diff options
| author | Jiri Kosina <jkosina@suse.cz> | 2010-03-08 16:55:37 +0100 |
|---|---|---|
| committer | Jiri Kosina <jkosina@suse.cz> | 2010-03-08 16:55:37 +0100 |
| commit | 318ae2edc3b29216abd8a2510f3f80b764f06858 (patch) | |
| tree | ce595adde342f57f379d277b25e4dd206988a052 /drivers | |
| parent | 25cf84cf377c0aae5dbcf937ea89bc7893db5176 (diff) | |
| parent | 3e58974027b04e84f68b964ef368a6cd758e2f84 (diff) | |
Merge branch 'for-next' into for-linus
Conflicts:
Documentation/filesystems/proc.txt
arch/arm/mach-u300/include/mach/debug-macro.S
drivers/net/qlge/qlge_ethtool.c
drivers/net/qlge/qlge_main.c
drivers/net/typhoon.c
Diffstat (limited to 'drivers')
127 files changed, 163 insertions, 1525 deletions
diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c index b2586f57e1f5..d9a85f1ddde6 100644 --- a/drivers/acpi/dock.c +++ b/drivers/acpi/dock.c @@ -605,7 +605,7 @@ register_hotplug_dock_device(acpi_handle handle, struct acpi_dock_ops *ops, list_for_each_entry(dock_station, &dock_stations, sibling) { /* * An ATA bay can be in a dock and itself can be ejected - * seperately, so there are two 'dock stations' which need the + * separately, so there are two 'dock stations' which need the * ops */ dd = find_dock_dependent_device(dock_station, handle); diff --git a/drivers/acpi/proc.c b/drivers/acpi/proc.c index d0d25e2e1ced..1ac678d2c51c 100644 --- a/drivers/acpi/proc.c +++ b/drivers/acpi/proc.c @@ -435,7 +435,7 @@ acpi_system_write_wakeup_device(struct file *file, found_dev->wakeup.gpe_device)) { printk(KERN_WARNING "ACPI: '%s' and '%s' have the same GPE, " - "can't disable/enable one seperately\n", + "can't disable/enable one separately\n", dev->pnp.bus_id, found_dev->pnp.bus_id); dev->wakeup.state.enabled = found_dev->wakeup.state.enabled; diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 9c77b0d1a9d0..4a28420efff2 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -2232,7 +2232,7 @@ retry: * Some drives were very specific about that exact sequence. * * Note that ATA4 says lba is mandatory so the second check - * shoud never trigger. + * should never trigger. */ if (ata_id_major_version(id) < 4 || !ata_id_has_lba(id)) { err_mask = ata_dev_init_params(dev, id[3], id[6]); diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 02441fd57e9e..561dec2481cb 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -2287,7 +2287,7 @@ EXPORT_SYMBOL_GPL(ata_sff_postreset); * @qc: command * * Drain the FIFO and device of any stuck data following a command - * failing to complete. In some cases this is neccessary before a + * failing to complete. In some cases this is necessary before a * reset will recover the device. * */ diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c index 294f3020a78a..8e5e13210426 100644 --- a/drivers/ata/pata_acpi.c +++ b/drivers/ata/pata_acpi.c @@ -161,7 +161,7 @@ static void pacpi_set_dmamode(struct ata_port *ap, struct ata_device *adev) * * Called when the libata layer is about to issue a command. We wrap * this interface so that we can load the correct ATA timings if - * neccessary. + * necessary. */ static unsigned int pacpi_qc_issue(struct ata_queued_cmd *qc) diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c index c86c71639a95..727a81ce4c9f 100644 --- a/drivers/ata/pata_hpt3x3.c +++ b/drivers/ata/pata_hpt3x3.c @@ -180,7 +180,7 @@ static void hpt3x3_init_chipset(struct pci_dev *dev) * @id: Entry in match table * * Perform basic initialisation. We set the device up so we access all - * ports via BAR4. This is neccessary to work around errata. + * ports via BAR4. This is necessary to work around errata. */ static int hpt3x3_init_one(struct pci_dev *pdev, const struct pci_device_id *id) diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index 36103531feeb..147de2fd66d2 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -131,7 +131,7 @@ static unsigned int ata_data_xfer_8bit(struct ata_device *dev, * @qc: command * * Drain the FIFO and device of any stuck data following a command - * failing to complete. In some cases this is neccessary before a + * failing to complete. In some cases this is necessary before a * reset will recover the device. * */ diff --git a/drivers/block/drbd/drbd_int.h b/drivers/block/drbd/drbd_int.h index 2bf3a6ef3684..d9301e861d9f 100644 --- a/drivers/block/drbd/drbd_int.h +++ b/drivers/block/drbd/drbd_int.h @@ -95,7 +95,7 @@ extern char usermode_helper[]; /* All EEs on the free list should have ID_VACANT (== 0) * freshly allocated EEs get !ID_VACANT (== 1) - * so if it says "cannot dereference null pointer at adress 0x00000001", + * so if it says "cannot dereference null pointer at address 0x00000001", * it is most likely one of these :( */ #define ID_IN_SYNC (4711ULL) @@ -1171,7 +1171,7 @@ extern int drbd_bitmap_io(struct drbd_conf *mdev, int (*io_fn)(struct drbd_conf /* Meta data layout We reserve a 128MB Block (4k aligned) * either at the end of the backing device - * or on a seperate meta data device. */ + * or on a separate meta data device. */ #define MD_RESERVED_SECT (128LU << 11) /* 128 MB, unit sectors */ /* The following numbers are sectors */ diff --git a/drivers/block/drbd/drbd_req.h b/drivers/block/drbd/drbd_req.h index f22c1bc8ec7e..16119d7056cc 100644 --- a/drivers/block/drbd/drbd_req.h +++ b/drivers/block/drbd/drbd_req.h @@ -57,7 +57,7 @@ * * It may me handed over to the local disk subsystem. * It may be completed by the local disk subsystem, - * either sucessfully or with io-error. + * either successfully or with io-error. * In case it is a READ request, and it failed locally, * it may be retried remotely. * diff --git a/drivers/char/ChangeLog b/drivers/char/ChangeLog deleted file mode 100644 index 56b8a2e76ab1..000000000000 --- a/drivers/char/ChangeLog +++ /dev/null @@ -1,775 +0,0 @@ -2001-08-11 Tim Waugh <twaugh@redhat.com> - - * serial.c (get_pci_port): Deal with awkward Titan cards. - -1998-08-26 Theodore Ts'o <tytso@rsts-11.mit.edu> - - * serial.c (rs_open): Correctly decrement the module in-use count - on errors. - -Thu Feb 19 14:24:08 1998 Theodore Ts'o <tytso@rsts-11.mit.edu> - - * tty_io.c (tty_name): Remove the non-reentrant (and non-SMP safe) - version of tty_name, and rename the reentrant _tty_name - function to be tty_name. - (tty_open): Add a warning message stating callout devices - are deprecated. - -Mon Dec 1 08:24:15 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> - - * tty_io.c (tty_get_baud_rate): Print a warning syslog if the - tty->alt_speed kludge is used; this means the system is - using the deprecated SPD_HI ioctls. - -Mon Nov 24 10:37:49 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> - - * serial.c, esp.c, rocket.c: Change drivers to take advantage of - tty_get_baud_rate(). - - * tty_io.c (tty_get_baud_rate): New function which computes the - correct baud rate for the tty. More factoring out of - common code out of the serial driver to the high-level tty - functions.... - -Sat Nov 22 07:53:36 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> - - * serial.c, esp.c, rocket.c: Add tty->driver.break() routine, and - allow high-level tty code to handle the break and soft - carrier ioctls. - - * tty_ioctl.c (n_tty_ioctl): Support TIOCGSOFTCAR and - TIOCSSOFTCAR, so that device drivers don't have to support - it. - - * serial.c (autoconfig): Change 16750 test to hopefully eliminate - false results by people with strange 16550As being - detected as 16750s. Hopefully 16750s will still be - detected as 16750, and other weird UARTs won't get poorly - autodetected. If this doesn't work, I'll have to disable - the auto identification for the 16750. - - * tty_io.c (tty_hangup): Now actually do the tty hangup - processing during the timer processing, and disable - interrupts while doing the hangup processing. This avoids - several nasty race conditions which happened when the - hangup processing was done asynchronously. - (tty_ioctl): Do break handling in the tty driver if - driver's break function is supported. - (tty_flip_buffer_push): New exported function which should - be used by drivers to push characters in the flip buffer - to the tty handler. This may either be done using a task - queue function for better CPU efficiency, or directly for - low latency operation. - - * serial.c (rs_set_termios): Fix bug rs_set_termios when - transitioning away from B0, submitted by Stanislav - Voronyi. - -Thu Jun 19 20:05:58 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> - - * serial.c (begin_break, end_break, rs_ioctl): Applied patch - to support BSD ioctls to set and clear the break - condition explicitly. - - * console.c (scrup, scrdown, insert_line, delete_line): Applied - fix suggested by Aaron Tiensivu to speed up block scrolls - up and down. - - * n_tty.c (opost_block, write_chan): Added a modified "fast - console" patch which processes a block of text via - "cooking" efficiently. - -Wed Jun 18 15:25:50 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> - - * tty_io.c (init_dev, release_dev): Applied fix suggested by Bill - Hawes to prevent race conditions in the tty code. - - * n_tty.c (n_tty_chars_in_buffer): Applied fix suggested by Bill - Hawes so that n_tty_chars_in_buffer returns the correct - value in the case when the tty is in cannonical mode. (To - avoid a pty deadlock with telnetd.) - -Thu Feb 27 01:53:08 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> - - * serial.c (change_speed): Add support for the termios flag - CMSPAR, which allows the user to select stick parity. - (i.e, if PARODD is set, the parity bit is always 1; if - PARRODD is not set, then the parity bit is always 0). - -Wed Feb 26 19:03:10 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> - - * serial.c (cleanup_module): Fix memory leak when using the serial - driver as a module; make sure tmp_buf gets freed! - -Tue Feb 25 11:01:59 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> - - * serial.c (set_modem_info): Add support for setting and clearing - the OUT1 and OUT2 bits. (For special case UART's, usually - for half-duplex.) - (autoconfig, change_speed): Fix TI 16750 support. - -Sun Feb 16 00:14:43 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> - - * tty_io.c (release_dev): Add sanity check to make sure there are - no waiters on tty->read_wait or tty->write_wait. - - * serial.c (rs_init): Don't autoconfig a device if the I/O region - is already reserved. - - * serial.c (serial_proc_info): Add support for /proc/serial. - -Thu Feb 13 00:49:10 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> - - * serial.c (receive_chars): When the UART repotrs an overrun - condition, it does so with a valid character. Changed to - not throw away the valid character, but instead report the - overrun after the valid character. - - * serial.c: Added new #ifdef's for some of the advanced serial - driver features. A minimal driver that only supports COM - 1/2/3/4 without sharing serial interrupts only takes 17k; - the full driver takes 32k. - -Wed Feb 12 14:50:44 1997 Theodore Ts'o <tytso@rsts-11.mit.edu> - - * vt.c: - * pty.c: - * tty_ioctl.c: - * serial.c: Update routines to use the new 2.1 memory access - routines. - -Wed Dec 4 07:51:52 1996 Theodore Ts'o <tytso@localhost.mit.edu> - - * serial.c (change_speed): Use save_flags(); cli() and - restore_flags() in order to ensure we don't accidentally - turn on interrupts when starting up the port. - (startup): Move the insertion of serial structure into the - IRQ chain earlier into the startup processing. Interrupts - should be off this whole time, but we eventually will want - to reduce this window. - -Thu Nov 21 10:05:22 1996 Theodore Ts'o <tytso@localhost.mit.edu> - - * tty_ioctl.c (tty_wait_until_sent): Always check the driver - wait_until_ready routine, even if there are no characters - in the xmit buffer. (There may be charactes in the device - FIFO.) - (n_tty_ioctl): Add new flag tty->flow_stopped which - indicates whether the tty is stopped due to a request by - the TCXONC ioctl (used by tcflow). If so, don't let an - incoming XOFF character restart the tty. The tty can only - be restarted by another TCXONC request. - - * tty_io.c (start_tty): Don't allow the tty to be restarted if - tty->flow_stopped is true. - - * n_tty.c (n_tty_receive_char): If tty->flow_stopped is true, and - IXANY is set, don't eat a character trying to restart the - tty. - - * serial.c (startup): Remove need for MCR_noint from the - async_struct structure. Only turn on DTR and RTS if the - baud rate is not zero. - (change_speed): More accurately calculate the timeout - value based on the word size. Move responsibility of - hangup when speed becomes B0 to rs_set_termios() - (set_serial_info): When changing the UART type set the - current xmit_fifo_size as well as the permanent - xmit_fifo_size. - (rs_ioctl): Fix TCSBRK (used by tcdrain) and TCSBRKP - ioctls to return EINTR if interrupted by a signal. - (rs_set_termios): If the baud rate changes to or from B0, - this function is now responsible for setting or clearing - DTR and RTS. DTR and RTS are only be changed on the - transition to or from the B0 state. - (rs_close): Wait for the characters to drain based on - info->timeout. At low baud rates (50 bps), it may take a - long time for the FIFO to completely drain out! - (rs_wait_until_sent): Fixed timeout handling. Now - releases control to the scheduler, but checks frequently - enough so that the function is sensitive enough to pass - the timing requirements of the NIST-PCTS. - (block_til_ready): When opening the device, don't turn on - DTR and RTS if the baud rate is B0. - -Thu Nov 14 00:06:09 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> - - * serial.c (autoconfig): Fix autoconfiguration problems; - info->flags wasn't getting initialized from the state - structure. Put in more paranoid test for the 16750. - -Fri Nov 8 20:19:50 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> - - * n_tty.c (n_tty_flush_buffer): Only call driver->unthrottle() if - the tty was previous throttled. - (n_tty_set_termios, write_chan): Add changes suggested by - Simon P. Allen to allow hardware cooking. - - * tty_ioctl.c (set_termios): If we get a signal while waiting for - the tty to drain, return -EINTR. - - * serial.c (change_speed): Add support for CREAD, as required by - POSIX. - -Sat Nov 2 20:43:10 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> - - * serial.c: Wholesale changes. Added support for the Startech - 16650 and 16650V2 chips. (WARNING: the new startech - 16650A may or may not work!) Added support for the - TI16750 (not yet tested). Split async_struct into a - transient part (async_struct) and a permanent part - (serial_state) which contains the configuration - information for the ports. Added new driver routines - wait_until_sent() and send_xchar() to help with POSIX - compliance. Added support for radio clocks which waggle - the carrier detect line (CONFIG_HARD_PPS). - - * tty_ioctl.c (tty_wait_until_sent): Added call to new driver - function tty->driver.wait_until_sent(), which returns when - the tty's device xmit buffers are drained. Needed for - full POSIX compliance. - - (send_prio_char): New function, called by the ioctl's - TCIOFF and TCION; uses the new driver call send_xchar(), - which will send the XON or XOFF character at high priority - (and even if tty output is stopped). - -Wed Jun 5 18:52:04 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> - - * pty.c (pty_close): When closing a pty, make sure packet mode is - cleared. - -Sun May 26 09:33:52 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> - - * vesa_blank.c (set_vesa_blanking): Add missing verify_area() call. - - * selection.c (set_selection): Add missing verify_area() call. - - * tty_io.c (tty_ioctl): Add missing verify_area() calls. - - * serial.c (rs_ioctl): Add missing verify_area() calls. - (rs_init): Allow initialization of serial driver - configuration from a module. - - * random.c (extract_entropy): Add missing verify_area call. - Don't limit number of characters returned to - 32,768. Extract entropy is now no longer a inlined - function. - - (random_read): Check return value in case extract_entropy - returns an error. - - (secure_tcp_sequence_number): New function which returns a - secure TCP sequence number. This is needed to prevent some - nasty TCP hijacking attacks. - - (init_std_data): Initialize using gettimeofday() instead of - struct timeval xtime. - - (fast_add_entropy_word, add_entropy_word): Rename the - inline function add_entropy_word() to - fast_add_entropy_word(). Make add_entropy_word() be the - non-inlined function which is used in non-timing critical - places, in order to save space. - - (initialize_benchmark, begin_benchmark, end_benchmark): New - functions defined when RANDOM_BENCHMARK is defined. They - allow us to benchmark the speed of the - add_timer_randomness() call. - - (int_ln, rotate_left): Add two new inline functions with - i386 optimized asm instructions. This speeds up the - critical add_entropy_word() and add_timer_randomness() - functions, which are called from interrupt handlers. - -Tue May 7 22:51:11 1996 <tytso@rsts-11.mit.edu> - - * random.c (add_timer_randomness): Limit the amount randomness - that we estimate to 12 bits. (An arbitrary amount). - - (extract_entropy): To make it harder to analyze the hash - function, fold the hash function in half using XOR, and - use the folded result as the value to emit to the user. - Also, add timer randomness each pass through the - exact_entropy call, to increase the amount of unknown - values during the extraction process. - - (random_ioctl): Use IOR/IOW definitions to define the - ioctl values used by the /dev/random driver. Allow the - old ioctl values to be used for backwards compatibility - (for a limited amount of time). - -Wed Apr 24 14:02:04 1996 Theodore Ts'o <tytso@rsts-11.mit.edu> - - * random.c (add_timer_randomness): Use 2nd derivative as well to - better estimate entropy. - - (rand_initialize): Explicitly initialize all the pointers - to NULL. (Clearing pointers using memset isn't portable.) - Initialize the random pool with OS-dependent data. - - (random_write): Add sanity checking to the arguments to - random_write(), so that bad arguments won't cause a kernel - SEGV. - - (random_read): Update the access time of the device inode - when you return data to the user. - - (random_ioctl): Wake up the random_wait channel when there - are only WAIT_INPUT_BITS available. Add more paranoia - checks to make sure entropy_count doesn't go beyond the - bounds of (0, POOLSIZE). Add a few missing verify_area - checks. Add support for the RNDCLEARPOOL ioctl, which - zaps the random pool. - - (add_timer_randomness): Wake up the random_wait - channel only when there are WAIT_INPUT_BITS available. - - (random_select): Allow a random refresh daemon process to - select on /dev/random for writing; wake up the daemon when - there are less than WAIT_OUTPUT_BITS bits of randomness - available. - -Tue Apr 23 22:56:07 1996 <tytso@rsts-11.mit.edu> - - * tty_io.c (init_dev): Change return code when user attempts to - open master pty which is already open from EAGAIN to EIO, - to match with BSD expectations. EIO is more correct - anyway, since EAGAIN implies that retrying will be - successful --- which it might be.... Eventually!! - - * pty.c (pty_open, pty_close): Fix wait loop so that we don't - busy loop while waiting for the master side to open. - Fix tty opening/closing logic. TTY_SLAVE_CLOSED was - renamed to TTY_OTHER_CLOSED, so that the name is more - descriptive. Also fixed code so that the tty flag - actually works correctly now.... - -Mon Apr 1 10:22:01 1996 <tytso@rsts-11.mit.edu> - - * serial.c (rs_close): Cleaned up modularization changes. - Remove code which forced line discipline back to N_TTY - this is done in the tty upper layers, and there's no - reason to do it here. (Making this change also - removed the requirement that the serial module access - the internal kernel symbol "ldiscs".) - - * tty_io.c (tty_init): Formally register a tty_driver entry for - /dev/tty (device 4, 0) and /dev/console (device 5, 0). - This guarantees that major device numbers 4 and 5 will be - reserved for the tty subsystem (as they have to be because - of /dev/tty and /dev/console). Removed tty_regdev, as - this interface is no longer necessary. - -Sun Mar 17 20:42:47 GMT 1996 <ah@doc.ic.ac.uk> - - * serial.c : modularisation (changes in linux/fs/device.c allow - kerneld to automatically load the serial module). - - * Makefile, Config.in : serial modularisation adds. - - * tty_io.c : tty_init_ctty used by to register "cua" driver just - for the /dev/tty device (5,0). Added tty_regdev. - - * serial.c (shutdown, rs_ioctl) : when port shuts down wakeup processes - waiting on delta_msr_wait. The TIOCMIWAIT ioctl returns EIO - if no change was done since the time of call. - -Sat Mar 16 14:33:13 1996 <aeb@cwi.nl> - - * tty_io.c (disassociate_ctty): If disassociate_ctty is called by - exit, do not perform an implicit vhangup on a pty. - -Fri Feb 9 14:15:47 1996 <tytso@rsts-11.mit.edu> - - * serial.c (block_til_ready): Fixed another race condition which - happens if a hangup happens during the open. - -Wed Jan 10 10:08:00 1996 <tytso@rsts-11.mit.edu> - - * serial.c (block_til_ready): Remove race condition which happened - if a hangup condition happened during the setup of the - UART, before rs_open() called block_til_ready(). This - caused the info->count counter to be erroneously - decremented. - - * serial.c (startup, rs_open): Remove race condition that could - cause a memory leak of one page. (Fortunately, both race - conditions were relatively rare in practice.) - -Tue Dec 5 13:21:27 1995 <tytso@rsts-11.mit.edu> - - * serial.c (check_modem_status, rs_ioctl): Support the new - ioctl()'s TIOCGICOUNT, TIOCMIWAIT. These allow an - application program to wait on a modem serial register - status bit change, and to find out how many changes have - taken place for the MSR bits. - - (rs_write): Eliminate a race condition which is introduced - if it is necessary to wait for the semaphore. - -Sat Nov 4 17:14:45 1995 <tytso@rsts-11.mit.edu> - - * tty_io.c (tty_init): Move registration of TTY_MAJOR and - TTY_AUX_MAJOR to the end, so that /proc/devices looks - prettier. - - * pty.c (pty_init): Use new major numbers for PTY master and slave - devices. This allow us to have more than 64 pty's. We - register the old pty devices for backwards compatibility. - Note that a system should either be using the old pty - devices or the new pty devices --- in general, it should - try to use both, since they map into the same pty table. - The old pty devices are strictly for backwards compatibility. - -Wed Oct 11 12:45:24 1995 <tytso@rsts-11.mit.edu> - - * tty_io.c (disassociate_ctty): If disassociate_ctty is called by - exit, perform an implicit vhangup on the tty. - - * pty.c (pty_close): When the master pty is closed, send a hangup - to the slave pty. - (pty_open): Use the flag TTY_SLAVE_CLOSED to test to see - if there are any open slave ptys, instead of using - tty->link->count. The old method got confused if there - were processes that had hung-up file descriptors on the - slave tty. - -Tue May 2 00:53:25 1995 <tytso@rsx-11.mit.edu> - - * tty_io.c (tty_set_ldisc): Wait until the output buffer is - drained before closing the old line discipline --- needed - in only one case: XON/XOFF processing. - - * n_tty.c (n_tty_close): Don't bother waiting until the output - driver is closed; in general, the line discipline - shouldn't care if the hardware is finished - transmitting before the line discipline terminates. - - * tty_io.c (release_dev): Shutdown the line discipline after - decrementing the tty count variable; but set the - TTY_CLOSING flag so that we know that this tty structure - isn't long for this world. - - * tty_io.c (init_dev): Add sanity code to check to see if - TTY_CLOSING is set on a tty structure; if so, something - bad has happened (probably a line discipline close blocked - when it shouldn't have; so do a kernel printk and then - return an error). - -Wed Apr 26 10:23:44 1995 Theodore Y. Ts'o <tytso@localhost> - - * tty_io.c (release_dev): Try to shutdown the line discipline - *before* decrementing the tty count variable; this removes - a potential race condition which occurs when the line - discipline close blocks, and another process then tries - open the same serial port. - - * serial.c (rs_hangup): When hanging up, flush the output buffer - before shutting down the UART. Otherwise the line - discipline close blocks waiting for the characters to get - flushed, which never happens until the serial port gets reused. - -Wed Apr 12 08:06:16 1995 Theodore Y. Ts'o <tytso@localhost> - - * serial.c (do_serial_hangup, do_softint, check_modem_status, - rs_init): Hangups are now scheduled via a separate tqueue - structure in the async_struct structure, tqueue_hangup. - This task is pushed on to the tq_schedule queue, so that - it is processed synchronously by the scheduler. - -Sat Feb 18 12:13:51 1995 Theodore Y. Ts'o (tytso@rt-11) - - * tty_io.c (disassociate_ctty, tty_open, tty_ioctl): Clear - current->tty_old_pgrp field when a session leader - acquires a controlling tty, and after a session leader - has disassociated from a controlling tty. - -Fri Feb 17 09:34:09 1995 Theodore Y. Ts'o (tytso@rt-11) - - * serial.c (rs_interrupt_single, rs_interrupt, rs_interrupt_multi): - Change the number of passes made from 64 to be 256, - configurable with the #define RS_ISR_PASS_LIMIT. - - * serial.c (rs_init, set_serial_info, get_serial_info, rs_close): - Remove support for closing_wait2. Instead, set - tty->closing and rely on the line discipline to prevent - echo wars. - - * n_tty.c (n_tty_receive_char): IEXTEN does not need to be - enabled in order for IXANY to be active. - - If tty->closing is set, then only process XON and XOFF - characters. - -Sun Feb 12 23:57:48 1995 Theodore Y. Ts'o (tytso@rt-11) - - * serial.c (rs_timer): Change the interrupt poll time from 60 - seconds to 10 seconds, configurable with the #define - RS_STROBE_TIME. - - * serial.c (rs_interrupt_multi, startup, shutdown, rs_ioctl, - set_multiport_struct, get_multiport_struct): Add - provisions for a new type of interrupt service routine, - which better supports multiple serial ports on a single - IRQ. - -Sun Feb 5 19:35:11 1995 Theodore Y. Ts'o (tytso@rt-11) - - * tty_ioctl.c (n_tty_ioctl, set_termios, tty_wait_until_sent): - * serial.c (rs_ioctl, rs_close): - * cyclades.c (cy_ioctl, cy_close): - * n_tty.c (n_tty_close): Rename wait_until_sent to - tty_wait_until_sent, so that it's a better name to export - in ksyms.c. - -Sat Feb 4 23:36:20 1995 Theodore Y. Ts'o (tytso@rt-11) - - * serial.c (rs_close): Added missing check for closing_wait2 being - ASYNC_CLOSING_WAIT_NONE. - -Thu Jan 26 09:02:49 1995 Theodore Y. Ts'o (tytso@rt-11) - - * serial.c (rs_init, set_serial_info, get_serial_info, - rs_close): Support close_wait in the serial driver. - This is helpful for slow devices (like serial - plotters) so that their outputs don't get flushed upon - device close. This has to be configurable because - normally we don't want ports to be hung up for long - periods of time during a close when they are not - connected to a device, or the device is powered off. - - The default is to wait 30 seconds; in the case of a - very slow device, the close_wait timeout should be - lengthened. If it is set to 0, the kernel will wait - forever for all of the data to be transmitted. - -Thu Jan 17 01:17:20 1995 Theodore Y. Ts'o (tytso@rt-11) - - * serial.c (startup, change_speed, rs_init): Add support to detect - the StarTech 16650 chip. Treat it as a 16450 for now, - because of its FIFO bugs. - -Thu Jan 5 21:21:57 1995 <dahinds@users.sourceforge.net> - - * serial.c: (receive_char): Added counter to prevent infinite loop - when a PCMCIA serial device is ejected. - -Thu Dec 29 17:53:48 1994 <tytso@rsx-11.mit.edu> - - * tty_io.c (check_tty_count): New procedure which checks - tty->count to make sure that it matches with the number of - open file descriptors which point at the structure. If - the number doesn't match, it prints a warning message. - -Wed Dec 28 15:41:51 1994 <tytso@rsx-11.mit.edu> - - * tty_io.c (do_tty_hangup, disassociate_ctty): At hangup time, - save the tty's current foreground process group in the - session leader's task structure. When the session leader - terminates, send a SIGHUP, SIGCONT to that process group. - This is not required by POSIX, but it's not prohibited - either, and it appears to be the least intrusive way - to fix a problem that dialup servers have with - orphaned process groups caused by modem hangups. - -Thu Dec 8 14:52:11 1994 <tytso@rsx-11.mit.edu> - - * serial.c (rs_ioctl): Don't allow most ioctl's if the serial port - isn't initialized. - - * serial.c (rs_close): Don't clear the IER if the serial port - isn't initialized. - - * serial.c (block_til_ready): Don't try to block on the dialin - port if the serial port isn't initialized. - -Wed Dec 7 10:48:30 1994 Si Park (si@wimpol.demon.co.uk) - * tty_io.c (tty_register_driver): Fix bug when linking onto - the tty_drivers list. We now test that there are elements - already on the list before setting the back link from the - first element to the new driver. - - * tty_io.c (tty_unregister_driver): Fix bug in unlinking the - specified driver from the tty_drivers list. We were not - setting the back link correctly. This used to result in - a dangling back link pointer and cause panics on the next - call to get_tty_driver(). - -Tue Nov 29 10:21:09 1994 Theodore Y. Ts'o (tytso@rt-11) - - * tty_io.c (tty_unregister_driver): Fix bug in - tty_unregister_driver where the pointer to the refcount is - tested, instead of the refcount itself. This caused - tty_unregister_driver to always return EBUSY. - -Sat Nov 26 11:59:24 1994 Theodore Y. Ts'o (tytso@rt-11) - - * tty_io.c (tty_ioctl): Add support for the new ioctl - TIOCTTYGSTRUCT, which allow a kernel debugging program - direct read access to the tty and tty_driver structures. - -Fri Nov 25 17:26:22 1994 Theodore Y. Ts'o (tytso@rt-11) - - * serial.c (rs_set_termios): Don't wake up processes blocked in - open when the CLOCAL flag changes, since a blocking - open only samples the CLOCAL flag once when it blocks, - and doesn't check it again. (n.b. FreeBSD has a - different behavior for blocking opens; it's not clear - whether Linux or FreeBSD's interpretation is correct. - POSIX doesn't give clear guidance on this issue, so - this may change in the future....) - - * serial.c (block_til_ready): Use the correct termios structure to - check the CLOCAL flag. If the cuaXX device is active, - then check the saved termios for the ttySXX device. - Otherwise, use the currently active termios structure. - -Sun Nov 6 21:05:44 1994 Theodore Y. Ts'o (tytso@rt-11) - - * serial.c (change_speed): Add support for direct access of - 57,600 and 115,200 bps. - -Wed Nov 2 10:32:36 1994 Theodore Y. Ts'o (tytso@rt-11) - - * n_tty.c (n_tty_receive_room): Only allow excess characters - through if we are in ICANON mode *and* there are other no - pending lines in the buffer. Otherwise cut and paste over - 4k breaks. - -Sat Oct 29 18:17:34 1994 Theodore Y. Ts'o (tytso@rt-11) - - * serial.c (rs_ioctl, get_lsr_info): Added patch suggested by Arne - Riiber so that user mode programs can tell when the - transmitter shift register is empty. - -Thu Oct 27 23:14:29 1994 Theodore Y. Ts'o (tytso@rt-11) - - * tty_ioctl.c (wait_until_sent): Added debugging printk statements - (under the #ifdef TTY_DEBUG_WAIT_UNTIL_SENT) - - * serial.c (rs_interrupt, rs_interrupt_single, receive_chars, - change_speed, rs_close): rs_close now disables receiver - interrupts when closing the serial port. This allows the - serial port to close quickly when Linux and a modem (or a - mouse) are engaged in an echo war; when closing the serial - port, we now first stop listening to incoming characters, - and *then* wait for the transmit buffer to drain. - - In order to make this change, the info->read_status_mask - is now used to control what bits of the line status - register are looked at in the interrupt routine in all - cases; previously it was only used in receive_chars to - select a few of the status bits. - -Mon Oct 24 23:36:21 1994 Theodore Y. Ts'o (tytso@rt-11) - - * serial.c (rs_close): Add a timeout to the transmitter flush - loop; this is just a sanity check in case we have flaky - (or non-existent-but-configured-by-the-user) hardware. - -Fri Oct 21 09:37:23 1994 Theodore Y. Ts'o (tytso@rt-11) - - * tty_io.c (tty_fasync): When asynchronous I/O is enabled, if the - process or process group has not be specified yet, set it - to be the tty's process group, or if that is not yet set, - to the current process's pid. - -Thu Oct 20 23:17:28 1994 Theodore Y. Ts'o (tytso@rt-11) - - * n_tty.c (n_tty_receive_room): If we are doing input - canonicalization, let as many characters through as - possible, so that the excess characters can be "beeped". - -Tue Oct 18 10:02:43 1994 Theodore Y. Ts'o (tytso@rt-11) - - * serial.c (rs_start): Removed an incorrect '!' that was - preventing transmit interrupts from being re-enabled in - rs_start(). Fortunately in most cases it would be - re-enabled elsewhere, but this still should be fixed - correctly. - -Sun Oct 9 23:46:03 1994 Theodore Y. Ts'o (tytso@rt-11) - - * tty_io.c (do_tty_hangup): If the tty driver flags - TTY_DRIVER_RESET_TERMIOS is set, then reset the termios - settings back to the driver's initial configuration. This - allows the termios settings to be reset even if a process - has hung up file descriptors keeping a pty's termios from - being freed and reset. - - * tty_io.c (release_dev): Fix memory leak. The pty's other - termios structure should also be freed. - - * serial.c (rs_close, shutdown): Change how we wait for the - transmitter to completely drain before shutting down the - serial port. We now do it by scheduling in another - process instead of busy looping with the interrupts turned - on. This may eliminate some race condition problems that - some people seem to be reporting. - -Sun Sep 25 14:18:14 1994 Theodore Y. Ts'o (tytso@rt-11) - - * tty_io.c (release_dev): When freeing a tty make sure that both - the tty and the o_tty (if present) aren't a process's - controlling tty. (Previously, we only checked the tty.) - - * serial.c (change_speed): Only enable the Modem Status - Interrupt for a port if CLOCAL is not set or CRTSCTS - is set. If we're not checking the carrier detect and - CTS line, there's no point in enabling the modem - status interrupt. This will save spurious interrupts - from slowing down systems who have terminals that - don't support either line. (Of course, if you want - only one of CD and CTS support, you will need a - properly wired serial cable.) - -Thu Sep 22 08:32:48 1994 Theodore Y. Ts'o (tytso@rt-11) - - * tty_io.c (do_SAK): Return if tty is null. - - * tty_io.c (_tty_name): Return "NULL tty" if the passed in tty is - NULL. - -Sat Sep 17 13:19:25 1994 Theodore Y. Ts'o (tytso@rt-11) - - * tty_ioctl.c (n_tty_ioctl): Fix TIOCGLCKTRMIOS and - TIOCSLCKTRMIOS, which were totally broken. Remove - extra indirection from argument; it should be a struct - termios *, not a struct termios **. - &real_tty->termios_locked should have been - real_tty->termios_locked. This caused us to be - reading and writing the termios_locked structure to - random places in kernel memory. - - * tty_io.c (release_dev): Oops! Forgot to delete a critical kfree - of the locked_termios. This leaves the locked_termios - structure pointed at a freed object. - -Fri Sep 16 08:13:25 1994 Theodore Y. Ts'o (tytso@rt-11) - - * tty_io.c (tty_open): Don't check for an exclusive open until - after the device specific open routine has been called. - Otherwise, the serial device ref counting will be screwed - up. - - * serial.c (rs_open, block_til_ready): Don't set termios structure - until after block_til_ready has returned successfully. - Modify block_til_ready to check the normal_termios - structure directly, so it doesn't rely on termios being - set before it's called. - -Thu Sep 15 23:34:01 1994 Theodore Y. Ts'o (tytso@rt-11) - - * serial.c (rs_close): Turn off interrupts during rs_close() to - prevent a race condition with the hangup code (which - runs during a software interrupt). - - * tty_io.c (release_dev): Don't free the locked_termios structure; - its state must be retained across device opens. - - - * tty_io.c (tty_unregister_driver): Added function to unregister a - tty driver. (For loadable device drivers.) - - diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index 919a28558d36..a3e10dc7cc25 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -298,7 +298,7 @@ static void intel_agp_insert_sg_entries(struct agp_memory *mem, j++; } } else { - /* sg may merge pages, but we have to seperate + /* sg may merge pages, but we have to separate * per-page addr for GTT */ unsigned int len, m; diff --git a/drivers/char/applicom.c b/drivers/char/applicom.c index fe2cb2f5db17..a7424bf7eacf 100644 --- a/drivers/char/applicom.c +++ b/drivers/char/applicom.c @@ -14,7 +14,7 @@ /* et passe en argument a acinit, mais est scrute sur le bus pour s'adapter */ /* au nombre de cartes presentes sur le bus. IOCL code 6 affichait V2.4.3 */ /* F.LAFORSE 28/11/95 creation de fichiers acXX.o avec les differentes */ -/* adresses de base des cartes, IOCTL 6 plus complet */ +/* addresses de base des cartes, IOCTL 6 plus complet */ /* J.PAGET le 19/08/96 copie de la version V2.6 en V2.8.0 sans modification */ /* de code autre que le texte V2.6.1 en V2.8.0 */ /*****************************************************************************/ diff --git a/drivers/char/hvc_iseries.c b/drivers/char/hvc_iseries.c index fd0242676a2a..21c54955084e 100644 --- a/drivers/char/hvc_iseries.c +++ b/drivers/char/hvc_iseries.c @@ -353,7 +353,7 @@ static void hvc_close_event(struct HvLpEvent *event) if (!hvlpevent_is_int(event)) { printk(KERN_WARNING - "hvc: got unexpected close acknowlegement\n"); + "hvc: got unexpected close acknowledgement\n"); return; } diff --git a/drivers/char/hw_random/n2-drv.c b/drivers/char/hw_random/n2-drv.c index 9b3e09cd41f9..10f868eefaa6 100644 --- a/drivers/char/hw_random/n2-drv.c +++ b/drivers/char/hw_random/n2-drv.c @@ -71,7 +71,7 @@ MODULE_VERSION(DRV_MODULE_VERSION); * x22 + x21 + x17 + x15 + x13 + x12 + x11 + x7 + x5 + x + 1 * * The RNG_CTL_VCO value of each noise cell must be programmed - * seperately. This is why 4 control register values must be provided + * separately. This is why 4 control register values must be provided * to the hypervisor. During a write, the hypervisor writes them all, * one at a time, to the actual RNG_CTL register. The first three * values are used to setup the desired RNG_CTL_VCO for each entropy diff --git a/drivers/char/ip2/i2hw.h b/drivers/char/ip2/i2hw.h index 8aa6e7ab8d5b..c0ba6c05f0cd 100644 --- a/drivers/char/ip2/i2hw.h +++ b/drivers/char/ip2/i2hw.h @@ -559,7 +559,7 @@ Loadware may be sent to the board in two ways: 2) It may be hard-coded into your source by including a .h file (typically supplied by Computone), which declares a data array and initializes every - element. This acheives the same result as if an entire loadware file had + element. This achieves the same result as if an entire loadware file had been read into the array. This requires more data space in your program, but access to the file system diff --git a/drivers/char/pty.c b/drivers/char/pty.c index 385c44b3034f..5ee424817263 100644 --- a/drivers/char/pty.c +++ b/drivers/char/pty.c @@ -220,7 +220,7 @@ static void pty_set_termios(struct tty_struct *tty, * @tty: tty being resized * @ws: window size being set. * - * Update the termios variables and send the neccessary signals to + * Update the termios variables and send the necessary signals to * peform a terminal resize correctly */ diff --git a/drivers/char/random.c b/drivers/char/random.c index 2849713d2231..2fd3d39995d5 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -1191,7 +1191,7 @@ const struct file_operations urandom_fops = { void generate_random_uuid(unsigned char uuid_out[16]) { get_random_bytes(uuid_out, 16); - /* Set UUID version to 4 --- truely random generation */ + /* Set UUID version to 4 --- truly random generation */ uuid_out[6] = (uuid_out[6] & 0x0F) | 0x40; /* Set the UUID variant to DCE */ uuid_out[8] = (uuid_out[8] & 0x3F) | 0x80; diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c index 986aa606a6b6..1ec3d5cd748f 100644 --- a/drivers/char/serial167.c +++ b/drivers/char/serial167.c @@ -1989,7 +1989,7 @@ void mvme167_serial_console_setup(int cflag) /* * Attempt to set up all channels to something reasonable, and * bang out a INIT_CHAN command. We should then be able to limit - * the ammount of fiddling we have to do in normal running. + * the amount of fiddling we have to do in normal running. */ for (ch = 3; ch >= 0; ch--) { diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index dcb9083ecde0..a42c466f7092 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -2028,7 +2028,7 @@ static int tiocgwinsz(struct tty_struct *tty, struct winsize __user *arg) * @rows: rows (character) * @cols: cols (character) * - * Update the termios variables and send the neccessary signals to + * Update the termios variables and send the necessary signals to * peform a terminal resize correctly */ diff --git a/drivers/char/vt.c b/drivers/char/vt.c index 50faa1fb0f06..bd1d1164fec5 100644 --- a/drivers/char/vt.c +++ b/drivers/char/vt.c @@ -821,7 +821,7 @@ static inline int resize_screen(struct vc_data *vc, int width, int height, * * Resize a virtual console, clipping according to the actual constraints. * If the caller passes a tty structure then update the termios winsize - * information and perform any neccessary signal handling. + * information and perform any necessary signal handling. * * Caller must hold the console semaphore. Takes the termios mutex and * ctrl_lock of the tty IFF a tty is passed. @@ -2119,8 +2119,6 @@ static int do_con_write(struct tty_struct *tty, const unsigned char *buf, int co uint8_t inverse; uint8_t width; u16 himask, charmask; - const unsigned char *orig_buf = NULL; - int orig_count; if (in_interrupt()) return count; @@ -2142,8 +2140,6 @@ static int do_con_write(struct tty_struct *tty, const unsigned char *buf, int co release_console_sem(); return 0; } - orig_buf = buf; - orig_count = count; himask = vc->vc_hi_font_mask; charmask = himask ? 0x1ff : 0xff; diff --git a/drivers/crypto/hifn_795x.c b/drivers/crypto/hifn_795x.c index 09ad9154d86c..73e8b1713b54 100644 --- a/drivers/crypto/hifn_795x.c +++ b/drivers/crypto/hifn_795x.c @@ -321,7 +321,7 @@ static atomic_t hifn_dev_number; #define HIFN_PUBOPLEN_MOD_M 0x0000007f /* modulus length mask */ #define HIFN_PUBOPLEN_MOD_S 0 /* modulus length shift */ #define HIFN_PUBOPLEN_EXP_M 0x0003ff80 /* exponent length mask */ -#define HIFN_PUBOPLEN_EXP_S 7 /* exponent lenght shift */ +#define HIFN_PUBOPLEN_EXP_S 7 /* exponent length shift */ #define HIFN_PUBOPLEN_RED_M 0x003c0000 /* reducend length mask */ #define HIFN_PUBOPLEN_RED_S 18 /* reducend length shift */ diff --git a/drivers/dma/coh901318_lli.h b/drivers/dma/coh901318_lli.h index 7bf713b79c6b..7a5c80990e9e 100644 --- a/drivers/dma/coh901318_lli.h +++ b/drivers/dma/coh901318_lli.h @@ -30,7 +30,7 @@ struct device; * @pool: pool handle * @dev: dma device * @lli_nbr: number of lli:s in the pool - * @algin: adress alignemtn of lli:s + * @algin: address alignemtn of lli:s * returns 0 on success otherwise none zero */ int coh901318_pool_create(struct coh901318_pool *pool, diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.c b/drivers/gpu/drm/nouveau/nouveau_bios.c index 71247da17da5..75bceee76044 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bios.c +++ b/drivers/gpu/drm/nouveau/nouveau_bios.c @@ -3545,7 +3545,7 @@ int nouveau_bios_parse_lvds_table(struct drm_device *dev, int pxclk, bool *dl, b * at which modes should be set up in the dual link style. * * Following the header, the BMP (ver 0xa) table has several records, - * indexed by a seperate xlat table, indexed in turn by the fp strap in + * indexed by a separate xlat table, indexed in turn by the fp strap in * EXTDEV_BOOT. Each record had a config byte, followed by 6 script * numbers for use by INIT_SUB which controlled panel init and power, * and finally a dword of ms to sleep between power off and on diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h index 5f8d987af363..4b9aaf2a8d0f 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drv.h +++ b/drivers/gpu/drm/nouveau/nouveau_drv.h @@ -553,7 +553,7 @@ struct drm_nouveau_private { uint32_t ramro_offset; uint32_t ramro_size; - /* base physical adresses */ + /* base physical addresses */ uint64_t fb_phys; uint64_t fb_available_size; uint64_t fb_mappable_pages; diff --git a/drivers/gpu/drm/radeon/radeon_state.c b/drivers/gpu/drm/radeon/radeon_state.c index 3c32f840dcd2..40ab6d9c3736 100644 --- a/drivers/gpu/drm/radeon/radeon_state.c +++ b/drivers/gpu/drm/radeon/radeon_state.c @@ -1093,7 +1093,7 @@ static void radeon_cp_dispatch_clear(struct drm_device * dev, /* judging by the first tile offset needed, could possibly directly address/clear 4x4 tiles instead of 8x2 * 4x4 macro tiles, though would still need clear mask for - right/bottom if truely 4x4 granularity is desired ? */ + right/bottom if truly 4x4 granularity is desired ? */ OUT_RING(tileoffset * 16); /* the number of tiles to clear */ OUT_RING(nrtilesx + 1); diff --git a/drivers/gpu/drm/via/via_irq.c b/drivers/gpu/drm/via/via_irq.c index 5935b8842e86..34079f251cd4 100644 --- a/drivers/gpu/drm/via/via_irq.c +++ b/drivers/gpu/drm/via/via_irq.c @@ -150,7 +150,7 @@ irqreturn_t via_driver_irq_handler(DRM_IRQ_ARGS) cur_irq++; } - /* Acknowlege interrupts */ + /* Acknowledge interrupts */ VIA_WRITE(VIA_REG_INTERRUPT, status); @@ -165,7 +165,7 @@ static __inline__ void viadrv_acknowledge_irqs(drm_via_private_t * dev_priv) u32 status; if (dev_priv) { - /* Acknowlege interrupts */ + /* Acknowledge interrupts */ status = VIA_READ(VIA_REG_INTERRUPT); VIA_WRITE(VIA_REG_INTERRUPT, status | dev_priv->irq_pending_mask); diff --git a/drivers/i2c/algos/i2c-algo-pcf.c b/drivers/i2c/algos/i2c-algo-pcf.c index 7ce75775ec73..6b6bd06202b2 100644 --- a/drivers/i2c/algos/i2c-algo-pcf.c +++ b/drivers/i2c/algos/i2c-algo-pcf.c @@ -176,7 +176,7 @@ static int pcf_init_8584 (struct i2c_algo_pcf_data *adap) */ if (((temp = get_pcf(adap, 1)) & 0x7f) != (0)) { DEB2(printk(KERN_ERR "i2c-algo-pcf.o: PCF detection failed -- can't select S0 (0x%02x).\n", temp)); - return -ENXIO; /* definetly not PCF8584 */ + return -ENXIO; /* definitely not PCF8584 */ } /* load own address in S0, effective address is (own << 1) */ diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index 7647a20523a0..90ffbf6f9d4f 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -12,7 +12,7 @@ * * History: * Apr 2002: Initial version [CS] - * Jun 2002: Properly seperated algo/adap [FB] + * Jun 2002: Properly separated algo/adap [FB] * Jan 2003: Fixed several bugs concerning interrupt handling [Kai-Uwe Bloem] * Jan 2003: added limited signal handling [Kai-Uwe Bloem] * Sep 2004: Major rework to ensure efficient bus handling [RMK] diff --git a/drivers/ieee1394/pcilynx.c b/drivers/ieee1394/pcilynx.c index 9555fd253865..bf47fee79808 100644 --- a/drivers/ieee1394/pcilynx.c +++ b/drivers/ieee1394/pcilynx.c @@ -1452,7 +1452,7 @@ static int __devinit add_card(struct pci_dev *dev, PRINT(KERN_ERR, lynx->id, "unable to read bus info block from i2c"); } else { PRINT(KERN_INFO, lynx->id, "got bus info block from serial eeprom"); - /* FIXME: probably we shoud rewrite the max_rec, max_ROM(1394a), + /* FIXME: probably we should rewrite the max_rec, max_ROM(1394a), * generation(1394a) and link_spd(1394a) field and recalculate * the CRC */ diff --git a/drivers/infiniband/hw/ehca/ehca_qes.h b/drivers/infiniband/hw/ehca/ehca_qes.h index 5d28e3e98a20..90c4efa67586 100644 --- a/drivers/infiniband/hw/ehca/ehca_qes.h +++ b/drivers/infiniband/hw/ehca/ehca_qes.h @@ -46,7 +46,7 @@ #include "ehca_tools.h" -/* virtual scatter gather entry to specify remote adresses with length */ +/* virtual scatter gather entry to specify remote addresses with length */ struct ehca_vsgentry { u64 vaddr; u32 lkey; @@ -148,7 +148,7 @@ struct ehca_wqe { u32 immediate_data; union { struct { - u64 remote_virtual_adress; + u64 remote_virtual_address; u32 rkey; u32 reserved; u64 atomic_1st_op_dma_len; diff --git a/drivers/infiniband/hw/ehca/ehca_reqs.c b/drivers/infiniband/hw/ehca/ehca_reqs.c index e3ec7fdd67bd..9a3fbfca9b41 100644 --- a/drivers/infiniband/hw/ehca/ehca_reqs.c +++ b/drivers/infiniband/hw/ehca/ehca_reqs.c @@ -269,7 +269,7 @@ static inline int ehca_write_swqe(struct ehca_qp *qp, /* no break is intentional here */ case IB_QPT_RC: /* TODO: atomic not implemented */ - wqe_p->u.nud.remote_virtual_adress = + wqe_p->u.nud.remote_virtual_address = send_wr->wr.rdma.remote_addr; wqe_p->u.nud.rkey = send_wr->wr.rdma.rkey; diff --git a/drivers/input/misc/yealink.h b/drivers/input/misc/yealink.h index 48af0be9cbdf..1e0f52397010 100644 --- a/drivers/input/misc/yealink.h +++ b/drivers/input/misc/yealink.h @@ -127,7 +127,7 @@ struct yld_ctl_packet { * yld_status struct. */ -/* LCD, each segment must be driven seperately. +/* LCD, each segment must be driven separately. * * Layout: * diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c index b54aee7cd9e3..ff4d77c4de11 100644 --- a/drivers/input/serio/i8042.c +++ b/drivers/input/serio/i8042.c @@ -430,7 +430,7 @@ static bool i8042_filter(unsigned char data, unsigned char str, } if (i8042_platform_filter && i8042_platform_filter(data, str, serio)) { - dbg("Filtered out by platfrom filter\n"); + dbg("Filtered out by platform filter\n"); return true; } diff --git a/drivers/input/tablet/aiptek.c b/drivers/input/tablet/aiptek.c index 7d005a3616d7..4be039d7dcad 100644 --- a/drivers/input/tablet/aiptek.c +++ b/drivers/input/tablet/aiptek.c @@ -362,7 +362,7 @@ static const int macroKeyEvents[] = { }; /*********************************************************************** - * Map values to strings and back. Every map shoudl have the following + * Map values to strings and back. Every map should have the following * as its last element: { NULL, AIPTEK_INVALID_VALUE }. */ #define AIPTEK_INVALID_VALUE -1 diff --git a/drivers/isdn/hardware/mISDN/mISDNisar.c b/drivers/isdn/hardware/mISDN/mISDNisar.c index 09095c747110..f0bc6fa95809 100644 --- a/drivers/isdn/hardware/mISDN/mISDNisar.c +++ b/drivers/isdn/hardware/mISDN/mISDNisar.c @@ -1712,13 +1712,13 @@ mISDNisar_init(struct isar_hw *isar, void *hw) } EXPORT_SYMBOL(mISDNisar_init); -static int isar_mod_init(void) +static int __init isar_mod_init(void) { pr_notice("mISDN: ISAR driver Rev. %s\n", ISAR_REV); return 0; } -static void isar_mod_cleanup(void) +static void __exit isar_mod_cleanup(void) { pr_notice("mISDN: ISAR module unloaded\n"); } diff --git a/drivers/isdn/i4l/isdn_common.c b/drivers/isdn/i4l/isdn_common.c index adb1e8c36b46..00c60e2e0ff7 100644 --- a/drivers/isdn/i4l/isdn_common.c +++ b/drivers/isdn/i4l/isdn_common.c @@ -1347,7 +1347,7 @@ isdn_ioctl(struct inode *inode, struct file *file, uint cmd, ulong arg) /* * isdn net devices manage lots of configuration variables as linked lists. * Those lists must only be manipulated from user space. Some of the ioctl's - * service routines access user space and are not atomic. Therefor, ioctl's + * service routines access user space and are not atomic. Therefore, ioctl's * manipulating the lists and ioctl's sleeping while accessing the lists * are serialized by means of a semaphore. */ diff --git a/drivers/isdn/mISDN/dsp_core.c b/drivers/isdn/mISDN/dsp_core.c index 43ff4d3b046e..6eac588e0a37 100644 --- a/drivers/isdn/mISDN/dsp_core.c +++ b/drivers/isdn/mISDN/dsp_core.c @@ -1114,7 +1114,7 @@ static struct Bprotocol DSP = { .create = dspcreate }; -static int dsp_init(void) +static int __init dsp_init(void) { int err; int tics; @@ -1212,7 +1212,7 @@ static int dsp_init(void) } -static void dsp_cleanup(void) +static void __exit dsp_cleanup(void) { mISDN_unregister_Bprotocol(&DSP); diff --git a/drivers/isdn/mISDN/l1oip_core.c b/drivers/isdn/mISDN/l1oip_core.c index f1e8af54dff0..325b1ad7d4b8 100644 --- a/drivers/isdn/mISDN/l1oip_core.c +++ b/drivers/isdn/mISDN/l1oip_core.c @@ -477,7 +477,7 @@ l1oip_socket_parse(struct l1oip *hc, struct sockaddr_in *sin, u8 *buf, int len) printk(KERN_DEBUG "%s: received frame, parsing... (%d)\n", __func__, len); - /* check lenght */ + /* check length */ if (len < 1+1+2) { printk(KERN_WARNING "%s: packet error - length %d below " "4 bytes\n", __func__, len); @@ -1509,7 +1509,7 @@ l1oip_init(void) printk(KERN_DEBUG "%s: interface %d is %s with %s.\n", __func__, l1oip_cnt, pri ? "PRI" : "BRI", bundle ? "bundled IP packet for all B-channels" : - "seperate IP packets for every B-channel"); + "separate IP packets for every B-channel"); hc = kzalloc(sizeof(struct l1oip), GFP_ATOMIC); if (!hc) { diff --git a/drivers/isdn/sc/hardware.h b/drivers/isdn/sc/hardware.h index 9e6d5302bf8e..627324856ead 100644 --- a/drivers/isdn/sc/hardware.h +++ b/drivers/isdn/sc/hardware.h @@ -87,7 +87,7 @@ #define BRI_CHANNELS 2 /* Number of B channels */ #define BRI_BASEPG_VAL 0x98 #define BRI_MAGIC 0x60000 /* Magic Number */ -#define BRI_MEMSIZE 0x10000 /* Ammount of RAM (64K) */ +#define BRI_MEMSIZE 0x10000 /* Amount of RAM (64K) */ #define BRI_PARTNO "72-029" #define BRI_FEATURES ISDN_FEATURE_L2_HDLC | ISDN_FEATURE_L3_TRANS; /* diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.h b/drivers/media/dvb/dvb-core/dvb_frontend.h index 52e4ce4304ee..80dda308ff74 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.h +++ b/drivers/media/dvb/dvb-core/dvb_frontend.h @@ -214,14 +214,14 @@ struct dvb_tuner_ops { int (*get_status)(struct dvb_frontend *fe, u32 *status); int (*get_rf_strength)(struct dvb_frontend *fe, u16 *strength); - /** These are provided seperately from set_params in order to facilitate silicon - * tuners which require sophisticated tuning loops, controlling each parameter seperately. */ + /** These are provided separately from set_params in order to facilitate silicon + * tuners which require sophisticated tuning loops, controlling each parameter separately. */ int (*set_frequency)(struct dvb_frontend *fe, u32 frequency); int (*set_bandwidth)(struct dvb_frontend *fe, u32 bandwidth); /* - * These are provided seperately from set_params in order to facilitate silicon - * tuners which require sophisticated tuning loops, controlling each parameter seperately. + * These are provided separately from set_params in order to facilitate silicon + * tuners which require sophisticated tuning loops, controlling each parameter separately. */ int (*set_state)(struct dvb_frontend *fe, enum tuner_param param, struct tuner_state *state); int (*get_state)(struct dvb_frontend *fe, enum tuner_param param, struct tuner_state *state); diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c index 12279f6d9bc4..716870ae85d5 100644 --- a/drivers/media/video/bt8xx/bttv-cards.c +++ b/drivers/media/video/bt8xx/bttv-cards.c @@ -4404,7 +4404,7 @@ static void rv605_muxsel(struct bttv *btv, unsigned int input) /* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning] * * The CS16 (available on eBay cheap) is a PCI board with four Fusion - * 878A chips, a PCI bridge, an Atmel microcontroller, four sync seperator + * 878A chips, a PCI bridge, an Atmel microcontroller, four sync separator * chips, ten eight input analog multiplexors, a not chip and a few * other components. * @@ -4426,7 +4426,7 @@ static void rv605_muxsel(struct bttv *btv, unsigned int input) * * There is an ATMEL microcontroller with an 8031 core on board. I have not * determined what function (if any) it provides. With the microcontroller - * and sync seperator chips a guess is that it might have to do with video + * and sync separator chips a guess is that it might have to do with video * switching and maybe some digital I/O. */ static void tibetCS16_muxsel(struct bttv *btv, unsigned int input) diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c index bc4ced6c013b..f36e11a0458d 100644 --- a/drivers/media/video/gspca/ov519.c +++ b/drivers/media/video/gspca/ov519.c @@ -512,7 +512,7 @@ static const struct v4l2_pix_format ovfx2_ov3610_mode[] = { /* * The FX2 chip does not give us a zero length read at end of frame. * It does, however, give a short read at the end of a frame, if - * neccessary, rather than run two frames together. + * necessary, rather than run two frames together. * * By choosing the right bulk transfer size, we are guaranteed to always * get a short read for the last read of each frame. Frame sizes are diff --git a/drivers/media/video/pwc/philips.txt b/drivers/media/video/pwc/philips.txt index f9f3584281d8..d38dd791511e 100644 --- a/drivers/media/video/pwc/philips.txt +++ b/drivers/media/video/pwc/philips.txt @@ -33,7 +33,7 @@ a lot of extra information, a FAQ, and the binary plugin 'PWCX'. This plugin contains decompression routines that allow you to use higher image sizes and framerates; in addition the webcam uses less bandwidth on the USB bus (handy if you want to run more than 1 camera simultaneously). These routines fall -under a NDA, and may therefor not be distributed as source; however, its use +under a NDA, and may therefore not be distributed as source; however, its use is completely optional. You can build this code either into your kernel, or as a module. I recommend diff --git a/drivers/media/video/sn9c102/sn9c102_sensor.h b/drivers/media/video/sn9c102/sn9c102_sensor.h index 4af7382da5c5..494957b10bac 100644 --- a/drivers/media/video/sn9c102/sn9c102_sensor.h +++ b/drivers/media/video/sn9c102/sn9c102_sensor.h @@ -120,7 +120,7 @@ extern int sn9c102_write_regs(struct sn9c102_device*, const u8 valreg[][2], /* Write multiple registers with constant values. For example: sn9c102_write_const_regs(cam, {0x00, 0x14}, {0x60, 0x17}, {0x0f, 0x18}); - Register adresses must be < 256. + Register addresses must be < 256. */ #define sn9c102_write_const_regs(sn9c102_device, data...) \ ({ static const u8 _valreg[][2] = {data}; \ diff --git a/drivers/media/video/tea6420.c b/drivers/media/video/tea6420.c index 0446524d3543..6bf6bc7dbc7f 100644 --- a/drivers/media/video/tea6420.c +++ b/drivers/media/video/tea6420.c @@ -6,7 +6,7 @@ The tea6420 is a bus controlled audio-matrix with 5 stereo inputs, 4 stereo outputs and gain control for each output. - It is cascadable, i.e. it can be found at the adresses 0x98 + It is cascadable, i.e. it can be found at the addresses 0x98 and 0x9a on the i2c-bus. For detailed informations download the specifications directly diff --git a/drivers/message/i2o/iop.c b/drivers/message/i2o/iop.c index e5ab62141503..ef5ce2676f05 100644 --- a/drivers/message/i2o/iop.c +++ b/drivers/message/i2o/iop.c @@ -539,7 +539,7 @@ static int i2o_iop_reset(struct i2o_controller *c) * which is indeterminate. We need to wait until the IOP has * rebooted before we can let the system talk to it. We read * the inbound Free_List until a message is available. If we - * can't read one in the given ammount of time, we assume the + * can't read one in the given amount of time, we assume the * IOP could not reboot properly. */ osm_debug("%s: Reset in progress, waiting for reboot...\n", diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c index dc9ea95c0561..ff0718efb0ae 100644 --- a/drivers/mfd/sm501.c +++ b/drivers/mfd/sm501.c @@ -523,7 +523,7 @@ unsigned long sm501_set_clock(struct device *dev, unsigned long clock = readl(sm->regs + SM501_CURRENT_CLOCK); unsigned char reg; unsigned int pll_reg = 0; - unsigned long sm501_freq; /* the actual frequency acheived */ + unsigned long sm501_freq; /* the actual frequency achieved */ struct sm501_clock to; @@ -533,7 +533,7 @@ unsigned long sm501_set_clock(struct device *dev, switch (clksrc) { case SM501_CLOCK_P2XCLK: - /* This clock is divided in half so to achive the + /* This clock is divided in half so to achieve the * requested frequency the value must be multiplied by * 2. This clock also has an additional pre divisor */ @@ -562,7 +562,7 @@ unsigned long sm501_set_clock(struct device *dev, break; case SM501_CLOCK_V2XCLK: - /* This clock is divided in half so to achive the + /* This clock is divided in half so to achieve the * requested frequency the value must be multiplied by 2. */ sm501_freq = (sm501_select_clock(2 * req_freq, &to, 3) / 2); @@ -648,7 +648,7 @@ unsigned long sm501_find_clock(struct device *dev, unsigned long req_freq) { struct sm501_devdata *sm = dev_get_drvdata(dev); - unsigned long sm501_freq; /* the frequency achiveable by the 501 */ + unsigned long sm501_freq; /* the frequency achieveable by the 501 */ struct sm501_clock to; switch (clksrc) { diff --git a/drivers/mmc/card/sdio_uart.c b/drivers/mmc/card/sdio_uart.c index 3fab78ba8952..723e50894db9 100644 --- a/drivers/mmc/card/sdio_uart.c +++ b/drivers/mmc/card/sdio_uart.c @@ -575,7 +575,7 @@ static int uart_carrier_raised(struct tty_port *tport) struct sdio_uart_port *port = container_of(tport, struct sdio_uart_port, port); unsigned int ret = sdio_uart_claim_func(port); - if (ret) /* Missing hardware shoudn't block for carrier */ + if (ret) /* Missing hardware shouldn't block for carrier */ return 1; ret = sdio_uart_get_mctrl(port); sdio_uart_release_func(port); diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c index 60a2b69e54f5..16cc91c827c9 100644 --- a/drivers/mmc/host/mxcmmc.c +++ b/drivers/mmc/host/mxcmmc.c @@ -4,7 +4,7 @@ * This is a driver for the SDHC controller found in Freescale MX2/MX3 * SoCs. It is basically the same hardware as found on MX1 (imxmmc.c). * Unlike the hardware found on MX1, this hardware just works and does - * not need all the quirks found in imxmmc.c, hence the seperate driver. + * not need all the quirks found in imxmmc.c, hence the separate driver. * * Copyright (C) 2008 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de> * Copyright (C) 2006 Pavel Pisa, PiKRON <ppisa@pikron.com> diff --git a/drivers/mtd/chips/cfi_util.c b/drivers/mtd/chips/cfi_util.c index ca584d0380b4..ca584d0380b4 100755..100644 --- a/drivers/mtd/chips/cfi_util.c +++ b/drivers/mtd/chips/cfi_util.c diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c index 1bec5e1ce6ac..8db1148dfa47 100644 --- a/drivers/mtd/chips/jedec_probe.c +++ b/drivers/mtd/chips/jedec_probe.c @@ -226,7 +226,7 @@ struct unlock_addr { * exists, but is for MTD_UADDR_NOT_SUPPORTED - and, therefore, * should not be used. The problem is that structures with * initializers have extra fields initialized to 0. It is _very_ - * desireable to have the unlock address entries for unsupported + * desirable to have the unlock address entries for unsupported * data widths automatically initialized - that means that * MTD_UADDR_NOT_SUPPORTED must be 0 and the first entry here * must go unused. diff --git a/drivers/mtd/inftlcore.c b/drivers/mtd/inftlcore.c index 8aca5523a337..8aca5523a337 100755..100644 --- a/drivers/mtd/inftlcore.c +++ b/drivers/mtd/inftlcore.c diff --git a/drivers/mtd/maps/plat-ram.c b/drivers/mtd/maps/plat-ram.c index dafb91944e70..76a76be5a7bd 100644 --- a/drivers/mtd/maps/plat-ram.c +++ b/drivers/mtd/maps/plat-ram.c @@ -4,7 +4,7 @@ * http://www.simtec.co.uk/products/SWLINUX/ * Ben Dooks <ben@simtec.co.uk> * - * Generic platfrom device based RAM map + * Generic platform device based RAM map * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/mtd/nand/bcm_umi_nand.c b/drivers/mtd/nand/bcm_umi_nand.c index 087bcd745bb7..7d1cca7a31a9 100644 --- a/drivers/mtd/nand/bcm_umi_nand.c +++ b/drivers/mtd/nand/bcm_umi_nand.c @@ -381,7 +381,7 @@ static int __devinit bcm_umi_nand_probe(struct platform_device *pdev) if (!r) return -ENXIO; - /* map physical adress */ + /* map physical address */ bcm_umi_io_base = ioremap(r->start, r->end - r->start + 1); if (!bcm_umi_io_base) { @@ -525,7 +525,7 @@ static int bcm_umi_nand_remove(struct platform_device *pdev) /* Release resources, unregister device */ nand_release(board_mtd); - /* unmap physical adress */ + /* unmap physical address */ iounmap(bcm_umi_io_base); /* Free the MTD device structure */ diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index 45dec5770da0..b2900d8406d3 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -507,7 +507,7 @@ static void mxc_do_addr_cycle(struct mtd_info *mtd, int column, int page_addr) * MXC NANDFC can only perform full page+spare or * spare-only read/write. When the upper layers * layers perform a read/write buf operation, - * we will used the saved column adress to index into + * we will used the saved column address to index into * the full page. */ send_addr(host, 0, page_addr == -1); diff --git a/drivers/net/atlx/atl2.h b/drivers/net/atlx/atl2.h index d918bbe621ea..927e4de6474d 100644 --- a/drivers/net/atlx/atl2.h +++ b/drivers/net/atlx/atl2.h @@ -442,7 +442,7 @@ struct atl2_hw { struct atl2_ring_header { /* pointer to the descriptor ring memory */ void *desc; - /* physical adress of the descriptor ring */ + /* physical address of the descriptor ring */ dma_addr_t dma; /* length of descriptor ring in bytes */ unsigned int size; diff --git a/drivers/net/chelsio/sge.c b/drivers/net/chelsio/sge.c index 71384114a4ed..55d99ca82f8a 100644 --- a/drivers/net/chelsio/sge.c +++ b/drivers/net/chelsio/sge.c @@ -248,7 +248,7 @@ static void restart_sched(unsigned long); * * Interrupts are handled by a single CPU and it is likely that on a MP system * the application is migrated to another CPU. In that scenario, we try to - * seperate the RX(in irq context) and TX state in order to decrease memory + * separate the RX(in irq context) and TX state in order to decrease memory * contention. */ struct sge { diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c index 14624019ce71..b0208e474f7e 100644 --- a/drivers/net/cs89x0.c +++ b/drivers/net/cs89x0.c @@ -580,7 +580,7 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular) } #ifdef CONFIG_SH_HICOSH4 - /* truely reset the chip */ + /* truly reset the chip */ writeword(ioaddr, ADD_PORT, 0x0114); writeword(ioaddr, DATA_PORT, 0x0040); #endif diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c index 78e265b484b6..67e61b2a8c42 100644 --- a/drivers/net/cxgb3/sge.c +++ b/drivers/net/cxgb3/sge.c @@ -197,13 +197,13 @@ static inline void refill_rspq(struct adapter *adapter, /** * need_skb_unmap - does the platform need unmapping of sk_buffs? * - * Returns true if the platfrom needs sk_buff unmapping. The compiler + * Returns true if the platform needs sk_buff unmapping. The compiler * optimizes away unecessary code if this returns true. */ static inline int need_skb_unmap(void) { /* - * This structure is used to tell if the platfrom needs buffer + * This structure is used to tell if the platform needs buffer * unmapping by checking if DECLARE_PCI_UNMAP_ADDR defines anything. */ struct dummy { diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c index 1ac9440eb3fb..13f9869927e3 100644 --- a/drivers/net/davinci_emac.c +++ b/drivers/net/davinci_emac.c @@ -2658,7 +2658,7 @@ static int __devinit davinci_emac_probe(struct platform_device *pdev) pdata = pdev->dev.platform_data; if (!pdata) { - printk(KERN_ERR "DaVinci EMAC: No platfrom data\n"); + printk(KERN_ERR "DaVinci EMAC: No platform data\n"); return -ENODEV; } diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c index 3c95acb3a87d..712ccc66ba25 100644 --- a/drivers/net/e1000e/82571.c +++ b/drivers/net/e1000e/82571.c @@ -1346,7 +1346,7 @@ static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw) * * 1) down * 2) autoneg_progress - * 3) autoneg_complete (the link sucessfully autonegotiated) + * 3) autoneg_complete (the link successfully autonegotiated) * 4) forced_up (the link has been forced up, it did not autonegotiate) * **/ diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c index 2425ed11d5cc..a8b2c0de27c4 100644 --- a/drivers/net/e1000e/lib.c +++ b/drivers/net/e1000e/lib.c @@ -647,7 +647,7 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw) if (!(rxcw & E1000_RXCW_IV)) { mac->serdes_has_link = true; e_dbg("SERDES: Link up - autoneg " - "completed sucessfully.\n"); + "completed successfully.\n"); } else { mac->serdes_has_link = false; e_dbg("SERDES: Link down - invalid" diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index 583a21c1def3..0ed25f059a00 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -688,7 +688,7 @@ static void igb_set_interrupt_capability(struct igb_adapter *adapter) /* start with one vector for every rx queue */ numvecs = adapter->num_rx_queues; - /* if tx handler is seperate add 1 for every tx queue */ + /* if tx handler is separate add 1 for every tx queue */ if (!(adapter->flags & IGB_FLAG_QUEUE_PAIRS)) numvecs += adapter->num_tx_queues; diff --git a/drivers/net/irda/sa1100_ir.c b/drivers/net/irda/sa1100_ir.c index c412e8026173..1dcdce0631aa 100644 --- a/drivers/net/irda/sa1100_ir.c +++ b/drivers/net/irda/sa1100_ir.c @@ -331,7 +331,7 @@ static int sa1100_irda_resume(struct platform_device *pdev) * If we missed a speed change, initialise at the new speed * directly. It is debatable whether this is actually * required, but in the interests of continuing from where - * we left off it is desireable. The converse argument is + * we left off it is desirable. The converse argument is * that we should re-negotiate at 9600 baud again. */ if (si->newspeed) { diff --git a/drivers/net/ks8851.c b/drivers/net/ks8851.c index b5219cce12ed..0573e0bb4444 100644 --- a/drivers/net/ks8851.c +++ b/drivers/net/ks8851.c @@ -407,7 +407,7 @@ static irqreturn_t ks8851_irq(int irq, void *pw) * @buff: The buffer address * @len: The length of the data to read * - * Issue an RXQ FIFO read command and read the @len ammount of data from + * Issue an RXQ FIFO read command and read the @len amount of data from * the FIFO into the buffer specified by @buff. */ static void ks8851_rdfifo(struct ks8851_net *ks, u8 *buff, unsigned len) diff --git a/drivers/net/qlge/qlge_ethtool.c b/drivers/net/qlge/qlge_ethtool.c index 05b8bde9980d..7dbff87480dc 100644 --- a/drivers/net/qlge/qlge_ethtool.c +++ b/drivers/net/qlge/qlge_ethtool.c @@ -405,7 +405,7 @@ static int ql_set_wol(struct net_device *ndev, struct ethtool_wolinfo *wol) u32 wol = 0; status = ql_mb_wol_mode(qdev, wol); netif_err(qdev, drv, qdev->ndev, "WOL %s (wol code 0x%x)\n", - status == 0 ? "cleared sucessfully" : "clear failed", + status == 0 ? "cleared successfully" : "clear failed", wol); } diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c index c26ec5d740f6..fd34f266c0a8 100644 --- a/drivers/net/qlge/qlge_main.c +++ b/drivers/net/qlge/qlge_main.c @@ -3855,7 +3855,7 @@ int ql_wol(struct ql_adapter *qdev) status = ql_mb_wol_mode(qdev, wol); netif_err(qdev, drv, qdev->ndev, "WOL %s (wol code 0x%x) on %s\n", - (status == 0) ? "Sucessfully set" : "Failed", + (status == 0) ? "Successfully set" : "Failed", wol, qdev->ndev->name); } diff --git a/drivers/net/sfc/regs.h b/drivers/net/sfc/regs.h index 89d606fe9248..18a3be428348 100644 --- a/drivers/net/sfc/regs.h +++ b/drivers/net/sfc/regs.h @@ -95,7 +95,7 @@ #define FRF_AA_INT_ACK_KER_FIELD_LBN 0 #define FRF_AA_INT_ACK_KER_FIELD_WIDTH 32 -/* INT_ISR0_REG: Function 0 Interrupt Acknowlege Status register */ +/* INT_ISR0_REG: Function 0 Interrupt Acknowledge Status register */ #define FR_BZ_INT_ISR0 0x00000090 #define FRF_BZ_INT_ISR_REG_LBN 0 #define FRF_BZ_INT_ISR_REG_WIDTH 64 diff --git a/drivers/net/skfp/ess.c b/drivers/net/skfp/ess.c index a85efcfd9d0e..e8387d25f24a 100644 --- a/drivers/net/skfp/ess.c +++ b/drivers/net/skfp/ess.c @@ -557,7 +557,7 @@ static void ess_send_alc_req(struct s_smc *smc) /* * send never allocation request where the requested payload and - * overhead is zero or deallocate bandwidht when no bandwidth is + * overhead is zero or deallocate bandwidth when no bandwidth is * parsed */ if (!smc->mib.fddiESSPayload) { diff --git a/drivers/net/smsc9420.c b/drivers/net/smsc9420.c index 30110a11d737..34fa10d8ad40 100644 --- a/drivers/net/smsc9420.c +++ b/drivers/net/smsc9420.c @@ -1347,7 +1347,7 @@ static int smsc9420_open(struct net_device *dev) netif_carrier_off(dev); - /* disable, mask and acknowlege all interrupts */ + /* disable, mask and acknowledge all interrupts */ spin_lock_irqsave(&pd->int_lock, flags); int_cfg = smsc9420_reg_read(pd, INT_CFG) & (~INT_CFG_IRQ_EN_); smsc9420_reg_write(pd, INT_CFG, int_cfg); diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c index 2f8a8c32021e..5ba9d989f8fc 100644 --- a/drivers/net/spider_net.c +++ b/drivers/net/spider_net.c @@ -474,7 +474,7 @@ spider_net_prepare_rx_descr(struct spider_net_card *card, * spider_net_enable_rxchtails - sets RX dmac chain tail addresses * @card: card structure * - * spider_net_enable_rxchtails sets the RX DMAC chain tail adresses in the + * spider_net_enable_rxchtails sets the RX DMAC chain tail addresses in the * chip by writing to the appropriate register. DMA is enabled in * spider_net_enable_rxdmac. */ @@ -1820,7 +1820,7 @@ spider_net_enable_card(struct spider_net_card *card) spider_net_write_reg(card, SPIDER_NET_ECMODE, SPIDER_NET_ECMODE_VALUE); - /* set chain tail adress for RX chains and + /* set chain tail address for RX chains and * enable DMA */ spider_net_enable_rxchtails(card); spider_net_enable_rxdmac(card); diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c index 4344017bfaef..70196bc5fe61 100644 --- a/drivers/net/sungem.c +++ b/drivers/net/sungem.c @@ -782,7 +782,7 @@ static int gem_rx(struct gem *gp, int work_to_do) break; /* When writing back RX descriptor, GEM writes status - * then buffer address, possibly in seperate transactions. + * then buffer address, possibly in separate transactions. * If we don't wait for the chip to write both, we could * post a new buffer to this descriptor then have GEM spam * on the buffer address. We sync on the RX completion diff --git a/drivers/net/tehuti.c b/drivers/net/tehuti.c index 0c9780217c87..f5493092521a 100644 --- a/drivers/net/tehuti.c +++ b/drivers/net/tehuti.c @@ -1851,7 +1851,7 @@ static void bdx_tx_push_desc(struct bdx_priv *priv, void *data, int size) * @data - desc's data * @size - desc's size * - * NOTE: this func does check for available space and, if neccessary, waits for + * NOTE: this func does check for available space and, if necessary, waits for * NIC to read existing data before writing new one. */ static void bdx_tx_push_desc_safe(struct bdx_priv *priv, void *data, int size) diff --git a/drivers/net/tokenring/tms380tr.c b/drivers/net/tokenring/tms380tr.c index 21a01753312a..ee71bcfb3753 100644 --- a/drivers/net/tokenring/tms380tr.c +++ b/drivers/net/tokenring/tms380tr.c @@ -693,7 +693,7 @@ static netdev_tx_t tms380tr_hardware_send_packet(struct sk_buff *skb, * NOTE: This function should be used whenever the status of any TPL must be * modified by the driver, because the compiler may otherwise change the * order of instructions such that writing the TPL status may be executed at - * an undesireable time. When this function is used, the status is always + * an undesirable time. When this function is used, the status is always * written when the function is called. */ static void tms380tr_write_tpl_status(TPL *tpl, unsigned int Status) @@ -2264,7 +2264,7 @@ static void tms380tr_rcv_status_irq(struct net_device *dev) * This function should be used whenever the status of any RPL must be * modified by the driver, because the compiler may otherwise change the * order of instructions such that writing the RPL status may be executed - * at an undesireable time. When this function is used, the status is + * at an undesirable time. When this function is used, the status is * always written when the function is called. */ static void tms380tr_write_rpl_status(RPL *rpl, unsigned int Status) diff --git a/drivers/net/tun.c b/drivers/net/tun.c index ce1efa4c0b0d..96c39bddc78c 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -1437,7 +1437,7 @@ static int tun_chr_close(struct inode *inode, struct file *file) __tun_detach(tun); - /* If desireable, unregister the netdevice. */ + /* If desirable, unregister the netdevice. */ if (!(tun->flags & TUN_PERSIST)) { rtnl_lock(); if (dev->reg_state == NETREG_REGISTERED) diff --git a/drivers/net/typhoon.c b/drivers/net/typhoon.c index e3ddcb8f29df..2fbf15235c05 100644 --- a/drivers/net/typhoon.c +++ b/drivers/net/typhoon.c @@ -2096,7 +2096,7 @@ typhoon_tx_timeout(struct net_device *dev) if(typhoon_reset(tp->ioaddr, WaitNoSleep) < 0) { netdev_warn(dev, "could not reset in tx timeout\n"); - goto truely_dead; + goto truly_dead; } /* If we ever start using the Hi ring, it will need cleaning too */ @@ -2105,13 +2105,13 @@ typhoon_tx_timeout(struct net_device *dev) if(typhoon_start_runtime(tp) < 0) { netdev_err(dev, "could not start runtime in tx timeout\n"); - goto truely_dead; + goto truly_dead; } netif_wake_queue(dev); return; -truely_dead: +truly_dead: /* Reset the hardware, and turn off carrier to avoid more timeouts */ typhoon_reset(tp->ioaddr, NoWait); netif_carrier_off(dev); diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c index 23a97518bc1f..1b0aef37e495 100644 --- a/drivers/net/ucc_geth.c +++ b/drivers/net/ucc_geth.c @@ -430,7 +430,7 @@ static void hw_add_addr_in_hash(struct ucc_geth_private *ugeth, ucc_fast_get_qe_cr_subblock(ugeth->ug_info->uf_info.ucc_num); /* Ethernet frames are defined in Little Endian mode, - therefor to insert */ + therefore to insert */ /* the address to the hash (Big Endian mode), we reverse the bytes.*/ set_mac_addr(&p_82xx_addr_filt->taddr.h, p_enet_addr); diff --git a/drivers/net/wan/cosa.c b/drivers/net/wan/cosa.c index b36bf96eb502..f0bd70fb650c 100644 --- a/drivers/net/wan/cosa.c +++ b/drivers/net/wan/cosa.c @@ -811,7 +811,7 @@ static ssize_t cosa_read(struct file *file, cosa_enable_rx(chan); spin_lock_irqsave(&cosa->lock, flags); add_wait_queue(&chan->rxwaitq, &wait); - while(!chan->rx_status) { + while (!chan->rx_status) { current->state = TASK_INTERRUPTIBLE; spin_unlock_irqrestore(&cosa->lock, flags); schedule(); @@ -896,7 +896,7 @@ static ssize_t cosa_write(struct file *file, spin_lock_irqsave(&cosa->lock, flags); add_wait_queue(&chan->txwaitq, &wait); - while(!chan->tx_status) { + while (!chan->tx_status) { current->state = TASK_INTERRUPTIBLE; spin_unlock_irqrestore(&cosa->lock, flags); schedule(); @@ -1153,7 +1153,7 @@ static int cosa_ioctl_common(struct cosa_data *cosa, struct channel_data *channel, unsigned int cmd, unsigned long arg) { void __user *argp = (void __user *)arg; - switch(cmd) { + switch (cmd) { case COSAIORSET: /* Reset the device */ if (!capable(CAP_NET_ADMIN)) return -EACCES; @@ -1704,7 +1704,7 @@ static inline void tx_interrupt(struct cosa_data *cosa, int status) spin_unlock_irqrestore(&cosa->lock, flags); return; } - while(1) { + while (1) { cosa->txchan++; i++; if (cosa->txchan >= cosa->nchannels) @@ -2010,7 +2010,7 @@ again: static void debug_status_in(struct cosa_data *cosa, int status) { char *s; - switch(status & SR_CMD_FROM_SRP_MASK) { + switch (status & SR_CMD_FROM_SRP_MASK) { case SR_UP_REQUEST: s = "RX_REQ"; break; diff --git a/drivers/net/wan/hdlc_cisco.c b/drivers/net/wan/hdlc_cisco.c index f1bff98acd1f..1ceccf1ca6c7 100644 --- a/drivers/net/wan/hdlc_cisco.c +++ b/drivers/net/wan/hdlc_cisco.c @@ -141,7 +141,7 @@ static __be16 cisco_type_trans(struct sk_buff *skb, struct net_device *dev) data->address != CISCO_UNICAST) return cpu_to_be16(ETH_P_HDLC); - switch(data->protocol) { + switch (data->protocol) { case cpu_to_be16(ETH_P_IP): case cpu_to_be16(ETH_P_IPX): case cpu_to_be16(ETH_P_IPV6): @@ -190,7 +190,7 @@ static int cisco_rx(struct sk_buff *skb) cisco_data = (struct cisco_packet*)(skb->data + sizeof (struct hdlc_header)); - switch(ntohl (cisco_data->type)) { + switch (ntohl (cisco_data->type)) { case CISCO_ADDR_REQ: /* Stolen from syncppp.c :-) */ in_dev = dev->ip_ptr; addr = 0; @@ -245,8 +245,8 @@ static int cisco_rx(struct sk_buff *skb) dev_kfree_skb_any(skb); return NET_RX_SUCCESS; - } /* switch(keepalive type) */ - } /* switch(protocol) */ + } /* switch (keepalive type) */ + } /* switch (protocol) */ printk(KERN_INFO "%s: Unsupported protocol %x\n", dev->name, ntohs(data->protocol)); diff --git a/drivers/net/wan/hdlc_x25.c b/drivers/net/wan/hdlc_x25.c index aa9248f8eb1a..6e1ca256effd 100644 --- a/drivers/net/wan/hdlc_x25.c +++ b/drivers/net/wan/hdlc_x25.c @@ -202,10 +202,10 @@ static int x25_ioctl(struct net_device *dev, struct ifreq *ifr) return 0; /* return protocol only, no settable parameters */ case IF_PROTO_X25: - if(!capable(CAP_NET_ADMIN)) + if (!capable(CAP_NET_ADMIN)) return -EPERM; - if(dev->flags & IFF_UP) + if (dev->flags & IFF_UP) return -EBUSY; result=hdlc->attach(dev, ENCODING_NRZ,PARITY_CRC16_PR1_CCITT); diff --git a/drivers/net/wimax/i2400m/fw.c b/drivers/net/wimax/i2400m/fw.c index e803a7dc6502..25c24f0368d8 100644 --- a/drivers/net/wimax/i2400m/fw.c +++ b/drivers/net/wimax/i2400m/fw.c @@ -612,7 +612,7 @@ ssize_t i2400m_bm_cmd(struct i2400m *i2400m, goto error_wait_for_ack; } rx_bytes = result; - /* verify the ack and read more if neccessary [result is the + /* verify the ack and read more if necessary [result is the * final amount of bytes we get in the ack] */ result = __i2400m_bm_ack_verify(i2400m, opcode, ack, ack_size, flags); if (result < 0) diff --git a/drivers/net/wimax/i2400m/i2400m.h b/drivers/net/wimax/i2400m/i2400m.h index 04df9bbe340f..820b128705ec 100644 --- a/drivers/net/wimax/i2400m/i2400m.h +++ b/drivers/net/wimax/i2400m/i2400m.h @@ -627,7 +627,7 @@ enum i2400m_bm_cmd_flags { * @I2400M_BRI_NO_REBOOT: Do not reboot the device and proceed * directly to wait for a reboot barker from the device. * @I2400M_BRI_MAC_REINIT: We need to reinitialize the boot - * rom after reading the MAC adress. This is quite a dirty hack, + * rom after reading the MAC address. This is quite a dirty hack, * if you ask me -- the device requires the bootrom to be * intialized after reading the MAC address. */ diff --git a/drivers/net/wimax/i2400m/sdio.c b/drivers/net/wimax/i2400m/sdio.c index 76a50ac02ebb..14f876b1358b 100644 --- a/drivers/net/wimax/i2400m/sdio.c +++ b/drivers/net/wimax/i2400m/sdio.c @@ -304,7 +304,7 @@ error_kzalloc: * * The device will be fully reset internally, but won't be * disconnected from the bus (so no reenumeration will - * happen). Firmware upload will be neccessary. + * happen). Firmware upload will be necessary. * * The device will send a reboot barker that will trigger the driver * to reinitialize the state via __i2400m_dev_reset_handle. @@ -314,7 +314,7 @@ error_kzalloc: * * The device will be fully reset internally, disconnected from the * bus an a reenumeration will happen. Firmware upload will be - * neccessary. Thus, we don't do any locking or struct + * necessary. Thus, we don't do any locking or struct * reinitialization, as we are going to be fully disconnected and * reenumerated. * diff --git a/drivers/net/wimax/i2400m/usb.c b/drivers/net/wimax/i2400m/usb.c index 98f4f8c5fb68..99f04c475898 100644 --- a/drivers/net/wimax/i2400m/usb.c +++ b/drivers/net/wimax/i2400m/usb.c @@ -246,7 +246,7 @@ error_kzalloc: * * The device will be fully reset internally, but won't be * disconnected from the USB bus (so no reenumeration will - * happen). Firmware upload will be neccessary. + * happen). Firmware upload will be necessary. * * The device will send a reboot barker in the notification endpoint * that will trigger the driver to reinitialize the state @@ -257,7 +257,7 @@ error_kzalloc: * * The device will be fully reset internally, disconnected from the * USB bus an a reenumeration will happen. Firmware upload will be - * neccessary. Thus, we don't do any locking or struct + * necessary. Thus, we don't do any locking or struct * reinitialization, as we are going to be fully disconnected and * reenumerated. * diff --git a/drivers/net/wireless/ath/ar9170/main.c b/drivers/net/wireless/ath/ar9170/main.c index a6452af9c6c5..08dc42da0f63 100644 --- a/drivers/net/wireless/ath/ar9170/main.c +++ b/drivers/net/wireless/ath/ar9170/main.c @@ -2512,7 +2512,7 @@ void *ar9170_alloc(size_t priv_size) /* * this buffer is used for rx stream reconstruction. * Under heavy load this device (or the transport layer?) - * tends to split the streams into seperate rx descriptors. + * tends to split the streams into separate rx descriptors. */ skb = __dev_alloc_skb(AR9170_MAX_RX_BUFFER_SIZE, GFP_KERNEL); diff --git a/drivers/net/wireless/iwmc3200wifi/lmac.h b/drivers/net/wireless/iwmc3200wifi/lmac.h index a3a79b5e2898..a855a99e49b8 100644 --- a/drivers/net/wireless/iwmc3200wifi/lmac.h +++ b/drivers/net/wireless/iwmc3200wifi/lmac.h @@ -262,7 +262,7 @@ struct iwm_ct_kill_cfg_cmd { /* Power Management */ #define POWER_TABLE_CMD 0x77 -#define SAVE_RESTORE_ADRESS_CMD 0x78 +#define SAVE_RESTORE_ADDRESS_CMD 0x78 #define REPLY_WATERMARK_CMD 0x79 #define PM_DEBUG_STATISTIC_NOTIFIC 0x7B #define PD_FLUSH_N_NOTIFICATION 0x7C diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index ee34c137e7cd..9b04964deced 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -368,7 +368,7 @@ static int rt2500usb_config_key(struct rt2x00_dev *rt2x00dev, /* * The encryption key doesn't fit within the CSR cache, - * this means we should allocate it seperately and use + * this means we should allocate it separately and use * rt2x00usb_vendor_request() to send the key to the hardware. */ reg = KEY_ENTRY(key->hw_key_idx); @@ -382,7 +382,7 @@ static int rt2500usb_config_key(struct rt2x00_dev *rt2x00dev, /* * The driver does not support the IV/EIV generation * in hardware. However it demands the data to be provided - * both seperately as well as inside the frame. + * both separately as well as inside the frame. * We already provided the CONFIG_CRYPTO_COPY_IV to rt2x00lib * to ensure rt2x00lib will not strip the data from the * frame after the copy, now we must tell mac80211 diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index 5e4ee2023fcf..d27d7d5d850c 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -99,7 +99,7 @@ static int rt2800usb_check_firmware(struct rt2x00_dev *rt2x00dev, * There are 2 variations of the rt2870 firmware. * a) size: 4kb * b) size: 8kb - * Note that (b) contains 2 seperate firmware blobs of 4k + * Note that (b) contains 2 separate firmware blobs of 4k * within the file. The first blob is the same firmware as (a), * but the second blob is for the additional chipsets. */ @@ -117,7 +117,7 @@ static int rt2800usb_check_firmware(struct rt2x00_dev *rt2x00dev, /* * 8kb firmware files must be checked as if it were - * 2 seperate firmware files. + * 2 separate firmware files. */ while (offset < len) { if (!rt2800usb_check_crc(data + offset, 4096)) diff --git a/drivers/net/wireless/rt2x00/rt2x00debug.c b/drivers/net/wireless/rt2x00/rt2x00debug.c index 70c04c282efc..28a1c46ec4eb 100644 --- a/drivers/net/wireless/rt2x00/rt2x00debug.c +++ b/drivers/net/wireless/rt2x00/rt2x00debug.c @@ -109,7 +109,7 @@ struct rt2x00debug_intf { /* * HW crypto statistics. - * All statistics are stored seperately per cipher type. + * All statistics are stored separately per cipher type. */ struct rt2x00debug_crypto crypto_stats[CIPHER_MAX]; diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index b93731b79903..dd5ab8fe2321 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -394,7 +394,7 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev, /* * Hardware might have stripped the IV/EIV/ICV data, * in that case it is possible that the data was - * provided seperately (through hardware descriptor) + * provided separately (through hardware descriptor) * in which case we should reinsert the data into the frame. */ if ((rxdesc.dev_flags & RXDONE_CRYPTO_IV) && diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index 0b4801a14601..5b6b789cad3d 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -497,7 +497,7 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb, /* * When hardware encryption is supported, and this frame * is to be encrypted, we should strip the IV/EIV data from - * the frame so we can provide it to the driver seperately. + * the frame so we can provide it to the driver separately. */ if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc.flags) && !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc.flags)) { diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index e2da928dd9f0..177472742172 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -476,7 +476,7 @@ static int rt61pci_config_pairwise_key(struct rt2x00_dev *rt2x00dev, * The driver does not support the IV/EIV generation * in hardware. However it doesn't support the IV/EIV * inside the ieee80211 frame either, but requires it - * to be provided seperately for the descriptor. + * to be provided separately for the descriptor. * rt2x00lib will cut the IV/EIV data out of all frames * given to us by mac80211, but we must tell mac80211 * to generate the IV/EIV data. diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index f39a8ed17841..e77aec8d0a84 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -339,7 +339,7 @@ static int rt73usb_config_shared_key(struct rt2x00_dev *rt2x00dev, * The driver does not support the IV/EIV generation * in hardware. However it doesn't support the IV/EIV * inside the ieee80211 frame either, but requires it - * to be provided seperately for the descriptor. + * to be provided separately for the descriptor. * rt2x00lib will cut the IV/EIV data out of all frames * given to us by mac80211, but we must tell mac80211 * to generate the IV/EIV data. @@ -439,7 +439,7 @@ static int rt73usb_config_pairwise_key(struct rt2x00_dev *rt2x00dev, * The driver does not support the IV/EIV generation * in hardware. However it doesn't support the IV/EIV * inside the ieee80211 frame either, but requires it - * to be provided seperately for the descriptor. + * to be provided separately for the descriptor. * rt2x00lib will cut the IV/EIV data out of all frames * given to us by mac80211, but we must tell mac80211 * to generate the IV/EIV data. @@ -1661,7 +1661,7 @@ static void rt73usb_fill_rxdone(struct queue_entry *entry, /* * Hardware has stripped IV/EIV data from 802.11 frame during - * decryption. It has provided the data seperately but rt2x00lib + * decryption. It has provided the data separately but rt2x00lib * should decide if it should be reinserted. */ rxdesc->flags |= RX_FLAG_IV_STRIPPED; diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c index 2d555cc30508..a22a19203120 100644 --- a/drivers/net/wireless/zd1211rw/zd_mac.c +++ b/drivers/net/wireless/zd1211rw/zd_mac.c @@ -374,7 +374,7 @@ static void zd_mac_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb, * zd_mac_tx_failed - callback for failed frames * @dev: the mac80211 wireless device * - * This function is called if a frame couldn't be successfully be + * This function is called if a frame couldn't be successfully * transferred. The first frame from the tx queue, will be selected and * reported as error to the upper layers. */ diff --git a/drivers/parport/ChangeLog b/drivers/parport/ChangeLog deleted file mode 100644 index 8565bbbeb6ec..000000000000 --- a/drivers/parport/ChangeLog +++ /dev/null @@ -1,583 +0,0 @@ -2001-10-11 Tim Waugh <twaugh@redhat.com> - * parport_pc.c, parport_serial.c: Support for NetMos cards. - + Patch originally from Michael Reinelt <reinelt@eunet.at>. - -2002-04-25 Tim Waugh <twaugh@redhat.com> - - * parport_serial.c, parport_pc.c: Move some SIIG cards around. - Patch from Andrey Panin. - -2002-01-20 Tim Waugh <twaugh@redhat.com> - - * parport_pc.c (parport_pc_compat_write_block_pio, - parport_pc_ecp_write_block_pio, parport_pc_ecp_read_block_pio): - Use the default implementations if the caller wants to use - O_NONBLOCK. - -2002-02-25 Tim Waugh <twaugh@redhat.com> - - * parport_pc.c: Make sure that priv->ctr_writable includes IntEn - even if IRQ is given as a parameter. - -2002-01-21 Tim Waugh <twaugh@redhat.com> - - * daisy.c: Apply patch from Max Vorobiev to make parport_daisy_select - work for ECP/EPP modes. - -2002-01-13 Niels Kristian Bech Jensen <nkbj@image.dk> - - * parport_pc.c: Change some occurrences of frob_set_mode to - ECR_WRITE. This fixes PLIP. - -2002-01-04 Tim Waugh <twaugh@redhat.com> - - * share.c (parport_claim_or_block): Sleep interruptibly to prevent - a possible deadlock. - -2001-12-07 Damian Gruszka <damian.gruszka@VisionSystems.de> - - * parport_pc.c (ECR_WRITE): Define. If there are forbidden bits - in the ECR register for some chips, this will be a useful place to - put that knowledge. - (change_mode): Use ECR_WRITE. - (parport_pc_restore_state): Likewise. - (parport_ECPPS2_supported): Likewise. - (parport_ECPEPP_supported): Likewise. - (irq_probe_EPP): Likewise. - (programmable_irq_support): Likewise. - (programmable_dma_support): Likewise. - (parport_pc_probe_port): Likewise. - - (frob_set_mode): New function. Set the mode bits of the ECR. - (get_fifo_residue): Use frob_set_mode. - (parport_pc_ecpepp_read_data): Likewise. - (parport_pc_ecpepp_write_data): Likewise. - (parport_pc_ecpepp_read_addr): Likewise. - (parport_pc_ecpepp_write_addr): Likewise. - (parport_pc_compat_write_block_pio): Likewise. - (parport_pc_ecp_write_block_pio): Likewise. - (parport_ECR_present): Likewise. - (parport_ECP_supported): Likewise. - (parport_EPP_supported): Likewise. - (parport_ECPEPP_supported): Likewise. - (programmable_irq_support): Likewise. - (irq_probe_ECP): Likewise. - (programmable_dma_support): Likewise. - - (parport_pc_enable_irq): Only enable interrupts if we know which - IRQ line they will come from. - (parport_pc_init_state): Set nErrIntrEn at initialisation. - (parport_pc_restore_state): Only write writable bits of CTR. - (parport_irq_probe): If no IRQ is found, take ackIntEn out of the - writable bit set. - -2001-12-07 Tim Waugh <twaugh@redhat.com> - - * parport_pc.c (parport_pc_fifo_write_block_pio): Correct typo. - (parport_pc_init_state): Only set ackIntEn if we know which IRQ - line the interrupts will come from. - -2001-12-07 Tim Waugh <twaugh@redhat.com> - - * ieee1284_ops.c (parport_ieee1284_epp_write_addr, - parport_ieee1284_epp_read_addr): Actually do something useful. - -2001-12-07 Tim Waugh <twaugh@redhat.com> - - * parport_pc.c (dmaval): Don't use DMA by default. It seems to be - too buggy at the moment. Use 'dma=auto' to restore the previous - behaviour. - -2001-12-07 Tim Waugh <twaugh@redhat.com> - - * daisy.c (DEBUG): Undefine. - -2001-12-06 Tim Waugh <twaugh@redhat.com> - - * ieee1284_ops.c (parport_ieee1284_ecp_read_data): Mask off - PARPORT_CONTROL_AUTOFD as well. Bug spotted by Joe - <joeja@mindspring.com>. - -2001-12-03 Rich Liu <Rich.Liu@ite.com.tw> - - * parport_pc.c (sio_ite_8872_probe): ITE8873 is a single-port - serial board, not a serial+parallel. - -2001-11-30 Niels Kristian Bech Jensen <nkbj@image.dk> - - * parport_pc.c: Fix compiler warning. - -2001-11-14 Tim Waugh <twaugh@redhat.com> - - * parport_pc.c (parport_pc_pci_probe): Hooks for PCI cards before - and after probing for ports. - * parport_serial.c (parport_register): Likewise. - -2001-11-12 Tim Waugh <twaugh@redhat.com> - - * parport_pc.c (init_module): Warn when parameters are ignored. - -2001-11-01 Damian Gruszka <damian.gruszka@VisionSystems.de> - - * parport_serial.c (serial_register): Set base_baud before - calling register_serial. - -2001-10-26 Tim Waugh <twaugh@redhat.com> - - * parport_pc.c (parport_irq_probe): When ECR programmable IRQ - support fails, generate interrupts using the FIFO even if we don't - want to use the FIFO for real data transfers. - (parport_pc_probe_port): Display the ECR address if we have an - ECR, not just if we will use the FIFO. - -2001-10-24 Dave Strauss <D.Strauss@motorola.com> - - * parport_pc.c (parport_pc_compat_write_block_pio, - parport_pc_ecp_write_block_pio): Allow a few seconds for an ECP - transfer to finish up. - -2001-10-11 Tim Waugh <twaugh@redhat.com> - - * parport_pc (sio_ite_8872_probe): New function, submitted by Rich - Liu from ITE. Cleaned up, removed bogus phys_to_virt calls. - -2001-10-24 Tim Waugh <twaugh@redhat.com> - - * parport_pc.c: Support for AKS AladdinCARD. Patch from - Aladdin Knowledge Systems (Christian Groessler). - -2001-10-24 Tim Waugh <twaugh@redhat.com> - - * ieee1284_ops.c (parport_ieee1284_ecp_read_data): Try to minimise - turnaround time. - - * ieee1284.c (parport_poll_peripheral): Try a couple of times - first without delaying. - -2001-10-10 Tim Waugh <twaugh@redhat.com> - - * parport_pc.c: Support for OX16PCI954 PCI card. - -2001-10-10 Tim Waugh <twaugh@redhat.com> - - * parport_pc.c: Support for OX12PCI840 PCI card (reported by - mk@daveg.com). Lock-ups diagnosed by Ronnie Arosa (and now we - just don't trust its ECR). - -2001-10-10 Gunther Mayer <gunther.mayer@braunschweig.okersurf.de> - - * parport_pc.c: Support for AVLAB cards. - -2001-10-10 Tim Waugh <twaugh@redhat.com> - - * ieee1284_ops.c (ecp_forward_to_reverse, ecp_reverse_to_forward): - Remember to retry direction switch if it fails. Patch from David - Lambert. - -2001-10-08 David C. Hansen <haveblue@us.ibm.com> - - * share.c: Make driverlist_lock and parportlist_lock static. - -2001-10-08 Philip Blundell <philb@gnu.org> - - * parport_pc.c: New modular parameter verbose_logging. - Make port->modes indicate the modes that we are prepared to use, - rather than the modes that are available. - -2001-10-07 Tim Waugh <twaugh@redhat.com> - - * parport_pc.c (parport_pc_probe_port): Fix memory leak spotted by - Kipp Cannon. - -2001-10-07 Tim Waugh <twaugh@redhat.com> - - * parport_serial.c: Remove NetMos support, since it causes problems - for some people. - -2001-08-30 Tim Waugh <twaugh@redhat.com> - - * parport_serial.c (parport_serial_pci_probe): Clean-up on partial - registration failure. - -2001-08-14 Tim Waugh <twaugh@redhat.com> - - * parport_pc.c (parport_pc_init_superio): Allow for more than one - SuperIO device. Patch from Rich Lio (ITE). - -2001-08-11 Tim Waugh <twaugh@redhat.com> - - * parport_pc.c: Support for Titan Electronics cards. - -2001-08-08 Tim Waugh <twaugh@redhat.com> - - * share.c (parport_unregister_device): Remove device from wait list - too. - -2001-06-20 Tim Waugh <twaugh@redhat.com> - - * parport_pc.c: Make 'io_hi=0' work. - -2001-05-31 Tim Waugh <twaugh@redhat.com> - - * parport_serial.c: New file. - -2001-06-05 Tim Waugh <twaugh@redhat.com> - - * parport_pc.c (parport_pc_unregister_port): New exported function. - Do the opposite of parport_pc_probe_port. - (cleanup_module): Use it. - -2001-05-22 Juan Quintela <quintela@mandrakesoft.com> - - * parport_amiga.c: Set printk levels. - * parport_gsc.c: Likewise. - * parport_mfc3.c: Likewise. - * parport_pc.c: Likewise. - * parport_sunbpp.c: Likewise. - * probe.c: Likewise. - * share.c: Likewise. - -2001-05-10 Fred Barnes <frmb2@ukc.ac.uk> - - * parport_pc.c (parport_pc_epp_read_data): added support for - reading from a w91284pic peripheral, flag is PARPORT_W91284PIC. - -2001-05-07 Fred Barnes <frmb2@ukc.ac.uk> - - * parport_pc.c (parport_pc_epp_read_data, - parport_pc_epp_write_data, parport_pc_epp_read_addr, - parport_pc_epp_write_addr): support for fast reads/writes using - the PARPORT_EPP_FAST flag. - - * ieee1284.c (parport_read, parport_write): added code to handle - software EPP mode (IEEE1284_MODE_EPPSWE). Added code to allow - BYTE mode reverse transfers (previously always went for NIBBLE - mode). - - * ieee1284_ops.c (parport_ieee1284_epp_read_data, - parport_ieee1284_epp_write_data): fixed various polarity problems. - Also (theoretically) fixed address versions (.._addr), but no - hardware to test this on. - - * parport_pc.h: added parport_dump_state() function for debugging. - Needs to have DEBUG_PARPORT to be defined for it to be included. - -2001-05-03 Tim Waugh <twaugh@redhat.com> - - * parport_pc.c: Fix the compile problem I introduce from the last - change. - -2001-04-20 Paul Gortmaker <p_gortmaker@yahoo.com> - - * parport_pc.c: Cut down the size quite a bit (more than 4k off - the object, about 1k off the zImage) for the older non-PCI - machines which are typically resource starved anyway... - -2001-03-26 R Horn <rjh@world.std.com> - - * parport_pc.c: Some commentary changes. - -2001-04-19 Tim Waugh <twaugh@redhat.com> - - * parport_pc.c (parport_pc_probe_port): Remove __devinit - attribute. Export unconditionally. - -2001-04-14 Jeff Garzik <jgarzik@pobox.com> - - Merged: 2001-03-30 Tim Waugh <twaugh@redhat.com> - - * drivers/parport/parport_pc.c: Make Via SuperIO chipsets behave - like everything else with respect to irq= and dma= parameters. - -2001-04-08 Tim Waugh <twaugh@redhat.com> - - * parport_pc.c (parport_pc_save_state): Read from the soft copy of - the control port. - (parport_pc_restore_state): Update the soft copy of the control - port. - -2001-03-26 Tim Waugh <twaugh@redhat.com> - - * share.c (parport_find_number, parport_find_base): Trigger - a lowlevel driver load if there are no ports yet. - -2001-03-26 Tim Waugh <twaugh@redhat.com> - - * parport_pc.c (parport_ECP_supported): Remove the IRQ conflict - check since it seems totally unreliable. - -2001-03-02 Tim Waugh <twaugh@redhat.com> - - * ieee1284_ops.c (parport_ieee1284_read_nibble): Reset nAutoFd - on timeout. Matches 2.2.x behaviour. - -2001-03-02 Andrew Morton - - * parport_pc.c (registered_parport): New static variable. - (parport_pc_find_ports): Set it when we register PCI driver. - (init_module): Unregister PCI driver if necessary when we - fail. - -2001-03-02 Tim Waugh <twaugh@redhat.com> - - * ieee1284_ops.c (parport_ieee1284_write_compat): Don't use - down_trylock to reset the IRQ count. Don't even use sema_init, - because it's not even necessary to reset the count. I can't - remember why we ever did. - -2001-01-04 Peter Osterlund <peter.osterlund@mailbox.swipnet.se> - - * ieee1284.c (parport_negotiate): Fix missing printk argument. - -2001-01-03 Paul Schleger <Paul.Schleger@t-online.de> - - * probe.c (parse_data): Get rid of trailing blanks in values. - Needed for XEROX XJ8C printer. - -2001-01-03 Tim Waugh <twaugh@redhat.com> - - * parport_pc.c (parport_pc_probe_port): Say something when probes - are omitted. - -2001-01-03 Tim Waugh <twaugh@redhat.com> - - * parport_pc.c (sio_via_686a_probe): Correct dma=255 fix. - -2000-11-21 Tim Waugh <twaugh@redhat.com> - - * parport_pc.c (parport_pc_ecp_write_block_pio): Fix - reverse-to-forward logic. Spotted by Roland Kuck - <rci@cityweb.de>. - -2000-09-16 Cesar Eduardo Barros <cesarb@nitnet.com.br> - - * parport_pc.c (sio_via_686a_probe): Handle case - where hardware returns 255 for IRQ or DMA. - -2000-07-20 Eddie C. Dost <ecd@skynet.be> - - * share.c (attach_driver_chain): attach[i](port) needs to be - replaced by attach[count](port). - -2000-07-20 Eddie C. Dost <ecd@skynet.be> - - * daisy.c (add_dev): kmalloc args are in wrong order. - -2000-07-12 Tim Waugh <twaugh@redhat.com> - - * share.c: Documentation for parport_{get,port}_port, - parport_find_{number,base}. - -2000-07-12 Tim Waugh <twaugh@redhat.com> - - * share.c (parport_unregister_device): Remove unneeded locking - (test cad==dev). - (parport_claim): Likewise. - (parport_find_number): New function. - -2000-07-12 Tim Waugh <twaugh@redhat.com> - - * share.c (parport_register_port): Hold the parportlist_lock while - looking for a free parport number. - (parport_register_driver): Make sure that attach can block. - (attach_driver_chain): Likewise. - -2000-07-12 Tim Waugh <twaugh@redhat.com> - - * share.c (call_driver_chain): Do reference counting things. - (parport_get_port): New function. - (parport_put_port): New function. - (parport_register_port): Initialise reference count to zero. - (parport_unregister_port): Check reference count rather than - driver list to see if we can free the port. - -2000-07-12 Tim Waugh <twaugh@redhat.com> - - * share.c: Clarifications in doc comments. - -2000-07-12 Tim Waugh <twaugh@redhat.com> - - * share.c (parport_unregister_port): Fix typo in comment. - -2000-07-11 Gunther Mayer <gunther.mayer@braunschweig.okersurf.de> - - * parport_pc.c: Support for the full range of Timedia cards. - -2000-07-08 Tim Waugh <twaugh@redhat.com> - - * daisy.c: License block comments as part of parportbook. - * ieee1284.c: Likewise. - * share.c: Likewise. - -2000-06-30 Petr Vandrovec <vandrove@vc.cvut.cz> - - * procfs.c (do_hardware_modes): Generated string can be up to 34 - chars long. - -2000-06-20 Gunther Mayer <gunther.mayer@braunschweig.okersurf.de> - - * parport_pc.c (parport_pc_compat_write_block_pio): Warn about - change_mode failures. - (parport_pc_ecp_write_block_pio): Likewise. - (parport_pc_ecp_read_block_pio): Likewise. - -2000-06-20 Gunther Mayer <gunther.mayer@braunschweig.okersurf.de> - - * parport_pc.c (parport_SPP_supported): Warn more about possibly - incorrect parameters. - -2000-06-15 Tim Waugh <twaugh@redhat.com> - - * parport_pc.c (parport_ECP_supported): Set PARPORT_MODE_COMPAT - for ECP ports, since they can all do hardware accelerated - compatibility mode (I assume). - -2000-06-13 Tim Waugh <twaugh@redhat.com> - - * parport_pc.c (cleanup_module): Remark about possible bugs. - -2000-06-13 Tim Waugh <twaugh@redhat.com> - - * procfs.c: Break 'hardware' out into separate files. - -2000-05-28 Gunther Mayer <gunther.mayer@braunschweig.okersurf.de> - - * Fix PCI ID printk for non-superio PCI cards. - -2000-05-28 Tim Waugh <twaugh@redhat.com> - - * share.c (call_driver_chain): Get the driverlist_lock. - (parport_register_device): Make sure that port->devices always - looks consistent. - (parport_register_driver): Ensure that parport drivers are given - parameters that are valid for the duration of the callback by - locking the portlist against changes. - (parport_unregister_driver): Likewise. - (parport_claim): Don't overwrite flags. - -2000-05-28 Tim Waugh <twaugh@redhat.com> - - * daisy.c (assign_addrs): Avoid double-probing daisy-chain devices - if the first probe succeeds. - -2000-05-16 Tim Waugh <twaugh@redhat.com> - - * share.c (parport_claim): Fix SMP race. - -2000-05-15 Gunther Mayer <gunther.mayer@braunschweig.okersurf.de> - - * parport_pc.c (parport_pc_compat_write_block_pio): Check for - timeouts. - (parport_pc_ecp_write_block_pio): Likewise. - (parport_pc_ecp_read_block_pio): Likewise. - -2000-05-02 Gunther Mayer <gunther.mayer@braunschweig.okersurf.de> - - * parport_pc.c: PCI SYBA patch and verbose PCI detection. - -2000-05-02 Gunther Mayer <gunther.mayer@braunschweig.okersurf.de> - - * parport_pc.c (decode_smsc): Fix SMSC 665/666 identification. - -2000-04-28 Tim Waugh <twaugh@redhat.com> - - * ieee1284.c: Short function descriptions can't be multiline. - - * daisy.c: Short function descriptions can't be multiline. - -2000-04-19 Tim Waugh <twaugh@redhat.com> - - * parport_pc.c (parport_pc_fifo_write_block_dma): Make maxlen - calculation a bit clearer. - - * ieee1284.c (parport_negotiate): Turn on data line drivers. - - * ieee1284_ops.c (parport_ieee1284_read_byte): Turn off data line - drivers. - (parport_ieee1284_write_compat): Turn on data line drivers. - - * daisy.c (assign_addrs): Turn on data line drivers. - (cpp_mux): Likewise. - (cpp_daisy): Likewise. - -2000-04-04 Tim Waugh <twaugh@redhat.com> - - * parport_pc.c: Add support for another PCI card. - -2000-04-04 Tim Waugh <twaugh@redhat.com> - - * daisy.c: Documentation in kernel-doc format. - - * ieee1284.c: Likewise. - - * share.c: Likewise. - -2000-04-01 Tim Waugh <twaugh@redhat.com> - - * share.c (parport_register_device): Need to hold the module - reference counts before sleeping. - -2000-03-27 Tim Waugh <twaugh@redhat.com> - - * parport_pc.c (parport_pc_ecp_read_block_pio): Correct operation - when peripheral is trying to send data when we stop listening. - -2000-03-22 Tim Waugh <twaugh@redhat.com> - - * init.c (parport_setup): Fix return value. - -2000-03-21 Tim Waugh <twaugh@redhat.com> - - * parport_pc.c (parport_pc_pci_probe): Fix return value; call - pci_enable_device. - -2000-03-16 Tim Waugh <twaugh@redhat.com> - - * parport_pc.c (parport_ECP_supported): This seems to trigger on - machines that don't have an IRQ conflict; toned down the warning - message accordingly. - -2000-03-16 Gunther Mayer <gunther.mayer@braunschweig.netsurf.de> - - * parport_pc.c (show_parconfig_smsc37c669): Fix typo. - (decode_winbond): More IDs. - (winbond_check): Protect against false positives. - (winbond_check2): Likewise. - (smsc_check): Likewise. - -2000-03-15 Tim Waugh <twaugh@redhat.com> - - * parport_pc.c (cleanup_module): Don't call pci_unregister_driver - if we didn't call pci_register_driver first. - -2000-03-13 Tim Waugh <twaugh@redhat.com> - - * parport_pc.c (parport_pc_init): Moved from asm/parport.h. - - * Config.in: CONFIG_PARPORT_PC_SUPERIO: new option. - - * parport_pc.c (show_parconfig_smsc37c669): Make __devinit. - (show_parconfig_winbond): Likewise. - (decode_winbond): Likewise. - (decode_smsc): Likewise. - (winbond_check): Likewise. - (winbond_check2): Likewise. - (smsc_check): Likewise. - (detect_and_report_winbond): Likewise. - (detect_and_report_smsc): Likewise. - (get_superio_dma): Likewise. - (get_superio_irq): Likewise. - (parport_pc_find_isa_ports): New function. - (parport_pc_find_ports): New function. - (init_module): Make superio a config option, not a parameter. - -2000-03-10 Tim Waugh <twaugh@redhat.com> - - * parport_pc.c (decode_winbond): Use correct 83877ATF chip ID. - (decode_winbond): Fix typo. - -2000-03-09 Tim Waugh <twaugh@redhat.com> - - * parport_pc.c: Integrate SuperIO PCI probe with normal PCI card - probe, so that the MODULE_DEVICE_TABLE is complete. - diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index e7b0c3bcef89..c64e3528889b 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -1668,7 +1668,7 @@ static void tpacpi_remove_driver_attributes(struct device_driver *drv) * Table of recommended minimum BIOS versions * * Reasons for listing: - * 1. Stable BIOS, listed because the unknown ammount of + * 1. Stable BIOS, listed because the unknown amount of * bugs and bad ACPI behaviour on older versions * * 2. BIOS or EC fw with known bugs that trigger on Linux @@ -7108,7 +7108,7 @@ static struct ibm_struct volume_driver_data = { * * Fan speed changes of any sort (including those caused by the * disengaged mode) are usually done slowly by the firmware as the - * maximum ammount of fan duty cycle change per second seems to be + * maximum amount of fan duty cycle change per second seems to be * limited. * * Reading is not available if GFAN exists. diff --git a/drivers/s390/char/raw3270.c b/drivers/s390/char/raw3270.c index 62ddf5202b79..2a4c566456e7 100644 --- a/drivers/s390/char/raw3270.c +++ b/drivers/s390/char/raw3270.c @@ -373,7 +373,7 @@ raw3270_irq (struct ccw_device *cdev, unsigned long intparm, struct irb *irb) rq->rc = ccw_device_start(rp->cdev, &rq->ccw, (unsigned long) rq, 0, 0); if (rq->rc == 0) - return; /* Sucessfully restarted. */ + return; /* Successfully restarted. */ break; case RAW3270_IO_STOP: if (!rq) diff --git a/drivers/s390/char/sclp.c b/drivers/s390/char/sclp.c index ec88c59842e3..f6d72e1f2a38 100644 --- a/drivers/s390/char/sclp.c +++ b/drivers/s390/char/sclp.c @@ -196,7 +196,7 @@ __sclp_start_request(struct sclp_req *req) req->start_count++; if (rc == 0) { - /* Sucessfully started request */ + /* Successfully started request */ req->status = SCLP_REQ_RUNNING; sclp_running_state = sclp_running_state_running; __sclp_set_request_timer(SCLP_RETRY_INTERVAL * HZ, diff --git a/drivers/scsi/a100u2w.c b/drivers/scsi/a100u2w.c index 208d6df9ed59..ff5716d5f044 100644 --- a/drivers/scsi/a100u2w.c +++ b/drivers/scsi/a100u2w.c @@ -492,7 +492,7 @@ static void init_alloc_map(struct orc_host * host) * init_orchid - initialise the host adapter * @host:host adapter to initialise * - * Initialise the controller and if neccessary load the firmware. + * Initialise the controller and if necessary load the firmware. * * Returns -1 if the initialisation fails. */ diff --git a/drivers/scsi/initio.c b/drivers/scsi/initio.c index 89a59484be02..a7714160fbc3 100644 --- a/drivers/scsi/initio.c +++ b/drivers/scsi/initio.c @@ -531,7 +531,7 @@ static void initio_read_eeprom(unsigned long base) * initio_stop_bm - stop bus master * @host: InitIO we are stopping * - * Stop any pending DMA operation, aborting the DMA if neccessary + * Stop any pending DMA operation, aborting the DMA if necessary */ static void initio_stop_bm(struct initio_host * host) diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c index 6fde2fabfd9b..774e7ac837a5 100644 --- a/drivers/scsi/libfc/fc_fcp.c +++ b/drivers/scsi/libfc/fc_fcp.c @@ -48,7 +48,7 @@ struct kmem_cache *scsi_pkt_cachep; #define FC_SRB_CMD_SENT (1 << 0) /* cmd has been sent */ #define FC_SRB_RCV_STATUS (1 << 1) /* response has arrived */ #define FC_SRB_ABORT_PENDING (1 << 2) /* cmd abort sent to device */ -#define FC_SRB_ABORTED (1 << 3) /* abort acknowleged */ +#define FC_SRB_ABORTED (1 << 3) /* abort acknowledged */ #define FC_SRB_DISCONTIG (1 << 4) /* non-sequential data recvd */ #define FC_SRB_COMPL (1 << 5) /* fc_io_compl has been run */ #define FC_SRB_FCP_PROCESSING_TMO (1 << 6) /* timer function processing */ @@ -519,7 +519,7 @@ crc_err: * * Called after receiving a Transfer Ready data descriptor. * If the LLD is capable of sequence offload then send down the - * seq_blen ammount of data in single frame, otherwise send + * seq_blen amount of data in single frame, otherwise send * multiple frames of the maximum frame payload supported by * the target port. */ diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index 08b6634cb994..2a40a6eabf4d 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -981,7 +981,7 @@ lpfc_issue_els_flogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, * function returns, it does not guarantee all the IOCBs are actually aborted. * * Return code - * 0 - Sucessfully issued abort iocb on all outstanding flogis (Always 0) + * 0 - Successfully issued abort iocb on all outstanding flogis (Always 0) **/ int lpfc_els_abort_flogi(struct lpfc_hba *phba) @@ -3129,7 +3129,7 @@ lpfc_cmpl_els_rsp(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, if (ndlp && NLP_CHK_NODE_ACT(ndlp) && (*((uint32_t *) (pcmd)) == ELS_CMD_LS_RJT)) { /* A LS_RJT associated with Default RPI cleanup has its own - * seperate code path. + * separate code path. */ if (!(ndlp->nlp_flag & NLP_RM_DFLT_RPI)) ls_rjt = 1; diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index 7f21b47db791..483fb74bc592 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -1575,7 +1575,7 @@ lpfc_bg_scsi_prep_dma_buf(struct lpfc_hba *phba, case LPFC_PG_TYPE_NO_DIF: num_bde = lpfc_bg_setup_bpl(phba, scsi_cmnd, bpl, datasegcnt); - /* we shoud have 2 or more entries in buffer list */ + /* we should have 2 or more entries in buffer list */ if (num_bde < 2) goto err; break; @@ -1612,7 +1612,7 @@ lpfc_bg_scsi_prep_dma_buf(struct lpfc_hba *phba, num_bde = lpfc_bg_setup_bpl_prot(phba, scsi_cmnd, bpl, datasegcnt, protsegcnt); - /* we shoud have 3 or more entries in buffer list */ + /* we should have 3 or more entries in buffer list */ if (num_bde < 3) goto err; break; diff --git a/drivers/scsi/pcmcia/nsp_cs.h b/drivers/scsi/pcmcia/nsp_cs.h index 7db28cd49446..8c61a4fe1db9 100644 --- a/drivers/scsi/pcmcia/nsp_cs.h +++ b/drivers/scsi/pcmcia/nsp_cs.h @@ -187,7 +187,7 @@ #define S_IO BIT(1) /* Input/Output line from SCSI bus */ #define S_CD BIT(2) /* Command/Data line from SCSI bus */ #define S_BUSY BIT(3) /* Busy line from SCSI bus */ -#define S_ACK BIT(4) /* Acknowlege line from SCSI bus */ +#define S_ACK BIT(4) /* Acknowledge line from SCSI bus */ #define S_REQUEST BIT(5) /* Request line from SCSI bus */ #define S_SELECT BIT(6) /* */ #define S_ATN BIT(7) /* */ diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c index 9b44c6f1b10e..7985ae45d688 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.c +++ b/drivers/scsi/pm8001/pm8001_hwi.c @@ -2924,7 +2924,7 @@ hw_event_sas_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb) break; default: PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("unkown device type(%x)\n", deviceType)); + pm8001_printk("unknown device type(%x)\n", deviceType)); break; } phy->phy_type |= PORT_TYPE_SAS; diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c index 7f9c83a76390..3b2c98fba834 100644 --- a/drivers/scsi/pm8001/pm8001_sas.c +++ b/drivers/scsi/pm8001/pm8001_sas.c @@ -600,7 +600,7 @@ static void pm8001_free_dev(struct pm8001_device *pm8001_dev) * by the command "OPC_INB_REG_DEV", after that the HBA will assign a * device ID(according to device's sas address) and returned it to LLDD. From * now on, we communicate with HBA FW with the device ID which HBA assigned - * rather than sas address. it is the neccessary step for our HBA but it is + * rather than sas address. it is the necessary step for our HBA but it is * the optional for other HBA driver. */ static int pm8001_dev_found_notify(struct domain_device *dev) diff --git a/drivers/scsi/pmcraid.h b/drivers/scsi/pmcraid.h index 92f89d50850c..b8ad07c3449e 100644 --- a/drivers/scsi/pmcraid.h +++ b/drivers/scsi/pmcraid.h @@ -938,7 +938,7 @@ static struct pmcraid_ioasc_error pmcraid_ioasc_error_table[] = { /* * pmcraid_ioctl_header - definition of header structure that preceeds all the - * buffers given as ioctl arguements. + * buffers given as ioctl arguments. * * .signature : always ASCII string, "PMCRAID" * .reserved : not used diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 1dd4d8407694..83881dfb33c0 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -2111,7 +2111,7 @@ static int sd_revalidate_disk(struct gendisk *disk) * which is followed by sdaaa. * * This is basically 26 base counting with one extra 'nil' entry - * at the beggining from the second digit on and can be + * at the beginning from the second digit on and can be * determined using similar method as 26 base conversion with the * index shifted -1 after each digit is computed. * diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c index 52e3df113ec0..03c010af966b 100644 --- a/drivers/serial/samsung.c +++ b/drivers/serial/samsung.c @@ -1271,7 +1271,7 @@ s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon) unsigned long ufstat, utrstat; if (ufcon & S3C2410_UFCON_FIFOMODE) { - /* fifo mode - check ammount of data in fifo registers... */ + /* fifo mode - check amount of data in fifo registers... */ ufstat = rd_regl(port, S3C2410_UFSTAT); return (ufstat & info->tx_fifofull) ? 0 : 1; diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c index c010733877ae..1fabede9e061 100644 --- a/drivers/spi/spi_s3c24xx.c +++ b/drivers/spi/spi_s3c24xx.c @@ -275,7 +275,7 @@ static inline u32 ack_bit(unsigned int irq) * Claim the FIQ handler (only one can be active at any one time) and * then setup the correct transfer code for this transfer. * - * This call updates all the necessary state information if sucessful, + * This call updates all the necessary state information if successful, * so the caller does not need to do anything more than start the transfer * as normal, since the IRQ will have been re-routed to the FIQ handler. */ diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c index 66913811af5e..a883f9dd3f8a 100644 --- a/drivers/usb/musb/davinci.c +++ b/drivers/usb/musb/davinci.c @@ -274,7 +274,7 @@ static irqreturn_t davinci_interrupt(int irq, void *__hci) /* NOTE: DaVinci shadows the Mentor IRQs. Don't manage them through * the Mentor registers (except for setup), use the TI ones and EOI. * - * Docs describe irq "vector" registers asociated with the CPPI and + * Docs describe irq "vector" registers associated with the CPPI and * USB EOI registers. These hold a bitmask corresponding to the * current IRQ, not an irq handler address. Would using those bits * resolve some of the races observed in this dispatch code?? diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h index 292894a2c247..8d8062b10e2f 100644 --- a/drivers/usb/musb/musb_regs.h +++ b/drivers/usb/musb/musb_regs.h @@ -491,7 +491,7 @@ static inline u8 musb_read_txhubport(void __iomem *mbase, u8 epnum) #define MUSB_FLAT_OFFSET(_epnum, _offset) \ (USB_OFFSET(USB_EP_NI0_TXMAXP) + (0x40 * (_epnum)) + (_offset)) -/* Not implemented - HW has seperate Tx/Rx FIFO */ +/* Not implemented - HW has separate Tx/Rx FIFO */ #define MUSB_TXCSR_MODE 0x0000 static inline void musb_write_txfifosz(void __iomem *mbase, u8 c_size) diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index baf74b44e6ed..e23c77925e7a 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -152,7 +152,7 @@ struct cypress_private { int isthrottled; /* if throttled, discard reads */ wait_queue_head_t delta_msr_wait; /* used for TIOCMIWAIT */ char prev_status, diff_status; /* used for TIOCMIWAIT */ - /* we pass a pointer to this as the arguement sent to + /* we pass a pointer to this as the argument sent to cypress_set_termios old_termios */ struct ktermios tmp_termios; /* stores the old termios settings */ }; diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c index f37476e22684..701452ae9197 100644 --- a/drivers/usb/serial/opticon.c +++ b/drivers/usb/serial/opticon.c @@ -115,7 +115,7 @@ static void opticon_bulk_callback(struct urb *urb) } } else { dev_dbg(&priv->udev->dev, - "Improper ammount of data received from the device, " + "Improper amount of data received from the device, " "%d bytes", urb->actual_length); } diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c index 72398888858f..ee190cc1757c 100644 --- a/drivers/usb/serial/symbolserial.c +++ b/drivers/usb/serial/symbolserial.c @@ -94,7 +94,7 @@ static void symbol_int_callback(struct urb *urb) } } else { dev_dbg(&priv->udev->dev, - "Improper ammount of data received from the device, " + "Improper amount of data received from the device, " "%d bytes", urb->actual_length); } diff --git a/drivers/usb/wusbcore/wusbhc.h b/drivers/usb/wusbcore/wusbhc.h index fd2fd4e277e1..759cda55f7c3 100644 --- a/drivers/usb/wusbcore/wusbhc.h +++ b/drivers/usb/wusbcore/wusbhc.h @@ -198,7 +198,7 @@ struct wusb_port { * ports) this HC will take. Read-only. * * @port Array of port status for each fake root port. Guaranteed to - * always be the same lenght during device existence + * always be the same length during device existence * [this allows for some unlocked but referenced reading]. * * @mmcies_max Max number of Information Elements this HC can send diff --git a/drivers/uwb/i1480/i1480-est.c b/drivers/uwb/i1480/i1480-est.c index 7bf8c6febae7..f2eb4d8b76c9 100644 --- a/drivers/uwb/i1480/i1480-est.c +++ b/drivers/uwb/i1480/i1480-est.c @@ -54,7 +54,7 @@ static struct uwb_est_entry i1480_est_fd01[] = { .size = sizeof(struct i1480_rceb) + 2 }, }; -static int i1480_est_init(void) +static int __init i1480_est_init(void) { int result = uwb_est_register(i1480_CET_VS1, 0x00, 0x8086, 0x0c3b, i1480_est_fd00, @@ -73,7 +73,7 @@ static int i1480_est_init(void) } module_init(i1480_est_init); -static void i1480_est_exit(void) +static void __exit i1480_est_exit(void) { uwb_est_unregister(i1480_CET_VS1, 0x00, 0x8086, 0x0c3b, i1480_est_fd00, ARRAY_SIZE(i1480_est_fd00)); diff --git a/drivers/uwb/uwbd.c b/drivers/uwb/uwbd.c index 5a777d8624da..6210fe1fd1bb 100644 --- a/drivers/uwb/uwbd.c +++ b/drivers/uwb/uwbd.c @@ -43,7 +43,7 @@ * * EVENTS * - * Events have a type, a subtype, a lenght, some other stuff and the + * Events have a type, a subtype, a length, some other stuff and the * data blob, which depends on the event. The header is 'struct * uwb_event'; for payloads, see 'struct uwbd_evt_*'. * diff --git a/drivers/video/68328fb.c b/drivers/video/68328fb.c index 0b17824b0eb5..2110556f76b3 100644 --- a/drivers/video/68328fb.c +++ b/drivers/video/68328fb.c @@ -308,7 +308,7 @@ static int mc68x328fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, * Pseudocolor: * uses offset = 0 && length = RAMDAC register width. * var->{color}.offset is 0 - * var->{color}.length contains widht of DAC + * var->{color}.length contains width of DAC * cmap is not used * RAMDAC[X] is programmed to (red, green, blue) * Truecolor: diff --git a/drivers/video/mbx/mbxfb.c b/drivers/video/mbx/mbxfb.c index 01f77bcc68f9..afea9abbd678 100644 --- a/drivers/video/mbx/mbxfb.c +++ b/drivers/video/mbx/mbxfb.c @@ -693,7 +693,7 @@ static void __devinit setup_memc(struct fb_info *fbi) unsigned long tmp; int i; - /* FIXME: use platfrom specific parameters */ + /* FIXME: use platform specific parameters */ /* setup SDRAM controller */ write_reg_dly((LMCFG_LMC_DS | LMCFG_LMC_TS | LMCFG_LMD_TS | LMCFG_LMA_TS), diff --git a/drivers/video/omap/lcdc.c b/drivers/video/omap/lcdc.c index a33483910dc8..9557f963662e 100644 --- a/drivers/video/omap/lcdc.c +++ b/drivers/video/omap/lcdc.c @@ -389,7 +389,7 @@ static int omap_lcdc_enable_plane(int plane, int enable) /* * Configure the LCD DMA for a palette load operation and do the palette * downloading synchronously. We don't use the frame+palette load mode of - * the controller, since the palette can always be downloaded seperately. + * the controller, since the palette can always be downloaded separately. */ static void load_palette(void) { diff --git a/drivers/video/pm2fb.c b/drivers/video/pm2fb.c index 36436ee6c1a4..27f93aab6ddc 100644 --- a/drivers/video/pm2fb.c +++ b/drivers/video/pm2fb.c @@ -896,7 +896,7 @@ static int pm2fb_setcolreg(unsigned regno, unsigned red, unsigned green, * Pseudocolor: * uses offset = 0 && length = DAC register width. * var->{color}.offset is 0 - * var->{color}.length contains widht of DAC + * var->{color}.length contains width of DAC * cmap is not used * DAC[X] is programmed to (red, green, blue) * Truecolor: diff --git a/drivers/video/s1d13xxxfb.c b/drivers/video/s1d13xxxfb.c index 0deb0a8867b7..7b63429f1a7c 100644 --- a/drivers/video/s1d13xxxfb.c +++ b/drivers/video/s1d13xxxfb.c @@ -517,12 +517,12 @@ s1d13xxxfb_bitblt_copyarea(struct fb_info *info, const struct fb_copyarea *area) src = (sy * stride) + (bpp * sx); } - /* set source adress */ + /* set source address */ s1d13xxxfb_writereg(info->par, S1DREG_BBLT_SRC_START0, (src & 0xff)); s1d13xxxfb_writereg(info->par, S1DREG_BBLT_SRC_START1, (src >> 8) & 0x00ff); s1d13xxxfb_writereg(info->par, S1DREG_BBLT_SRC_START2, (src >> 16) & 0x00ff); - /* set destination adress */ + /* set destination address */ s1d13xxxfb_writereg(info->par, S1DREG_BBLT_DST_START0, (dst & 0xff)); s1d13xxxfb_writereg(info->par, S1DREG_BBLT_DST_START1, (dst >> 8) & 0x00ff); s1d13xxxfb_writereg(info->par, S1DREG_BBLT_DST_START2, (dst >> 16) & 0x00ff); diff --git a/drivers/video/sm501fb.c b/drivers/video/sm501fb.c index 35370d0ecf03..b7dc1800efa9 100644 --- a/drivers/video/sm501fb.c +++ b/drivers/video/sm501fb.c @@ -411,7 +411,7 @@ static int sm501fb_set_par_common(struct fb_info *info, struct sm501fb_par *par = info->par; struct sm501fb_info *fbi = par->info; unsigned long pixclock; /* pixelclock in Hz */ - unsigned long sm501pixclock; /* pixelclock the 501 can achive in Hz */ + unsigned long sm501pixclock; /* pixelclock the 501 can achieve in Hz */ unsigned int mem_type; unsigned int clock_type; unsigned int head_addr; diff --git a/drivers/video/sstfb.c b/drivers/video/sstfb.c index 609d0a521ca2..79840f11fecb 100644 --- a/drivers/video/sstfb.c +++ b/drivers/video/sstfb.c @@ -1102,7 +1102,7 @@ static void sst_set_vidmod_ics(struct fb_info *info, const int bpp) * detect dac type * prerequisite : write to FbiInitx enabled, video and fbi and pci fifo reset, * dram refresh disabled, FbiInit remaped. - * TODO: mmh.. maybe i shoud put the "prerequisite" in the func ... + * TODO: mmh.. maybe i should put the "prerequisite" in the func ... */ diff --git a/drivers/w1/w1.c b/drivers/w1/w1.c index acc7e3b7fe17..ad5897dc4495 100644 --- a/drivers/w1/w1.c +++ b/drivers/w1/w1.c @@ -986,7 +986,7 @@ int w1_process(void *data) return 0; } -static int w1_init(void) +static int __init w1_init(void) { int retval; @@ -1034,7 +1034,7 @@ err_out_exit_init: return retval; } -static void w1_fini(void) +static void __exit w1_fini(void) { struct w1_master *dev; diff --git a/drivers/zorro/zorro.ids b/drivers/zorro/zorro.ids index 0c0f99e2dd62..de24e3decedd 100644 --- a/drivers/zorro/zorro.ids +++ b/drivers/zorro/zorro.ids @@ -108,7 +108,7 @@ 0c00 500XP/SupraDrive WordSync [SCSI Host Adapter] 0d00 SupraDrive WordSync II [SCSI Host Adapter] 1000 2400zi+ [Modem] -0422 Computer Systems Assosiates +0422 Computer Systems Associates 1100 Magnum 40 [Accelerator and SCSI Host Adapter] 1500 12 Gauge [SCSI Host Adapter] 0439 Marc Michael Groth |