sh: Add SH7785 Highlander board support (R7785RP).

This adds preliminary support for the SH7785-based Highlander board.
Some of the Highlander support code is reordered so that most of it
can be reused directly.

This also plugs in missing SH7785 checks in the places that need it,
as this is the first board to support the CPU.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

3 files changed, 57 insertions, 17 deletions

diff --git a/include/asm-sh/cpu-sh4/freq.h b/include/asm-sh/cpu-sh4/freq.h
index 602d061ca2dc..99402547ed06 100644
--- a/include/asm-sh/cpu-sh4/freq.h
+++ b/include/asm-sh/cpu-sh4/freq.h
@@ -14,6 +14,10 @@
 #define FRQCR		        0xa4150000
 #elif defined(CONFIG_CPU_SUBTYPE_SH7780)
 #define	FRQCR			0xffc80000
+#elif defined(CONFIG_CPU_SUBTYPE_SH7785)
+#define FRQCR0			0xffc80000
+#define FRQCR1			0xffc80004
+#define FRQMR1			0xffc80014
 #else
 #define FRQCR			0xffc00000
 #endif
diff --git a/include/asm-sh/pci.h b/include/asm-sh/pci.h
index 6ccc948fe216..b1f9a9e0231e 100644
--- a/include/asm-sh/pci.h
+++ b/include/asm-sh/pci.h
@@ -35,7 +35,7 @@ extern struct pci_channel board_pci_channels[];
 /*
  * I/O routine helpers
  */
-#ifdef CONFIG_CPU_SUBTYPE_SH7780
+#if defined(CONFIG_CPU_SUBTYPE_SH7780) || defined(CONFIG_CPU_SUBTYPE_SH7785)
 #define PCI_IO_AREA		0xFE400000
 #define PCI_IO_SIZE		0x00400000
 #else
diff --git a/include/asm-sh/r7780rp.h b/include/asm-sh/r7780rp.h
index c18f648a7995..8c0721965a5e 100644
--- a/include/asm-sh/r7780rp.h
+++ b/include/asm-sh/r7780rp.h
@@ -1,17 +1,11 @@
 #ifndef __ASM_SH_RENESAS_R7780RP_H
 #define __ASM_SH_RENESAS_R7780RP_H
 
-/*
- * linux/include/asm-sh/r7780rp.h
- *
- * Copyright (C) 2000  Atom Create Engineering Co., Ltd.
- *
- * Renesas Solutions Highlander R7780RP support
- */
-
 /* Box specific addresses.  */
 #if defined(CONFIG_SH_R7780MP)
 #define PA_BCR          0xa4000000      /* FPGA */
+#define PA_SDPOW	(-1)
+
 #define PA_IRLMSK       (PA_BCR+0x0000) /* Interrupt Mask control */
 #define PA_IRLMON       (PA_BCR+0x0002) /* Interrupt Status control */
 #define PA_IRLPRI1      (PA_BCR+0x0004) /* Interrupt Priorty 1 */
@@ -70,18 +64,12 @@
 #define PA_POFF         (PA_BCR+0x0800) /* System Power Off control */
 #define PA_PMR          (PA_BCR+0x0900) /*  */
 
-#define PA_AX88796L     0xa4100400      /* AX88796L Area */
-#define PA_SC1602BSLB   0xa6000000      /* SC1602BSLB Area */
-#define PA_IDE_OFFSET   0x1f0           /* CF IDE Offset */
-#define AX88796L_IO_BASE        0x1000  /* AX88796L IO Base Address */
-
 #define IRLCNTR1        (PA_BCR + 0)    /* Interrupt Control Register1 */
 
 #define IRQ_PCISLOT1    65              /* PCI Slot #1 IRQ */
 #define IRQ_PCISLOT2    66              /* PCI Slot #2 IRQ */
 #define IRQ_PCISLOT3    67              /* PCI Slot #3 IRQ */
 #define IRQ_PCISLOT4    68              /* PCI Slot #4 IRQ */
-// #define IRQ_CFINST   0               /* CF Card Insert IRQ */
 #define IRQ_TP          2               /* Touch Panel IRQ */
 #define IRQ_SCI1        3               /* SCI1 IRQ */
 #define IRQ_SCI0        4               /* SCI0 IRQ */
@@ -95,7 +83,7 @@
 #define IRQ_ONETH       13              /* On board Ethernet IRQ */
 #define IRQ_PSW         14              /* Push Switch IRQ */
 
-#else /* R7780RP */
+#elif defined(CONFIG_SH_R7780RP)
 
 #define PA_BCR		0xa5000000	/* FPGA */
 #define	PA_IRLMSK	(PA_BCR+0x0000)	/* Interrupt Mask control */
@@ -163,7 +151,55 @@
 #define IRQ_PSW		13		/* Push Switch IRQ */
 #define IRQ_ZIGBEE	14		/* Ziggbee IO IRQ */
 
-#endif  /* CONFIG_SH_R7780MP */
+#elif defined(CONFIG_SH_R7785RP)
+#define PA_BCR		0xa4000000	/* FPGA */
+#define PA_SDPOW	(-1)
+
+#define	PA_PCISCR	(PA_BCR+0x0000)
+#define PA_IRLPRA	(PA_BCR+0x0002)
+#define	PA_IRLPRB	(PA_BCR+0x0004)
+#define	PA_IRLPRC	(PA_BCR+0x0006)
+#define	PA_IRLPRD	(PA_BCR+0x0008)
+#define IRLCNTR1	(PA_BCR+0x0010)
+#define	PA_IRLPRE	(PA_BCR+0x000a)
+#define	PA_IRLPRF	(PA_BCR+0x000c)
+#define	PA_EXIRLCR	(PA_BCR+0x000e)
+#define	PA_IRLMCR1	(PA_BCR+0x0010)
+#define	PA_IRLMCR2	(PA_BCR+0x0012)
+#define	PA_IRLSSR1	(PA_BCR+0x0014)
+#define	PA_IRLSSR2	(PA_BCR+0x0016)
+#define PA_CFTCR	(PA_BCR+0x0100)
+#define PA_CFPCR	(PA_BCR+0x0102)
+#define PA_PCICR	(PA_BCR+0x0110)
+#define PA_IVDRCTL	(PA_BCR+0x0112)
+#define PA_IVDRSR	(PA_BCR+0x0114)
+#define PA_PDRSTCR	(PA_BCR+0x0116)
+#define PA_POFF		(PA_BCR+0x0120)
+#define PA_LCDCR	(PA_BCR+0x0130)
+#define PA_TPCR		(PA_BCR+0x0140)
+#define PA_TPCKCR	(PA_BCR+0x0142)
+#define PA_TPRSTR	(PA_BCR+0x0144)
+#define PA_TPXPDR	(PA_BCR+0x0146)
+#define PA_TPYPDR	(PA_BCR+0x0148)
+#define PA_GPIOPFR	(PA_BCR+0x0150)
+#define PA_GPIODR	(PA_BCR+0x0152)
+#define PA_OBLED	(PA_BCR+0x0154)
+#define PA_SWSR		(PA_BCR+0x0156)
+#define PA_VERREG	(PA_BCR+0x0158)
+#define PA_SMCR		(PA_BCR+0x0200)
+#define PA_SMSMADR	(PA_BCR+0x0202)
+#define PA_SMMR		(PA_BCR+0x0204)
+#define PA_SMSADR1	(PA_BCR+0x0206)
+#define PA_SMSADR32	(PA_BCR+0x0244)
+#define PA_SMTRDR1	(PA_BCR+0x0246)
+#define PA_SMTRDR16	(PA_BCR+0x0264)
+#define PA_CU3MDR	(PA_BCR+0x0300)
+#define PA_CU5MDR	(PA_BCR+0x0302)
+#define PA_MMSR		(PA_BCR+0x0400)
+#endif
+
+void make_r7780rp_irq(unsigned int irq);
+void highlander_init_irq(void);
 
 #define __IO_PREFIX	r7780rp
 #include <asm/io_generic.h>