diff options
author | Robin H. Johnson <robbat2@gentoo.org> | 2011-10-24 22:30:08 +0000 |
---|---|---|
committer | James Bottomley <JBottomley@Parallels.com> | 2011-10-31 13:29:01 +0400 |
commit | 99a700bcc75429ba84a672d04f0b650dcc5b3042 (patch) | |
tree | 59b428e365e92e274139e3f489a1780b2be3d4bc /include/linux | |
parent | 907c07d45199f954ddcf66c2c9763c87d012cb15 (diff) |
[SCSI] mv_sas: OCZ RevoDrive3 & zDrive R4 support
In the OCZ RevoDrive3/zDrive R4 series, the "OCZ SuperScale Storage
Controller" with "Virtualized Controller Architecture 2.0" really seems
to be a Marvell 88SE9485 part, with OCZ firmware/BIOS.
Developed and tested on OCZ RevoDrive3 120GB [PCI 1b85:1021]
Should work on:
- OCZ RevoDrive3 (2x SandForce 2281)
- OCZ RevoDrive3 X2 (4x SandForce 2281)
- OCZ zDrive R4 CM84 (4x SandForce 2281)
- OCZ zDrive R4 CM88 (8x SandForce 2281)
- OCZ zDrive R4 RM84 (4x SandForce 2582)
- OCZ zDrive R4 RM88 (8x SandForce 2582)
All of this because a friend recently bought a OCZ RevoDrive3 and was
bitten by the lack of Linux support.
Notes from testing:
-------------------
- SMART works.
- VPD Device Identification is "OCZ-REVODRIVE3"
- Thin provisioning/TRIM seems to be implemented as WRITE SAME UNMAP,
with deterministic (non-zero) read after TRIM, but I'm not sure if it
works 100% in my testing.
- Some of the tuning in the firmware seems to ensure much better
performance when in a RAID0 setup than using the two devices
seperately.
I have not tested booting from the SSD, because all of this was
developed and tested remotely from the actual hardware.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Thanks-To: Gordon Pritchard <gordp@sfu.ca>
Acked-by: Xiangliang Yu <yuxiangl@marvell.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Diffstat (limited to 'include/linux')
-rw-r--r-- | include/linux/pci_ids.h | 2 |
1 files changed, 2 insertions, 0 deletions
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 1679ff6931f9..3fdf251389de 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2873,3 +2873,5 @@ #define PCI_VENDOR_ID_XEN 0x5853 #define PCI_DEVICE_ID_XEN_PLATFORM 0x0001 + +#define PCI_VENDOR_ID_OCZ 0x1b85 |