ARM: imx: Update spi_imx platform data to reflect current state

The docs for the spi_imx platform data still refer to a -32 offset used to
specify a native chip select.  This was removed in commit 602c8f4485cd
("spi: imx: fix use of native chip-selects with devicetree") and no
longer works as documented.  Update documentation.

The macro MXC_SPI_CS() is no longer is needed.

If a board uses all native chip selects, then it's not necessary to
specify a chip select array at all, as all native is the default (this is
how device-tree configured SPI masters work too).  Most of the spi-imx
platform data users have their chip select arrays removed by this patch.

This patch also fixes a bug in mx31moboard introduced in the '602 commit.
When that board was updated in commit 901f26bce64a ("ARM: imx: set
correct chip_select in platform setup") to reflect the SPI change, only
SPI bus 2 was updated and SPI bus 1 was left with non-sequential chip
selects.  The mc13783 spi device on bus 1 had its chip select updated as
if it were on bus 2.

CC: Sascha Hauer <kernel@pengutronix.de>
CC: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Greg Ungerer <gerg@linux-m68k.org>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

1 files changed, 17 insertions, 12 deletions

diff --git a/include/linux/platform_data/spi-imx.h b/include/linux/platform_data/spi-imx.h
index 6f012fefa1a2..328f670d10bd 100644
--- a/include/linux/platform_data/spi-imx.h
+++ b/include/linux/platform_data/spi-imx.h
@@ -5,24 +5,29 @@
 
 /*
  * struct spi_imx_master - device.platform_data for SPI controller devices.
- * @chipselect: Array of chipselects for this master. Numbers >= 0 mean gpio
- *              pins, numbers < 0 mean internal CSPI chipselects according
- *              to MXC_SPI_CS(). Normally you want to use gpio based chip
- *              selects as the CSPI module tries to be intelligent about
- *              when to assert the chipselect: The CSPI module deasserts the
- *              chipselect once it runs out of input data. The other problem
- *              is that it is not possible to mix between high active and low
- *              active chipselects on one single bus using the internal
- *              chipselects. Unfortunately Freescale decided to put some
+ * @chipselect: Array of chipselects for this master or NULL.  Numbers >= 0
+ *              mean GPIO pins, -ENOENT means internal CSPI chipselect
+ *              matching the position in the array.  E.g., if chipselect[1] =
+ *              -ENOENT then a SPI slave using chip select 1 will use the
+ *              native SS1 line of the CSPI.  Omitting the array will use
+ *              all native chip selects.
+
+ *              Normally you want to use gpio based chip selects as the CSPI
+ *              module tries to be intelligent about when to assert the
+ *              chipselect:  The CSPI module deasserts the chipselect once it
+ *              runs out of input data.  The other problem is that it is not
+ *              possible to mix between high active and low active chipselects
+ *              on one single bus using the internal chipselects.
+ *              Unfortunately, on some SoCs, Freescale decided to put some
  *              chipselects on dedicated pins which are not usable as gpios,
  *              so we have to support the internal chipselects.
- * @num_chipselect: ARRAY_SIZE(chipselect)
+ *
+ * @num_chipselect: If @chipselect is specified, ARRAY_SIZE(chipselect),
+ *                  otherwise the number of native chip selects.
  */
 struct spi_imx_master {
 	int	*chipselect;
 	int	num_chipselect;
 };
 
-#define MXC_SPI_CS(no)	((no) - 32)
-
 #endif /* __MACH_SPI_H_*/