[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach

This just leaves include/asm-arm/plat-* to deal with.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 files changed, 0 insertions, 583 deletions

diff --git a/include/asm-arm/arch-aaec2000/aaec2000.h b/include/asm-arm/arch-aaec2000/aaec2000.h
deleted file mode 100644
index a6d1ee0980f2..000000000000
--- a/include/asm-arm/arch-aaec2000/aaec2000.h
+++ /dev/null
@@ -1,207 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-aaec2000/aaec2000.h
- *
- *  AAEC-2000 registers definition
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_AAEC2000_H
-#define __ASM_ARCH_AAEC2000_H
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#error You must include hardware.h not this file
-#endif /* __ASM_ARCH_HARDWARE_H */
-
-/* Chip selects */
-#define AAEC_CS0	0x00000000
-#define AAEC_CS1	0x10000000
-#define AAEC_CS2	0x20000000
-#define AAEC_CS3	0x30000000
-
-/* Flash */
-#define AAEC_FLASH_BASE	AAEC_CS0
-#define AAEC_FLASH_SIZE	SZ_64M
-
-/* Interrupt controller */
-#define IRQ_BASE	__REG(0x80000500)
-#define IRQ_INTSR	__REG(0x80000500)	/* Int Status Register */
-#define IRQ_INTRSR	__REG(0x80000504)	/* Int Raw (unmasked) Status */
-#define IRQ_INTENS	__REG(0x80000508)	/* Int Enable Set */
-#define IRQ_INTENC	__REG(0x8000050c)	/* Int Enable Clear */
-
-/* UART 1 */
-#define UART1_BASE	__REG(0x80000600)
-#define UART1_DR	__REG(0x80000600) /* Data/FIFO Register */
-#define UART1_LCR	__REG(0x80000604) /* Link Control Register */
-#define UART1_BRCR	__REG(0x80000608) /* Baud Rate Control Register */
-#define UART1_CR	__REG(0x8000060c) /* Control Register */
-#define UART1_SR	__REG(0x80000610) /* Status Register */
-#define UART1_INT	__REG(0x80000614) /* Interrupt Status Register */
-#define UART1_INTM	__REG(0x80000618) /* Interrupt Mask Register */
-#define UART1_INTRES	__REG(0x8000061c) /* Int Result (masked status) Register */
-
-/* UART 2 */
-#define UART2_BASE	__REG(0x80000700)
-#define UART2_DR	__REG(0x80000700) /* Data/FIFO Register */
-#define UART2_LCR	__REG(0x80000704) /* Link Control Register */
-#define UART2_BRCR	__REG(0x80000708) /* Baud Rate Control Register */
-#define UART2_CR	__REG(0x8000070c) /* Control Register */
-#define UART2_SR	__REG(0x80000710) /* Status Register */
-#define UART2_INT	__REG(0x80000714) /* Interrupt Status Register */
-#define UART2_INTM	__REG(0x80000718) /* Interrupt Mask Register */
-#define UART2_INTRES	__REG(0x8000071c) /* Int Result (masked status) Register */
-
-/* UART 3 */
-#define UART3_BASE	__REG(0x80000800)
-#define UART3_DR	__REG(0x80000800) /* Data/FIFO Register */
-#define UART3_LCR	__REG(0x80000804) /* Link Control Register */
-#define UART3_BRCR	__REG(0x80000808) /* Baud Rate Control Register */
-#define UART3_CR	__REG(0x8000080c) /* Control Register */
-#define UART3_SR	__REG(0x80000810) /* Status Register */
-#define UART3_INT	__REG(0x80000814) /* Interrupt Status Register */
-#define UART3_INTM	__REG(0x80000818) /* Interrupt Mask Register */
-#define UART3_INTRES	__REG(0x8000081c) /* Int Result (masked status) Register */
-
-/* These are used in some places */
-#define _UART1_BASE __PREG(UART1_BASE)
-#define _UART2_BASE __PREG(UART2_BASE)
-#define _UART3_BASE __PREG(UART3_BASE)
-
-/* UART Registers Offsets */
-#define UART_DR		0x00
-#define UART_LCR	0x04
-#define UART_BRCR	0x08
-#define UART_CR		0x0c
-#define UART_SR		0x10
-#define UART_INT	0x14
-#define UART_INTM	0x18
-#define UART_INTRES	0x1c
-
-/* UART_LCR Bitmask */
-#define UART_LCR_BRK	(1 << 0) /* Send Break */
-#define UART_LCR_PEN	(1 << 1) /* Parity Enable */
-#define UART_LCR_EP	(1 << 2) /* Even/Odd Parity */
-#define UART_LCR_S2	(1 << 3) /* One/Two Stop bits */
-#define UART_LCR_FIFO	(1 << 4) /* FIFO Enable */
-#define UART_LCR_WL5	(0 << 5) /* Word Length - 5 bits */
-#define UART_LCR_WL6	(1 << 5) /* Word Length - 6 bits */
-#define UART_LCR_WL7	(1 << 6) /* Word Length - 7 bits */
-#define UART_LCR_WL8	(1 << 7) /* Word Length - 8 bits */
-
-/* UART_CR Bitmask */
-#define UART_CR_EN	(1 << 0) /* UART Enable */
-#define UART_CR_SIR	(1 << 1) /* IrDA SIR Enable */
-#define UART_CR_SIRLP	(1 << 2) /* Low Power IrDA Enable */
-#define UART_CR_RXP	(1 << 3) /* Receive Pin Polarity */
-#define UART_CR_TXP	(1 << 4) /* Transmit Pin Polarity */
-#define UART_CR_MXP	(1 << 5) /* Modem Pin Polarity */
-#define UART_CR_LOOP	(1 << 6) /* Loopback Mode */
-
-/* UART_SR Bitmask */
-#define UART_SR_CTS	(1 << 0) /* Clear To Send Status */
-#define UART_SR_DSR	(1 << 1) /* Data Set Ready Status */
-#define UART_SR_DCD	(1 << 2) /* Data Carrier Detect Status */
-#define UART_SR_TxBSY	(1 << 3) /* Transmitter Busy Status */
-#define UART_SR_RxFE	(1 << 4) /* Receive FIFO Empty Status */
-#define UART_SR_TxFF	(1 << 5) /* Transmit FIFO Full Status */
-#define UART_SR_RxFF	(1 << 6) /* Receive FIFO Full Status */
-#define UART_SR_TxFE	(1 << 7) /* Transmit FIFO Empty Status */
-
-/* UART_INT Bitmask */
-#define UART_INT_RIS	(1 << 0) /* Rx Interrupt */
-#define UART_INT_TIS	(1 << 1) /* Tx Interrupt */
-#define UART_INT_MIS	(1 << 2) /* Modem Interrupt */
-#define UART_INT_RTIS	(1 << 3) /* Receive Timeout Interrupt */
-
-/* Timer 1 */
-#define TIMER1_BASE	__REG(0x80000c00)
-#define TIMER1_LOAD	__REG(0x80000c00)	/* Timer 1 Load Register */
-#define TIMER1_VAL	__REG(0x80000c04)	/* Timer 1 Value Register */
-#define TIMER1_CTRL	__REG(0x80000c08)	/* Timer 1 Control Register */
-#define TIMER1_CLEAR	__REG(0x80000c0c)	/* Timer 1 Clear Register */
-
-/* Timer 2 */
-#define TIMER2_BASE	__REG(0x80000d00)
-#define TIMER2_LOAD	__REG(0x80000d00)	/* Timer 2 Load Register */
-#define TIMER2_VAL	__REG(0x80000d04)	/* Timer 2 Value Register */
-#define TIMER2_CTRL	__REG(0x80000d08)	/* Timer 2 Control Register */
-#define TIMER2_CLEAR	__REG(0x80000d0c)	/* Timer 2 Clear Register */
-
-/* Timer 3 */
-#define TIMER3_BASE	__REG(0x80000e00)
-#define TIMER3_LOAD	__REG(0x80000e00)	/* Timer 3 Load Register */
-#define TIMER3_VAL	__REG(0x80000e04)	/* Timer 3 Value Register */
-#define TIMER3_CTRL	__REG(0x80000e08)	/* Timer 3 Control Register */
-#define TIMER3_CLEAR	__REG(0x80000e0c)	/* Timer 3 Clear Register */
-
-/* Timer Control register bits */
-#define TIMER_CTRL_ENABLE	(1 << 7) /* Enable (Start Timer) */
-#define TIMER_CTRL_PERIODIC	(1 << 6) /* Periodic Running Mode */
-#define TIMER_CTRL_FREE_RUNNING (0 << 6) /* Normal Running Mode */
-#define TIMER_CTRL_CLKSEL_508K	(1 << 3) /* 508KHz Clock select (Timer 1, 2) */
-#define TIMER_CTRL_CLKSEL_2K	(0 << 3) /* 2KHz Clock Select (Timer 1, 2) */
-
-/* Power and State Control */
-#define POWER_BASE	__REG(0x80000400)
-#define POWER_PWRSR	__REG(0x80000400) /* Power Status Register */
-#define POWER_PWRCNT	__REG(0x80000404) /* Power/Clock control */
-#define POWER_HALT	__REG(0x80000408) /* Power Idle Mode */
-#define POWER_STDBY	__REG(0x8000040c) /* Power Standby Mode */
-#define POWER_BLEOI	__REG(0x80000410) /* Battery Low End of Interrupt */
-#define POWER_MCEOI	__REG(0x80000414) /* Media Changed EoI */
-#define POWER_TEOI	__REG(0x80000418) /* Tick EoI */
-#define POWER_STFCLR	__REG(0x8000041c) /* NbFlg, RSTFlg, PFFlg, CLDFlg Clear */
-#define POWER_CLKSET	__REG(0x80000420) /* Clock Speed Control */
-
-/* GPIO Registers */
-#define AAEC_GPIO_PHYS	0x80000e00
-
-#define AAEC_GPIO_PADR		__REG(AAEC_GPIO_PHYS + 0x00)
-#define AAEC_GPIO_PBDR		__REG(AAEC_GPIO_PHYS + 0x04)
-#define AAEC_GPIO_PCDR		__REG(AAEC_GPIO_PHYS + 0x08)
-#define AAEC_GPIO_PDDR		__REG(AAEC_GPIO_PHYS + 0x0c)
-#define AAEC_GPIO_PADDR		__REG(AAEC_GPIO_PHYS + 0x10)
-#define AAEC_GPIO_PBDDR		__REG(AAEC_GPIO_PHYS + 0x14)
-#define AAEC_GPIO_PCDDR		__REG(AAEC_GPIO_PHYS + 0x18)
-#define AAEC_GPIO_PDDDR		__REG(AAEC_GPIO_PHYS + 0x1c)
-#define AAEC_GPIO_PEDR		__REG(AAEC_GPIO_PHYS + 0x20)
-#define AAEC_GPIO_PEDDR		__REG(AAEC_GPIO_PHYS + 0x24)
-#define AAEC_GPIO_KSCAN		__REG(AAEC_GPIO_PHYS + 0x28)
-#define AAEC_GPIO_PINMUX	__REG(AAEC_GPIO_PHYS + 0x2c)
-#define AAEC_GPIO_PFDR		__REG(AAEC_GPIO_PHYS + 0x30)
-#define AAEC_GPIO_PFDDR		__REG(AAEC_GPIO_PHYS + 0x34)
-#define AAEC_GPIO_PGDR		__REG(AAEC_GPIO_PHYS + 0x38)
-#define AAEC_GPIO_PGDDR		__REG(AAEC_GPIO_PHYS + 0x3c)
-#define AAEC_GPIO_PHDR		__REG(AAEC_GPIO_PHYS + 0x40)
-#define AAEC_GPIO_PHDDR		__REG(AAEC_GPIO_PHYS + 0x44)
-#define AAEC_GPIO_RAZ		__REG(AAEC_GPIO_PHYS + 0x48)
-#define AAEC_GPIO_INTTYPE1	__REG(AAEC_GPIO_PHYS + 0x4c)
-#define AAEC_GPIO_INTTYPE2	__REG(AAEC_GPIO_PHYS + 0x50)
-#define AAEC_GPIO_FEOI		__REG(AAEC_GPIO_PHYS + 0x54)
-#define AAEC_GPIO_INTEN		__REG(AAEC_GPIO_PHYS + 0x58)
-#define AAEC_GPIO_INTSTATUS	__REG(AAEC_GPIO_PHYS + 0x5c)
-#define AAEC_GPIO_RAWINTSTATUS	__REG(AAEC_GPIO_PHYS + 0x60)
-#define AAEC_GPIO_DB		__REG(AAEC_GPIO_PHYS + 0x64)
-#define AAEC_GPIO_PAPINDR	__REG(AAEC_GPIO_PHYS + 0x68)
-#define AAEC_GPIO_PBPINDR	__REG(AAEC_GPIO_PHYS + 0x6c)
-#define AAEC_GPIO_PCPINDR	__REG(AAEC_GPIO_PHYS + 0x70)
-#define AAEC_GPIO_PDPINDR	__REG(AAEC_GPIO_PHYS + 0x74)
-#define AAEC_GPIO_PEPINDR	__REG(AAEC_GPIO_PHYS + 0x78)
-#define AAEC_GPIO_PFPINDR	__REG(AAEC_GPIO_PHYS + 0x7c)
-#define AAEC_GPIO_PGPINDR	__REG(AAEC_GPIO_PHYS + 0x80)
-#define AAEC_GPIO_PHPINDR	__REG(AAEC_GPIO_PHYS + 0x84)
-
-#define AAEC_GPIO_PINMUX_PE0CON		(1 << 0)
-#define AAEC_GPIO_PINMUX_PD0CON		(1 << 1)
-#define AAEC_GPIO_PINMUX_CODECON	(1 << 2)
-#define AAEC_GPIO_PINMUX_UART3CON	(1 << 3)
-
-/* LCD Controller */
-#define AAEC_CLCD_PHYS	0x80003000
-
-#endif /* __ARM_ARCH_AAEC2000_H */
diff --git a/include/asm-arm/arch-aaec2000/aaed2000.h b/include/asm-arm/arch-aaec2000/aaed2000.h
deleted file mode 100644
index bc76d2badb91..000000000000
--- a/include/asm-arm/arch-aaec2000/aaed2000.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-aaec2000/aaed2000.h
- *
- *  AAED-2000 specific bits definition
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_AAED2000_H
-#define __ASM_ARCH_AAED2000_H
-
-/* External GPIOs. */
-
-#define EXT_GPIO_PBASE	AAEC_CS3
-#define EXT_GPIO_VBASE	0xf8100000
-#define EXT_GPIO_LENGTH	0x00001000
-
-#define __ext_gpio_p2v(x)	((x) - EXT_GPIO_PBASE + EXT_GPIO_VBASE)
-#define __ext_gpio_v2p(x)	((x) + EXT_GPIO_PBASE - EXT_GPIO_VBASE)
-
-#define __EXT_GPIO_REG(x)	(*((volatile u32 *)__ext_gpio_p2v(x)))
-#define __EXT_GPIO_PREG(x)	(__ext_gpio_v2p((u32)&(x)))
-
-#define AAED_EXT_GPIO	__EXT_GPIO_REG(EXT_GPIO_PBASE)
-
-#define AAED_EGPIO_KBD_SCAN	0x00003fff /* Keyboard scan data */
-#define AAED_EGPIO_PWR_INT	0x00008fff /* Smart battery charger interrupt */
-#define AAED_EGPIO_SWITCHED	0x000f0000 /* DIP Switches */
-#define AAED_EGPIO_USB_VBUS	0x00400000 /* USB Vbus sense */
-#define AAED_EGPIO_LCD_PWR_EN	0x02000000 /* LCD and backlight PWR enable */
-#define AAED_EGPIO_nLED0	0x20000000 /* LED 0 */
-#define AAED_EGPIO_nLED1	0x20000000 /* LED 1 */
-#define AAED_EGPIO_nLED2	0x20000000 /* LED 2 */
-
-
-#endif /* __ARM_ARCH_AAED2000_H */
diff --git a/include/asm-arm/arch-aaec2000/debug-macro.S b/include/asm-arm/arch-aaec2000/debug-macro.S
deleted file mode 100644
index 7b1fce021d8a..000000000000
--- a/include/asm-arm/arch-aaec2000/debug-macro.S
+++ /dev/null
@@ -1,37 +0,0 @@
-/*  linux/include/asm-arm/arch-aaec2000/debug-macro.S
- *
- *  Debugging macro include header
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include "hardware.h"
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x80000000		@ physical
-		movne	\rx, #io_p2v(0x80000000)	@ virtual
-		orr	\rx, \rx, #0x00000800
-		.endm
-
-		.macro	senduart,rd,rx
-		str	\rd, [\rx, #0]
-		.endm
-
-		.macro	busyuart,rd,rx
-1002:		ldr	\rd, [\rx, #0x10]
-		tst	\rd, #(1 << 7)
-		beq	1002b
-		.endm
-
-		.macro	waituart,rd,rx
-#if 0
-1001:		ldr	\rd, [\rx, #0x10]
-		tst	\rd, #(1 << 5)
-		beq	1001b
-#endif
-		.endm
diff --git a/include/asm-arm/arch-aaec2000/dma.h b/include/asm-arm/arch-aaec2000/dma.h
deleted file mode 100644
index e100b1e526fe..000000000000
--- a/include/asm-arm/arch-aaec2000/dma.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-aaec2000/dma.h
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
diff --git a/include/asm-arm/arch-aaec2000/entry-macro.S b/include/asm-arm/arch-aaec2000/entry-macro.S
deleted file mode 100644
index 83fdf68f6b7c..000000000000
--- a/include/asm-arm/arch-aaec2000/entry-macro.S
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-aaec2000/entry-macro.S
- *
- *  Low-level IRQ helper for aaec-2000 based platforms
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- */
-#include <asm/arch/irqs.h>
-
-		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		mov	r4, #0xf8000000
-		add	r4, r4, #0x00000500
-		mov	\base, r4
-		ldr	\irqstat, [\base, #0]
-		cmp	\irqstat, #0
-		bne	1001f
-		ldr	\irqnr, =NR_IRQS+1
-		b       1003f
-1001:		mov	\irqnr, #0
-1002:		ands	\tmp, \irqstat, #1
-		mov	\irqstat, \irqstat, LSR #1
-		add	\irqnr, \irqnr, #1
-		beq	1002b
-		sub	\irqnr, \irqnr, #1
-1003:
-		.endm
diff --git a/include/asm-arm/arch-aaec2000/hardware.h b/include/asm-arm/arch-aaec2000/hardware.h
deleted file mode 100644
index 153506fd06ed..000000000000
--- a/include/asm-arm/arch-aaec2000/hardware.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-aaec2000/hardware.h
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-#include <asm/arch/aaec2000.h>
-
-/* The kernel is loaded at physical address 0xf8000000.
- * We map the IO space a bit after
- */
-#define PIO_APB_BASE	0x80000000
-#define VIO_APB_BASE	0xf8000000
-#define IO_APB_LENGTH	0x2000
-#define PIO_AHB_BASE	0x80002000
-#define VIO_AHB_BASE	0xf8002000
-#define IO_AHB_LENGTH	0x2000
-
-#define VIO_BASE    VIO_APB_BASE
-#define PIO_BASE    PIO_APB_BASE
-
-#define io_p2v(x) ( (x) - PIO_BASE + VIO_BASE )
-#define io_v2p(x) ( (x) + PIO_BASE - VIO_BASE )
-
-#ifndef __ASSEMBLY__
-
-#include <asm/types.h>
-
-/* FIXME: Is it needed to optimize this a la pxa ?? */
-#define __REG(x)    (*((volatile u32 *)io_p2v(x)))
-#define __PREG(x)   (io_v2p((u32)&(x)))
-
-#else /* __ASSEMBLY__ */
-
-#define __REG(x)    io_p2v(x)
-#define __PREG(x)   io_v2p(x)
-
-#endif
-
-#include "aaec2000.h"
-
-#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-aaec2000/io.h b/include/asm-arm/arch-aaec2000/io.h
deleted file mode 100644
index bc2364ab8752..000000000000
--- a/include/asm-arm/arch-aaec2000/io.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-aaec2000/io.h
- *
- *  Copied from asm/arch/sa1100/io.h
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <asm/arch/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * We don't actually have real ISA nor PCI buses, but there is so many
- * drivers out there that might just work if we fake them...
- */
-#define __io(a)			((void __iomem *)(a))
-#define __mem_pci(a)		(a)
-
-#endif
diff --git a/include/asm-arm/arch-aaec2000/irqs.h b/include/asm-arm/arch-aaec2000/irqs.h
deleted file mode 100644
index de252220e806..000000000000
--- a/include/asm-arm/arch-aaec2000/irqs.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-aaec2000/irqs.h
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-
-#define INT_GPIOF0_FIQ	0  /* External GPIO Port F O Fast Interrupt Input */
-#define INT_BL_FIQ	1  /* Battery Low Fast Interrupt */
-#define INT_WE_FIQ	2  /* Watchdog Expired Fast Interrupt */
-#define INT_MV_FIQ	3  /* Media Changed Interrupt */
-#define INT_SC		4  /* Sound Codec Interrupt */
-#define INT_GPIO1	5  /* GPIO Port F Configurable Int 1 */
-#define INT_GPIO2	6  /* GPIO Port F Configurable Int 2 */
-#define INT_GPIO3	7  /* GPIO Port F Configurable Int 3 */
-#define INT_TMR1_OFL	8  /* Timer 1 Overflow Interrupt */
-#define INT_TMR2_OFL	9  /* Timer 2 Overflow Interrupt */
-#define INT_RTC_CM	10 /* RTC Compare Match Interrupt */
-#define INT_TICK	11 /* 64Hz Tick Interrupt */
-#define INT_UART1	12 /* UART1 Interrupt */
-#define INT_UART2	13 /* UART2 & Modem State Changed Interrupt */
-#define INT_LCD		14 /* LCD Interrupt */
-#define INT_SSI		15 /* SSI End of Transfer Interrupt */
-#define INT_UART3	16 /* UART3 Interrupt */
-#define INT_SCI		17 /* SCI Interrupt */
-#define INT_AAC		18 /* Advanced Audio Codec Interrupt */
-#define INT_MMC		19 /* MMC Interrupt */
-#define INT_USB		20 /* USB Interrupt */
-#define INT_DMA		21 /* DMA Interrupt */
-#define INT_TMR3_UOFL	22 /* Timer 3 Underflow Interrupt */
-#define INT_GPIO4	23 /* GPIO Port F Configurable Int 4 */
-#define INT_GPIO5	24 /* GPIO Port F Configurable Int 4 */
-#define INT_GPIO6	25 /* GPIO Port F Configurable Int 4 */
-#define INT_GPIO7	26 /* GPIO Port F Configurable Int 4 */
-#define INT_BMI		27 /* BMI Interrupt */
-
-#define NR_IRQS		(INT_BMI + 1)
-
-#endif /* __ASM_ARCH_IRQS_H */
diff --git a/include/asm-arm/arch-aaec2000/memory.h b/include/asm-arm/arch-aaec2000/memory.h
deleted file mode 100644
index 9eceb4148922..000000000000
--- a/include/asm-arm/arch-aaec2000/memory.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-aaec2000/memory.h
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-
-#define PHYS_OFFSET	UL(0xf0000000)
-
-#define __virt_to_bus(x)	__virt_to_phys(x)
-#define __bus_to_virt(x)	__phys_to_virt(x)
-
-/*
- * The nodes are the followings:
- *
- *   node 0: 0xf000.0000 - 0xf3ff.ffff
- *   node 1: 0xf400.0000 - 0xf7ff.ffff
- *   node 2: 0xf800.0000 - 0xfbff.ffff
- *   node 3: 0xfc00.0000 - 0xffff.ffff
- */
-#define NODE_MEM_SIZE_BITS	26
-
-#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/include/asm-arm/arch-aaec2000/system.h b/include/asm-arm/arch-aaec2000/system.h
deleted file mode 100644
index 08de97b407a8..000000000000
--- a/include/asm-arm/arch-aaec2000/system.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-aaed2000/system.h
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void arch_reset(char mode)
-{
-	cpu_reset(0);
-}
-
-#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/include/asm-arm/arch-aaec2000/timex.h b/include/asm-arm/arch-aaec2000/timex.h
deleted file mode 100644
index f5708b38fb7f..000000000000
--- a/include/asm-arm/arch-aaec2000/timex.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-aaec2000/timex.h
- *
- *  AAEC-2000 Architecture timex specification
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-#define CLOCK_TICK_RATE		508000
-
-#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/include/asm-arm/arch-aaec2000/uncompress.h b/include/asm-arm/arch-aaec2000/uncompress.h
deleted file mode 100644
index 300f4bf3bc74..000000000000
--- a/include/asm-arm/arch-aaec2000/uncompress.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-aaec2000/uncompress.h
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include "hardware.h"
-
-#define UART(x)         (*(volatile unsigned long *)(serial_port + (x)))
-
-static void putc(int c)
-{
-	unsigned long serial_port;
-        do {
-		serial_port = _UART3_BASE;
-		if (UART(UART_CR) & UART_CR_EN) break;
-		serial_port = _UART1_BASE;
-		if (UART(UART_CR) & UART_CR_EN) break;
-		serial_port = _UART2_BASE;
-		if (UART(UART_CR) & UART_CR_EN) break;
-		return;
-	} while (0);
-
-	/* wait for space in the UART's transmitter */
-	while ((UART(UART_SR) & UART_SR_TxFF))
-		barrier();
-
-	/* send the character out. */
-	UART(UART_DR) = c;
-}
-
-static inline void flush(void)
-{
-}
-
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
-
-#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/include/asm-arm/arch-aaec2000/vmalloc.h b/include/asm-arm/arch-aaec2000/vmalloc.h
deleted file mode 100644
index ecb991e2e4ff..000000000000
--- a/include/asm-arm/arch-aaec2000/vmalloc.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- *  linux/include/asm-arm/arch-aaec2000/vmalloc.h
- *
- *  Copyright (c) 2005 Nicolas Bellido Y Ortega
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END		(PAGE_OFFSET + 0x10000000)
-
-#endif /* __ASM_ARCH_VMALLOC_H */