Merge tag 'usb-3.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg Kroah-Hartman:
 "Here are the USB patches against your 3.7-rc1 tree.

  There are the usual UABI header file movements, and we finally are now
  able to remove the dbg() macro that is over 15 years old (that had to
  wait for after some other trees got merged into yours during the big
  3.7-rc1 merge window.)

  Other than that, nothing major, just a number of bugfixes and new
  device ids.  It turns out that almost all of the usb-serial drivers
  had bugs in how they were handling their internal data, leaking
  memory, hence all of those fixups.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'usb-3.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (42 commits)
  USB: option: add more ZTE devices
  USB: option: blacklist net interface on ZTE devices
  usb: host: xhci: New system added for Compliance Mode Patch on SN65LVPE502CP
  USB: io_ti: fix sysfs-attribute creation
  USB: iuu_phoenix: fix sysfs-attribute creation
  USB: spcp8x5: fix port-data memory leak
  USB: ssu100: fix port-data memory leak
  USB: ti_usb_3410_5052: fix port-data memory leak
  USB: oti6858: fix port-data memory leak
  USB: iuu_phoenix: fix port-data memory leak
  USB: kl5kusb105: fix port-data memory leak
  USB: io_ti: fix port-data memory leak
  USB: keyspan_pda: fix port-data memory leak
  USB: f81232: fix port-data memory leak
  USB: io_edgeport: fix port-data memory leak
  USB: kobil_sct: fix port-data memory leak
  USB: cypress_m8: fix port-data memory leak
  usb: acm: fix the computation of the number of data bits
  usb: Missing dma_mask in ehci-vt8500.c when probed from device-tree
  usb: Missing dma_mask in uhci-platform.c when probed from device-tree
  ...

1 files changed, 0 insertions, 266 deletions

diff --git a/include/linux/usb/ch11.h b/include/linux/usb/ch11.h
deleted file mode 100644
index 7692dc69ccf7..000000000000
--- a/include/linux/usb/ch11.h
+++ /dev/null
@@ -1,266 +0,0 @@
-/*
- * This file holds Hub protocol constants and data structures that are
- * defined in chapter 11 (Hub Specification) of the USB 2.0 specification.
- *
- * It is used/shared between the USB core, the HCDs and couple of other USB
- * drivers.
- */
-
-#ifndef __LINUX_CH11_H
-#define __LINUX_CH11_H
-
-#include <linux/types.h>	/* __u8 etc */
-
-/*
- * Hub request types
- */
-
-#define USB_RT_HUB	(USB_TYPE_CLASS | USB_RECIP_DEVICE)
-#define USB_RT_PORT	(USB_TYPE_CLASS | USB_RECIP_OTHER)
-
-/*
- * Hub class requests
- * See USB 2.0 spec Table 11-16
- */
-#define HUB_CLEAR_TT_BUFFER	8
-#define HUB_RESET_TT		9
-#define HUB_GET_TT_STATE	10
-#define HUB_STOP_TT		11
-
-/*
- * Hub class additional requests defined by USB 3.0 spec
- * See USB 3.0 spec Table 10-6
- */
-#define HUB_SET_DEPTH		12
-#define HUB_GET_PORT_ERR_COUNT	13
-
-/*
- * Hub Class feature numbers
- * See USB 2.0 spec Table 11-17
- */
-#define C_HUB_LOCAL_POWER	0
-#define C_HUB_OVER_CURRENT	1
-
-/*
- * Port feature numbers
- * See USB 2.0 spec Table 11-17
- */
-#define USB_PORT_FEAT_CONNECTION	0
-#define USB_PORT_FEAT_ENABLE		1
-#define USB_PORT_FEAT_SUSPEND		2	/* L2 suspend */
-#define USB_PORT_FEAT_OVER_CURRENT	3
-#define USB_PORT_FEAT_RESET		4
-#define USB_PORT_FEAT_L1		5	/* L1 suspend */
-#define USB_PORT_FEAT_POWER		8
-#define USB_PORT_FEAT_LOWSPEED		9	/* Should never be used */
-#define USB_PORT_FEAT_C_CONNECTION	16
-#define USB_PORT_FEAT_C_ENABLE		17
-#define USB_PORT_FEAT_C_SUSPEND		18
-#define USB_PORT_FEAT_C_OVER_CURRENT	19
-#define USB_PORT_FEAT_C_RESET		20
-#define USB_PORT_FEAT_TEST              21
-#define USB_PORT_FEAT_INDICATOR         22
-#define USB_PORT_FEAT_C_PORT_L1         23
-
-/*
- * Port feature selectors added by USB 3.0 spec.
- * See USB 3.0 spec Table 10-7
- */
-#define USB_PORT_FEAT_LINK_STATE		5
-#define USB_PORT_FEAT_U1_TIMEOUT		23
-#define USB_PORT_FEAT_U2_TIMEOUT		24
-#define USB_PORT_FEAT_C_PORT_LINK_STATE		25
-#define USB_PORT_FEAT_C_PORT_CONFIG_ERROR	26
-#define USB_PORT_FEAT_REMOTE_WAKE_MASK		27
-#define USB_PORT_FEAT_BH_PORT_RESET		28
-#define USB_PORT_FEAT_C_BH_PORT_RESET		29
-#define USB_PORT_FEAT_FORCE_LINKPM_ACCEPT	30
-
-#define USB_PORT_LPM_TIMEOUT(p)			(((p) & 0xff) << 8)
-
-/* USB 3.0 hub remote wake mask bits, see table 10-14 */
-#define USB_PORT_FEAT_REMOTE_WAKE_CONNECT	(1 << 8)
-#define USB_PORT_FEAT_REMOTE_WAKE_DISCONNECT	(1 << 9)
-#define USB_PORT_FEAT_REMOTE_WAKE_OVER_CURRENT	(1 << 10)
-
-/*
- * Hub Status and Hub Change results
- * See USB 2.0 spec Table 11-19 and Table 11-20
- */
-struct usb_port_status {
-	__le16 wPortStatus;
-	__le16 wPortChange;
-} __attribute__ ((packed));
-
-/*
- * wPortStatus bit field
- * See USB 2.0 spec Table 11-21
- */
-#define USB_PORT_STAT_CONNECTION	0x0001
-#define USB_PORT_STAT_ENABLE		0x0002
-#define USB_PORT_STAT_SUSPEND		0x0004
-#define USB_PORT_STAT_OVERCURRENT	0x0008
-#define USB_PORT_STAT_RESET		0x0010
-#define USB_PORT_STAT_L1		0x0020
-/* bits 6 to 7 are reserved */
-#define USB_PORT_STAT_POWER		0x0100
-#define USB_PORT_STAT_LOW_SPEED		0x0200
-#define USB_PORT_STAT_HIGH_SPEED        0x0400
-#define USB_PORT_STAT_TEST              0x0800
-#define USB_PORT_STAT_INDICATOR         0x1000
-/* bits 13 to 15 are reserved */
-
-/*
- * Additions to wPortStatus bit field from USB 3.0
- * See USB 3.0 spec Table 10-10
- */
-#define USB_PORT_STAT_LINK_STATE	0x01e0
-#define USB_SS_PORT_STAT_POWER		0x0200
-#define USB_SS_PORT_STAT_SPEED		0x1c00
-#define USB_PORT_STAT_SPEED_5GBPS	0x0000
-/* Valid only if port is enabled */
-/* Bits that are the same from USB 2.0 */
-#define USB_SS_PORT_STAT_MASK (USB_PORT_STAT_CONNECTION |	    \
-				USB_PORT_STAT_ENABLE |	    \
-				USB_PORT_STAT_OVERCURRENT | \
-				USB_PORT_STAT_RESET)
-
-/*
- * Definitions for PORT_LINK_STATE values
- * (bits 5-8) in wPortStatus
- */
-#define USB_SS_PORT_LS_U0		0x0000
-#define USB_SS_PORT_LS_U1		0x0020
-#define USB_SS_PORT_LS_U2		0x0040
-#define USB_SS_PORT_LS_U3		0x0060
-#define USB_SS_PORT_LS_SS_DISABLED	0x0080
-#define USB_SS_PORT_LS_RX_DETECT	0x00a0
-#define USB_SS_PORT_LS_SS_INACTIVE	0x00c0
-#define USB_SS_PORT_LS_POLLING		0x00e0
-#define USB_SS_PORT_LS_RECOVERY		0x0100
-#define USB_SS_PORT_LS_HOT_RESET	0x0120
-#define USB_SS_PORT_LS_COMP_MOD		0x0140
-#define USB_SS_PORT_LS_LOOPBACK		0x0160
-
-/*
- * wPortChange bit field
- * See USB 2.0 spec Table 11-22 and USB 2.0 LPM ECN Table-4.10
- * Bits 0 to 5 shown, bits 6 to 15 are reserved
- */
-#define USB_PORT_STAT_C_CONNECTION	0x0001
-#define USB_PORT_STAT_C_ENABLE		0x0002
-#define USB_PORT_STAT_C_SUSPEND		0x0004
-#define USB_PORT_STAT_C_OVERCURRENT	0x0008
-#define USB_PORT_STAT_C_RESET		0x0010
-#define USB_PORT_STAT_C_L1		0x0020
-/*
- * USB 3.0 wPortChange bit fields
- * See USB 3.0 spec Table 10-11
- */
-#define USB_PORT_STAT_C_BH_RESET	0x0020
-#define USB_PORT_STAT_C_LINK_STATE	0x0040
-#define USB_PORT_STAT_C_CONFIG_ERROR	0x0080
-
-/*
- * wHubCharacteristics (masks)
- * See USB 2.0 spec Table 11-13, offset 3
- */
-#define HUB_CHAR_LPSM		0x0003 /* Logical Power Switching Mode mask */
-#define HUB_CHAR_COMMON_LPSM	0x0000 /* All ports power control at once */
-#define HUB_CHAR_INDV_PORT_LPSM	0x0001 /* per-port power control */
-#define HUB_CHAR_NO_LPSM	0x0002 /* no power switching */
-
-#define HUB_CHAR_COMPOUND	0x0004 /* hub is part of a compound device */
-
-#define HUB_CHAR_OCPM		0x0018 /* Over-Current Protection Mode mask */
-#define HUB_CHAR_COMMON_OCPM	0x0000 /* All ports Over-Current reporting */
-#define HUB_CHAR_INDV_PORT_OCPM	0x0008 /* per-port Over-current reporting */
-#define HUB_CHAR_NO_OCPM	0x0010 /* No Over-current Protection support */
-
-#define HUB_CHAR_TTTT		0x0060 /* TT Think Time mask */
-#define HUB_CHAR_PORTIND	0x0080 /* per-port indicators (LEDs) */
-
-struct usb_hub_status {
-	__le16 wHubStatus;
-	__le16 wHubChange;
-} __attribute__ ((packed));
-
-/*
- * Hub Status & Hub Change bit masks
- * See USB 2.0 spec Table 11-19 and Table 11-20
- * Bits 0 and 1 for wHubStatus and wHubChange
- * Bits 2 to 15 are reserved for both
- */
-#define HUB_STATUS_LOCAL_POWER	0x0001
-#define HUB_STATUS_OVERCURRENT	0x0002
-#define HUB_CHANGE_LOCAL_POWER	0x0001
-#define HUB_CHANGE_OVERCURRENT	0x0002
-
-
-/*
- * Hub descriptor
- * See USB 2.0 spec Table 11-13
- */
-
-#define USB_DT_HUB			(USB_TYPE_CLASS | 0x09)
-#define USB_DT_SS_HUB			(USB_TYPE_CLASS | 0x0a)
-#define USB_DT_HUB_NONVAR_SIZE		7
-#define USB_DT_SS_HUB_SIZE              12
-
-/*
- * Hub Device descriptor
- * USB Hub class device protocols
- */
-
-#define USB_HUB_PR_FS		0 /* Full speed hub */
-#define USB_HUB_PR_HS_NO_TT	0 /* Hi-speed hub without TT */
-#define USB_HUB_PR_HS_SINGLE_TT	1 /* Hi-speed hub with single TT */
-#define USB_HUB_PR_HS_MULTI_TT	2 /* Hi-speed hub with multiple TT */
-#define USB_HUB_PR_SS		3 /* Super speed hub */
-
-struct usb_hub_descriptor {
-	__u8  bDescLength;
-	__u8  bDescriptorType;
-	__u8  bNbrPorts;
-	__le16 wHubCharacteristics;
-	__u8  bPwrOn2PwrGood;
-	__u8  bHubContrCurrent;
-
-	/* 2.0 and 3.0 hubs differ here */
-	union {
-		struct {
-			/* add 1 bit for hub status change; round to bytes */
-			__u8  DeviceRemovable[(USB_MAXCHILDREN + 1 + 7) / 8];
-			__u8  PortPwrCtrlMask[(USB_MAXCHILDREN + 1 + 7) / 8];
-		}  __attribute__ ((packed)) hs;
-
-		struct {
-			__u8 bHubHdrDecLat;
-			__le16 wHubDelay;
-			__le16 DeviceRemovable;
-		}  __attribute__ ((packed)) ss;
-	} u;
-} __attribute__ ((packed));
-
-/* port indicator status selectors, tables 11-7 and 11-25 */
-#define HUB_LED_AUTO	0
-#define HUB_LED_AMBER	1
-#define HUB_LED_GREEN	2
-#define HUB_LED_OFF	3
-
-enum hub_led_mode {
-	INDICATOR_AUTO = 0,
-	INDICATOR_CYCLE,
-	/* software blinks for attention:  software, hardware, reserved */
-	INDICATOR_GREEN_BLINK, INDICATOR_GREEN_BLINK_OFF,
-	INDICATOR_AMBER_BLINK, INDICATOR_AMBER_BLINK_OFF,
-	INDICATOR_ALT_BLINK, INDICATOR_ALT_BLINK_OFF
-} __attribute__ ((packed));
-
-/* Transaction Translator Think Times, in bits */
-#define HUB_TTTT_8_BITS		0x00
-#define HUB_TTTT_16_BITS	0x20
-#define HUB_TTTT_24_BITS	0x40
-#define HUB_TTTT_32_BITS	0x60
-
-#endif /* __LINUX_CH11_H */