summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorFrancois Romieu <romieu@fr.zoreil.com>2008-05-11 14:51:00 +0200
committerFrancois Romieu <romieu@electric-eye.fr.zoreil.com>2008-06-29 15:08:28 +0200
commit865c652d6be9929927cabdc54b137b7541eb6612 (patch)
treec8ac0d480874385c9493b8b67360af6e1709b966 /drivers
parent1087f4f4af302e6e2fa40dd741f306444d90bece (diff)
r8169: remove non-napi code
It will almost unavoidably cause some breakage but it is long overdue. The driver identification string has been updated, a lost tabulation and some unused code have been removed. Otherwise the code paths should stay the same. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/net/Kconfig16
-rw-r--r--drivers/net/r8169.c139
2 files changed, 41 insertions, 114 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index d85b9d067597..84925915dce4 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2122,27 +2122,13 @@ config R8169
To compile this driver as a module, choose M here: the module
will be called r8169. This is recommended.
-config R8169_NAPI
- bool "Use Rx Polling (NAPI) (EXPERIMENTAL)"
- depends on R8169 && EXPERIMENTAL
- help
- NAPI is a new driver API designed to reduce CPU and interrupt load
- when the driver is receiving lots of packets from the card. It is
- still somewhat experimental and thus not yet enabled by default.
-
- If your estimated Rx load is 10kpps or more, or if the card will be
- deployed on potentially unfriendly networks (e.g. in a firewall),
- then say Y here.
-
- If in doubt, say N.
-
config R8169_VLAN
bool "VLAN support"
depends on R8169 && VLAN_8021Q
---help---
Say Y here for the r8169 driver to support the functions required
by the kernel 802.1Q code.
-
+
If in doubt, say Y.
config SB1250_MAC
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 9086e819d742..cfe8829ed31f 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -28,13 +28,7 @@
#include <asm/io.h>
#include <asm/irq.h>
-#ifdef CONFIG_R8169_NAPI
-#define NAPI_SUFFIX "-NAPI"
-#else
-#define NAPI_SUFFIX ""
-#endif
-
-#define RTL8169_VERSION "2.2LK" NAPI_SUFFIX
+#define RTL8169_VERSION "2.3LK-NAPI"
#define MODULENAME "r8169"
#define PFX MODULENAME ": "
@@ -57,16 +51,6 @@
#define TX_BUFFS_AVAIL(tp) \
(tp->dirty_tx + NUM_TX_DESC - tp->cur_tx - 1)
-#ifdef CONFIG_R8169_NAPI
-#define rtl8169_rx_skb netif_receive_skb
-#define rtl8169_rx_hwaccel_skb vlan_hwaccel_receive_skb
-#define rtl8169_rx_quota(count, quota) min(count, quota)
-#else
-#define rtl8169_rx_skb netif_rx
-#define rtl8169_rx_hwaccel_skb vlan_hwaccel_rx
-#define rtl8169_rx_quota(count, quota) count
-#endif
-
/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
static const int max_interrupt_work = 20;
@@ -394,9 +378,7 @@ struct rtl8169_private {
void __iomem *mmio_addr; /* memory map physical address */
struct pci_dev *pci_dev; /* Index of PCI device */
struct net_device *dev;
-#ifdef CONFIG_R8169_NAPI
struct napi_struct napi;
-#endif
spinlock_t lock; /* spin lock flag */
u32 msg_enable;
int chipset;
@@ -458,10 +440,7 @@ static int rtl8169_rx_interrupt(struct net_device *, struct rtl8169_private *,
static int rtl8169_change_mtu(struct net_device *dev, int new_mtu);
static void rtl8169_down(struct net_device *dev);
static void rtl8169_rx_clear(struct rtl8169_private *tp);
-
-#ifdef CONFIG_R8169_NAPI
static int rtl8169_poll(struct napi_struct *napi, int budget);
-#endif
static const unsigned int rtl8169_rx_config =
(RX_FIFO_THRESH << RxCfgFIFOShift) | (RX_DMA_BURST << RxCfgDMAShift);
@@ -843,10 +822,11 @@ static int rtl8169_rx_vlan_skb(struct rtl8169_private *tp, struct RxDesc *desc,
struct sk_buff *skb)
{
u32 opts2 = le32_to_cpu(desc->opts2);
+ struct vlan_group *vlgrp = tp->vlgrp;
int ret;
- if (tp->vlgrp && (opts2 & RxVlanTag)) {
- rtl8169_rx_hwaccel_skb(skb, tp->vlgrp, swab16(opts2 & 0xffff));
+ if (vlgrp && (opts2 & RxVlanTag)) {
+ vlan_hwaccel_receive_skb(skb, vlgrp, swab16(opts2 & 0xffff));
ret = 0;
} else
ret = -1;
@@ -1764,9 +1744,7 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
dev->change_mtu = rtl8169_change_mtu;
dev->set_mac_address = rtl_set_mac_address;
-#ifdef CONFIG_R8169_NAPI
netif_napi_add(dev, &tp->napi, rtl8169_poll, R8169_NAPI_WEIGHT);
-#endif
#ifdef CONFIG_R8169_VLAN
dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
@@ -1887,9 +1865,7 @@ static int rtl8169_open(struct net_device *dev)
if (retval < 0)
goto err_release_ring_2;
-#ifdef CONFIG_R8169_NAPI
napi_enable(&tp->napi);
-#endif
rtl_hw_start(dev);
@@ -2197,9 +2173,7 @@ static int rtl8169_change_mtu(struct net_device *dev, int new_mtu)
if (ret < 0)
goto out;
-#ifdef CONFIG_R8169_NAPI
napi_enable(&tp->napi);
-#endif
rtl_hw_start(dev);
@@ -2391,17 +2365,13 @@ static void rtl8169_wait_for_quiescence(struct net_device *dev)
synchronize_irq(dev->irq);
/* Wait for any pending NAPI task to complete */
-#ifdef CONFIG_R8169_NAPI
napi_disable(&tp->napi);
-#endif
rtl8169_irq_mask_and_ack(ioaddr);
-#ifdef CONFIG_R8169_NAPI
tp->intr_mask = 0xffff;
RTL_W16(IntrMask, tp->intr_event);
napi_enable(&tp->napi);
-#endif
}
static void rtl8169_reinit_task(struct work_struct *work)
@@ -2767,7 +2737,7 @@ static int rtl8169_rx_interrupt(struct net_device *dev,
cur_rx = tp->cur_rx;
rx_left = NUM_RX_DESC + tp->dirty_rx - cur_rx;
- rx_left = rtl8169_rx_quota(rx_left, budget);
+ rx_left = min(rx_left, budget);
for (; rx_left > 0; rx_left--, cur_rx++) {
unsigned int entry = cur_rx % NUM_RX_DESC;
@@ -2829,7 +2799,7 @@ static int rtl8169_rx_interrupt(struct net_device *dev,
skb->protocol = eth_type_trans(skb, dev);
if (rtl8169_rx_vlan_skb(tp, desc, skb) < 0)
- rtl8169_rx_skb(skb);
+ netif_receive_skb(skb);
dev->last_rx = jiffies;
dev->stats.rx_bytes += pkt_size;
@@ -2869,87 +2839,61 @@ static irqreturn_t rtl8169_interrupt(int irq, void *dev_instance)
{
struct net_device *dev = dev_instance;
struct rtl8169_private *tp = netdev_priv(dev);
- int boguscnt = max_interrupt_work;
void __iomem *ioaddr = tp->mmio_addr;
- int status;
int handled = 0;
+ int status;
- do {
- status = RTL_R16(IntrStatus);
+ status = RTL_R16(IntrStatus);
- /* hotplug/major error/no more work/shared irq */
- if ((status == 0xFFFF) || !status)
- break;
+ /* hotplug/major error/no more work/shared irq */
+ if ((status == 0xffff) || !status)
+ goto out;
- handled = 1;
+ handled = 1;
- if (unlikely(!netif_running(dev))) {
- rtl8169_asic_down(ioaddr);
- goto out;
- }
+ if (unlikely(!netif_running(dev))) {
+ rtl8169_asic_down(ioaddr);
+ goto out;
+ }
- status &= tp->intr_mask;
- RTL_W16(IntrStatus,
- (status & RxFIFOOver) ? (status | RxOverflow) : status);
+ status &= tp->intr_mask;
+ RTL_W16(IntrStatus,
+ (status & RxFIFOOver) ? (status | RxOverflow) : status);
- if (!(status & tp->intr_event))
- break;
+ if (!(status & tp->intr_event))
+ goto out;
- /* Work around for rx fifo overflow */
- if (unlikely(status & RxFIFOOver) &&
- (tp->mac_version == RTL_GIGA_MAC_VER_11)) {
- netif_stop_queue(dev);
- rtl8169_tx_timeout(dev);
- break;
- }
+ /* Work around for rx fifo overflow */
+ if (unlikely(status & RxFIFOOver) &&
+ (tp->mac_version == RTL_GIGA_MAC_VER_11)) {
+ netif_stop_queue(dev);
+ rtl8169_tx_timeout(dev);
+ goto out;
+ }
- if (unlikely(status & SYSErr)) {
- rtl8169_pcierr_interrupt(dev);
- break;
- }
+ if (unlikely(status & SYSErr)) {
+ rtl8169_pcierr_interrupt(dev);
+ goto out;
+ }
- if (status & LinkChg)
- rtl8169_check_link_status(dev, tp, ioaddr);
+ if (status & LinkChg)
+ rtl8169_check_link_status(dev, tp, ioaddr);
-#ifdef CONFIG_R8169_NAPI
- if (status & tp->napi_event) {
- RTL_W16(IntrMask, tp->intr_event & ~tp->napi_event);
- tp->intr_mask = ~tp->napi_event;
+ if (status & tp->napi_event) {
+ RTL_W16(IntrMask, tp->intr_event & ~tp->napi_event);
+ tp->intr_mask = ~tp->napi_event;
if (likely(netif_rx_schedule_prep(dev, &tp->napi)))
__netif_rx_schedule(dev, &tp->napi);
- else if (netif_msg_intr(tp)) {
- printk(KERN_INFO "%s: interrupt %04x in poll\n",
- dev->name, status);
- }
- }
- break;
-#else
- /* Rx interrupt */
- if (status & (RxOK | RxOverflow | RxFIFOOver))
- rtl8169_rx_interrupt(dev, tp, ioaddr, ~(u32)0);
-
- /* Tx interrupt */
- if (status & (TxOK | TxErr))
- rtl8169_tx_interrupt(dev, tp, ioaddr);
-#endif
-
- boguscnt--;
- } while (boguscnt > 0);
-
- if (boguscnt <= 0) {
- if (netif_msg_intr(tp) && net_ratelimit() ) {
- printk(KERN_WARNING
- "%s: Too much work at interrupt!\n", dev->name);
+ else if (netif_msg_intr(tp)) {
+ printk(KERN_INFO "%s: interrupt %04x in poll\n",
+ dev->name, status);
}
- /* Clear all interrupt sources. */
- RTL_W16(IntrStatus, 0xffff);
}
out:
return IRQ_RETVAL(handled);
}
-#ifdef CONFIG_R8169_NAPI
static int rtl8169_poll(struct napi_struct *napi, int budget)
{
struct rtl8169_private *tp = container_of(napi, struct rtl8169_private, napi);
@@ -2975,7 +2919,6 @@ static int rtl8169_poll(struct napi_struct *napi, int budget)
return work_done;
}
-#endif
static void rtl8169_down(struct net_device *dev)
{
@@ -2987,9 +2930,7 @@ static void rtl8169_down(struct net_device *dev)
netif_stop_queue(dev);
-#ifdef CONFIG_R8169_NAPI
napi_disable(&tp->napi);
-#endif
core_down:
spin_lock_irq(&tp->lock);