ssb: Remove the old, now unused, data structures

The old, now unused, data structures and SPROM extraction routines
are removed.

Signed-off-by: Larry Finger<Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 0 insertions, 74 deletions

diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h
index 745de2aac85f..a21ab29ff363 100644
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
@@ -15,72 +15,8 @@ struct pcmcia_device;
 struct ssb_bus;
 struct ssb_driver;
 
-
-struct ssb_sprom_r1 {
-	u16 pci_spid;		/* Subsystem Product ID for PCI */
-	u16 pci_svid;		/* Subsystem Vendor ID for PCI */
-	u16 pci_pid;		/* Product ID for PCI */
-	u8 il0mac[6];		/* MAC address for 802.11b/g */
-	u8 et0mac[6];		/* MAC address for Ethernet */
-	u8 et1mac[6];		/* MAC address for 802.11a */
-	u8 et0phyaddr:5;	/* MII address for enet0 */
-	u8 et1phyaddr:5;	/* MII address for enet1 */
-	u8 et0mdcport:1;	/* MDIO for enet0 */
-	u8 et1mdcport:1;	/* MDIO for enet1 */
-	u8 board_rev;		/* Board revision */
-	u8 country_code:4;	/* Country Code */
-	u8 antenna_a:2;		/* Antenna 0/1 available for A-PHY */
-	u8 antenna_bg:2;	/* Antenna 0/1 available for B-PHY and G-PHY */
-	u16 pa0b0;
-	u16 pa0b1;
-	u16 pa0b2;
-	u16 pa1b0;
-	u16 pa1b1;
-	u16 pa1b2;
-	u8 gpio0;		/* GPIO pin 0 */
-	u8 gpio1;		/* GPIO pin 1 */
-	u8 gpio2;		/* GPIO pin 2 */
-	u8 gpio3;		/* GPIO pin 3 */
-	u16 maxpwr_a;		/* A-PHY Power Amplifier Max Power (in dBm Q5.2) */
-	u16 maxpwr_bg;		/* B/G-PHY Power Amplifier Max Power (in dBm Q5.2) */
-	u8 itssi_a;		/* Idle TSSI Target for A-PHY */
-	u8 itssi_bg;		/* Idle TSSI Target for B/G-PHY */
-	u16 boardflags_lo;	/* Boardflags (low 16 bits) */
-	u8 antenna_gain_a;	/* A-PHY Antenna gain (in dBm Q5.2) */
-	u8 antenna_gain_bg;	/* B/G-PHY Antenna gain (in dBm Q5.2) */
-	u8 oem[8];		/* OEM string (rev 1 only) */
-};
-
-struct ssb_sprom_r2 {
-	u16 boardflags_hi;	/* Boardflags (high 16 bits) */
-	u8 maxpwr_a_lo;		/* A-PHY Max Power Low */
-	u8 maxpwr_a_hi;		/* A-PHY Max Power High */
-	u16 pa1lob0;		/* A-PHY PA Low Settings */
-	u16 pa1lob1;		/* A-PHY PA Low Settings */
-	u16 pa1lob2;		/* A-PHY PA Low Settings */
-	u16 pa1hib0;		/* A-PHY PA High Settings */
-	u16 pa1hib1;		/* A-PHY PA High Settings */
-	u16 pa1hib2;		/* A-PHY PA High Settings */
-	u8 ofdm_pwr_off;	/* OFDM Power Offset from CCK Level */
-	u8 country_str[2];	/* Two char Country Code */
-};
-
-struct ssb_sprom_r3 {
-	u32 ofdmapo;		/* A-PHY OFDM Mid Power Offset */
-	u32 ofdmalpo;		/* A-PHY OFDM Low Power Offset */
-	u32 ofdmahpo;		/* A-PHY OFDM High Power Offset */
-	u8 gpioldc_on_cnt;	/* GPIO LED Powersave Duty Cycle ON count */
-	u8 gpioldc_off_cnt;	/* GPIO LED Powersave Duty Cycle OFF count */
-	u8 cckpo_1M:4;		/* CCK Power Offset for Rate 1M */
-	u8 cckpo_2M:4;		/* CCK Power Offset for Rate 2M */
-	u8 cckpo_55M:4;		/* CCK Power Offset for Rate 5.5M */
-	u8 cckpo_11M:4;		/* CCK Power Offset for Rate 11M */
-	u32 ofdmgpo;		/* G-PHY OFDM Power Offset */
-};
-
 struct ssb_sprom {
 	u8 revision;
-	u8 temp_fill[2 * sizeof(struct ssb_sprom_r1)];
 	u8 il0mac[6];		/* MAC address for 802.11b/g */
 	u8 et0mac[6];		/* MAC address for Ethernet */
 	u8 et1mac[6];		/* MAC address for 802.11a */
@@ -106,16 +42,6 @@ struct ssb_sprom {
 	u8 antenna_gain_bg;	/* B/G-PHY Antenna gain (in dBm Q5.2) */
 
 	/* TODO - add any parameters needed from rev 2, 3, or 4 SPROMs */
-	/* The valid r# fields are selected by the "revision".
-	 * Revision 3 and lower inherit from lower revisions.
-	 */
-	union {
-		struct {
-			struct ssb_sprom_r1 r1;
-			struct ssb_sprom_r2 r2;
-			struct ssb_sprom_r3 r3;
-		};
-	};
 };
 
 /* Information about the PCB the circuitry is soldered on. */