Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 753 insertions, 0 deletions

diff --git a/include/asm-m32r/uaccess.h b/include/asm-m32r/uaccess.h
new file mode 100644
index 000000000000..bbb8ac4018a0
--- /dev/null
+++ b/include/asm-m32r/uaccess.h
@@ -0,0 +1,753 @@
+#ifndef _ASM_M32R_UACCESS_H
+#define _ASM_M32R_UACCESS_H
+
+/*
+ *  linux/include/asm-m32r/uaccess.h
+ *
+ *  M32R version.
+ *    Copyright (C) 2004  Hirokazu Takata <takata at linux-m32r.org>
+ */
+
+#undef UACCESS_DEBUG
+
+#ifdef UACCESS_DEBUG
+#define UAPRINTK(args...) printk(args)
+#else
+#define UAPRINTK(args...)
+#endif /* UACCESS_DEBUG */
+
+/*
+ * User space memory access functions
+ */
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/thread_info.h>
+#include <asm/page.h>
+
+#define VERIFY_READ 0
+#define VERIFY_WRITE 1
+
+/*
+ * The fs value determines whether argument validity checking should be
+ * performed or not.  If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * For historical reasons, these macros are grossly misnamed.
+ */
+
+#define MAKE_MM_SEG(s)	((mm_segment_t) { (s) })
+
+#ifdef CONFIG_MMU
+#define KERNEL_DS	MAKE_MM_SEG(0xFFFFFFFF)
+#define USER_DS		MAKE_MM_SEG(PAGE_OFFSET)
+#else
+#define KERNEL_DS	MAKE_MM_SEG(0xFFFFFFFF)
+#define USER_DS		MAKE_MM_SEG(0xFFFFFFFF)
+#endif /* CONFIG_MMU */
+
+#define get_ds()	(KERNEL_DS)
+#ifdef CONFIG_MMU
+#define get_fs()	(current_thread_info()->addr_limit)
+#define set_fs(x)	(current_thread_info()->addr_limit = (x))
+#else
+static inline mm_segment_t get_fs(void)
+{
+  return USER_DS;
+}
+
+static inline void set_fs(mm_segment_t s)
+{
+}
+#endif /* CONFIG_MMU */
+
+#define segment_eq(a,b)	((a).seg == (b).seg)
+
+#define __addr_ok(addr) \
+	((unsigned long)(addr) < (current_thread_info()->addr_limit.seg))
+
+/*
+ * Test whether a block of memory is a valid user space address.
+ * Returns 0 if the range is valid, nonzero otherwise.
+ *
+ * This is equivalent to the following test:
+ * (u33)addr + (u33)size >= (u33)current->addr_limit.seg
+ *
+ * This needs 33-bit arithmetic. We have a carry...
+ */
+#define __range_ok(addr,size) ({					\
+	unsigned long flag, sum; 					\
+	__chk_user_ptr(addr);						\
+	asm ( 								\
+		"	cmpu	%1, %1    ; clear cbit\n"		\
+		"	addx	%1, %3    ; set cbit if overflow\n"	\
+		"	subx	%0, %0\n"				\
+		"	cmpu	%4, %1\n"				\
+		"	subx	%0, %5\n"				\
+		: "=&r"(flag), "=r"(sum)				\
+		: "1"(addr), "r"((int)(size)), 				\
+		  "r"(current_thread_info()->addr_limit.seg), "r"(0)	\
+		: "cbit" );						\
+	flag; })
+
+/**
+ * access_ok: - Checks if a user space pointer is valid
+ * @type: Type of access: %VERIFY_READ or %VERIFY_WRITE.  Note that
+ *        %VERIFY_WRITE is a superset of %VERIFY_READ - if it is safe
+ *        to write to a block, it is always safe to read from it.
+ * @addr: User space pointer to start of block to check
+ * @size: Size of block to check
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Checks if a pointer to a block of memory in user space is valid.
+ *
+ * Returns true (nonzero) if the memory block may be valid, false (zero)
+ * if it is definitely invalid.
+ *
+ * Note that, depending on architecture, this function probably just
+ * checks that the pointer is in the user space range - after calling
+ * this function, memory access functions may still return -EFAULT.
+ */
+#ifdef CONFIG_MMU
+#define access_ok(type,addr,size) (likely(__range_ok(addr,size) == 0))
+#else
+static inline int access_ok(int type, const void *addr, unsigned long size)
+{
+  extern unsigned long memory_start, memory_end;
+  unsigned long val = (unsigned long)addr;
+
+  return ((val >= memory_start) && ((val + size) < memory_end));
+}
+#endif /* CONFIG_MMU */
+
+/**
+ * verify_area: - Obsolete/deprecated and will go away soon,
+ * use access_ok() instead.
+ * @type: Type of access: %VERIFY_READ or %VERIFY_WRITE
+ * @addr: User space pointer to start of block to check
+ * @size: Size of block to check
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This function has been replaced by access_ok().
+ *
+ * Checks if a pointer to a block of memory in user space is valid.
+ *
+ * Returns zero if the memory block may be valid, -EFAULT
+ * if it is definitely invalid.
+ *
+ * See access_ok() for more details.
+ */
+static inline int __deprecated verify_area(int type, const void __user *addr,
+			      unsigned long size)
+{
+	return access_ok(type, addr, size) ? 0 : -EFAULT;
+}
+
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry
+{
+	unsigned long insn, fixup;
+};
+
+extern int fixup_exception(struct pt_regs *regs);
+
+/*
+ * These are the main single-value transfer routines.  They automatically
+ * use the right size if we just have the right pointer type.
+ *
+ * This gets kind of ugly. We want to return _two_ values in "get_user()"
+ * and yet we don't want to do any pointers, because that is too much
+ * of a performance impact. Thus we have a few rather ugly macros here,
+ * and hide all the uglyness from the user.
+ *
+ * The "__xxx" versions of the user access functions are versions that
+ * do not verify the address space, that must have been done previously
+ * with a separate "access_ok()" call (this is used when we do multiple
+ * accesses to the same area of user memory).
+ */
+
+extern void __get_user_1(void);
+extern void __get_user_2(void);
+extern void __get_user_4(void);
+
+#ifndef MODULE
+#define __get_user_x(size,ret,x,ptr) 					\
+	__asm__ __volatile__(						\
+		"	mv	r0, %0\n"				\
+		"	mv	r1, %1\n" 				\
+		"	bl __get_user_" #size "\n"			\
+		"	mv	%0, r0\n"				\
+		"	mv	%1, r1\n" 				\
+		: "=r"(ret), "=r"(x) 					\
+		: "0"(ptr)						\
+		: "r0", "r1", "r14" )
+#else /* MODULE */
+/*
+ * Use "jl" instead of "bl" for MODULE
+ */
+#define __get_user_x(size,ret,x,ptr) 					\
+	__asm__ __volatile__(						\
+		"	mv	r0, %0\n"				\
+		"	mv	r1, %1\n" 				\
+		"	seth	lr, #high(__get_user_" #size ")\n"	\
+		"	or3	lr, lr, #low(__get_user_" #size ")\n"	\
+		"	jl 	lr\n"					\
+		"	mv	%0, r0\n"				\
+		"	mv	%1, r1\n" 				\
+		: "=r"(ret), "=r"(x) 					\
+		: "0"(ptr)						\
+		: "r0", "r1", "r14" )
+#endif
+
+/* Careful: we have to cast the result to the type of the pointer for sign
+   reasons */
+/**
+ * get_user: - Get a simple variable from user space.
+ * @x:   Variable to store result.
+ * @ptr: Source address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple variable from user space to kernel
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and the result of
+ * dereferencing @ptr must be assignable to @x without a cast.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ * On error, the variable @x is set to zero.
+ */
+#define get_user(x,ptr)							\
+({	int __ret_gu,__val_gu;						\
+	__chk_user_ptr(ptr);						\
+	switch(sizeof (*(ptr))) {					\
+	case 1:  __get_user_x(1,__ret_gu,__val_gu,ptr); break;		\
+	case 2:  __get_user_x(2,__ret_gu,__val_gu,ptr); break;		\
+	case 4:  __get_user_x(4,__ret_gu,__val_gu,ptr); break;		\
+	default: __get_user_x(X,__ret_gu,__val_gu,ptr); break;		\
+	}								\
+	(x) = (__typeof__(*(ptr)))__val_gu;				\
+	__ret_gu;							\
+})
+
+extern void __put_user_bad(void);
+
+/**
+ * put_user: - Write a simple value into user space.
+ * @x:   Value to copy to user space.
+ * @ptr: Destination address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple value from kernel space to user
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and @x must be assignable
+ * to the result of dereferencing @ptr.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ */
+#define put_user(x,ptr)							\
+  __put_user_check((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
+
+
+/**
+ * __get_user: - Get a simple variable from user space, with less checking.
+ * @x:   Variable to store result.
+ * @ptr: Source address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple variable from user space to kernel
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and the result of
+ * dereferencing @ptr must be assignable to @x without a cast.
+ *
+ * Caller must check the pointer with access_ok() before calling this
+ * function.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ * On error, the variable @x is set to zero.
+ */
+#define __get_user(x,ptr) \
+  __get_user_nocheck((x),(ptr),sizeof(*(ptr)))
+
+
+/**
+ * __put_user: - Write a simple value into user space, with less checking.
+ * @x:   Value to copy to user space.
+ * @ptr: Destination address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple value from kernel space to user
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and @x must be assignable
+ * to the result of dereferencing @ptr.
+ *
+ * Caller must check the pointer with access_ok() before calling this
+ * function.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ */
+#define __put_user(x,ptr) \
+  __put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
+
+#define __put_user_nocheck(x,ptr,size)					\
+({									\
+	long __pu_err;							\
+	__put_user_size((x),(ptr),(size),__pu_err);			\
+	__pu_err;							\
+})
+
+
+#define __put_user_check(x,ptr,size)					\
+({									\
+	long __pu_err = -EFAULT;					\
+	__typeof__(*(ptr)) __user *__pu_addr = (ptr);			\
+	might_sleep();							\
+	if (access_ok(VERIFY_WRITE,__pu_addr,size))			\
+		__put_user_size((x),__pu_addr,(size),__pu_err);		\
+	__pu_err;							\
+})
+
+#if defined(__LITTLE_ENDIAN__)
+#define __put_user_u64(x, addr, err)                                    \
+        __asm__ __volatile__(                                           \
+                "       .fillinsn\n"                                    \
+                "1:     st %L1,@%2\n"                                    \
+                "       .fillinsn\n"                                    \
+                "2:     st %H1,@(4,%2)\n"                                \
+                "       .fillinsn\n"                                    \
+                "3:\n"                                                  \
+                ".section .fixup,\"ax\"\n"                              \
+                "       .balign 4\n"                                    \
+                "4:     ldi %0,%3\n"                                    \
+                "       seth r14,#high(3b)\n"                           \
+                "       or3 r14,r14,#low(3b)\n"                         \
+                "       jmp r14\n"                                      \
+                ".previous\n"                                           \
+                ".section __ex_table,\"a\"\n"                           \
+                "       .balign 4\n"                                    \
+                "       .long 1b,4b\n"                                  \
+                "       .long 2b,4b\n"                                  \
+                ".previous"                                             \
+                : "=r"(err)                                             \
+                : "r"(x), "r"(addr), "i"(-EFAULT), "0"(err)		\
+                : "r14", "memory")
+
+#elif defined(__BIG_ENDIAN__)
+#define __put_user_u64(x, addr, err)					\
+	__asm__ __volatile__(						\
+		"	.fillinsn\n"					\
+		"1:	st %H1,@%2\n"					\
+		"	.fillinsn\n"					\
+		"2:	st %L1,@(4,%2)\n"				\
+		"	.fillinsn\n"					\
+		"3:\n"							\
+		".section .fixup,\"ax\"\n"				\
+		"	.balign 4\n"					\
+		"4:	ldi %0,%3\n"					\
+		"	seth r14,#high(3b)\n"				\
+		"	or3 r14,r14,#low(3b)\n"				\
+		"	jmp r14\n"					\
+		".previous\n"						\
+		".section __ex_table,\"a\"\n"				\
+		"	.balign 4\n"					\
+		"	.long 1b,4b\n"					\
+		"	.long 2b,4b\n"					\
+		".previous"						\
+		: "=r"(err)						\
+		: "r"(x), "r"(addr), "i"(-EFAULT), "0"(err)		\
+		: "r14", "memory")
+#else
+#error no endian defined
+#endif
+
+#define __put_user_size(x,ptr,size,retval)				\
+do {									\
+	retval = 0;							\
+	__chk_user_ptr(ptr);						\
+	switch (size) {							\
+	  case 1: __put_user_asm(x,ptr,retval,"b"); break;		\
+	  case 2: __put_user_asm(x,ptr,retval,"h"); break;		\
+	  case 4: __put_user_asm(x,ptr,retval,""); break;		\
+	  case 8: __put_user_u64((__typeof__(*ptr))(x),ptr,retval); break;\
+	  default: __put_user_bad();					\
+	}								\
+} while (0)
+
+struct __large_struct { unsigned long buf[100]; };
+#define __m(x) (*(struct __large_struct *)(x))
+
+/*
+ * Tell gcc we read from memory instead of writing: this is because
+ * we do not write to any memory gcc knows about, so there are no
+ * aliasing issues.
+ */
+#define __put_user_asm(x, addr, err, itype)				\
+	__asm__ __volatile__(						\
+		"	.fillinsn\n"					\
+		"1:	st"itype" %1,@%2\n"				\
+		"	.fillinsn\n"					\
+		"2:\n"							\
+		".section .fixup,\"ax\"\n"				\
+		"	.balign 4\n"					\
+		"3:	ldi %0,%3\n"					\
+		"	seth r14,#high(2b)\n"				\
+		"	or3 r14,r14,#low(2b)\n"				\
+		"	jmp r14\n"					\
+		".previous\n"						\
+		".section __ex_table,\"a\"\n"				\
+		"	.balign 4\n"					\
+		"	.long 1b,3b\n"					\
+		".previous"						\
+		: "=r"(err)						\
+		: "r"(x), "r"(addr), "i"(-EFAULT), "0"(err)		\
+		: "r14", "memory")
+
+#define __get_user_nocheck(x,ptr,size)					\
+({									\
+	long __gu_err, __gu_val;					\
+	__get_user_size(__gu_val,(ptr),(size),__gu_err);		\
+	(x) = (__typeof__(*(ptr)))__gu_val;				\
+	__gu_err;							\
+})
+
+extern long __get_user_bad(void);
+
+#define __get_user_size(x,ptr,size,retval)				\
+do {									\
+	retval = 0;							\
+	__chk_user_ptr(ptr);						\
+	switch (size) {							\
+	  case 1: __get_user_asm(x,ptr,retval,"ub"); break;		\
+	  case 2: __get_user_asm(x,ptr,retval,"uh"); break;		\
+	  case 4: __get_user_asm(x,ptr,retval,""); break;		\
+	  default: (x) = __get_user_bad();				\
+	}								\
+} while (0)
+
+#define __get_user_asm(x, addr, err, itype)				\
+	__asm__ __volatile__(						\
+		"	.fillinsn\n"					\
+		"1:	ld"itype" %1,@%2\n"				\
+		"	.fillinsn\n"					\
+		"2:\n"							\
+		".section .fixup,\"ax\"\n"				\
+		"	.balign 4\n"					\
+		"3:	ldi %0,%3\n"					\
+		"	seth r14,#high(2b)\n"				\
+		"	or3 r14,r14,#low(2b)\n"				\
+		"	jmp r14\n"					\
+		".previous\n"						\
+		".section __ex_table,\"a\"\n"				\
+		"	.balign 4\n"					\
+		"	.long 1b,3b\n"					\
+		".previous"						\
+		: "=r"(err), "=&r"(x)					\
+		: "r"(addr), "i"(-EFAULT), "0"(err)			\
+		: "r14", "memory")
+
+/*
+ * Here we special-case 1, 2 and 4-byte copy_*_user invocations.  On a fault
+ * we return the initial request size (1, 2 or 4), as copy_*_user should do.
+ * If a store crosses a page boundary and gets a fault, the m32r will not write
+ * anything, so this is accurate.
+ */
+
+
+/*
+ * Copy To/From Userspace
+ */
+
+/* Generic arbitrary sized copy.  */
+/* Return the number of bytes NOT copied.  */
+#define __copy_user(to,from,size)					\
+do {									\
+	unsigned long __dst, __src, __c;				\
+	__asm__ __volatile__ (						\
+		"	mv	r14, %0\n"				\
+		"	or	r14, %1\n"				\
+		"	beq	%0, %1, 9f\n"				\
+		"	beqz	%2, 9f\n"				\
+		"	and3	r14, r14, #3\n"				\
+		"	bnez	r14, 2f\n"				\
+		"	and3	%2, %2, #3\n"				\
+		"	beqz	%3, 2f\n"				\
+		"	addi	%0, #-4		; word_copy \n"		\
+		"	.fillinsn\n"					\
+		"0:	ld	r14, @%1+\n"				\
+		"	addi	%3, #-1\n"				\
+		"	.fillinsn\n"					\
+		"1:	st	r14, @+%0\n"				\
+		"	bnez	%3, 0b\n"				\
+		"	beqz	%2, 9f\n"				\
+		"	addi	%0, #4\n"				\
+		"	.fillinsn\n"					\
+		"2:	ldb	r14, @%1	; byte_copy \n"		\
+		"	.fillinsn\n"					\
+		"3:	stb	r14, @%0\n"				\
+		"	addi	%1, #1\n"				\
+		"	addi	%2, #-1\n"				\
+		"	addi	%0, #1\n"				\
+		"	bnez	%2, 2b\n"				\
+		"	.fillinsn\n"					\
+		"9:\n"							\
+		".section .fixup,\"ax\"\n"				\
+		"	.balign 4\n"					\
+		"5:	addi	%3, #1\n"				\
+		"	addi	%1, #-4\n"				\
+		"	.fillinsn\n"					\
+		"6:	slli	%3, #2\n"				\
+		"	add	%2, %3\n"				\
+		"	addi	%0, #4\n"				\
+		"	.fillinsn\n"					\
+		"7:	seth	r14, #high(9b)\n"			\
+		"	or3	r14, r14, #low(9b)\n"			\
+		"	jmp	r14\n"					\
+		".previous\n"						\
+		".section __ex_table,\"a\"\n"				\
+		"	.balign 4\n"					\
+		"	.long 0b,6b\n"					\
+		"	.long 1b,5b\n"					\
+		"	.long 2b,9b\n"					\
+		"	.long 3b,9b\n"					\
+		".previous\n"						\
+		: "=&r"(__dst), "=&r"(__src), "=&r"(size), "=&r"(__c)	\
+		: "0"(to), "1"(from), "2"(size), "3"(size / 4)		\
+		: "r14", "memory");					\
+} while (0)
+
+#define __copy_user_zeroing(to,from,size)				\
+do {									\
+	unsigned long __dst, __src, __c;				\
+	__asm__ __volatile__ (						\
+		"	mv	r14, %0\n"				\
+		"	or	r14, %1\n"				\
+		"	beq	%0, %1, 9f\n"				\
+		"	beqz	%2, 9f\n"				\
+		"	and3	r14, r14, #3\n"				\
+		"	bnez	r14, 2f\n"				\
+		"	and3	%2, %2, #3\n"				\
+		"	beqz	%3, 2f\n"				\
+		"	addi	%0, #-4		; word_copy \n"		\
+		"	.fillinsn\n"					\
+		"0:	ld	r14, @%1+\n"				\
+		"	addi	%3, #-1\n"				\
+		"	.fillinsn\n"					\
+		"1:	st	r14, @+%0\n"				\
+		"	bnez	%3, 0b\n"				\
+		"	beqz	%2, 9f\n"				\
+		"	addi	%0, #4\n"				\
+		"	.fillinsn\n"					\
+		"2:	ldb	r14, @%1	; byte_copy \n"		\
+		"	.fillinsn\n"					\
+		"3:	stb	r14, @%0\n"				\
+		"	addi	%1, #1\n"				\
+		"	addi	%2, #-1\n"				\
+		"	addi	%0, #1\n"				\
+		"	bnez	%2, 2b\n"				\
+		"	.fillinsn\n"					\
+		"9:\n"							\
+		".section .fixup,\"ax\"\n"				\
+		"	.balign 4\n"					\
+		"5:	addi	%3, #1\n"				\
+		"	addi	%1, #-4\n"				\
+		"	.fillinsn\n"					\
+		"6:	slli	%3, #2\n"				\
+		"	add	%2, %3\n"				\
+		"	addi	%0, #4\n"				\
+		"	.fillinsn\n"					\
+		"7:	ldi	r14, #0		; store zero \n"	\
+		"	.fillinsn\n"					\
+		"8:	addi	%2, #-1\n"				\
+		"	stb	r14, @%0	; ACE? \n"		\
+		"	addi	%0, #1\n"				\
+		"	bnez	%2, 8b\n"				\
+		"	seth	r14, #high(9b)\n"			\
+		"	or3	r14, r14, #low(9b)\n"			\
+		"	jmp	r14\n"					\
+		".previous\n"						\
+		".section __ex_table,\"a\"\n"				\
+		"	.balign 4\n"					\
+		"	.long 0b,6b\n"					\
+		"	.long 1b,5b\n"					\
+		"	.long 2b,7b\n"					\
+		"	.long 3b,7b\n"					\
+		".previous\n"						\
+		: "=&r"(__dst), "=&r"(__src), "=&r"(size), "=&r"(__c)	\
+		: "0"(to), "1"(from), "2"(size), "3"(size / 4)		\
+		: "r14", "memory");					\
+} while (0)
+
+
+/* We let the __ versions of copy_from/to_user inline, because they're often
+ * used in fast paths and have only a small space overhead.
+ */
+static inline unsigned long __generic_copy_from_user_nocheck(void *to,
+	const void __user *from, unsigned long n)
+{
+	__copy_user_zeroing(to,from,n);
+	return n;
+}
+
+static inline unsigned long __generic_copy_to_user_nocheck(void __user *to,
+	const void *from, unsigned long n)
+{
+	__copy_user(to,from,n);
+	return n;
+}
+
+unsigned long __generic_copy_to_user(void *, const void *, unsigned long);
+unsigned long __generic_copy_from_user(void *, const void *, unsigned long);
+
+/**
+ * __copy_to_user: - Copy a block of data into user space, with less checking.
+ * @to:   Destination address, in user space.
+ * @from: Source address, in kernel space.
+ * @n:    Number of bytes to copy.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Copy data from kernel space to user space.  Caller must check
+ * the specified block with access_ok() before calling this function.
+ *
+ * Returns number of bytes that could not be copied.
+ * On success, this will be zero.
+ */
+#define __copy_to_user(to,from,n)			\
+	__generic_copy_to_user_nocheck((to),(from),(n))
+
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+/**
+ * copy_to_user: - Copy a block of data into user space.
+ * @to:   Destination address, in user space.
+ * @from: Source address, in kernel space.
+ * @n:    Number of bytes to copy.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Copy data from kernel space to user space.
+ *
+ * Returns number of bytes that could not be copied.
+ * On success, this will be zero.
+ */
+#define copy_to_user(to,from,n)				\
+({							\
+	might_sleep();					\
+	__generic_copy_to_user((to),(from),(n));	\
+})
+
+/**
+ * __copy_from_user: - Copy a block of data from user space, with less checking. * @to:   Destination address, in kernel space.
+ * @from: Source address, in user space.
+ * @n:    Number of bytes to copy.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Copy data from user space to kernel space.  Caller must check
+ * the specified block with access_ok() before calling this function.
+ *
+ * Returns number of bytes that could not be copied.
+ * On success, this will be zero.
+ *
+ * If some data could not be copied, this function will pad the copied
+ * data to the requested size using zero bytes.
+ */
+#define __copy_from_user(to,from,n)			\
+	__generic_copy_from_user_nocheck((to),(from),(n))
+
+/**
+ * copy_from_user: - Copy a block of data from user space.
+ * @to:   Destination address, in kernel space.
+ * @from: Source address, in user space.
+ * @n:    Number of bytes to copy.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Copy data from user space to kernel space.
+ *
+ * Returns number of bytes that could not be copied.
+ * On success, this will be zero.
+ *
+ * If some data could not be copied, this function will pad the copied
+ * data to the requested size using zero bytes.
+ */
+#define copy_from_user(to,from,n)			\
+({							\
+	might_sleep();					\
+__generic_copy_from_user((to),(from),(n));	\
+})
+
+long __must_check strncpy_from_user(char *dst, const char __user *src,
+				long count);
+long __must_check __strncpy_from_user(char *dst,
+				const char __user *src, long count);
+
+/**
+ * __clear_user: - Zero a block of memory in user space, with less checking.
+ * @to:   Destination address, in user space.
+ * @n:    Number of bytes to zero.
+ *
+ * Zero a block of memory in user space.  Caller must check
+ * the specified block with access_ok() before calling this function.
+ *
+ * Returns number of bytes that could not be cleared.
+ * On success, this will be zero.
+ */
+unsigned long __clear_user(void __user *mem, unsigned long len);
+
+/**
+ * clear_user: - Zero a block of memory in user space.
+ * @to:   Destination address, in user space.
+ * @n:    Number of bytes to zero.
+ *
+ * Zero a block of memory in user space.  Caller must check
+ * the specified block with access_ok() before calling this function.
+ *
+ * Returns number of bytes that could not be cleared.
+ * On success, this will be zero.
+ */
+unsigned long clear_user(void __user *mem, unsigned long len);
+
+/**
+ * strlen_user: - Get the size of a string in user space.
+ * @str: The string to measure.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Get the size of a NUL-terminated string in user space.
+ *
+ * Returns the size of the string INCLUDING the terminating NUL.
+ * On exception, returns 0.
+ *
+ * If there is a limit on the length of a valid string, you may wish to
+ * consider using strnlen_user() instead.
+ */
+#define strlen_user(str) strnlen_user(str, ~0UL >> 1)
+long strnlen_user(const char __user *str, long n);
+
+#endif /* _ASM_M32R_UACCESS_H */