serial: sh-sci: Add more register documentation

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Acked-by: Simon Horman <horms@verge.net.au>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 58 insertions, 35 deletions

diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h
index 22b3640c9424..6c5e3bb282b0 100644
--- a/include/linux/serial_sci.h
+++ b/include/linux/serial_sci.h
@@ -10,45 +10,59 @@
 
 #define SCIx_NOT_SUPPORTED	(-1)
 
-#define SCSCR_TIE	(1 << 7)
-#define SCSCR_RIE	(1 << 6)
-#define SCSCR_TE	(1 << 5)
-#define SCSCR_RE	(1 << 4)
-#define SCSCR_REIE	(1 << 3)	/* not supported by all parts */
-#define SCSCR_TOIE	(1 << 2)	/* not supported by all parts */
-#define SCSCR_CKE1	(1 << 1)
-#define SCSCR_CKE0	(1 << 0)
-
-/* SCxSR SCI */
-#define SCI_TDRE  0x80
-#define SCI_RDRF  0x40
-#define SCI_ORER  0x20
-#define SCI_FER   0x10
-#define SCI_PER   0x08
-#define SCI_TEND  0x04
+/* SCSMR (Serial Mode Register) */
+#define SCSMR_CHR	(1 << 6)	/* 7-bit Character Length */
+#define SCSMR_PE	(1 << 5)	/* Parity Enable */
+#define SCSMR_ODD	(1 << 4)	/* Odd Parity */
+#define SCSMR_STOP	(1 << 3)	/* Stop Bit Length */
+#define SCSMR_CKS	0x0003		/* Clock Select */
+
+/* Serial Control Register (@ = not supported by all parts) */
+#define SCSCR_TIE	(1 << 7)	/* Transmit Interrupt Enable */
+#define SCSCR_RIE	(1 << 6)	/* Receive Interrupt Enable */
+#define SCSCR_TE	(1 << 5)	/* Transmit Enable */
+#define SCSCR_RE	(1 << 4)	/* Receive Enable */
+#define SCSCR_REIE	(1 << 3)	/* Receive Error Interrupt Enable @ */
+#define SCSCR_TOIE	(1 << 2)	/* Timeout Interrupt Enable @ */
+#define SCSCR_CKE1	(1 << 1)	/* Clock Enable 1 */
+#define SCSCR_CKE0	(1 << 0)	/* Clock Enable 0 */
+/* SCIFA/SCIFB only */
+#define SCSCR_TDRQE	(1 << 15)	/* Tx Data Transfer Request Enable */
+#define SCSCR_RDRQE	(1 << 14)	/* Rx Data Transfer Request Enable */
+
+/* SCxSR (Serial Status Register) on SCI */
+#define SCI_TDRE  0x80			/* Transmit Data Register Empty */
+#define SCI_RDRF  0x40			/* Receive Data Register Full */
+#define SCI_ORER  0x20			/* Overrun Error */
+#define SCI_FER   0x10			/* Framing Error */
+#define SCI_PER   0x08			/* Parity Error */
+#define SCI_TEND  0x04			/* Transmit End */
 
 #define SCI_DEFAULT_ERROR_MASK (SCI_PER | SCI_FER)
 
-/* SCxSR SCIF, HSCIF */
-#define SCIF_ER    0x0080
-#define SCIF_TEND  0x0040
-#define SCIF_TDFE  0x0020
-#define SCIF_BRK   0x0010
-#define SCIF_FER   0x0008
-#define SCIF_PER   0x0004
-#define SCIF_RDF   0x0002
-#define SCIF_DR    0x0001
+/* SCxSR (Serial Status Register) on SCIF, HSCIF */
+#define SCIF_ER    0x0080		/* Receive Error */
+#define SCIF_TEND  0x0040		/* Transmission End */
+#define SCIF_TDFE  0x0020		/* Transmit FIFO Data Empty */
+#define SCIF_BRK   0x0010		/* Break Detect */
+#define SCIF_FER   0x0008		/* Framing Error */
+#define SCIF_PER   0x0004		/* Parity Error */
+#define SCIF_RDF   0x0002		/* Receive FIFO Data Full */
+#define SCIF_DR    0x0001		/* Receive Data Ready */
 
 #define SCIF_DEFAULT_ERROR_MASK (SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK)
 
-/* SCSPTR, optional */
-#define SCSPTR_RTSIO	(1 << 7)
-#define SCSPTR_CTSIO	(1 << 5)
-#define SCSPTR_SPB2IO	(1 << 1)
-#define SCSPTR_SPB2DT	(1 << 0)
+/* SCFCR (FIFO Control Register) */
+#define SCFCR_LOOP	(1 << 0)	/* Loopback Test */
+
+/* SCSPTR (Serial Port Register), optional */
+#define SCSPTR_RTSIO	(1 << 7)	/* Serial Port RTS Pin Input/Output */
+#define SCSPTR_CTSIO	(1 << 5)	/* Serial Port CTS Pin Input/Output */
+#define SCSPTR_SPB2IO	(1 << 1)	/* Serial Port Break Input/Output */
+#define SCSPTR_SPB2DT	(1 << 0)	/* Serial Port Break Data */
 
 /* HSSRR HSCIF */
-#define HSCIF_SRE	0x8000
+#define HSCIF_SRE	0x8000		/* Sampling Rate Register Enable */
 
 enum {
 	SCIx_PROBE_REGTYPE,
@@ -73,10 +87,19 @@ enum {
  * Not all registers will exist on all parts.
  */
 enum {
-	SCSMR, SCBRR, SCSCR, SCxSR,
-	SCFCR, SCFDR, SCxTDR, SCxRDR,
-	SCLSR, SCTFDR, SCRFDR, SCSPTR,
-	HSSRR,
+	SCSMR,				/* Serial Mode Register */
+	SCBRR,				/* Bit Rate Register */
+	SCSCR,				/* Serial Control Register */
+	SCxSR,				/* Serial Status Register */
+	SCFCR,				/* FIFO Control Register */
+	SCFDR,				/* FIFO Data Count Register */
+	SCxTDR,				/* Transmit (FIFO) Data Register */
+	SCxRDR,				/* Receive (FIFO) Data Register */
+	SCLSR,				/* Line Status Register */
+	SCTFDR,				/* Transmit FIFO Data Count Register */
+	SCRFDR,				/* Receive FIFO Data Count Register */
+	SCSPTR,				/* Serial Port Register */
+	HSSRR,				/* Sampling Rate Register */
 
 	SCIx_NR_REGS,
 };