (pmbus_check_word_register(client, 0,
+					      PMBUS_IIN_OC_FAULT_LIMIT)) {
+			i1 = data->num_sensors;
+			pmbus_add_sensor(data, "curr", "crit", in_index,
+					 0, PMBUS_IIN_OC_FAULT_LIMIT,
+					 PSC_CURRENT_IN, false);
+			if (info->func[0] & PMBUS_HAVE_STATUS_INPUT)
+				pmbus_add_boolean_reg(data, "curr",
+						      "crit_alarm",
+						      in_index,
+						      PB_STATUS_INPUT_BASE,
+						      PB_IIN_OC_FAULT);
+		}
+		in_index++;
+	}
+
+	/*
+	 * Output current sensors
+	 */
+	for (page = 0; page < info->pages; page++) {
+		bool have_alarm = false;
+
+		if (!(info->func[page] & PMBUS_HAVE_IOUT))
+			continue;
+
+		i0 = data->num_sensors;
+		pmbus_add_label(data, "curr", in_index, "iout", page + 1);
+		pmbus_add_sensor(data, "curr", "input", in_index, page,
+				 PMBUS_READ_IOUT, PSC_CURRENT_OUT, true);
+		if (pmbus_check_word_register(client, page,
+					      PMBUS_IOUT_OC_WARN_LIMIT)) {
+			i1 = data->num_sensors;
+			pmbus_add_sensor(data, "curr", "max", in_index, page,
+					 PMBUS_IOUT_OC_WARN_LIMIT,
+					 PSC_CURRENT_OUT, false);
+			if (info->func[page] & PMBUS_HAVE_STATUS_IOUT) {
+				pmbus_add_boolean_reg(data, "curr", "max_alarm",
+						      in_index,
+						      PB_STATUS_IOUT_BASE +
+						      page, PB_IOUT_OC_WARNING);
+				have_alarm = true;
+			}
+		}
+		if (pmbus_check_word_register(client, page,
+					      PMBUS_IOUT_UC_FAULT_LIMIT)) {
+			i1 = data->num_sensors;
+			pmbus_add_sensor(data, "curr", "lcrit", in_index, page,
+					 PMBUS_IOUT_UC_FAULT_LIMIT,
+					 PSC_CURRENT_OUT, false);
+			if (info->func[page] & PMBUS_HAVE_STATUS_IOUT) {
+				pmbus_add_boolean_reg(data, "curr",
+						      "lcrit_alarm",
+						      in_index,
+						      PB_STATUS_IOUT_BASE +
+						      page, PB_IOUT_UC_FAULT);
+				have_alarm = true;
+			}
+		}
+		if (pmbus_check_word_register(client, page,
+					      PMBUS_IOUT_OC_FAULT_LIMIT)) {
+			i1 = data->num_sensors;
+			pmbus_add_sensor(data, "curr", "crit", in_index, page,
+					 PMBUS_IOUT_OC_FAULT_LIMIT,
+					 PSC_CURRENT_OUT, false);
+			if (info->func[page] & PMBUS_HAVE_STATUS_IOUT) {
+				pmbus_add_boolean_reg(data, "curr",
+						      "crit_alarm",
+						      in_index,
+						      PB_STATUS_IOUT_BASE +
+						      page, PB_IOUT_OC_FAULT);
+				have_alarm = true;
+			}
+		}
+		/*
+		 * Add generic alarm attribute only if there are no individual
+		 * attributes.
+		 */
+		if (!have_alarm)
+			pmbus_add_boolean_reg(data, "curr", "alarm",
+					      in_index,
+					      PB_STATUS_BASE + page,
+					      PB_STATUS_IOUT_OC);
+		in_index++;
+	}
+
+	/*
+	 * Power sensors
+	 */
+	/*
+	 * Input Power sensors
+	 */
+	in_index = 1;
+	if (info->func[0] & PMBUS_HAVE_PIN) {
+		i0 = data->num_sensors;
+		pmbus_add_label(data, "power", in_index, "pin", 0);
+		pmbus_add_sensor(data, "power", "input", in_index,
+				 0, PMBUS_READ_PIN, PSC_POWER, true);
+		if (pmbus_check_word_register(client, 0,
+					      PMBUS_PIN_OP_WARN_LIMIT)) {
+			i1 = data->num_sensors;
+			pmbus_add_sensor(data, "power", "max", in_index,
+					 0, PMBUS_PIN_OP_WARN_LIMIT, PSC_POWER,
+					 false);
+			if (info->func[0] & PMBUS_HAVE_STATUS_INPUT)
+				pmbus_add_boolean_reg(data, "power",
+						      "alarm",
+						      in_index,
+						      PB_STATUS_INPUT_BASE,
+						      PB_PIN_OP_WARNING);
+		}
+		in_index++;
+	}
+
+	/*
+	 * Output Power sensors
+	 */
+	for (page = 0; page < info->pages; page++) {
+		bool need_alarm = false;
+
+		if (!(info->func[page] & PMBUS_HAVE_POUT))
+			continue;
+
+		i0 = data->num_sensors;
+		pmbus_add_label(data, "power", in_index, "pout", page + 1);
+		pmbus_add_sensor(data, "power", "input", in_index, page,
+				 PMBUS_READ_POUT, PSC_POWER, true);
+		/*
+		 * Per hwmon sysfs API, power_cap is to be used to limit output
+		 * power.
+		 * We have two registers related to maximum output power,
+		 * PMBUS_POUT_MAX and PMBUS_POUT_OP_WARN_LIMIT.
+		 * PMBUS_POUT_MAX matches the powerX_cap attribute definition.
+		 * There is no attribute in the API to match
+		 * PMBUS_POUT_OP_WARN_LIMIT. We use powerX_max for now.
+		 */
+		if (pmbus_check_word_register(client, page, PMBUS_POUT_MAX)) {
+			i1 = data->num_sensors;
+			pmbus_add_sensor(data, "power", "cap", in_index, page,
+					 PMBUS_POUT_MAX, PSC_POWER, false);
+			need_alarm = true;
+		}
+		if (pmbus_check_word_register(client, page,
+					      PMBUS_POUT_OP_WARN_LIMIT)) {
+			i1 = data->num_sensors;
+			pmbus_add_sensor(data, "power", "max", in_index, page,
+					 PMBUS_POUT_OP_WARN_LIMIT, PSC_POWER,
+					 false);
+			need_alarm = true;
+		}
+		if (need_alarm && (info->func[page] & PMBUS_HAVE_STATUS_IOUT))
+			pmbus_add_boolean_reg(data, "power", "alarm",
+					      in_index,
+					      PB_STATUS_IOUT_BASE + page,
+					      PB_POUT_OP_WARNING
+					      | PB_POWER_LIMITING);
+
+		if (pmbus_check_word_register(client, page,
+					      PMBUS_POUT_OP_FAULT_LIMIT)) {
+			i1 = data->num_sensors;
+			pmbus_add_sensor(data, "power", "crit", in_index, page,
+					 PMBUS_POUT_OP_FAULT_LIMIT, PSC_POWER,
+					 false);
+			if (info->func[page] & PMBUS_HAVE_STATUS_IOUT)
+				pmbus_add_boolean_reg(data, "power",
+						      "crit_alarm",
+						      in_index,
+						      PB_STATUS_IOUT_BASE
+						      + page,
+						      PB_POUT_OP_FAULT);
+		}
+		in_index++;
+	}
+
+	/*
+	 * Temperature sensors
+	 */
+	in_index = 1;
+	for (page = 0; page < info->pages; page++) {
+		int t;
+
+		for (t = 0; t < ARRAY_SIZE(pmbus_temp_registers); t++) {
+			bool have_alarm = false;
+
+			/*
+			 * A PMBus chip may support any combination of
+			 * temperature registers on any page. So we can not
+			 * abort after a failure to detect a register, but have
+			 * to continue checking for all registers on all pages.
+			 */
+			if (!(info->func[page] & pmbus_temp_flags[t]))
+				continue;
+
+			if (!pmbus_check_word_register
+			    (client, page, pmbus_temp_registers[t]))
+				continue;
+
+			i0 = data->num_sensors;
+			pmbus_add_sensor(data, "temp", "input", in_index, page,
+					 pmbus_temp_registers[t],
+					 PSC_TEMPERATURE, true);
+
+			/*
+			 * PMBus provides only one status register for TEMP1-3.
+			 * Thus, we can not use the status register to determine
+			 * which of the three sensors actually caused an alarm.
+			 * Always compare current temperature against the limit
+			 * registers to determine alarm conditions for a
+			 * specific sensor.
+			 *
+			 * Since there is only one set of limit registers for
+			 * up to three temperature sensors, we need to update
+			 * all limit registers after the limit was changed for
+			 * one of the sensors. This ensures that correct limits
+			 * are reported for all temperature sensors.
+			 */
+			if (pmbus_check_word_register
+			    (client, page, PMBUS_UT_WARN_LIMIT)) {
+				i1 = data->num_sensors;
+				pmbus_add_sensor(data, "temp", "min", in_index,
+						 page, PMBUS_UT_WARN_LIMIT,
+						 PSC_TEMPERATURE, true);
+				if (info->func[page] & PMBUS_HAVE_STATUS_TEMP) {
+					pmbus_add_boolean_cmp(data, "temp",
+						"min_alarm", in_index, i1, i0,
+						PB_STATUS_TEMP_BASE + page,
+						PB_TEMP_UT_WARNING);
+					have_alarm = true;
+				}
+			}
+			if (pmbus_check_word_register(client, page,
+						      PMBUS_UT_FAULT_LIMIT)) {
+				i1 = data->num_sensors;
+				pmbus_add_sensor(data, "temp", "lcrit",
+						 in_index, page,
+						 PMBUS_UT_FAULT_LIMIT,
+						 PSC_TEMPERATURE, true);
+				if (info->func[page] & PMBUS_HAVE_STATUS_TEMP) {
+					pmbus_add_boolean_cmp(data, "temp",
+						"lcrit_alarm", in_index, i1, i0,
+						PB_STATUS_TEMP_BASE + page,
+						PB_TEMP_UT_FAULT);
+					have_alarm = true;
+				}
+			}
+			if (pmbus_check_word_register
+			    (client, page, PMBUS_OT_WARN_LIMIT)) {
+				i1 = data->num_sensors;
+				pmbus_add_sensor(data, "temp", "max", in_index,
+						 page, PMBUS_OT_WARN_LIMIT,
+						 PSC_TEMPERATURE, true);
+				if (info->func[page] & PMBUS_HAVE_STATUS_TEMP) {
+					pmbus_add_boolean_cmp(data, "temp",
+						"max_alarm", in_index, i0, i1,
+						PB_STATUS_TEMP_BASE + page,
+						PB_TEMP_OT_WARNING);
+					have_alarm = true;
+				}
+			}
+			if (pmbus_check_word_register(client, page,
+						      PMBUS_OT_FAULT_LIMIT)) {
+				i1 = data->num_sensors;
+				pmbus_add_sensor(data, "temp", "crit", in_index,
+						 page, PMBUS_OT_FAULT_LIMIT,
+						 PSC_TEMPERATURE, true);
+				if (info->func[page] & PMBUS_HAVE_STATUS_TEMP) {
+					pmbus_add_boolean_cmp(data, "temp",
+						"crit_alarm", in_index, i0, i1,
+						PB_STATUS_TEMP_BASE + page,
+						PB_TEMP_OT_FAULT);
+					have_alarm = true;
+				}
+			}
+			/*
+			 * Last resort - we were not able to create any alarm
+			 * registers. Report alarm for all sensors using the
+			 * status register temperature alarm bit.
+			 */
+			if (!have_alarm)
+				pmbus_add_boolean_reg(data, "temp", "alarm",
+						      in_index,
+						      PB_STATUS_BASE + page,
+						      PB_STATUS_TEMPERATURE);
+			in_index++;
+		}
+	}
+
+	/*
+	 * Fans
+	 */
+	in_index = 1;
+	for (page = 0; page < info->pages; page++) {
+		int f;
+
+		for (f = 0; f < ARRAY_SIZE(pmbus_fan_registers); f++) {
+			int regval;
+
+			if (!(info->func[page] & pmbus_fan_flags[f]))
+				break;
+
+			if (!pmbus_check_word_register(client, page,
+						       pmbus_fan_registers[f])
+			    || !pmbus_check_byte_register(client, page,
+						pmbus_fan_config_registers[f]))
+				break;
+
+			/*
+			 * Skip fan if not installed.
+			 * Each fan configuration register covers multiple fans,
+			 * so we have to do some magic.
+			 */
+			regval = pmbus_read_byte_data(client, page,
+				pmbus_fan_config_registers[f]);
+			if (regval < 0 ||
+			    (!(regval & (PB_FAN_1_INSTALLED >> ((f & 1) * 4)))))
+				continue;
+
+			i0 = data->num_sensors;
+			pmbus_add_sensor(data, "fan", "input", in_index, page,
+					 pmbus_fan_registers[f], PSC_FAN, true);
+
+			/*
+			 * Each fan status register covers multiple fans,
+			 * so we have to do some magic.
+			 */
+			if ((info->func[page] & pmbus_fan_status_flags[f]) &&
+			    pmbus_check_byte_register(client,
+					page, pmbus_fan_status_registers[f])) {
+				int base;
+
+				if (f > 1)	/* fan 3, 4 */
+					base = PB_STATUS_FAN34_BASE + page;
+				else
+					base = PB_STATUS_FAN_BASE + page;
+				pmbus_add_boolean_reg(data, "fan", "alarm",
+					in_index, base,
+					PB_FAN_FAN1_WARNING >> (f & 1));
+				pmbus_add_boolean_reg(data, "fan", "fault",
+					in_index, base,
+					PB_FAN_FAN1_FAULT >> (f & 1));
+			}
+			in_index++;
+		}
+	}
+}
+
+/*
+ * Identify chip parameters.
+ * This function is called for all chips.
+ */
+static int pmbus_identify_common(struct i2c_client *client,
+				 struct pmbus_data *data)
+{
+	int vout_mode = -1, exponent;
+
+	if (pmbus_check_byte_register(client, 0, PMBUS_VOUT_MODE))
+		vout_mode = pmbus_read_byte_data(client, 0, PMBUS_VOUT_MODE);
+	if (vout_mode >= 0 && vout_mode != 0xff) {
+		/*
+		 * Not all chips support the VOUT_MODE command,
+		 * so a failure to read it is not an error.
+		 */
+		switch (vout_mode >> 5) {
+		case 0:	/* linear mode      */
+			if (data->info->direct[PSC_VOLTAGE_OUT])
+				return -ENODEV;
+
+			exponent = vout_mode & 0x1f;
+			/* and sign-extend it */
+			if (exponent & 0x10)
+				exponent |= ~0x1f;
+			data->exponent = exponent;
+			break;
+		case 2:	/* direct mode      */
+			if (!data->info->direct[PSC_VOLTAGE_OUT])
+				return -ENODEV;
+			break;
+		default:
+			return -ENODEV;
+		}
+	}
+
+	/* Determine maximum number of sensors, booleans, and labels */
+	pmbus_find_max_attr(client, data);
+	pmbus_clear_fault_page(client, 0);
+	return 0;
+}
+
+int pmbus_do_probe(struct i2c_client *client, const struct i2c_device_id *id,
+		   struct pmbus_driver_info *info)
+{
+	const struct pmbus_platform_data *pdata = client->dev.platform_data;
+	struct pmbus_data *data;
+	int ret;
+
+	if (!info) {
+		dev_err(&client->dev, "Missing chip information");
+		return -ENODEV;
+	}
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WRITE_BYTE
+				     | I2C_FUNC_SMBUS_BYTE_DATA
+				     | I2C_FUNC_SMBUS_WORD_DATA))
+		return -ENODEV;
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data) {
+		dev_err(&client->dev, "No memory to allocate driver data\n");
+		return -ENOMEM;
+	}
+
+	i2c_set_clientdata(client, data);
+	mutex_init(&data->update_lock);
+
+	/*
+	 * Bail out if status register or PMBus revision register
+	 * does not exist.
+	 */
+	if (i2c_smbus_read_byte_data(client, PMBUS_STATUS_BYTE) < 0
+	    || i2c_smbus_read_byte_data(client, PMBUS_REVISION) < 0) {
+		dev_err(&client->dev,
+			"Status or revision register not found\n");
+		ret = -ENODEV;
+		goto out_data;
+	}
+
+	if (pdata)
+		data->flags = pdata->flags;
+	data->info = info;
+
+	pmbus_clear_faults(client);
+
+	if (info->identify) {
+		ret = (*info->identify)(client, info);
+		if (ret < 0) {
+			dev_err(&client->dev, "Chip identification failed\n");
+			goto out_data;
+		}
+	}
+
+	if (info->pages <= 0 || info->pages > PMBUS_PAGES) {
+		dev_err(&client->dev, "Bad number of PMBus pages: %d\n",
+			info->pages);
+		ret = -EINVAL;
+		goto out_data;
+	}
+	/*
+	 * Bail out if more than one page was configured, but we can not
+	 * select the highest page. This is an indication that the wrong
+	 * chip type was selected. Better bail out now than keep
+	 * returning errors later on.
+	 */
+	if (info->pages > 1 && pmbus_set_page(client, info->pages - 1) < 0) {
+		dev_err(&client->dev, "Failed to select page %d\n",
+			info->pages - 1);
+		ret = -EINVAL;
+		goto out_data;
+	}
+
+	ret = pmbus_identify_common(client, data);
+	if (ret < 0) {
+		dev_err(&client->dev, "Failed to identify chip capabilities\n");
+		goto out_data;
+	}
+
+	ret = -ENOMEM;
+	data->sensors = kzalloc(sizeof(struct pmbus_sensor) * data->max_sensors,
+				GFP_KERNEL);
+	if (!data->sensors) {
+		dev_err(&client->dev, "No memory to allocate sensor data\n");
+		goto out_data;
+	}
+
+	data->booleans = kzalloc(sizeof(struct pmbus_boolean)
+				 * data->max_booleans, GFP_KERNEL);
+	if (!data->booleans) {
+		dev_err(&client->dev, "No memory to allocate boolean data\n");
+		goto out_sensors;
+	}
+
+	data->labels = kzalloc(sizeof(struct pmbus_label) * data->max_labels,
+			       GFP_KERNEL);
+	if (!data->labels) {
+		dev_err(&client->dev, "No memory to allocate label data\n");
+		goto out_booleans;
+	}
+
+	data->attributes = kzalloc(sizeof(struct attribute *)
+				   * data->max_attributes, GFP_KERNEL);
+	if (!data->attributes) {
+		dev_err(&client->dev, "No memory to allocate attribute data\n");
+		goto out_labels;
+	}
+
+	pmbus_find_attributes(client, data);
+
+	/*
+	 * If there are no attributes, something is wrong.
+	 * Bail out instead of trying to register nothing.
+	 */
+	if (!data->num_attributes) {
+		dev_err(&client->dev, "No attributes found\n");
+		ret = -ENODEV;
+		goto out_attributes;
+	}
+
+	/* Register sysfs hooks */
+	data->group.attrs = data->attributes;
+	ret = sysfs_create_group(&client->dev.kobj, &data->group);
+	if (ret) {
+		dev_err(&client->dev, "Failed to create sysfs entries\n");
+		goto out_attributes;
+	}
+	data->hwmon_dev = hwmon_device_register(&client->dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		ret = PTR_ERR(data->hwmon_dev);
+		dev_err(&client->dev, "Failed to register hwmon device\n");
+		goto out_hwmon_device_register;
+	}
+	return 0;
+
+out_hwmon_device_register:
+	sysfs_remove_group(&client->dev.kobj, &data->group);
+out_attributes:
+	kfree(data->attributes);
+out_labels:
+	kfree(data->labels);
+out_booleans:
+	kfree(data->booleans);
+out_sensors:
+	kfree(data->sensors);
+out_data:
+	kfree(data);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(pmbus_do_probe);
+
+int pmbus_do_remove(struct i2c_client *client)
+{
+	struct pmbus_data *data = i2c_get_clientdata(client);
+	hwmon_device_unregister(data->hwmon_dev);
+	sysfs_remove_group(&client->dev.kobj, &data->group);
+	kfree(data->attributes);
+	kfree(data->labels);
+	kfree(data->booleans);
+	kfree(data->sensors);
+	kfree(data);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(pmbus_do_remove);
+
+MODULE_AUTHOR("Guenter Roeck");
+MODULE_DESCRIPTION("PMBus core driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c
index 073eabedc432..f2b377c56a3a 100644
--- a/drivers/hwmon/w83627ehf.c
+++ b/drivers/hwmon/w83627ehf.c
@@ -1,11 +1,12 @@
 /*
     w83627ehf - Driver for the hardware monitoring functionality of
-                the Winbond W83627EHF Super-I/O chip
+		the Winbond W83627EHF Super-I/O chip
     Copyright (C) 2005  Jean Delvare <khali@linux-fr.org>
     Copyright (C) 2006  Yuan Mu (Winbond),
-                        Rudolf Marek <r.marek@assembler.cz>
-                        David Hubbard <david.c.hubbard@gmail.com>
+			Rudolf Marek <r.marek@assembler.cz>
+			David Hubbard <david.c.hubbard@gmail.com>
 			Daniel J Blueman <daniel.blueman@gmail.com>
+    Copyright (C) 2010  Sheng-Yuan Huang (Nuvoton) (PS00)
 
     Shamelessly ripped from the w83627hf driver
     Copyright (C) 2003  Mark Studebaker
@@ -35,11 +36,13 @@
 
     Chip        #vin    #fan    #pwm    #temp  chip IDs       man ID
     w83627ehf   10      5       4       3      0x8850 0x88    0x5ca3
-                                               0x8860 0xa1
+					       0x8860 0xa1
     w83627dhg    9      5       4       3      0xa020 0xc1    0x5ca3
     w83627dhg-p  9      5       4       3      0xb070 0xc1    0x5ca3
     w83667hg     9      5       3       3      0xa510 0xc1    0x5ca3
-    w83667hg-b   9      5       3       3      0xb350 0xc1    0x5ca3
+    w83667hg-b   9      5       3       4      0xb350 0xc1    0x5ca3
+    nct6775f     9      4       3       9      0xb470 0xc1    0x5ca3
+    nct6776f     9      5       3       9      0xC330 0xc1    0x5ca3
 */
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
@@ -58,21 +61,28 @@
 #include <linux/io.h>
 #include "lm75.h"
 
-enum kinds { w83627ehf, w83627dhg, w83627dhg_p, w83667hg, w83667hg_b };
+enum kinds { w83627ehf, w83627dhg, w83627dhg_p, w83667hg, w83667hg_b, nct6775,
+	nct6776 };
 
 /* used to set data->name = w83627ehf_device_names[data->sio_kind] */
-static const char * w83627ehf_device_names[] = {
+static const char * const w83627ehf_device_names[] = {
 	"w83627ehf",
 	"w83627dhg",
 	"w83627dhg",
 	"w83667hg",
 	"w83667hg",
+	"nct6775",
+	"nct6776",
 };
 
 static unsigned short force_id;
 module_param(force_id, ushort, 0);
 MODULE_PARM_DESC(force_id, "Override the detected device ID");
 
+static unsigned short fan_debounce;
+module_param(fan_debounce, ushort, 0);
+MODULE_PARM_DESC(fan_debounce, "Enable debouncing for fan RPM signal");
+
 #define DRVNAME "w83627ehf"
 
 /*
@@ -80,7 +90,7 @@ MODULE_PARM_DESC(force_id, "Override the detected device ID");
  */
 
 #define W83627EHF_LD_HWM	0x0b
-#define W83667HG_LD_VID 	0x0d
+#define W83667HG_LD_VID		0x0d
 
 #define SIO_REG_LDSEL		0x07	/* Logical device select */
 #define SIO_REG_DEVID		0x20	/* Device ID (2 bytes) */
@@ -94,8 +104,10 @@ MODULE_PARM_DESC(force_id, "Override the detected device ID");
 #define SIO_W83627EHG_ID	0x8860
 #define SIO_W83627DHG_ID	0xa020
 #define SIO_W83627DHG_P_ID	0xb070
-#define SIO_W83667HG_ID 	0xa510
+#define SIO_W83667HG_ID		0xa510
 #define SIO_W83667HG_B_ID	0xb350
+#define SIO_NCT6775_ID		0xb470
+#define SIO_NCT6776_ID		0xc330
 #define SIO_ID_MASK		0xFFF0
 
 static inline void
@@ -138,7 +150,7 @@ superio_exit(int ioreg)
  * ISA constants
  */
 
-#define IOREGION_ALIGNMENT	~7
+#define IOREGION_ALIGNMENT	(~7)
 #define IOREGION_OFFSET		5
 #define IOREGION_LENGTH		2
 #define ADDR_REG_OFFSET		0
@@ -164,13 +176,10 @@ static const u16 W83627EHF_REG_FAN_MIN[] = { 0x3b, 0x3c, 0x3d, 0x3e, 0x55c };
 #define W83627EHF_REG_IN(nr)		((nr < 7) ? (0x20 + (nr)) : \
 					 (0x550 + (nr) - 7))
 
-#define W83627EHF_REG_TEMP1		0x27
-#define W83627EHF_REG_TEMP1_HYST	0x3a
-#define W83627EHF_REG_TEMP1_OVER	0x39
-static const u16 W83627EHF_REG_TEMP[] = { 0x150, 0x250 };
-static const u16 W83627EHF_REG_TEMP_HYST[] = { 0x153, 0x253 };
-static const u16 W83627EHF_REG_TEMP_OVER[] = { 0x155, 0x255 };
-static const u16 W83627EHF_REG_TEMP_CONFIG[] = { 0x152, 0x252 };
+static const u16 W83627EHF_REG_TEMP[] = { 0x27, 0x150, 0x250, 0x7e };
+static const u16 W83627EHF_REG_TEMP_HYST[] = { 0x3a, 0x153, 0x253, 0 };
+static const u16 W83627EHF_REG_TEMP_OVER[] = { 0x39, 0x155, 0x255, 0 };
+static const u16 W83627EHF_REG_TEMP_CONFIG[] = { 0, 0x152, 0x252, 0 };
 
 /* Fan clock dividers are spread over the following five registers */
 #define W83627EHF_REG_FANDIV1		0x47
@@ -179,6 +188,11 @@ static const u16 W83627EHF_REG_TEMP_CONFIG[] = { 0x152, 0x252 };
 #define W83627EHF_REG_DIODE		0x59
 #define W83627EHF_REG_SMI_OVT		0x4C
 
+/* NCT6775F has its own fan divider registers */
+#define NCT6775_REG_FANDIV1		0x506
+#define NCT6775_REG_FANDIV2		0x507
+#define NCT6775_REG_FAN_DEBOUNCE	0xf0
+
 #define W83627EHF_REG_ALARM1		0x459
 #define W83627EHF_REG_ALARM2		0x45A
 #define W83627EHF_REG_ALARM3		0x45B
@@ -199,22 +213,123 @@ static const u8 W83627EHF_PWM_MODE_SHIFT[] = { 0, 1, 0, 6 };
 static const u8 W83627EHF_PWM_ENABLE_SHIFT[] = { 2, 4, 1, 4 };
 
 /* FAN Duty Cycle, be used to control */
-static const u8 W83627EHF_REG_PWM[] = { 0x01, 0x03, 0x11, 0x61 };
-static const u8 W83627EHF_REG_TARGET[] = { 0x05, 0x06, 0x13, 0x63 };
+static const u16 W83627EHF_REG_PWM[] = { 0x01, 0x03, 0x11, 0x61 };
+static const u16 W83627EHF_REG_TARGET[] = { 0x05, 0x06, 0x13, 0x63 };
 static const u8 W83627EHF_REG_TOLERANCE[] = { 0x07, 0x07, 0x14, 0x62 };
 
 /* Advanced Fan control, some values are common for all fans */
-static const u8 W83627EHF_REG_FAN_START_OUTPUT[] = { 0x0a, 0x0b, 0x16, 0x65 };
-static const u8 W83627EHF_REG_FAN_STOP_OUTPUT[] = { 0x08, 0x09, 0x15, 0x64 };
-static const u8 W83627EHF_REG_FAN_STOP_TIME[] = { 0x0c, 0x0d, 0x17, 0x66 };
+static const u16 W83627EHF_REG_FAN_START_OUTPUT[] = { 0x0a, 0x0b, 0x16, 0x65 };
+static const u16 W83627EHF_REG_FAN_STOP_OUTPUT[] = { 0x08, 0x09, 0x15, 0x64 };
+static const u16 W83627EHF_REG_FAN_STOP_TIME[] = { 0x0c, 0x0d, 0x17, 0x66 };
 
-static const u8 W83627EHF_REG_FAN_MAX_OUTPUT_COMMON[]
+static const u16 W83627EHF_REG_FAN_MAX_OUTPUT_COMMON[]
 						= { 0xff, 0x67, 0xff, 0x69 };
-static const u8 W83627EHF_REG_FAN_STEP_OUTPUT_COMMON[]
+static const u16 W83627EHF_REG_FAN_STEP_OUTPUT_COMMON[]
 						= { 0xff, 0x68, 0xff, 0x6a };
 
-static const u8 W83627EHF_REG_FAN_MAX_OUTPUT_W83667_B[] = { 0x67, 0x69, 0x6b };
-static const u8 W83627EHF_REG_FAN_STEP_OUTPUT_W83667_B[] = { 0x68, 0x6a, 0x6c };
+static const u16 W83627EHF_REG_FAN_MAX_OUTPUT_W83667_B[] = { 0x67, 0x69, 0x6b };
+static const u16 W83627EHF_REG_FAN_STEP_OUTPUT_W83667_B[]
+						= { 0x68, 0x6a, 0x6c };
+
+static const u16 NCT6775_REG_TARGET[] = { 0x101, 0x201, 0x301 };
+static const u16 NCT6775_REG_FAN_MODE[] = { 0x102, 0x202, 0x302 };
+static const u16 NCT6775_REG_FAN_STOP_OUTPUT[] = { 0x105, 0x205, 0x305 };
+static const u16 NCT6775_REG_FAN_START_OUTPUT[] = { 0x106, 0x206, 0x306 };
+static const u16 NCT6775_REG_FAN_STOP_TIME[] = { 0x107, 0x207, 0x307 };
+static const u16 NCT6775_REG_PWM[] = { 0x109, 0x209, 0x309 };
+static const u16 NCT6775_REG_FAN_MAX_OUTPUT[] = { 0x10a, 0x20a, 0x30a };
+static const u16 NCT6775_REG_FAN_STEP_OUTPUT[] = { 0x10b, 0x20b, 0x30b };
+static const u16 NCT6775_REG_FAN[] = { 0x630, 0x632, 0x634, 0x636, 0x638 };
+static const u16 NCT6776_REG_FAN_MIN[] = { 0x63a, 0x63c, 0x63e, 0x640, 0x642};
+
+static const u16 NCT6775_REG_TEMP[]
+	= { 0x27, 0x150, 0x250, 0x73, 0x75, 0x77, 0x62b, 0x62c, 0x62d };
+static const u16 NCT6775_REG_TEMP_CONFIG[]
+	= { 0, 0x152, 0x252, 0, 0, 0, 0x628, 0x629, 0x62A };
+static const u16 NCT6775_REG_TEMP_HYST[]
+	= { 0x3a, 0x153, 0x253, 0, 0, 0, 0x673, 0x678, 0x67D };
+static const u16 NCT6775_REG_TEMP_OVER[]
+	= { 0x39, 0x155, 0x255, 0, 0, 0, 0x672, 0x677, 0x67C };
+static const u16 NCT6775_REG_TEMP_SOURCE[]
+	= { 0x621, 0x622, 0x623, 0x100, 0x200, 0x300, 0x624, 0x625, 0x626 };
+
+static const char *const w83667hg_b_temp_label[] = {
+	"SYSTIN",
+	"CPUTIN",
+	"AUXTIN",
+	"AMDTSI",
+	"PECI Agent 1",
+	"PECI Agent 2",
+	"PECI Agent 3",
+	"PECI Agent 4"
+};
+
+static const char *const nct6775_temp_label[] = {
+	"",
+	"SYSTIN",
+	"CPUTIN",
+	"AUXTIN",
+	"AMD SB-TSI",
+	"PECI Agent 0",
+	"PECI Agent 1",
+	"PECI Agent 2",
+	"PECI Agent 3",
+	"PECI Agent 4",
+	"PECI Agent 5",
+	"PECI Agent 6",
+	"PECI Agent 7",
+	"PCH_CHIP_CPU_MAX_TEMP",
+	"PCH_CHIP_TEMP",
+	"PCH_CPU_TEMP",
+	"PCH_MCH_TEMP",
+	"PCH_DIM0_TEMP",
+	"PCH_DIM1_TEMP",
+	"PCH_DIM2_TEMP",
+	"PCH_DIM3_TEMP"
+};
+
+static const char *const nct6776_temp_label[] = {
+	"",
+	"SYSTIN",
+	"CPUTIN",
+	"AUXTIN",
+	"SMBUSMASTER 0",
+	"SMBUSMASTER 1",
+	"SMBUSMASTER 2",
+	"SMBUSMASTER 3",
+	"SMBUSMASTER 4",
+	"SMBUSMASTER 5",
+	"SMBUSMASTER 6",
+	"SMBUSMASTER 7",
+	"PECI Agent 0",
+	"PECI Agent 1",
+	"PCH_CHIP_CPU_MAX_TEMP",
+	"PCH_CHIP_TEMP",
+	"PCH_CPU_TEMP",
+	"PCH_MCH_TEMP",
+	"PCH_DIM0_TEMP",
+	"PCH_DIM1_TEMP",
+	"PCH_DIM2_TEMP",
+	"PCH_DIM3_TEMP",
+	"BYTE_TEMP"
+};
+
+#define NUM_REG_TEMP	ARRAY_SIZE(NCT6775_REG_TEMP)
+
+static inline int is_word_sized(u16 reg)
+{
+	return ((((reg & 0xff00) == 0x100
+	      || (reg & 0xff00) == 0x200)
+	     && ((reg & 0x00ff) == 0x50
+	      || (reg & 0x00ff) == 0x53
+	      || (reg & 0x00ff) == 0x55))
+	     || (reg & 0xfff0) == 0x630
+	     || reg == 0x640 || reg == 0x642
+	     || ((reg & 0xfff0) == 0x650
+		 && (reg & 0x000f) >= 0x06)
+	     || reg == 0x73 || reg == 0x75 || reg == 0x77
+		);
+}
 
 /*
  * Conversions
@@ -232,12 +347,36 @@ static inline u8 step_time_to_reg(unsigned int msec, u8 mode)
 						(msec + 200) / 400), 1, 255);
 }
 
-static inline unsigned int
-fan_from_reg(u8 reg, unsigned int div)
+static unsigned int fan_from_reg8(u16 reg, unsigned int divreg)
 {
 	if (reg == 0 || reg == 255)
 		return 0;
-	return 1350000U / (reg * div);
+	return 1350000U / (reg << divreg);
+}
+
+static unsigned int fan_from_reg13(u16 reg, unsigned int divreg)
+{
+	if ((reg & 0xff1f) == 0xff1f)
+		return 0;
+
+	reg = (reg & 0x1f) | ((reg & 0xff00) >> 3);
+
+	if (reg == 0)
+		return 0;
+
+	return 1350000U / reg;
+}
+
+static unsigned int fan_from_reg16(u16 reg, unsigned int divreg)
+{
+	if (reg == 0 || reg == 0xffff)
+		return 0;
+
+	/*
+	 * Even though the registers are 16 bit wide, the fan divisor
+	 * still applies.
+	 */
+	return 1350000U / (reg << divreg);
 }
 
 static inline unsigned int
@@ -247,21 +386,19 @@ div_from_reg(u8 reg)
 }
 
 static inline int
-temp1_from_reg(s8 reg)
+temp_from_reg(u16 reg, s16 regval)
 {
-	return reg * 1000;
+	if (is_word_sized(reg))
+		return LM75_TEMP_FROM_REG(regval);
+	return regval * 1000;
 }
 
-static inline s8
-temp1_to_reg(long temp, int min, int max)
+static inline u16
+temp_to_reg(u16 reg, long temp)
 {
-	if (temp <= min)
-		return min / 1000;
-	if (temp >= max)
-		return max / 1000;
-	if (temp < 0)
-		return (temp - 500) / 1000;
-	return (temp + 500) / 1000;
+	if (is_word_sized(reg))
+		return LM75_TEMP_TO_REG(temp);
+	return DIV_ROUND_CLOSEST(SENSORS_LIMIT(temp, -127000, 128000), 1000);
 }
 
 /* Some of analog inputs have internal scaling (2x), 8mV is ADC LSB */
@@ -275,7 +412,8 @@ static inline long in_from_reg(u8 reg, u8 nr)
 
 static inline u8 in_to_reg(u32 val, u8 nr)
 {
-	return SENSORS_LIMIT(((val + (scale_in[nr] / 2)) / scale_in[nr]), 0, 255);
+	return SENSORS_LIMIT(((val + (scale_in[nr] / 2)) / scale_in[nr]), 0,
+			     255);
 }
 
 /*
@@ -289,38 +427,57 @@ struct w83627ehf_data {
 	struct device *hwmon_dev;
 	struct mutex lock;
 
-	const u8 *REG_FAN_START_OUTPUT;
-	const u8 *REG_FAN_STOP_OUTPUT;
-	const u8 *REG_FAN_MAX_OUTPUT;
-	const u8 *REG_FAN_STEP_OUTPUT;
+	u16 reg_temp[NUM_REG_TEMP];
+	u16 reg_temp_over[NUM_REG_TEMP];
+	u16 reg_temp_hyst[NUM_REG_TEMP];
+	u16 reg_temp_config[NUM_REG_TEMP];
+	u8 temp_src[NUM_REG_TEMP];
+	const char * const *temp_label;
+
+	const u16 *REG_PWM;
+	const u16 *REG_TARGET;
+	const u16 *REG_FAN;
+	const u16 *REG_FAN_MIN;
+	const u16 *REG_FAN_START_OUTPUT;
+	const u16 *REG_FAN_STOP_OUTPUT;
+	const u16 *REG_FAN_STOP_TIME;
+	const u16 *REG_FAN_MAX_OUTPUT;
+	const u16 *REG_FAN_STEP_OUTPUT;
+
+	unsigned int (*fan_from_reg)(u16 reg, unsigned int divreg);
+	unsigned int (*fan_from_reg_min)(u16 reg, unsigned int divreg);
 
 	struct mutex update_lock;
 	char valid;		/* !=0 if following fields are valid */
 	unsigned long last_updated;	/* In jiffies */
 
 	/* Register values */
+	u8 bank;		/* current register bank */
 	u8 in_num;		/* number of in inputs we have */
 	u8 in[10];		/* Register value */
 	u8 in_max[10];		/* Register value */
 	u8 in_min[10];		/* Register value */
-	u8 fan[5];
-	u8 fan_min[5];
+	unsigned int rpm[5];
+	u16 fan_min[5];
 	u8 fan_div[5];
 	u8 has_fan;		/* some fan inputs can be disabled */
+	u8 has_fan_min;		/* some fans don't have min register */
+	bool has_fan_div;
 	u8 temp_type[3];
-	s8 temp1;
-	s8 temp1_max;
-	s8 temp1_max_hyst;
-	s16 temp[2];
-	s16 temp_max[2];
-	s16 temp_max_hyst[2];
+	s16 temp[9];
+	s16 temp_max[9];
+	s16 temp_max_hyst[9];
 	u32 alarms;
 
 	u8 pwm_mode[4]; /* 0->DC variable voltage, 1->PWM variable duty cycle */
 	u8 pwm_enable[4]; /* 1->manual
 			     2->thermal cruise mode (also called SmartFan I)
 			     3->fan speed cruise mode
-			     4->variable thermal cruise (also called SmartFan III) */
+			     4->variable thermal cruise (also called
+				SmartFan III)
+			     5->enhanced variable thermal cruise (also called
+				SmartFan IV) */
+	u8 pwm_enable_orig[4];	/* original value of pwm_enable */
 	u8 pwm_num;		/* number of pwm */
 	u8 pwm[4];
 	u8 target_temp[4];
@@ -335,7 +492,7 @@ struct w83627ehf_data {
 	u8 vid;
 	u8 vrm;
 
-	u8 temp3_disable;
+	u16 have_temp;
 	u8 in6_skip;
 };
 
@@ -344,30 +501,19 @@ struct w83627ehf_sio_data {
 	enum kinds kind;
 };
 
-static inline int is_word_sized(u16 reg)
-{
-	return (((reg & 0xff00) == 0x100
-	      || (reg & 0xff00) == 0x200)
-	     && ((reg & 0x00ff) == 0x50
-	      || (reg & 0x00ff) == 0x53
-	      || (reg & 0x00ff) == 0x55));
-}
-
-/* Registers 0x50-0x5f are banked */
+/*
+ * On older chips, only registers 0x50-0x5f are banked.
+ * On more recent chips, all registers are banked.
+ * Assume that is the case and set the bank number for each access.
+ * Cache the bank number so it only needs to be set if it changes.
+ */
 static inline void w83627ehf_set_bank(struct w83627ehf_data *data, u16 reg)
 {
-	if ((reg & 0x00f0) == 0x50) {
+	u8 bank = reg >> 8;
+	if (data->bank != bank) {
 		outb_p(W83627EHF_REG_BANK, data->addr + ADDR_REG_OFFSET);
-		outb_p(reg >> 8, data->addr + DATA_REG_OFFSET);
-	}
-}
-
-/* Not strictly necessary, but play it safe for now */
-static inline void w83627ehf_reset_bank(struct w83627ehf_data *data, u16 reg)
-{
-	if (reg & 0xff00) {
-		outb_p(W83627EHF_REG_BANK, data->addr + ADDR_REG_OFFSET);
-		outb_p(0, data->addr + DATA_REG_OFFSET);
+		outb_p(bank, data->addr + DATA_REG_OFFSET);
+		data->bank = bank;
 	}
 }
 
@@ -385,14 +531,13 @@ static u16 w83627ehf_read_value(struct w83627ehf_data *data, u16 reg)
 		       data->addr + ADDR_REG_OFFSET);
 		res = (res << 8) + inb_p(data->addr + DATA_REG_OFFSET);
 	}
-	w83627ehf_reset_bank(data, reg);
 
 	mutex_unlock(&data->lock);
-
 	return res;
 }
 
-static int w83627ehf_write_value(struct w83627ehf_data *data, u16 reg, u16 value)
+static int w83627ehf_write_value(struct w83627ehf_data *data, u16 reg,
+				 u16 value)
 {
 	int word_sized = is_word_sized(reg);
 
@@ -406,13 +551,40 @@ static int w83627ehf_write_value(struct w83627ehf_data *data, u16 reg, u16 value
 		       data->addr + ADDR_REG_OFFSET);
 	}
 	outb_p(value & 0xff, data->addr + DATA_REG_OFFSET);
-	w83627ehf_reset_bank(data, reg);
 
 	mutex_unlock(&data->lock);
 	return 0;
 }
 
 /* This function assumes that the caller holds data->update_lock */
+static void nct6775_write_fan_div(struct w83627ehf_data *data, int nr)
+{
+	u8 reg;
+
+	switch (nr) {
+	case 0:
+		reg = (w83627ehf_read_value(data, NCT6775_REG_FANDIV1) & 0x70)
+		    | (data->fan_div[0] & 0x7);
+		w83627ehf_write_value(data, NCT6775_REG_FANDIV1, reg);
+		break;
+	case 1:
+		reg = (w83627ehf_read_value(data, NCT6775_REG_FANDIV1) & 0x7)
+		    | ((data->fan_div[1] << 4) & 0x70);
+		w83627ehf_write_value(data, NCT6775_REG_FANDIV1, reg);
+	case 2:
+		reg = (w83627ehf_read_value(data, NCT6775_REG_FANDIV2) & 0x70)
+		    | (data->fan_div[2] & 0x7);
+		w83627ehf_write_value(data, NCT6775_REG_FANDIV2, reg);
+		break;
+	case 3:
+		reg = (w83627ehf_read_value(data, NCT6775_REG_FANDIV2) & 0x7)
+		    | ((data->fan_div[3] << 4) & 0x70);
+		w83627ehf_write_value(data, NCT6775_REG_FANDIV2, reg);
+		break;
+	}
+}
+
+/* This function assumes that the caller holds data->update_lock */
 static void w83627ehf_write_fan_div(struct w83627ehf_data *data, int nr)
 {
 	u8 reg;
@@ -463,6 +635,32 @@ static void w83627ehf_write_fan_div(struct w83627ehf_data *data, int nr)
 	}
 }
 
+static void w83627ehf_write_fan_div_common(struct device *dev,
+					   struct w83627ehf_data *data, int nr)
+{
+	struct w83627ehf_sio_data *sio_data = dev->platform_data;
+
+	if (sio_data->kind == nct6776)
+		; /* no dividers, do nothing */
+	else if (sio_data->kind == nct6775)
+		nct6775_write_fan_div(data, nr);
+	else
+		w83627ehf_write_fan_div(data, nr);
+}
+
+static void nct6775_update_fan_div(struct w83627ehf_data *data)
+{
+	u8 i;
+
+	i = w83627ehf_read_value(data, NCT6775_REG_FANDIV1);
+	data->fan_div[0] = i & 0x7;
+	data->fan_div[1] = (i & 0x70) >> 4;
+	i = w83627ehf_read_value(data, NCT6775_REG_FANDIV2);
+	data->fan_div[2] = i & 0x7;
+	if (data->has_fan & (1<<3))
+		data->fan_div[3] = (i & 0x70) >> 4;
+}
+
 static void w83627ehf_update_fan_div(struct w83627ehf_data *data)
 {
 	int i;
@@ -488,10 +686,79 @@ static void w83627ehf_update_fan_div(struct w83627ehf_data *data)
 	}
 }
 
+static void w83627ehf_update_fan_div_common(struct device *dev,
+					    struct w83627ehf_data *data)
+{
+	struct w83627ehf_sio_data *sio_data = dev->platform_data;
+
+	if (sio_data->kind == nct6776)
+		; /* no dividers, do nothing */
+	else if (sio_data->kind == nct6775)
+		nct6775_update_fan_div(data);
+	else
+		w83627ehf_update_fan_div(data);
+}
+
+static void nct6775_update_pwm(struct w83627ehf_data *data)
+{
+	int i;
+	int pwmcfg, fanmodecfg;
+
+	for (i = 0; i < data->pwm_num; i++) {
+		pwmcfg = w83627ehf_read_value(data,
+					      W83627EHF_REG_PWM_ENABLE[i]);
+		fanmodecfg = w83627ehf_read_value(data,
+						  NCT6775_REG_FAN_MODE[i]);
+		data->pwm_mode[i] =
+		  ((pwmcfg >> W83627EHF_PWM_MODE_SHIFT[i]) & 1) ? 0 : 1;
+		data->pwm_enable[i] = ((fanmodecfg >> 4) & 7) + 1;
+		data->tolerance[i] = fanmodecfg & 0x0f;
+		data->pwm[i] = w83627ehf_read_value(data, data->REG_PWM[i]);
+	}
+}
+
+static void w83627ehf_update_pwm(struct w83627ehf_data *data)
+{
+	int i;
+	int pwmcfg = 0, tolerance = 0; /* shut up the compiler */
+
+	for (i = 0; i < data->pwm_num; i++) {
+		if (!(data->has_fan & (1 << i)))
+			continue;
+
+		/* pwmcfg, tolerance mapped for i=0, i=1 to same reg */
+		if (i != 1) {
+			pwmcfg = w83627ehf_read_value(data,
+					W83627EHF_REG_PWM_ENABLE[i]);
+			tolerance = w83627ehf_read_value(data,
+					W83627EHF_REG_TOLERANCE[i]);
+		}
+		data->pwm_mode[i] =
+			((pwmcfg >> W83627EHF_PWM_MODE_SHIFT[i]) & 1) ? 0 : 1;
+		data->pwm_enable[i] = ((pwmcfg >> W83627EHF_PWM_ENABLE_SHIFT[i])
+				       & 3) + 1;
+		data->pwm[i] = w83627ehf_read_value(data, data->REG_PWM[i]);
+
+		data->tolerance[i] = (tolerance >> (i == 1 ? 4 : 0)) & 0x0f;
+	}
+}
+
+static void w83627ehf_update_pwm_common(struct device *dev,
+					struct w83627ehf_data *data)
+{
+	struct w83627ehf_sio_data *sio_data = dev->platform_data;
+
+	if (sio_data->kind == nct6775 || sio_data->kind == nct6776)
+		nct6775_update_pwm(data);
+	else
+		w83627ehf_update_pwm(data);
+}
+
 static struct w83627ehf_data *w83627ehf_update_device(struct device *dev)
 {
 	struct w83627ehf_data *data = dev_get_drvdata(dev);
-	int pwmcfg = 0, tolerance = 0; /* shut up the compiler */
+	struct w83627ehf_sio_data *sio_data = dev->platform_data;
+
 	int i;
 
 	mutex_lock(&data->update_lock);
@@ -499,7 +766,7 @@ static struct w83627ehf_data *w83627ehf_update_device(struct device *dev)
 	if (time_after(jiffies, data->last_updated + HZ + HZ/2)
 	 || !data->valid) {
 		/* Fan clock dividers */
-		w83627ehf_update_fan_div(data);
+		w83627ehf_update_fan_div_common(dev, data);
 
 		/* Measured voltages and limits */
 		for (i = 0; i < data->in_num; i++) {
@@ -513,92 +780,90 @@ static struct w83627ehf_data *w83627ehf_update_device(struct device *dev)
 
 		/* Measured fan speeds and limits */
 		for (i = 0; i < 5; i++) {
+			u16 reg;
+
 			if (!(data->has_fan & (1 << i)))
 				continue;
 
-			data->fan[i] = w83627ehf_read_value(data,
-				       W83627EHF_REG_FAN[i]);
-			data->fan_min[i] = w83627ehf_read_value(data,
-					   W83627EHF_REG_FAN_MIN[i]);
+			reg = w83627ehf_read_value(data, data->REG_FAN[i]);
+			data->rpm[i] = data->fan_from_reg(reg,
+							  data->fan_div[i]);
+
+			if (data->has_fan_min & (1 << i))
+				data->fan_min[i] = w83627ehf_read_value(data,
+					   data->REG_FAN_MIN[i]);
 
 			/* If we failed to measure the fan speed and clock
 			   divider can be increased, let's try that for next
 			   time */
-			if (data->fan[i] == 0xff
-			 && data->fan_div[i] < 0x07) {
-			 	dev_dbg(dev, "Increasing fan%d "
+			if (data->has_fan_div
+			    && (reg >= 0xff || (sio_data->kind == nct6775
+						&& reg == 0x00))
+			    && data->fan_div[i] < 0x07) {
+				dev_dbg(dev, "Increasing fan%d "
 					"clock divider from %u to %u\n",
 					i + 1, div_from_reg(data->fan_div[i]),
 					div_from_reg(data->fan_div[i] + 1));
 				data->fan_div[i]++;
-				w83627ehf_write_fan_div(data, i);
+				w83627ehf_write_fan_div_common(dev, data, i);
 				/* Preserve min limit if possible */
-				if (data->fan_min[i] >= 2
+				if ((data->has_fan_min & (1 << i))
+				 && data->fan_min[i] >= 2
 				 && data->fan_min[i] != 255)
 					w83627ehf_write_value(data,
-						W83627EHF_REG_FAN_MIN[i],
+						data->REG_FAN_MIN[i],
 						(data->fan_min[i] /= 2));
 			}
 		}
 
+		w83627ehf_update_pwm_common(dev, data);
+
 		for (i = 0; i < data->pwm_num; i++) {
 			if (!(data->has_fan & (1 << i)))
 				continue;
 
-			/* pwmcfg, tolerance mapped for i=0, i=1 to same reg */
-			if (i != 1) {
-				pwmcfg = w83627ehf_read_value(data,
-						W83627EHF_REG_PWM_ENABLE[i]);
-				tolerance = w83627ehf_read_value(data,
-						W83627EHF_REG_TOLERANCE[i]);
-			}
-			data->pwm_mode[i] =
-				((pwmcfg >> W83627EHF_PWM_MODE_SHIFT[i]) & 1)
-				? 0 : 1;
-			data->pwm_enable[i] =
-					((pwmcfg >> W83627EHF_PWM_ENABLE_SHIFT[i])
-						& 3) + 1;
-			data->pwm[i] = w83627ehf_read_value(data,
-						W83627EHF_REG_PWM[i]);
-			data->fan_start_output[i] = w83627ehf_read_value(data,
-						W83627EHF_REG_FAN_START_OUTPUT[i]);
-			data->fan_stop_output[i] = w83627ehf_read_value(data,
-						W83627EHF_REG_FAN_STOP_OUTPUT[i]);
-			data->fan_stop_time[i] = w83627ehf_read_value(data,
-						W83627EHF_REG_FAN_STOP_TIME[i]);
-
-			if (data->REG_FAN_MAX_OUTPUT[i] != 0xff)
+			data->fan_start_output[i] =
+			  w83627ehf_read_value(data,
+					       data->REG_FAN_START_OUTPUT[i]);
+			data->fan_stop_output[i] =
+			  w83627ehf_read_value(data,
+					       data->REG_FAN_STOP_OUTPUT[i]);
+			data->fan_stop_time[i] =
+			  w83627ehf_read_value(data,
+					       data->REG_FAN_STOP_TIME[i]);
+
+			if (data->REG_FAN_MAX_OUTPUT &&
+			    data->REG_FAN_MAX_OUTPUT[i] != 0xff)
 				data->fan_max_output[i] =
 				  w83627ehf_read_value(data,
-					       data->REG_FAN_MAX_OUTPUT[i]);
+						data->REG_FAN_MAX_OUTPUT[i]);
 
-			if (data->REG_FAN_STEP_OUTPUT[i] != 0xff)
+			if (data->REG_FAN_STEP_OUTPUT &&
+			    data->REG_FAN_STEP_OUTPUT[i] != 0xff)
 				data->fan_step_output[i] =
 				  w83627ehf_read_value(data,
-					       data->REG_FAN_STEP_OUTPUT[i]);
+						data->REG_FAN_STEP_OUTPUT[i]);
 
 			data->target_temp[i] =
 				w83627ehf_read_value(data,
-					W83627EHF_REG_TARGET[i]) &
+					data->REG_TARGET[i]) &
 					(data->pwm_mode[i] == 1 ? 0x7f : 0xff);
-			data->tolerance[i] = (tolerance >> (i == 1 ? 4 : 0))
-									& 0x0f;
 		}
 
 		/* Measured temperatures and limits */
-		data->temp1 = w83627ehf_read_value(data,
-			      W83627EHF_REG_TEMP1);
-		data->temp1_max = w83627ehf_read_value(data,
-				  W83627EHF_REG_TEMP1_OVER);
-		data->temp1_max_hyst = w83627ehf_read_value(data,
-				       W83627EHF_REG_TEMP1_HYST);
-		for (i = 0; i < 2; i++) {
+		for (i = 0; i < NUM_REG_TEMP; i++) {
+			if (!(data->have_temp & (1 << i)))
+				continue;
 			data->temp[i] = w83627ehf_read_value(data,
-					W83627EHF_REG_TEMP[i]);
-			data->temp_max[i] = w83627ehf_read_value(data,
-					    W83627EHF_REG_TEMP_OVER[i]);
-			data->temp_max_hyst[i] = w83627ehf_read_value(data,
-						 W83627EHF_REG_TEMP_HYST[i]);
+						data->reg_temp[i]);
+			if (data->reg_temp_over[i])
+				data->temp_max[i]
+				  = w83627ehf_read_value(data,
+						data->reg_temp_over[i]);
+			if (data->reg_temp_hyst[i])
+				data->temp_max_hyst[i]
+				  = w83627ehf_read_value(data,
+						data->reg_temp_hyst[i]);
 		}
 
 		data->alarms = w83627ehf_read_value(data,
@@ -625,7 +890,8 @@ show_##reg(struct device *dev, struct device_attribute *attr, \
 	   char *buf) \
 { \
 	struct w83627ehf_data *data = w83627ehf_update_device(dev); \
-	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \
+	struct sensor_device_attribute *sensor_attr = \
+		to_sensor_dev_attr(attr); \
 	int nr = sensor_attr->index; \
 	return sprintf(buf, "%ld\n", in_from_reg(data->reg[nr], nr)); \
 }
@@ -635,14 +901,18 @@ show_in_reg(in_max)
 
 #define store_in_reg(REG, reg) \
 static ssize_t \
-store_in_##reg (struct device *dev, struct device_attribute *attr, \
-			const char *buf, size_t count) \
+store_in_##reg(struct device *dev, struct device_attribute *attr, \
+	       const char *buf, size_t count) \
 { \
 	struct w83627ehf_data *data = dev_get_drvdata(dev); \
-	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \
+	struct sensor_device_attribute *sensor_attr = \
+		to_sensor_dev_attr(attr); \
 	int nr = sensor_attr->index; \
-	u32 val = simple_strtoul(buf, NULL, 10); \
- \
+	unsigned long val; \
+	int err; \
+	err = strict_strtoul(buf, 10, &val); \
+	if (err < 0) \
+		return err; \
 	mutex_lock(&data->update_lock); \
 	data->in_##reg[nr] = in_to_reg(val, nr); \
 	w83627ehf_write_value(data, W83627EHF_REG_IN_##REG(nr), \
@@ -654,7 +924,8 @@ store_in_##reg (struct device *dev, struct device_attribute *attr, \
 store_in_reg(MIN, min)
 store_in_reg(MAX, max)
 
-static ssize_t show_alarm(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
+			  char *buf)
 {
 	struct w83627ehf_data *data = w83627ehf_update_device(dev);
 	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
@@ -689,45 +960,50 @@ static struct sensor_device_attribute sda_in_alarm[] = {
 };
 
 static struct sensor_device_attribute sda_in_min[] = {
-       SENSOR_ATTR(in0_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 0),
-       SENSOR_ATTR(in1_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 1),
-       SENSOR_ATTR(in2_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 2),
-       SENSOR_ATTR(in3_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 3),
-       SENSOR_ATTR(in4_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 4),
-       SENSOR_ATTR(in5_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 5),
-       SENSOR_ATTR(in6_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 6),
-       SENSOR_ATTR(in7_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 7),
-       SENSOR_ATTR(in8_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 8),
-       SENSOR_ATTR(in9_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 9),
+	SENSOR_ATTR(in0_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 0),
+	SENSOR_ATTR(in1_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 1),
+	SENSOR_ATTR(in2_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 2),
+	SENSOR_ATTR(in3_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 3),
+	SENSOR_ATTR(in4_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 4),
+	SENSOR_ATTR(in5_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 5),
+	SENSOR_ATTR(in6_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 6),
+	SENSOR_ATTR(in7_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 7),
+	SENSOR_ATTR(in8_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 8),
+	SENSOR_ATTR(in9_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 9),
 };
 
 static struct sensor_device_attribute sda_in_max[] = {
-       SENSOR_ATTR(in0_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 0),
-       SENSOR_ATTR(in1_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 1),
-       SENSOR_ATTR(in2_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 2),
-       SENSOR_ATTR(in3_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 3),
-       SENSOR_ATTR(in4_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 4),
-       SENSOR_ATTR(in5_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 5),
-       SENSOR_ATTR(in6_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 6),
-       SENSOR_ATTR(in7_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 7),
-       SENSOR_ATTR(in8_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 8),
-       SENSOR_ATTR(in9_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 9),
+	SENSOR_ATTR(in0_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 0),
+	SENSOR_ATTR(in1_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 1),
+	SENSOR_ATTR(in2_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 2),
+	SENSOR_ATTR(in3_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 3),
+	SENSOR_ATTR(in4_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 4),
+	SENSOR_ATTR(in5_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 5),
+	SENSOR_ATTR(in6_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 6),
+	SENSOR_ATTR(in7_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 7),
+	SENSOR_ATTR(in8_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 8),
+	SENSOR_ATTR(in9_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 9),
 };
 
-#define show_fan_reg(reg) \
-static ssize_t \
-show_##reg(struct device *dev, struct device_attribute *attr, \
-	   char *buf) \
-{ \
-	struct w83627ehf_data *data = w83627ehf_update_device(dev); \
-	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \
-	int nr = sensor_attr->index; \
-	return sprintf(buf, "%d\n", \
-		       fan_from_reg(data->reg[nr], \
-				    div_from_reg(data->fan_div[nr]))); \
+static ssize_t
+show_fan(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct w83627ehf_data *data = w83627ehf_update_device(dev);
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+	return sprintf(buf, "%d\n", data->rpm[nr]);
+}
+
+static ssize_t
+show_fan_min(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct w83627ehf_data *data = w83627ehf_update_device(dev);
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+	return sprintf(buf, "%d\n",
+		       data->fan_from_reg_min(data->fan_min[nr],
+					      data->fan_div[nr]));
 }
-show_fan_reg(fan);
-show_fan_reg(fan_min);
 
 static ssize_t
 show_fan_div(struct device *dev, struct device_attribute *attr,
@@ -746,11 +1022,32 @@ store_fan_min(struct device *dev, struct device_attribute *attr,
 	struct w83627ehf_data *data = dev_get_drvdata(dev);
 	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
 	int nr = sensor_attr->index;
-	unsigned int val = simple_strtoul(buf, NULL, 10);
+	unsigned long val;
+	int err;
 	unsigned int reg;
 	u8 new_div;
 
+	err = strict_strtoul(buf, 10, &val);
+	if (err < 0)
+		return err;
+
 	mutex_lock(&data->update_lock);
+	if (!data->has_fan_div) {
+		/*
+		 * Only NCT6776F for now, so we know that this is a 13 bit
+		 * register
+		 */
+		if (!val) {
+			val = 0xff1f;
+		} else {
+			if (val > 1350000U)
+				val = 135000U;
+			val = 1350000U / val;
+			val = (val & 0x1f) | ((val << 3) & 0xff00);
+		}
+		data->fan_min[nr] = val;
+		goto done;	/* Leave fan divider alone */
+	}
 	if (!val) {
 		/* No min limit, alarm disabled */
 		data->fan_min[nr] = 255;
@@ -761,15 +1058,17 @@ store_fan_min(struct device *dev, struct device_attribute *attr,
 		   even with the highest divider (128) */
 		data->fan_min[nr] = 254;
 		new_div = 7; /* 128 == (1 << 7) */
-		dev_warn(dev, "fan%u low limit %u below minimum %u, set to "
-			 "minimum\n", nr + 1, val, fan_from_reg(254, 128));
+		dev_warn(dev, "fan%u low limit %lu below minimum %u, set to "
+			 "minimum\n", nr + 1, val,
+			 data->fan_from_reg_min(254, 7));
 	} else if (!reg) {
 		/* Speed above this value cannot possibly be represented,
 		   even with the lowest divider (1) */
 		data->fan_min[nr] = 1;
 		new_div = 0; /* 1 == (1 << 0) */
-		dev_warn(dev, "fan%u low limit %u above maximum %u, set to "
-			 "maximum\n", nr + 1, val, fan_from_reg(1, 1));
+		dev_warn(dev, "fan%u low limit %lu above maximum %u, set to "
+			 "maximum\n", nr + 1, val,
+			 data->fan_from_reg_min(1, 0));
 	} else {
 		/* Automatically pick the best divider, i.e. the one such
 		   that the min limit will correspond to a register value
@@ -785,25 +1084,16 @@ store_fan_min(struct device *dev, struct device_attribute *attr,
 	/* Write both the fan clock divider (if it changed) and the new
 	   fan min (unconditionally) */
 	if (new_div != data->fan_div[nr]) {
-		/* Preserve the fan speed reading */
-		if (data->fan[nr] != 0xff) {
-			if (new_div > data->fan_div[nr])
-				data->fan[nr] >>= new_div - data->fan_div[nr];
-			else if (data->fan[nr] & 0x80)
-				data->fan[nr] = 0xff;
-			else
-				data->fan[nr] <<= data->fan_div[nr] - new_div;
-		}
-
 		dev_dbg(dev, "fan%u clock divider changed from %u to %u\n",
 			nr + 1, div_from_reg(data->fan_div[nr]),
 			div_from_reg(new_div));
 		data->fan_div[nr] = new_div;
-		w83627ehf_write_fan_div(data, nr);
+		w83627ehf_write_fan_div_common(dev, data, nr);
 		/* Give the chip time to sample a new speed value */
 		data->last_updated = jiffies;
 	}
-	w83627ehf_write_value(data, W83627EHF_REG_FAN_MIN[nr],
+done:
+	w83627ehf_write_value(data, data->REG_FAN_MIN[nr],
 			      data->fan_min[nr]);
 	mutex_unlock(&data->update_lock);
 
@@ -847,70 +1137,54 @@ static struct sensor_device_attribute sda_fan_div[] = {
 	SENSOR_ATTR(fan5_div, S_IRUGO, show_fan_div, NULL, 4),
 };
 
-#define show_temp1_reg(reg) \
-static ssize_t \
-show_##reg(struct device *dev, struct device_attribute *attr, \
-	   char *buf) \
-{ \
-	struct w83627ehf_data *data = w83627ehf_update_device(dev); \
-	return sprintf(buf, "%d\n", temp1_from_reg(data->reg)); \
-}
-show_temp1_reg(temp1);
-show_temp1_reg(temp1_max);
-show_temp1_reg(temp1_max_hyst);
-
-#define store_temp1_reg(REG, reg) \
-static ssize_t \
-store_temp1_##reg(struct device *dev, struct device_attribute *attr, \
-		  const char *buf, size_t count) \
-{ \
-	struct w83627ehf_data *data = dev_get_drvdata(dev); \
-	long val = simple_strtol(buf, NULL, 10); \
- \
-	mutex_lock(&data->update_lock); \
-	data->temp1_##reg = temp1_to_reg(val, -128000, 127000); \
-	w83627ehf_write_value(data, W83627EHF_REG_TEMP1_##REG, \
-			      data->temp1_##reg); \
-	mutex_unlock(&data->update_lock); \
-	return count; \
+static ssize_t
+show_temp_label(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct w83627ehf_data *data = w83627ehf_update_device(dev);
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+	return sprintf(buf, "%s\n", data->temp_label[data->temp_src[nr]]);
 }
-store_temp1_reg(OVER, max);
-store_temp1_reg(HYST, max_hyst);
 
-#define show_temp_reg(reg) \
+#define show_temp_reg(addr, reg) \
 static ssize_t \
 show_##reg(struct device *dev, struct device_attribute *attr, \
 	   char *buf) \
 { \
 	struct w83627ehf_data *data = w83627ehf_update_device(dev); \
-	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \
+	struct sensor_device_attribute *sensor_attr = \
+		to_sensor_dev_attr(attr); \
 	int nr = sensor_attr->index; \
 	return sprintf(buf, "%d\n", \
-		       LM75_TEMP_FROM_REG(data->reg[nr])); \
+		       temp_from_reg(data->addr[nr], data->reg[nr])); \
 }
-show_temp_reg(temp);
-show_temp_reg(temp_max);
-show_temp_reg(temp_max_hyst);
+show_temp_reg(reg_temp, temp);
+show_temp_reg(reg_temp_over, temp_max);
+show_temp_reg(reg_temp_hyst, temp_max_hyst);
 
-#define store_temp_reg(REG, reg) \
+#define store_temp_reg(addr, reg) \
 static ssize_t \
 store_##reg(struct device *dev, struct device_attribute *attr, \
 	    const char *buf, size_t count) \
 { \
 	struct w83627ehf_data *data = dev_get_drvdata(dev); \
-	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \
+	struct sensor_device_attribute *sensor_attr = \
+		to_sensor_dev_attr(attr); \
 	int nr = sensor_attr->index; \
-	long val = simple_strtol(buf, NULL, 10); \
- \
+	int err; \
+	long val; \
+	err = strict_strtol(buf, 10, &val); \
+	if (err < 0) \
+		return err; \
 	mutex_lock(&data->update_lock); \
-	data->reg[nr] = LM75_TEMP_TO_REG(val); \
-	w83627ehf_write_value(data, W83627EHF_REG_TEMP_##REG[nr], \
+	data->reg[nr] = temp_to_reg(data->addr[nr], val); \
+	w83627ehf_write_value(data, data->addr[nr], \
 			      data->reg[nr]); \
 	mutex_unlock(&data->update_lock); \
 	return count; \
 }
-store_temp_reg(OVER, temp_max);
-store_temp_reg(HYST, temp_max_hyst);
+store_temp_reg(reg_temp_over, temp_max);
+store_temp_reg(reg_temp_hyst, temp_max_hyst);
 
 static ssize_t
 show_temp_type(struct device *dev, struct device_attribute *attr, char *buf)
@@ -922,27 +1196,69 @@ show_temp_type(struct device *dev, struct device_attribute *attr, char *buf)
 }
 
 static struct sensor_device_attribute sda_temp_input[] = {
-	SENSOR_ATTR(temp1_input, S_IRUGO, show_temp1, NULL, 0),
-	SENSOR_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 0),
-	SENSOR_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 1),
+	SENSOR_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0),
+	SENSOR_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1),
+	SENSOR_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2),
+	SENSOR_ATTR(temp4_input, S_IRUGO, show_temp, NULL, 3),
+	SENSOR_ATTR(temp5_input, S_IRUGO, show_temp, NULL, 4),
+	SENSOR_ATTR(temp6_input, S_IRUGO, show_temp, NULL, 5),
+	SENSOR_ATTR(temp7_input, S_IRUGO, show_temp, NULL, 6),
+	SENSOR_ATTR(temp8_input, S_IRUGO, show_temp, NULL, 7),
+	SENSOR_ATTR(temp9_input, S_IRUGO, show_temp, NULL, 8),
+};
+
+static struct sensor_device_attribute sda_temp_label[] = {
+	SENSOR_ATTR(temp1_label, S_IRUGO, show_temp_label, NULL, 0),
+	SENSOR_ATTR(temp2_label, S_IRUGO, show_temp_label, NULL, 1),
+	SENSOR_ATTR(temp3_label, S_IRUGO, show_temp_label, NULL, 2),
+	SENSOR_ATTR(temp4_label, S_IRUGO, show_temp_label, NULL, 3),
+	SENSOR_ATTR(temp5_label, S_IRUGO, show_temp_label, NULL, 4),
+	SENSOR_ATTR(temp6_label, S_IRUGO, show_temp_label, NULL, 5),
+	SENSOR_ATTR(temp7_label, S_IRUGO, show_temp_label, NULL, 6),
+	SENSOR_ATTR(temp8_label, S_IRUGO, show_temp_label, NULL, 7),
+	SENSOR_ATTR(temp9_label, S_IRUGO, show_temp_label, NULL, 8),
 };
 
 static struct sensor_device_attribute sda_temp_max[] = {
-	SENSOR_ATTR(temp1_max, S_IRUGO | S_IWUSR, show_temp1_max,
-		    store_temp1_max, 0),
-	SENSOR_ATTR(temp2_max, S_IRUGO | S_IWUSR, show_temp_max,
+	SENSOR_ATTR(temp1_max, S_IRUGO | S_IWUSR, show_temp_max,
 		    store_temp_max, 0),
-	SENSOR_ATTR(temp3_max, S_IRUGO | S_IWUSR, show_temp_max,
+	SENSOR_ATTR(temp2_max, S_IRUGO | S_IWUSR, show_temp_max,
 		    store_temp_max, 1),
+	SENSOR_ATTR(temp3_max, S_IRUGO | S_IWUSR, show_temp_max,
+		    store_temp_max, 2),
+	SENSOR_ATTR(temp4_max, S_IRUGO | S_IWUSR, show_temp_max,
+		    store_temp_max, 3),
+	SENSOR_ATTR(temp5_max, S_IRUGO | S_IWUSR, show_temp_max,
+		    store_temp_max, 4),
+	SENSOR_ATTR(temp6_max, S_IRUGO | S_IWUSR, show_temp_max,
+		    store_temp_max, 5),
+	SENSOR_ATTR(temp7_max, S_IRUGO | S_IWUSR, show_temp_max,
+		    store_temp_max, 6),
+	SENSOR_ATTR(temp8_max, S_IRUGO | S_IWUSR, show_temp_max,
+		    store_temp_max, 7),
+	SENSOR_ATTR(temp9_max, S_IRUGO | S_IWUSR, show_temp_max,
+		    store_temp_max, 8),
 };
 
 static struct sensor_device_attribute sda_temp_max_hyst[] = {
-	SENSOR_ATTR(temp1_max_hyst, S_IRUGO | S_IWUSR, show_temp1_max_hyst,
-		    store_temp1_max_hyst, 0),
-	SENSOR_ATTR(temp2_max_hyst, S_IRUGO | S_IWUSR, show_temp_max_hyst,
+	SENSOR_ATTR(temp1_max_hyst, S_IRUGO | S_IWUSR, show_temp_max_hyst,
 		    store_temp_max_hyst, 0),
-	SENSOR_ATTR(temp3_max_hyst, S_IRUGO | S_IWUSR, show_temp_max_hyst,
+	SENSOR_ATTR(temp2_max_hyst, S_IRUGO | S_IWUSR, show_temp_max_hyst,
 		    store_temp_max_hyst, 1),
+	SENSOR_ATTR(temp3_max_hyst, S_IRUGO | S_IWUSR, show_temp_max_hyst,
+		    store_temp_max_hyst, 2),
+	SENSOR_ATTR(temp4_max_hyst, S_IRUGO | S_IWUSR, show_temp_max_hyst,
+		    store_temp_max_hyst, 3),
+	SENSOR_ATTR(temp5_max_hyst, S_IRUGO | S_IWUSR, show_temp_max_hyst,
+		    store_temp_max_hyst, 4),
+	SENSOR_ATTR(temp6_max_hyst, S_IRUGO | S_IWUSR, show_temp_max_hyst,
+		    store_temp_max_hyst, 5),
+	SENSOR_ATTR(temp7_max_hyst, S_IRUGO | S_IWUSR, show_temp_max_hyst,
+		    store_temp_max_hyst, 6),
+	SENSOR_ATTR(temp8_max_hyst, S_IRUGO | S_IWUSR, show_temp_max_hyst,
+		    store_temp_max_hyst, 7),
+	SENSOR_ATTR(temp9_max_hyst, S_IRUGO | S_IWUSR, show_temp_max_hyst,
+		    store_temp_max_hyst, 8),
 };
 
 static struct sensor_device_attribute sda_temp_alarm[] = {
@@ -958,11 +1274,12 @@ static struct sensor_device_attribute sda_temp_type[] = {
 };
 
 #define show_pwm_reg(reg) \
-static ssize_t show_##reg (struct device *dev, struct device_attribute *attr, \
-				char *buf) \
+static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \
+			  char *buf) \
 { \
 	struct w83627ehf_data *data = w83627ehf_update_device(dev); \
-	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \
+	struct sensor_device_attribute *sensor_attr = \
+		to_sensor_dev_attr(attr); \
 	int nr = sensor_attr->index; \
 	return sprintf(buf, "%d\n", data->reg[nr]); \
 }
@@ -978,9 +1295,14 @@ store_pwm_mode(struct device *dev, struct device_attribute *attr,
 	struct w83627ehf_data *data = dev_get_drvdata(dev);
 	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
 	int nr = sensor_attr->index;
-	u32 val = simple_strtoul(buf, NULL, 10);
+	unsigned long val;
+	int err;
 	u16 reg;
 
+	err = strict_strtoul(buf, 10, &val);
+	if (err < 0)
+		return err;
+
 	if (val > 1)
 		return -EINVAL;
 	mutex_lock(&data->update_lock);
@@ -1001,11 +1323,18 @@ store_pwm(struct device *dev, struct device_attribute *attr,
 	struct w83627ehf_data *data = dev_get_drvdata(dev);
 	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
 	int nr = sensor_attr->index;
-	u32 val = SENSORS_LIMIT(simple_strtoul(buf, NULL, 10), 0, 255);
+	unsigned long val;
+	int err;
+
+	err = strict_strtoul(buf, 10, &val);
+	if (err < 0)
+		return err;
+
+	val = SENSORS_LIMIT(val, 0, 255);
 
 	mutex_lock(&data->update_lock);
 	data->pwm[nr] = val;
-	w83627ehf_write_value(data, W83627EHF_REG_PWM[nr], val);
+	w83627ehf_write_value(data, data->REG_PWM[nr], val);
 	mutex_unlock(&data->update_lock);
 	return count;
 }
@@ -1015,19 +1344,38 @@ store_pwm_enable(struct device *dev, struct device_attribute *attr,
 			const char *buf, size_t count)
 {
 	struct w83627ehf_data *data = dev_get_drvdata(dev);
+	struct w83627ehf_sio_data *sio_data = dev->platform_data;
 	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
 	int nr = sensor_attr->index;
-	u32 val = simple_strtoul(buf, NULL, 10);
+	unsigned long val;
+	int err;
 	u16 reg;
 
-	if (!val || (val > 4))
+	err = strict_strtoul(buf, 10, &val);
+	if (err < 0)
+		return err;
+
+	if (!val || (val > 4 && val != data->pwm_enable_orig[nr]))
 		return -EINVAL;
+	/* SmartFan III mode is not supported on NCT6776F */
+	if (sio_data->kind == nct6776 && val == 4)
+		return -EINVAL;
+
 	mutex_lock(&data->update_lock);
-	reg = w83627ehf_read_value(data, W83627EHF_REG_PWM_ENABLE[nr]);
 	data->pwm_enable[nr] = val;
-	reg &= ~(0x03 << W83627EHF_PWM_ENABLE_SHIFT[nr]);
-	reg |= (val - 1) << W83627EHF_PWM_ENABLE_SHIFT[nr];
-	w83627ehf_write_value(data, W83627EHF_REG_PWM_ENABLE[nr], reg);
+	if (sio_data->kind == nct6775 || sio_data->kind == nct6776) {
+		reg = w83627ehf_read_value(data,
+					   NCT6775_REG_FAN_MODE[nr]);
+		reg &= 0x0f;
+		reg |= (val - 1) << 4;
+		w83627ehf_write_value(data,
+				      NCT6775_REG_FAN_MODE[nr], reg);
+	} else {
+		reg = w83627ehf_read_value(data, W83627EHF_REG_PWM_ENABLE[nr]);
+		reg &= ~(0x03 << W83627EHF_PWM_ENABLE_SHIFT[nr]);
+		reg |= (val - 1) << W83627EHF_PWM_ENABLE_SHIFT[nr];
+		w83627ehf_write_value(data, W83627EHF_REG_PWM_ENABLE[nr], reg);
+	}
 	mutex_unlock(&data->update_lock);
 	return count;
 }
@@ -1038,9 +1386,10 @@ static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \
 				char *buf) \
 { \
 	struct w83627ehf_data *data = w83627ehf_update_device(dev); \
-	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \
+	struct sensor_device_attribute *sensor_attr = \
+		to_sensor_dev_attr(attr); \
 	int nr = sensor_attr->index; \
-	return sprintf(buf, "%d\n", temp1_from_reg(data->reg[nr])); \
+	return sprintf(buf, "%d\n", data->reg[nr] * 1000); \
 }
 
 show_tol_temp(tolerance)
@@ -1053,11 +1402,18 @@ store_target_temp(struct device *dev, struct device_attribute *attr,
 	struct w83627ehf_data *data = dev_get_drvdata(dev);
 	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
 	int nr = sensor_attr->index;
-	u8 val = temp1_to_reg(simple_strtoul(buf, NULL, 10), 0, 127000);
+	long val;
+	int err;
+
+	err = strict_strtol(buf, 10, &val);
+	if (err < 0)
+		return err;
+
+	val = SENSORS_LIMIT(DIV_ROUND_CLOSEST(val, 1000), 0, 127);
 
 	mutex_lock(&data->update_lock);
 	data->target_temp[nr] = val;
-	w83627ehf_write_value(data, W83627EHF_REG_TARGET[nr], val);
+	w83627ehf_write_value(data, data->REG_TARGET[nr], val);
 	mutex_unlock(&data->update_lock);
 	return count;
 }
@@ -1067,20 +1423,37 @@ store_tolerance(struct device *dev, struct device_attribute *attr,
 			const char *buf, size_t count)
 {
 	struct w83627ehf_data *data = dev_get_drvdata(dev);
+	struct w83627ehf_sio_data *sio_data = dev->platform_data;
 	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
 	int nr = sensor_attr->index;
 	u16 reg;
+	long val;
+	int err;
+
+	err = strict_strtol(buf, 10, &val);
+	if (err < 0)
+		return err;
+
 	/* Limit the temp to 0C - 15C */
-	u8 val = temp1_to_reg(simple_strtoul(buf, NULL, 10), 0, 15000);
+	val = SENSORS_LIMIT(DIV_ROUND_CLOSEST(val, 1000), 0, 15);
 
 	mutex_lock(&data->update_lock);
-	reg = w83627ehf_read_value(data, W83627EHF_REG_TOLERANCE[nr]);
-	data->tolerance[nr] = val;
-	if (nr == 1)
-		reg = (reg & 0x0f) | (val << 4);
-	else
+	if (sio_data->kind == nct6775 || sio_data->kind == nct6776) {
+		/* Limit tolerance further for NCT6776F */
+		if (sio_data->kind == nct6776 && val > 7)
+			val = 7;
+		reg = w83627ehf_read_value(data, NCT6775_REG_FAN_MODE[nr]);
 		reg = (reg & 0xf0) | val;
-	w83627ehf_write_value(data, W83627EHF_REG_TOLERANCE[nr], reg);
+		w83627ehf_write_value(data, NCT6775_REG_FAN_MODE[nr], reg);
+	} else {
+		reg = w83627ehf_read_value(data, W83627EHF_REG_TOLERANCE[nr]);
+		if (nr == 1)
+			reg = (reg & 0x0f) | (val << 4);
+		else
+			reg = (reg & 0xf0) | val;
+		w83627ehf_write_value(data, W83627EHF_REG_TOLERANCE[nr], reg);
+	}
+	data->tolerance[nr] = val;
 	mutex_unlock(&data->update_lock);
 	return count;
 }
@@ -1143,18 +1516,25 @@ static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \
 		       char *buf) \
 { \
 	struct w83627ehf_data *data = w83627ehf_update_device(dev); \
-	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \
+	struct sensor_device_attribute *sensor_attr = \
+		to_sensor_dev_attr(attr); \
 	int nr = sensor_attr->index; \
 	return sprintf(buf, "%d\n", data->reg[nr]); \
-}\
+} \
 static ssize_t \
 store_##reg(struct device *dev, struct device_attribute *attr, \
 			    const char *buf, size_t count) \
-{\
+{ \
 	struct w83627ehf_data *data = dev_get_drvdata(dev); \
-	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \
+	struct sensor_device_attribute *sensor_attr = \
+		to_sensor_dev_attr(attr); \
 	int nr = sensor_attr->index; \
-	u32 val = SENSORS_LIMIT(simple_strtoul(buf, NULL, 10), 1, 255); \
+	unsigned long val; \
+	int err; \
+	err = strict_strtoul(buf, 10, &val); \
+	if (err < 0) \
+		return err; \
+	val = SENSORS_LIMIT(val, 1, 255); \
 	mutex_lock(&data->update_lock); \
 	data->reg[nr] = val; \
 	w83627ehf_write_value(data, data->REG_##REG[nr], val); \
@@ -1172,10 +1552,12 @@ static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \
 				char *buf) \
 { \
 	struct w83627ehf_data *data = w83627ehf_update_device(dev); \
-	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \
+	struct sensor_device_attribute *sensor_attr = \
+		to_sensor_dev_attr(attr); \
 	int nr = sensor_attr->index; \
 	return sprintf(buf, "%d\n", \
-			step_time_from_reg(data->reg[nr], data->pwm_mode[nr])); \
+			step_time_from_reg(data->reg[nr], \
+					   data->pwm_mode[nr])); \
 } \
 \
 static ssize_t \
@@ -1183,10 +1565,15 @@ store_##reg(struct device *dev, struct device_attribute *attr, \
 			const char *buf, size_t count) \
 { \
 	struct w83627ehf_data *data = dev_get_drvdata(dev); \
-	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); \
+	struct sensor_device_attribute *sensor_attr = \
+		to_sensor_dev_attr(attr); \
 	int nr = sensor_attr->index; \
-	u8 val = step_time_to_reg(simple_strtoul(buf, NULL, 10), \
-					data->pwm_mode[nr]); \
+	unsigned long val; \
+	int err; \
+	err = strict_strtoul(buf, 10, &val); \
+	if (err < 0) \
+		return err; \
+	val = step_time_to_reg(val, data->pwm_mode[nr]); \
 	mutex_lock(&data->update_lock); \
 	data->reg[nr] = val; \
 	w83627ehf_write_value(data, W83627EHF_REG_##REG[nr], val); \
@@ -1283,7 +1670,8 @@ static void w83627ehf_device_remove_files(struct device *dev)
 	for (i = 0; i < ARRAY_SIZE(sda_sf3_max_step_arrays); i++) {
 		struct sensor_device_attribute *attr =
 		  &sda_sf3_max_step_arrays[i];
-		if (data->REG_FAN_STEP_OUTPUT[attr->index] != 0xff)
+		if (data->REG_FAN_STEP_OUTPUT &&
+		    data->REG_FAN_STEP_OUTPUT[attr->index] != 0xff)
 			device_remove_file(dev, &attr->dev_attr);
 	}
 	for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays_fan4); i++)
@@ -1309,12 +1697,15 @@ static void w83627ehf_device_remove_files(struct device *dev)
 		device_remove_file(dev, &sda_target_temp[i].dev_attr);
 		device_remove_file(dev, &sda_tolerance[i].dev_attr);
 	}
-	for (i = 0; i < 3; i++) {
-		if ((i == 2) && data->temp3_disable)
+	for (i = 0; i < NUM_REG_TEMP; i++) {
+		if (!(data->have_temp & (1 << i)))
 			continue;
 		device_remove_file(dev, &sda_temp_input[i].dev_attr);
+		device_remove_file(dev, &sda_temp_label[i].dev_attr);
 		device_remove_file(dev, &sda_temp_max[i].dev_attr);
 		device_remove_file(dev, &sda_temp_max_hyst[i].dev_attr);
+		if (i > 2)
+			continue;
 		device_remove_file(dev, &sda_temp_alarm[i].dev_attr);
 		device_remove_file(dev, &sda_temp_type[i].dev_attr);
 	}
@@ -1335,15 +1726,17 @@ static inline void __devinit w83627ehf_init_device(struct w83627ehf_data *data)
 		w83627ehf_write_value(data, W83627EHF_REG_CONFIG,
 				      tmp | 0x01);
 
-	/* Enable temp2 and temp3 if needed */
-	for (i = 0; i < 2; i++) {
-		tmp = w83627ehf_read_value(data,
-					   W83627EHF_REG_TEMP_CONFIG[i]);
-		if ((i == 1) && data->temp3_disable)
+	/* Enable temperature sensors if needed */
+	for (i = 0; i < NUM_REG_TEMP; i++) {
+		if (!(data->have_temp & (1 << i)))
+			continue;
+		if (!data->reg_temp_config[i])
 			continue;
+		tmp = w83627ehf_read_value(data,
+					   data->reg_temp_config[i]);
 		if (tmp & 0x01)
 			w83627ehf_write_value(data,
-					      W83627EHF_REG_TEMP_CONFIG[i],
+					      data->reg_temp_config[i],
 					      tmp & 0xfe);
 	}
 
@@ -1362,13 +1755,39 @@ static inline void __devinit w83627ehf_init_device(struct w83627ehf_data *data)
 	}
 }
 
+static void w82627ehf_swap_tempreg(struct w83627ehf_data *data,
+				   int r1, int r2)
+{
+	u16 tmp;
+
+	tmp = data->temp_src[r1];
+	data->temp_src[r1] = data->temp_src[r2];
+	data->temp_src[r2] = tmp;
+
+	tmp = data->reg_temp[r1];
+	data->reg_temp[r1] = data->reg_temp[r2];
+	data->reg_temp[r2] = tmp;
+
+	tmp = data->reg_temp_over[r1];
+	data->reg_temp_over[r1] = data->reg_temp_over[r2];
+	data->reg_temp_over[r2] = tmp;
+
+	tmp = data->reg_temp_hyst[r1];
+	data->reg_temp_hyst[r1] = data->reg_temp_hyst[r2];
+	data->reg_temp_hyst[r2] = tmp;
+
+	tmp = data->reg_temp_config[r1];
+	data->reg_temp_config[r1] = data->reg_temp_config[r2];
+	data->reg_temp_config[r2] = tmp;
+}
+
 static int __devinit w83627ehf_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct w83627ehf_sio_data *sio_data = dev->platform_data;
 	struct w83627ehf_data *data;
 	struct resource *res;
-	u8 fan4pin, fan5pin, en_vrm10;
+	u8 fan3pin, fan4pin, fan4min, fan5pin, en_vrm10;
 	int i, err = 0;
 
 	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
@@ -1380,7 +1799,8 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev)
 		goto exit;
 	}
 
-	if (!(data = kzalloc(sizeof(struct w83627ehf_data), GFP_KERNEL))) {
+	data = kzalloc(sizeof(struct w83627ehf_data), GFP_KERNEL);
+	if (!data) {
 		err = -ENOMEM;
 		goto exit_release;
 	}
@@ -1393,25 +1813,202 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev)
 
 	/* 627EHG and 627EHF have 10 voltage inputs; 627DHG and 667HG have 9 */
 	data->in_num = (sio_data->kind == w83627ehf) ? 10 : 9;
-	/* 667HG has 3 pwms */
+	/* 667HG, NCT6775F, and NCT6776F have 3 pwms */
 	data->pwm_num = (sio_data->kind == w83667hg
-			 || sio_data->kind == w83667hg_b) ? 3 : 4;
+			 || sio_data->kind == w83667hg_b
+			 || sio_data->kind == nct6775
+			 || sio_data->kind == nct6776) ? 3 : 4;
 
+	data->have_temp = 0x07;
 	/* Check temp3 configuration bit for 667HG */
-	if (sio_data->kind == w83667hg || sio_data->kind == w83667hg_b) {
-		data->temp3_disable = w83627ehf_read_value(data,
-					W83627EHF_REG_TEMP_CONFIG[1]) & 0x01;
-		data->in6_skip = !data->temp3_disable;
+	if (sio_data->kind == w83667hg) {
+		u8 reg;
+
+		reg = w83627ehf_read_value(data, W83627EHF_REG_TEMP_CONFIG[2]);
+		if (reg & 0x01)
+			data->have_temp &= ~(1 << 2);
+		else
+			data->in6_skip = 1;	/* either temp3 or in6 */
+	}
+
+	/* Deal with temperature register setup first. */
+	if (sio_data->kind == nct6775 || sio_data->kind == nct6776) {
+		int mask = 0;
+
+		/*
+		 * Display temperature sensor output only if it monitors
+		 * a source other than one already reported. Always display
+		 * first three temperature registers, though.
+		 */
+		for (i = 0; i < NUM_REG_TEMP; i++) {
+			u8 src;
+
+			data->reg_temp[i] = NCT6775_REG_TEMP[i];
+			data->reg_temp_over[i] = NCT6775_REG_TEMP_OVER[i];
+			data->reg_temp_hyst[i] = NCT6775_REG_TEMP_HYST[i];
+			data->reg_temp_config[i] = NCT6775_REG_TEMP_CONFIG[i];
+
+			src = w83627ehf_read_value(data,
+						   NCT6775_REG_TEMP_SOURCE[i]);
+			src &= 0x1f;
+			if (src && !(mask & (1 << src))) {
+				data->have_temp |= 1 << i;
+				mask |= 1 << src;
+			}
+
+			data->temp_src[i] = src;
+
+			/*
+			 * Now do some register swapping if index 0..2 don't
+			 * point to SYSTIN(1), CPUIN(2), and AUXIN(3).
+			 * Idea is to have the first three attributes
+			 * report SYSTIN, CPUIN, and AUXIN if possible
+			 * without overriding the basic system configuration.
+			 */
+			if (i > 0 && data->temp_src[0] != 1
+			    && data->temp_src[i] == 1)
+				w82627ehf_swap_tempreg(data, 0, i);
+			if (i > 1 && data->temp_src[1] != 2
+			    && data->temp_src[i] == 2)
+				w82627ehf_swap_tempreg(data, 1, i);
+			if (i > 2 && data->temp_src[2] != 3
+			    && data->temp_src[i] == 3)
+				w82627ehf_swap_tempreg(data, 2, i);
+		}
+		if (sio_data->kind == nct6776) {
+			/*
+			 * On NCT6776, AUXTIN and VIN3 pins are shared.
+			 * Only way to detect it is to check if AUXTIN is used
+			 * as a temperature source, and if that source is
+			 * enabled.
+			 *
+			 * If that is the case, disable in6, which reports VIN3.
+			 * Otherwise disable temp3.
+			 */
+			if (data->temp_src[2] == 3) {
+				u8 reg;
+
+				if (data->reg_temp_config[2])
+					reg = w83627ehf_read_value(data,
+						data->reg_temp_config[2]);
+				else
+					reg = 0; /* Assume AUXTIN is used */
+
+				if (reg & 0x01)
+					data->have_temp &= ~(1 << 2);
+				else
+					data->in6_skip = 1;
+			}
+			data->temp_label = nct6776_temp_label;
+		} else {
+			data->temp_label = nct6775_temp_label;
+		}
+	} else if (sio_data->kind == w83667hg_b) {
+		u8 reg;
+
+		/*
+		 * Temperature sources are selected with bank 0, registers 0x49
+		 * and 0x4a.
+		 */
+		for (i = 0; i < ARRAY_SIZE(W83627EHF_REG_TEMP); i++) {
+			data->reg_temp[i] = W83627EHF_REG_TEMP[i];
+			data->reg_temp_over[i] = W83627EHF_REG_TEMP_OVER[i];
+			data->reg_temp_hyst[i] = W83627EHF_REG_TEMP_HYST[i];
+			data->reg_temp_config[i] = W83627EHF_REG_TEMP_CONFIG[i];
+		}
+		reg = w83627ehf_read_value(data, 0x4a);
+		data->temp_src[0] = reg >> 5;
+		reg = w83627ehf_read_value(data, 0x49);
+		data->temp_src[1] = reg & 0x07;
+		data->temp_src[2] = (reg >> 4) & 0x07;
+
+		/*
+		 * W83667HG-B has another temperature register at 0x7e.
+		 * The temperature source is selected with register 0x7d.
+		 * Support it if the source differs from already reported
+		 * sources.
+		 */
+		reg = w83627ehf_read_value(data, 0x7d);
+		reg &= 0x07;
+		if (reg != data->temp_src[0] && reg != data->temp_src[1]
+		    && reg != data->temp_src[2]) {
+			data->temp_src[3] = reg;
+			data->have_temp |= 1 << 3;
+		}
+
+		/*
+		 * Chip supports either AUXTIN or VIN3. Try to find out which
+		 * one.
+		 */
+		reg = w83627ehf_read_value(data, W83627EHF_REG_TEMP_CONFIG[2]);
+		if (data->temp_src[2] == 2 && (reg & 0x01))
+			data->have_temp &= ~(1 << 2);
+
+		if ((data->temp_src[2] == 2 && (data->have_temp & (1 << 2)))
+		    || (data->temp_src[3] == 2 && (data->have_temp & (1 << 3))))
+			data->in6_skip = 1;
+
+		data->temp_label = w83667hg_b_temp_label;
+	} else {
+		/* Temperature sources are fixed */
+		for (i = 0; i < 3; i++) {
+			data->reg_temp[i] = W83627EHF_REG_TEMP[i];
+			data->reg_temp_over[i] = W83627EHF_REG_TEMP_OVER[i];
+			data->reg_temp_hyst[i] = W83627EHF_REG_TEMP_HYST[i];
+			data->reg_temp_config[i] = W83627EHF_REG_TEMP_CONFIG[i];
+		}
 	}
 
-	data->REG_FAN_START_OUTPUT = W83627EHF_REG_FAN_START_OUTPUT;
-	data->REG_FAN_STOP_OUTPUT = W83627EHF_REG_FAN_STOP_OUTPUT;
-	if (sio_data->kind == w83667hg_b) {
+	if (sio_data->kind == nct6775) {
+		data->has_fan_div = true;
+		data->fan_from_reg = fan_from_reg16;
+		data->fan_from_reg_min = fan_from_reg8;
+		data->REG_PWM = NCT6775_REG_PWM;
+		data->REG_TARGET = NCT6775_REG_TARGET;
+		data->REG_FAN = NCT6775_REG_FAN;
+		data->REG_FAN_MIN = W83627EHF_REG_FAN_MIN;
+		data->REG_FAN_START_OUTPUT = NCT6775_REG_FAN_START_OUTPUT;
+		data->REG_FAN_STOP_OUTPUT = NCT6775_REG_FAN_STOP_OUTPUT;
+		data->REG_FAN_STOP_TIME = NCT6775_REG_FAN_STOP_TIME;
+		data->REG_FAN_MAX_OUTPUT = NCT6775_REG_FAN_MAX_OUTPUT;
+		data->REG_FAN_STEP_OUTPUT = NCT6775_REG_FAN_STEP_OUTPUT;
+	} else if (sio_data->kind == nct6776) {
+		data->has_fan_div = false;
+		data->fan_from_reg = fan_from_reg13;
+		data->fan_from_reg_min = fan_from_reg13;
+		data->REG_PWM = NCT6775_REG_PWM;
+		data->REG_TARGET = NCT6775_REG_TARGET;
+		data->REG_FAN = NCT6775_REG_FAN;
+		data->REG_FAN_MIN = NCT6776_REG_FAN_MIN;
+		data->REG_FAN_START_OUTPUT = NCT6775_REG_FAN_START_OUTPUT;
+		data->REG_FAN_STOP_OUTPUT = NCT6775_REG_FAN_STOP_OUTPUT;
+		data->REG_FAN_STOP_TIME = NCT6775_REG_FAN_STOP_TIME;
+	} else if (sio_data->kind == w83667hg_b) {
+		data->has_fan_div = true;
+		data->fan_from_reg = fan_from_reg8;
+		data->fan_from_reg_min = fan_from_reg8;
+		data->REG_PWM = W83627EHF_REG_PWM;
+		data->REG_TARGET = W83627EHF_REG_TARGET;
+		data->REG_FAN = W83627EHF_REG_FAN;
+		data->REG_FAN_MIN = W83627EHF_REG_FAN_MIN;
+		data->REG_FAN_START_OUTPUT = W83627EHF_REG_FAN_START_OUTPUT;
+		data->REG_FAN_STOP_OUTPUT = W83627EHF_REG_FAN_STOP_OUTPUT;
+		data->REG_FAN_STOP_TIME = W83627EHF_REG_FAN_STOP_TIME;
 		data->REG_FAN_MAX_OUTPUT =
 		  W83627EHF_REG_FAN_MAX_OUTPUT_W83667_B;
 		data->REG_FAN_STEP_OUTPUT =
 		  W83627EHF_REG_FAN_STEP_OUTPUT_W83667_B;
 	} else {
+		data->has_fan_div = true;
+		data->fan_from_reg = fan_from_reg8;
+		data->fan_from_reg_min = fan_from_reg8;
+		data->REG_PWM = W83627EHF_REG_PWM;
+		data->REG_TARGET = W83627EHF_REG_TARGET;
+		data->REG_FAN = W83627EHF_REG_FAN;
+		data->REG_FAN_MIN = W83627EHF_REG_FAN_MIN;
+		data->REG_FAN_START_OUTPUT = W83627EHF_REG_FAN_START_OUTPUT;
+		data->REG_FAN_STOP_OUTPUT = W83627EHF_REG_FAN_STOP_OUTPUT;
+		data->REG_FAN_STOP_TIME = W83627EHF_REG_FAN_STOP_TIME;
 		data->REG_FAN_MAX_OUTPUT =
 		  W83627EHF_REG_FAN_MAX_OUTPUT_COMMON;
 		data->REG_FAN_STEP_OUTPUT =
@@ -1424,7 +2021,8 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev)
 	data->vrm = vid_which_vrm();
 	superio_enter(sio_data->sioreg);
 	/* Read VID value */
-	if (sio_data->kind == w83667hg || sio_data->kind == w83667hg_b) {
+	if (sio_data->kind == w83667hg || sio_data->kind == w83667hg_b ||
+	    sio_data->kind == nct6775 || sio_data->kind == nct6776) {
 		/* W83667HG has different pins for VID input and output, so
 		we can get the VID input values directly at logical device D
 		0xe3. */
@@ -1475,13 +2073,44 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev)
 	}
 
 	/* fan4 and fan5 share some pins with the GPIO and serial flash */
-	if (sio_data->kind == w83667hg || sio_data->kind == w83667hg_b) {
-		fan5pin = superio_inb(sio_data->sioreg, 0x27) & 0x20;
+	if (sio_data->kind == nct6775) {
+		/* On NCT6775, fan4 shares pins with the fdc interface */
+		fan3pin = 1;
+		fan4pin = !(superio_inb(sio_data->sioreg, 0x2A) & 0x80);
+		fan4min = 0;
+		fan5pin = 0;
+	} else if (sio_data->kind == nct6776) {
+		fan3pin = !(superio_inb(sio_data->sioreg, 0x24) & 0x40);
+		fan4pin = !!(superio_inb(sio_data->sioreg, 0x1C) & 0x01);
+		fan5pin = !!(superio_inb(sio_data->sioreg, 0x1C) & 0x02);
+		fan4min = fan4pin;
+	} else if (sio_data->kind == w83667hg || sio_data->kind == w83667hg_b) {
+		fan3pin = 1;
 		fan4pin = superio_inb(sio_data->sioreg, 0x27) & 0x40;
+		fan5pin = superio_inb(sio_data->sioreg, 0x27) & 0x20;
+		fan4min = fan4pin;
 	} else {
-		fan5pin = !(superio_inb(sio_data->sioreg, 0x24) & 0x02);
+		fan3pin = 1;
 		fan4pin = !(superio_inb(sio_data->sioreg, 0x29) & 0x06);
+		fan5pin = !(superio_inb(sio_data->sioreg, 0x24) & 0x02);
+		fan4min = fan4pin;
 	}
+
+	if (fan_debounce &&
+	    (sio_data->kind == nct6775 || sio_data->kind == nct6776)) {
+		u8 tmp;
+
+		superio_select(sio_data->sioreg, W83627EHF_LD_HWM);
+		tmp = superio_inb(sio_data->sioreg, NCT6775_REG_FAN_DEBOUNCE);
+		if (sio_data->kind == nct6776)
+			superio_outb(sio_data->sioreg, NCT6775_REG_FAN_DEBOUNCE,
+				     0x3e | tmp);
+		else
+			superio_outb(sio_data->sioreg, NCT6775_REG_FAN_DEBOUNCE,
+				     0x1e | tmp);
+		pr_info("Enabled fan debounce for chip %s\n", data->name);
+	}
+
 	superio_exit(sio_data->sioreg);
 
 	/* It looks like fan4 and fan5 pins can be alternatively used
@@ -1490,26 +2119,54 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev)
 	   connected fan5 as input unless they are emitting log 1, which
 	   is not the default. */
 
-	data->has_fan = 0x07; /* fan1, fan2 and fan3 */
-	i = w83627ehf_read_value(data, W83627EHF_REG_FANDIV1);
-	if ((i & (1 << 2)) && fan4pin)
-		data->has_fan |= (1 << 3);
-	if (!(i & (1 << 1)) && fan5pin)
-		data->has_fan |= (1 << 4);
+	data->has_fan = data->has_fan_min = 0x03; /* fan1 and fan2 */
+
+	data->has_fan |= (fan3pin << 2);
+	data->has_fan_min |= (fan3pin << 2);
+
+	/*
+	 * NCT6775F and NCT6776F don't have the W83627EHF_REG_FANDIV1 register
+	 */
+	if (sio_data->kind == nct6775 || sio_data->kind == nct6776) {
+		data->has_fan |= (fan4pin << 3) | (fan5pin << 4);
+		data->has_fan_min |= (fan4min << 3) | (fan5pin << 4);
+	} else {
+		i = w83627ehf_read_value(data, W83627EHF_REG_FANDIV1);
+		if ((i & (1 << 2)) && fan4pin) {
+			data->has_fan |= (1 << 3);
+			data->has_fan_min |= (1 << 3);
+		}
+		if (!(i & (1 << 1)) && fan5pin) {
+			data->has_fan |= (1 << 4);
+			data->has_fan_min |= (1 << 4);
+		}
+	}
 
 	/* Read fan clock dividers immediately */
-	w83627ehf_update_fan_div(data);
+	w83627ehf_update_fan_div_common(dev, data);
+
+	/* Read pwm data to save original values */
+	w83627ehf_update_pwm_common(dev, data);
+	for (i = 0; i < data->pwm_num; i++)
+		data->pwm_enable_orig[i] = data->pwm_enable[i];
+
+	/* Read pwm data to save original values */
+	w83627ehf_update_pwm_common(dev, data);
+	for (i = 0; i < data->pwm_num; i++)
+		data->pwm_enable_orig[i] = data->pwm_enable[i];
 
 	/* Register sysfs hooks */
-  	for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays); i++)
-		if ((err = device_create_file(dev,
-			&sda_sf3_arrays[i].dev_attr)))
+	for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays); i++) {
+		err = device_create_file(dev, &sda_sf3_arrays[i].dev_attr);
+		if (err)
 			goto exit_remove;
+	}
 
 	for (i = 0; i < ARRAY_SIZE(sda_sf3_max_step_arrays); i++) {
 		struct sensor_device_attribute *attr =
 		  &sda_sf3_max_step_arrays[i];
-		if (data->REG_FAN_STEP_OUTPUT[attr->index] != 0xff) {
+		if (data->REG_FAN_STEP_OUTPUT &&
+		    data->REG_FAN_STEP_OUTPUT[attr->index] != 0xff) {
 			err = device_create_file(dev, &attr->dev_attr);
 			if (err)
 				goto exit_remove;
@@ -1518,8 +2175,9 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev)
 	/* if fan4 is enabled create the sf3 files for it */
 	if ((data->has_fan & (1 << 3)) && data->pwm_num >= 4)
 		for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays_fan4); i++) {
-			if ((err = device_create_file(dev,
-				&sda_sf3_arrays_fan4[i].dev_attr)))
+			err = device_create_file(dev,
+					&sda_sf3_arrays_fan4[i].dev_attr);
+			if (err)
 				goto exit_remove;
 		}
 
@@ -1541,12 +2199,20 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev)
 			if ((err = device_create_file(dev,
 					&sda_fan_input[i].dev_attr))
 				|| (err = device_create_file(dev,
-					&sda_fan_alarm[i].dev_attr))
-				|| (err = device_create_file(dev,
-					&sda_fan_div[i].dev_attr))
-				|| (err = device_create_file(dev,
-					&sda_fan_min[i].dev_attr)))
+					&sda_fan_alarm[i].dev_attr)))
 				goto exit_remove;
+			if (sio_data->kind != nct6776) {
+				err = device_create_file(dev,
+						&sda_fan_div[i].dev_attr);
+				if (err)
+					goto exit_remove;
+			}
+			if (data->has_fan_min & (1 << i)) {
+				err = device_create_file(dev,
+						&sda_fan_min[i].dev_attr);
+				if (err)
+					goto exit_remove;
+			}
 			if (i < data->pwm_num &&
 				((err = device_create_file(dev,
 					&sda_pwm[i].dev_attr))
@@ -1562,16 +2228,33 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev)
 		}
 	}
 
-	for (i = 0; i < 3; i++) {
-		if ((i == 2) && data->temp3_disable)
+	for (i = 0; i < NUM_REG_TEMP; i++) {
+		if (!(data->have_temp & (1 << i)))
+			continue;
+		err = device_create_file(dev, &sda_temp_input[i].dev_attr);
+		if (err)
+			goto exit_remove;
+		if (data->temp_label) {
+			err = device_create_file(dev,
+						 &sda_temp_label[i].dev_attr);
+			if (err)
+				goto exit_remove;
+		}
+		if (data->reg_temp_over[i]) {
+			err = device_create_file(dev,
+				&sda_temp_max[i].dev_attr);
+			if (err)
+				goto exit_remove;
+		}
+		if (data->reg_temp_hyst[i]) {
+			err = device_create_file(dev,
+				&sda_temp_max_hyst[i].dev_attr);
+			if (err)
+				goto exit_remove;
+		}
+		if (i > 2)
 			continue;
 		if ((err = device_create_file(dev,
-				&sda_temp_input[i].dev_attr))
-			|| (err = device_create_file(dev,
-				&sda_temp_max[i].dev_attr))
-			|| (err = device_create_file(dev,
-				&sda_temp_max_hyst[i].dev_attr))
-			|| (err = device_create_file(dev,
 				&sda_temp_alarm[i].dev_attr))
 			|| (err = device_create_file(dev,
 				&sda_temp_type[i].dev_attr)))
@@ -1632,6 +2315,8 @@ static int __init w83627ehf_find(int sioaddr, unsigned short *addr,
 	static const char __initdata sio_name_W83627DHG_P[] = "W83627DHG-P";
 	static const char __initdata sio_name_W83667HG[] = "W83667HG";
 	static const char __initdata sio_name_W83667HG_B[] = "W83667HG-B";
+	static const char __initdata sio_name_NCT6775[] = "NCT6775F";
+	static const char __initdata sio_name_NCT6776[] = "NCT6776F";
 
 	u16 val;
 	const char *sio_name;
@@ -1668,6 +2353,14 @@ static int __init w83627ehf_find(int sioaddr, unsigned short *addr,
 		sio_data->kind = w83667hg_b;
 		sio_name = sio_name_W83667HG_B;
 		break;
+	case SIO_NCT6775_ID:
+		sio_data->kind = nct6775;
+		sio_name = sio_name_NCT6775;
+		break;
+	case SIO_NCT6776_ID:
+		sio_data->kind = nct6776;
+		sio_name = sio_name_NCT6776;
+		break;
 	default:
 		if (val != 0xffff)
 			pr_debug("unsupported chip ID: 0x%04x\n", val);
@@ -1689,7 +2382,8 @@ static int __init w83627ehf_find(int sioaddr, unsigned short *addr,
 	/* Activate logical device if needed */
 	val = superio_inb(sioaddr, SIO_REG_ENABLE);
 	if (!(val & 0x01)) {
-		pr_warn("Forcibly enabling Super-I/O. Sensor is probably unusable.\n");
+		pr_warn("Forcibly enabling Super-I/O. "
+			"Sensor is probably unusable.\n");
 		superio_outb(sioaddr, SIO_REG_ENABLE, val | 0x01);
 	}
 
@@ -1726,7 +2420,8 @@ static int __init sensors_w83627ehf_init(void)
 	if (err)
 		goto exit;
 
-	if (!(pdev = platform_device_alloc(DRVNAME, address))) {
+	pdev = platform_device_alloc(DRVNAME, address);
+	if (!pdev) {
 		err = -ENOMEM;
 		pr_err("Device allocation failed\n");
 		goto exit_unregister;
author	Linus Torvalds <torvalds@linux-foundation.org>	2011-03-17 16:59:38 -0700
committer	Linus Torvalds <torvalds@linux-foundation.org>	2011-03-17 16:59:38 -0700
commit	19520fc1ee36164808e6f084bd95e8178e2db231 (patch)
tree	abf66f8c2a2b35e574e9452673263614fc50c63f /drivers
parent	c8def554d031664e984323f6a5d667f070717776 (diff)
parent	d668a8b022a201e65ec5e301a9e6dff78987550c (diff)