Merge tag 'mfd-for-linus-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "New Device Support:
   - Add support for 88pm860; 88pm80x
   - Add support for 24c08 EEPROM; at24
   - Add support for Broxton Whiskey Cove; intel*
   - Add support for RTS522A; rts5227
   - Add support for I2C devices; intel_quark_i2c_gpio

  New Functionality:
   - Add microphone support; arizona
   - Add general purpose switch support; arizona
   - Add fuel-gauge support; da9150-core
   - Add shutdown support; sec-core
   - Add charger support; tps65217
   - Add flexible serial communication unit support; atmel-flexcom
   - Add power button support; axp20x
   - Add led-flash support; rt5033

  Core Frameworks:
   - Supply a generic macro for defining Regmap IRQs
   - Rework ACPI child device matching

  Fix-ups:
   - Use Regmap to access registers; tps6105x
   - Use DEFINE_RES_IRQ_NAMED() macro; da9150
   - Re-arrange device registration order; intel_quark_i2c_gpio
   - Allow OF matching; cros_ec_i2c, atmel-hlcdc, hi6421-pmic, max8997, sm501
   - Handle deferred probe; twl6040
   - Improve accuracy of headphone detect; arizona
   - Unnecessary MODULE_ALIAS() removal; bcm590xx, rt5033
   - Remove unused code; htc-i2cpld, arizona, pcf50633-irq, sec-core
   - Simplify code; kempld, rts5209, da903x, lm3533, da9052, arizona
   - Remove #iffery; arizona
   - DT binding adaptions; many

  Bug Fixes:
   - Fix possible NULL pointer dereference; wm831x, tps6105x
   - Fix 64bit bug; intel_soc_pmic_bxtwc
   - Fix signedness issue; arizona"

* tag 'mfd-for-linus-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (73 commits)
  bindings: mfd: s2mps11: Add documentation for s2mps15 PMIC
  mfd: sec-core: Remove unused s2mpu02-rtc and s2mpu02-clk children
  extcon: arizona: Add extcon specific device tree binding document
  MAINTAINERS: Add binding docs for Cirrus Logic/Wolfson Arizona devices
  mfd: arizona: Remove bindings covered in new subsystem specific docs
  mfd: rt5033: Add RT5033 Flash led sub device
  mfd: lpss: Add Intel Broxton PCI IDs
  mfd: lpss: Add Broxton ACPI IDs
  mfd: arizona: Signedness bug in arizona_runtime_suspend()
  mfd: axp20x: Add a cell for the power button part of the, axp288 PMICs
  mfd: dt-bindings: Document pulled down WRSTBI pin on S2MPS1X
  mfd: sec-core: Disable buck voltage reset on watchdog falling edge
  mfd: sec-core: Dump PMIC revision to find out the HW
  mfd: arizona: Use correct type ID for device tree config
  mfd: arizona: Remove use of codec build config #ifdefs
  mfd: arizona: Simplify adding subdevices
  mfd: arizona: Downgrade type mismatch messages to dev_warn
  mfd: arizona: Factor out checking of jack detection state
  mfd: arizona: Factor out DCVDD isolation control
  mfd: Make TPS6105X select REGMAP_I2C
  ...

1 files changed, 6 insertions, 0 deletions

diff --git a/include/linux/mfd/rtsx_pci.h b/include/linux/mfd/rtsx_pci.h
index ff843e7ca23d..7eb7cbac0a9a 100644
--- a/include/linux/mfd/rtsx_pci.h
+++ b/include/linux/mfd/rtsx_pci.h
@@ -589,6 +589,7 @@
 #define   FORCE_ASPM_NO_ASPM		0x00
 #define PM_CLK_FORCE_CTL		0xFE58
 #define FUNC_FORCE_CTL			0xFE59
+#define   FUNC_FORCE_UPME_XMT_DBG	0x02
 #define PERST_GLITCH_WIDTH		0xFE5C
 #define CHANGE_LINK_STATE		0xFE5B
 #define RESET_LOAD_REG			0xFE5E
@@ -712,6 +713,7 @@
 #define PHY_RCR1			0x02
 #define   PHY_RCR1_ADP_TIME_4		0x0400
 #define   PHY_RCR1_VCO_COARSE		0x001F
+#define   PHY_RCR1_INIT_27S		0x0A1F
 #define PHY_SSCCR2			0x02
 #define   PHY_SSCCR2_PLL_NCODE		0x0A00
 #define   PHY_SSCCR2_TIME0		0x001C
@@ -724,6 +726,7 @@
 #define   PHY_RCR2_FREQSEL_12		0x0040
 #define   PHY_RCR2_CDR_SC_12P		0x0010
 #define   PHY_RCR2_CALIB_LATE		0x0002
+#define   PHY_RCR2_INIT_27S		0xC152
 #define PHY_SSCCR3			0x03
 #define   PHY_SSCCR3_STEP_IN		0x2740
 #define   PHY_SSCCR3_CHECK_DELAY	0x0008
@@ -800,12 +803,14 @@
 #define   PHY_ANA1A_RXT_BIST		0x0500
 #define   PHY_ANA1A_TXR_BIST		0x0040
 #define   PHY_ANA1A_REV			0x0006
+#define   PHY_FLD0_INIT_27S		0x2546
 #define PHY_FLD1			0x1B
 #define PHY_FLD2			0x1C
 #define PHY_FLD3			0x1D
 #define   PHY_FLD3_TIMER_4		0x0800
 #define   PHY_FLD3_TIMER_6		0x0020
 #define   PHY_FLD3_RXDELINK		0x0004
+#define   PHY_FLD3_INIT_27S		0x0004
 #define PHY_ANA1D			0x1D
 #define   PHY_ANA1D_DEBUG_ADDR		0x0004
 #define _PHY_FLD0			0x1D
@@ -824,6 +829,7 @@
 #define   PHY_FLD4_BER_COUNT		0x00E0
 #define   PHY_FLD4_BER_TIMER		0x000A
 #define   PHY_FLD4_BER_CHK_EN		0x0001
+#define   PHY_FLD4_INIT_27S		0x5C7F
 #define PHY_DIG1E			0x1E
 #define   PHY_DIG1E_REV			0x4000
 #define   PHY_DIG1E_D0_X_D1		0x1000