Remove the arm26 port

The arm26 port has been in a state where it was far from even compiling
for quite some time.

Ian Molton agreed with the removal.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Ian Molton <spyro@f2s.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 0 insertions, 293 deletions

diff --git a/include/asm-arm26/uaccess.h b/include/asm-arm26/uaccess.h
deleted file mode 100644
index d64ed84cb2d3..000000000000
--- a/include/asm-arm26/uaccess.h
+++ /dev/null
@@ -1,293 +0,0 @@
-#ifndef _ASMARM_UACCESS_H
-#define _ASMARM_UACCESS_H
-
-/*
- * User space memory access functions
- */
-#include <linux/sched.h>
-#include <asm/errno.h>
-
-#define VERIFY_READ 0
-#define VERIFY_WRITE 1
-
-/*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue.  No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
- *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path.  This means when everything is well,
- * we don't even have to jump over them.  Further, they do not intrude
- * on our cache or tlb entries.
- */
-
-struct exception_table_entry
-{
-	unsigned long insn, fixup;
-};
-
-/* Returns 0 if exception not found and fixup otherwise.  */
-extern unsigned long search_exception_table(unsigned long);
-extern int fixup_exception(struct pt_regs *regs);
-
-#define get_ds()	(KERNEL_DS)
-#define get_fs()	(current_thread_info()->addr_limit)
-#define segment_eq(a,b)	((a) == (b))
-
-#include <asm/uaccess-asm.h>
-
-#define access_ok(type,addr,size)	(__range_ok(addr,size) == 0)
-
-/*
- * Single-value transfer routines.  They automatically use the right
- * size if we just have the right pointer type.  Note that the functions
- * which read from user space (*get_*) need to take care not to leak
- * kernel data even if the calling code is buggy and fails to check
- * the return value.  This means zeroing out the destination variable
- * or buffer on error.  Normally this is done out of line by the
- * fixup code, but there are a few places where it intrudes on the
- * main code path.  When we only write to user space, there is no
- * problem.
- *
- * The "__xxx" versions of the user access functions do not verify the
- * address space - it must have been done previously with a separate
- * "access_ok()" call.
- *
- * The "xxx_error" versions set the third argument to EFAULT if an
- * error occurs, and leave it unchanged on success.  Note that these
- * versions are void (ie, don't return a value as such).
- */
-
-extern int __get_user_1(void *);
-extern int __get_user_2(void *);
-extern int __get_user_4(void *);
-extern int __get_user_8(void *);
-extern int __get_user_bad(void);
-
-#define __get_user_x(__r1,__p,__e,__s,__i...)				\
-	   __asm__ __volatile__ ("bl	__get_user_" #__s		\
-		: "=&r" (__e), "=r" (__r1)				\
-		: "0" (__p)						\
-		: __i)
-
-#define get_user(x,p)							\
-	({								\
-		register const typeof(*(p)) *__p asm("r0") = (p);	\
-		register typeof(*(p)) __r1 asm("r1");			\
-		register int __e asm("r0");				\
-		switch (sizeof(*(p))) {					\
-		case 1:							\
-			__get_user_x(__r1, __p, __e, 1, "lr");		\
-	       		break;						\
-		case 2:							\
-			__get_user_x(__r1, __p, __e, 2, "r2", "lr");	\
-			break;						\
-		case 4:							\
-	       		__get_user_x(__r1, __p, __e, 4, "lr");		\
-			break;						\
-		case 8:							\
-			__get_user_x(__r1, __p, __e, 8, "lr");		\
-	       		break;						\
-		default: __e = __get_user_bad(); break;			\
-		}							\
-		x = __r1;						\
-		__e;							\
-	})
-
-
-#define __get_user(x,ptr)                                               \
-({                                                                      \
-        long __gu_err = 0;                                              \
-        __get_user_err((x),(ptr),__gu_err);                             \
-        __gu_err;                                                       \
-})
-
-#define __get_user_error(x,ptr,err)                                     \
-({                                                                      \
-        __get_user_err((x),(ptr),err);                                  \
-        (void) 0;                                                       \
-})
-
-#define __get_user_err(x,ptr,err)                                       \
-do {                                                                    \
-        unsigned long __gu_addr = (unsigned long)(ptr);                 \
-        unsigned long __gu_val;                                         \
-        switch (sizeof(*(ptr))) {                                       \
-        case 1: __get_user_asm_byte(__gu_val,__gu_addr,err);    break;  \
-        case 2: __get_user_asm_half(__gu_val,__gu_addr,err);    break;  \
-        case 4: __get_user_asm_word(__gu_val,__gu_addr,err);    break;  \
-        default: (__gu_val) = __get_user_bad();                         \
-        }                                                               \
-        (x) = (__typeof__(*(ptr)))__gu_val;                             \
-} while (0)
-
-extern int __put_user_1(void *, unsigned int);
-extern int __put_user_2(void *, unsigned int);
-extern int __put_user_4(void *, unsigned int);
-extern int __put_user_8(void *, unsigned long long);
-extern int __put_user_bad(void);
-
-#define __put_user_x(__r1,__p,__e,__s)                                  \
-           __asm__ __volatile__ (                                       \
-                __asmeq("%0", "r0") __asmeq("%2", "r1")                 \
-                "bl     __put_user_" #__s                               \
-                : "=&r" (__e)                                           \
-                : "0" (__p), "r" (__r1)                                 \
-                : "ip", "lr", "cc")
-
-#define put_user(x,p)                                                   \
-        ({                                                              \
-                register const typeof(*(p)) __r1 asm("r1") = (x);       \
-                register const typeof(*(p)) *__p asm("r0") = (p);       \
-                register int __e asm("r0");                             \
-                switch (sizeof(*(__p))) {                               \
-                case 1:                                                 \
-                        __put_user_x(__r1, __p, __e, 1);                \
-                        break;                                          \
-                case 2:                                                 \
-                        __put_user_x(__r1, __p, __e, 2);                \
-                        break;                                          \
-                case 4:                                                 \
-                        __put_user_x(__r1, __p, __e, 4);                \
-                        break;                                          \
-                case 8:                                                 \
-                        __put_user_x(__r1, __p, __e, 8);                \
-                        break;                                          \
-                default: __e = __put_user_bad(); break;                 \
-                }                                                       \
-                __e;                                                    \
-        })
-
-#if 0
-/*********************   OLD METHOD *******************/
-#define __put_user_x(__r1,__p,__e,__s,__i...)				\
-	   __asm__ __volatile__ ("bl	__put_user_" #__s		\
-		: "=&r" (__e)						\
-		: "0" (__p), "r" (__r1)					\
-		: __i)
-
-#define put_user(x,p)							\
-	({								\
-		register const typeof(*(p)) __r1 asm("r1") = (x);	\
-		register const typeof(*(p)) *__p asm("r0") = (p);	\
-		register int __e asm("r0");				\
-		switch (sizeof(*(p))) {					\
-		case 1:							\
-			__put_user_x(__r1, __p, __e, 1, "r2", "lr");	\
-			break;						\
-		case 2:							\
-			__put_user_x(__r1, __p, __e, 2, "r2", "lr");	\
-			break;						\
-		case 4:							\
-			__put_user_x(__r1, __p, __e, 4, "r2", "lr");	\
-			break;						\
-		case 8:							\
-			__put_user_x(__r1, __p, __e, 8, "r2", "ip", "lr");	\
-			break;						\
-		default: __e = __put_user_bad(); break;			\
-		}							\
-		__e;							\
-	})
-/*************************************************/
-#endif
-
-#define __put_user(x,ptr)                                               \
-({                                                                      \
-        long __pu_err = 0;                                              \
-        __put_user_err((x),(ptr),__pu_err);                             \
-        __pu_err;                                                       \
-})
-
-#define __put_user_error(x,ptr,err)                                     \
-({                                                                      \
-        __put_user_err((x),(ptr),err);                                  \
-        (void) 0;                                                       \
-})
-
-#define __put_user_err(x,ptr,err)                                       \
-do {                                                                    \
-        unsigned long __pu_addr = (unsigned long)(ptr);                 \
-        __typeof__(*(ptr)) __pu_val = (x);                              \
-        switch (sizeof(*(ptr))) {                                       \
-        case 1: __put_user_asm_byte(__pu_val,__pu_addr,err);    break;  \
-        case 2: __put_user_asm_half(__pu_val,__pu_addr,err);    break;  \
-        case 4: __put_user_asm_word(__pu_val,__pu_addr,err);    break;  \
-        case 8: __put_user_asm_dword(__pu_val,__pu_addr,err);   break;  \
-        default: __put_user_bad();                                      \
-        }                                                               \
-} while (0)
-
-static __inline__ unsigned long copy_from_user(void *to, const void *from, unsigned long n)
-{
-	if (access_ok(VERIFY_READ, from, n))
-		__do_copy_from_user(to, from, n);
-	else /* security hole - plug it */
-		memzero(to, n);
-	return n;
-}
-
-static __inline__ unsigned long __copy_from_user(void *to, const void *from, unsigned long n)
-{
-	__do_copy_from_user(to, from, n);
-	return n;
-}
-
-static __inline__ unsigned long copy_to_user(void *to, const void *from, unsigned long n)
-{
-	if (access_ok(VERIFY_WRITE, to, n))
-		__do_copy_to_user(to, from, n);
-	return n;
-}
-
-static __inline__ unsigned long __copy_to_user(void *to, const void *from, unsigned long n)
-{
-	__do_copy_to_user(to, from, n);
-	return n;
-}
-
-#define __copy_to_user_inatomic __copy_to_user
-#define __copy_from_user_inatomic __copy_from_user
-
-static __inline__ unsigned long clear_user (void *to, unsigned long n)
-{
-	if (access_ok(VERIFY_WRITE, to, n))
-		__do_clear_user(to, n);
-	return n;
-}
-
-static __inline__ unsigned long __clear_user (void *to, unsigned long n)
-{
-	__do_clear_user(to, n);
-	return n;
-}
-
-static __inline__ long strncpy_from_user (char *dst, const char *src, long count)
-{
-	long res = -EFAULT;
-	if (access_ok(VERIFY_READ, src, 1))
-		__do_strncpy_from_user(dst, src, count, res);
-	return res;
-}
-
-static __inline__ long __strncpy_from_user (char *dst, const char *src, long count)
-{
-	long res;
-	__do_strncpy_from_user(dst, src, count, res);
-	return res;
-}
-
-#define strlen_user(s)	strnlen_user(s, ~0UL >> 1)
-
-static inline long strnlen_user(const char *s, long n)
-{
-	unsigned long res = 0;
-
-	if (__addr_ok(s))
-		__do_strnlen_user(s, n, res);
-
-	return res;
-}
-
-#endif /* _ASMARM_UACCESS_H */