diff options
author | Maciej W. Rozycki <macro@linux-mips.org> | 2007-07-17 04:03:50 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@woody.linux-foundation.org> | 2007-07-17 10:23:03 -0700 |
commit | b45d52797432bd6b5d9786dbda940eb8d0b9ed06 (patch) | |
tree | 1bc6d7961c37c5cab006976b90ab084a11f33457 /include/asm-mips/sibyte/sb1250_uart.h | |
parent | f9e86f419073605b4520848021cc042963c227c7 (diff) |
sb1250-duart.c: SB1250 DUART serial support
This is a driver for the SB1250 DUART, a dual serial port implementation
included in the Broadcom family of SOCs descending from the SiByte SB1250
MIPS64 chip multiprocessor. It is a new implementation replacing the
old-fashioned driver currently present in the linux-mips.org tree. It
supports all the usual features one would expect from a(n asynchronous)
serial driver, including modem line control (as far as hardware supports it
-- there is edge detection logic missing from the DCD and RI lines and the
driver does not implement polling of these lines at the moment), the serial
console, BREAK transmission and reception, including the magic SysRq. The
receive FIFO threshold is not maintained though.
The driver was tested with a SWARM board which uses a BCM1250 SOC (which is
dual MIPS64 CMP) and has both ports of the single DUART implemented wired
externally. Both were tested. Testing included using the ports as
terminal lines at 1200bps (which is the ports minimum), 115200bps and a
couple of random speeds inbetween. The modem lines were verified to
operate correctly. No testing was performed with a use as a network
interface, like with SLIP or PPP.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'include/asm-mips/sibyte/sb1250_uart.h')
-rw-r--r-- | include/asm-mips/sibyte/sb1250_uart.h | 7 |
1 files changed, 6 insertions, 1 deletions
diff --git a/include/asm-mips/sibyte/sb1250_uart.h b/include/asm-mips/sibyte/sb1250_uart.h index e87045e62bf0..cf74fedcbef1 100644 --- a/include/asm-mips/sibyte/sb1250_uart.h +++ b/include/asm-mips/sibyte/sb1250_uart.h @@ -75,7 +75,8 @@ #define V_DUART_PARITY_MODE_ADD_FIXED V_DUART_PARITY_MODE(K_DUART_PARITY_MODE_ADD_FIXED) #define V_DUART_PARITY_MODE_NONE V_DUART_PARITY_MODE(K_DUART_PARITY_MODE_NONE) -#define M_DUART_ERR_MODE _SB_MAKEMASK1(5) /* must be zero */ +#define M_DUART_TX_IRQ_SEL_TXRDY 0 +#define M_DUART_TX_IRQ_SEL_TXEMPT _SB_MAKEMASK1(5) #define M_DUART_RX_IRQ_SEL_RXRDY 0 #define M_DUART_RX_IRQ_SEL_RXFULL _SB_MAKEMASK1(6) @@ -246,10 +247,13 @@ #define M_DUART_ISR_BRK_A _SB_MAKEMASK1(2) #define M_DUART_ISR_IN_A _SB_MAKEMASK1(3) +#define M_DUART_ISR_ALL_A _SB_MAKEMASK(4,0) + #define M_DUART_ISR_TX_B _SB_MAKEMASK1(4) #define M_DUART_ISR_RX_B _SB_MAKEMASK1(5) #define M_DUART_ISR_BRK_B _SB_MAKEMASK1(6) #define M_DUART_ISR_IN_B _SB_MAKEMASK1(7) +#define M_DUART_ISR_ALL_B _SB_MAKEMASK(4,4) /* * DUART Channel A Interrupt Status Register (Table 10-17) @@ -262,6 +266,7 @@ #define M_DUART_ISR_RX _SB_MAKEMASK1(1) #define M_DUART_ISR_BRK _SB_MAKEMASK1(2) #define M_DUART_ISR_IN _SB_MAKEMASK1(3) +#define M_DUART_ISR_ALL _SB_MAKEMASK(4,0) #define M_DUART_ISR_RESERVED _SB_MAKEMASK(4,4) /* |