summaryrefslogtreecommitdiff
path: root/include/asm-mips/jazz.h
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /include/asm-mips/jazz.h
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'include/asm-mips/jazz.h')
-rw-r--r--include/asm-mips/jazz.h322
1 files changed, 322 insertions, 0 deletions
diff --git a/include/asm-mips/jazz.h b/include/asm-mips/jazz.h
new file mode 100644
index 000000000000..81cbf004fd13
--- /dev/null
+++ b/include/asm-mips/jazz.h
@@ -0,0 +1,322 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995 - 1998 by Andreas Busse and Ralf Baechle
+ */
+#ifndef __ASM_JAZZ_H
+#define __ASM_JAZZ_H
+
+/*
+ * The addresses below are virtual address. The mappings are
+ * created on startup via wired entries in the tlb. The Mips
+ * Magnum R3000 and R4000 machines are similar in many aspects,
+ * but many hardware register are accessible at 0xb9000000 in
+ * instead of 0xe0000000.
+ */
+
+#define JAZZ_LOCAL_IO_SPACE 0xe0000000
+
+/*
+ * Revision numbers in PICA_ASIC_REVISION
+ *
+ * 0xf0000000 - Rev1
+ * 0xf0000001 - Rev2
+ * 0xf0000002 - Rev3
+ */
+#define PICA_ASIC_REVISION 0xe0000008
+
+/*
+ * The segments of the seven segment LED are mapped
+ * to the control bits as follows:
+ *
+ * (7)
+ * ---------
+ * | |
+ * (2) | | (6)
+ * | (1) |
+ * ---------
+ * | |
+ * (3) | | (5)
+ * | (4) |
+ * --------- . (0)
+ */
+#define PICA_LED 0xe000f000
+
+/*
+ * Some characters for the LED control registers
+ * The original Mips machines seem to have a LED display
+ * with integrated decoder while the Acer machines can
+ * control each of the seven segments and the dot independently.
+ * It's only a toy, anyway...
+ */
+#define LED_DOT 0x01
+#define LED_SPACE 0x00
+#define LED_0 0xfc
+#define LED_1 0x60
+#define LED_2 0xda
+#define LED_3 0xf2
+#define LED_4 0x66
+#define LED_5 0xb6
+#define LED_6 0xbe
+#define LED_7 0xe0
+#define LED_8 0xfe
+#define LED_9 0xf6
+#define LED_A 0xee
+#define LED_b 0x3e
+#define LED_C 0x9c
+#define LED_d 0x7a
+#define LED_E 0x9e
+#define LED_F 0x8e
+
+#ifndef __ASSEMBLY__
+
+static __inline__ void pica_set_led(unsigned int bits)
+{
+ volatile unsigned int *led_register = (unsigned int *) PICA_LED;
+
+ *led_register = bits;
+}
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * Base address of the Sonic Ethernet adapter in Jazz machines.
+ */
+#define JAZZ_ETHERNET_BASE 0xe0001000
+
+/*
+ * Base address of the 53C94 SCSI hostadapter in Jazz machines.
+ */
+#define JAZZ_SCSI_BASE 0xe0002000
+
+/*
+ * i8042 keyboard controller for JAZZ and PICA chipsets.
+ * This address is just a guess and seems to differ from
+ * other mips machines such as RC3xxx...
+ */
+#define JAZZ_KEYBOARD_ADDRESS 0xe0005000
+#define JAZZ_KEYBOARD_DATA 0xe0005000
+#define JAZZ_KEYBOARD_COMMAND 0xe0005001
+
+#ifndef __ASSEMBLY__
+
+typedef struct {
+ unsigned char data;
+ unsigned char command;
+} jazz_keyboard_hardware;
+
+#define jazz_kh ((keyboard_hardware *) JAZZ_KEYBOARD_ADDRESS)
+
+typedef struct {
+ unsigned char pad0[3];
+ unsigned char data;
+ unsigned char pad1[3];
+ unsigned char command;
+} mips_keyboard_hardware;
+
+/*
+ * For now. Needs to be changed for RC3xxx support. See below.
+ */
+#define keyboard_hardware jazz_keyboard_hardware
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * i8042 keyboard controller for most other Mips machines.
+ */
+#define MIPS_KEYBOARD_ADDRESS 0xb9005000
+#define MIPS_KEYBOARD_DATA 0xb9005003
+#define MIPS_KEYBOARD_COMMAND 0xb9005007
+
+/*
+ * Serial and parallel ports (WD 16C552) on the Mips JAZZ
+ */
+#define JAZZ_SERIAL1_BASE (unsigned int)0xe0006000
+#define JAZZ_SERIAL2_BASE (unsigned int)0xe0007000
+#define JAZZ_PARALLEL_BASE (unsigned int)0xe0008000
+
+/*
+ * Dummy Device Address. Used in jazzdma.c
+ */
+#define JAZZ_DUMMY_DEVICE 0xe000d000
+
+/*
+ * JAZZ timer registers and interrupt no.
+ * Note that the hardware timer interrupt is actually on
+ * cpu level 6, but to keep compatibility with PC stuff
+ * it is remapped to vector 0. See arch/mips/kernel/entry.S.
+ */
+#define JAZZ_TIMER_INTERVAL 0xe0000228
+#define JAZZ_TIMER_REGISTER 0xe0000230
+
+/*
+ * DRAM configuration register
+ */
+#ifndef __ASSEMBLY__
+#ifdef __MIPSEL__
+typedef struct {
+ unsigned int bank2 : 3;
+ unsigned int bank1 : 3;
+ unsigned int mem_bus_width : 1;
+ unsigned int reserved2 : 1;
+ unsigned int page_mode : 1;
+ unsigned int reserved1 : 23;
+} dram_configuration;
+#else /* defined (__MIPSEB__) */
+typedef struct {
+ unsigned int reserved1 : 23;
+ unsigned int page_mode : 1;
+ unsigned int reserved2 : 1;
+ unsigned int mem_bus_width : 1;
+ unsigned int bank1 : 3;
+ unsigned int bank2 : 3;
+} dram_configuration;
+#endif
+#endif /* !__ASSEMBLY__ */
+
+#define PICA_DRAM_CONFIG 0xe00fffe0
+
+/*
+ * JAZZ interrupt control registers
+ */
+#define JAZZ_IO_IRQ_SOURCE 0xe0010000
+#define JAZZ_IO_IRQ_ENABLE 0xe0010002
+
+/*
+ * JAZZ interrupt enable bits
+ */
+#define JAZZ_IE_PARALLEL (1 << 0)
+#define JAZZ_IE_FLOPPY (1 << 1)
+#define JAZZ_IE_SOUND (1 << 2)
+#define JAZZ_IE_VIDEO (1 << 3)
+#define JAZZ_IE_ETHERNET (1 << 4)
+#define JAZZ_IE_SCSI (1 << 5)
+#define JAZZ_IE_KEYBOARD (1 << 6)
+#define JAZZ_IE_MOUSE (1 << 7)
+#define JAZZ_IE_SERIAL1 (1 << 8)
+#define JAZZ_IE_SERIAL2 (1 << 9)
+
+/*
+ * JAZZ Interrupt Level definitions
+ *
+ * This is somewhat broken. For reasons which nobody can remember anymore
+ * we remap the Jazz interrupts to the usual ISA style interrupt numbers.
+ */
+#define JAZZ_PARALLEL_IRQ 16
+#define JAZZ_FLOPPY_IRQ 17
+#define JAZZ_SOUND_IRQ 18
+#define JAZZ_VIDEO_IRQ 19
+#define JAZZ_ETHERNET_IRQ 20
+#define JAZZ_SCSI_IRQ 21
+#define JAZZ_KEYBOARD_IRQ 22
+#define JAZZ_MOUSE_IRQ 23
+#define JAZZ_SERIAL1_IRQ 24
+#define JAZZ_SERIAL2_IRQ 25
+
+#define JAZZ_TIMER_IRQ 31
+
+
+/*
+ * JAZZ DMA Channels
+ * Note: Channels 4...7 are not used with respect to the Acer PICA-61
+ * chipset which does not provide these DMA channels.
+ */
+#define JAZZ_SCSI_DMA 0 /* SCSI */
+#define JAZZ_FLOPPY_DMA 1 /* FLOPPY */
+#define JAZZ_AUDIOL_DMA 2 /* AUDIO L */
+#define JAZZ_AUDIOR_DMA 3 /* AUDIO R */
+
+/*
+ * JAZZ R4030 MCT_ADR chip (DMA controller)
+ * Note: Virtual Addresses !
+ */
+#define JAZZ_R4030_CONFIG 0xE0000000 /* R4030 config register */
+#define JAZZ_R4030_REVISION 0xE0000008 /* same as PICA_ASIC_REVISION */
+#define JAZZ_R4030_INV_ADDR 0xE0000010 /* Invalid Address register */
+
+#define JAZZ_R4030_TRSTBL_BASE 0xE0000018 /* Translation Table Base */
+#define JAZZ_R4030_TRSTBL_LIM 0xE0000020 /* Translation Table Limit */
+#define JAZZ_R4030_TRSTBL_INV 0xE0000028 /* Translation Table Invalidate */
+
+#define JAZZ_R4030_CACHE_MTNC 0xE0000030 /* Cache Maintenance */
+#define JAZZ_R4030_R_FAIL_ADDR 0xE0000038 /* Remote Failed Address */
+#define JAZZ_R4030_M_FAIL_ADDR 0xE0000040 /* Memory Failed Address */
+
+#define JAZZ_R4030_CACHE_PTAG 0xE0000048 /* I/O Cache Physical Tag */
+#define JAZZ_R4030_CACHE_LTAG 0xE0000050 /* I/O Cache Logical Tag */
+#define JAZZ_R4030_CACHE_BMASK 0xE0000058 /* I/O Cache Byte Mask */
+#define JAZZ_R4030_CACHE_BWIN 0xE0000060 /* I/O Cache Buffer Window */
+
+/*
+ * Remote Speed Registers.
+ *
+ * 0: free, 1: Ethernet, 2: SCSI, 3: Floppy,
+ * 4: RTC, 5: Kb./Mouse 6: serial 1, 7: serial 2,
+ * 8: parallel, 9: NVRAM, 10: CPU, 11: PROM,
+ * 12: reserved, 13: free, 14: 7seg LED, 15: ???
+ */
+#define JAZZ_R4030_REM_SPEED 0xE0000070 /* 16 Remote Speed Registers */
+ /* 0xE0000070,78,80... 0xE00000E8 */
+#define JAZZ_R4030_IRQ_ENABLE 0xE00000E8 /* Internal Interrupt Enable */
+#define JAZZ_R4030_INVAL_ADDR 0xE0000010 /* Invalid address Register */
+#define JAZZ_R4030_IRQ_SOURCE 0xE0000200 /* Interrupt Source Register */
+#define JAZZ_R4030_I386_ERROR 0xE0000208 /* i386/EISA Bus Error */
+
+/*
+ * Virtual (E)ISA controller address
+ */
+#define JAZZ_EISA_IRQ_ACK 0xE0000238 /* EISA interrupt acknowledge */
+
+/*
+ * Access the R4030 DMA and I/O Controller
+ */
+#ifndef __ASSEMBLY__
+
+static inline void r4030_delay(void)
+{
+__asm__ __volatile__(
+ ".set\tnoreorder\n\t"
+ "nop\n\t"
+ "nop\n\t"
+ "nop\n\t"
+ "nop\n\t"
+ ".set\treorder");
+}
+
+static inline unsigned short r4030_read_reg16(unsigned long addr)
+{
+ unsigned short ret = *((volatile unsigned short *)addr);
+ r4030_delay();
+ return ret;
+}
+
+static inline unsigned int r4030_read_reg32(unsigned long addr)
+{
+ unsigned int ret = *((volatile unsigned int *)addr);
+ r4030_delay();
+ return ret;
+}
+
+static inline void r4030_write_reg16(unsigned long addr, unsigned val)
+{
+ *((volatile unsigned short *)addr) = val;
+ r4030_delay();
+}
+
+static inline void r4030_write_reg32(unsigned long addr, unsigned val)
+{
+ *((volatile unsigned int *)addr) = val;
+ r4030_delay();
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#define JAZZ_FDC_BASE 0xe0003000
+#define JAZZ_RTC_BASE 0xe0004000
+#define JAZZ_PORT_BASE 0xe2000000
+
+#define JAZZ_EISA_BASE 0xe3000000
+
+#endif /* __ASM_JAZZ_H */