Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1075 commits)
  myri10ge: update driver version number to 1.4.3-1.369
  r8169: add shutdown handler
  r8169: preliminary 8168d support
  r8169: support additional 8168cp chipset
  r8169: change default behavior for mildly identified 8168c chipsets
  r8169: add a new 8168cp flavor
  r8169: add a new 8168c flavor (bis)
  r8169: add a new 8168c flavor
  r8169: sync existing 8168 device hardware start sequences with vendor driver
  r8169: 8168b Tx performance tweak
  r8169: make room for more specific 8168 hardware start procedure
  r8169: shuffle some registers handling around (8168 operation only)
  r8169: new phy init parameters for the 8168b
  r8169: update phy init parameters
  r8169: wake up the PHY of the 8168
  af_key: fix SADB_X_SPDDELETE response
  ath9k: Fix return code when ath9k_hw_setpower() fails on reset
  ath9k: remove nasty FAIL macro from ath9k_hw_reset()
  gre: minor cleanups in netlink interface
  gre: fix copy and paste error
  ...

1 files changed, 185 insertions, 54 deletions

diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index ff137fd7714f..5617a1613c91 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -158,13 +158,17 @@ struct ieee80211_low_level_stats {
  *	also implies a change in the AID.
  * @BSS_CHANGED_ERP_CTS_PROT: CTS protection changed
  * @BSS_CHANGED_ERP_PREAMBLE: preamble changed
+ * @BSS_CHANGED_ERP_SLOT: slot timing changed
  * @BSS_CHANGED_HT: 802.11n parameters changed
+ * @BSS_CHANGED_BASIC_RATES: Basic rateset changed
  */
 enum ieee80211_bss_change {
 	BSS_CHANGED_ASSOC		= 1<<0,
 	BSS_CHANGED_ERP_CTS_PROT	= 1<<1,
 	BSS_CHANGED_ERP_PREAMBLE	= 1<<2,
+	BSS_CHANGED_ERP_SLOT		= 1<<3,
 	BSS_CHANGED_HT                  = 1<<4,
+	BSS_CHANGED_BASIC_RATES		= 1<<5,
 };
 
 /**
@@ -177,6 +181,7 @@ enum ieee80211_bss_change {
  * @aid: association ID number, valid only when @assoc is true
  * @use_cts_prot: use CTS protection
  * @use_short_preamble: use 802.11b short preamble
+ * @use_short_slot: use short slot time (only relevant for ERP)
  * @dtim_period: num of beacons before the next DTIM, for PSM
  * @timestamp: beacon timestamp
  * @beacon_int: beacon interval
@@ -184,6 +189,9 @@ enum ieee80211_bss_change {
  * @assoc_ht: association in HT mode
  * @ht_conf: ht capabilities
  * @ht_bss_conf: ht extended capabilities
+ * @basic_rates: bitmap of basic rates, each bit stands for an
+ *	index into the rate table configured by the driver in
+ *	the current band.
  */
 struct ieee80211_bss_conf {
 	/* association related data */
@@ -192,10 +200,12 @@ struct ieee80211_bss_conf {
 	/* erp related data */
 	bool use_cts_prot;
 	bool use_short_preamble;
+	bool use_short_slot;
 	u8 dtim_period;
 	u16 beacon_int;
 	u16 assoc_capability;
 	u64 timestamp;
+	u64 basic_rates;
 	/* ht related data */
 	bool assoc_ht;
 	struct ieee80211_ht_info *ht_conf;
@@ -282,6 +292,20 @@ enum mac80211_tx_control_flags {
 #define IEEE80211_TX_INFO_DRIVER_DATA_PTRS \
 	(IEEE80211_TX_INFO_DRIVER_DATA_SIZE / sizeof(void *))
 
+/* maximum number of alternate rate retry stages */
+#define IEEE80211_TX_MAX_ALTRATE	3
+
+/**
+ * struct ieee80211_tx_altrate - alternate rate selection/status
+ *
+ * @rate_idx: rate index to attempt to send with
+ * @limit: number of retries before fallback
+ */
+struct ieee80211_tx_altrate {
+	s8 rate_idx;
+	u8 limit;
+};
+
 /**
  * struct ieee80211_tx_info - skb transmit information
  *
@@ -290,6 +314,9 @@ enum mac80211_tx_control_flags {
  *  (2) driver internal use (if applicable)
  *  (3) TX status information - driver tells mac80211 what happened
  *
+ * The TX control's sta pointer is only valid during the ->tx call,
+ * it may be NULL.
+ *
  * @flags: transmit info flags, defined above
  * @band: TBD
  * @tx_rate_idx: TBD
@@ -317,18 +344,19 @@ struct ieee80211_tx_info {
 
 	union {
 		struct {
+			/* NB: vif can be NULL for injected frames */
 			struct ieee80211_vif *vif;
 			struct ieee80211_key_conf *hw_key;
+			struct ieee80211_sta *sta;
 			unsigned long jiffies;
-			u16 aid;
-			s8 rts_cts_rate_idx, alt_retry_rate_idx;
+			s8 rts_cts_rate_idx;
 			u8 retry_limit;
-			u8 icv_len;
-			u8 iv_len;
+			struct ieee80211_tx_altrate retries[IEEE80211_TX_MAX_ALTRATE];
 		} control;
 		struct {
 			u64 ampdu_ack_map;
 			int ack_signal;
+			struct ieee80211_tx_altrate retries[IEEE80211_TX_MAX_ALTRATE + 1];
 			u8 retry_count;
 			bool excessive_retries;
 			u8 ampdu_ack_len;
@@ -363,6 +391,7 @@ static inline struct ieee80211_tx_info *IEEE80211_SKB_CB(struct sk_buff *skb)
  * @RX_FLAG_TSFT: The timestamp passed in the RX status (@mactime field)
  *	is valid. This is useful in monitor mode and necessary for beacon frames
  *	to enable IBSS merging.
+ * @RX_FLAG_SHORTPRE: Short preamble was used for this frame
  */
 enum mac80211_rx_flags {
 	RX_FLAG_MMIC_ERROR	= 1<<0,
@@ -373,6 +402,7 @@ enum mac80211_rx_flags {
 	RX_FLAG_FAILED_FCS_CRC	= 1<<5,
 	RX_FLAG_FAILED_PLCP_CRC = 1<<6,
 	RX_FLAG_TSFT		= 1<<7,
+	RX_FLAG_SHORTPRE	= 1<<8
 };
 
 /**
@@ -418,6 +448,11 @@ struct ieee80211_rx_status {
  * @IEEE80211_CONF_PS: Enable 802.11 power save mode
  */
 enum ieee80211_conf_flags {
+	/*
+	 * TODO: IEEE80211_CONF_SHORT_SLOT_TIME will be removed once drivers
+	 * have been converted to use bss_info_changed() for slot time
+	 * configuration
+	 */
 	IEEE80211_CONF_SHORT_SLOT_TIME	= (1<<0),
 	IEEE80211_CONF_RADIOTAP		= (1<<1),
 	IEEE80211_CONF_SUPPORT_HT_MODE	= (1<<2),
@@ -461,33 +496,6 @@ struct ieee80211_conf {
 };
 
 /**
- * enum ieee80211_if_types - types of 802.11 network interfaces
- *
- * @IEEE80211_IF_TYPE_INVALID: invalid interface type, not used
- *	by mac80211 itself
- * @IEEE80211_IF_TYPE_AP: interface in AP mode.
- * @IEEE80211_IF_TYPE_MGMT: special interface for communication with hostap
- *	daemon. Drivers should never see this type.
- * @IEEE80211_IF_TYPE_STA: interface in STA (client) mode.
- * @IEEE80211_IF_TYPE_IBSS: interface in IBSS (ad-hoc) mode.
- * @IEEE80211_IF_TYPE_MNTR: interface in monitor (rfmon) mode.
- * @IEEE80211_IF_TYPE_WDS: interface in WDS mode.
- * @IEEE80211_IF_TYPE_VLAN: VLAN interface bound to an AP, drivers
- *	will never see this type.
- * @IEEE80211_IF_TYPE_MESH_POINT: 802.11s mesh point
- */
-enum ieee80211_if_types {
-	IEEE80211_IF_TYPE_INVALID,
-	IEEE80211_IF_TYPE_AP,
-	IEEE80211_IF_TYPE_STA,
-	IEEE80211_IF_TYPE_IBSS,
-	IEEE80211_IF_TYPE_MESH_POINT,
-	IEEE80211_IF_TYPE_MNTR,
-	IEEE80211_IF_TYPE_WDS,
-	IEEE80211_IF_TYPE_VLAN,
-};
-
-/**
  * struct ieee80211_vif - per-interface data
  *
  * Data in this structure is continually present for driver
@@ -498,7 +506,7 @@ enum ieee80211_if_types {
  *	sizeof(void *).
  */
 struct ieee80211_vif {
-	enum ieee80211_if_types type;
+	enum nl80211_iftype type;
 	/* must be last */
 	u8 drv_priv[0] __attribute__((__aligned__(sizeof(void *))));
 };
@@ -506,7 +514,7 @@ struct ieee80211_vif {
 static inline bool ieee80211_vif_is_mesh(struct ieee80211_vif *vif)
 {
 #ifdef CONFIG_MAC80211_MESH
-	return vif->type == IEEE80211_IF_TYPE_MESH_POINT;
+	return vif->type == NL80211_IFTYPE_MESH_POINT;
 #endif
 	return false;
 }
@@ -517,7 +525,7 @@ static inline bool ieee80211_vif_is_mesh(struct ieee80211_vif *vif)
  * @vif: pointer to a driver-use per-interface structure. The pointer
  *	itself is also used for various functions including
  *	ieee80211_beacon_get() and ieee80211_get_buffered_bc().
- * @type: one of &enum ieee80211_if_types constants. Determines the type of
+ * @type: one of &enum nl80211_iftype constants. Determines the type of
  *	added/removed interface.
  * @mac_addr: pointer to MAC address of the interface. This pointer is valid
  *	until the interface is removed (i.e. it cannot be used after
@@ -533,7 +541,7 @@ static inline bool ieee80211_vif_is_mesh(struct ieee80211_vif *vif)
  * in pure monitor mode.
  */
 struct ieee80211_if_init_conf {
-	enum ieee80211_if_types type;
+	enum nl80211_iftype type;
 	struct ieee80211_vif *vif;
 	void *mac_addr;
 };
@@ -641,6 +649,8 @@ enum ieee80211_key_flags {
  */
 struct ieee80211_key_conf {
 	enum ieee80211_key_alg alg;
+	u8 icv_len;
+	u8 iv_len;
 	u8 hw_key_idx;
 	u8 flags;
 	s8 keyidx;
@@ -662,6 +672,33 @@ enum set_key_cmd {
 };
 
 /**
+ * struct ieee80211_sta - station table entry
+ *
+ * A station table entry represents a station we are possibly
+ * communicating with. Since stations are RCU-managed in
+ * mac80211, any ieee80211_sta pointer you get access to must
+ * either be protected by rcu_read_lock() explicitly or implicitly,
+ * or you must take good care to not use such a pointer after a
+ * call to your sta_notify callback that removed it.
+ *
+ * @addr: MAC address
+ * @aid: AID we assigned to the station if we're an AP
+ * @supp_rates: Bitmap of supported rates (per band)
+ * @ht_info: HT capabilities of this STA
+ * @drv_priv: data area for driver use, will always be aligned to
+ *	sizeof(void *), size is determined in hw information.
+ */
+struct ieee80211_sta {
+	u64 supp_rates[IEEE80211_NUM_BANDS];
+	u8 addr[ETH_ALEN];
+	u16 aid;
+	struct ieee80211_ht_info ht_info;
+
+	/* must be last */
+	u8 drv_priv[0] __attribute__((__aligned__(sizeof(void *))));
+};
+
+/**
  * enum sta_notify_cmd - sta notify command
  *
  * Used with the sta_notify() callback in &struct ieee80211_ops, this
@@ -805,6 +842,11 @@ enum ieee80211_hw_flags {
  *
  * @vif_data_size: size (in bytes) of the drv_priv data area
  *	within &struct ieee80211_vif.
+ * @sta_data_size: size (in bytes) of the drv_priv data area
+ *	within &struct ieee80211_sta.
+ *
+ * @max_altrates: maximum number of alternate rate retry stages
+ * @max_altrate_tries: maximum number of tries for each stage
  */
 struct ieee80211_hw {
 	struct ieee80211_conf conf;
@@ -816,12 +858,17 @@ struct ieee80211_hw {
 	unsigned int extra_tx_headroom;
 	int channel_change_time;
 	int vif_data_size;
+	int sta_data_size;
 	u16 queues;
 	u16 ampdu_queues;
 	u16 max_listen_interval;
 	s8 max_signal;
+	u8 max_altrates;
+	u8 max_altrate_tries;
 };
 
+struct ieee80211_hw *wiphy_to_hw(struct wiphy *wiphy);
+
 /**
  * SET_IEEE80211_DEV - set device for 802.11 hardware
  *
@@ -874,11 +921,11 @@ ieee80211_get_rts_cts_rate(const struct ieee80211_hw *hw,
 
 static inline struct ieee80211_rate *
 ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw,
-			     const struct ieee80211_tx_info *c)
+			     const struct ieee80211_tx_info *c, int idx)
 {
-	if (c->control.alt_retry_rate_idx < 0)
+	if (c->control.retries[idx].rate_idx < 0)
 		return NULL;
-	return &hw->wiphy->bands[c->band]->bitrates[c->control.alt_retry_rate_idx];
+	return &hw->wiphy->bands[c->band]->bitrates[c->control.retries[idx].rate_idx];
 }
 
 /**
@@ -1097,7 +1144,7 @@ enum ieee80211_ampdu_mlme_action {
  *	This callback must be implemented and atomic.
  *
  * @set_tim: Set TIM bit. mac80211 calls this function when a TIM bit
- * 	must be set or cleared for a given AID. Must be atomic.
+ * 	must be set or cleared for a given STA. Must be atomic.
  *
  * @set_key: See the section "Hardware crypto acceleration"
  *	This callback can sleep, and is only called between add_interface
@@ -1111,7 +1158,9 @@ enum ieee80211_ampdu_mlme_action {
  * @hw_scan: Ask the hardware to service the scan request, no need to start
  *	the scan state machine in stack. The scan must honour the channel
  *	configuration done by the regulatory agent in the wiphy's registered
- *	bands.
+ *	bands. When the scan finishes, ieee80211_scan_completed() must be
+ *	called; note that it also must be called when the scan cannot finish
+ *	because the hardware is turned off! Anything else is a bug!
  *
  * @get_stats: return low-level statistics
  *
@@ -1131,7 +1180,7 @@ enum ieee80211_ampdu_mlme_action {
  *	of assocaited station or AP.
  *
  * @conf_tx: Configure TX queue parameters (EDCF (aifs, cw_min, cw_max),
- *	bursting) for a hardware TX queue. Must be atomic.
+ *	bursting) for a hardware TX queue.
  *
  * @get_tx_stats: Get statistics of the current TX queue status. This is used
  *	to get number of currently queued packets (queue length), maximum queue
@@ -1181,7 +1230,8 @@ struct ieee80211_ops {
 				 unsigned int changed_flags,
 				 unsigned int *total_flags,
 				 int mc_count, struct dev_addr_list *mc_list);
-	int (*set_tim)(struct ieee80211_hw *hw, int aid, int set);
+	int (*set_tim)(struct ieee80211_hw *hw, struct ieee80211_sta *sta,
+		       bool set);
 	int (*set_key)(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 		       const u8 *local_address, const u8 *address,
 		       struct ieee80211_key_conf *key);
@@ -1198,7 +1248,7 @@ struct ieee80211_ops {
 	int (*set_retry_limit)(struct ieee80211_hw *hw,
 			       u32 short_retry, u32 long_retr);
 	void (*sta_notify)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
-			enum sta_notify_cmd, const u8 *addr);
+			enum sta_notify_cmd, struct ieee80211_sta *sta);
 	int (*conf_tx)(struct ieee80211_hw *hw, u16 queue,
 		       const struct ieee80211_tx_queue_params *params);
 	int (*get_tx_stats)(struct ieee80211_hw *hw,
@@ -1208,7 +1258,7 @@ struct ieee80211_ops {
 	int (*tx_last_beacon)(struct ieee80211_hw *hw);
 	int (*ampdu_action)(struct ieee80211_hw *hw,
 			    enum ieee80211_ampdu_mlme_action action,
-			    const u8 *addr, u16 tid, u16 *ssn);
+			    struct ieee80211_sta *sta, u16 tid, u16 *ssn);
 };
 
 /**
@@ -1557,16 +1607,6 @@ ieee80211_get_buffered_bc(struct ieee80211_hw *hw, struct ieee80211_vif *vif);
 unsigned int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb);
 
 /**
- * ieee80211_get_hdrlen - get header length from frame control
- *
- * This function returns the 802.11 header length in bytes (not including
- * encryption headers.)
- *
- * @fc: the frame control field (in CPU endianness)
- */
-int ieee80211_get_hdrlen(u16 fc);
-
-/**
  * ieee80211_hdrlen - get header length in bytes from frame control
  * @fc: frame control field in little-endian format
  */
@@ -1608,6 +1648,16 @@ void ieee80211_wake_queue(struct ieee80211_hw *hw, int queue);
 void ieee80211_stop_queue(struct ieee80211_hw *hw, int queue);
 
 /**
+ * ieee80211_queue_stopped - test status of the queue
+ * @hw: pointer as obtained from ieee80211_alloc_hw().
+ * @queue: queue number (counted from zero).
+ *
+ * Drivers should use this function instead of netif_stop_queue.
+ */
+
+int ieee80211_queue_stopped(struct ieee80211_hw *hw, int queue);
+
+/**
  * ieee80211_stop_queues - stop all queues
  * @hw: pointer as obtained from ieee80211_alloc_hw().
  *
@@ -1758,4 +1808,85 @@ void ieee80211_stop_tx_ba_cb_irqsafe(struct ieee80211_hw *hw, const u8 *ra,
  */
 void ieee80211_notify_mac(struct ieee80211_hw *hw,
 			  enum ieee80211_notification_types  notif_type);
+
+/**
+ * ieee80211_find_sta - find a station
+ *
+ * @hw: pointer as obtained from ieee80211_alloc_hw()
+ * @addr: station's address
+ *
+ * This function must be called under RCU lock and the
+ * resulting pointer is only valid under RCU lock as well.
+ */
+struct ieee80211_sta *ieee80211_find_sta(struct ieee80211_hw *hw,
+					 const u8 *addr);
+
+
+/* Rate control API */
+/**
+ * struct rate_selection - rate information for/from rate control algorithms
+ *
+ * @rate_idx: selected transmission rate index
+ * @nonerp_idx: Non-ERP rate to use instead if ERP cannot be used
+ * @probe_idx: rate for probing (or -1)
+ * @max_rate_idx: maximum rate index that can be used, this is
+ *	input to the algorithm and will be enforced
+ */
+struct rate_selection {
+	s8 rate_idx, nonerp_idx, probe_idx, max_rate_idx;
+};
+
+struct rate_control_ops {
+	struct module *module;
+	const char *name;
+	void *(*alloc)(struct ieee80211_hw *hw, struct dentry *debugfsdir);
+	void (*clear)(void *priv);
+	void (*free)(void *priv);
+
+	void *(*alloc_sta)(void *priv, struct ieee80211_sta *sta, gfp_t gfp);
+	void (*rate_init)(void *priv, struct ieee80211_supported_band *sband,
+			  struct ieee80211_sta *sta, void *priv_sta);
+	void (*free_sta)(void *priv, struct ieee80211_sta *sta,
+			 void *priv_sta);
+
+	void (*tx_status)(void *priv, struct ieee80211_supported_band *sband,
+			  struct ieee80211_sta *sta, void *priv_sta,
+			  struct sk_buff *skb);
+	void (*get_rate)(void *priv, struct ieee80211_supported_band *sband,
+			 struct ieee80211_sta *sta, void *priv_sta,
+			 struct sk_buff *skb,
+			 struct rate_selection *sel);
+
+	void (*add_sta_debugfs)(void *priv, void *priv_sta,
+				struct dentry *dir);
+	void (*remove_sta_debugfs)(void *priv, void *priv_sta);
+};
+
+static inline int rate_supported(struct ieee80211_sta *sta,
+				 enum ieee80211_band band,
+				 int index)
+{
+	return (sta == NULL || sta->supp_rates[band] & BIT(index));
+}
+
+static inline s8
+rate_lowest_index(struct ieee80211_supported_band *sband,
+		  struct ieee80211_sta *sta)
+{
+	int i;
+
+	for (i = 0; i < sband->n_bitrates; i++)
+		if (rate_supported(sta, sband->band, i))
+			return i;
+
+	/* warn when we cannot find a rate. */
+	WARN_ON(1);
+
+	return 0;
+}
+
+
+int ieee80211_rate_control_register(struct rate_control_ops *ops);
+void ieee80211_rate_control_unregister(struct rate_control_ops *ops);
+
 #endif /* MAC80211_H */