Merge branch 'linus' into x86/xentip-x86-xen-2008-06-16_09.21_Mon

11 files changed, 57 insertions, 30 deletions

diff --git a/include/asm-blackfin/bfin-global.h b/include/asm-blackfin/bfin-global.h
index a9248d883675..76033831eb35 100644
--- a/include/asm-blackfin/bfin-global.h
+++ b/include/asm-blackfin/bfin-global.h
@@ -105,13 +105,6 @@ extern int sram_free(const void*);
 extern void *sram_alloc_with_lsl(size_t, unsigned long);
 extern int sram_free_with_lsl(const void*);
 
-extern void led_on(int);
-extern void led_off(int);
-extern void led_toggle(int);
-extern void led_disp_num(int);
-extern void led_toggle_num(int);
-extern void init_leds(void);
-
 extern const char bfin_board_name[];
 extern unsigned long wall_jiffies;
 
diff --git a/include/asm-blackfin/mach-bf527/anomaly.h b/include/asm-blackfin/mach-bf527/anomaly.h
index 735fa02fafb2..4725268a5ada 100644
--- a/include/asm-blackfin/mach-bf527/anomaly.h
+++ b/include/asm-blackfin/mach-bf527/anomaly.h
@@ -15,12 +15,16 @@
 
 /* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
 #define ANOMALY_05000074 (1)
+/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
+#define ANOMALY_05000119 (1)
 /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
 #define ANOMALY_05000122 (1)
 /* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */
 #define ANOMALY_05000245 (1)
 /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
 #define ANOMALY_05000265 (1)
+/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
+#define ANOMALY_05000312 (1)
 /* Incorrect Access of OTP_STATUS During otp_write() Function */
 #define ANOMALY_05000328 (1)
 /* Disallowed Configuration Prevents Subsequent Allowed Configuration on Host DMA Port */
@@ -92,7 +96,6 @@
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000273 (0)
 #define ANOMALY_05000311 (0)
-#define ANOMALY_05000312 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000363 (0)
 
diff --git a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h
index 26e3c8076b4e..96bd09e31e36 100644
--- a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h
@@ -53,6 +53,12 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
+#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1)
+#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0)
+#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
+#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0)
+
 #if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
 # define CONFIG_SERIAL_BFIN_CTSRTS
 
diff --git a/include/asm-blackfin/mach-bf533/anomaly.h b/include/asm-blackfin/mach-bf533/anomaly.h
index 5a6dcc5fa36c..8f7ea112fd3a 100644
--- a/include/asm-blackfin/mach-bf533/anomaly.h
+++ b/include/asm-blackfin/mach-bf533/anomaly.h
@@ -2,7 +2,7 @@
  * File: include/asm-blackfin/mach-bf533/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2004-2007 Analog Devices Inc.
+ * Copyright (C) 2004-2008 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
@@ -176,6 +176,21 @@
 #define ANOMALY_05000315 (1)
 /* Internal Voltage Regulator Values of 1.05V, 1.10V and 1.15V Not Allowed for LQFP Packages */
 #define ANOMALY_05000319 (ANOMALY_BF531 || ANOMALY_BF532)
+/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
+#define ANOMALY_05000357 (1)
+/* UART Break Signal Issues */
+#define ANOMALY_05000363 (__SILICON_REVISION__ < 5)
+/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */
+#define ANOMALY_05000366 (1)
+/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
+#define ANOMALY_05000371 (1)
+/* PPI Does Not Start Properly In Specific Mode */
+#define ANOMALY_05000400 (__SILICON_REVISION__ >= 5)
+/* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */
+#define ANOMALY_05000402 (__SILICON_REVISION__ >= 5)
+/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
+#define ANOMALY_05000403 (1)
+
 
 /* These anomalies have been "phased" out of analog.com anomaly sheets and are
  * here to show running on older silicon just isn't feasible.
@@ -249,20 +264,6 @@
 #define ANOMALY_05000192 (__SILICON_REVISION__ < 3)
 /* Internal Voltage Regulator may not start up */
 #define ANOMALY_05000206 (__SILICON_REVISION__ < 3)
-/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
-#define ANOMALY_05000357 (1)
-/* UART Break Signal Issues */
-#define ANOMALY_05000363 (__SILICON_REVISION__ < 5)
-/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */
-#define ANOMALY_05000366 (1)
-/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
-#define ANOMALY_05000371 (1)
-/* PPI Does Not Start Properly In Specific Mode */
-#define ANOMALY_05000400 (__SILICON_REVISION__ == 5)
-/* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */
-#define ANOMALY_05000402 (__SILICON_REVISION__ == 5)
-/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
-#define ANOMALY_05000403 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000266 (0)
diff --git a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
index d016603b6615..e924569ad1d8 100644
--- a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
@@ -53,6 +53,12 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
+#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1)
+#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0)
+#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
+#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0)
+
 #ifdef CONFIG_BFIN_UART0_CTSRTS
 # define CONFIG_SERIAL_BFIN_CTSRTS
 # ifndef CONFIG_UART0_CTS_PIN
diff --git a/include/asm-blackfin/mach-bf537/anomaly.h b/include/asm-blackfin/mach-bf537/anomaly.h
index a6b08facb242..8460ab9c324f 100644
--- a/include/asm-blackfin/mach-bf537/anomaly.h
+++ b/include/asm-blackfin/mach-bf537/anomaly.h
@@ -2,7 +2,7 @@
  * File: include/asm-blackfin/mach-bf537/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2004-2007 Analog Devices Inc.
+ * Copyright (C) 2004-2008 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
@@ -132,8 +132,8 @@
 #define ANOMALY_05000322 (1)
 /* Ethernet MAC MDIO Reads Do Not Meet IEEE Specification */
 #define ANOMALY_05000341 (__SILICON_REVISION__ >= 3)
-/* New Feature: UART Remains Enabled after UART Boot (Not Available on Older Silicon) */
-#define ANOMALY_05000350 (__SILICON_REVISION__ < 3)
+/* New Feature: UART Remains Enabled after UART Boot */
+#define ANOMALY_05000350 (__SILICON_REVISION__ >= 3)
 /* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */
 #define ANOMALY_05000355 (1)
 /* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
@@ -145,12 +145,10 @@
 /* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
 #define ANOMALY_05000371 (1)
 /* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */
-#define ANOMALY_05000402 (__SILICON_REVISION__ >= 3)
+#define ANOMALY_05000402 (__SILICON_REVISION__ >= 5)
 /* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
 #define ANOMALY_05000403 (1)
 
-
-
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000125 (0)
 #define ANOMALY_05000158 (0)
diff --git a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h
index f79d1a0e9129..41d7b6490bb1 100644
--- a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h
@@ -53,6 +53,12 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
+#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1)
+#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0)
+#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
+#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0)
+
 #if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
 # define CONFIG_SERIAL_BFIN_CTSRTS
 
diff --git a/include/asm-blackfin/mach-bf548/anomaly.h b/include/asm-blackfin/mach-bf548/anomaly.h
index 49d3cebc5293..3ad59655881a 100644
--- a/include/asm-blackfin/mach-bf548/anomaly.h
+++ b/include/asm-blackfin/mach-bf548/anomaly.h
@@ -75,6 +75,8 @@
 #define ANOMALY_05000365 (1)
 /* Addressing Conflict between Boot ROM and Asynchronous Memory */
 #define ANOMALY_05000369 (1)
+/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
+#define ANOMALY_05000371 (1)
 /* Mobile DDR Operation Not Functional */
 #define ANOMALY_05000377 (1)
 /* Security/Authentication Speedpath Causes Authentication To Fail To Initiate */
diff --git a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
index 5eb46a77d919..59b4ad4e5b4a 100644
--- a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
@@ -57,6 +57,12 @@
 #define UART_SET_DLAB(uart)     /* MMRs not muxed on BF54x */
 #define UART_CLEAR_DLAB(uart)   /* MMRs not muxed on BF54x */
 
+#define UART_GET_CTS(x) (UART_GET_MSR(x) & CTS)
+#define UART_SET_RTS(x) (UART_PUT_MCR(x, UART_GET_MCR(x) | MRTS))
+#define UART_CLEAR_RTS(x) (UART_PUT_MCR(x, UART_GET_MCR(x) & ~MRTS))
+#define UART_ENABLE_INTS(x, v) UART_SET_IER(x, v)
+#define UART_DISABLE_INTS(x) UART_CLEAR_IER(x, 0xF)
+
 #if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
 # define CONFIG_SERIAL_BFIN_CTSRTS
 
diff --git a/include/asm-blackfin/mach-bf561/anomaly.h b/include/asm-blackfin/mach-bf561/anomaly.h
index 82157caa96a2..5c5d7d7d695f 100644
--- a/include/asm-blackfin/mach-bf561/anomaly.h
+++ b/include/asm-blackfin/mach-bf561/anomaly.h
@@ -2,7 +2,7 @@
  * File: include/asm-blackfin/mach-bf561/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2004-2007 Analog Devices Inc.
+ * Copyright (C) 2004-2008 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
diff --git a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h
index 7a9628769296..30d90b580f18 100644
--- a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h
@@ -53,6 +53,12 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
+#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1)
+#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0)
+#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
+#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0)
+
 #ifdef CONFIG_BFIN_UART0_CTSRTS
 # define CONFIG_SERIAL_BFIN_CTSRTS
 # ifndef CONFIG_UART0_CTS_PIN