summaryrefslogtreecommitdiff
path: root/include/linux
diff options
context:
space:
mode:
authorHaavard Skinnemoen <haavard.skinnemoen@atmel.com>2008-07-08 11:59:42 -0700
committerDan Williams <dan.j.williams@intel.com>2008-07-08 11:59:42 -0700
commit3bfb1d20b547a5071d01344581eac5846ea84491 (patch)
tree3cdbd3b5d59c93f257573cc894db2a000698f02b /include/linux
parentdc0ee6435cb92ccc81b14ff28d163fecc5a7f120 (diff)
dmaengine: Driver for the Synopsys DesignWare DMA controller
This adds a driver for the Synopsys DesignWare DMA controller (aka DMACA on AVR32 systems.) This DMA controller can be found integrated on the AT32AP7000 chip and is primarily meant for peripheral DMA transfer, but can also be used for memory-to-memory transfers. This patch is based on a driver from David Brownell which was based on an older version of the DMA Engine framework. It also implements the proposed extensions to the DMA Engine API for slave DMA operations. The dmatest client shows no problems, but there may still be room for improvement performance-wise. DMA slave transfer performance is definitely "good enough"; reading 100 MiB from an SD card running at ~20 MHz yields ~7.2 MiB/s average transfer rate. Full documentation for this controller can be found in the Synopsys DW AHB DMAC Databook: http://www.synopsys.com/designware/docs/iip/DW_ahb_dmac/latest/doc/dw_ahb_dmac_db.pdf The controller has lots of implementation options, so it's usually a good idea to check the data sheet of the chip it's intergrated on as well. The AT32AP7000 data sheet can be found here: http://www.atmel.com/dyn/products/datasheets.asp?family_id=682 Changes since v4: * Use client_count instead of dma_chan_is_in_use() * Add missing include * Unmap buffers unless client told us not to Changes since v3: * Update to latest DMA engine and DMA slave APIs * Embed the hw descriptor into the sw descriptor * Clean up and update MODULE_DESCRIPTION, copyright date, etc. Changes since v2: * Dequeue all pending transfers in terminate_all() * Rename dw_dmac.h -> dw_dmac_regs.h * Define and use controller-specific dma_slave data * Fix up a few outdated comments * Define hardware registers as structs (doesn't generate better code, unfortunately, but it looks nicer.) * Get number of channels from platform_data instead of hardcoding it based on CONFIG_WHATEVER_CPU. * Give slave clients exclusive access to the channel Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>, Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Diffstat (limited to 'include/linux')
-rw-r--r--include/linux/dw_dmac.h62
1 files changed, 62 insertions, 0 deletions
diff --git a/include/linux/dw_dmac.h b/include/linux/dw_dmac.h
new file mode 100644
index 000000000000..04d217b442bf
--- /dev/null
+++ b/include/linux/dw_dmac.h
@@ -0,0 +1,62 @@
+/*
+ * Driver for the Synopsys DesignWare DMA Controller (aka DMACA on
+ * AVR32 systems.)
+ *
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef DW_DMAC_H
+#define DW_DMAC_H
+
+#include <linux/dmaengine.h>
+
+/**
+ * struct dw_dma_platform_data - Controller configuration parameters
+ * @nr_channels: Number of channels supported by hardware (max 8)
+ */
+struct dw_dma_platform_data {
+ unsigned int nr_channels;
+};
+
+/**
+ * struct dw_dma_slave - Controller-specific information about a slave
+ * @slave: Generic information about the slave
+ * @ctl_lo: Platform-specific initializer for the CTL_LO register
+ * @cfg_hi: Platform-specific initializer for the CFG_HI register
+ * @cfg_lo: Platform-specific initializer for the CFG_LO register
+ */
+struct dw_dma_slave {
+ struct dma_slave slave;
+ u32 cfg_hi;
+ u32 cfg_lo;
+};
+
+/* Platform-configurable bits in CFG_HI */
+#define DWC_CFGH_FCMODE (1 << 0)
+#define DWC_CFGH_FIFO_MODE (1 << 1)
+#define DWC_CFGH_PROTCTL(x) ((x) << 2)
+#define DWC_CFGH_SRC_PER(x) ((x) << 7)
+#define DWC_CFGH_DST_PER(x) ((x) << 11)
+
+/* Platform-configurable bits in CFG_LO */
+#define DWC_CFGL_PRIO(x) ((x) << 5) /* priority */
+#define DWC_CFGL_LOCK_CH_XFER (0 << 12) /* scope of LOCK_CH */
+#define DWC_CFGL_LOCK_CH_BLOCK (1 << 12)
+#define DWC_CFGL_LOCK_CH_XACT (2 << 12)
+#define DWC_CFGL_LOCK_BUS_XFER (0 << 14) /* scope of LOCK_BUS */
+#define DWC_CFGL_LOCK_BUS_BLOCK (1 << 14)
+#define DWC_CFGL_LOCK_BUS_XACT (2 << 14)
+#define DWC_CFGL_LOCK_CH (1 << 15) /* channel lockout */
+#define DWC_CFGL_LOCK_BUS (1 << 16) /* busmaster lockout */
+#define DWC_CFGL_HS_DST_POL (1 << 18) /* dst handshake active low */
+#define DWC_CFGL_HS_SRC_POL (1 << 19) /* src handshake active low */
+
+static inline struct dw_dma_slave *to_dw_dma_slave(struct dma_slave *slave)
+{
+ return container_of(slave, struct dw_dma_slave, slave);
+}
+
+#endif /* DW_DMAC_H */