[ARM] pxa: separate out power manager and clock registers

The power manager and core clock registers aren't present in PXA3
CPUs.  Move them out of pxa-regs.h into pxa2xx-regs.h, and include
pxa2xx-regs.h where necessary.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 2 insertions, 156 deletions

diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h
index 68d742877308..dce9308626b7 100644
--- a/include/asm-arm/arch-pxa/pxa-regs.h
+++ b/include/asm-arm/arch-pxa/pxa-regs.h
@@ -825,120 +825,9 @@
 #endif
 
 /*
- * Power Manager
+ * Power Manager - see pxa2xx-regs.h
  */
 
-#define PMCR		__REG(0x40F00000)  /* Power Manager Control Register */
-#define PSSR		__REG(0x40F00004)  /* Power Manager Sleep Status Register */
-#define PSPR		__REG(0x40F00008)  /* Power Manager Scratch Pad Register */
-#define PWER		__REG(0x40F0000C)  /* Power Manager Wake-up Enable Register */
-#define PRER		__REG(0x40F00010)  /* Power Manager GPIO Rising-Edge Detect Enable Register */
-#define PFER		__REG(0x40F00014)  /* Power Manager GPIO Falling-Edge Detect Enable Register */
-#define PEDR		__REG(0x40F00018)  /* Power Manager GPIO Edge Detect Status Register */
-#define PCFR		__REG(0x40F0001C)  /* Power Manager General Configuration Register */
-#define PGSR0		__REG(0x40F00020)  /* Power Manager GPIO Sleep State Register for GP[31-0] */
-#define PGSR1		__REG(0x40F00024)  /* Power Manager GPIO Sleep State Register for GP[63-32] */
-#define PGSR2		__REG(0x40F00028)  /* Power Manager GPIO Sleep State Register for GP[84-64] */
-#define PGSR3		__REG(0x40F0002C)  /* Power Manager GPIO Sleep State Register for GP[118-96] */
-#define RCSR		__REG(0x40F00030)  /* Reset Controller Status Register */
-
-#define PSLR		__REG(0x40F00034)	/* Power Manager Sleep Config Register */
-#define PSTR		__REG(0x40F00038)	/*Power Manager Standby Config Register */
-#define PSNR		__REG(0x40F0003C)	/*Power Manager Sense Config Register */
-#define PVCR		__REG(0x40F00040)	/*Power Manager VoltageControl Register */
-#define PKWR		__REG(0x40F00050)	/* Power Manager KB Wake-up Enable Reg */
-#define PKSR		__REG(0x40F00054)	/* Power Manager KB Level-Detect Register */
-#define PCMD(x)	__REG2(0x40F00080, (x)<<2)
-#define PCMD0	__REG(0x40F00080 + 0 * 4)
-#define PCMD1	__REG(0x40F00080 + 1 * 4)
-#define PCMD2	__REG(0x40F00080 + 2 * 4)
-#define PCMD3	__REG(0x40F00080 + 3 * 4)
-#define PCMD4	__REG(0x40F00080 + 4 * 4)
-#define PCMD5	__REG(0x40F00080 + 5 * 4)
-#define PCMD6	__REG(0x40F00080 + 6 * 4)
-#define PCMD7	__REG(0x40F00080 + 7 * 4)
-#define PCMD8	__REG(0x40F00080 + 8 * 4)
-#define PCMD9	__REG(0x40F00080 + 9 * 4)
-#define PCMD10	__REG(0x40F00080 + 10 * 4)
-#define PCMD11	__REG(0x40F00080 + 11 * 4)
-#define PCMD12	__REG(0x40F00080 + 12 * 4)
-#define PCMD13	__REG(0x40F00080 + 13 * 4)
-#define PCMD14	__REG(0x40F00080 + 14 * 4)
-#define PCMD15	__REG(0x40F00080 + 15 * 4)
-#define PCMD16	__REG(0x40F00080 + 16 * 4)
-#define PCMD17	__REG(0x40F00080 + 17 * 4)
-#define PCMD18	__REG(0x40F00080 + 18 * 4)
-#define PCMD19	__REG(0x40F00080 + 19 * 4)
-#define PCMD20	__REG(0x40F00080 + 20 * 4)
-#define PCMD21	__REG(0x40F00080 + 21 * 4)
-#define PCMD22	__REG(0x40F00080 + 22 * 4)
-#define PCMD23	__REG(0x40F00080 + 23 * 4)
-#define PCMD24	__REG(0x40F00080 + 24 * 4)
-#define PCMD25	__REG(0x40F00080 + 25 * 4)
-#define PCMD26	__REG(0x40F00080 + 26 * 4)
-#define PCMD27	__REG(0x40F00080 + 27 * 4)
-#define PCMD28	__REG(0x40F00080 + 28 * 4)
-#define PCMD29	__REG(0x40F00080 + 29 * 4)
-#define PCMD30	__REG(0x40F00080 + 30 * 4)
-#define PCMD31	__REG(0x40F00080 + 31 * 4)
-
-#define PCMD_MBC	(1<<12)
-#define PCMD_DCE	(1<<11)
-#define PCMD_LC	(1<<10)
-/* FIXME:  PCMD_SQC need be checked.   */
-#define PCMD_SQC	(3<<8)	/* currently only bit 8 is changeable,
-				   bit 9 should be 0 all day. */
-#define PVCR_VCSA	(0x1<<14)
-#define PVCR_CommandDelay (0xf80)
-#define PCFR_PI2C_EN	(0x1 << 6)
-
-#define PSSR_OTGPH	(1 << 6)	/* OTG Peripheral control Hold */
-#define PSSR_RDH	(1 << 5)	/* Read Disable Hold */
-#define PSSR_PH		(1 << 4)	/* Peripheral Control Hold */
-#define PSSR_STS	(1 << 3)	/* Standby Mode Status */
-#define PSSR_VFS	(1 << 2)	/* VDD Fault Status */
-#define PSSR_BFS	(1 << 1)	/* Battery Fault Status */
-#define PSSR_SSS	(1 << 0)	/* Software Sleep Status */
-
-#define PSLR_SL_ROD	(1 << 20)	/* Sleep-Mode/Depp-Sleep Mode nRESET_OUT Disable */
-
-#define PCFR_RO		(1 << 15)	/* RDH Override */
-#define PCFR_PO		(1 << 14)	/* PH Override */
-#define PCFR_GPROD	(1 << 12)	/* GPIO nRESET_OUT Disable */
-#define PCFR_L1_EN	(1 << 11)	/* Sleep Mode L1 converter Enable */
-#define PCFR_FVC	(1 << 10)	/* Frequency/Voltage Change */
-#define PCFR_DC_EN	(1 << 7)	/* Sleep/deep-sleep DC-DC Converter Enable */
-#define PCFR_PI2CEN	(1 << 6)	/* Enable PI2C controller */
-#define PCFR_GPR_EN	(1 << 4)	/* nRESET_GPIO Pin Enable */
-#define PCFR_DS		(1 << 3)	/* Deep Sleep Mode */
-#define PCFR_FS		(1 << 2)	/* Float Static Chip Selects */
-#define PCFR_FP		(1 << 1)	/* Float PCMCIA controls */
-#define PCFR_OPDE	(1 << 0)	/* 3.6864 MHz oscillator power-down enable */
-
-#define RCSR_GPR	(1 << 3)	/* GPIO Reset */
-#define RCSR_SMR	(1 << 2)	/* Sleep Mode */
-#define RCSR_WDR	(1 << 1)	/* Watchdog Reset */
-#define RCSR_HWR	(1 << 0)	/* Hardware Reset */
-
-#define PWER_GPIO(Nb)	(1 << Nb)	/* GPIO [0..15] wake-up enable     */
-#define PWER_GPIO0	PWER_GPIO (0)	/* GPIO  [0] wake-up enable        */
-#define PWER_GPIO1	PWER_GPIO (1)	/* GPIO  [1] wake-up enable        */
-#define PWER_GPIO2	PWER_GPIO (2)	/* GPIO  [2] wake-up enable        */
-#define PWER_GPIO3	PWER_GPIO (3)	/* GPIO  [3] wake-up enable        */
-#define PWER_GPIO4	PWER_GPIO (4)	/* GPIO  [4] wake-up enable        */
-#define PWER_GPIO5	PWER_GPIO (5)	/* GPIO  [5] wake-up enable        */
-#define PWER_GPIO6	PWER_GPIO (6)	/* GPIO  [6] wake-up enable        */
-#define PWER_GPIO7	PWER_GPIO (7)	/* GPIO  [7] wake-up enable        */
-#define PWER_GPIO8	PWER_GPIO (8)	/* GPIO  [8] wake-up enable        */
-#define PWER_GPIO9	PWER_GPIO (9)	/* GPIO  [9] wake-up enable        */
-#define PWER_GPIO10	PWER_GPIO (10)	/* GPIO [10] wake-up enable        */
-#define PWER_GPIO11	PWER_GPIO (11)	/* GPIO [11] wake-up enable        */
-#define PWER_GPIO12	PWER_GPIO (12)	/* GPIO [12] wake-up enable        */
-#define PWER_GPIO13	PWER_GPIO (13)	/* GPIO [13] wake-up enable        */
-#define PWER_GPIO14	PWER_GPIO (14)	/* GPIO [14] wake-up enable        */
-#define PWER_GPIO15	PWER_GPIO (15)	/* GPIO [15] wake-up enable        */
-#define PWER_RTC	0x80000000	/* RTC alarm wake-up enable        */
-
 /*
  * SSP Serial Port Registers - see include/asm-arm/arch-pxa/regs-ssp.h
  */
@@ -948,52 +837,9 @@
  */
 
 /*
- * Core Clock
+ * Core Clock - see include/asm-arm/arch-pxa/pxa2xx-regs.h
  */
 
-#define CCCR		__REG(0x41300000)  /* Core Clock Configuration Register */
-#define CKEN		__REG(0x41300004)  /* Clock Enable Register */
-#define OSCC		__REG(0x41300008)  /* Oscillator Configuration Register */
-#define CCSR		__REG(0x4130000C)  /* Core Clock Status Register */
-
-#define CCCR_N_MASK	0x0380		/* Run Mode Frequency to Turbo Mode Frequency Multiplier */
-#define CCCR_M_MASK	0x0060		/* Memory Frequency to Run Mode Frequency Multiplier */
-#define CCCR_L_MASK	0x001f		/* Crystal Frequency to Memory Frequency Multiplier */
-
-#define CKEN_AC97CONF   (31)    /* AC97 Controller Configuration */
-#define CKEN_CAMERA	(24)	/* Camera Interface Clock Enable */
-#define CKEN_SSP1	(23)	/* SSP1 Unit Clock Enable */
-#define CKEN_MEMC	(22)	/* Memory Controller Clock Enable */
-#define CKEN_MEMSTK	(21)	/* Memory Stick Host Controller */
-#define CKEN_IM		(20)	/* Internal Memory Clock Enable */
-#define CKEN_KEYPAD	(19)	/* Keypad Interface Clock Enable */
-#define CKEN_USIM	(18)	/* USIM Unit Clock Enable */
-#define CKEN_MSL	(17)	/* MSL Unit Clock Enable */
-#define CKEN_LCD	(16)	/* LCD Unit Clock Enable */
-#define CKEN_PWRI2C	(15)	/* PWR I2C Unit Clock Enable */
-#define CKEN_I2C	(14)	/* I2C Unit Clock Enable */
-#define CKEN_FICP	(13)	/* FICP Unit Clock Enable */
-#define CKEN_MMC	(12)	/* MMC Unit Clock Enable */
-#define CKEN_USB	(11)	/* USB Unit Clock Enable */
-#define CKEN_ASSP	(10)	/* ASSP (SSP3) Clock Enable */
-#define CKEN_USBHOST	(10)	/* USB Host Unit Clock Enable */
-#define CKEN_OSTIMER	(9)	/* OS Timer Unit Clock Enable */
-#define CKEN_NSSP	(9)	/* NSSP (SSP2) Clock Enable */
-#define CKEN_I2S	(8)	/* I2S Unit Clock Enable */
-#define CKEN_BTUART	(7)	/* BTUART Unit Clock Enable */
-#define CKEN_FFUART	(6)	/* FFUART Unit Clock Enable */
-#define CKEN_STUART	(5)	/* STUART Unit Clock Enable */
-#define CKEN_HWUART	(4)	/* HWUART Unit Clock Enable */
-#define CKEN_SSP3	(4)	/* SSP3 Unit Clock Enable */
-#define CKEN_SSP	(3)	/* SSP Unit Clock Enable */
-#define CKEN_SSP2	(3)	/* SSP2 Unit Clock Enable */
-#define CKEN_AC97	(2)	/* AC97 Unit Clock Enable */
-#define CKEN_PWM1	(1)	/* PWM1 Clock Enable */
-#define CKEN_PWM0	(0)	/* PWM0 Clock Enable */
-
-#define OSCC_OON	(1 << 1)	/* 32.768kHz OON (write-once only bit) */
-#define OSCC_OOK	(1 << 0)	/* 32.768kHz OOK (read-only bit) */
-
 #ifdef CONFIG_PXA27x
 
 /* Camera Interface */