merge linus head to drm-mm branch

3 files changed, 10 insertions, 6 deletions

diff --git a/drivers/char/drm/mga_drv.h b/drivers/char/drm/mga_drv.h
index 474853deecfa..461728e6a58a 100644
--- a/drivers/char/drm/mga_drv.h
+++ b/drivers/char/drm/mga_drv.h
@@ -228,7 +228,7 @@ static inline u32 _MGA_READ(u32 * addr)
 #define MGA_EMIT_STATE( dev_priv, dirty )				\
 do {									\
 	if ( (dirty) & ~MGA_UPLOAD_CLIPRECTS ) {			\
-		if ( dev_priv->chipset == MGA_CARD_TYPE_G400 ) {	\
+		if ( dev_priv->chipset >= MGA_CARD_TYPE_G400 ) {	\
 			mga_g400_emit_state( dev_priv );		\
 		} else {						\
 			mga_g200_emit_state( dev_priv );		\
diff --git a/drivers/char/drm/mga_state.c b/drivers/char/drm/mga_state.c
index ee77685069d0..47f54b5ae956 100644
--- a/drivers/char/drm/mga_state.c
+++ b/drivers/char/drm/mga_state.c
@@ -53,7 +53,7 @@ static void mga_emit_clip_rect(drm_mga_private_t * dev_priv,
 
 	/* Force reset of DWGCTL on G400 (eliminates clip disable bit).
 	 */
-	if (dev_priv->chipset == MGA_CARD_TYPE_G400) {
+	if (dev_priv->chipset >= MGA_CARD_TYPE_G400) {
 		DMA_BLOCK(MGA_DWGCTL, ctx->dwgctl,
 			  MGA_LEN + MGA_EXEC, 0x80000000,
 			  MGA_DWGCTL, ctx->dwgctl,
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
index 429820e48c69..7de19a84dc74 100644
--- a/drivers/message/fusion/mptsas.c
+++ b/drivers/message/fusion/mptsas.c
@@ -257,8 +257,8 @@ static void mptsas_print_device_pg0(SasDevicePage0_t *pg0)
 	printk("SAS Address=0x%llX\n", le64_to_cpu(sas_address));
 	printk("Target ID=0x%X\n", pg0->TargetID);
 	printk("Bus=0x%X\n", pg0->Bus);
-	printk("PhyNum=0x%X\n", pg0->PhyNum);
-	printk("AccessStatus=0x%X\n", le16_to_cpu(pg0->AccessStatus));
+	printk("Parent Phy Num=0x%X\n", pg0->PhyNum);
+	printk("Access Status=0x%X\n", le16_to_cpu(pg0->AccessStatus));
 	printk("Device Info=0x%X\n", le32_to_cpu(pg0->DeviceInfo));
 	printk("Flags=0x%X\n", le16_to_cpu(pg0->Flags));
 	printk("Physical Port=0x%X\n", pg0->PhysicalPort);
@@ -270,7 +270,7 @@ static void mptsas_print_expander_pg1(SasExpanderPage1_t *pg1)
 	printk("---- SAS EXPANDER PAGE 1 ------------\n");
 
 	printk("Physical Port=0x%X\n", pg1->PhysicalPort);
-	printk("PHY Identifier=0x%X\n", pg1->Phy);
+	printk("PHY Identifier=0x%X\n", pg1->PhyIdentifier);
 	printk("Negotiated Link Rate=0x%X\n", pg1->NegotiatedLinkRate);
 	printk("Programmed Link Rate=0x%X\n", pg1->ProgrammedLinkRate);
 	printk("Hardware Link Rate=0x%X\n", pg1->HwLinkRate);
@@ -604,7 +604,7 @@ mptsas_sas_expander_pg1(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info,
 	mptsas_print_expander_pg1(buffer);
 
 	/* save config data */
-	phy_info->phy_id = buffer->Phy;
+	phy_info->phy_id = buffer->PhyIdentifier;
 	phy_info->port_id = buffer->PhysicalPort;
 	phy_info->negotiated_link_rate = buffer->NegotiatedLinkRate;
 	phy_info->programmed_link_rate = buffer->ProgrammedLinkRate;
@@ -825,6 +825,8 @@ mptsas_probe_hba_phys(MPT_ADAPTER *ioc, int *index)
 		mptsas_sas_device_pg0(ioc, &port_info->phy_info[i].identify,
 			(MPI_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE <<
 			 MPI_SAS_DEVICE_PGAD_FORM_SHIFT), handle);
+		port_info->phy_info[i].identify.phy_id =
+		    port_info->phy_info[i].phy_id;
 		handle = port_info->phy_info[i].identify.handle;
 
 		if (port_info->phy_info[i].attached.handle) {
@@ -881,6 +883,8 @@ mptsas_probe_expander_phys(MPT_ADAPTER *ioc, u32 *handle, int *index)
 				(MPI_SAS_DEVICE_PGAD_FORM_HANDLE <<
 				 MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
 				port_info->phy_info[i].identify.handle);
+			port_info->phy_info[i].identify.phy_id =
+			    port_info->phy_info[i].phy_id;
 		}
 
 		if (port_info->phy_info[i].attached.handle) {