Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 471 insertions, 0 deletions

diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
new file mode 100644
index 000000000000..c85b210490ea
--- /dev/null
+++ b/include/linux/ethtool.h
@@ -0,0 +1,471 @@
+/*
+ * ethtool.h: Defines for Linux ethtool.
+ *
+ * Copyright (C) 1998 David S. Miller (davem@redhat.com)
+ * Copyright 2001 Jeff Garzik <jgarzik@pobox.com>
+ * Portions Copyright 2001 Sun Microsystems (thockin@sun.com)
+ * Portions Copyright 2002 Intel (eli.kupermann@intel.com,
+ *                                christopher.leech@intel.com,
+ *                                scott.feldman@intel.com)
+ */
+
+#ifndef _LINUX_ETHTOOL_H
+#define _LINUX_ETHTOOL_H
+
+
+/* This should work for both 32 and 64 bit userland. */
+struct ethtool_cmd {
+	u32	cmd;
+	u32	supported;	/* Features this interface supports */
+	u32	advertising;	/* Features this interface advertises */
+	u16	speed;		/* The forced speed, 10Mb, 100Mb, gigabit */
+	u8	duplex;		/* Duplex, half or full */
+	u8	port;		/* Which connector port */
+	u8	phy_address;
+	u8	transceiver;	/* Which transceiver to use */
+	u8	autoneg;	/* Enable or disable autonegotiation */
+	u32	maxtxpkt;	/* Tx pkts before generating tx int */
+	u32	maxrxpkt;	/* Rx pkts before generating rx int */
+	u32	reserved[4];
+};
+
+#define ETHTOOL_BUSINFO_LEN	32
+/* these strings are set to whatever the driver author decides... */
+struct ethtool_drvinfo {
+	u32	cmd;
+	char	driver[32];	/* driver short name, "tulip", "eepro100" */
+	char	version[32];	/* driver version string */
+	char	fw_version[32];	/* firmware version string, if applicable */
+	char	bus_info[ETHTOOL_BUSINFO_LEN];	/* Bus info for this IF. */
+				/* For PCI devices, use pci_name(pci_dev). */
+	char	reserved1[32];
+	char	reserved2[16];
+	u32	n_stats;	/* number of u64's from ETHTOOL_GSTATS */
+	u32	testinfo_len;
+	u32	eedump_len;	/* Size of data from ETHTOOL_GEEPROM (bytes) */
+	u32	regdump_len;	/* Size of data from ETHTOOL_GREGS (bytes) */
+};
+
+#define SOPASS_MAX	6
+/* wake-on-lan settings */
+struct ethtool_wolinfo {
+	u32	cmd;
+	u32	supported;
+	u32	wolopts;
+	u8	sopass[SOPASS_MAX]; /* SecureOn(tm) password */
+};
+
+/* for passing single values */
+struct ethtool_value {
+	u32	cmd;
+	u32	data;
+};
+
+/* for passing big chunks of data */
+struct ethtool_regs {
+	u32	cmd;
+	u32	version; /* driver-specific, indicates different chips/revs */
+	u32	len; /* bytes */
+	u8	data[0];
+};
+
+/* for passing EEPROM chunks */
+struct ethtool_eeprom {
+	u32	cmd;
+	u32	magic;
+	u32	offset; /* in bytes */
+	u32	len; /* in bytes */
+	u8	data[0];
+};
+
+/* for configuring coalescing parameters of chip */
+struct ethtool_coalesce {
+	u32	cmd;	/* ETHTOOL_{G,S}COALESCE */
+
+	/* How many usecs to delay an RX interrupt after
+	 * a packet arrives.  If 0, only rx_max_coalesced_frames
+	 * is used.
+	 */
+	u32	rx_coalesce_usecs;
+
+	/* How many packets to delay an RX interrupt after
+	 * a packet arrives.  If 0, only rx_coalesce_usecs is
+	 * used.  It is illegal to set both usecs and max frames
+	 * to zero as this would cause RX interrupts to never be
+	 * generated.
+	 */
+	u32	rx_max_coalesced_frames;
+
+	/* Same as above two parameters, except that these values
+	 * apply while an IRQ is being serviced by the host.  Not
+	 * all cards support this feature and the values are ignored
+	 * in that case.
+	 */
+	u32	rx_coalesce_usecs_irq;
+	u32	rx_max_coalesced_frames_irq;
+
+	/* How many usecs to delay a TX interrupt after
+	 * a packet is sent.  If 0, only tx_max_coalesced_frames
+	 * is used.
+	 */
+	u32	tx_coalesce_usecs;
+
+	/* How many packets to delay a TX interrupt after
+	 * a packet is sent.  If 0, only tx_coalesce_usecs is
+	 * used.  It is illegal to set both usecs and max frames
+	 * to zero as this would cause TX interrupts to never be
+	 * generated.
+	 */
+	u32	tx_max_coalesced_frames;
+
+	/* Same as above two parameters, except that these values
+	 * apply while an IRQ is being serviced by the host.  Not
+	 * all cards support this feature and the values are ignored
+	 * in that case.
+	 */
+	u32	tx_coalesce_usecs_irq;
+	u32	tx_max_coalesced_frames_irq;
+
+	/* How many usecs to delay in-memory statistics
+	 * block updates.  Some drivers do not have an in-memory
+	 * statistic block, and in such cases this value is ignored.
+	 * This value must not be zero.
+	 */
+	u32	stats_block_coalesce_usecs;
+
+	/* Adaptive RX/TX coalescing is an algorithm implemented by
+	 * some drivers to improve latency under low packet rates and
+	 * improve throughput under high packet rates.  Some drivers
+	 * only implement one of RX or TX adaptive coalescing.  Anything
+	 * not implemented by the driver causes these values to be
+	 * silently ignored.
+	 */
+	u32	use_adaptive_rx_coalesce;
+	u32	use_adaptive_tx_coalesce;
+
+	/* When the packet rate (measured in packets per second)
+	 * is below pkt_rate_low, the {rx,tx}_*_low parameters are
+	 * used.
+	 */
+	u32	pkt_rate_low;
+	u32	rx_coalesce_usecs_low;
+	u32	rx_max_coalesced_frames_low;
+	u32	tx_coalesce_usecs_low;
+	u32	tx_max_coalesced_frames_low;
+
+	/* When the packet rate is below pkt_rate_high but above
+	 * pkt_rate_low (both measured in packets per second) the
+	 * normal {rx,tx}_* coalescing parameters are used.
+	 */
+
+	/* When the packet rate is (measured in packets per second)
+	 * is above pkt_rate_high, the {rx,tx}_*_high parameters are
+	 * used.
+	 */
+	u32	pkt_rate_high;
+	u32	rx_coalesce_usecs_high;
+	u32	rx_max_coalesced_frames_high;
+	u32	tx_coalesce_usecs_high;
+	u32	tx_max_coalesced_frames_high;
+
+	/* How often to do adaptive coalescing packet rate sampling,
+	 * measured in seconds.  Must not be zero.
+	 */
+	u32	rate_sample_interval;
+};
+
+/* for configuring RX/TX ring parameters */
+struct ethtool_ringparam {
+	u32	cmd;	/* ETHTOOL_{G,S}RINGPARAM */
+
+	/* Read only attributes.  These indicate the maximum number
+	 * of pending RX/TX ring entries the driver will allow the
+	 * user to set.
+	 */
+	u32	rx_max_pending;
+	u32	rx_mini_max_pending;
+	u32	rx_jumbo_max_pending;
+	u32	tx_max_pending;
+
+	/* Values changeable by the user.  The valid values are
+	 * in the range 1 to the "*_max_pending" counterpart above.
+	 */
+	u32	rx_pending;
+	u32	rx_mini_pending;
+	u32	rx_jumbo_pending;
+	u32	tx_pending;
+};
+
+/* for configuring link flow control parameters */
+struct ethtool_pauseparam {
+	u32	cmd;	/* ETHTOOL_{G,S}PAUSEPARAM */
+
+	/* If the link is being auto-negotiated (via ethtool_cmd.autoneg
+	 * being true) the user may set 'autonet' here non-zero to have the
+	 * pause parameters be auto-negotiated too.  In such a case, the
+	 * {rx,tx}_pause values below determine what capabilities are
+	 * advertised.
+	 *
+	 * If 'autoneg' is zero or the link is not being auto-negotiated,
+	 * then {rx,tx}_pause force the driver to use/not-use pause
+	 * flow control.
+	 */
+	u32	autoneg;
+	u32	rx_pause;
+	u32	tx_pause;
+};
+
+#define ETH_GSTRING_LEN		32
+enum ethtool_stringset {
+	ETH_SS_TEST		= 0,
+	ETH_SS_STATS,
+};
+
+/* for passing string sets for data tagging */
+struct ethtool_gstrings {
+	u32	cmd;		/* ETHTOOL_GSTRINGS */
+	u32	string_set;	/* string set id e.c. ETH_SS_TEST, etc*/
+	u32	len;		/* number of strings in the string set */
+	u8	data[0];
+};
+
+enum ethtool_test_flags {
+	ETH_TEST_FL_OFFLINE	= (1 << 0),	/* online / offline */
+	ETH_TEST_FL_FAILED	= (1 << 1),	/* test passed / failed */
+};
+
+/* for requesting NIC test and getting results*/
+struct ethtool_test {
+	u32	cmd;		/* ETHTOOL_TEST */
+	u32	flags;		/* ETH_TEST_FL_xxx */
+	u32	reserved;
+	u32	len;		/* result length, in number of u64 elements */
+	u64	data[0];
+};
+
+/* for dumping NIC-specific statistics */
+struct ethtool_stats {
+	u32	cmd;		/* ETHTOOL_GSTATS */
+	u32	n_stats;	/* number of u64's being returned */
+	u64	data[0];
+};
+
+struct net_device;
+
+/* Some generic methods drivers may use in their ethtool_ops */
+u32 ethtool_op_get_link(struct net_device *dev);
+u32 ethtool_op_get_tx_csum(struct net_device *dev);
+int ethtool_op_set_tx_csum(struct net_device *dev, u32 data);
+u32 ethtool_op_get_sg(struct net_device *dev);
+int ethtool_op_set_sg(struct net_device *dev, u32 data);
+u32 ethtool_op_get_tso(struct net_device *dev);
+int ethtool_op_set_tso(struct net_device *dev, u32 data);
+
+/**
+ * &ethtool_ops - Alter and report network device settings
+ * get_settings: Get device-specific settings
+ * set_settings: Set device-specific settings
+ * get_drvinfo: Report driver information
+ * get_regs: Get device registers
+ * get_wol: Report whether Wake-on-Lan is enabled
+ * set_wol: Turn Wake-on-Lan on or off
+ * get_msglevel: Report driver message level
+ * set_msglevel: Set driver message level
+ * nway_reset: Restart autonegotiation
+ * get_link: Get link status
+ * get_eeprom: Read data from the device EEPROM
+ * set_eeprom: Write data to the device EEPROM
+ * get_coalesce: Get interrupt coalescing parameters
+ * set_coalesce: Set interrupt coalescing parameters
+ * get_ringparam: Report ring sizes
+ * set_ringparam: Set ring sizes
+ * get_pauseparam: Report pause parameters
+ * set_pauseparam: Set pause paramters
+ * get_rx_csum: Report whether receive checksums are turned on or off
+ * set_rx_csum: Turn receive checksum on or off
+ * get_tx_csum: Report whether transmit checksums are turned on or off
+ * set_tx_csum: Turn transmit checksums on or off
+ * get_sg: Report whether scatter-gather is enabled
+ * set_sg: Turn scatter-gather on or off
+ * get_tso: Report whether TCP segmentation offload is enabled
+ * set_tso: Turn TCP segmentation offload on or off
+ * self_test: Run specified self-tests
+ * get_strings: Return a set of strings that describe the requested objects 
+ * phys_id: Identify the device
+ * get_stats: Return statistics about the device
+ *
+ * Description:
+ *
+ * get_settings:
+ *	@get_settings is passed an &ethtool_cmd to fill in.  It returns
+ *	an negative errno or zero.
+ *
+ * set_settings:
+ *	@set_settings is passed an &ethtool_cmd and should attempt to set
+ *	all the settings this device supports.  It may return an error value
+ *	if something goes wrong (otherwise 0).
+ *
+ * get_eeprom:
+ *	Should fill in the magic field.  Don't need to check len for zero
+ *	or wraparound.  Fill in the data argument with the eeprom values
+ *	from offset to offset + len.  Update len to the amount read.
+ *	Returns an error or zero.
+ *
+ * set_eeprom:
+ *	Should validate the magic field.  Don't need to check len for zero
+ *	or wraparound.  Update len to the amount written.  Returns an error
+ *	or zero.
+ */
+struct ethtool_ops {
+	int	(*get_settings)(struct net_device *, struct ethtool_cmd *);
+	int	(*set_settings)(struct net_device *, struct ethtool_cmd *);
+	void	(*get_drvinfo)(struct net_device *, struct ethtool_drvinfo *);
+	int	(*get_regs_len)(struct net_device *);
+	void	(*get_regs)(struct net_device *, struct ethtool_regs *, void *);
+	void	(*get_wol)(struct net_device *, struct ethtool_wolinfo *);
+	int	(*set_wol)(struct net_device *, struct ethtool_wolinfo *);
+	u32	(*get_msglevel)(struct net_device *);
+	void	(*set_msglevel)(struct net_device *, u32);
+	int	(*nway_reset)(struct net_device *);
+	u32	(*get_link)(struct net_device *);
+	int	(*get_eeprom_len)(struct net_device *);
+	int	(*get_eeprom)(struct net_device *, struct ethtool_eeprom *, u8 *);
+	int	(*set_eeprom)(struct net_device *, struct ethtool_eeprom *, u8 *);
+	int	(*get_coalesce)(struct net_device *, struct ethtool_coalesce *);
+	int	(*set_coalesce)(struct net_device *, struct ethtool_coalesce *);
+	void	(*get_ringparam)(struct net_device *, struct ethtool_ringparam *);
+	int	(*set_ringparam)(struct net_device *, struct ethtool_ringparam *);
+	void	(*get_pauseparam)(struct net_device *, struct ethtool_pauseparam*);
+	int	(*set_pauseparam)(struct net_device *, struct ethtool_pauseparam*);
+	u32	(*get_rx_csum)(struct net_device *);
+	int	(*set_rx_csum)(struct net_device *, u32);
+	u32	(*get_tx_csum)(struct net_device *);
+	int	(*set_tx_csum)(struct net_device *, u32);
+	u32	(*get_sg)(struct net_device *);
+	int	(*set_sg)(struct net_device *, u32);
+	u32	(*get_tso)(struct net_device *);
+	int	(*set_tso)(struct net_device *, u32);
+	int	(*self_test_count)(struct net_device *);
+	void	(*self_test)(struct net_device *, struct ethtool_test *, u64 *);
+	void	(*get_strings)(struct net_device *, u32 stringset, u8 *);
+	int	(*phys_id)(struct net_device *, u32);
+	int	(*get_stats_count)(struct net_device *);
+	void	(*get_ethtool_stats)(struct net_device *, struct ethtool_stats *, u64 *);
+	int	(*begin)(struct net_device *);
+	void	(*complete)(struct net_device *);
+};
+
+/* CMDs currently supported */
+#define ETHTOOL_GSET		0x00000001 /* Get settings. */
+#define ETHTOOL_SSET		0x00000002 /* Set settings. */
+#define ETHTOOL_GDRVINFO	0x00000003 /* Get driver info. */
+#define ETHTOOL_GREGS		0x00000004 /* Get NIC registers. */
+#define ETHTOOL_GWOL		0x00000005 /* Get wake-on-lan options. */
+#define ETHTOOL_SWOL		0x00000006 /* Set wake-on-lan options. */
+#define ETHTOOL_GMSGLVL		0x00000007 /* Get driver message level */
+#define ETHTOOL_SMSGLVL		0x00000008 /* Set driver msg level. */
+#define ETHTOOL_NWAY_RST	0x00000009 /* Restart autonegotiation. */
+#define ETHTOOL_GLINK		0x0000000a /* Get link status (ethtool_value) */
+#define ETHTOOL_GEEPROM		0x0000000b /* Get EEPROM data */
+#define ETHTOOL_SEEPROM		0x0000000c /* Set EEPROM data. */
+#define ETHTOOL_GCOALESCE	0x0000000e /* Get coalesce config */
+#define ETHTOOL_SCOALESCE	0x0000000f /* Set coalesce config. */
+#define ETHTOOL_GRINGPARAM	0x00000010 /* Get ring parameters */
+#define ETHTOOL_SRINGPARAM	0x00000011 /* Set ring parameters. */
+#define ETHTOOL_GPAUSEPARAM	0x00000012 /* Get pause parameters */
+#define ETHTOOL_SPAUSEPARAM	0x00000013 /* Set pause parameters. */
+#define ETHTOOL_GRXCSUM		0x00000014 /* Get RX hw csum enable (ethtool_value) */
+#define ETHTOOL_SRXCSUM		0x00000015 /* Set RX hw csum enable (ethtool_value) */
+#define ETHTOOL_GTXCSUM		0x00000016 /* Get TX hw csum enable (ethtool_value) */
+#define ETHTOOL_STXCSUM		0x00000017 /* Set TX hw csum enable (ethtool_value) */
+#define ETHTOOL_GSG		0x00000018 /* Get scatter-gather enable
+					    * (ethtool_value) */
+#define ETHTOOL_SSG		0x00000019 /* Set scatter-gather enable
+					    * (ethtool_value). */
+#define ETHTOOL_TEST		0x0000001a /* execute NIC self-test. */
+#define ETHTOOL_GSTRINGS	0x0000001b /* get specified string set */
+#define ETHTOOL_PHYS_ID		0x0000001c /* identify the NIC */
+#define ETHTOOL_GSTATS		0x0000001d /* get NIC-specific statistics */
+#define ETHTOOL_GTSO		0x0000001e /* Get TSO enable (ethtool_value) */
+#define ETHTOOL_STSO		0x0000001f /* Set TSO enable (ethtool_value) */
+
+/* compatibility with older code */
+#define SPARC_ETH_GSET		ETHTOOL_GSET
+#define SPARC_ETH_SSET		ETHTOOL_SSET
+
+/* Indicates what features are supported by the interface. */
+#define SUPPORTED_10baseT_Half		(1 << 0)
+#define SUPPORTED_10baseT_Full		(1 << 1)
+#define SUPPORTED_100baseT_Half		(1 << 2)
+#define SUPPORTED_100baseT_Full		(1 << 3)
+#define SUPPORTED_1000baseT_Half	(1 << 4)
+#define SUPPORTED_1000baseT_Full	(1 << 5)
+#define SUPPORTED_Autoneg		(1 << 6)
+#define SUPPORTED_TP			(1 << 7)
+#define SUPPORTED_AUI			(1 << 8)
+#define SUPPORTED_MII			(1 << 9)
+#define SUPPORTED_FIBRE			(1 << 10)
+#define SUPPORTED_BNC			(1 << 11)
+#define SUPPORTED_10000baseT_Full	(1 << 12)
+
+/* Indicates what features are advertised by the interface. */
+#define ADVERTISED_10baseT_Half		(1 << 0)
+#define ADVERTISED_10baseT_Full		(1 << 1)
+#define ADVERTISED_100baseT_Half	(1 << 2)
+#define ADVERTISED_100baseT_Full	(1 << 3)
+#define ADVERTISED_1000baseT_Half	(1 << 4)
+#define ADVERTISED_1000baseT_Full	(1 << 5)
+#define ADVERTISED_Autoneg		(1 << 6)
+#define ADVERTISED_TP			(1 << 7)
+#define ADVERTISED_AUI			(1 << 8)
+#define ADVERTISED_MII			(1 << 9)
+#define ADVERTISED_FIBRE		(1 << 10)
+#define ADVERTISED_BNC			(1 << 11)
+#define ADVERTISED_10000baseT_Full	(1 << 12)
+
+/* The following are all involved in forcing a particular link
+ * mode for the device for setting things.  When getting the
+ * devices settings, these indicate the current mode and whether
+ * it was foced up into this mode or autonegotiated.
+ */
+
+/* The forced speed, 10Mb, 100Mb, gigabit, 10GbE. */
+#define SPEED_10		10
+#define SPEED_100		100
+#define SPEED_1000		1000
+#define SPEED_10000		10000
+
+/* Duplex, half or full. */
+#define DUPLEX_HALF		0x00
+#define DUPLEX_FULL		0x01
+
+/* Which connector port. */
+#define PORT_TP			0x00
+#define PORT_AUI		0x01
+#define PORT_MII		0x02
+#define PORT_FIBRE		0x03
+#define PORT_BNC		0x04
+
+/* Which transceiver to use. */
+#define XCVR_INTERNAL		0x00
+#define XCVR_EXTERNAL		0x01
+#define XCVR_DUMMY1		0x02
+#define XCVR_DUMMY2		0x03
+#define XCVR_DUMMY3		0x04
+
+/* Enable or disable autonegotiation.  If this is set to enable,
+ * the forced link modes above are completely ignored.
+ */
+#define AUTONEG_DISABLE		0x00
+#define AUTONEG_ENABLE		0x01
+
+/* Wake-On-Lan options. */
+#define WAKE_PHY		(1 << 0)
+#define WAKE_UCAST		(1 << 1)
+#define WAKE_MCAST		(1 << 2)
+#define WAKE_BCAST		(1 << 3)
+#define WAKE_ARP		(1 << 4)
+#define WAKE_MAGIC		(1 << 5)
+#define WAKE_MAGICSECURE	(1 << 6) /* only meaningful if WAKE_MAGIC */
+
+#endif /* _LINUX_ETHTOOL_H */