cxl: Add AFU virtual PHB and kernel API

This patch does two things.

Firstly it presents the Accelerator Function Unit (AFUs) behind the POWER
Service Layer (PSL) as PCI devices on a virtual PCI Host Bridge (vPHB).  This
in in addition to the PSL being a PCI device itself.

As part of the Coherent Accelerator Interface Architecture (CAIA) AFUs can
provide an AFU configuration.  This AFU configuration recored is architected to
be the same as a PCI config space.

This patch sets discovers the AFU configuration records, provides AFU config
space read/write functions to these configuration records.  It then enumerates
the PCI bus.  It also hooks in PCI ops where appropriate.  It also destroys the
vPHB when the physical card is removed.

Secondly, it add an in kernel API for AFU to use CXL.  AFUs must present a
driver that firstly binds as a PCI device.  This PCI device can then be using
to do CXL specific operations (that can't sit in the PCI ops) using this API.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

1 files changed, 203 insertions, 0 deletions

diff --git a/include/misc/cxl.h b/include/misc/cxl.h
new file mode 100644
index 000000000000..7a6c1d6cc173
--- /dev/null
+++ b/include/misc/cxl.h
@@ -0,0 +1,203 @@
+/*
+ * Copyright 2015 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _MISC_CXL_H
+#define _MISC_CXL_H
+
+#include <linux/pci.h>
+#include <linux/poll.h>
+#include <linux/interrupt.h>
+#include <uapi/misc/cxl.h>
+
+/*
+ * This documents the in kernel API for driver to use CXL. It allows kernel
+ * drivers to bind to AFUs using an AFU configuration record exposed as a PCI
+ * configuration record.
+ *
+ * This API enables control over AFU and contexts which can't be part of the
+ * generic PCI API. This API is agnostic to the actual AFU.
+ */
+
+/* Get the AFU associated with a pci_dev */
+struct cxl_afu *cxl_pci_to_afu(struct pci_dev *dev);
+
+/* Get the AFU conf record number associated with a pci_dev */
+unsigned int cxl_pci_to_cfg_record(struct pci_dev *dev);
+
+/* Get the physical device (ie. the PCIe card) which the AFU is attached */
+struct device *cxl_get_phys_dev(struct pci_dev *dev);
+
+
+/*
+ * Context lifetime overview:
+ *
+ * An AFU context may be inited and then started and stoppped multiple times
+ * before it's released. ie.
+ *    - cxl_dev_context_init()
+ *      - cxl_start_context()
+ *      - cxl_stop_context()
+ *      - cxl_start_context()
+ *      - cxl_stop_context()
+ *     ...repeat...
+ *    - cxl_release_context()
+ * Once released, a context can't be started again.
+ *
+ * One context is inited by the cxl driver for every pci_dev. This is to be
+ * used as a default kernel context. cxl_get_context() will get this
+ * context. This context will be released by PCI hot unplug, so doesn't need to
+ * be released explicitly by drivers.
+ *
+ * Additional kernel contexts may be inited using cxl_dev_context_init().
+ * These must be released using cxl_context_detach().
+ *
+ * Once a context has been inited, IRQs may be configured. Firstly these IRQs
+ * must be allocated (cxl_allocate_afu_irqs()), then individually mapped to
+ * specific handlers (cxl_map_afu_irq()).
+ *
+ * These IRQs can be unmapped (cxl_unmap_afu_irq()) and finally released
+ * (cxl_free_afu_irqs()).
+ *
+ * The AFU can be reset (cxl_afu_reset()). This will cause the PSL/AFU
+ * hardware to lose track of all contexts. It's upto the caller of
+ * cxl_afu_reset() to restart these contexts.
+ */
+
+/*
+ * On pci_enabled_device(), the cxl driver will init a single cxl context for
+ * use by the driver. It doesn't start this context (as that will likely
+ * generate DMA traffic for most AFUs).
+ *
+ * This gets the default context associated with this pci_dev.  This context
+ * doesn't need to be released as this will be done by the PCI subsystem on hot
+ * unplug.
+ */
+struct cxl_context *cxl_get_context(struct pci_dev *dev);
+/*
+ * Allocate and initalise a context associated with a AFU PCI device. This
+ * doesn't start the context in the AFU.
+ */
+struct cxl_context *cxl_dev_context_init(struct pci_dev *dev);
+/*
+ * Release and free a context. Context should be stopped before calling.
+ */
+int cxl_release_context(struct cxl_context *ctx);
+
+/*
+ * Allocate AFU interrupts for this context. num=0 will allocate the default
+ * for this AFU as given in the AFU descriptor. This number doesn't include the
+ * interrupt 0 (CAIA defines AFU IRQ 0 for page faults). Each interrupt to be
+ * used must map a handler with cxl_map_afu_irq.
+ */
+int cxl_allocate_afu_irqs(struct cxl_context *cxl, int num);
+/* Free allocated interrupts */
+void cxl_free_afu_irqs(struct cxl_context *cxl);
+
+/*
+ * Map a handler for an AFU interrupt associated with a particular context. AFU
+ * IRQS numbers start from 1 (CAIA defines AFU IRQ 0 for page faults). cookie
+ * is private data is that will be provided to the interrupt handler.
+ */
+int cxl_map_afu_irq(struct cxl_context *cxl, int num,
+		    irq_handler_t handler, void *cookie, char *name);
+/* unmap mapped IRQ handlers */
+void cxl_unmap_afu_irq(struct cxl_context *cxl, int num, void *cookie);
+
+/*
+ * Start work on the AFU. This starts an cxl context and associates it with a
+ * task. task == NULL will make it a kernel context.
+ */
+int cxl_start_context(struct cxl_context *ctx, u64 wed,
+		      struct task_struct *task);
+/*
+ * Stop a context and remove it from the PSL
+ */
+int cxl_stop_context(struct cxl_context *ctx);
+
+/* Reset the AFU */
+int cxl_afu_reset(struct cxl_context *ctx);
+
+/*
+ * Set a context as a master context.
+ * This sets the default problem space area mapped as the full space, rather
+ * than just the per context area (for slaves).
+ */
+void cxl_set_master(struct cxl_context *ctx);
+
+/*
+ * Map and unmap the AFU Problem Space area. The amount and location mapped
+ * depends on if this context is a master or slave.
+ */
+void __iomem *cxl_psa_map(struct cxl_context *ctx);
+void cxl_psa_unmap(void __iomem *addr);
+
+/*  Get the process element for this context */
+int cxl_process_element(struct cxl_context *ctx);
+
+
+/*
+ * These calls allow drivers to create their own file descriptors and make them
+ * identical to the cxl file descriptor user API. An example use case:
+ *
+ * struct file_operations cxl_my_fops = {};
+ * ......
+ *	// Init the context
+ *	ctx = cxl_dev_context_init(dev);
+ *	if (IS_ERR(ctx))
+ *		return PTR_ERR(ctx);
+ *	// Create and attach a new file descriptor to my file ops
+ *	file = cxl_get_fd(ctx, &cxl_my_fops, &fd);
+ *	// Start context
+ *	rc = cxl_start_work(ctx, &work.work);
+ *	if (rc) {
+ *		fput(file);
+ *		put_unused_fd(fd);
+ *		return -ENODEV;
+ *	}
+ *	// No error paths after installing the fd
+ *	fd_install(fd, file);
+ *	return fd;
+ *
+ * This inits a context, and gets a file descriptor and associates some file
+ * ops to that file descriptor. If the file ops are blank, the cxl driver will
+ * fill them in with the default ones that mimic the standard user API.  Once
+ * completed, the file descriptor can be installed. Once the file descriptor is
+ * installed, it's visible to the user so no errors must occur past this point.
+ *
+ * If cxl_fd_release() file op call is installed, the context will be stopped
+ * and released when the fd is released. Hence the driver won't need to manage
+ * this itself.
+ */
+
+/*
+ * Take a context and associate it with my file ops. Returns the associated
+ * file and file descriptor. Any file ops which are blank are filled in by the
+ * cxl driver with the default ops to mimic the standard API.
+ */
+struct file *cxl_get_fd(struct cxl_context *ctx, struct file_operations *fops,
+			int *fd);
+/* Get the context associated with this file */
+struct cxl_context *cxl_fops_get_context(struct file *file);
+/*
+ * Start a context associated a struct cxl_ioctl_start_work used by the
+ * standard cxl user API.
+ */
+int cxl_start_work(struct cxl_context *ctx,
+		   struct cxl_ioctl_start_work *work);
+/*
+ * Export all the existing fops so drivers can use them
+ */
+int cxl_fd_open(struct inode *inode, struct file *file);
+int cxl_fd_release(struct inode *inode, struct file *file);
+long cxl_fd_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
+int cxl_fd_mmap(struct file *file, struct vm_area_struct *vm);
+unsigned int cxl_fd_poll(struct file *file, struct poll_table_struct *poll);
+ssize_t cxl_fd_read(struct file *file, char __user *buf, size_t count,
+			   loff_t *off);
+
+#endif /* _MISC_CXL_H */