summaryrefslogtreecommitdiff
path: root/include/linux/mfd/lp8788.h
diff options
context:
space:
mode:
authorMilo Kim <Milo.Kim@ti.com>2012-09-19 18:53:33 +0200
committerSamuel Ortiz <sameo@linux.intel.com>2012-09-23 20:51:34 +0200
commiteea6b7cc53aaecf868e1643058159807c744e04e (patch)
tree1922328c8edb85f2c106075c966baa07f15ea831 /include/linux/mfd/lp8788.h
parent804971ec3793d30f40c1a74775dd3fe89deb461a (diff)
mfd: Add lp8788 mfd driver
TI LP8788 PMU provides regulators, battery charger, ADC, RTC, backlight driver and current sinks. This MFD patch supports the I2C communication using the regmap, the interrupt handling using the linear IRQ domain and configurable platform data structures for each driver module. (Driver Architecture) < mfd devices > LP8788 HW .......... mfd .......... regulator drivers I2C power supply driver IRQs iio adc driver rtc driver backlight driver current sink drivers o regulators : LDOs and BUCKs o power supply : Battery charger o iio adc : Battery voltage/temperature o rtc : RTC and alarm o backlight o current sink : LED and vibrator All MFD device modules are registered by LP8788 MFD core driver. For sharing information such like the virtual IRQ number, MFD core driver uses the resource structure. Then each module can retrieve the specific IRQ number and detect it in the IRQ thread. Configurable platform data is handled in each driver module. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Diffstat (limited to 'include/linux/mfd/lp8788.h')
-rw-r--r--include/linux/mfd/lp8788.h364
1 files changed, 364 insertions, 0 deletions
diff --git a/include/linux/mfd/lp8788.h b/include/linux/mfd/lp8788.h
new file mode 100644
index 000000000000..cec364bdccfa
--- /dev/null
+++ b/include/linux/mfd/lp8788.h
@@ -0,0 +1,364 @@
+/*
+ * TI LP8788 MFD Device
+ *
+ * Copyright 2012 Texas Instruments
+ *
+ * Author: Milo(Woogyom) Kim <milo.kim@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __MFD_LP8788_H__
+#define __MFD_LP8788_H__
+
+#include <linux/gpio.h>
+#include <linux/irqdomain.h>
+#include <linux/regmap.h>
+
+#define LP8788_DEV_BUCK "lp8788-buck"
+#define LP8788_DEV_DLDO "lp8788-dldo"
+#define LP8788_DEV_ALDO "lp8788-aldo"
+#define LP8788_DEV_CHARGER "lp8788-charger"
+#define LP8788_DEV_RTC "lp8788-rtc"
+#define LP8788_DEV_BACKLIGHT "lp8788-backlight"
+#define LP8788_DEV_VIBRATOR "lp8788-vibrator"
+#define LP8788_DEV_KEYLED "lp8788-keyled"
+#define LP8788_DEV_ADC "lp8788-adc"
+
+#define LP8788_NUM_BUCKS 4
+#define LP8788_NUM_DLDOS 12
+#define LP8788_NUM_ALDOS 10
+#define LP8788_NUM_BUCK2_DVS 2
+
+#define LP8788_CHG_IRQ "CHG_IRQ"
+#define LP8788_PRSW_IRQ "PRSW_IRQ"
+#define LP8788_BATT_IRQ "BATT_IRQ"
+#define LP8788_ALM_IRQ "ALARM_IRQ"
+
+enum lp8788_int_id {
+ /* interrup register 1 : Addr 00h */
+ LP8788_INT_TSDL,
+ LP8788_INT_TSDH,
+ LP8788_INT_UVLO,
+ LP8788_INT_FLAGMON,
+ LP8788_INT_PWRON_TIME,
+ LP8788_INT_PWRON,
+ LP8788_INT_COMP1,
+ LP8788_INT_COMP2,
+
+ /* interrupt register 2 : Addr 01h */
+ LP8788_INT_CHG_INPUT_STATE,
+ LP8788_INT_CHG_STATE,
+ LP8788_INT_EOC,
+ LP8788_INT_CHG_RESTART,
+ LP8788_INT_RESTART_TIMEOUT,
+ LP8788_INT_FULLCHG_TIMEOUT,
+ LP8788_INT_PRECHG_TIMEOUT,
+
+ /* interrupt register 3 : Addr 02h */
+ LP8788_INT_RTC_ALARM1 = 17,
+ LP8788_INT_RTC_ALARM2,
+ LP8788_INT_ENTER_SYS_SUPPORT,
+ LP8788_INT_EXIT_SYS_SUPPORT,
+ LP8788_INT_BATT_LOW,
+ LP8788_INT_NO_BATT,
+
+ LP8788_INT_MAX = 24,
+};
+
+enum lp8788_dvs_sel {
+ DVS_SEL_V0,
+ DVS_SEL_V1,
+ DVS_SEL_V2,
+ DVS_SEL_V3,
+};
+
+enum lp8788_ext_ldo_en_id {
+ EN_ALDO1,
+ EN_ALDO234,
+ EN_ALDO5,
+ EN_ALDO7,
+ EN_DLDO7,
+ EN_DLDO911,
+ EN_LDOS_MAX,
+};
+
+enum lp8788_charger_event {
+ NO_CHARGER,
+ CHARGER_DETECTED,
+};
+
+enum lp8788_bl_ctrl_mode {
+ LP8788_BL_REGISTER_ONLY,
+ LP8788_BL_COMB_PWM_BASED, /* PWM + I2C, changed by PWM input */
+ LP8788_BL_COMB_REGISTER_BASED, /* PWM + I2C, changed by I2C */
+};
+
+enum lp8788_bl_dim_mode {
+ LP8788_DIM_EXPONENTIAL,
+ LP8788_DIM_LINEAR,
+};
+
+enum lp8788_bl_full_scale_current {
+ LP8788_FULLSCALE_5000uA,
+ LP8788_FULLSCALE_8500uA,
+ LP8788_FULLSCALE_1200uA,
+ LP8788_FULLSCALE_1550uA,
+ LP8788_FULLSCALE_1900uA,
+ LP8788_FULLSCALE_2250uA,
+ LP8788_FULLSCALE_2600uA,
+ LP8788_FULLSCALE_2950uA,
+};
+
+enum lp8788_bl_ramp_step {
+ LP8788_RAMP_8us,
+ LP8788_RAMP_1024us,
+ LP8788_RAMP_2048us,
+ LP8788_RAMP_4096us,
+ LP8788_RAMP_8192us,
+ LP8788_RAMP_16384us,
+ LP8788_RAMP_32768us,
+ LP8788_RAMP_65538us,
+};
+
+enum lp8788_bl_pwm_polarity {
+ LP8788_PWM_ACTIVE_HIGH,
+ LP8788_PWM_ACTIVE_LOW,
+};
+
+enum lp8788_isink_scale {
+ LP8788_ISINK_SCALE_100mA,
+ LP8788_ISINK_SCALE_120mA,
+};
+
+enum lp8788_isink_number {
+ LP8788_ISINK_1,
+ LP8788_ISINK_2,
+ LP8788_ISINK_3,
+};
+
+enum lp8788_alarm_sel {
+ LP8788_ALARM_1,
+ LP8788_ALARM_2,
+ LP8788_ALARM_MAX,
+};
+
+enum lp8788_adc_id {
+ LPADC_VBATT_5P5,
+ LPADC_VIN_CHG,
+ LPADC_IBATT,
+ LPADC_IC_TEMP,
+ LPADC_VBATT_6P0,
+ LPADC_VBATT_5P0,
+ LPADC_ADC1,
+ LPADC_ADC2,
+ LPADC_VDD,
+ LPADC_VCOIN,
+ LPADC_VDD_LDO,
+ LPADC_ADC3,
+ LPADC_ADC4,
+ LPADC_MAX,
+};
+
+struct lp8788;
+
+/*
+ * lp8788_buck1_dvs
+ * @gpio : gpio pin number for dvs control
+ * @vsel : dvs selector for buck v1 register
+ */
+struct lp8788_buck1_dvs {
+ int gpio;
+ enum lp8788_dvs_sel vsel;
+};
+
+/*
+ * lp8788_buck2_dvs
+ * @gpio : two gpio pin numbers are used for dvs
+ * @vsel : dvs selector for buck v2 register
+ */
+struct lp8788_buck2_dvs {
+ int gpio[LP8788_NUM_BUCK2_DVS];
+ enum lp8788_dvs_sel vsel;
+};
+
+/*
+ * struct lp8788_ldo_enable_pin
+ *
+ * Basically, all LDOs are enabled through the I2C commands.
+ * But ALDO 1 ~ 5, 7, DLDO 7, 9, 11 can be enabled by external gpio pins.
+ *
+ * @gpio : gpio number which is used for enabling ldos
+ * @init_state : initial gpio state (ex. GPIOF_OUT_INIT_LOW)
+ */
+struct lp8788_ldo_enable_pin {
+ int gpio;
+ int init_state;
+};
+
+/*
+ * struct lp8788_chg_param
+ * @addr : charging control register address (range : 0x11 ~ 0x1C)
+ * @val : charging parameter value
+ */
+struct lp8788_chg_param {
+ u8 addr;
+ u8 val;
+};
+
+/*
+ * struct lp8788_charger_platform_data
+ * @vbatt_adc : adc selection id for battery voltage
+ * @batt_temp_adc : adc selection id for battery temperature
+ * @max_vbatt_mv : used for calculating battery capacity
+ * @chg_params : initial charging parameters
+ * @num_chg_params : numbers of charging parameters
+ * @charger_event : the charger event can be reported to the platform side
+ */
+struct lp8788_charger_platform_data {
+ enum lp8788_adc_id vbatt_adc;
+ enum lp8788_adc_id batt_temp_adc;
+ unsigned int max_vbatt_mv;
+ struct lp8788_chg_param *chg_params;
+ int num_chg_params;
+ void (*charger_event) (struct lp8788 *lp,
+ enum lp8788_charger_event event);
+};
+
+/*
+ * struct lp8788_bl_pwm_data
+ * @pwm_set_intensity : set duty of pwm
+ * @pwm_get_intensity : get current duty of pwm
+ */
+struct lp8788_bl_pwm_data {
+ void (*pwm_set_intensity) (int brightness, int max_brightness);
+ int (*pwm_get_intensity) (int max_brightness);
+};
+
+/*
+ * struct lp8788_backlight_platform_data
+ * @name : backlight driver name. (default: "lcd-backlight")
+ * @initial_brightness : initial value of backlight brightness
+ * @bl_mode : brightness control by pwm or lp8788 register
+ * @dim_mode : dimming mode selection
+ * @full_scale : full scale current setting
+ * @rise_time : brightness ramp up step time
+ * @fall_time : brightness ramp down step time
+ * @pwm_pol : pwm polarity setting when bl_mode is pwm based
+ * @pwm_data : platform specific pwm generation functions
+ * only valid when bl_mode is pwm based
+ */
+struct lp8788_backlight_platform_data {
+ char *name;
+ int initial_brightness;
+ enum lp8788_bl_ctrl_mode bl_mode;
+ enum lp8788_bl_dim_mode dim_mode;
+ enum lp8788_bl_full_scale_current full_scale;
+ enum lp8788_bl_ramp_step rise_time;
+ enum lp8788_bl_ramp_step fall_time;
+ enum lp8788_bl_pwm_polarity pwm_pol;
+ struct lp8788_bl_pwm_data pwm_data;
+};
+
+/*
+ * struct lp8788_led_platform_data
+ * @name : led driver name. (default: "keyboard-backlight")
+ * @scale : current scale
+ * @num : current sink number
+ * @iout_code : current output value (Addr 9Ah ~ 9Bh)
+ */
+struct lp8788_led_platform_data {
+ char *name;
+ enum lp8788_isink_scale scale;
+ enum lp8788_isink_number num;
+ int iout_code;
+};
+
+/*
+ * struct lp8788_vib_platform_data
+ * @name : vibrator driver name
+ * @scale : current scale
+ * @num : current sink number
+ * @iout_code : current output value (Addr 9Ah ~ 9Bh)
+ * @pwm_code : PWM code value (Addr 9Ch ~ 9Eh)
+ */
+struct lp8788_vib_platform_data {
+ char *name;
+ enum lp8788_isink_scale scale;
+ enum lp8788_isink_number num;
+ int iout_code;
+ int pwm_code;
+};
+
+/*
+ * struct lp8788_platform_data
+ * @init_func : used for initializing registers
+ * before mfd driver is registered
+ * @buck_data : regulator initial data for buck
+ * @dldo_data : regulator initial data for digital ldo
+ * @aldo_data : regulator initial data for analog ldo
+ * @buck1_dvs : gpio configurations for buck1 dvs
+ * @buck2_dvs : gpio configurations for buck2 dvs
+ * @ldo_pin : gpio configurations for enabling LDOs
+ * @chg_pdata : platform data for charger driver
+ * @alarm_sel : rtc alarm selection (1 or 2)
+ * @bl_pdata : configurable data for backlight driver
+ * @led_pdata : configurable data for led driver
+ * @vib_pdata : configurable data for vibrator driver
+ * @adc_pdata : iio map data for adc driver
+ */
+struct lp8788_platform_data {
+ /* general system information */
+ int (*init_func) (struct lp8788 *lp);
+
+ /* regulators */
+ struct regulator_init_data *buck_data[LP8788_NUM_BUCKS];
+ struct regulator_init_data *dldo_data[LP8788_NUM_DLDOS];
+ struct regulator_init_data *aldo_data[LP8788_NUM_ALDOS];
+ struct lp8788_buck1_dvs *buck1_dvs;
+ struct lp8788_buck2_dvs *buck2_dvs;
+ struct lp8788_ldo_enable_pin *ldo_pin[EN_LDOS_MAX];
+
+ /* charger */
+ struct lp8788_charger_platform_data *chg_pdata;
+
+ /* rtc alarm */
+ enum lp8788_alarm_sel alarm_sel;
+
+ /* backlight */
+ struct lp8788_backlight_platform_data *bl_pdata;
+
+ /* current sinks */
+ struct lp8788_led_platform_data *led_pdata;
+ struct lp8788_vib_platform_data *vib_pdata;
+
+ /* adc iio map data */
+ struct iio_map *adc_pdata;
+};
+
+/*
+ * struct lp8788
+ * @dev : parent device pointer
+ * @regmap : used for i2c communcation on accessing registers
+ * @irqdm : interrupt domain for handling nested interrupt
+ * @irq : pin number of IRQ_N
+ * @pdata : lp8788 platform specific data
+ */
+struct lp8788 {
+ struct device *dev;
+ struct regmap *regmap;
+ struct irq_domain *irqdm;
+ int irq;
+ struct lp8788_platform_data *pdata;
+};
+
+int lp8788_irq_init(struct lp8788 *lp, int chip_irq);
+void lp8788_irq_exit(struct lp8788 *lp);
+int lp8788_read_byte(struct lp8788 *lp, u8 reg, u8 *data);
+int lp8788_read_multi_bytes(struct lp8788 *lp, u8 reg, u8 *data, size_t count);
+int lp8788_write_byte(struct lp8788 *lp, u8 reg, u8 data);
+int lp8788_update_bits(struct lp8788 *lp, u8 reg, u8 mask, u8 data);
+#endif