diff options
author | David Howells <dhowells@redhat.com> | 2008-02-08 04:19:28 -0800 |
---|---|---|
committer | Linus Torvalds <torvalds@woody.linux-foundation.org> | 2008-02-08 09:22:30 -0800 |
commit | 7fa3031500ec9b0a7460c8c23751799006ffee74 (patch) | |
tree | 2a7e9202b35a39dc8217e95825263c0629e67e35 /fs/binfmt_elf.c | |
parent | b0b933c08bd5fd053bbba8ba6387f543be03d49f (diff) |
aout: suppress A.OUT library support if !CONFIG_ARCH_SUPPORTS_AOUT
Suppress A.OUT library support if CONFIG_ARCH_SUPPORTS_AOUT is not set.
Not all architectures support the A.OUT binfmt, so the ELF binfmt should not
be permitted to go looking for A.OUT libraries to load in such a case. Not
only that, but under such conditions A.OUT core dumps are not produced either.
To make this work, this patch also does the following:
(1) Makes the existence of the contents of linux/a.out.h contingent on
CONFIG_ARCH_SUPPORTS_AOUT.
(2) Renames dump_thread() to aout_dump_thread() as it's only called by A.OUT
core dumping code.
(3) Moves aout_dump_thread() into asm/a.out-core.h and makes it inline. This
is then included only where needed. This means that this bit of arch
code will be stored in the appropriate A.OUT binfmt module rather than
the core kernel.
(4) Drops A.OUT support for Blackfin (according to Mike Frysinger it's not
needed) and FRV.
This patch depends on the previous patch to move STACK_TOP[_MAX] out of
asm/a.out.h and into asm/processor.h as they're required whether or not A.OUT
format is available.
[jdike@addtoit.com: uml: re-remove accidentally restored code]
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'fs/binfmt_elf.c')
-rw-r--r-- | fs/binfmt_elf.c | 34 |
1 files changed, 26 insertions, 8 deletions
diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c index 111771d38e6e..a93b1170551b 100644 --- a/fs/binfmt_elf.c +++ b/fs/binfmt_elf.c @@ -513,6 +513,7 @@ out: return error; } +#ifdef CONFIG_ARCH_SUPPORTS_AOUT static unsigned long load_aout_interp(struct exec *interp_ex, struct file *interpreter) { @@ -558,6 +559,14 @@ static unsigned long load_aout_interp(struct exec *interp_ex, out: return elf_entry; } +#else +/* dummy extern - the function should never be called if !CONFIG_AOUT_BINFMT */ +static inline unsigned long load_aout_interp(struct exec *interp_ex, + struct file *interpreter) +{ + return -ELIBACC; +} +#endif /* * These are the functions used to load ELF style executables and shared @@ -565,9 +574,15 @@ out: */ #define INTERPRETER_NONE 0 -#define INTERPRETER_AOUT 1 #define INTERPRETER_ELF 2 +#ifdef CONFIG_ARCH_SUPPORTS_AOUT +#define INTERPRETER_AOUT 1 +#define IS_AOUT_INTERP(x) ((x) == INTERPRETER_AOUT) +#else +#define IS_AOUT_INTERP(x) (0) +#endif + #ifndef STACK_RND_MASK #define STACK_RND_MASK (0x7ff >> (PAGE_SHIFT - 12)) /* 8MB of VA */ #endif @@ -775,6 +790,7 @@ static int load_elf_binary(struct linux_binprm *bprm, struct pt_regs *regs) /* Some simple consistency checks for the interpreter */ if (elf_interpreter) { static int warn; +#ifdef CONFIG_ARCH_SUPPORTS_AOUT interpreter_type = INTERPRETER_ELF | INTERPRETER_AOUT; /* Now figure out which format our binary is */ @@ -782,11 +798,13 @@ static int load_elf_binary(struct linux_binprm *bprm, struct pt_regs *regs) (N_MAGIC(loc->interp_ex) != ZMAGIC) && (N_MAGIC(loc->interp_ex) != QMAGIC)) interpreter_type = INTERPRETER_ELF; - +#else + interpreter_type = INTERPRETER_ELF; +#endif if (memcmp(loc->interp_elf_ex.e_ident, ELFMAG, SELFMAG) != 0) interpreter_type &= ~INTERPRETER_ELF; - if (interpreter_type == INTERPRETER_AOUT && warn < 10) { + if (IS_AOUT_INTERP(interpreter_type) && warn < 10) { printk(KERN_WARNING "a.out ELF interpreter %s is " "deprecated and will not be supported " "after Linux 2.6.25\n", elf_interpreter); @@ -815,7 +833,7 @@ static int load_elf_binary(struct linux_binprm *bprm, struct pt_regs *regs) /* OK, we are done with that, now set up the arg stuff, and then start this sucker up */ - if ((!bprm->sh_bang) && (interpreter_type == INTERPRETER_AOUT)) { + if (IS_AOUT_INTERP(interpreter_type) && !bprm->sh_bang) { char *passed_p = passed_fileno; sprintf(passed_fileno, "%d", elf_exec_fileno); @@ -1004,7 +1022,7 @@ static int load_elf_binary(struct linux_binprm *bprm, struct pt_regs *regs) } if (elf_interpreter) { - if (interpreter_type == INTERPRETER_AOUT) { + if (IS_AOUT_INTERP(interpreter_type)) { elf_entry = load_aout_interp(&loc->interp_ex, interpreter); } else { @@ -1045,7 +1063,7 @@ static int load_elf_binary(struct linux_binprm *bprm, struct pt_regs *regs) kfree(elf_phdata); - if (interpreter_type != INTERPRETER_AOUT) + if (!IS_AOUT_INTERP(interpreter_type)) sys_close(elf_exec_fileno); set_binfmt(&elf_format); @@ -1061,14 +1079,14 @@ static int load_elf_binary(struct linux_binprm *bprm, struct pt_regs *regs) compute_creds(bprm); current->flags &= ~PF_FORKNOEXEC; retval = create_elf_tables(bprm, &loc->elf_ex, - (interpreter_type == INTERPRETER_AOUT), + IS_AOUT_INTERP(interpreter_type), load_addr, interp_load_addr); if (retval < 0) { send_sig(SIGKILL, current, 0); goto out; } /* N.B. passed_fileno might not be initialized? */ - if (interpreter_type == INTERPRETER_AOUT) + if (IS_AOUT_INTERP(interpreter_type)) current->mm->arg_start += strlen(passed_fileno) + 1; current->mm->end_code = end_code; current->mm->start_code = start_code; |