Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (166 commits)
  Revert "ax25: zero length frame filtering in AX25"
  Revert "netrom: zero length frame filtering in NetRom"
  cfg80211: default CONFIG_WIRELESS_OLD_REGULATORY to n
  mac80211/iwlwifi: move virtual A-MDPU queue bookkeeping to iwlwifi
  mac80211: fix aggregation to not require queue stop
  mac80211: add skb length sanity checking
  mac80211: unify and fix TX aggregation start
  mac80211: clean up __ieee80211_tx args
  mac80211: rework the pending packets code
  mac80211: fix A-MPDU queue assignment
  mac80211: rewrite fragmentation
  iwlwifi: show current driver status in user readable format
  b43: Add BCM4307 PCI-ID
  cfg80211: fix locking in nl80211_set_wiphy
  mac80211: fix RX path
  ath5k: properly drop packets from ops->tx
  ar9170: single module build
  ath9k: fix dma mapping leak of rx buffer upon rmmod
  rt2x00: New USB ID for rt73usb
  ath5k: warn and correct rate for unknown hw rate indexes
  ...

6 files changed, 129 insertions, 3 deletions

diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index b1bb817d1427..4b501b48ce86 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -18,6 +18,22 @@
 #include <linux/types.h>
 #include <asm/byteorder.h>
 
+/*
+ * DS bit usage
+ *
+ * TA = transmitter address
+ * RA = receiver address
+ * DA = destination address
+ * SA = source address
+ *
+ * ToDS    FromDS  A1(RA)  A2(TA)  A3      A4      Use
+ * -----------------------------------------------------------------
+ *  0       0       DA      SA      BSSID   -       IBSS/DLS
+ *  0       1       DA      BSSID   SA      -       AP -> STA
+ *  1       0       BSSID   SA      DA      -       AP <- STA
+ *  1       1       RA      TA      DA      SA      unspecified (WDS)
+ */
+
 #define FCS_LEN 4
 
 #define IEEE80211_FCTL_VERS		0x0003
@@ -851,6 +867,7 @@ struct ieee80211_ht_info {
 /* Authentication algorithms */
 #define WLAN_AUTH_OPEN 0
 #define WLAN_AUTH_SHARED_KEY 1
+#define WLAN_AUTH_FT 2
 #define WLAN_AUTH_LEAP 128
 
 #define WLAN_AUTH_CHALLENGE_LEN 128
diff --git a/include/linux/if_frad.h b/include/linux/if_frad.h
index 60e16a551dd6..673f2209453d 100644
--- a/include/linux/if_frad.h
+++ b/include/linux/if_frad.h
@@ -153,7 +153,6 @@ struct frhdr
 
 struct dlci_local
 {
-   struct net_device_stats stats;
    struct net_device      *master;
    struct net_device      *slave;
    struct dlci_conf       config;
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index be3ebd7e8ce5..1b55952a17f6 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -32,6 +32,7 @@
 #ifdef __KERNEL__
 #include <linux/timer.h>
 #include <linux/delay.h>
+#include <linux/mm.h>
 #include <asm/atomic.h>
 #include <asm/cache.h>
 #include <asm/byteorder.h>
diff --git a/include/linux/netfilter/x_tables.h b/include/linux/netfilter/x_tables.h
index adbc50a20ec2..7b1a652066c0 100644
--- a/include/linux/netfilter/x_tables.h
+++ b/include/linux/netfilter/x_tables.h
@@ -437,6 +437,29 @@ extern void xt_free_table_info(struct xt_table_info *info);
 extern void xt_table_entry_swap_rcu(struct xt_table_info *old,
 				    struct xt_table_info *new);
 
+/*
+ * This helper is performance critical and must be inlined
+ */
+static inline unsigned long ifname_compare_aligned(const char *_a,
+						   const char *_b,
+						   const char *_mask)
+{
+	const unsigned long *a = (const unsigned long *)_a;
+	const unsigned long *b = (const unsigned long *)_b;
+	const unsigned long *mask = (const unsigned long *)_mask;
+	unsigned long ret;
+
+	ret = (a[0] ^ b[0]) & mask[0];
+	if (IFNAMSIZ > sizeof(unsigned long))
+		ret |= (a[1] ^ b[1]) & mask[1];
+	if (IFNAMSIZ > 2 * sizeof(unsigned long))
+		ret |= (a[2] ^ b[2]) & mask[2];
+	if (IFNAMSIZ > 3 * sizeof(unsigned long))
+		ret |= (a[3] ^ b[3]) & mask[3];
+	BUILD_BUG_ON(IFNAMSIZ > 4 * sizeof(unsigned long));
+	return ret;
+}
+
 #ifdef CONFIG_COMPAT
 #include <net/compat.h>
 
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index f33aa08dd9b3..cbe8ce3bf486 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -142,6 +142,12 @@
  *	%NL80211_ATTR_IE. If the command succeeds, the requested data will be
  *	added to all specified management frames generated by
  *	kernel/firmware/driver.
+ *	Note: This command has been removed and it is only reserved at this
+ *	point to avoid re-using existing command number. The functionality this
+ *	command was planned for has been provided with cleaner design with the
+ *	option to specify additional IEs in NL80211_CMD_TRIGGER_SCAN,
+ *	NL80211_CMD_AUTHENTICATE, NL80211_CMD_ASSOCIATE,
+ *	NL80211_CMD_DEAUTHENTICATE, and NL80211_CMD_DISASSOCIATE.
  *
  * @NL80211_CMD_GET_SCAN: get scan results
  * @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters
@@ -161,6 +167,38 @@
  * 	%NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on
  * 	to (%NL80211_ATTR_REG_ALPHA2).
  *
+ * @NL80211_CMD_AUTHENTICATE: authentication request and notification.
+ *	This command is used both as a command (request to authenticate) and
+ *	as an event on the "mlme" multicast group indicating completion of the
+ *	authentication process.
+ *	When used as a command, %NL80211_ATTR_IFINDEX is used to identify the
+ *	interface. %NL80211_ATTR_MAC is used to specify PeerSTAAddress (and
+ *	BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify
+ *	the SSID (mainly for association, but is included in authentication
+ *	request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ is used
+ *	to specify the frequence of the channel in MHz. %NL80211_ATTR_AUTH_TYPE
+ *	is used to specify the authentication type. %NL80211_ATTR_IE is used to
+ *	define IEs (VendorSpecificInfo, but also including RSN IE and FT IEs)
+ *	to be added to the frame.
+ *	When used as an event, this reports reception of an Authentication
+ *	frame in station and IBSS modes when the local MLME processed the
+ *	frame, i.e., it was for the local STA and was received in correct
+ *	state. This is similar to MLME-AUTHENTICATE.confirm primitive in the
+ *	MLME SAP interface (kernel providing MLME, userspace SME). The
+ *	included NL80211_ATTR_FRAME attribute contains the management frame
+ *	(including both the header and frame body, but not FCS).
+ * @NL80211_CMD_ASSOCIATE: association request and notification; like
+ *	NL80211_CMD_AUTHENTICATE but for Association and Reassociation
+ *	(similar to MLME-ASSOCIATE.request, MLME-REASSOCIATE.request,
+ *	MLME-ASSOCIATE.confirm or MLME-REASSOCIATE.confirm primitives).
+ * @NL80211_CMD_DEAUTHENTICATE: deauthentication request and notification; like
+ *	NL80211_CMD_AUTHENTICATE but for Deauthentication frames (similar to
+ *	MLME-DEAUTHENTICATION.request and MLME-DEAUTHENTICATE.indication
+ *	primitives).
+ * @NL80211_CMD_DISASSOCIATE: disassociation request and notification; like
+ *	NL80211_CMD_AUTHENTICATE but for Disassociation frames (similar to
+ *	MLME-DISASSOCIATE.request and MLME-DISASSOCIATE.indication primitives).
+ *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -206,7 +244,7 @@ enum nl80211_commands {
 	NL80211_CMD_GET_MESH_PARAMS,
 	NL80211_CMD_SET_MESH_PARAMS,
 
-	NL80211_CMD_SET_MGMT_EXTRA_IE,
+	NL80211_CMD_SET_MGMT_EXTRA_IE /* reserved; not used */,
 
 	NL80211_CMD_GET_REG,
 
@@ -217,6 +255,11 @@ enum nl80211_commands {
 
 	NL80211_CMD_REG_CHANGE,
 
+	NL80211_CMD_AUTHENTICATE,
+	NL80211_CMD_ASSOCIATE,
+	NL80211_CMD_DEAUTHENTICATE,
+	NL80211_CMD_DISASSOCIATE,
+
 	/* add new commands above here */
 
 	/* used to define NL80211_CMD_MAX below */
@@ -230,8 +273,11 @@ enum nl80211_commands {
  */
 #define NL80211_CMD_SET_BSS NL80211_CMD_SET_BSS
 #define NL80211_CMD_SET_MGMT_EXTRA_IE NL80211_CMD_SET_MGMT_EXTRA_IE
-
 #define NL80211_CMD_REG_CHANGE NL80211_CMD_REG_CHANGE
+#define NL80211_CMD_AUTHENTICATE NL80211_CMD_AUTHENTICATE
+#define NL80211_CMD_ASSOCIATE NL80211_CMD_ASSOCIATE
+#define NL80211_CMD_DEAUTHENTICATE NL80211_CMD_DEAUTHENTICATE
+#define NL80211_CMD_DISASSOCIATE NL80211_CMD_DISASSOCIATE
 
 /**
  * enum nl80211_attrs - nl80211 netlink attributes
@@ -349,6 +395,19 @@ enum nl80211_commands {
  * @NL80211_ATTR_REG_TYPE: indicates the type of the regulatory domain currently
  * 	set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*)
  *
+ * @NL80211_ATTR_SUPPORTED_COMMANDS: wiphy attribute that specifies
+ *	an array of command numbers (i.e. a mapping index to command number)
+ *	that the driver for the given wiphy supports.
+ *
+ * @NL80211_ATTR_FRAME: frame data (binary attribute), including frame header
+ *	and body, but not FCS; used, e.g., with NL80211_CMD_AUTHENTICATE and
+ *	NL80211_CMD_ASSOCIATE events
+ * @NL80211_ATTR_SSID: SSID (binary attribute, 0..32 octets)
+ * @NL80211_ATTR_AUTH_TYPE: AuthenticationType, see &enum nl80211_auth_type,
+ *	represented as a u32
+ * @NL80211_ATTR_REASON_CODE: ReasonCode for %NL80211_CMD_DEAUTHENTICATE and
+ *	%NL80211_CMD_DISASSOCIATE, u16
+ *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
  */
@@ -426,6 +485,13 @@ enum nl80211_attrs {
 	NL80211_ATTR_REG_INITIATOR,
 	NL80211_ATTR_REG_TYPE,
 
+	NL80211_ATTR_SUPPORTED_COMMANDS,
+
+	NL80211_ATTR_FRAME,
+	NL80211_ATTR_SSID,
+	NL80211_ATTR_AUTH_TYPE,
+	NL80211_ATTR_REASON_CODE,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -445,6 +511,10 @@ enum nl80211_attrs {
 #define NL80211_ATTR_IE NL80211_ATTR_IE
 #define NL80211_ATTR_REG_INITIATOR NL80211_ATTR_REG_INITIATOR
 #define NL80211_ATTR_REG_TYPE NL80211_ATTR_REG_TYPE
+#define NL80211_ATTR_FRAME NL80211_ATTR_FRAME
+#define NL80211_ATTR_SSID NL80211_ATTR_SSID
+#define NL80211_ATTR_AUTH_TYPE NL80211_ATTR_AUTH_TYPE
+#define NL80211_ATTR_REASON_CODE NL80211_ATTR_REASON_CODE
 
 #define NL80211_MAX_SUPP_RATES			32
 #define NL80211_MAX_SUPP_REG_RULES		32
@@ -978,4 +1048,18 @@ enum nl80211_bss {
 	NL80211_BSS_MAX = __NL80211_BSS_AFTER_LAST - 1
 };
 
+/**
+ * enum nl80211_auth_type - AuthenticationType
+ *
+ * @NL80211_AUTHTYPE_OPEN_SYSTEM: Open System authentication
+ * @NL80211_AUTHTYPE_SHARED_KEY: Shared Key authentication (WEP only)
+ * @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r)
+ * @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP)
+ */
+enum nl80211_auth_type {
+	NL80211_AUTHTYPE_OPEN_SYSTEM,
+	NL80211_AUTHTYPE_SHARED_KEY,
+	NL80211_AUTHTYPE_FT,
+	NL80211_AUTHTYPE_NETWORK_EAP,
+};
 #endif /* __LINUX_NL80211_H */
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 097f410edefa..05dfa7c4fb64 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2271,6 +2271,8 @@
 #define PCI_DEVICE_ID_KORENIX_JETCARDF0	0x1600
 #define PCI_DEVICE_ID_KORENIX_JETCARDF1	0x16ff
 
+#define PCI_VENDOR_ID_QMI		0x1a32
+
 #define PCI_VENDOR_ID_TEKRAM		0x1de1
 #define PCI_DEVICE_ID_TEKRAM_DC290	0xdc29