[PATCH] The scheduled removal of some OSS drivers

This patch contains the scheduled removal of OSS drivers that:
- have ALSA drivers for the same hardware without known regressions and
- whose Kconfig options have been removed in 2.6.17.

[michal.k.k.piotrowski@gmail.com: build fix]
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

4 files changed, 0 insertions, 683 deletions

diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index 9e8bcb5fa99c..7d564b6fc98f 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -160,7 +160,6 @@ header-y += video_decoder.h
 header-y += video_encoder.h
 header-y += videotext.h
 header-y += vt.h
-header-y += wavefront.h
 header-y += wireless.h
 header-y += xattr.h
 header-y += x25.h
diff --git a/include/linux/ac97_codec.h b/include/linux/ac97_codec.h
index 2ed2fd855133..22eb9367235a 100644
--- a/include/linux/ac97_codec.h
+++ b/include/linux/ac97_codec.h
@@ -331,8 +331,6 @@ extern int ac97_read_proc (char *page_out, char **start, off_t off,
 extern int ac97_probe_codec(struct ac97_codec *);
 extern unsigned int ac97_set_adc_rate(struct ac97_codec *codec, unsigned int rate);
 extern unsigned int ac97_set_dac_rate(struct ac97_codec *codec, unsigned int rate);
-extern int ac97_save_state(struct ac97_codec *codec);
-extern int ac97_restore_state(struct ac97_codec *codec);
 
 extern struct ac97_codec *ac97_alloc_codec(void);
 extern void ac97_release_codec(struct ac97_codec *codec);
@@ -346,9 +344,6 @@ struct ac97_driver {
 	void (*remove) (struct ac97_codec *codec, struct ac97_driver *driver);
 };
 
-extern int ac97_register_driver(struct ac97_driver *driver);
-extern void ac97_unregister_driver(struct ac97_driver *driver);
-
 /* quirk types */
 enum {
 	AC97_TUNE_DEFAULT = -1, /* use default from quirk list (not valid in list) */
diff --git a/include/linux/sound.h b/include/linux/sound.h
index f63d8342ffa3..9e2a94feed6b 100644
--- a/include/linux/sound.h
+++ b/include/linux/sound.h
@@ -35,10 +35,8 @@ extern int register_sound_special_device(const struct file_operations *fops, int
 extern int register_sound_mixer(const struct file_operations *fops, int dev);
 extern int register_sound_midi(const struct file_operations *fops, int dev);
 extern int register_sound_dsp(const struct file_operations *fops, int dev);
-extern int register_sound_synth(const struct file_operations *fops, int dev);
 
 extern void unregister_sound_special(int unit);
 extern void unregister_sound_mixer(int unit);
 extern void unregister_sound_midi(int unit);
 extern void unregister_sound_dsp(int unit);
-extern void unregister_sound_synth(int unit);
diff --git a/include/linux/wavefront.h b/include/linux/wavefront.h
deleted file mode 100644
index 51ab3c933acd..000000000000
--- a/include/linux/wavefront.h
+++ /dev/null
@@ -1,675 +0,0 @@
-#ifndef __wavefront_h__
-#define __wavefront_h__
-
-/* WaveFront header file.
- *   
- * Copyright (C) by Paul Barton-Davis 1998
- *
- * This program is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
- * Version 2 (June 1991). See the "COPYING" file distributed with this software
- * for more info.  
- */
-
-#if (!defined(__GNUC__) && !defined(__GNUG__))
-
-     You will not be able to compile this file correctly without gcc, because
-     it is necessary to pack the "wavefront_alias" structure to a size
-     of 22 bytes, corresponding to 16-bit alignment (as would have been
-     the case on the original platform, MS-DOS). If this is not done,
-     then WavePatch-format files cannot be read/written correctly.
-     The method used to do this here ("__attribute__((packed)") is
-     completely compiler dependent.
-     
-     All other wavefront_* types end up aligned to 32 bit values and
-     still have the same (correct) size.
-
-#else
-
-     /* However, note that as of G++ 2.7.3.2, g++ was unable to
-	correctly parse *type* __attribute__ tags. It will do the
-	right thing if we use the "packed" attribute on each struct
-	member, which has the same semantics anyway. 
-     */
-
-#endif /* __GNUC__ */
-
-/***************************** WARNING ********************************
-  PLEASE DO NOT MODIFY THIS FILE IN ANY WAY THAT AFFECTS ITS ABILITY TO 
-  BE USED WITH EITHER C *OR* C++.
- **********************************************************************/
-
-#ifndef NUM_MIDIKEYS 
-#define NUM_MIDIKEYS 128
-#endif  /* NUM_MIDIKEYS */
-
-#ifndef NUM_MIDICHANNELS
-#define NUM_MIDICHANNELS 16
-#endif  /* NUM_MIDICHANNELS */
-
-/* These are very useful/important. the original wavefront interface
-   was developed on a 16 bit system, where sizeof(int) = 2
-   bytes. Defining things like this makes the code much more portable, and
-   easier to understand without having to toggle back and forth
-   between a 16-bit view of the world and a 32-bit one. 
- */   
-
-typedef short INT16;
-typedef unsigned short UINT16;
-typedef int INT32;
-typedef unsigned int UINT32;
-typedef char CHAR8;
-typedef unsigned char UCHAR8;
-
-/* Pseudo-commands not part of the WaveFront command set.
-   These are used for various driver controls and direct
-   hardware control.
- */
-
-#define WFC_DEBUG_DRIVER                0
-#define WFC_FX_IOCTL                    1
-#define WFC_PATCH_STATUS                2
-#define WFC_PROGRAM_STATUS              3
-#define WFC_SAMPLE_STATUS               4
-#define WFC_DISABLE_INTERRUPTS          5
-#define WFC_ENABLE_INTERRUPTS           6
-#define WFC_INTERRUPT_STATUS            7
-#define WFC_ROMSAMPLES_RDONLY           8
-#define WFC_IDENTIFY_SLOT_TYPE          9
-
-/* Wavefront synth commands
- */
-
-#define WFC_DOWNLOAD_SAMPLE		0x80
-#define WFC_DOWNLOAD_BLOCK		0x81
-#define WFC_DOWNLOAD_MULTISAMPLE	0x82
-#define WFC_DOWNLOAD_SAMPLE_ALIAS	0x83
-#define WFC_DELETE_SAMPLE		0x84
-#define WFC_REPORT_FREE_MEMORY		0x85
-#define WFC_DOWNLOAD_PATCH		0x86
-#define WFC_DOWNLOAD_PROGRAM		0x87
-#define WFC_SET_SYNTHVOL		0x89
-#define WFC_SET_NVOICES			0x8B
-#define WFC_DOWNLOAD_DRUM		0x90
-#define WFC_GET_SYNTHVOL		0x92
-#define WFC_GET_NVOICES			0x94
-#define WFC_DISABLE_CHANNEL		0x9A
-#define WFC_ENABLE_CHANNEL		0x9B
-#define WFC_MISYNTH_OFF			0x9D
-#define WFC_MISYNTH_ON			0x9E
-#define WFC_FIRMWARE_VERSION		0x9F
-#define WFC_GET_NSAMPLES		0xA0
-#define WFC_DISABLE_DRUM_PROGRAM	0xA2
-#define WFC_UPLOAD_PATCH		0xA3
-#define WFC_UPLOAD_PROGRAM		0xA4
-#define WFC_SET_TUNING			0xA6
-#define WFC_GET_TUNING			0xA7
-#define WFC_VMIDI_ON			0xA8
-#define WFC_VMIDI_OFF			0xA9
-#define WFC_MIDI_STATUS			0xAA
-#define WFC_GET_CHANNEL_STATUS		0xAB
-#define WFC_DOWNLOAD_SAMPLE_HEADER	0xAC
-#define WFC_UPLOAD_SAMPLE_HEADER	0xAD
-#define WFC_UPLOAD_MULTISAMPLE		0xAE
-#define WFC_UPLOAD_SAMPLE_ALIAS		0xAF
-#define WFC_IDENTIFY_SAMPLE_TYPE	0xB0
-#define WFC_DOWNLOAD_EDRUM_PROGRAM	0xB1
-#define WFC_UPLOAD_EDRUM_PROGRAM	0xB2
-#define WFC_SET_EDRUM_CHANNEL		0xB3
-#define WFC_INSTOUT_LEVELS		0xB4
-#define WFC_PEAKOUT_LEVELS		0xB5
-#define WFC_REPORT_CHANNEL_PROGRAMS	0xB6
-#define WFC_HARDWARE_VERSION		0xCF
-#define WFC_UPLOAD_SAMPLE_PARAMS	0xD7
-#define WFC_DOWNLOAD_OS			0xF1
-#define WFC_NOOP                        0xFF
-
-#define WF_MAX_SAMPLE   512
-#define WF_MAX_PATCH    256
-#define WF_MAX_PROGRAM  128
-
-#define WF_SECTION_MAX  44   /* longest OS section length */
-
-/* # of bytes we send to the board when sending it various kinds of
-   substantive data, such as samples, patches and programs.
-*/
-
-#define WF_PROGRAM_BYTES 32
-#define WF_PATCH_BYTES 132
-#define WF_SAMPLE_BYTES 27
-#define WF_SAMPLE_HDR_BYTES 25
-#define WF_ALIAS_BYTES 25
-#define WF_DRUM_BYTES 9
-#define WF_MSAMPLE_BYTES 259 /* (MIDI_KEYS * 2) + 3 */
-
-#define WF_ACK     0x80
-#define WF_DMA_ACK 0x81
-
-/* OR-values for MIDI status bits */
-
-#define WF_MIDI_VIRTUAL_ENABLED 0x1
-#define WF_MIDI_VIRTUAL_IS_EXTERNAL 0x2
-#define WF_MIDI_IN_TO_SYNTH_DISABLED 0x4
-
-/* slot indexes for struct address_info: makes code a little more mnemonic */
-
-#define WF_SYNTH_SLOT         0
-#define WF_INTERNAL_MIDI_SLOT 1
-#define WF_EXTERNAL_MIDI_SLOT 2
-
-/* Magic MIDI bytes used to switch I/O streams on the ICS2115 MPU401
-   emulation. Note these NEVER show up in output from the device and
-   should NEVER be used in input unless Virtual MIDI mode has been 
-   disabled. If they do show up as input, the results are unpredictable.
-*/
-
-#define WF_EXTERNAL_SWITCH  0xFD
-#define WF_INTERNAL_SWITCH  0xF9
-
-/* Debugging flags */
-
-#define WF_DEBUG_CMD 0x1
-#define WF_DEBUG_DATA 0x2
-#define WF_DEBUG_LOAD_PATCH 0x4
-#define WF_DEBUG_IO 0x8
-
-/* WavePatch file format stuff */
-
-#define WF_WAVEPATCH_VERSION     120;  /*  Current version number (1.2)  */
-#define WF_MAX_COMMENT           64    /*  Comment length */
-#define WF_NUM_LAYERS            4
-#define WF_NAME_LENGTH           32
-#define WF_SOURCE_LENGTH         260
-
-#define BankFileID     "Bank"
-#define DrumkitFileID  "DrumKit"
-#define ProgramFileID  "Program"
-
-struct wf_envelope
-{
-    UCHAR8 attack_time:7;
-    UCHAR8 Unused1:1;
-
-    UCHAR8 decay1_time:7;
-    UCHAR8 Unused2:1;
-
-    UCHAR8 decay2_time:7;
-    UCHAR8 Unused3:1;
-
-    UCHAR8 sustain_time:7;
-    UCHAR8 Unused4:1;
-
-    UCHAR8 release_time:7;
-    UCHAR8 Unused5:1;
-
-    UCHAR8 release2_time:7;
-    UCHAR8 Unused6:1;
-
-    CHAR8 attack_level;
-    CHAR8 decay1_level;
-    CHAR8 decay2_level;
-    CHAR8 sustain_level;
-    CHAR8 release_level;
-
-    UCHAR8 attack_velocity:7;
-    UCHAR8 Unused7:1;
-
-    UCHAR8 volume_velocity:7;
-    UCHAR8 Unused8:1;
-
-    UCHAR8 keyboard_scaling:7;
-    UCHAR8 Unused9:1;
-};
-typedef struct wf_envelope wavefront_envelope;
-
-struct wf_lfo
-{
-    UCHAR8 sample_number;
-
-    UCHAR8 frequency:7;
-    UCHAR8 Unused1:1;
-
-    UCHAR8 am_src:4;
-    UCHAR8 fm_src:4;
-
-    CHAR8 fm_amount;
-    CHAR8 am_amount;
-    CHAR8 start_level;
-    CHAR8 end_level;
-
-    UCHAR8 ramp_delay:7;
-    UCHAR8 wave_restart:1; /* for LFO2 only */
-
-    UCHAR8 ramp_time:7;
-    UCHAR8 Unused2:1;
-};
-typedef struct wf_lfo wavefront_lfo;
-
-struct wf_patch
-{
-    INT16  frequency_bias;         /*  ** THIS IS IN MOTOROLA FORMAT!! ** */
-
-    UCHAR8 amplitude_bias:7;
-    UCHAR8 Unused1:1;
-
-    UCHAR8 portamento:7;
-    UCHAR8 Unused2:1;
-
-    UCHAR8 sample_number;
-
-    UCHAR8 pitch_bend:4;
-    UCHAR8 sample_msb:1;
-    UCHAR8 Unused3:3;
-
-    UCHAR8 mono:1;
-    UCHAR8 retrigger:1;
-    UCHAR8 nohold:1;
-    UCHAR8 restart:1;
-    UCHAR8 filterconfig:2; /* SDK says "not used" */
-    UCHAR8 reuse:1;
-    UCHAR8 reset_lfo:1;    
-
-    UCHAR8 fm_src2:4;
-    UCHAR8 fm_src1:4;   
-
-    CHAR8 fm_amount1;
-    CHAR8 fm_amount2;
-
-    UCHAR8 am_src:4;
-    UCHAR8 Unused4:4;
-
-    CHAR8 am_amount;
-
-    UCHAR8 fc1_mode:4;
-    UCHAR8 fc2_mode:4;
-
-    CHAR8 fc1_mod_amount;
-    CHAR8 fc1_keyboard_scaling;
-    CHAR8 fc1_bias;
-    CHAR8 fc2_mod_amount;
-    CHAR8 fc2_keyboard_scaling;
-    CHAR8 fc2_bias;
-
-    UCHAR8 randomizer:7;
-    UCHAR8 Unused5:1;
-
-    struct wf_envelope envelope1;
-    struct wf_envelope envelope2;
-    struct wf_lfo lfo1;
-    struct wf_lfo lfo2;
-};
-typedef struct wf_patch wavefront_patch;
-
-struct wf_layer
-{
-    UCHAR8 patch_number;
-
-    UCHAR8 mix_level:7;
-    UCHAR8 mute:1;
-
-    UCHAR8 split_point:7;
-    UCHAR8 play_below:1;
-
-    UCHAR8 pan_mod_src:2;
-    UCHAR8 pan_or_mod:1;
-    UCHAR8 pan:4;
-    UCHAR8 split_type:1;
-};
-typedef struct wf_layer wavefront_layer;
-
-struct wf_program
-{
-    struct wf_layer layer[WF_NUM_LAYERS];
-};
-typedef struct wf_program wavefront_program;
-
-struct wf_sample_offset
-{
-    INT32 Fraction:4;
-    INT32 Integer:20;
-    INT32 Unused:8;
-};
-typedef struct wf_sample_offset wavefront_sample_offset;          
-     
-/* Sample slot types */
-
-#define WF_ST_SAMPLE      0
-#define WF_ST_MULTISAMPLE 1
-#define WF_ST_ALIAS       2
-#define WF_ST_EMPTY       3
-
-/* pseudo's */
-
-#define WF_ST_DRUM        4
-#define WF_ST_PROGRAM     5
-#define WF_ST_PATCH       6
-#define WF_ST_SAMPLEHDR   7
-
-#define WF_ST_MASK        0xf
-
-/* Flags for slot status. These occupy the upper bits of the same byte
-   as a sample type.
-*/
-
-#define WF_SLOT_USED      0x80   /* XXX don't rely on this being accurate */
-#define WF_SLOT_FILLED    0x40
-#define WF_SLOT_ROM       0x20
-
-#define WF_SLOT_MASK      0xf0
-
-/* channel constants */
-
-#define WF_CH_MONO  0
-#define WF_CH_LEFT  1
-#define WF_CH_RIGHT 2
-
-/* Sample formats */
-
-#define LINEAR_16BIT 0
-#define WHITE_NOISE  1
-#define LINEAR_8BIT  2
-#define MULAW_8BIT   3
-
-#define WF_SAMPLE_IS_8BIT(smpl) ((smpl)->SampleResolution&2)
-
-
-/* 
-
-  Because most/all of the sample data we pass in via pointers has
-  never been copied (just mmap-ed into user space straight from the
-  disk), it would be nice to allow handling of multi-channel sample
-  data without forcing user-level extraction of the relevant bytes.
-  
-  So, we need a way of specifying which channel to use (the WaveFront
-  only handles mono samples in a given slot), and the only way to do
-  this without using some struct other than wavefront_sample as the
-  interface is the awful hack of using the unused bits in a
-  wavefront_sample:
-  
-  Val      Meaning
-  ---      -------
-  0        no channel selection (use channel 1, sample is MONO)
-  1        use first channel, and skip one
-  2        use second channel, and skip one
-  3        use third channel, and skip two
-  4        use fourth channel, skip three
-  5        use fifth channel, skip four
-  6        use six channel, skip five
-
-
-  This can handle up to 4 channels, and anyone downloading >4 channels
-  of sample data just to select one of them needs to find some tools
-  like sox ...
-
-  NOTE: values 0, 1 and 2 correspond to WF_CH_* above. This is 
-  important.
-
-*/
-
-#define WF_SET_CHANNEL(samp,chn) \
- (samp)->Unused1 = chn & 0x1; \
- (samp)->Unused2 = chn & 0x2; \
- (samp)->Unused3 = chn & 0x4 
-  
-#define WF_GET_CHANNEL(samp) \
-  (((samp)->Unused3 << 2)|((samp)->Unused2<<1)|(samp)->Unused1)
-  
-typedef struct wf_sample {
-    struct wf_sample_offset sampleStartOffset;
-    struct wf_sample_offset loopStartOffset;
-    struct wf_sample_offset loopEndOffset;
-    struct wf_sample_offset sampleEndOffset;
-    INT16 FrequencyBias;
-    UCHAR8 SampleResolution:2;  /* sample_format */
-    UCHAR8 Unused1:1;
-    UCHAR8 Loop:1;
-    UCHAR8 Bidirectional:1;
-    UCHAR8 Unused2:1;
-    UCHAR8 Reverse:1;
-    UCHAR8 Unused3:1;
-} wavefront_sample;
-
-typedef struct wf_multisample {
-    INT16 NumberOfSamples;   /* log2 of the number of samples */
-    INT16 SampleNumber[NUM_MIDIKEYS];
-} wavefront_multisample;
-
-typedef struct wf_alias {
-    INT16 OriginalSample;
-
-    struct wf_sample_offset sampleStartOffset;
-    struct wf_sample_offset loopStartOffset;
-    struct wf_sample_offset sampleEndOffset;
-    struct wf_sample_offset loopEndOffset;
-
-    INT16  FrequencyBias;
-
-    UCHAR8 SampleResolution:2;
-    UCHAR8 Unused1:1;
-    UCHAR8 Loop:1;
-    UCHAR8 Bidirectional:1;
-    UCHAR8 Unused2:1;
-    UCHAR8 Reverse:1;
-    UCHAR8 Unused3:1;
-    
-    /* This structure is meant to be padded only to 16 bits on their
-       original. Of course, whoever wrote their documentation didn't
-       realize that sizeof(struct) can be >=
-       sum(sizeof(struct-fields)) and so thought that giving a C level
-       description of the structs used in WavePatch files was
-       sufficient. I suppose it was, as long as you remember the 
-       standard 16->32 bit issues.
-    */
-
-    UCHAR8 sixteen_bit_padding;
-} __attribute__((packed)) wavefront_alias;
-
-typedef struct wf_drum {
-    UCHAR8 PatchNumber;
-    UCHAR8 MixLevel:7;
-    UCHAR8 Unmute:1;
-    UCHAR8 Group:4;
-    UCHAR8 Unused1:4;
-    UCHAR8 PanModSource:2;
-    UCHAR8 PanModulated:1;
-    UCHAR8 PanAmount:4;
-    UCHAR8 Unused2:1;
-} wavefront_drum;
-
-typedef struct wf_drumkit {
-    struct wf_drum drum[NUM_MIDIKEYS];
-} wavefront_drumkit;
-
-typedef struct wf_channel_programs {
-    UCHAR8 Program[NUM_MIDICHANNELS];
-} wavefront_channel_programs;
-
-/* How to get MIDI channel status from the data returned by
-   a WFC_GET_CHANNEL_STATUS command (a struct wf_channel_programs)
-*/
-
-#define WF_CHANNEL_STATUS(ch,wcp) (wcp)[(ch/7)] & (1<<((ch)%7))
-
-typedef union wf_any {
-    wavefront_sample s;
-    wavefront_multisample ms;
-    wavefront_alias a;
-    wavefront_program pr;
-    wavefront_patch p;
-    wavefront_drum d;
-} wavefront_any;
-
-/* Hannu Solvainen hoped that his "patch_info" struct in soundcard.h
-   might work for other wave-table based patch loading situations.
-   Alas, his fears were correct. The WaveFront doesn't even come with
-   just "patches", but several different kind of structures that
-   control the sound generation process.
- */
-
-typedef struct wf_patch_info {
-    
-    /* the first two fields are used by the OSS "patch loading" interface
-       only, and are unused by the current user-level library.
-    */
-
-    INT16   key;               /* Use WAVEFRONT_PATCH here */
-    UINT16  devno;             /* fill in when sending */
-    UCHAR8  subkey;            /* WF_ST_{SAMPLE,ALIAS,etc.} */
-
-#define WAVEFRONT_FIND_FREE_SAMPLE_SLOT 999
-
-    UINT16  number;            /* patch/sample/prog number */
-
-    UINT32  size;              /* size of any data included in 
-				  one of the fields in `hdrptr', or
-				  as `dataptr'.
-
-				  NOTE: for actual samples, this is
-				  the size of the *SELECTED CHANNEL*
-				  even if more data is actually available.
-				  
-				  So, a stereo sample (2 channels) of
-				  6000 bytes total has `size' = 3000.
-
-				  See the macros and comments for
-				  WF_{GET,SET}_CHANNEL above.
-
-			       */
-    wavefront_any __user *hdrptr;      /* user-space ptr to hdr bytes */
-    UINT16 __user *dataptr;            /* actual sample data */
-
-    wavefront_any hdr;          /* kernel-space copy of hdr bytes */         
-} wavefront_patch_info;
-
-/* The maximum number of bytes we will ever move to or from user space
-   in response to a WFC_* command.  This obviously doesn't cover
-   actual sample data.
-*/
-
-#define WF_MAX_READ sizeof(wavefront_multisample)
-#define WF_MAX_WRITE sizeof(wavefront_multisample)
-
-/*
-   This allows us to execute any WF command except the download/upload
-   ones, which are handled differently due to copyin/copyout issues as
-   well as data-nybbling to/from the card.
- */
-
-typedef struct wavefront_control {
-    int cmd;                           /* WFC_* */
-    char status;                       /* return status to user-space */
-    unsigned char rbuf[WF_MAX_READ];   /* bytes read from card */
-    unsigned char wbuf[WF_MAX_WRITE];  /* bytes written to card */
-} wavefront_control;
-
-#define WFCTL_WFCMD    0x1
-#define WFCTL_LOAD_SPP 0x2
-
-/* Modulator table */
-
-#define WF_MOD_LFO1      0
-#define WF_MOD_LFO2      1
-#define WF_MOD_ENV1      2
-#define WF_MOD_ENV2      3
-#define WF_MOD_KEYBOARD  4
-#define WF_MOD_LOGKEY    5
-#define WF_MOD_VELOCITY  6
-#define WF_MOD_LOGVEL    7
-#define WF_MOD_RANDOM    8
-#define WF_MOD_PRESSURE  9
-#define WF_MOD_MOD_WHEEL 10
-#define WF_MOD_1         WF_MOD_MOD_WHEEL 
-#define WF_MOD_BREATH    11
-#define WF_MOD_2         WF_MOD_BREATH
-#define WF_MOD_FOOT      12
-#define WF_MOD_4         WF_MOD_FOOT
-#define WF_MOD_VOLUME    13
-#define WF_MOD_7         WF_MOD_VOLUME
-#define WF_MOD_PAN       14
-#define WF_MOD_10        WF_MOD_PAN
-#define WF_MOD_EXPR      15
-#define WF_MOD_11        WF_MOD_EXPR
-
-/* FX-related material */
-
-typedef struct wf_fx_info {
-    int request;             /* see list below */
-    int data[4];             /* we don't need much */
-} wavefront_fx_info;
-
-/* support for each of these will be forthcoming once I or someone 
-   else has figured out which of the addresses on page 6 and page 7 of 
-   the YSS225 control each parameter. Incidentally, these come from
-   the Windows driver interface, but again, Turtle Beach didn't
-   document the API to use them.
-*/
-
-#define WFFX_SETOUTGAIN		        0
-#define WFFX_SETSTEREOOUTGAIN		1
-#define WFFX_SETREVERBIN1GAIN		2
-#define WFFX_SETREVERBIN2GAIN		3
-#define WFFX_SETREVERBIN3GAIN		4
-#define WFFX_SETCHORUSINPORT		5
-#define WFFX_SETREVERBIN1PORT		6
-#define WFFX_SETREVERBIN2PORT		7
-#define WFFX_SETREVERBIN3PORT		8
-#define WFFX_SETEFFECTPORT		9
-#define WFFX_SETAUXPORT		        10
-#define WFFX_SETREVERBTYPE		11
-#define WFFX_SETREVERBDELAY		12
-#define WFFX_SETCHORUSLFO		13
-#define WFFX_SETCHORUSPMD		14
-#define WFFX_SETCHORUSAMD		15
-#define WFFX_SETEFFECT		        16
-#define WFFX_SETBASEALL		        17
-#define WFFX_SETREVERBALL		18
-#define WFFX_SETCHORUSALL		20
-#define WFFX_SETREVERBDEF		22
-#define WFFX_SETCHORUSDEF		23
-#define WFFX_DELAYSETINGAIN		24
-#define WFFX_DELAYSETFBGAIN	        25
-#define WFFX_DELAYSETFBLPF		26
-#define WFFX_DELAYSETGAIN		27
-#define WFFX_DELAYSETTIME		28
-#define WFFX_DELAYSETFBTIME		29
-#define WFFX_DELAYSETALL		30
-#define WFFX_DELAYSETDEF		32
-#define WFFX_SDELAYSETINGAIN		33
-#define WFFX_SDELAYSETFBGAIN		34
-#define WFFX_SDELAYSETFBLPF		35
-#define WFFX_SDELAYSETGAIN		36
-#define WFFX_SDELAYSETTIME		37
-#define WFFX_SDELAYSETFBTIME		38
-#define WFFX_SDELAYSETALL		39
-#define WFFX_SDELAYSETDEF		41
-#define WFFX_DEQSETINGAIN		42
-#define WFFX_DEQSETFILTER		43
-#define WFFX_DEQSETALL		        44
-#define WFFX_DEQSETDEF		        46
-#define WFFX_MUTE		        47
-#define WFFX_FLANGESETBALANCE	        48	
-#define WFFX_FLANGESETDELAY		49
-#define WFFX_FLANGESETDWFFX_TH		50
-#define WFFX_FLANGESETFBGAIN		51
-#define WFFX_FLANGESETINGAIN		52
-#define WFFX_FLANGESETLFO		53
-#define WFFX_FLANGESETALL		54
-#define WFFX_FLANGESETDEF		56
-#define WFFX_PITCHSETSHIFT		57
-#define WFFX_PITCHSETBALANCE		58
-#define WFFX_PITCHSETALL		59
-#define WFFX_PITCHSETDEF		61
-#define WFFX_SRSSETINGAIN		62
-#define WFFX_SRSSETSPACE		63
-#define WFFX_SRSSETCENTER		64
-#define WFFX_SRSSETGAIN		        65
-#define WFFX_SRSSETMODE	        	66
-#define WFFX_SRSSETDEF		        68
-
-/* Allow direct user-space control over FX memory/coefficient data.
-   In theory this could be used to download the FX microprogram,
-   but it would be a little slower, and involve some weird code.
- */
-
-#define WFFX_MEMSET              69
-
-#endif /* __wavefront_h__ */