Merge tag 'mmc-updates-for-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc

Pull MMC updates from Chris Ball:
 "MMC highlights for 3.15:

  Core:
   - CONFIG_MMC_UNSAFE_RESUME=y is now default behavior
   - DT bindings for SDHCI UHS, eMMC HS200, high-speed DDR, at 1.8/1.2V
   - Add GPIO descriptor based slot-gpio card detect API

  Drivers:
   - dw_mmc: Refactor SOCFPGA support as a variant inside dw_mmc-pltfm.c
   - mmci: Support HW busy detection on ux500
   - omap: Support MMC_ERASE
   - omap_hsmmc: Support MMC_PM_KEEP_POWER, MMC_PM_WAKE_SDIO_IRQ, (a)cmd23
   - rtsx: Support pre-req/post-req async
   - sdhci: Add support for Realtek RTS5250 controllers
   - sdhci-acpi: Add support for 80860F16, fix 80860F14/SDIO card detect
   - sdhci-msm: Add new driver for Qualcomm SDHCI chipset support
   - sdhci-pxav3: Add support for Marvell Armada 380 and 385 SoCs"

* tag 'mmc-updates-for-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (102 commits)
  mmc: sdhci-acpi: Intel SDIO has broken card detect
  mmc: sdhci-pxav3: add support for the Armada 38x SDHCI controller
  mmc: sdhci-msm: Add platform_execute_tuning implementation
  mmc: sdhci-msm: Initial support for Qualcomm chipsets
  mmc: sdhci-msm: Qualcomm SDHCI binding documentation
  sdhci: only reprogram retuning timer when flag is set
  mmc: rename ARCH_BCM to ARCH_BCM_MOBILE
  mmc: sdhci: Allow for irq being shared
  mmc: sdhci-acpi: Add device id 80860F16
  mmc: sdhci-acpi: Fix broken card detect for ACPI HID 80860F14
  mmc: slot-gpio: Add GPIO descriptor based CD GPIO API
  mmc: slot-gpio: Split out CD IRQ request into a separate function
  mmc: slot-gpio: Record GPIO descriptors instead of GPIO numbers
  Revert "dts: socfpga: Add support for SD/MMC on the SOCFPGA platform"
  mmc: sdhci-spear: use generic card detection gpio support
  mmc: sdhci-spear: remove support for power gpio
  mmc: sdhci-spear: simplify resource handling
  mmc: sdhci-spear: fix platform_data usage
  mmc: sdhci-spear: fix error handling paths for DT
  mmc: sdhci-bcm-kona: fix build errors when built-in
  ...

5 files changed, 12 insertions, 21 deletions

diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h
index 87079fc38011..f206e29f94d7 100644
--- a/include/linux/mmc/core.h
+++ b/include/linux/mmc/core.h
@@ -95,7 +95,7 @@ struct mmc_command {
  *              actively failing requests
  */
 
-	unsigned int		cmd_timeout_ms;	/* in milliseconds */
+	unsigned int		busy_timeout;	/* busy detect timeout in ms */
 	/* Set this flag only for blocking sanitize request */
 	bool			sanitize_busy;
 
@@ -152,7 +152,7 @@ extern int mmc_wait_for_app_cmd(struct mmc_host *, struct mmc_card *,
 	struct mmc_command *, int);
 extern void mmc_start_bkops(struct mmc_card *card, bool from_exception);
 extern int __mmc_switch(struct mmc_card *, u8, u8, u8, unsigned int, bool,
-			bool);
+			bool, bool);
 extern int mmc_switch(struct mmc_card *, u8, u8, u8, unsigned int);
 extern int mmc_send_ext_csd(struct mmc_card *card, u8 *ext_csd);
 
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 99f5709ac343..cb61ea4d6945 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -264,15 +264,12 @@ struct mmc_host {
 	u32			caps2;		/* More host capabilities */
 
 #define MMC_CAP2_BOOTPART_NOACC	(1 << 0)	/* Boot partition no access */
-#define MMC_CAP2_CACHE_CTRL	(1 << 1)	/* Allow cache control */
 #define MMC_CAP2_FULL_PWR_CYCLE	(1 << 2)	/* Can do full power cycle */
 #define MMC_CAP2_NO_MULTI_READ	(1 << 3)	/* Multiblock reads don't work */
-#define MMC_CAP2_NO_SLEEP_CMD	(1 << 4)	/* Don't allow sleep command */
 #define MMC_CAP2_HS200_1_8V_SDR	(1 << 5)        /* can support */
 #define MMC_CAP2_HS200_1_2V_SDR	(1 << 6)        /* can support */
 #define MMC_CAP2_HS200		(MMC_CAP2_HS200_1_8V_SDR | \
 				 MMC_CAP2_HS200_1_2V_SDR)
-#define MMC_CAP2_BROKEN_VOLTAGE	(1 << 7)	/* Use the broken voltage */
 #define MMC_CAP2_HC_ERASE_SZ	(1 << 9)	/* High-capacity erase size */
 #define MMC_CAP2_CD_ACTIVE_HIGH	(1 << 10)	/* Card-detect signal active high */
 #define MMC_CAP2_RO_ACTIVE_HIGH	(1 << 11)	/* Write-protect signal active high */
@@ -281,7 +278,6 @@ struct mmc_host {
 #define MMC_CAP2_PACKED_CMD	(MMC_CAP2_PACKED_RD | \
 				 MMC_CAP2_PACKED_WR)
 #define MMC_CAP2_NO_PRESCAN_POWERUP (1 << 14)	/* Don't power up before scan */
-#define MMC_CAP2_SANITIZE	(1 << 15)		/* Support Sanitize */
 
 	mmc_pm_flag_t		pm_caps;	/* supported pm features */
 
@@ -304,7 +300,7 @@ struct mmc_host {
 	unsigned int		max_req_size;	/* maximum number of bytes in one req */
 	unsigned int		max_blk_size;	/* maximum size of one mmc block */
 	unsigned int		max_blk_count;	/* maximum number of blocks in one req */
-	unsigned int		max_discard_to;	/* max. discard timeout in ms */
+	unsigned int		max_busy_timeout; /* max busy timeout in ms */
 
 	/* private data */
 	spinlock_t		lock;		/* lock for claim and bus ops */
@@ -388,8 +384,6 @@ int mmc_power_restore_host(struct mmc_host *host);
 void mmc_detect_change(struct mmc_host *, unsigned long delay);
 void mmc_request_done(struct mmc_host *, struct mmc_request *);
 
-int mmc_cache_ctrl(struct mmc_host *, u8);
-
 static inline void mmc_signal_sdio_irq(struct mmc_host *host)
 {
 	host->ops->enable_sdio_irq(host, 0);
@@ -424,12 +418,9 @@ static inline int mmc_regulator_get_supply(struct mmc_host *mmc)
 
 int mmc_pm_notify(struct notifier_block *notify_block, unsigned long, void *);
 
-/* Module parameter */
-extern bool mmc_assume_removable;
-
 static inline int mmc_card_is_removable(struct mmc_host *host)
 {
-	return !(host->caps & MMC_CAP_NONREMOVABLE) && mmc_assume_removable;
+	return !(host->caps & MMC_CAP_NONREMOVABLE);
 }
 
 static inline int mmc_card_keep_power(struct mmc_host *host)
diff --git a/include/linux/mmc/sdhci-spear.h b/include/linux/mmc/sdhci-spear.h
index e78c0e236e9d..8cc095a76cf8 100644
--- a/include/linux/mmc/sdhci-spear.h
+++ b/include/linux/mmc/sdhci-spear.h
@@ -18,17 +18,9 @@
 /*
  * struct sdhci_plat_data: spear sdhci platform data structure
  *
- * @card_power_gpio: gpio pin for enabling/disabling power to sdhci socket
- * @power_active_high: if set, enable power to sdhci socket by setting
- *			card_power_gpio
- * @power_always_enb: If set, then enable power on probe, otherwise enable only
- *			on card insertion and disable on card removal.
  * card_int_gpio: gpio pin used for card detection
  */
 struct sdhci_plat_data {
-	int card_power_gpio;
-	int power_active_high;
-	int power_always_enb;
 	int card_int_gpio;
 };
 
diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h
index 362927c48f97..7be12b883485 100644
--- a/include/linux/mmc/sdhci.h
+++ b/include/linux/mmc/sdhci.h
@@ -100,6 +100,8 @@ struct sdhci_host {
 #define SDHCI_QUIRK2_BROKEN_HOST_CONTROL		(1<<5)
 /* Controller does not support HS200 */
 #define SDHCI_QUIRK2_BROKEN_HS200			(1<<6)
+/* Controller does not support DDR50 */
+#define SDHCI_QUIRK2_BROKEN_DDR50			(1<<7)
 
 	int irq;		/* Device IRQ */
 	void __iomem *ioaddr;	/* Mapped address */
diff --git a/include/linux/mmc/slot-gpio.h b/include/linux/mmc/slot-gpio.h
index b0c73e4cacea..d2433381e828 100644
--- a/include/linux/mmc/slot-gpio.h
+++ b/include/linux/mmc/slot-gpio.h
@@ -22,4 +22,10 @@ int mmc_gpio_request_cd(struct mmc_host *host, unsigned int gpio,
 			unsigned int debounce);
 void mmc_gpio_free_cd(struct mmc_host *host);
 
+int mmc_gpiod_request_cd(struct mmc_host *host, const char *con_id,
+			 unsigned int idx, bool override_active_level,
+			 unsigned int debounce);
+void mmc_gpiod_free_cd(struct mmc_host *host);
+void mmc_gpiod_request_cd_irq(struct mmc_host *host);
+
 #endif