Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 136 insertions, 0 deletions

diff --git a/include/asm-ppc/pci-bridge.h b/include/asm-ppc/pci-bridge.h
new file mode 100644
index 000000000000..78e9be619f14
--- /dev/null
+++ b/include/asm-ppc/pci-bridge.h
@@ -0,0 +1,136 @@
+#ifdef __KERNEL__
+#ifndef _ASM_PCI_BRIDGE_H
+#define _ASM_PCI_BRIDGE_H
+
+#include <linux/ioport.h>
+#include <linux/pci.h>
+
+struct device_node;
+struct pci_controller;
+
+/*
+ * pci_io_base returns the memory address at which you can access
+ * the I/O space for PCI bus number `bus' (or NULL on error).
+ */
+extern void *pci_bus_io_base(unsigned int bus);
+extern unsigned long pci_bus_io_base_phys(unsigned int bus);
+extern unsigned long pci_bus_mem_base_phys(unsigned int bus);
+
+/* Allocate a new PCI host bridge structure */
+extern struct pci_controller* pcibios_alloc_controller(void);
+
+/* Helper function for setting up resources */
+extern void pci_init_resource(struct resource *res, unsigned long start,
+			      unsigned long end, int flags, char *name);
+
+/* Get the PCI host controller for a bus */
+extern struct pci_controller* pci_bus_to_hose(int bus);
+
+/* Get the PCI host controller for an OF device */
+extern struct pci_controller*
+pci_find_hose_for_OF_device(struct device_node* node);
+
+/* Fill up host controller resources from the OF node */
+extern void
+pci_process_bridge_OF_ranges(struct pci_controller *hose,
+			   struct device_node *dev, int primary);
+
+/*
+ * Structure of a PCI controller (host bridge)
+ */
+struct pci_controller {
+	int index;			/* PCI domain number */
+	struct pci_controller *next;
+        struct pci_bus *bus;
+	void *arch_data;
+
+	int first_busno;
+	int last_busno;
+	int bus_offset;
+
+	void *io_base_virt;
+	unsigned long io_base_phys;
+
+	/* Some machines (PReP) have a non 1:1 mapping of
+	 * the PCI memory space in the CPU bus space
+	 */
+	unsigned long pci_mem_offset;
+
+	struct pci_ops *ops;
+	volatile unsigned int __iomem *cfg_addr;
+	volatile void __iomem *cfg_data;
+	/*
+	 * If set, indirect method will set the cfg_type bit as
+	 * needed to generate type 1 configuration transactions.
+	 */
+	int set_cfg_type;
+
+	/* Currently, we limit ourselves to 1 IO range and 3 mem
+	 * ranges since the common pci_bus structure can't handle more
+	 */
+	struct resource	io_resource;
+	struct resource mem_resources[3];
+	int mem_resource_count;
+
+	/* Host bridge I/O and Memory space
+	 * Used for BAR placement algorithms
+	 */
+	struct resource io_space;
+	struct resource mem_space;
+};
+
+/* These are used for config access before all the PCI probing
+   has been done. */
+int early_read_config_byte(struct pci_controller *hose, int bus, int dev_fn,
+			   int where, u8 *val);
+int early_read_config_word(struct pci_controller *hose, int bus, int dev_fn,
+			   int where, u16 *val);
+int early_read_config_dword(struct pci_controller *hose, int bus, int dev_fn,
+			    int where, u32 *val);
+int early_write_config_byte(struct pci_controller *hose, int bus, int dev_fn,
+			    int where, u8 val);
+int early_write_config_word(struct pci_controller *hose, int bus, int dev_fn,
+			    int where, u16 val);
+int early_write_config_dword(struct pci_controller *hose, int bus, int dev_fn,
+			     int where, u32 val);
+
+extern void setup_indirect_pci_nomap(struct pci_controller* hose,
+			       void __iomem *cfg_addr, void __iomem *cfg_data);
+extern void setup_indirect_pci(struct pci_controller* hose,
+			       u32 cfg_addr, u32 cfg_data);
+extern void setup_grackle(struct pci_controller *hose);
+
+extern unsigned char common_swizzle(struct pci_dev *, unsigned char *);
+
+/*
+ *   The following code swizzles for exactly one bridge.  The routine
+ *   common_swizzle below handles multiple bridges.  But there are a
+ *   some boards that don't follow the PCI spec's suggestion so we
+ *   break this piece out separately.
+ */
+static inline unsigned char bridge_swizzle(unsigned char pin,
+		unsigned char idsel)
+{
+	return (((pin-1) + idsel) % 4) + 1;
+}
+
+/*
+ * The following macro is used to lookup irqs in a standard table
+ * format for those PPC systems that do not already have PCI
+ * interrupts properly routed.
+ */
+/* FIXME - double check this */
+#define PCI_IRQ_TABLE_LOOKUP						    \
+({ long _ctl_ = -1; 							    \
+   if (idsel >= min_idsel && idsel <= max_idsel && pin <= irqs_per_slot)    \
+     _ctl_ = pci_irq_table[idsel - min_idsel][pin-1];			    \
+   _ctl_; })
+
+/*
+ * Scan the buses below a given PCI host bridge and assign suitable
+ * resources to all devices found.
+ */
+extern int pciauto_bus_scan(struct pci_controller *, int);
+
+#endif
+#endif /* __KERNEL__ */