Blackfin arch: move include/asm-blackfin header files to arch/blackfin

Signed-off-by: Bryan Wu <cooloney@kernel.org>

1 files changed, 0 insertions, 168 deletions

diff --git a/include/asm-blackfin/ptrace.h b/include/asm-blackfin/ptrace.h
deleted file mode 100644
index a45a80e54adc..000000000000
--- a/include/asm-blackfin/ptrace.h
+++ /dev/null
@@ -1,168 +0,0 @@
-#ifndef _BFIN_PTRACE_H
-#define _BFIN_PTRACE_H
-
-/*
- * GCC defines register number like this:
- * -----------------------------
- *       0 - 7 are data registers R0-R7
- *       8 - 15 are address registers P0-P7
- *      16 - 31 dsp registers I/B/L0 -- I/B/L3 & M0--M3
- *      32 - 33 A registers A0 & A1
- *      34 -    status register
- * -----------------------------
- *
- * We follows above, except:
- *      32-33 --- Low 32-bit of A0&1
- *      34-35 --- High 8-bit of A0&1
- */
-
-#ifndef __ASSEMBLY__
-
-/* this struct defines the way the registers are stored on the
-   stack during a system call. */
-
-struct pt_regs {
-	long orig_pc;
-	long ipend;
-	long seqstat;
-	long rete;
-	long retn;
-	long retx;
-	long pc;		/* PC == RETI */
-	long rets;
-	long reserved;		/* Used as scratch during system calls */
-	long astat;
-	long lb1;
-	long lb0;
-	long lt1;
-	long lt0;
-	long lc1;
-	long lc0;
-	long a1w;
-	long a1x;
-	long a0w;
-	long a0x;
-	long b3;
-	long b2;
-	long b1;
-	long b0;
-	long l3;
-	long l2;
-	long l1;
-	long l0;
-	long m3;
-	long m2;
-	long m1;
-	long m0;
-	long i3;
-	long i2;
-	long i1;
-	long i0;
-	long usp;
-	long fp;
-	long p5;
-	long p4;
-	long p3;
-	long p2;
-	long p1;
-	long p0;
-	long r7;
-	long r6;
-	long r5;
-	long r4;
-	long r3;
-	long r2;
-	long r1;
-	long r0;
-	long orig_r0;
-	long orig_p0;
-	long syscfg;
-};
-
-/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
-#define PTRACE_GETREGS            12
-#define PTRACE_SETREGS            13	/* ptrace signal  */
-
-#define PTRACE_GETFDPIC           31
-#define PTRACE_GETFDPIC_EXEC      0
-#define PTRACE_GETFDPIC_INTERP    1
-
-#define PS_S  (0x0002)
-
-#ifdef __KERNEL__
-
-/* user_mode returns true if only one bit is set in IPEND, other than the
-   master interrupt enable.  */
-#define user_mode(regs) (!(((regs)->ipend & ~0x10) & (((regs)->ipend & ~0x10) - 1)))
-#define instruction_pointer(regs) ((regs)->pc)
-#define profile_pc(regs) instruction_pointer(regs)
-extern void show_regs(struct pt_regs *);
-
-#endif  /*  __KERNEL__  */
-
-#endif				/* __ASSEMBLY__ */
-
-/*
- * Offsets used by 'ptrace' system call interface.
- */
-
-#define PT_R0 204
-#define PT_R1 200
-#define PT_R2 196
-#define PT_R3 192
-#define PT_R4 188
-#define PT_R5 184
-#define PT_R6 180
-#define PT_R7 176
-#define PT_P0 172
-#define PT_P1 168
-#define PT_P2 164
-#define PT_P3 160
-#define PT_P4 156
-#define PT_P5 152
-#define PT_FP 148
-#define PT_USP 144
-#define PT_I0 140
-#define PT_I1 136
-#define PT_I2 132
-#define PT_I3 128
-#define PT_M0 124
-#define PT_M1 120
-#define PT_M2 116
-#define PT_M3 112
-#define PT_L0 108
-#define PT_L1 104
-#define PT_L2 100
-#define PT_L3 96
-#define PT_B0 92
-#define PT_B1 88
-#define PT_B2 84
-#define PT_B3 80
-#define PT_A0X 76
-#define PT_A0W 72
-#define PT_A1X 68
-#define PT_A1W 64
-#define PT_LC0 60
-#define PT_LC1 56
-#define PT_LT0 52
-#define PT_LT1 48
-#define PT_LB0 44
-#define PT_LB1 40
-#define PT_ASTAT 36
-#define PT_RESERVED 32
-#define PT_RETS 28
-#define PT_PC 24
-#define PT_RETX 20
-#define PT_RETN 16
-#define PT_RETE 12
-#define PT_SEQSTAT 8
-#define PT_IPEND 4
-
-#define PT_SYSCFG 216
-#define PT_TEXT_ADDR 220
-#define PT_TEXT_END_ADDR 224
-#define PT_DATA_ADDR 228
-#define PT_FDPIC_EXEC 232
-#define PT_FDPIC_INTERP 236
-
-#endif				/* _BFIN_PTRACE_H */