bcma: add Broadcom specific AMBA bus driver

Broadcom has released cards based on a new AMBA-based bus type. From a
programming point of view, this new bus type differs from AMBA and does
not use AMBA common registers. It also differs enough from SSB. We
decided that a new bus driver is needed to keep the code clean.

In its current form, the driver detects devices present on the bus and
registers them in the system. It allows registering BCMA drivers for
specified bus devices and provides them basic operations. The bus driver
itself includes two important bus managing drivers: ChipCommon core
driver and PCI(c) core driver. They are early used to allow correct
initialization.

Currently code is limited to supporting buses on PCI(e) devices, however
the driver is designed to be used also on other hosts. The host
abstraction layer is implemented and already used for PCI(e).

Support for PCI(e) hosts is working and seems to be stable (access to
80211 core was tested successfully on a few devices). We can still
optimize it by using some fixed windows, but this can be done later
without affecting any external code. Windows are just ranges in MMIO
used for accessing cores on the bus.

Cc: Greg KH <greg@kroah.com>
Cc: Michael Büsch <mb@bu3sch.de>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: George Kashperko <george@znau.edu.ua>
Cc: Arend van Spriel <arend@broadcom.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Andy Botting <andy@andybotting.com>
Cc: linuxdriverproject <devel@linuxdriverproject.org>
Cc: linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

4 files changed, 644 insertions, 0 deletions

diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h
new file mode 100644
index 000000000000..08763e4e848f
--- /dev/null
+++ b/include/linux/bcma/bcma.h
@@ -0,0 +1,224 @@
+#ifndef LINUX_BCMA_H_
+#define LINUX_BCMA_H_
+
+#include <linux/pci.h>
+#include <linux/mod_devicetable.h>
+
+#include <linux/bcma/bcma_driver_chipcommon.h>
+#include <linux/bcma/bcma_driver_pci.h>
+
+#include "bcma_regs.h"
+
+struct bcma_device;
+struct bcma_bus;
+
+enum bcma_hosttype {
+	BCMA_HOSTTYPE_NONE,
+	BCMA_HOSTTYPE_PCI,
+	BCMA_HOSTTYPE_SDIO,
+};
+
+struct bcma_chipinfo {
+	u16 id;
+	u8 rev;
+	u8 pkg;
+};
+
+struct bcma_host_ops {
+	u8 (*read8)(struct bcma_device *core, u16 offset);
+	u16 (*read16)(struct bcma_device *core, u16 offset);
+	u32 (*read32)(struct bcma_device *core, u16 offset);
+	void (*write8)(struct bcma_device *core, u16 offset, u8 value);
+	void (*write16)(struct bcma_device *core, u16 offset, u16 value);
+	void (*write32)(struct bcma_device *core, u16 offset, u32 value);
+	/* Agent ops */
+	u32 (*aread32)(struct bcma_device *core, u16 offset);
+	void (*awrite32)(struct bcma_device *core, u16 offset, u32 value);
+};
+
+/* Core manufacturers */
+#define BCMA_MANUF_ARM			0x43B
+#define BCMA_MANUF_MIPS			0x4A7
+#define BCMA_MANUF_BCM			0x4BF
+
+/* Core class values. */
+#define BCMA_CL_SIM			0x0
+#define BCMA_CL_EROM			0x1
+#define BCMA_CL_CORESIGHT		0x9
+#define BCMA_CL_VERIF			0xB
+#define BCMA_CL_OPTIMO			0xD
+#define BCMA_CL_GEN			0xE
+#define BCMA_CL_PRIMECELL		0xF
+
+/* Core-ID values. */
+#define BCMA_CORE_OOB_ROUTER		0x367	/* Out of band */
+#define BCMA_CORE_INVALID		0x700
+#define BCMA_CORE_CHIPCOMMON		0x800
+#define BCMA_CORE_ILINE20		0x801
+#define BCMA_CORE_SRAM			0x802
+#define BCMA_CORE_SDRAM			0x803
+#define BCMA_CORE_PCI			0x804
+#define BCMA_CORE_MIPS			0x805
+#define BCMA_CORE_ETHERNET		0x806
+#define BCMA_CORE_V90			0x807
+#define BCMA_CORE_USB11_HOSTDEV		0x808
+#define BCMA_CORE_ADSL			0x809
+#define BCMA_CORE_ILINE100		0x80A
+#define BCMA_CORE_IPSEC			0x80B
+#define BCMA_CORE_UTOPIA		0x80C
+#define BCMA_CORE_PCMCIA		0x80D
+#define BCMA_CORE_INTERNAL_MEM		0x80E
+#define BCMA_CORE_MEMC_SDRAM		0x80F
+#define BCMA_CORE_OFDM			0x810
+#define BCMA_CORE_EXTIF			0x811
+#define BCMA_CORE_80211			0x812
+#define BCMA_CORE_PHY_A			0x813
+#define BCMA_CORE_PHY_B			0x814
+#define BCMA_CORE_PHY_G			0x815
+#define BCMA_CORE_MIPS_3302		0x816
+#define BCMA_CORE_USB11_HOST		0x817
+#define BCMA_CORE_USB11_DEV		0x818
+#define BCMA_CORE_USB20_HOST		0x819
+#define BCMA_CORE_USB20_DEV		0x81A
+#define BCMA_CORE_SDIO_HOST		0x81B
+#define BCMA_CORE_ROBOSWITCH		0x81C
+#define BCMA_CORE_PARA_ATA		0x81D
+#define BCMA_CORE_SATA_XORDMA		0x81E
+#define BCMA_CORE_ETHERNET_GBIT		0x81F
+#define BCMA_CORE_PCIE			0x820
+#define BCMA_CORE_PHY_N			0x821
+#define BCMA_CORE_SRAM_CTL		0x822
+#define BCMA_CORE_MINI_MACPHY		0x823
+#define BCMA_CORE_ARM_1176		0x824
+#define BCMA_CORE_ARM_7TDMI		0x825
+#define BCMA_CORE_PHY_LP		0x826
+#define BCMA_CORE_PMU			0x827
+#define BCMA_CORE_PHY_SSN		0x828
+#define BCMA_CORE_SDIO_DEV		0x829
+#define BCMA_CORE_ARM_CM3		0x82A
+#define BCMA_CORE_PHY_HT		0x82B
+#define BCMA_CORE_MIPS_74K		0x82C
+#define BCMA_CORE_MAC_GBIT		0x82D
+#define BCMA_CORE_DDR12_MEM_CTL		0x82E
+#define BCMA_CORE_PCIE_RC		0x82F	/* PCIe Root Complex */
+#define BCMA_CORE_OCP_OCP_BRIDGE	0x830
+#define BCMA_CORE_SHARED_COMMON		0x831
+#define BCMA_CORE_OCP_AHB_BRIDGE	0x832
+#define BCMA_CORE_SPI_HOST		0x833
+#define BCMA_CORE_I2S			0x834
+#define BCMA_CORE_SDR_DDR1_MEM_CTL	0x835	/* SDR/DDR1 memory controller core */
+#define BCMA_CORE_SHIM			0x837	/* SHIM component in ubus/6362 */
+#define BCMA_CORE_DEFAULT		0xFFF
+
+#define BCMA_MAX_NR_CORES		16
+
+struct bcma_device {
+	struct bcma_bus *bus;
+	struct bcma_device_id id;
+
+	struct device dev;
+	bool dev_registered;
+
+	u8 core_index;
+
+	u32 addr;
+	u32 wrap;
+
+	void *drvdata;
+	struct list_head list;
+};
+
+static inline void *bcma_get_drvdata(struct bcma_device *core)
+{
+	return core->drvdata;
+}
+static inline void bcma_set_drvdata(struct bcma_device *core, void *drvdata)
+{
+	core->drvdata = drvdata;
+}
+
+struct bcma_driver {
+	const char *name;
+	const struct bcma_device_id *id_table;
+
+	int (*probe)(struct bcma_device *dev);
+	void (*remove)(struct bcma_device *dev);
+	int (*suspend)(struct bcma_device *dev, pm_message_t state);
+	int (*resume)(struct bcma_device *dev);
+	void (*shutdown)(struct bcma_device *dev);
+
+	struct device_driver drv;
+};
+extern
+int __bcma_driver_register(struct bcma_driver *drv, struct module *owner);
+static inline int bcma_driver_register(struct bcma_driver *drv)
+{
+	return __bcma_driver_register(drv, THIS_MODULE);
+}
+extern void bcma_driver_unregister(struct bcma_driver *drv);
+
+struct bcma_bus {
+	/* The MMIO area. */
+	void __iomem *mmio;
+
+	const struct bcma_host_ops *ops;
+
+	enum bcma_hosttype hosttype;
+	union {
+		/* Pointer to the PCI bus (only for BCMA_HOSTTYPE_PCI) */
+		struct pci_dev *host_pci;
+		/* Pointer to the SDIO device (only for BCMA_HOSTTYPE_SDIO) */
+		struct sdio_func *host_sdio;
+	};
+
+	struct bcma_chipinfo chipinfo;
+
+	struct bcma_device *mapped_core;
+	struct list_head cores;
+	u8 nr_cores;
+
+	struct bcma_drv_cc drv_cc;
+	struct bcma_drv_pci drv_pci;
+};
+
+extern inline u32 bcma_read8(struct bcma_device *core, u16 offset)
+{
+	return core->bus->ops->read8(core, offset);
+}
+extern inline u32 bcma_read16(struct bcma_device *core, u16 offset)
+{
+	return core->bus->ops->read16(core, offset);
+}
+extern inline u32 bcma_read32(struct bcma_device *core, u16 offset)
+{
+	return core->bus->ops->read32(core, offset);
+}
+extern inline
+void bcma_write8(struct bcma_device *core, u16 offset, u32 value)
+{
+	core->bus->ops->write8(core, offset, value);
+}
+extern inline
+void bcma_write16(struct bcma_device *core, u16 offset, u32 value)
+{
+	core->bus->ops->write16(core, offset, value);
+}
+extern inline
+void bcma_write32(struct bcma_device *core, u16 offset, u32 value)
+{
+	core->bus->ops->write32(core, offset, value);
+}
+extern inline u32 bcma_aread32(struct bcma_device *core, u16 offset)
+{
+	return core->bus->ops->aread32(core, offset);
+}
+extern inline
+void bcma_awrite32(struct bcma_device *core, u16 offset, u32 value)
+{
+	core->bus->ops->awrite32(core, offset, value);
+}
+
+extern bool bcma_core_is_enabled(struct bcma_device *core);
+extern int bcma_core_enable(struct bcma_device *core, u32 flags);
+
+#endif /* LINUX_BCMA_H_ */
diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h
new file mode 100644
index 000000000000..4f8fd6a4c1e6
--- /dev/null
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
@@ -0,0 +1,297 @@
+#ifndef LINUX_BCMA_DRIVER_CC_H_
+#define LINUX_BCMA_DRIVER_CC_H_
+
+/** ChipCommon core registers. **/
+#define BCMA_CC_ID			0x0000
+#define  BCMA_CC_ID_ID			0x0000FFFF
+#define  BCMA_CC_ID_ID_SHIFT		0
+#define  BCMA_CC_ID_REV			0x000F0000
+#define  BCMA_CC_ID_REV_SHIFT		16
+#define  BCMA_CC_ID_PKG			0x00F00000
+#define  BCMA_CC_ID_PKG_SHIFT		20
+#define  BCMA_CC_ID_NRCORES		0x0F000000
+#define  BCMA_CC_ID_NRCORES_SHIFT	24
+#define  BCMA_CC_ID_TYPE		0xF0000000
+#define  BCMA_CC_ID_TYPE_SHIFT		28
+#define BCMA_CC_CAP			0x0004		/* Capabilities */
+#define  BCMA_CC_CAP_NRUART		0x00000003	/* # of UARTs */
+#define  BCMA_CC_CAP_MIPSEB		0x00000004	/* MIPS in BigEndian Mode */
+#define  BCMA_CC_CAP_UARTCLK		0x00000018	/* UART clock select */
+#define   BCMA_CC_CAP_UARTCLK_INT	0x00000008	/* UARTs are driven by internal divided clock */
+#define  BCMA_CC_CAP_UARTGPIO		0x00000020	/* UARTs on GPIO 15-12 */
+#define  BCMA_CC_CAP_EXTBUS		0x000000C0	/* External buses present */
+#define  BCMA_CC_CAP_FLASHT		0x00000700	/* Flash Type */
+#define   BCMA_CC_FLASHT_NONE		0x00000000	/* No flash */
+#define   BCMA_CC_FLASHT_STSER		0x00000100	/* ST serial flash */
+#define   BCMA_CC_FLASHT_ATSER		0x00000200	/* Atmel serial flash */
+#define	  BCMA_CC_FLASHT_PARA		0x00000700	/* Parallel flash */
+#define  BCMA_CC_CAP_PLLT		0x00038000	/* PLL Type */
+#define   BCMA_PLLTYPE_NONE		0x00000000
+#define   BCMA_PLLTYPE_1		0x00010000	/* 48Mhz base, 3 dividers */
+#define   BCMA_PLLTYPE_2		0x00020000	/* 48Mhz, 4 dividers */
+#define   BCMA_PLLTYPE_3		0x00030000	/* 25Mhz, 2 dividers */
+#define   BCMA_PLLTYPE_4		0x00008000	/* 48Mhz, 4 dividers */
+#define   BCMA_PLLTYPE_5		0x00018000	/* 25Mhz, 4 dividers */
+#define   BCMA_PLLTYPE_6		0x00028000	/* 100/200 or 120/240 only */
+#define   BCMA_PLLTYPE_7		0x00038000	/* 25Mhz, 4 dividers */
+#define  BCMA_CC_CAP_PCTL		0x00040000	/* Power Control */
+#define  BCMA_CC_CAP_OTPS		0x00380000	/* OTP size */
+#define  BCMA_CC_CAP_OTPS_SHIFT		19
+#define  BCMA_CC_CAP_OTPS_BASE		5
+#define  BCMA_CC_CAP_JTAGM		0x00400000	/* JTAG master present */
+#define  BCMA_CC_CAP_BROM		0x00800000	/* Internal boot ROM active */
+#define  BCMA_CC_CAP_64BIT		0x08000000	/* 64-bit Backplane */
+#define  BCMA_CC_CAP_PMU		0x10000000	/* PMU available (rev >= 20) */
+#define  BCMA_CC_CAP_ECI		0x20000000	/* ECI available (rev >= 20) */
+#define  BCMA_CC_CAP_SPROM		0x40000000	/* SPROM present */
+#define BCMA_CC_CORECTL			0x0008
+#define  BCMA_CC_CORECTL_UARTCLK0	0x00000001	/* Drive UART with internal clock */
+#define	 BCMA_CC_CORECTL_SE		0x00000002	/* sync clk out enable (corerev >= 3) */
+#define  BCMA_CC_CORECTL_UARTCLKEN	0x00000008	/* UART clock enable (rev >= 21) */
+#define BCMA_CC_BIST			0x000C
+#define BCMA_CC_OTPS			0x0010		/* OTP status */
+#define	 BCMA_CC_OTPS_PROGFAIL		0x80000000
+#define	 BCMA_CC_OTPS_PROTECT		0x00000007
+#define	 BCMA_CC_OTPS_HW_PROTECT	0x00000001
+#define	 BCMA_CC_OTPS_SW_PROTECT	0x00000002
+#define	 BCMA_CC_OTPS_CID_PROTECT	0x00000004
+#define BCMA_CC_OTPC			0x0014		/* OTP control */
+#define	 BCMA_CC_OTPC_RECWAIT		0xFF000000
+#define	 BCMA_CC_OTPC_PROGWAIT		0x00FFFF00
+#define	 BCMA_CC_OTPC_PRW_SHIFT		8
+#define	 BCMA_CC_OTPC_MAXFAIL		0x00000038
+#define	 BCMA_CC_OTPC_VSEL		0x00000006
+#define	 BCMA_CC_OTPC_SELVL		0x00000001
+#define BCMA_CC_OTPP			0x0018		/* OTP prog */
+#define	 BCMA_CC_OTPP_COL		0x000000FF
+#define	 BCMA_CC_OTPP_ROW		0x0000FF00
+#define	 BCMA_CC_OTPP_ROW_SHIFT		8
+#define	 BCMA_CC_OTPP_READERR		0x10000000
+#define	 BCMA_CC_OTPP_VALUE		0x20000000
+#define	 BCMA_CC_OTPP_READ		0x40000000
+#define	 BCMA_CC_OTPP_START		0x80000000
+#define	 BCMA_CC_OTPP_BUSY		0x80000000
+#define BCMA_CC_IRQSTAT			0x0020
+#define BCMA_CC_IRQMASK			0x0024
+#define	 BCMA_CC_IRQ_GPIO		0x00000001	/* gpio intr */
+#define	 BCMA_CC_IRQ_EXT		0x00000002	/* ro: ext intr pin (corerev >= 3) */
+#define	 BCMA_CC_IRQ_WDRESET		0x80000000	/* watchdog reset occurred */
+#define BCMA_CC_CHIPCTL			0x0028		/* Rev >= 11 only */
+#define BCMA_CC_CHIPSTAT		0x002C		/* Rev >= 11 only */
+#define BCMA_CC_JCMD			0x0030		/* Rev >= 10 only */
+#define  BCMA_CC_JCMD_START		0x80000000
+#define  BCMA_CC_JCMD_BUSY		0x80000000
+#define  BCMA_CC_JCMD_PAUSE		0x40000000
+#define  BCMA_CC_JCMD0_ACC_MASK		0x0000F000
+#define  BCMA_CC_JCMD0_ACC_IRDR		0x00000000
+#define  BCMA_CC_JCMD0_ACC_DR		0x00001000
+#define  BCMA_CC_JCMD0_ACC_IR		0x00002000
+#define  BCMA_CC_JCMD0_ACC_RESET	0x00003000
+#define  BCMA_CC_JCMD0_ACC_IRPDR	0x00004000
+#define  BCMA_CC_JCMD0_ACC_PDR		0x00005000
+#define  BCMA_CC_JCMD0_IRW_MASK		0x00000F00
+#define  BCMA_CC_JCMD_ACC_MASK		0x000F0000	/* Changes for corerev 11 */
+#define  BCMA_CC_JCMD_ACC_IRDR		0x00000000
+#define  BCMA_CC_JCMD_ACC_DR		0x00010000
+#define  BCMA_CC_JCMD_ACC_IR		0x00020000
+#define  BCMA_CC_JCMD_ACC_RESET		0x00030000
+#define  BCMA_CC_JCMD_ACC_IRPDR		0x00040000
+#define  BCMA_CC_JCMD_ACC_PDR		0x00050000
+#define  BCMA_CC_JCMD_IRW_MASK		0x00001F00
+#define  BCMA_CC_JCMD_IRW_SHIFT		8
+#define  BCMA_CC_JCMD_DRW_MASK		0x0000003F
+#define BCMA_CC_JIR			0x0034		/* Rev >= 10 only */
+#define BCMA_CC_JDR			0x0038		/* Rev >= 10 only */
+#define BCMA_CC_JCTL			0x003C		/* Rev >= 10 only */
+#define  BCMA_CC_JCTL_FORCE_CLK		4		/* Force clock */
+#define  BCMA_CC_JCTL_EXT_EN		2		/* Enable external targets */
+#define  BCMA_CC_JCTL_EN		1		/* Enable Jtag master */
+#define BCMA_CC_FLASHCTL		0x0040
+#define  BCMA_CC_FLASHCTL_START		0x80000000
+#define  BCMA_CC_FLASHCTL_BUSY		BCMA_CC_FLASHCTL_START
+#define BCMA_CC_FLASHADDR		0x0044
+#define BCMA_CC_FLASHDATA		0x0048
+#define BCMA_CC_BCAST_ADDR		0x0050
+#define BCMA_CC_BCAST_DATA		0x0054
+#define BCMA_CC_GPIOIN			0x0060
+#define BCMA_CC_GPIOOUT			0x0064
+#define BCMA_CC_GPIOOUTEN		0x0068
+#define BCMA_CC_GPIOCTL			0x006C
+#define BCMA_CC_GPIOPOL			0x0070
+#define BCMA_CC_GPIOIRQ			0x0074
+#define BCMA_CC_WATCHDOG		0x0080
+#define BCMA_CC_GPIOTIMER		0x0088		/* LED powersave (corerev >= 16) */
+#define  BCMA_CC_GPIOTIMER_ONTIME_SHIFT	16
+#define BCMA_CC_GPIOTOUTM		0x008C		/* LED powersave (corerev >= 16) */
+#define BCMA_CC_CLOCK_N			0x0090
+#define BCMA_CC_CLOCK_SB		0x0094
+#define BCMA_CC_CLOCK_PCI		0x0098
+#define BCMA_CC_CLOCK_M2		0x009C
+#define BCMA_CC_CLOCK_MIPS		0x00A0
+#define BCMA_CC_CLKDIV			0x00A4		/* Rev >= 3 only */
+#define	 BCMA_CC_CLKDIV_SFLASH		0x0F000000
+#define	 BCMA_CC_CLKDIV_SFLASH_SHIFT	24
+#define	 BCMA_CC_CLKDIV_OTP		0x000F0000
+#define	 BCMA_CC_CLKDIV_OTP_SHIFT	16
+#define	 BCMA_CC_CLKDIV_JTAG		0x00000F00
+#define	 BCMA_CC_CLKDIV_JTAG_SHIFT	8
+#define	 BCMA_CC_CLKDIV_UART		0x000000FF
+#define BCMA_CC_CAP_EXT			0x00AC		/* Capabilities */
+#define BCMA_CC_PLLONDELAY		0x00B0		/* Rev >= 4 only */
+#define BCMA_CC_FREFSELDELAY		0x00B4		/* Rev >= 4 only */
+#define BCMA_CC_SLOWCLKCTL		0x00B8		/* 6 <= Rev <= 9 only */
+#define  BCMA_CC_SLOWCLKCTL_SRC		0x00000007	/* slow clock source mask */
+#define	  BCMA_CC_SLOWCLKCTL_SRC_LPO	0x00000000	/* source of slow clock is LPO */
+#define   BCMA_CC_SLOWCLKCTL_SRC_XTAL	0x00000001	/* source of slow clock is crystal */
+#define	  BCMA_CC_SLOECLKCTL_SRC_PCI	0x00000002	/* source of slow clock is PCI */
+#define  BCMA_CC_SLOWCLKCTL_LPOFREQ	0x00000200	/* LPOFreqSel, 1: 160Khz, 0: 32KHz */
+#define  BCMA_CC_SLOWCLKCTL_LPOPD	0x00000400	/* LPOPowerDown, 1: LPO is disabled, 0: LPO is enabled */
+#define  BCMA_CC_SLOWCLKCTL_FSLOW	0x00000800	/* ForceSlowClk, 1: sb/cores running on slow clock, 0: power logic control */
+#define  BCMA_CC_SLOWCLKCTL_IPLL	0x00001000	/* IgnorePllOffReq, 1/0: power logic ignores/honors PLL clock disable requests from core */
+#define  BCMA_CC_SLOWCLKCTL_ENXTAL	0x00002000	/* XtalControlEn, 1/0: power logic does/doesn't disable crystal when appropriate */
+#define  BCMA_CC_SLOWCLKCTL_XTALPU	0x00004000	/* XtalPU (RO), 1/0: crystal running/disabled */
+#define  BCMA_CC_SLOWCLKCTL_CLKDIV	0xFFFF0000	/* ClockDivider (SlowClk = 1/(4+divisor)) */
+#define  BCMA_CC_SLOWCLKCTL_CLKDIV_SHIFT	16
+#define BCMA_CC_SYSCLKCTL		0x00C0		/* Rev >= 3 only */
+#define	 BCMA_CC_SYSCLKCTL_IDLPEN	0x00000001	/* ILPen: Enable Idle Low Power */
+#define	 BCMA_CC_SYSCLKCTL_ALPEN	0x00000002	/* ALPen: Enable Active Low Power */
+#define	 BCMA_CC_SYSCLKCTL_PLLEN	0x00000004	/* ForcePLLOn */
+#define	 BCMA_CC_SYSCLKCTL_FORCEALP	0x00000008	/* Force ALP (or HT if ALPen is not set */
+#define	 BCMA_CC_SYSCLKCTL_FORCEHT	0x00000010	/* Force HT */
+#define  BCMA_CC_SYSCLKCTL_CLKDIV	0xFFFF0000	/* ClkDiv  (ILP = 1/(4+divisor)) */
+#define  BCMA_CC_SYSCLKCTL_CLKDIV_SHIFT	16
+#define BCMA_CC_CLKSTSTR		0x00C4		/* Rev >= 3 only */
+#define BCMA_CC_EROM			0x00FC
+#define BCMA_CC_PCMCIA_CFG		0x0100
+#define BCMA_CC_PCMCIA_MEMWAIT		0x0104
+#define BCMA_CC_PCMCIA_ATTRWAIT		0x0108
+#define BCMA_CC_PCMCIA_IOWAIT		0x010C
+#define BCMA_CC_IDE_CFG			0x0110
+#define BCMA_CC_IDE_MEMWAIT		0x0114
+#define BCMA_CC_IDE_ATTRWAIT		0x0118
+#define BCMA_CC_IDE_IOWAIT		0x011C
+#define BCMA_CC_PROG_CFG		0x0120
+#define BCMA_CC_PROG_WAITCNT		0x0124
+#define BCMA_CC_FLASH_CFG		0x0128
+#define BCMA_CC_FLASH_WAITCNT		0x012C
+#define BCMA_CC_CLKCTLST		0x01E0 /* Clock control and status (rev >= 20) */
+#define  BCMA_CC_CLKCTLST_FORCEALP	0x00000001 /* Force ALP request */
+#define  BCMA_CC_CLKCTLST_FORCEHT	0x00000002 /* Force HT request */
+#define  BCMA_CC_CLKCTLST_FORCEILP	0x00000004 /* Force ILP request */
+#define  BCMA_CC_CLKCTLST_HAVEALPREQ	0x00000008 /* ALP available request */
+#define  BCMA_CC_CLKCTLST_HAVEHTREQ	0x00000010 /* HT available request */
+#define  BCMA_CC_CLKCTLST_HWCROFF	0x00000020 /* Force HW clock request off */
+#define  BCMA_CC_CLKCTLST_HAVEHT	0x00010000 /* HT available */
+#define  BCMA_CC_CLKCTLST_HAVEALP	0x00020000 /* APL available */
+#define BCMA_CC_HW_WORKAROUND		0x01E4 /* Hardware workaround (rev >= 20) */
+#define BCMA_CC_UART0_DATA		0x0300
+#define BCMA_CC_UART0_IMR		0x0304
+#define BCMA_CC_UART0_FCR		0x0308
+#define BCMA_CC_UART0_LCR		0x030C
+#define BCMA_CC_UART0_MCR		0x0310
+#define BCMA_CC_UART0_LSR		0x0314
+#define BCMA_CC_UART0_MSR		0x0318
+#define BCMA_CC_UART0_SCRATCH		0x031C
+#define BCMA_CC_UART1_DATA		0x0400
+#define BCMA_CC_UART1_IMR		0x0404
+#define BCMA_CC_UART1_FCR		0x0408
+#define BCMA_CC_UART1_LCR		0x040C
+#define BCMA_CC_UART1_MCR		0x0410
+#define BCMA_CC_UART1_LSR		0x0414
+#define BCMA_CC_UART1_MSR		0x0418
+#define BCMA_CC_UART1_SCRATCH		0x041C
+/* PMU registers (rev >= 20) */
+#define BCMA_CC_PMU_CTL			0x0600 /* PMU control */
+#define  BCMA_CC_PMU_CTL_ILP_DIV	0xFFFF0000 /* ILP div mask */
+#define  BCMA_CC_PMU_CTL_ILP_DIV_SHIFT	16
+#define  BCMA_CC_PMU_CTL_NOILPONW	0x00000200 /* No ILP on wait */
+#define  BCMA_CC_PMU_CTL_HTREQEN	0x00000100 /* HT req enable */
+#define  BCMA_CC_PMU_CTL_ALPREQEN	0x00000080 /* ALP req enable */
+#define  BCMA_CC_PMU_CTL_XTALFREQ	0x0000007C /* Crystal freq */
+#define  BCMA_CC_PMU_CTL_XTALFREQ_SHIFT	2
+#define  BCMA_CC_PMU_CTL_ILPDIVEN	0x00000002 /* ILP div enable */
+#define  BCMA_CC_PMU_CTL_LPOSEL		0x00000001 /* LPO sel */
+#define BCMA_CC_PMU_CAP			0x0604 /* PMU capabilities */
+#define  BCMA_CC_PMU_CAP_REVISION	0x000000FF /* Revision mask */
+#define BCMA_CC_PMU_STAT		0x0608 /* PMU status */
+#define  BCMA_CC_PMU_STAT_INTPEND	0x00000040 /* Interrupt pending */
+#define  BCMA_CC_PMU_STAT_SBCLKST	0x00000030 /* Backplane clock status? */
+#define  BCMA_CC_PMU_STAT_HAVEALP	0x00000008 /* ALP available */
+#define  BCMA_CC_PMU_STAT_HAVEHT	0x00000004 /* HT available */
+#define  BCMA_CC_PMU_STAT_RESINIT	0x00000003 /* Res init */
+#define BCMA_CC_PMU_RES_STAT		0x060C /* PMU res status */
+#define BCMA_CC_PMU_RES_PEND		0x0610 /* PMU res pending */
+#define BCMA_CC_PMU_TIMER		0x0614 /* PMU timer */
+#define BCMA_CC_PMU_MINRES_MSK		0x0618 /* PMU min res mask */
+#define BCMA_CC_PMU_MAXRES_MSK		0x061C /* PMU max res mask */
+#define BCMA_CC_PMU_RES_TABSEL		0x0620 /* PMU res table sel */
+#define BCMA_CC_PMU_RES_DEPMSK		0x0624 /* PMU res dep mask */
+#define BCMA_CC_PMU_RES_UPDNTM		0x0628 /* PMU res updown timer */
+#define BCMA_CC_PMU_RES_TIMER		0x062C /* PMU res timer */
+#define BCMA_CC_PMU_CLKSTRETCH		0x0630 /* PMU clockstretch */
+#define BCMA_CC_PMU_WATCHDOG		0x0634 /* PMU watchdog */
+#define BCMA_CC_PMU_RES_REQTS		0x0640 /* PMU res req timer sel */
+#define BCMA_CC_PMU_RES_REQT		0x0644 /* PMU res req timer */
+#define BCMA_CC_PMU_RES_REQM		0x0648 /* PMU res req mask */
+#define BCMA_CC_CHIPCTL_ADDR		0x0650
+#define BCMA_CC_CHIPCTL_DATA		0x0654
+#define BCMA_CC_REGCTL_ADDR		0x0658
+#define BCMA_CC_REGCTL_DATA		0x065C
+#define BCMA_CC_PLLCTL_ADDR		0x0660
+#define BCMA_CC_PLLCTL_DATA		0x0664
+
+/* Data for the PMU, if available.
+ * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU)
+ */
+struct bcma_chipcommon_pmu {
+	u8 rev;			/* PMU revision */
+	u32 crystalfreq;	/* The active crystal frequency (in kHz) */
+};
+
+struct bcma_drv_cc {
+	struct bcma_device *core;
+	u32 status;
+	u32 capabilities;
+	u32 capabilities_ext;
+	/* Fast Powerup Delay constant */
+	u16 fast_pwrup_delay;
+	struct bcma_chipcommon_pmu pmu;
+};
+
+/* Register access */
+#define bcma_cc_read32(cc, offset) \
+	bcma_read32((cc)->core, offset)
+#define bcma_cc_write32(cc, offset, val) \
+	bcma_write32((cc)->core, offset, val)
+
+#define bcma_cc_mask32(cc, offset, mask) \
+	bcma_cc_write32(cc, offset, bcma_cc_read32(cc, offset) & (mask))
+#define bcma_cc_set32(cc, offset, set) \
+	bcma_cc_write32(cc, offset, bcma_cc_read32(cc, offset) | (set))
+#define bcma_cc_maskset32(cc, offset, mask, set) \
+	bcma_cc_write32(cc, offset, (bcma_cc_read32(cc, offset) & (mask)) | (set))
+
+extern void bcma_core_chipcommon_init(struct bcma_drv_cc *cc);
+
+extern void bcma_chipco_suspend(struct bcma_drv_cc *cc);
+extern void bcma_chipco_resume(struct bcma_drv_cc *cc);
+
+extern void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc,
+					  u32 ticks);
+
+void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value);
+
+u32 bcma_chipco_irq_status(struct bcma_drv_cc *cc, u32 mask);
+
+/* Chipcommon GPIO pin access. */
+u32 bcma_chipco_gpio_in(struct bcma_drv_cc *cc, u32 mask);
+u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value);
+u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value);
+u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value);
+u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value);
+u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value);
+
+/* PMU support */
+extern void bcma_pmu_init(struct bcma_drv_cc *cc);
+
+#endif /* LINUX_BCMA_DRIVER_CC_H_ */
diff --git a/include/linux/bcma/bcma_driver_pci.h b/include/linux/bcma/bcma_driver_pci.h
new file mode 100644
index 000000000000..b7e191cf00ec
--- /dev/null
+++ b/include/linux/bcma/bcma_driver_pci.h
@@ -0,0 +1,89 @@
+#ifndef LINUX_BCMA_DRIVER_PCI_H_
+#define LINUX_BCMA_DRIVER_PCI_H_
+
+#include <linux/types.h>
+
+struct pci_dev;
+
+/** PCI core registers. **/
+#define BCMA_CORE_PCI_CTL			0x0000	/* PCI Control */
+#define  BCMA_CORE_PCI_CTL_RST_OE		0x00000001 /* PCI_RESET Output Enable */
+#define  BCMA_CORE_PCI_CTL_RST			0x00000002 /* PCI_RESET driven out to pin */
+#define  BCMA_CORE_PCI_CTL_CLK_OE		0x00000004 /* Clock gate Output Enable */
+#define  BCMA_CORE_PCI_CTL_CLK			0x00000008 /* Gate for clock driven out to pin */
+#define BCMA_CORE_PCI_ARBCTL			0x0010	/* PCI Arbiter Control */
+#define  BCMA_CORE_PCI_ARBCTL_INTERN		0x00000001 /* Use internal arbiter */
+#define  BCMA_CORE_PCI_ARBCTL_EXTERN		0x00000002 /* Use external arbiter */
+#define  BCMA_CORE_PCI_ARBCTL_PARKID		0x00000006 /* Mask, selects which agent is parked on an idle bus */
+#define   BCMA_CORE_PCI_ARBCTL_PARKID_LAST	0x00000000 /* Last requestor */
+#define   BCMA_CORE_PCI_ARBCTL_PARKID_4710	0x00000002 /* 4710 */
+#define   BCMA_CORE_PCI_ARBCTL_PARKID_EXT0	0x00000004 /* External requestor 0 */
+#define   BCMA_CORE_PCI_ARBCTL_PARKID_EXT1	0x00000006 /* External requestor 1 */
+#define BCMA_CORE_PCI_ISTAT			0x0020	/* Interrupt status */
+#define  BCMA_CORE_PCI_ISTAT_INTA		0x00000001 /* PCI INTA# */
+#define  BCMA_CORE_PCI_ISTAT_INTB		0x00000002 /* PCI INTB# */
+#define  BCMA_CORE_PCI_ISTAT_SERR		0x00000004 /* PCI SERR# (write to clear) */
+#define  BCMA_CORE_PCI_ISTAT_PERR		0x00000008 /* PCI PERR# (write to clear) */
+#define  BCMA_CORE_PCI_ISTAT_PME		0x00000010 /* PCI PME# */
+#define BCMA_CORE_PCI_IMASK			0x0024	/* Interrupt mask */
+#define  BCMA_CORE_PCI_IMASK_INTA		0x00000001 /* PCI INTA# */
+#define  BCMA_CORE_PCI_IMASK_INTB		0x00000002 /* PCI INTB# */
+#define  BCMA_CORE_PCI_IMASK_SERR		0x00000004 /* PCI SERR# */
+#define  BCMA_CORE_PCI_IMASK_PERR		0x00000008 /* PCI PERR# */
+#define  BCMA_CORE_PCI_IMASK_PME		0x00000010 /* PCI PME# */
+#define BCMA_CORE_PCI_MBOX			0x0028	/* Backplane to PCI Mailbox */
+#define  BCMA_CORE_PCI_MBOX_F0_0		0x00000100 /* PCI function 0, INT 0 */
+#define  BCMA_CORE_PCI_MBOX_F0_1		0x00000200 /* PCI function 0, INT 1 */
+#define  BCMA_CORE_PCI_MBOX_F1_0		0x00000400 /* PCI function 1, INT 0 */
+#define  BCMA_CORE_PCI_MBOX_F1_1		0x00000800 /* PCI function 1, INT 1 */
+#define  BCMA_CORE_PCI_MBOX_F2_0		0x00001000 /* PCI function 2, INT 0 */
+#define  BCMA_CORE_PCI_MBOX_F2_1		0x00002000 /* PCI function 2, INT 1 */
+#define  BCMA_CORE_PCI_MBOX_F3_0		0x00004000 /* PCI function 3, INT 0 */
+#define  BCMA_CORE_PCI_MBOX_F3_1		0x00008000 /* PCI function 3, INT 1 */
+#define BCMA_CORE_PCI_BCAST_ADDR		0x0050	/* Backplane Broadcast Address */
+#define  BCMA_CORE_PCI_BCAST_ADDR_MASK		0x000000FF
+#define BCMA_CORE_PCI_BCAST_DATA		0x0054	/* Backplane Broadcast Data */
+#define BCMA_CORE_PCI_GPIO_IN			0x0060	/* rev >= 2 only */
+#define BCMA_CORE_PCI_GPIO_OUT			0x0064	/* rev >= 2 only */
+#define BCMA_CORE_PCI_GPIO_ENABLE		0x0068	/* rev >= 2 only */
+#define BCMA_CORE_PCI_GPIO_CTL			0x006C	/* rev >= 2 only */
+#define BCMA_CORE_PCI_SBTOPCI0			0x0100	/* Backplane to PCI translation 0 (sbtopci0) */
+#define  BCMA_CORE_PCI_SBTOPCI0_MASK		0xFC000000
+#define BCMA_CORE_PCI_SBTOPCI1			0x0104	/* Backplane to PCI translation 1 (sbtopci1) */
+#define  BCMA_CORE_PCI_SBTOPCI1_MASK		0xFC000000
+#define BCMA_CORE_PCI_SBTOPCI2			0x0108	/* Backplane to PCI translation 2 (sbtopci2) */
+#define  BCMA_CORE_PCI_SBTOPCI2_MASK		0xC0000000
+#define BCMA_CORE_PCI_PCICFG0			0x0400	/* PCI config space 0 (rev >= 8) */
+#define BCMA_CORE_PCI_PCICFG1			0x0500	/* PCI config space 1 (rev >= 8) */
+#define BCMA_CORE_PCI_PCICFG2			0x0600	/* PCI config space 2 (rev >= 8) */
+#define BCMA_CORE_PCI_PCICFG3			0x0700	/* PCI config space 3 (rev >= 8) */
+#define BCMA_CORE_PCI_SPROM(wordoffset)		(0x0800 + ((wordoffset) * 2)) /* SPROM shadow area (72 bytes) */
+
+/* SBtoPCIx */
+#define BCMA_CORE_PCI_SBTOPCI_MEM		0x00000000
+#define BCMA_CORE_PCI_SBTOPCI_IO		0x00000001
+#define BCMA_CORE_PCI_SBTOPCI_CFG0		0x00000002
+#define BCMA_CORE_PCI_SBTOPCI_CFG1		0x00000003
+#define BCMA_CORE_PCI_SBTOPCI_PREF		0x00000004 /* Prefetch enable */
+#define BCMA_CORE_PCI_SBTOPCI_BURST		0x00000008 /* Burst enable */
+#define BCMA_CORE_PCI_SBTOPCI_MRM		0x00000020 /* Memory Read Multiple */
+#define BCMA_CORE_PCI_SBTOPCI_RC		0x00000030 /* Read Command mask (rev >= 11) */
+#define  BCMA_CORE_PCI_SBTOPCI_RC_READ		0x00000000 /* Memory read */
+#define  BCMA_CORE_PCI_SBTOPCI_RC_READL		0x00000010 /* Memory read line */
+#define  BCMA_CORE_PCI_SBTOPCI_RC_READM		0x00000020 /* Memory read multiple */
+
+/* PCIcore specific boardflags */
+#define BCMA_CORE_PCI_BFL_NOPCI			0x00000400 /* Board leaves PCI floating */
+
+struct bcma_drv_pci {
+	struct bcma_device *core;
+	u8 setup_done:1;
+};
+
+/* Register access */
+#define pcicore_read32(pc, offset)		bcma_read32((pc)->core, offset)
+#define pcicore_write32(pc, offset, val)	bcma_write32((pc)->core, offset, val)
+
+extern void bcma_core_pci_init(struct bcma_drv_pci *pc);
+
+#endif /* LINUX_BCMA_DRIVER_PCI_H_ */
diff --git a/include/linux/bcma/bcma_regs.h b/include/linux/bcma/bcma_regs.h
new file mode 100644
index 000000000000..f82d88a960ce
--- /dev/null
+++ b/include/linux/bcma/bcma_regs.h
@@ -0,0 +1,34 @@
+#ifndef LINUX_BCMA_REGS_H_
+#define LINUX_BCMA_REGS_H_
+
+/* Agent registers (common for every core) */
+#define BCMA_IOCTL			0x0408
+#define  BCMA_IOCTL_CLK			0x0001
+#define  BCMA_IOCTL_FGC			0x0002
+#define  BCMA_IOCTL_CORE_BITS		0x3FFC
+#define  BCMA_IOCTL_PME_EN		0x4000
+#define  BCMA_IOCTL_BIST_EN		0x8000
+#define BCMA_RESET_CTL			0x0800
+#define  BCMA_RESET_CTL_RESET		0x0001
+
+/* BCMA PCI config space registers. */
+#define BCMA_PCI_PMCSR			0x44
+#define  BCMA_PCI_PE			0x100
+#define BCMA_PCI_BAR0_WIN		0x80	/* Backplane address space 0 */
+#define BCMA_PCI_BAR1_WIN		0x84	/* Backplane address space 1 */
+#define BCMA_PCI_SPROMCTL		0x88	/* SPROM control */
+#define  BCMA_PCI_SPROMCTL_WE		0x10	/* SPROM write enable */
+#define BCMA_PCI_BAR1_CONTROL		0x8c	/* Address space 1 burst control */
+#define BCMA_PCI_IRQS			0x90	/* PCI interrupts */
+#define BCMA_PCI_IRQMASK		0x94	/* PCI IRQ control and mask (pcirev >= 6 only) */
+#define BCMA_PCI_BACKPLANE_IRQS		0x98	/* Backplane Interrupts */
+#define BCMA_PCI_BAR0_WIN2		0xAC
+#define BCMA_PCI_GPIO_IN		0xB0	/* GPIO Input (pcirev >= 3 only) */
+#define BCMA_PCI_GPIO_OUT		0xB4	/* GPIO Output (pcirev >= 3 only) */
+#define BCMA_PCI_GPIO_OUT_ENABLE	0xB8	/* GPIO Output Enable/Disable (pcirev >= 3 only) */
+#define  BCMA_PCI_GPIO_SCS		0x10	/* PCI config space bit 4 for 4306c0 slow clock source */
+#define  BCMA_PCI_GPIO_HWRAD		0x20	/* PCI config space GPIO 13 for hw radio disable */
+#define  BCMA_PCI_GPIO_XTAL		0x40	/* PCI config space GPIO 14 for Xtal powerup */
+#define  BCMA_PCI_GPIO_PLL		0x80	/* PCI config space GPIO 15 for PLL powerdown */
+
+#endif /* LINUX_BCMA_REGS_H_ */