powerpc: Move include files to arch/powerpc/include/asm

from include/asm-powerpc.  This is the result of a

mkdir arch/powerpc/include/asm
git mv include/asm-powerpc/* arch/powerpc/include/asm

Followed by a few documentation/comment fixups and a couple of places
where <asm-powepc/...> was being used explicitly.  Of the latter only
one was outside the arch code and it is a driver only built for powerpc.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

1 files changed, 0 insertions, 121 deletions

diff --git a/include/asm-powerpc/tsi108.h b/include/asm-powerpc/tsi108.h
deleted file mode 100644
index f8b60793b7a9..000000000000
--- a/include/asm-powerpc/tsi108.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * common routine and memory layout for Tundra TSI108(Grendel) host bridge
- * memory controller.
- *
- * Author: Jacob Pan (jacob.pan@freescale.com)
- *	   Alex Bounine (alexandreb@tundra.com)
- *
- * Copyright 2004-2006 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef __PPC_KERNEL_TSI108_H
-#define __PPC_KERNEL_TSI108_H
-
-#include <asm/pci-bridge.h>
-
-/* Size of entire register space */
-#define TSI108_REG_SIZE		(0x10000)
-
-/* Sizes of register spaces for individual blocks */
-#define TSI108_HLP_SIZE		0x1000
-#define TSI108_PCI_SIZE		0x1000
-#define TSI108_CLK_SIZE		0x1000
-#define TSI108_PB_SIZE		0x1000
-#define TSI108_SD_SIZE		0x1000
-#define TSI108_DMA_SIZE		0x1000
-#define TSI108_ETH_SIZE		0x1000
-#define TSI108_I2C_SIZE		0x400
-#define TSI108_MPIC_SIZE	0x400
-#define TSI108_UART0_SIZE	0x200
-#define TSI108_GPIO_SIZE	0x200
-#define TSI108_UART1_SIZE	0x200
-
-/* Offsets within Tsi108(A) CSR space for individual blocks */
-#define TSI108_HLP_OFFSET	0x0000
-#define TSI108_PCI_OFFSET	0x1000
-#define TSI108_CLK_OFFSET	0x2000
-#define TSI108_PB_OFFSET	0x3000
-#define TSI108_SD_OFFSET	0x4000
-#define TSI108_DMA_OFFSET	0x5000
-#define TSI108_ETH_OFFSET	0x6000
-#define TSI108_I2C_OFFSET	0x7000
-#define TSI108_MPIC_OFFSET	0x7400
-#define TSI108_UART0_OFFSET	0x7800
-#define TSI108_GPIO_OFFSET	0x7A00
-#define TSI108_UART1_OFFSET	0x7C00
-
-/* Tsi108 registers used by common code components */
-#define TSI108_PCI_CSR		(0x004)
-#define TSI108_PCI_IRP_CFG_CTL	(0x180)
-#define TSI108_PCI_IRP_STAT	(0x184)
-#define TSI108_PCI_IRP_ENABLE	(0x188)
-#define TSI108_PCI_IRP_INTAD	(0x18C)
-
-#define TSI108_PCI_IRP_STAT_P_INT	(0x00400000)
-#define TSI108_PCI_IRP_ENABLE_P_INT	(0x00400000)
-
-#define TSI108_CG_PWRUP_STATUS	(0x234)
-
-#define TSI108_PB_ISR		(0x00C)
-#define TSI108_PB_ERRCS		(0x404)
-#define TSI108_PB_AERR		(0x408)
-
-#define TSI108_PB_ERRCS_ES		(1 << 1)
-#define TSI108_PB_ISR_PBS_RD_ERR	(1 << 8)
-
-#define TSI108_PCI_CFG_SIZE		(0x01000000)
-
-/*
- * PHY Configuration Options
- *
- * Specify "bcm54xx" in the compatible property of your device tree phy
- * nodes if your board uses the Broadcom PHYs
- */
-#define TSI108_PHY_MV88E	0	/* Marvel 88Exxxx PHY */
-#define TSI108_PHY_BCM54XX	1	/* Broardcom BCM54xx PHY */
-
-/* Global variables */
-
-extern u32 tsi108_pci_cfg_base;
-/* Exported functions */
-
-extern int tsi108_bridge_init(struct pci_controller *hose, uint phys_csr_base);
-extern unsigned long tsi108_get_mem_size(void);
-extern unsigned long tsi108_get_cpu_clk(void);
-extern unsigned long tsi108_get_sdc_clk(void);
-extern int tsi108_direct_write_config(struct pci_bus *bus, unsigned int devfn,
-				      int offset, int len, u32 val);
-extern int tsi108_direct_read_config(struct pci_bus *bus, unsigned int devfn,
-				     int offset, int len, u32 * val);
-extern void tsi108_clear_pci_error(u32 pci_cfg_base);
-
-extern phys_addr_t get_csrbase(void);
-
-typedef struct {
-	u32 regs;		/* hw registers base address */
-	u32 phyregs;		/* phy registers base address */
-	u16 phy;		/* phy address */
-	u16 irq_num;		/* irq number */
-	u8 mac_addr[6];		/* phy mac address */
-	u16 phy_type;	/* type of phy on board */
-} hw_info;
-
-extern u32 get_vir_csrbase(void);
-extern u32 tsi108_csr_vir_base;
-
-static inline u32 tsi108_read_reg(u32 reg_offset)
-{
-	return in_be32((volatile u32 *)(tsi108_csr_vir_base + reg_offset));
-}
-
-static inline void tsi108_write_reg(u32 reg_offset, u32 val)
-{
-	out_be32((volatile u32 *)(tsi108_csr_vir_base + reg_offset), val);
-}
-
-#endif				/* __PPC_KERNEL_TSI108_H */