[MIPS] Updated Sibyte headers

This is an update to the earlier patch for the sibyte headers, and superceeds
the previous patch.  Changes were necessary to get the tbprof driver working
on the bcm1480.

Patch to update Sibyte header files to match master versions maintained
at Broadcom.  This patch also corrects some whitespace problems, and
(hopefully) shouldn't introduce any new ones.

Signed-off-by: Mark Mason <mason@broadcom.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

1 files changed, 37 insertions, 9 deletions

diff --git a/include/asm-mips/sibyte/sb1250_regs.h b/include/asm-mips/sibyte/sb1250_regs.h
index bab3a4580a36..da7c188993c9 100644
--- a/include/asm-mips/sibyte/sb1250_regs.h
+++ b/include/asm-mips/sibyte/sb1250_regs.h
@@ -131,6 +131,7 @@
 
 #endif
 
+
 /*  *********************************************************************
     * PCI Interface Registers
     ********************************************************************* */
@@ -239,14 +240,14 @@
 #define R_MAC_VLANTAG                   0x00000110
 #define R_MAC_FRAMECFG                  0x00000118
 #define R_MAC_EOPCNT                    0x00000120
-#define R_MAC_FIFO_PTRS                 0x00000130
+#define R_MAC_FIFO_PTRS                 0x00000128
 #define R_MAC_ADFILTER_CFG              0x00000200
 #define R_MAC_ETHERNET_ADDR             0x00000208
 #define R_MAC_PKT_TYPE                  0x00000210
-#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
 #define R_MAC_ADMASK0			0x00000218
 #define R_MAC_ADMASK1			0x00000220
-#endif /* 1250 PASS3 || 112x PASS1 */
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
 #define R_MAC_HASH_BASE                 0x00000240
 #define R_MAC_ADDR_BASE                 0x00000280
 #define R_MAC_CHLO0_BASE                0x00000300
@@ -256,9 +257,9 @@
 #define R_MAC_INT_MASK                  0x00000410
 #define R_MAC_TXD_CTL                   0x00000420
 #define R_MAC_MDIO                      0x00000428
-#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
 #define R_MAC_STATUS1		        0x00000430
-#endif /* 1250 PASS2 || 112x PASS1 */
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
 #define R_MAC_DEBUG_STATUS              0x00000448
 
 #define MAC_HASH_COUNT			8
@@ -289,11 +290,11 @@
 #define R_DUART_RX_HOLD             0x160
 #define R_DUART_TX_HOLD             0x170
 
-#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
 #define R_DUART_FULL_CTL	    0x140
 #define R_DUART_OPCR_X		    0x180
 #define R_DUART_AUXCTL_X	    0x190
-#endif /* 1250 PASS2 || 112x PASS1 */
+#endif /* 1250 PASS2 || 112x PASS1 || 1480*/
 
 
 /*
@@ -308,6 +309,7 @@
 #define R_DUART_IMR_B               0x350
 #define R_DUART_OUT_PORT            0x360
 #define R_DUART_OPCR                0x370
+#define R_DUART_IN_PORT             0x380
 
 #define R_DUART_SET_OPR		    0x3B0
 #define R_DUART_CLEAR_OPR	    0x3C0
@@ -685,12 +687,17 @@
 #define A_ADDR_TRAP_REG_DEBUG	    0x0010020460
 #endif /* 1250 PASS2 || 112x PASS1 || 1480 */
 
+#define ADDR_TRAP_SPACING 8
+#define NUM_ADDR_TRAP 4
+#define A_ADDR_TRAP_UP(n) (A_ADDR_TRAP_UP_0 + ((n) * ADDR_TRAP_SPACING))
+#define A_ADDR_TRAP_DOWN(n) (A_ADDR_TRAP_DOWN_0 + ((n) * ADDR_TRAP_SPACING))
+#define A_ADDR_TRAP_CFG(n) (A_ADDR_TRAP_CFG_0 + ((n) * ADDR_TRAP_SPACING))
+
 
 /*  *********************************************************************
     * System Interrupt Mapper Registers
     ********************************************************************* */
 
-#if SIBYTE_HDR_FEATURE_1250_112x
 #define A_IMR_CPU0_BASE                 0x0010020000
 #define A_IMR_CPU1_BASE                 0x0010022000
 #define IMR_REGISTER_SPACING            0x2000
@@ -700,6 +707,7 @@
 #define A_IMR_REGISTER(cpu,reg) (A_IMR_MAPPER(cpu)+(reg))
 
 #define R_IMR_INTERRUPT_DIAG            0x0010
+#define R_IMR_INTERRUPT_LDT             0x0018
 #define R_IMR_INTERRUPT_MASK            0x0028
 #define R_IMR_INTERRUPT_TRACE           0x0038
 #define R_IMR_INTERRUPT_SOURCE_STATUS   0x0040
@@ -715,7 +723,14 @@
 #define R_IMR_INTERRUPT_STATUS_COUNT    7
 #define R_IMR_INTERRUPT_MAP_BASE        0x0200
 #define R_IMR_INTERRUPT_MAP_COUNT       64
-#endif	/* 1250/112x */
+
+/*
+ * these macros work together to build the address of a mailbox
+ * register, e.g., A_MAILBOX_REGISTER(R_IMR_MAILBOX_SET_CPU,1)
+ * for mbox_0_set_cpu2 returns 0x00100240C8
+ */
+#define A_MAILBOX_REGISTER(reg,cpu) \
+    (A_IMR_CPU0_BASE + (cpu * IMR_REGISTER_SPACING) + reg)
 
 /*  *********************************************************************
     * System Performance Counter Registers
@@ -727,6 +742,10 @@
 #define A_SCD_PERF_CNT_2            0x00100204E0
 #define A_SCD_PERF_CNT_3            0x00100204E8
 
+#define SCD_NUM_PERF_CNT 4
+#define SCD_PERF_CNT_SPACING 8
+#define A_SCD_PERF_CNT(n) (A_SCD_PERF_CNT_0+(n*SCD_PERF_CNT_SPACING))
+
 /*  *********************************************************************
     * System Bus Watcher Registers
     ********************************************************************* */
@@ -772,6 +791,15 @@
 #define A_SCD_TRACE_SEQUENCE_6      0x0010020A90
 #define A_SCD_TRACE_SEQUENCE_7      0x0010020A98
 
+#define TRACE_REGISTER_SPACING 8
+#define TRACE_NUM_REGISTERS    8
+#define A_SCD_TRACE_EVENT(n) (((n) & 4) ? \
+   (A_SCD_TRACE_EVENT_4 + (((n) & 3) * TRACE_REGISTER_SPACING)) : \
+   (A_SCD_TRACE_EVENT_0 + ((n) * TRACE_REGISTER_SPACING)))
+#define A_SCD_TRACE_SEQUENCE(n) (((n) & 4) ? \
+   (A_SCD_TRACE_SEQUENCE_4 + (((n) & 3) * TRACE_REGISTER_SPACING)) : \
+   (A_SCD_TRACE_SEQUENCE_0 + ((n) * TRACE_REGISTER_SPACING)))
+
 /*  *********************************************************************
     * System Generic DMA Registers
     ********************************************************************* */