Merge mulgrave-w:git/scsi-misc-2.6

Conflicts:

	drivers/scsi/iscsi_tcp.c
	drivers/scsi/iscsi_tcp.h

Pretty horrible merge between crypto hash consolidation
and crypto_digest_...->crypto_hash_... conversion

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

11 files changed, 1543 insertions, 48 deletions

diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h
index 41904f611d12..401192e56e50 100644
--- a/include/scsi/libiscsi.h
+++ b/include/scsi/libiscsi.h
@@ -102,6 +102,8 @@ struct iscsi_cmd_task {
 	uint32_t		unsol_datasn;
 	int			imm_count;	/* imm-data (bytes)   */
 	int			unsol_count;	/* unsolicited (bytes)*/
+	/* offset in unsolicited stream (bytes); */
+	int			unsol_offset;
 	int			data_count;	/* remaining Data-Out */
 	struct scsi_cmnd	*sc;		/* associated SCSI cmd*/
 	int			total_length;
@@ -110,6 +112,7 @@ struct iscsi_cmd_task {
 
 	/* state set/tested under session->lock */
 	int			state;
+	atomic_t		refcount;
 	struct list_head	running;	/* running cmd list */
 	void			*dd_data;	/* driver/transport data */
 };
@@ -290,8 +293,7 @@ extern int iscsi_conn_get_param(struct iscsi_cls_conn *cls_conn,
 extern int iscsi_check_assign_cmdsn(struct iscsi_session *,
 				    struct iscsi_nopin *);
 extern void iscsi_prep_unsolicit_data_pdu(struct iscsi_cmd_task *,
-					struct iscsi_data *hdr,
-					int transport_data_cnt);
+					struct iscsi_data *hdr);
 extern int iscsi_conn_send_pdu(struct iscsi_cls_conn *, struct iscsi_hdr *,
 				char *, uint32_t);
 extern int iscsi_complete_pdu(struct iscsi_conn *, struct iscsi_hdr *,
diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h
new file mode 100644
index 000000000000..8e39982fc3db
--- /dev/null
+++ b/include/scsi/libsas.h
@@ -0,0 +1,627 @@
+/*
+ * SAS host prototypes and structures header file
+ *
+ * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ *
+ */
+
+#ifndef _LIBSAS_H_
+#define _LIBSAS_H_
+
+
+#include <linux/timer.h>
+#include <linux/pci.h>
+#include <scsi/sas.h>
+#include <linux/list.h>
+#include <asm/semaphore.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_transport_sas.h>
+
+struct block_device;
+
+enum sas_class {
+	SAS,
+	EXPANDER
+};
+
+enum sas_phy_role {
+	PHY_ROLE_NONE = 0,
+	PHY_ROLE_TARGET = 0x40,
+	PHY_ROLE_INITIATOR = 0x80,
+};
+
+enum sas_phy_type {
+        PHY_TYPE_PHYSICAL,
+        PHY_TYPE_VIRTUAL
+};
+
+/* The events are mnemonically described in sas_dump.c
+ * so when updating/adding events here, please also
+ * update the other file too.
+ */
+enum ha_event {
+	HAE_RESET             = 0U,
+	HA_NUM_EVENTS         = 1,
+};
+
+enum port_event {
+	PORTE_BYTES_DMAED     = 0U,
+	PORTE_BROADCAST_RCVD  = 1,
+	PORTE_LINK_RESET_ERR  = 2,
+	PORTE_TIMER_EVENT     = 3,
+	PORTE_HARD_RESET      = 4,
+	PORT_NUM_EVENTS       = 5,
+};
+
+enum phy_event {
+	PHYE_LOSS_OF_SIGNAL   = 0U,
+	PHYE_OOB_DONE         = 1,
+	PHYE_OOB_ERROR        = 2,
+	PHYE_SPINUP_HOLD      = 3, /* hot plug SATA, no COMWAKE sent */
+	PHY_NUM_EVENTS        = 4,
+};
+
+enum discover_event {
+	DISCE_DISCOVER_DOMAIN   = 0U,
+	DISCE_REVALIDATE_DOMAIN = 1,
+	DISCE_PORT_GONE         = 2,
+	DISC_NUM_EVENTS 	= 3,
+};
+
+/* ---------- Expander Devices ---------- */
+
+#define ETASK 0xFA
+
+#define to_dom_device(_obj) container_of(_obj, struct domain_device, dev_obj)
+#define to_dev_attr(_attr)  container_of(_attr, struct domain_dev_attribute,\
+                                         attr)
+
+enum routing_attribute {
+	DIRECT_ROUTING,
+	SUBTRACTIVE_ROUTING,
+	TABLE_ROUTING,
+};
+
+enum ex_phy_state {
+	PHY_EMPTY,
+	PHY_VACANT,
+	PHY_NOT_PRESENT,
+	PHY_DEVICE_DISCOVERED
+};
+
+struct ex_phy {
+	int    phy_id;
+
+	enum ex_phy_state phy_state;
+
+	enum sas_dev_type attached_dev_type;
+	enum sas_linkrate linkrate;
+
+	u8   attached_sata_host:1;
+	u8   attached_sata_dev:1;
+	u8   attached_sata_ps:1;
+
+	enum sas_proto attached_tproto;
+	enum sas_proto attached_iproto;
+
+	u8   attached_sas_addr[SAS_ADDR_SIZE];
+	u8   attached_phy_id;
+
+	u8   phy_change_count;
+	enum routing_attribute routing_attr;
+	u8   virtual:1;
+
+	int  last_da_index;
+
+	struct sas_phy *phy;
+	struct sas_port *port;
+};
+
+struct expander_device {
+	struct list_head children;
+
+	u16    ex_change_count;
+	u16    max_route_indexes;
+	u8     num_phys;
+	u8     configuring:1;
+	u8     conf_route_table:1;
+	u8     enclosure_logical_id[8];
+
+	struct ex_phy *ex_phy;
+	struct sas_port *parent_port;
+};
+
+/* ---------- SATA device ---------- */
+enum ata_command_set {
+        ATA_COMMAND_SET   = 0,
+        ATAPI_COMMAND_SET = 1,
+};
+
+struct sata_device {
+        enum   ata_command_set command_set;
+        struct smp_resp        rps_resp; /* report_phy_sata_resp */
+        __le16 *identify_device;
+        __le16 *identify_packet_device;
+
+        u8     port_no;        /* port number, if this is a PM (Port) */
+        struct list_head children; /* PM Ports if this is a PM */
+};
+
+/* ---------- Domain device ---------- */
+struct domain_device {
+        enum sas_dev_type dev_type;
+
+        enum sas_linkrate linkrate;
+        enum sas_linkrate min_linkrate;
+        enum sas_linkrate max_linkrate;
+
+        int  pathways;
+
+        struct domain_device *parent;
+        struct list_head siblings; /* devices on the same level */
+        struct asd_sas_port *port;        /* shortcut to root of the tree */
+
+        struct list_head dev_list_node;
+
+        enum sas_proto    iproto;
+        enum sas_proto    tproto;
+
+        struct sas_rphy *rphy;
+
+        u8  sas_addr[SAS_ADDR_SIZE];
+        u8  hashed_sas_addr[HASHED_SAS_ADDR_SIZE];
+
+        u8  frame_rcvd[32];
+
+        union {
+                struct expander_device ex_dev;
+                struct sata_device     sata_dev; /* STP & directly attached */
+        };
+
+        void *lldd_dev;
+};
+
+struct sas_discovery {
+	spinlock_t disc_event_lock;
+	struct work_struct disc_work[DISC_NUM_EVENTS];
+	unsigned long    pending;
+	u8     fanout_sas_addr[8];
+	u8     eeds_a[8];
+	u8     eeds_b[8];
+	int    max_level;
+};
+
+
+/* The port struct is Class:RW, driver:RO */
+struct asd_sas_port {
+/* private: */
+	struct completion port_gone_completion;
+
+	struct sas_discovery disc;
+	struct domain_device *port_dev;
+	spinlock_t dev_list_lock;
+	struct list_head dev_list;
+	enum   sas_linkrate linkrate;
+
+	struct sas_phy *phy;
+	struct work_struct work;
+
+/* public: */
+	int id;
+
+	enum sas_class   class;
+	u8               sas_addr[SAS_ADDR_SIZE];
+	u8               attached_sas_addr[SAS_ADDR_SIZE];
+	enum sas_proto   iproto;
+	enum sas_proto   tproto;
+
+	enum sas_oob_mode oob_mode;
+
+	spinlock_t       phy_list_lock;
+	struct list_head phy_list;
+	int              num_phys;
+	u32              phy_mask;
+
+	struct sas_ha_struct *ha;
+
+	struct sas_port	*port;
+
+	void *lldd_port;	  /* not touched by the sas class code */
+};
+
+/* The phy pretty much is controlled by the LLDD.
+ * The class only reads those fields.
+ */
+struct asd_sas_phy {
+/* private: */
+	/* protected by ha->event_lock */
+	struct work_struct   port_events[PORT_NUM_EVENTS];
+	struct work_struct   phy_events[PHY_NUM_EVENTS];
+
+	unsigned long port_events_pending;
+	unsigned long phy_events_pending;
+
+	int error;
+
+	struct sas_phy *phy;
+
+/* public: */
+	/* The following are class:RO, driver:R/W */
+	int            enabled;	  /* must be set */
+
+	int            id;	  /* must be set */
+	enum sas_class class;
+	enum sas_proto iproto;
+	enum sas_proto tproto;
+
+	enum sas_phy_type  type;
+	enum sas_phy_role  role;
+	enum sas_oob_mode  oob_mode;
+	enum sas_linkrate linkrate;
+
+	u8   *sas_addr;		  /* must be set */
+	u8   attached_sas_addr[SAS_ADDR_SIZE]; /* class:RO, driver: R/W */
+
+	spinlock_t     frame_rcvd_lock;
+	u8             *frame_rcvd; /* must be set */
+	int            frame_rcvd_size;
+
+	spinlock_t     sas_prim_lock;
+	u32            sas_prim;
+
+	struct list_head port_phy_el; /* driver:RO */
+	struct asd_sas_port      *port; /* Class:RW, driver: RO */
+
+	struct sas_ha_struct *ha; /* may be set; the class sets it anyway */
+
+	void *lldd_phy;		  /* not touched by the sas_class_code */
+};
+
+struct scsi_core {
+	struct Scsi_Host *shost;
+
+	spinlock_t        task_queue_lock;
+	struct list_head  task_queue;
+	int               task_queue_size;
+
+	struct semaphore  queue_thread_sema;
+	int               queue_thread_kill;
+};
+
+struct sas_ha_struct {
+/* private: */
+	spinlock_t       event_lock;
+	struct work_struct ha_events[HA_NUM_EVENTS];
+	unsigned long	 pending;
+
+	struct scsi_core core;
+
+/* public: */
+	char *sas_ha_name;
+	struct pci_dev *pcidev;	  /* should be set */
+	struct module *lldd_module; /* should be set */
+
+	u8 *sas_addr;		  /* must be set */
+	u8 hashed_sas_addr[HASHED_SAS_ADDR_SIZE];
+
+	spinlock_t      phy_port_lock;
+	struct asd_sas_phy  **sas_phy; /* array of valid pointers, must be set */
+	struct asd_sas_port **sas_port; /* array of valid pointers, must be set */
+	int             num_phys; /* must be set, gt 0, static */
+
+	/* The class calls this to send a task for execution. */
+	int lldd_max_execute_num;
+	int lldd_queue_size;
+
+	/* LLDD calls these to notify the class of an event. */
+	void (*notify_ha_event)(struct sas_ha_struct *, enum ha_event);
+	void (*notify_port_event)(struct asd_sas_phy *, enum port_event);
+	void (*notify_phy_event)(struct asd_sas_phy *, enum phy_event);
+
+	void *lldd_ha;		  /* not touched by sas class code */
+};
+
+#define SHOST_TO_SAS_HA(_shost) (*(struct sas_ha_struct **)(_shost)->hostdata)
+
+static inline struct domain_device *
+starget_to_domain_dev(struct scsi_target *starget) {
+	return starget->hostdata;
+}
+
+static inline struct domain_device *
+sdev_to_domain_dev(struct scsi_device *sdev) {
+	return starget_to_domain_dev(sdev->sdev_target);
+}
+
+static inline struct domain_device *
+cmd_to_domain_dev(struct scsi_cmnd *cmd)
+{
+	return sdev_to_domain_dev(cmd->device);
+}
+
+void sas_hash_addr(u8 *hashed, const u8 *sas_addr);
+
+/* Before calling a notify event, LLDD should use this function
+ * when the link is severed (possibly from its tasklet).
+ * The idea is that the Class only reads those, while the LLDD,
+ * can R/W these (thus avoiding a race).
+ */
+static inline void sas_phy_disconnected(struct asd_sas_phy *phy)
+{
+	phy->oob_mode = OOB_NOT_CONNECTED;
+	phy->linkrate = SAS_LINK_RATE_UNKNOWN;
+}
+
+/* ---------- Tasks ---------- */
+/*
+      service_response |  SAS_TASK_COMPLETE  |  SAS_TASK_UNDELIVERED |
+  exec_status          |                     |                       |
+  ---------------------+---------------------+-----------------------+
+       SAM_...         |         X           |                       |
+       DEV_NO_RESPONSE |         X           |           X           |
+       INTERRUPTED     |         X           |                       |
+       QUEUE_FULL      |                     |           X           |
+       DEVICE_UNKNOWN  |                     |           X           |
+       SG_ERR          |                     |           X           |
+  ---------------------+---------------------+-----------------------+
+ */
+
+enum service_response {
+	SAS_TASK_COMPLETE,
+	SAS_TASK_UNDELIVERED = -1,
+};
+
+enum exec_status {
+	SAM_GOOD         = 0,
+	SAM_CHECK_COND   = 2,
+	SAM_COND_MET     = 4,
+	SAM_BUSY         = 8,
+	SAM_INTERMEDIATE = 0x10,
+	SAM_IM_COND_MET  = 0x12,
+	SAM_RESV_CONFLICT= 0x14,
+	SAM_TASK_SET_FULL= 0x28,
+	SAM_ACA_ACTIVE   = 0x30,
+	SAM_TASK_ABORTED = 0x40,
+
+	SAS_DEV_NO_RESPONSE = 0x80,
+	SAS_DATA_UNDERRUN,
+	SAS_DATA_OVERRUN,
+	SAS_INTERRUPTED,
+	SAS_QUEUE_FULL,
+	SAS_DEVICE_UNKNOWN,
+	SAS_SG_ERR,
+	SAS_OPEN_REJECT,
+	SAS_OPEN_TO,
+	SAS_PROTO_RESPONSE,
+	SAS_PHY_DOWN,
+	SAS_NAK_R_ERR,
+	SAS_PENDING,
+	SAS_ABORTED_TASK,
+};
+
+/* When a task finishes with a response, the LLDD examines the
+ * response:
+ * 	- For an ATA task task_status_struct::stat is set to
+ * SAS_PROTO_RESPONSE, and the task_status_struct::buf is set to the
+ * contents of struct ata_task_resp.
+ * 	- For SSP tasks, if no data is present or status/TMF response
+ * is valid, task_status_struct::stat is set.  If data is present
+ * (SENSE data), the LLDD copies up to SAS_STATUS_BUF_SIZE, sets
+ * task_status_struct::buf_valid_size, and task_status_struct::stat is
+ * set to SAM_CHECK_COND.
+ *
+ * "buf" has format SCSI Sense for SSP task, or struct ata_task_resp
+ * for ATA task.
+ *
+ * "frame_len" is the total frame length, which could be more or less
+ * than actually copied.
+ *
+ * Tasks ending with response, always set the residual field.
+ */
+struct ata_task_resp {
+	u16  frame_len;
+	u8   ending_fis[24];	  /* dev to host or data-in */
+	u32  sstatus;
+	u32  serror;
+	u32  scontrol;
+	u32  sactive;
+};
+
+#define SAS_STATUS_BUF_SIZE 96
+
+struct task_status_struct {
+	enum service_response resp;
+	enum exec_status      stat;
+	int  buf_valid_size;
+
+	u8   buf[SAS_STATUS_BUF_SIZE];
+
+	u32  residual;
+	enum sas_open_rej_reason open_rej_reason;
+};
+
+/* ATA and ATAPI task queuable to a SAS LLDD.
+ */
+struct sas_ata_task {
+	struct host_to_dev_fis fis;
+	u8     atapi_packet[16];  /* 0 if not ATAPI task */
+
+	u8     retry_count;	  /* hardware retry, should be > 0 */
+
+	u8     dma_xfer:1;	  /* PIO:0 or DMA:1 */
+	u8     use_ncq:1;
+	u8     set_affil_pol:1;
+	u8     stp_affil_pol:1;
+
+	u8     device_control_reg_update:1;
+};
+
+struct sas_smp_task {
+	struct scatterlist smp_req;
+	struct scatterlist smp_resp;
+};
+
+enum task_attribute {
+	TASK_ATTR_SIMPLE = 0,
+	TASK_ATTR_HOQ    = 1,
+	TASK_ATTR_ORDERED= 2,
+	TASK_ATTR_ACA    = 4,
+};
+
+struct sas_ssp_task {
+	u8     retry_count;	  /* hardware retry, should be > 0 */
+
+	u8     LUN[8];
+	u8     enable_first_burst:1;
+	enum   task_attribute task_attr;
+	u8     task_prio;
+	u8     cdb[16];
+};
+
+struct sas_task {
+	struct domain_device *dev;
+	struct list_head      list;
+
+	spinlock_t   task_state_lock;
+	unsigned     task_state_flags;
+
+	enum   sas_proto      task_proto;
+
+	/* Used by the discovery code. */
+	struct timer_list     timer;
+	struct completion     completion;
+
+	union {
+		struct sas_ata_task ata_task;
+		struct sas_smp_task smp_task;
+		struct sas_ssp_task ssp_task;
+	};
+
+	struct scatterlist *scatter;
+	int    num_scatter;
+	u32    total_xfer_len;
+	u8     data_dir:2;	  /* Use PCI_DMA_... */
+
+	struct task_status_struct task_status;
+	void   (*task_done)(struct sas_task *);
+
+	void   *lldd_task;	  /* for use by LLDDs */
+	void   *uldd_task;
+};
+
+
+
+#define SAS_TASK_STATE_PENDING  1
+#define SAS_TASK_STATE_DONE     2
+#define SAS_TASK_STATE_ABORTED  4
+
+static inline struct sas_task *sas_alloc_task(unsigned long flags)
+{
+	extern kmem_cache_t *sas_task_cache;
+	struct sas_task *task = kmem_cache_alloc(sas_task_cache, flags);
+
+	if (task) {
+		memset(task, 0, sizeof(*task));
+		INIT_LIST_HEAD(&task->list);
+		spin_lock_init(&task->task_state_lock);
+		task->task_state_flags = SAS_TASK_STATE_PENDING;
+		init_timer(&task->timer);
+		init_completion(&task->completion);
+	}
+
+	return task;
+}
+
+static inline void sas_free_task(struct sas_task *task)
+{
+	if (task) {
+		extern kmem_cache_t *sas_task_cache;
+		BUG_ON(!list_empty(&task->list));
+		kmem_cache_free(sas_task_cache, task);
+	}
+}
+
+struct sas_domain_function_template {
+	/* The class calls these to notify the LLDD of an event. */
+	void (*lldd_port_formed)(struct asd_sas_phy *);
+	void (*lldd_port_deformed)(struct asd_sas_phy *);
+
+	/* The class calls these when a device is found or gone. */
+	int  (*lldd_dev_found)(struct domain_device *);
+	void (*lldd_dev_gone)(struct domain_device *);
+
+	int (*lldd_execute_task)(struct sas_task *, int num,
+				 unsigned long gfp_flags);
+
+	/* Task Management Functions. Must be called from process context. */
+	int (*lldd_abort_task)(struct sas_task *);
+	int (*lldd_abort_task_set)(struct domain_device *, u8 *lun);
+	int (*lldd_clear_aca)(struct domain_device *, u8 *lun);
+	int (*lldd_clear_task_set)(struct domain_device *, u8 *lun);
+	int (*lldd_I_T_nexus_reset)(struct domain_device *);
+	int (*lldd_lu_reset)(struct domain_device *, u8 *lun);
+	int (*lldd_query_task)(struct sas_task *);
+
+	/* Port and Adapter management */
+	int (*lldd_clear_nexus_port)(struct asd_sas_port *);
+	int (*lldd_clear_nexus_ha)(struct sas_ha_struct *);
+
+	/* Phy management */
+	int (*lldd_control_phy)(struct asd_sas_phy *, enum phy_func, void *);
+};
+
+extern int sas_register_ha(struct sas_ha_struct *);
+extern int sas_unregister_ha(struct sas_ha_struct *);
+
+extern int sas_queuecommand(struct scsi_cmnd *,
+		     void (*scsi_done)(struct scsi_cmnd *));
+extern int sas_target_alloc(struct scsi_target *);
+extern int sas_slave_alloc(struct scsi_device *);
+extern int sas_slave_configure(struct scsi_device *);
+extern void sas_slave_destroy(struct scsi_device *);
+extern int sas_change_queue_depth(struct scsi_device *, int new_depth);
+extern int sas_change_queue_type(struct scsi_device *, int qt);
+extern int sas_bios_param(struct scsi_device *,
+			  struct block_device *,
+			  sector_t capacity, int *hsc);
+extern struct scsi_transport_template *
+sas_domain_attach_transport(struct sas_domain_function_template *);
+extern void sas_domain_release_transport(struct scsi_transport_template *);
+
+int  sas_discover_root_expander(struct domain_device *);
+
+void sas_init_ex_attr(void);
+
+int  sas_ex_revalidate_domain(struct domain_device *);
+
+void sas_unregister_domain_devices(struct asd_sas_port *port);
+void sas_init_disc(struct sas_discovery *disc, struct asd_sas_port *);
+int  sas_discover_event(struct asd_sas_port *, enum discover_event ev);
+
+int  sas_discover_sata(struct domain_device *);
+int  sas_discover_end_dev(struct domain_device *);
+
+void sas_unregister_dev(struct domain_device *);
+
+void sas_init_dev(struct domain_device *);
+
+#endif /* _SASLIB_H_ */
diff --git a/include/scsi/sas.h b/include/scsi/sas.h
new file mode 100644
index 000000000000..2f4b6afa34fc
--- /dev/null
+++ b/include/scsi/sas.h
@@ -0,0 +1,631 @@
+/*
+ * SAS structures and definitions header file
+ *
+ * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ *
+ */
+
+#ifndef _SAS_H_
+#define _SAS_H_
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+#define SAS_ADDR_SIZE        8
+#define HASHED_SAS_ADDR_SIZE 3
+#define SAS_ADDR(_sa) ((unsigned long long) be64_to_cpu(*(__be64 *)(_sa)))
+
+#define SMP_REQUEST             0x40
+#define SMP_RESPONSE            0x41
+
+#define SSP_DATA                0x01
+#define SSP_XFER_RDY            0x05
+#define SSP_COMMAND             0x06
+#define SSP_RESPONSE            0x07
+#define SSP_TASK                0x16
+
+#define SMP_REPORT_GENERAL       0x00
+#define SMP_REPORT_MANUF_INFO    0x01
+#define SMP_READ_GPIO_REG        0x02
+#define SMP_DISCOVER             0x10
+#define SMP_REPORT_PHY_ERR_LOG   0x11
+#define SMP_REPORT_PHY_SATA      0x12
+#define SMP_REPORT_ROUTE_INFO    0x13
+#define SMP_WRITE_GPIO_REG       0x82
+#define SMP_CONF_ROUTE_INFO      0x90
+#define SMP_PHY_CONTROL          0x91
+#define SMP_PHY_TEST_FUNCTION    0x92
+
+#define SMP_RESP_FUNC_ACC        0x00
+#define SMP_RESP_FUNC_UNK        0x01
+#define SMP_RESP_FUNC_FAILED     0x02
+#define SMP_RESP_INV_FRM_LEN     0x03
+#define SMP_RESP_NO_PHY          0x10
+#define SMP_RESP_NO_INDEX        0x11
+#define SMP_RESP_PHY_NO_SATA     0x12
+#define SMP_RESP_PHY_UNK_OP      0x13
+#define SMP_RESP_PHY_UNK_TESTF   0x14
+#define SMP_RESP_PHY_TEST_INPROG 0x15
+#define SMP_RESP_PHY_VACANT      0x16
+
+/* SAM TMFs */
+#define TMF_ABORT_TASK      0x01
+#define TMF_ABORT_TASK_SET  0x02
+#define TMF_CLEAR_TASK_SET  0x04
+#define TMF_LU_RESET        0x08
+#define TMF_CLEAR_ACA       0x40
+#define TMF_QUERY_TASK      0x80
+
+/* SAS TMF responses */
+#define TMF_RESP_FUNC_COMPLETE   0x00
+#define TMF_RESP_INVALID_FRAME   0x02
+#define TMF_RESP_FUNC_ESUPP      0x04
+#define TMF_RESP_FUNC_FAILED     0x05
+#define TMF_RESP_FUNC_SUCC       0x08
+#define TMF_RESP_NO_LUN          0x09
+#define TMF_RESP_OVERLAPPED_TAG  0x0A
+
+enum sas_oob_mode {
+	OOB_NOT_CONNECTED,
+	SATA_OOB_MODE,
+	SAS_OOB_MODE
+};
+
+/* See sas_discover.c if you plan on changing these.
+ */
+enum sas_dev_type {
+	NO_DEVICE   = 0,	  /* protocol */
+	SAS_END_DEV = 1,	  /* protocol */
+	EDGE_DEV    = 2,	  /* protocol */
+	FANOUT_DEV  = 3,	  /* protocol */
+	SAS_HA      = 4,
+	SATA_DEV    = 5,
+	SATA_PM     = 7,
+	SATA_PM_PORT= 8,
+};
+
+/* Partly from IDENTIFY address frame. */
+enum sas_proto {
+	SATA_PROTO    = 1,
+	SAS_PROTO_SMP = 2,	  /* protocol */
+	SAS_PROTO_STP = 4,	  /* protocol */
+	SAS_PROTO_SSP = 8,	  /* protocol */
+	SAS_PROTO_ALL = 0xE,
+};
+
+/* From the spec; local phys only */
+enum phy_func {
+	PHY_FUNC_NOP,
+	PHY_FUNC_LINK_RESET,		  /* Enables the phy */
+	PHY_FUNC_HARD_RESET,
+	PHY_FUNC_DISABLE,
+	PHY_FUNC_CLEAR_ERROR_LOG = 5,
+	PHY_FUNC_CLEAR_AFFIL,
+	PHY_FUNC_TX_SATA_PS_SIGNAL,
+	PHY_FUNC_RELEASE_SPINUP_HOLD = 0x10, /* LOCAL PORT ONLY! */
+	PHY_FUNC_SET_LINK_RATE,
+};
+
+/* SAS LLDD would need to report only _very_few_ of those, like BROADCAST.
+ * Most of those are here for completeness.
+ */
+enum sas_prim {
+	SAS_PRIM_AIP_NORMAL = 1,
+	SAS_PRIM_AIP_R0     = 2,
+	SAS_PRIM_AIP_R1     = 3,
+	SAS_PRIM_AIP_R2     = 4,
+	SAS_PRIM_AIP_WC     = 5,
+	SAS_PRIM_AIP_WD     = 6,
+	SAS_PRIM_AIP_WP     = 7,
+	SAS_PRIM_AIP_RWP    = 8,
+
+	SAS_PRIM_BC_CH      = 9,
+	SAS_PRIM_BC_RCH0    = 10,
+	SAS_PRIM_BC_RCH1    = 11,
+	SAS_PRIM_BC_R0      = 12,
+	SAS_PRIM_BC_R1      = 13,
+	SAS_PRIM_BC_R2      = 14,
+	SAS_PRIM_BC_R3      = 15,
+	SAS_PRIM_BC_R4      = 16,
+
+	SAS_PRIM_NOTIFY_ENSP= 17,
+	SAS_PRIM_NOTIFY_R0  = 18,
+	SAS_PRIM_NOTIFY_R1  = 19,
+	SAS_PRIM_NOTIFY_R2  = 20,
+
+	SAS_PRIM_CLOSE_CLAF = 21,
+	SAS_PRIM_CLOSE_NORM = 22,
+	SAS_PRIM_CLOSE_R0   = 23,
+	SAS_PRIM_CLOSE_R1   = 24,
+
+	SAS_PRIM_OPEN_RTRY  = 25,
+	SAS_PRIM_OPEN_RJCT  = 26,
+	SAS_PRIM_OPEN_ACPT  = 27,
+
+	SAS_PRIM_DONE       = 28,
+	SAS_PRIM_BREAK      = 29,
+
+	SATA_PRIM_DMAT      = 33,
+	SATA_PRIM_PMNAK     = 34,
+	SATA_PRIM_PMACK     = 35,
+	SATA_PRIM_PMREQ_S   = 36,
+	SATA_PRIM_PMREQ_P   = 37,
+	SATA_SATA_R_ERR     = 38,
+};
+
+enum sas_open_rej_reason {
+	/* Abandon open */
+	SAS_OREJ_UNKNOWN   = 0,
+	SAS_OREJ_BAD_DEST  = 1,
+	SAS_OREJ_CONN_RATE = 2,
+	SAS_OREJ_EPROTO    = 3,
+	SAS_OREJ_RESV_AB0  = 4,
+	SAS_OREJ_RESV_AB1  = 5,
+	SAS_OREJ_RESV_AB2  = 6,
+	SAS_OREJ_RESV_AB3  = 7,
+	SAS_OREJ_WRONG_DEST= 8,
+	SAS_OREJ_STP_NORES = 9,
+
+	/* Retry open */
+	SAS_OREJ_NO_DEST   = 10,
+	SAS_OREJ_PATH_BLOCKED = 11,
+	SAS_OREJ_RSVD_CONT0 = 12,
+	SAS_OREJ_RSVD_CONT1 = 13,
+	SAS_OREJ_RSVD_INIT0 = 14,
+	SAS_OREJ_RSVD_INIT1 = 15,
+	SAS_OREJ_RSVD_STOP0 = 16,
+	SAS_OREJ_RSVD_STOP1 = 17,
+	SAS_OREJ_RSVD_RETRY = 18,
+};
+
+struct  dev_to_host_fis {
+	u8     fis_type;	  /* 0x34 */
+	u8     flags;
+	u8     status;
+	u8     error;
+
+	u8     lbal;
+	union { u8 lbam; u8 byte_count_low; };
+	union { u8 lbah; u8 byte_count_high; };
+	u8     device;
+
+	u8     lbal_exp;
+	u8     lbam_exp;
+	u8     lbah_exp;
+	u8     _r_a;
+
+	union { u8  sector_count; u8 interrupt_reason; };
+	u8     sector_count_exp;
+	u8     _r_b;
+	u8     _r_c;
+
+	u32    _r_d;
+} __attribute__ ((packed));
+
+struct host_to_dev_fis {
+	u8     fis_type;	  /* 0x27 */
+	u8     flags;
+	u8     command;
+	u8     features;
+
+	u8     lbal;
+	union { u8 lbam; u8 byte_count_low; };
+	union { u8 lbah; u8 byte_count_high; };
+	u8     device;
+
+	u8     lbal_exp;
+	u8     lbam_exp;
+	u8     lbah_exp;
+	u8     features_exp;
+
+	union { u8  sector_count; u8 interrupt_reason; };
+	u8     sector_count_exp;
+	u8     _r_a;
+	u8     control;
+
+	u32    _r_b;
+} __attribute__ ((packed));
+
+/* Prefer to have code clarity over header file clarity.
+ */
+#ifdef __LITTLE_ENDIAN_BITFIELD
+struct sas_identify_frame {
+	/* Byte 0 */
+	u8  frame_type:4;
+	u8  dev_type:3;
+	u8  _un0:1;
+
+	/* Byte 1 */
+	u8  _un1;
+
+	/* Byte 2 */
+	union {
+		struct {
+			u8  _un20:1;
+			u8  smp_iport:1;
+			u8  stp_iport:1;
+			u8  ssp_iport:1;
+			u8  _un247:4;
+		};
+		u8 initiator_bits;
+	};
+
+	/* Byte 3 */
+	union {
+		struct {
+			u8  _un30:1;
+			u8 smp_tport:1;
+			u8 stp_tport:1;
+			u8 ssp_tport:1;
+			u8 _un347:4;
+		};
+		u8 target_bits;
+	};
+
+	/* Byte 4 - 11 */
+	u8 _un4_11[8];
+
+	/* Byte 12 - 19 */
+	u8 sas_addr[SAS_ADDR_SIZE];
+
+	/* Byte 20 */
+	u8 phy_id;
+
+	u8 _un21_27[7];
+
+	__be32 crc;
+} __attribute__ ((packed));
+
+struct ssp_frame_hdr {
+	u8     frame_type;
+	u8     hashed_dest_addr[HASHED_SAS_ADDR_SIZE];
+	u8     _r_a;
+	u8     hashed_src_addr[HASHED_SAS_ADDR_SIZE];
+	__be16 _r_b;
+
+	u8     changing_data_ptr:1;
+	u8     retransmit:1;
+	u8     retry_data_frames:1;
+	u8     _r_c:5;
+
+	u8     num_fill_bytes:2;
+	u8     _r_d:6;
+
+	u32    _r_e;
+	__be16 tag;
+	__be16 tptt;
+	__be32 data_offs;
+} __attribute__ ((packed));
+
+struct ssp_response_iu {
+	u8     _r_a[10];
+
+	u8     datapres:2;
+	u8     _r_b:6;
+
+	u8     status;
+
+	u32    _r_c;
+
+	__be32 sense_data_len;
+	__be32 response_data_len;
+
+	u8     resp_data[0];
+	u8     sense_data[0];
+} __attribute__ ((packed));
+
+/* ---------- SMP ---------- */
+
+struct report_general_resp {
+	__be16  change_count;
+	__be16  route_indexes;
+	u8      _r_a;
+	u8      num_phys;
+
+	u8      conf_route_table:1;
+	u8      configuring:1;
+	u8      _r_b:6;
+
+	u8      _r_c;
+
+	u8      enclosure_logical_id[8];
+
+	u8      _r_d[12];
+} __attribute__ ((packed));
+
+struct discover_resp {
+	u8    _r_a[5];
+
+	u8    phy_id;
+	__be16 _r_b;
+
+	u8    _r_c:4;
+	u8    attached_dev_type:3;
+	u8    _r_d:1;
+
+	u8    linkrate:4;
+	u8    _r_e:4;
+
+	u8    attached_sata_host:1;
+	u8    iproto:3;
+	u8    _r_f:4;
+
+	u8    attached_sata_dev:1;
+	u8    tproto:3;
+	u8    _r_g:3;
+	u8    attached_sata_ps:1;
+
+	u8    sas_addr[8];
+	u8    attached_sas_addr[8];
+	u8    attached_phy_id;
+
+	u8    _r_h[7];
+
+	u8    hmin_linkrate:4;
+	u8    pmin_linkrate:4;
+	u8    hmax_linkrate:4;
+	u8    pmax_linkrate:4;
+
+	u8    change_count;
+
+	u8    pptv:4;
+	u8    _r_i:3;
+	u8    virtual:1;
+
+	u8    routing_attr:4;
+	u8    _r_j:4;
+
+	u8    conn_type;
+	u8    conn_el_index;
+	u8    conn_phy_link;
+
+	u8    _r_k[8];
+} __attribute__ ((packed));
+
+struct report_phy_sata_resp {
+	u8    _r_a[5];
+
+	u8    phy_id;
+	u8    _r_b;
+
+	u8    affil_valid:1;
+	u8    affil_supp:1;
+	u8    _r_c:6;
+
+	u32    _r_d;
+
+	u8    stp_sas_addr[8];
+
+	struct dev_to_host_fis fis;
+
+	u32   _r_e;
+
+	u8    affil_stp_ini_addr[8];
+
+	__be32 crc;
+} __attribute__ ((packed));
+
+struct smp_resp {
+	u8    frame_type;
+	u8    function;
+	u8    result;
+	u8    reserved;
+	union {
+		struct report_general_resp  rg;
+		struct discover_resp        disc;
+		struct report_phy_sata_resp rps;
+	};
+} __attribute__ ((packed));
+
+#elif defined(__BIG_ENDIAN_BITFIELD)
+struct sas_identify_frame {
+	/* Byte 0 */
+	u8  _un0:1;
+	u8  dev_type:3;
+	u8  frame_type:4;
+
+	/* Byte 1 */
+	u8  _un1;
+
+	/* Byte 2 */
+	union {
+		struct {
+			u8  _un247:4;
+			u8  ssp_iport:1;
+			u8  stp_iport:1;
+			u8  smp_iport:1;
+			u8  _un20:1;
+		};
+		u8 initiator_bits;
+	};
+
+	/* Byte 3 */
+	union {
+		struct {
+			u8 _un347:4;
+			u8 ssp_tport:1;
+			u8 stp_tport:1;
+			u8 smp_tport:1;
+			u8 _un30:1;
+		};
+		u8 target_bits;
+	};
+
+	/* Byte 4 - 11 */
+	u8 _un4_11[8];
+
+	/* Byte 12 - 19 */
+	u8 sas_addr[SAS_ADDR_SIZE];
+
+	/* Byte 20 */
+	u8 phy_id;
+
+	u8 _un21_27[7];
+
+	__be32 crc;
+} __attribute__ ((packed));
+
+struct ssp_frame_hdr {
+	u8     frame_type;
+	u8     hashed_dest_addr[HASHED_SAS_ADDR_SIZE];
+	u8     _r_a;
+	u8     hashed_src_addr[HASHED_SAS_ADDR_SIZE];
+	__be16 _r_b;
+
+	u8     _r_c:5;
+	u8     retry_data_frames:1;
+	u8     retransmit:1;
+	u8     changing_data_ptr:1;
+
+	u8     _r_d:6;
+	u8     num_fill_bytes:2;
+
+	u32    _r_e;
+	__be16 tag;
+	__be16 tptt;
+	__be32 data_offs;
+} __attribute__ ((packed));
+
+struct ssp_response_iu {
+	u8     _r_a[10];
+
+	u8     _r_b:6;
+	u8     datapres:2;
+
+	u8     status;
+
+	u32    _r_c;
+
+	__be32 sense_data_len;
+	__be32 response_data_len;
+
+	u8     resp_data[0];
+	u8     sense_data[0];
+} __attribute__ ((packed));
+
+/* ---------- SMP ---------- */
+
+struct report_general_resp {
+	__be16  change_count;
+	__be16  route_indexes;
+	u8      _r_a;
+	u8      num_phys;
+
+	u8      _r_b:6;
+	u8      configuring:1;
+	u8      conf_route_table:1;
+
+	u8      _r_c;
+
+	u8      enclosure_logical_id[8];
+
+	u8      _r_d[12];
+} __attribute__ ((packed));
+
+struct discover_resp {
+	u8    _r_a[5];
+
+	u8    phy_id;
+	__be16 _r_b;
+
+	u8    _r_d:1;
+	u8    attached_dev_type:3;
+	u8    _r_c:4;
+
+	u8    _r_e:4;
+	u8    linkrate:4;
+
+	u8    _r_f:4;
+	u8    iproto:3;
+	u8    attached_sata_host:1;
+
+	u8    attached_sata_ps:1;
+	u8    _r_g:3;
+	u8    tproto:3;
+	u8    attached_sata_dev:1;
+
+	u8    sas_addr[8];
+	u8    attached_sas_addr[8];
+	u8    attached_phy_id;
+
+	u8    _r_h[7];
+
+	u8    pmin_linkrate:4;
+	u8    hmin_linkrate:4;
+	u8    pmax_linkrate:4;
+	u8    hmax_linkrate:4;
+
+	u8    change_count;
+
+	u8    virtual:1;
+	u8    _r_i:3;
+	u8    pptv:4;
+
+	u8    _r_j:4;
+	u8    routing_attr:4;
+
+	u8    conn_type;
+	u8    conn_el_index;
+	u8    conn_phy_link;
+
+	u8    _r_k[8];
+} __attribute__ ((packed));
+
+struct report_phy_sata_resp {
+	u8    _r_a[5];
+
+	u8    phy_id;
+	u8    _r_b;
+
+	u8    _r_c:6;
+	u8    affil_supp:1;
+	u8    affil_valid:1;
+
+	u32   _r_d;
+
+	u8    stp_sas_addr[8];
+
+	struct dev_to_host_fis fis;
+
+	u32   _r_e;
+
+	u8    affil_stp_ini_addr[8];
+
+	__be32 crc;
+} __attribute__ ((packed));
+
+struct smp_resp {
+	u8    frame_type;
+	u8    function;
+	u8    result;
+	u8    reserved;
+	union {
+		struct report_general_resp  rg;
+		struct discover_resp        disc;
+		struct report_phy_sata_resp rps;
+	};
+} __attribute__ ((packed));
+
+#else
+#error "Bitfield order not defined!"
+#endif
+
+#endif /* _SAS_H_ */
diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h
index c60b8ff2f5e4..84a6d5fe0920 100644
--- a/include/scsi/scsi.h
+++ b/include/scsi/scsi.h
@@ -25,13 +25,6 @@ extern const unsigned char scsi_command_size[8];
 #define COMMAND_SIZE(opcode) scsi_command_size[((opcode) >> 5) & 7]
 
 /*
- *	SCSI device types
- */
-
-#define MAX_SCSI_DEVICE_CODE 15
-extern const char *const scsi_device_types[MAX_SCSI_DEVICE_CODE];
-
-/*
  * Special value for scanning to specify scanning or rescanning of all
  * possible channels, (target) ids, or luns on a given shost.
  */
@@ -225,6 +218,9 @@ static inline int scsi_status_is_good(int status)
 #define TYPE_RBC	    0x0e
 #define TYPE_NO_LUN         0x7f
 
+/* Returns a human-readable name for the device */
+extern const char * scsi_device_type(unsigned type);
+
 /*
  * standard mode-select header prepended to all mode-select commands
  */
@@ -433,4 +429,10 @@ struct scsi_lun {
 /* Used to obtain the PCI location of a device */
 #define SCSI_IOCTL_GET_PCI		0x5387
 
+/* Pull a u32 out of a SCSI message (using BE SCSI conventions) */
+static inline u32 scsi_to_u32(u8 *ptr)
+{
+	return (ptr[0]<<24) + (ptr[1]<<16) + (ptr[2]<<8) + ptr[3];
+}
+
 #endif /* _SCSI_SCSI_H */
diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h
index 58e6444eebee..be117f812deb 100644
--- a/include/scsi/scsi_cmnd.h
+++ b/include/scsi/scsi_cmnd.h
@@ -118,20 +118,6 @@ struct scsi_cmnd {
 	unsigned long pid;	/* Process ID, starts at 0. Unique per host. */
 };
 
-/*
- * These are the values that scsi_cmd->state can take.
- */
-#define SCSI_STATE_TIMEOUT         0x1000
-#define SCSI_STATE_FINISHED        0x1001
-#define SCSI_STATE_FAILED          0x1002
-#define SCSI_STATE_QUEUED          0x1003
-#define SCSI_STATE_UNUSED          0x1006
-#define SCSI_STATE_DISCONNECTING   0x1008
-#define SCSI_STATE_INITIALIZING    0x1009
-#define SCSI_STATE_BHQUEUE         0x100a
-#define SCSI_STATE_MLQUEUE         0x100b
-
-
 extern struct scsi_cmnd *scsi_get_command(struct scsi_device *, gfp_t);
 extern void scsi_put_command(struct scsi_cmnd *);
 extern void scsi_io_completion(struct scsi_cmnd *, unsigned int);
diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
index b3dd90f3e858..39c6f8cc20c3 100644
--- a/include/scsi/scsi_host.h
+++ b/include/scsi/scsi_host.h
@@ -16,6 +16,7 @@ struct scsi_target;
 struct Scsi_Host;
 struct scsi_host_cmd_pool;
 struct scsi_transport_template;
+struct blk_queue_tags;
 
 
 /*
@@ -466,6 +467,12 @@ struct Scsi_Host {
 	struct scsi_transport_template *transportt;
 
 	/*
+	 * area to keep a shared tag map (if needed, will be
+	 * NULL if not)
+	 */
+	struct blk_queue_tag	*bqt;
+
+	/*
 	 * The following two fields are protected with host_lock;
 	 * however, eh routines can safely access during eh processing
 	 * without acquiring the lock.
diff --git a/include/scsi/scsi_netlink.h b/include/scsi/scsi_netlink.h
new file mode 100644
index 000000000000..8c1470cc8209
--- /dev/null
+++ b/include/scsi/scsi_netlink.h
@@ -0,0 +1,87 @@
+/*
+ *  SCSI Transport Netlink Interface
+ *    Used for the posting of outbound SCSI transport events
+ *
+ *  Copyright (C) 2006   James Smart, Emulex Corporation
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+#ifndef SCSI_NETLINK_H
+#define SCSI_NETLINK_H
+
+/*
+ * This file intended to be included by both kernel and user space
+ */
+
+/* Single Netlink Message type to send all SCSI Transport messages */
+#define SCSI_TRANSPORT_MSG		NLMSG_MIN_TYPE + 1
+
+/* SCSI Transport Broadcast Groups */
+	/* leaving groups 0 and 1 unassigned */
+#define SCSI_NL_GRP_FC_EVENTS		(1<<2)		/* Group 2 */
+#define SCSI_NL_GRP_CNT			3
+
+
+/* SCSI_TRANSPORT_MSG event message header */
+struct scsi_nl_hdr {
+	uint8_t version;
+	uint8_t transport;
+	uint16_t magic;
+	uint16_t msgtype;
+	uint16_t msglen;
+} __attribute__((aligned(sizeof(uint64_t))));
+
+/* scsi_nl_hdr->version value */
+#define SCSI_NL_VERSION				1
+
+/* scsi_nl_hdr->magic value */
+#define SCSI_NL_MAGIC				0xA1B2
+
+/* scsi_nl_hdr->transport value */
+#define SCSI_NL_TRANSPORT			0
+#define SCSI_NL_TRANSPORT_FC			1
+#define SCSI_NL_MAX_TRANSPORTS			2
+
+/* scsi_nl_hdr->msgtype values are defined in each transport */
+
+
+/*
+ * Vendor ID:
+ *   If transports post vendor-unique events, they must pass a well-known
+ *   32-bit vendor identifier. This identifier consists of 8 bits indicating
+ *   the "type" of identifier contained, and 24 bits of id data.
+ *
+ *   Identifiers for each type:
+ *    PCI :  ID data is the 16 bit PCI Registered Vendor ID
+ */
+#define SCSI_NL_VID_TYPE_SHIFT		56
+#define SCSI_NL_VID_TYPE_MASK		((u64)0xFF << SCSI_NL_VID_TYPE_SHIFT)
+#define SCSI_NL_VID_TYPE_PCI		((u64)0x01 << SCSI_NL_VID_TYPE_SHIFT)
+#define SCSI_NL_VID_ID_MASK		(~ SCSI_NL_VID_TYPE_MASK)
+
+
+#define INIT_SCSI_NL_HDR(hdr, t, mtype, mlen)			\
+	{							\
+	(hdr)->version = SCSI_NL_VERSION;			\
+	(hdr)->transport = t;					\
+	(hdr)->magic = SCSI_NL_MAGIC;				\
+	(hdr)->msgtype = mtype;					\
+	(hdr)->msglen = mlen;					\
+	}
+
+
+#endif /* SCSI_NETLINK_H */
+
diff --git a/include/scsi/scsi_netlink_fc.h b/include/scsi/scsi_netlink_fc.h
new file mode 100644
index 000000000000..cbf76e479761
--- /dev/null
+++ b/include/scsi/scsi_netlink_fc.h
@@ -0,0 +1,71 @@
+/*
+ *  FC Transport Netlink Interface
+ *
+ *  Copyright (C) 2006   James Smart, Emulex Corporation
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+#ifndef SCSI_NETLINK_FC_H
+#define SCSI_NETLINK_FC_H
+
+#include <scsi/scsi_netlink.h>
+
+/*
+ * This file intended to be included by both kernel and user space
+ */
+
+/*
+ * FC Transport Message Types
+ */
+	/* kernel -> user */
+#define FC_NL_ASYNC_EVENT			0x0100
+	/* user -> kernel */
+/* none */
+
+
+/*
+ * Message Structures :
+ */
+
+/* macro to round up message lengths to 8byte boundary */
+#define FC_NL_MSGALIGN(len)		(((len) + 7) & ~7)
+
+
+/*
+ * FC Transport Broadcast Event Message :
+ *   FC_NL_ASYNC_EVENT
+ *
+ * Note: if Vendor Unique message, &event_data will be  start of
+ * 	 vendor unique payload, and the length of the payload is
+ *       per event_datalen
+ *
+ * Note: When specifying vendor_id, be sure to read the Vendor Type and ID
+ *   formatting requirements specified in scsi_netlink.h
+ */
+struct fc_nl_event {
+	struct scsi_nl_hdr snlh;		/* must be 1st element ! */
+	uint64_t seconds;
+	uint64_t vendor_id;
+	uint16_t host_no;
+	uint16_t event_datalen;
+	uint32_t event_num;
+	uint32_t event_code;
+	uint32_t event_data;
+} __attribute__((aligned(sizeof(uint64_t))));
+
+
+#endif /* SCSI_NETLINK_FC_H */
+
diff --git a/include/scsi/scsi_tcq.h b/include/scsi/scsi_tcq.h
index e47e36a4ef49..d04d05adfa9b 100644
--- a/include/scsi/scsi_tcq.h
+++ b/include/scsi/scsi_tcq.h
@@ -4,6 +4,7 @@
 #include <linux/blkdev.h>
 #include <scsi/scsi_cmnd.h>
 #include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
 
 
 #define MSG_SIMPLE_TAG	0x20
@@ -66,7 +67,8 @@ static inline void scsi_activate_tcq(struct scsi_device *sdev, int depth)
 		return;
 
 	if (!blk_queue_tagged(sdev->request_queue))
-		blk_queue_init_tags(sdev->request_queue, depth, NULL);
+		blk_queue_init_tags(sdev->request_queue, depth,
+				    sdev->host->bqt);
 
 	scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), depth);
 }
@@ -131,4 +133,15 @@ static inline struct scsi_cmnd *scsi_find_tag(struct scsi_device *sdev, int tag)
 	return sdev->current_cmnd;
 }
 
+/**
+ * scsi_init_shared_tag_map - create a shared tag map
+ * @shost:	the host to share the tag map among all devices
+ * @depth:	the total depth of the map
+ */
+static inline int scsi_init_shared_tag_map(struct Scsi_Host *shost, int depth)
+{
+	shost->bqt = blk_init_tags(depth);
+	return shost->bqt ? 0 : -ENOMEM;
+}
+
 #endif /* _SCSI_SCSI_TCQ_H */
diff --git a/include/scsi/scsi_transport_fc.h b/include/scsi/scsi_transport_fc.h
index 6d28b0317657..fd352323378b 100644
--- a/include/scsi/scsi_transport_fc.h
+++ b/include/scsi/scsi_transport_fc.h
@@ -29,6 +29,7 @@
 
 #include <linux/sched.h>
 #include <scsi/scsi.h>
+#include <scsi/scsi_netlink.h>
 
 struct scsi_transport_template;
 
@@ -194,6 +195,7 @@ struct fc_rport {	/* aka fc_starget_attrs */
 	u32 roles;
 	enum fc_port_state port_state;	/* Will only be ONLINE or UNKNOWN */
 	u32 scsi_target_id;
+	u32 fast_io_fail_tmo;
 
 	/* exported data */
 	void *dd_data;			/* Used for driver-specific storage */
@@ -206,6 +208,7 @@ struct fc_rport {	/* aka fc_starget_attrs */
 	struct device dev;
  	struct work_struct dev_loss_work;
  	struct work_struct scan_work;
+ 	struct work_struct fail_io_work;
  	struct work_struct stgt_delete_work;
 	struct work_struct rport_delete_work;
 } __attribute__((aligned(sizeof(unsigned long))));
@@ -284,6 +287,30 @@ struct fc_host_statistics {
 
 
 /*
+ * FC Event Codes - Polled and Async, following FC HBAAPI v2.0 guidelines
+ */
+
+/*
+ * fc_host_event_code: If you alter this, you also need to alter
+ * scsi_transport_fc.c (for the ascii descriptions).
+ */
+enum fc_host_event_code  {
+	FCH_EVT_LIP			= 0x1,
+	FCH_EVT_LINKUP			= 0x2,
+	FCH_EVT_LINKDOWN		= 0x3,
+	FCH_EVT_LIPRESET		= 0x4,
+	FCH_EVT_RSCN			= 0x5,
+	FCH_EVT_ADAPTER_CHANGE		= 0x103,
+	FCH_EVT_PORT_UNKNOWN		= 0x200,
+	FCH_EVT_PORT_OFFLINE		= 0x201,
+	FCH_EVT_PORT_ONLINE		= 0x202,
+	FCH_EVT_PORT_FABRIC		= 0x204,
+	FCH_EVT_LINK_UNKNOWN		= 0x500,
+	FCH_EVT_VENDOR_UNIQUE		= 0xffff,
+};
+
+
+/*
  * FC Local Port (Host) Attributes
  *
  * Attributes are based on HBAAPI V2.0 definitions.
@@ -312,7 +339,6 @@ struct fc_host_attrs {
 	u64 permanent_port_name;
 	u32 supported_classes;
 	u8  supported_fc4s[FC_FC4_LIST_SIZE];
-	char symbolic_name[FC_SYMBOLIC_NAME_SIZE];
 	u32 supported_speeds;
 	u32 maxframe_size;
 	char serial_number[FC_SERIAL_NUMBER_SIZE];
@@ -324,6 +350,8 @@ struct fc_host_attrs {
 	u8  active_fc4s[FC_FC4_LIST_SIZE];
 	u32 speed;
 	u64 fabric_name;
+	char symbolic_name[FC_SYMBOLIC_NAME_SIZE];
+	char system_hostname[FC_SYMBOLIC_NAME_SIZE];
 
 	/* Private (Transport-managed) Attributes */
 	enum fc_tgtid_binding_type  tgtid_bind_type;
@@ -354,8 +382,6 @@ struct fc_host_attrs {
 	(((struct fc_host_attrs *)(x)->shost_data)->supported_classes)
 #define fc_host_supported_fc4s(x)	\
 	(((struct fc_host_attrs *)(x)->shost_data)->supported_fc4s)
-#define fc_host_symbolic_name(x)	\
-	(((struct fc_host_attrs *)(x)->shost_data)->symbolic_name)
 #define fc_host_supported_speeds(x)	\
 	(((struct fc_host_attrs *)(x)->shost_data)->supported_speeds)
 #define fc_host_maxframe_size(x)	\
@@ -374,6 +400,10 @@ struct fc_host_attrs {
 	(((struct fc_host_attrs *)(x)->shost_data)->speed)
 #define fc_host_fabric_name(x)	\
 	(((struct fc_host_attrs *)(x)->shost_data)->fabric_name)
+#define fc_host_symbolic_name(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->symbolic_name)
+#define fc_host_system_hostname(x)	\
+	(((struct fc_host_attrs *)(x)->shost_data)->system_hostname)
 #define fc_host_tgtid_bind_type(x) \
 	(((struct fc_host_attrs *)(x)->shost_data)->tgtid_bind_type)
 #define fc_host_rports(x) \
@@ -409,12 +439,17 @@ struct fc_function_template {
 	void	(*get_host_active_fc4s)(struct Scsi_Host *);
 	void	(*get_host_speed)(struct Scsi_Host *);
 	void	(*get_host_fabric_name)(struct Scsi_Host *);
+	void	(*get_host_symbolic_name)(struct Scsi_Host *);
+	void	(*set_host_system_hostname)(struct Scsi_Host *);
 
 	struct fc_host_statistics * (*get_fc_host_stats)(struct Scsi_Host *);
 	void	(*reset_fc_host_stats)(struct Scsi_Host *);
 
 	int	(*issue_fc_host_lip)(struct Scsi_Host *);
 
+	void    (*dev_loss_tmo_callbk)(struct fc_rport *);
+	void	(*terminate_rport_io)(struct fc_rport *);
+
 	/* allocation lengths for host-specific data */
 	u32	 			dd_fcrport_size;
 
@@ -445,7 +480,6 @@ struct fc_function_template {
 	unsigned long	show_host_permanent_port_name:1;
 	unsigned long	show_host_supported_classes:1;
 	unsigned long	show_host_supported_fc4s:1;
-	unsigned long	show_host_symbolic_name:1;
 	unsigned long	show_host_supported_speeds:1;
 	unsigned long	show_host_maxframe_size:1;
 	unsigned long	show_host_serial_number:1;
@@ -456,6 +490,8 @@ struct fc_function_template {
 	unsigned long	show_host_active_fc4s:1;
 	unsigned long	show_host_speed:1;
 	unsigned long	show_host_fabric_name:1;
+	unsigned long	show_host_symbolic_name:1;
+	unsigned long	show_host_system_hostname:1;
 };
 
 
@@ -491,6 +527,25 @@ fc_remote_port_chkready(struct fc_rport *rport)
 	return result;
 }
 
+static inline u64 wwn_to_u64(u8 *wwn)
+{
+	return (u64)wwn[0] << 56 | (u64)wwn[1] << 48 |
+	    (u64)wwn[2] << 40 | (u64)wwn[3] << 32 |
+	    (u64)wwn[4] << 24 | (u64)wwn[5] << 16 |
+	    (u64)wwn[6] <<  8 | (u64)wwn[7];
+}
+
+static inline void u64_to_wwn(u64 inm, u8 *wwn)
+{
+	wwn[0] = (inm >> 56) & 0xff;
+	wwn[1] = (inm >> 48) & 0xff;
+	wwn[2] = (inm >> 40) & 0xff;
+	wwn[3] = (inm >> 32) & 0xff;
+	wwn[4] = (inm >> 24) & 0xff;
+	wwn[5] = (inm >> 16) & 0xff;
+	wwn[6] = (inm >> 8) & 0xff;
+	wwn[7] = inm & 0xff;
+}
 
 struct scsi_transport_template *fc_attach_transport(
 			struct fc_function_template *);
@@ -501,13 +556,14 @@ struct fc_rport *fc_remote_port_add(struct Scsi_Host *shost,
 void fc_remote_port_delete(struct fc_rport  *rport);
 void fc_remote_port_rolechg(struct fc_rport  *rport, u32 roles);
 int scsi_is_fc_rport(const struct device *);
-
-static inline u64 wwn_to_u64(u8 *wwn)
-{
-	return (u64)wwn[0] << 56 | (u64)wwn[1] << 48 |
-	    (u64)wwn[2] << 40 | (u64)wwn[3] << 32 |
-	    (u64)wwn[4] << 24 | (u64)wwn[5] << 16 |
-	    (u64)wwn[6] <<  8 | (u64)wwn[7];
-}
+u32 fc_get_event_number(void);
+void fc_host_post_event(struct Scsi_Host *shost, u32 event_number,
+		enum fc_host_event_code event_code, u32 event_data);
+void fc_host_post_vendor_event(struct Scsi_Host *shost, u32 event_number,
+		u32 data_len, char * data_buf, u64 vendor_id);
+	/* Note: when specifying vendor_id to fc_host_post_vendor_event()
+	 *   be sure to read the Vendor Type and ID formatting requirements
+	 *   specified in scsi_netlink.h
+	 */
 
 #endif /* SCSI_TRANSPORT_FC_H */
diff --git a/include/scsi/scsi_transport_sas.h b/include/scsi/scsi_transport_sas.h
index 6cc2314098cf..53024377f3b8 100644
--- a/include/scsi/scsi_transport_sas.h
+++ b/include/scsi/scsi_transport_sas.h
@@ -24,15 +24,23 @@ enum sas_protocol {
 };
 
 enum sas_linkrate {
-	SAS_LINK_RATE_UNKNOWN,
-	SAS_PHY_DISABLED,
-	SAS_LINK_RATE_FAILED,
-	SAS_SATA_SPINUP_HOLD,
-	SAS_SATA_PORT_SELECTOR,
-	SAS_LINK_RATE_1_5_GBPS,
-	SAS_LINK_RATE_3_0_GBPS,
-	SAS_LINK_RATE_6_0_GBPS,
-	SAS_LINK_VIRTUAL,
+	/* These Values are defined in the SAS standard */
+	SAS_LINK_RATE_UNKNOWN = 0,
+	SAS_PHY_DISABLED = 1,
+	SAS_PHY_RESET_PROBLEM = 2,
+	SAS_SATA_SPINUP_HOLD = 3,
+	SAS_SATA_PORT_SELECTOR = 4,
+	SAS_PHY_RESET_IN_PROGRESS = 5,
+	SAS_LINK_RATE_1_5_GBPS = 8,
+	SAS_LINK_RATE_G1 = SAS_LINK_RATE_1_5_GBPS,
+	SAS_LINK_RATE_3_0_GBPS = 9,
+	SAS_LINK_RATE_G2 = SAS_LINK_RATE_3_0_GBPS,
+	SAS_LINK_RATE_6_0_GBPS = 10,
+	/* These are virtual to the transport class and may never
+	 * be signalled normally since the standard defined field
+	 * is only 4 bits */
+	SAS_LINK_RATE_FAILED = 0x10,
+	SAS_PHY_VIRTUAL = 0x11,
 };
 
 struct sas_identify {
@@ -57,9 +65,6 @@ struct sas_phy {
 	enum sas_linkrate	maximum_linkrate_hw;
 	enum sas_linkrate	maximum_linkrate;
 
-	/* internal state */
-	unsigned int		local_attached : 1;
-
 	/* link error statistics */
 	u32			invalid_dword_count;
 	u32			running_disparity_error_count;
@@ -145,12 +150,18 @@ struct sas_port {
 #define transport_class_to_sas_port(cdev) \
 	dev_to_sas_port((cdev)->dev)
 
+struct sas_phy_linkrates {
+	enum sas_linkrate maximum_linkrate;
+	enum sas_linkrate minimum_linkrate;
+};
+
 /* The functions by which the transport class and the driver communicate */
 struct sas_function_template {
 	int (*get_linkerrors)(struct sas_phy *);
 	int (*get_enclosure_identifier)(struct sas_rphy *, u64 *);
 	int (*get_bay_identifier)(struct sas_rphy *);
 	int (*phy_reset)(struct sas_phy *, int);
+	int (*set_phy_speed)(struct sas_phy *, struct sas_phy_linkrates *);
 };
 
 
@@ -196,4 +207,6 @@ scsi_is_sas_expander_device(struct device *dev)
 		rphy->identify.device_type == SAS_EDGE_EXPANDER_DEVICE;
 }
 
+#define scsi_is_sas_phy_local(phy)	scsi_is_host_device((phy)->dev.parent)
+
 #endif /* SCSI_TRANSPORT_SAS_H */