Merge tag 'for-linus-3.4' of git://git.infradead.org/mtd-2.6

Pull MTD changes from David Woodhouse:
 - Artem's cleanup of the MTD API continues apace.
 - Fixes and improvements for ST FSMC and SuperH FLCTL NAND, amongst
   others.
 - More work on DiskOnChip G3, new driver for DiskOnChip G4.
 - Clean up debug/warning printks in JFFS2 to use pr_<level>.

Fix up various trivial conflicts, largely due to changes in calling
conventions for things like dmaengine_prep_slave_sg() (new inline
wrapper to hide new parameter, clashing with rewrite of previously last
parameter that used to be an 'append' flag, and is now a bitmap of
'unsigned long flags').

(Also some header file fallout - like so many merges this merge window -
and silly conflicts with sparse fixes)

* tag 'for-linus-3.4' of git://git.infradead.org/mtd-2.6: (120 commits)
  mtd: docg3 add protection against concurrency
  mtd: docg3 refactor cascade floors structure
  mtd: docg3 increase write/erase timeout
  mtd: docg3 fix inbound calculations
  mtd: nand: gpmi: fix function annotations
  mtd: phram: fix section mismatch for phram_setup
  mtd: unify initialization of erase_info->fail_addr
  mtd: support ONFI multi lun NAND
  mtd: sm_ftl: fix typo in major number.
  mtd: add device-tree support to spear_smi
  mtd: spear_smi: Remove default partition information from driver
  mtd: Add device-tree support to fsmc_nand
  mtd: fix section mismatch for doc_probe_device
  mtd: nand/fsmc: Remove sparse warnings and errors
  mtd: nand/fsmc: Add DMA support
  mtd: nand/fsmc: Access the NAND device word by word whenever possible
  mtd: nand/fsmc: Use dev_err to report error scenario
  mtd: nand/fsmc: Use devm routines
  mtd: nand/fsmc: Modify fsmc driver to accept nand timing parameters via platform
  mtd: fsmc_nand: add pm callbacks to support hibernation
  ...

1 files changed, 40 insertions, 0 deletions

diff --git a/include/linux/mtd/sh_flctl.h b/include/linux/mtd/sh_flctl.h
index 9cf4c4c79555..a38e1fa8af01 100644
--- a/include/linux/mtd/sh_flctl.h
+++ b/include/linux/mtd/sh_flctl.h
@@ -23,6 +23,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/pm_qos.h>
 
 /* FLCTL registers */
 #define FLCMNCR(f)		(f->reg + 0x0)
@@ -38,6 +39,7 @@
 #define FLDTFIFO(f)		(f->reg + 0x24)
 #define FLECFIFO(f)		(f->reg + 0x28)
 #define FLTRCR(f)		(f->reg + 0x2C)
+#define FLHOLDCR(f)		(f->reg + 0x38)
 #define	FL4ECCRESULT0(f)	(f->reg + 0x80)
 #define	FL4ECCRESULT1(f)	(f->reg + 0x84)
 #define	FL4ECCRESULT2(f)	(f->reg + 0x88)
@@ -67,6 +69,30 @@
 #define	CE0_ENABLE	(0x1 << 3)	/* Chip Enable 0 */
 #define	TYPESEL_SET	(0x1 << 0)
 
+/*
+ * Clock settings using the PULSEx registers from FLCMNCR
+ *
+ * Some hardware uses bits called PULSEx instead of FCKSEL_E and QTSEL_E
+ * to control the clock divider used between the High-Speed Peripheral Clock
+ * and the FLCTL internal clock. If so, use CLK_8_BIT_xxx for connecting 8 bit
+ * and CLK_16_BIT_xxx for connecting 16 bit bus bandwith NAND chips. For the 16
+ * bit version the divider is seperate for the pulse width of high and low
+ * signals.
+ */
+#define PULSE3	(0x1 << 27)
+#define PULSE2	(0x1 << 17)
+#define PULSE1	(0x1 << 15)
+#define PULSE0	(0x1 << 9)
+#define CLK_8B_0_5			PULSE1
+#define CLK_8B_1			0x0
+#define CLK_8B_1_5			(PULSE1 | PULSE2)
+#define CLK_8B_2			PULSE0
+#define CLK_8B_3			(PULSE0 | PULSE1 | PULSE2)
+#define CLK_8B_4			(PULSE0 | PULSE2)
+#define CLK_16B_6L_2H			PULSE0
+#define CLK_16B_9L_3H			(PULSE0 | PULSE1 | PULSE2)
+#define CLK_16B_12L_4H			(PULSE0 | PULSE2)
+
 /* FLCMDCR control bits */
 #define ADRCNT2_E	(0x1 << 31)	/* 5byte address enable */
 #define ADRMD_E		(0x1 << 26)	/* Sector address access */
@@ -85,6 +111,15 @@
 #define TRSTRT		(0x1 << 0)	/* translation start */
 #define TREND		(0x1 << 1)	/* translation end */
 
+/*
+ * FLHOLDCR control bits
+ *
+ * HOLDEN: Bus Occupancy Enable (inverted)
+ * Enable this bit when the external bus might be used in between transfers.
+ * If not set and the bus gets used by other modules, a deadlock occurs.
+ */
+#define HOLDEN		(0x1 << 0)
+
 /* FL4ECCCR control bits */
 #define	_4ECCFA		(0x1 << 2)	/* 4 symbols correct fault */
 #define	_4ECCEND	(0x1 << 1)	/* 4 symbols end */
@@ -97,6 +132,7 @@ struct sh_flctl {
 	struct mtd_info		mtd;
 	struct nand_chip	chip;
 	struct platform_device	*pdev;
+	struct dev_pm_qos_request pm_qos;
 	void __iomem		*reg;
 
 	uint8_t	done_buff[2048 + 64];	/* max size 2048 + 64 */
@@ -108,11 +144,14 @@ struct sh_flctl {
 	int	erase1_page_addr;	/* page_addr in ERASE1 cmd */
 	uint32_t erase_ADRCNT;		/* bits of FLCMDCR in ERASE1 cmd */
 	uint32_t rw_ADRCNT;	/* bits of FLCMDCR in READ WRITE cmd */
+	uint32_t flcmncr_base;	/* base value of FLCMNCR */
 
 	int	hwecc_cant_correct[4];
 
 	unsigned page_size:1;	/* NAND page size (0 = 512, 1 = 2048) */
 	unsigned hwecc:1;	/* Hardware ECC (0 = disabled, 1 = enabled) */
+	unsigned holden:1;	/* Hardware has FLHOLDCR and HOLDEN is set */
+	unsigned qos_request:1;	/* QoS request to prevent deep power shutdown */
 };
 
 struct sh_flctl_platform_data {
@@ -121,6 +160,7 @@ struct sh_flctl_platform_data {
 	unsigned long		flcmncr_val;
 
 	unsigned has_hwecc:1;
+	unsigned use_holden:1;
 };
 
 static inline struct sh_flctl *mtd_to_flctl(struct mtd_info *mtdinfo)