Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull second set of media updates from Mauro Carvalho Chehab:
 "Despite its size, most of the stuff here is trivial.  This series
  contains:

   - s5p-mfc: additions at the driver and at the core to support H.264
     hardware codec;
   - Some improvements at s5p and davinci embedded drivers;
   - Some V4L2 compliance fixes applied on a few drivers;
   - Several random trivial patches, including several fixes and a few
     new board support additions;

  Notes:

   1) Some Exynos media patches were dependent on some -arm fixes that
      got merged on changeset 782cd9e.  That's why this pull request is
      based that changeset.

   2) As promised, I reviewed the pending VB2 DMABUF series.

      While setting a test environment, it was noticed that the upstream
      support for Samsung Exynos 4 boards (smdk310 and Origen) are
      broken upstream, likely due to regressions: both defconfigs are
      wrong and regulator settings for both boards are broken.  That,
      allied with some bug at the dummy regulator driver, causes OOPSes
      during boot time.

      Long story short: even fixing the above, the proposed patches
      OOPSed when running the DMABUF test.  Not sure yet if the OOPSes
      are due to some other undetected regressions, or due to some bug
      on the patches.

      Due to the above, DMABUF patches for vb2 got NACKed for 3.7."

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (109 commits)
  [media] m5mols: Add missing #include <linux/sizes.h>
  [media] stk1160: Add support for S-Video input
  Revert "[media] omap3isp: Replace cpu_is_omap3630() with ISP revision check"
  [media]  dvb: LNA implementation changes
  [media] v4l2-ioctl: fix W=1 warnings
  [media] v4l2-ioctl: add blocks check for VIDIOC_SUBDEV_G/S_EDID
  [media] omap3isp: Fix compilation error in ispreg.h
  [media] rc-msi-digivox-ii: Add full scan keycodes
  [media] cx25821: testing the wrong variable
  [media] tda18271-common: hold the I2C adapter during write transfers
  [media] ds3000: add module parameter to force firmware upload
  [media] drivers/media: Remove unnecessary semicolon
  [media] winbond: remove space from driver name
  [media] iguanair: cannot send data from the stack
  [media] omap3isp: Replace cpu_is_omap3630() with ISP revision check
  [media] dvb-usb: print small buffers via %*ph
  [media] uvc: Add return code check at vb2_queue_init()
  [media] em28xx: Replace memcpy with struct assignment
  [media] bt8xx: Add video4linux control V4L2_CID_COLOR_KILLER
  [media] mem2mem_testdev: Use devm_kzalloc() in probe
  ...

Conflicts:
	arch/arm/mach-davinci/include/mach/da8xx.h

12 files changed, 164 insertions, 43 deletions

diff --git a/include/linux/dvb/version.h b/include/linux/dvb/version.h
index 20e5eac2ffd3..827cce7e33e3 100644
--- a/include/linux/dvb/version.h
+++ b/include/linux/dvb/version.h
@@ -24,6 +24,6 @@
 #define _DVBVERSION_H_
 
 #define DVB_API_VERSION 5
-#define DVB_API_VERSION_MINOR 8
+#define DVB_API_VERSION_MINOR 9
 
 #endif /*_DVBVERSION_H_*/
diff --git a/include/linux/platform_data/mipi-csis.h b/include/linux/platform_data/mipi-csis.h
index c45b1e8d4c2e..bf34e17cee7f 100644
--- a/include/linux/platform_data/mipi-csis.h
+++ b/include/linux/platform_data/mipi-csis.h
@@ -1,7 +1,7 @@
 /*
- * Copyright (C) 2010-2011 Samsung Electronics Co., Ltd.
+ * Copyright (C) 2010 - 2012 Samsung Electronics Co., Ltd.
  *
- * S5P series MIPI CSI slave device support
+ * Samsung S5P/Exynos SoC series MIPI CSIS device support
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -11,33 +11,27 @@
 #ifndef __PLAT_SAMSUNG_MIPI_CSIS_H_
 #define __PLAT_SAMSUNG_MIPI_CSIS_H_ __FILE__
 
-struct platform_device;
-
 /**
  * struct s5p_platform_mipi_csis - platform data for S5P MIPI-CSIS driver
- * @clk_rate: bus clock frequency
- * @lanes: number of data lanes used
- * @alignment: data alignment in bits
- * @hs_settle: HS-RX settle time
- * @fixed_phy_vdd: false to enable external D-PHY regulator management in the
- *		   driver or true in case this regulator has no enable function
- * @phy_enable: pointer to a callback controlling D-PHY enable/reset
+ * @clk_rate:    bus clock frequency
+ * @wclk_source: CSI wrapper clock selection: 0 - bus clock, 1 - ext. SCLK_CAM
+ * @lanes:       number of data lanes used
+ * @hs_settle:   HS-RX settle time
  */
 struct s5p_platform_mipi_csis {
 	unsigned long clk_rate;
+	u8 wclk_source;
 	u8 lanes;
-	u8 alignment;
 	u8 hs_settle;
-	bool fixed_phy_vdd;
-	int (*phy_enable)(struct platform_device *pdev, bool on);
 };
 
 /**
  * s5p_csis_phy_enable - global MIPI-CSI receiver D-PHY control
- * @pdev: MIPI-CSIS platform device
- * @on: true to enable D-PHY and deassert its reset
- *	false to disable D-PHY
+ * @id:     MIPI-CSIS harware instance index (0...1)
+ * @on:     true to enable D-PHY and deassert its reset
+ *          false to disable D-PHY
+ * @return: 0 on success, or negative error code on failure
  */
-int s5p_csis_phy_enable(struct platform_device *pdev, bool on);
+int s5p_csis_phy_enable(int id, bool on);
 
 #endif /* __PLAT_SAMSUNG_MIPI_CSIS_H_ */
diff --git a/include/linux/v4l2-controls.h b/include/linux/v4l2-controls.h
index 421d24c7f686..f56c945cecd4 100644
--- a/include/linux/v4l2-controls.h
+++ b/include/linux/v4l2-controls.h
@@ -349,6 +349,7 @@ enum v4l2_mpeg_video_multi_slice_mode {
 #define V4L2_CID_MPEG_VIDEO_VBV_SIZE			(V4L2_CID_MPEG_BASE+222)
 #define V4L2_CID_MPEG_VIDEO_DEC_PTS			(V4L2_CID_MPEG_BASE+223)
 #define V4L2_CID_MPEG_VIDEO_DEC_FRAME			(V4L2_CID_MPEG_BASE+224)
+#define V4L2_CID_MPEG_VIDEO_VBV_DELAY			(V4L2_CID_MPEG_BASE+225)
 
 #define V4L2_CID_MPEG_VIDEO_H263_I_FRAME_QP		(V4L2_CID_MPEG_BASE+300)
 #define V4L2_CID_MPEG_VIDEO_H263_P_FRAME_QP		(V4L2_CID_MPEG_BASE+301)
@@ -439,6 +440,46 @@ enum v4l2_mpeg_video_h264_vui_sar_idc {
 	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_2x1		= 16,
 	V4L2_MPEG_VIDEO_H264_VUI_SAR_IDC_EXTENDED	= 17,
 };
+#define V4L2_CID_MPEG_VIDEO_H264_SEI_FRAME_PACKING		(V4L2_CID_MPEG_BASE+368)
+#define V4L2_CID_MPEG_VIDEO_H264_SEI_FP_CURRENT_FRAME_0		(V4L2_CID_MPEG_BASE+369)
+#define V4L2_CID_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE	(V4L2_CID_MPEG_BASE+370)
+enum v4l2_mpeg_video_h264_sei_fp_arrangement_type {
+	V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_CHECKERBOARD	= 0,
+	V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_COLUMN		= 1,
+	V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_ROW		= 2,
+	V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_SIDE_BY_SIDE	= 3,
+	V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_TOP_BOTTOM		= 4,
+	V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_TEMPORAL		= 5,
+};
+#define V4L2_CID_MPEG_VIDEO_H264_FMO			(V4L2_CID_MPEG_BASE+371)
+#define V4L2_CID_MPEG_VIDEO_H264_FMO_MAP_TYPE		(V4L2_CID_MPEG_BASE+372)
+enum v4l2_mpeg_video_h264_fmo_map_type {
+	V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_INTERLEAVED_SLICES		= 0,
+	V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_SCATTERED_SLICES		= 1,
+	V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_FOREGROUND_WITH_LEFT_OVER	= 2,
+	V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_BOX_OUT			= 3,
+	V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_RASTER_SCAN			= 4,
+	V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_WIPE_SCAN			= 5,
+	V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_EXPLICIT			= 6,
+};
+#define V4L2_CID_MPEG_VIDEO_H264_FMO_SLICE_GROUP	(V4L2_CID_MPEG_BASE+373)
+#define V4L2_CID_MPEG_VIDEO_H264_FMO_CHANGE_DIRECTION	(V4L2_CID_MPEG_BASE+374)
+enum v4l2_mpeg_video_h264_fmo_change_dir {
+	V4L2_MPEG_VIDEO_H264_FMO_CHANGE_DIR_RIGHT	= 0,
+	V4L2_MPEG_VIDEO_H264_FMO_CHANGE_DIR_LEFT	= 1,
+};
+#define V4L2_CID_MPEG_VIDEO_H264_FMO_CHANGE_RATE	(V4L2_CID_MPEG_BASE+375)
+#define V4L2_CID_MPEG_VIDEO_H264_FMO_RUN_LENGTH		(V4L2_CID_MPEG_BASE+376)
+#define V4L2_CID_MPEG_VIDEO_H264_ASO			(V4L2_CID_MPEG_BASE+377)
+#define V4L2_CID_MPEG_VIDEO_H264_ASO_SLICE_ORDER	(V4L2_CID_MPEG_BASE+378)
+#define V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING		(V4L2_CID_MPEG_BASE+379)
+#define V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING_TYPE	(V4L2_CID_MPEG_BASE+380)
+enum v4l2_mpeg_video_h264_hierarchical_coding_type {
+	V4L2_MPEG_VIDEO_H264_HIERARCHICAL_CODING_B	= 0,
+	V4L2_MPEG_VIDEO_H264_HIERARCHICAL_CODING_P	= 1,
+};
+#define V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING_LAYER	(V4L2_CID_MPEG_BASE+381)
+#define V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING_LAYER_QP	(V4L2_CID_MPEG_BASE+382)
 #define V4L2_CID_MPEG_VIDEO_MPEG4_I_FRAME_QP	(V4L2_CID_MPEG_BASE+400)
 #define V4L2_CID_MPEG_VIDEO_MPEG4_P_FRAME_QP	(V4L2_CID_MPEG_BASE+401)
 #define V4L2_CID_MPEG_VIDEO_MPEG4_B_FRAME_QP	(V4L2_CID_MPEG_BASE+402)
@@ -757,5 +798,6 @@ enum v4l2_jpeg_chroma_subsampling {
 
 #define V4L2_CID_LINK_FREQ			(V4L2_CID_IMAGE_PROC_CLASS_BASE + 1)
 #define V4L2_CID_PIXEL_RATE			(V4L2_CID_IMAGE_PROC_CLASS_BASE + 2)
+#define V4L2_CID_TEST_PATTERN			(V4L2_CID_IMAGE_PROC_CLASS_BASE + 3)
 
 #endif
diff --git a/include/linux/v4l2-mediabus.h b/include/linux/v4l2-mediabus.h
index 5ea7f753a348..7d64e0e1a18b 100644
--- a/include/linux/v4l2-mediabus.h
+++ b/include/linux/v4l2-mediabus.h
@@ -92,6 +92,11 @@ enum v4l2_mbus_pixelcode {
 
 	/* JPEG compressed formats - next is 0x4002 */
 	V4L2_MBUS_FMT_JPEG_1X8 = 0x4001,
+
+	/* Vendor specific formats - next is 0x5002 */
+
+	/* S5C73M3 sensor specific interleaved UYVY and JPEG */
+	V4L2_MBUS_FMT_S5C_UYVY_JPEG_1X8 = 0x5001,
 };
 
 /**
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index 61395ef85a00..873adbe82988 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -366,7 +366,9 @@ struct v4l2_pix_format {
 
 /* two non contiguous planes - one Y, one Cr + Cb interleaved  */
 #define V4L2_PIX_FMT_NV12M   v4l2_fourcc('N', 'M', '1', '2') /* 12  Y/CbCr 4:2:0  */
+#define V4L2_PIX_FMT_NV21M   v4l2_fourcc('N', 'M', '2', '1') /* 21  Y/CrCb 4:2:0  */
 #define V4L2_PIX_FMT_NV12MT  v4l2_fourcc('T', 'M', '1', '2') /* 12  Y/CbCr 4:2:0 64x32 macroblocks */
+#define V4L2_PIX_FMT_NV12MT_16X16 v4l2_fourcc('V', 'M', '1', '2') /* 12  Y/CbCr 4:2:0 16x16 macroblocks */
 
 /* three non contiguous planes - Y, Cb, Cr */
 #define V4L2_PIX_FMT_YUV420M v4l2_fourcc('Y', 'M', '1', '2') /* 12  YUV420 planar */
@@ -403,6 +405,7 @@ struct v4l2_pix_format {
 #define V4L2_PIX_FMT_MPEG     v4l2_fourcc('M', 'P', 'E', 'G') /* MPEG-1/2/4 Multiplexed */
 #define V4L2_PIX_FMT_H264     v4l2_fourcc('H', '2', '6', '4') /* H264 with start codes */
 #define V4L2_PIX_FMT_H264_NO_SC v4l2_fourcc('A', 'V', 'C', '1') /* H264 without start codes */
+#define V4L2_PIX_FMT_H264_MVC v4l2_fourcc('M', '2', '6', '4') /* H264 MVC */
 #define V4L2_PIX_FMT_H263     v4l2_fourcc('H', '2', '6', '3') /* H263          */
 #define V4L2_PIX_FMT_MPEG1    v4l2_fourcc('M', 'P', 'G', '1') /* MPEG-1 ES     */
 #define V4L2_PIX_FMT_MPEG2    v4l2_fourcc('M', 'P', 'G', '2') /* MPEG-2 ES     */
@@ -410,6 +413,7 @@ struct v4l2_pix_format {
 #define V4L2_PIX_FMT_XVID     v4l2_fourcc('X', 'V', 'I', 'D') /* Xvid           */
 #define V4L2_PIX_FMT_VC1_ANNEX_G v4l2_fourcc('V', 'C', '1', 'G') /* SMPTE 421M Annex G compliant stream */
 #define V4L2_PIX_FMT_VC1_ANNEX_L v4l2_fourcc('V', 'C', '1', 'L') /* SMPTE 421M Annex L compliant stream */
+#define V4L2_PIX_FMT_VP8      v4l2_fourcc('V', 'P', '8', '0') /* VP8 */
 
 /*  Vendor-specific formats   */
 #define V4L2_PIX_FMT_CPIA1    v4l2_fourcc('C', 'P', 'I', 'A') /* cpia1 YUV */
@@ -437,6 +441,7 @@ struct v4l2_pix_format {
 #define V4L2_PIX_FMT_KONICA420  v4l2_fourcc('K', 'O', 'N', 'I') /* YUV420 planar in blocks of 256 pixels */
 #define V4L2_PIX_FMT_JPGL	v4l2_fourcc('J', 'P', 'G', 'L') /* JPEG-Lite */
 #define V4L2_PIX_FMT_SE401      v4l2_fourcc('S', '4', '0', '1') /* se401 janggu compressed rgb */
+#define V4L2_PIX_FMT_S5C_UYVY_JPG v4l2_fourcc('S', '5', 'C', 'I') /* S5C73M3 interleaved UYVY/JPEG */
 
 /*
  *	F O R M A T   E N U M E R A T I O N
diff --git a/include/media/davinci/vpbe.h b/include/media/davinci/vpbe.h
index 8bc1b3c0e679..a7ca4884c46c 100644
--- a/include/media/davinci/vpbe.h
+++ b/include/media/davinci/vpbe.h
@@ -35,7 +35,7 @@ struct osd_config_info {
 struct vpbe_output {
 	struct v4l2_output output;
 	/*
-	 * If output capabilities include dv_preset, list supported presets
+	 * If output capabilities include dv_timings, list supported timings
 	 * below
 	 */
 	char *subdev_name;
@@ -120,16 +120,16 @@ struct vpbe_device_ops {
 	unsigned int (*get_output)(struct vpbe_device *vpbe_dev);
 
 	/* Set DV preset at current output */
-	int (*s_dv_preset)(struct vpbe_device *vpbe_dev,
-			   struct v4l2_dv_preset *dv_preset);
+	int (*s_dv_timings)(struct vpbe_device *vpbe_dev,
+			   struct v4l2_dv_timings *dv_timings);
 
 	/* Get DV presets supported at the output */
-	int (*g_dv_preset)(struct vpbe_device *vpbe_dev,
-			   struct v4l2_dv_preset *dv_preset);
+	int (*g_dv_timings)(struct vpbe_device *vpbe_dev,
+			   struct v4l2_dv_timings *dv_timings);
 
 	/* Enumerate the DV Presets supported at the output */
-	int (*enum_dv_presets)(struct vpbe_device *vpbe_dev,
-			       struct v4l2_dv_enum_preset *preset_info);
+	int (*enum_dv_timings)(struct vpbe_device *vpbe_dev,
+			       struct v4l2_enum_dv_timings *timings_info);
 
 	/* Set std at the output */
 	int (*s_std)(struct vpbe_device *vpbe_dev, v4l2_std_id *std_id);
diff --git a/include/media/davinci/vpbe_types.h b/include/media/davinci/vpbe_types.h
index 727f55170e41..9b85396514be 100644
--- a/include/media/davinci/vpbe_types.h
+++ b/include/media/davinci/vpbe_types.h
@@ -32,11 +32,6 @@ enum vpbe_enc_timings_type {
 	VPBE_ENC_TIMINGS_INVALID = 0x8,
 };
 
-union vpbe_timings {
-	v4l2_std_id std_id;
-	unsigned int dv_preset;
-};
-
 /*
  * struct vpbe_enc_mode_info
  * @name: ptr to name string of the standard, "NTSC", "PAL" etc
@@ -73,7 +68,8 @@ union vpbe_timings {
 struct vpbe_enc_mode_info {
 	unsigned char *name;
 	enum vpbe_enc_timings_type timings_type;
-	union vpbe_timings timings;
+	v4l2_std_id std_id;
+	struct v4l2_dv_timings dv_timings;
 	unsigned int interlaced;
 	unsigned int xres;
 	unsigned int yres;
diff --git a/include/media/davinci/vpbe_venc.h b/include/media/davinci/vpbe_venc.h
index 6b57334f4029..cc78c2eb16da 100644
--- a/include/media/davinci/vpbe_venc.h
+++ b/include/media/davinci/vpbe_venc.h
@@ -32,7 +32,7 @@ struct venc_platform_data {
 	int (*setup_pinmux)(enum v4l2_mbus_pixelcode if_type,
 			    int field);
 	int (*setup_clock)(enum vpbe_enc_timings_type type,
-			   unsigned int mode);
+			   unsigned int pixclock);
 	int (*setup_if_config)(enum v4l2_mbus_pixelcode pixcode);
 	/* Number of LCD outputs supported */
 	int num_lcd_outputs;
diff --git a/include/media/davinci/vpif_types.h b/include/media/davinci/vpif_types.h
index d8f6ab1943e4..3882e0675ccf 100644
--- a/include/media/davinci/vpif_types.h
+++ b/include/media/davinci/vpif_types.h
@@ -20,6 +20,7 @@
 #include <linux/i2c.h>
 
 #define VPIF_CAPTURE_MAX_CHANNELS	2
+#define VPIF_DISPLAY_MAX_CHANNELS	2
 
 enum vpif_if_type {
 	VPIF_IF_BT656,
@@ -37,29 +38,38 @@ struct vpif_interface {
 struct vpif_subdev_info {
 	const char *name;
 	struct i2c_board_info board_info;
-	u32 input;
-	u32 output;
-	unsigned can_route:1;
-	struct vpif_interface vpif_if;
+};
+
+struct vpif_output {
+	struct v4l2_output output;
+	const char *subdev_name;
+	u32 input_route;
+	u32 output_route;
+};
+
+struct vpif_display_chan_config {
+	const struct vpif_output *outputs;
+	int output_count;
+	bool clip_en;
 };
 
 struct vpif_display_config {
 	int (*set_clock)(int, int);
 	struct vpif_subdev_info *subdevinfo;
 	int subdev_count;
-	const char **output;
-	int output_count;
+	struct vpif_display_chan_config chan_config[VPIF_DISPLAY_MAX_CHANNELS];
 	const char *card_name;
-	bool ch2_clip_en;
-	bool ch3_clip_en;
 };
 
 struct vpif_input {
 	struct v4l2_input input;
 	const char *subdev_name;
+	u32 input_route;
+	u32 output_route;
 };
 
 struct vpif_capture_chan_config {
+	struct vpif_interface vpif_if;
 	const struct vpif_input *inputs;
 	int input_count;
 };
diff --git a/include/media/s5p_fimc.h b/include/media/s5p_fimc.h
index 09421a611d73..eaea62a382f8 100644
--- a/include/media/s5p_fimc.h
+++ b/include/media/s5p_fimc.h
@@ -30,7 +30,6 @@ struct i2c_board_info;
  * @board_info: pointer to I2C subdevice's board info
  * @clk_frequency: frequency of the clock the host interface provides to sensor
  * @bus_type: determines bus type, MIPI, ITU-R BT.601 etc.
- * @csi_data_align: MIPI-CSI interface data alignment in bits
  * @i2c_bus_num: i2c control bus id the sensor is attached to
  * @mux_id: FIMC camera interface multiplexer index (separate for MIPI and ITU)
  * @clk_id: index of the SoC peripheral clock for sensors
@@ -40,7 +39,6 @@ struct s5p_fimc_isp_info {
 	struct i2c_board_info *board_info;
 	unsigned long clk_frequency;
 	enum cam_bus_type bus_type;
-	u16 csi_data_align;
 	u16 i2c_bus_num;
 	u16 mux_id;
 	u16 flags;
diff --git a/include/media/v4l2-ctrls.h b/include/media/v4l2-ctrls.h
index 801adb466bd2..96509119f28f 100644
--- a/include/media/v4l2-ctrls.h
+++ b/include/media/v4l2-ctrls.h
@@ -351,6 +351,29 @@ struct v4l2_ctrl *v4l2_ctrl_new_std_menu(struct v4l2_ctrl_handler *hdl,
 			const struct v4l2_ctrl_ops *ops,
 			u32 id, s32 max, s32 mask, s32 def);
 
+/** v4l2_ctrl_new_std_menu_items() - Create a new standard V4L2 menu control
+  * with driver specific menu.
+  * @hdl:	The control handler.
+  * @ops:	The control ops.
+  * @id:	The control ID.
+  * @max:	The control's maximum value.
+  * @mask:	The control's skip mask for menu controls. This makes it
+  *		easy to skip menu items that are not valid. If bit X is set,
+  *		then menu item X is skipped. Of course, this only works for
+  *		menus with <= 32 menu items. There are no menus that come
+  *		close to that number, so this is OK. Should we ever need more,
+  *		then this will have to be extended to a u64 or a bit array.
+  * @def:	The control's default value.
+  * @qmenu:	The new menu.
+  *
+  * Same as v4l2_ctrl_new_std_menu(), but @qmenu will be the driver specific
+  * menu of this control.
+  *
+  */
+struct v4l2_ctrl *v4l2_ctrl_new_std_menu_items(struct v4l2_ctrl_handler *hdl,
+			const struct v4l2_ctrl_ops *ops, u32 id, s32 max,
+			s32 mask, s32 def, const char * const *qmenu);
+
 /** v4l2_ctrl_new_int_menu() - Create a new standard V4L2 integer menu control.
   * @hdl:	The control handler.
   * @ops:	The control ops.
diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
index 2ecd7377153b..b137a5e1151a 100644
--- a/include/media/v4l2-subdev.h
+++ b/include/media/v4l2-subdev.h
@@ -21,6 +21,7 @@
 #ifndef _V4L2_SUBDEV_H
 #define _V4L2_SUBDEV_H
 
+#include <linux/types.h>
 #include <linux/v4l2-subdev.h>
 #include <media/media-entity.h>
 #include <media/v4l2-common.h>
@@ -45,6 +46,7 @@ struct v4l2_fh;
 struct v4l2_subdev;
 struct v4l2_subdev_fh;
 struct tuner_setup;
+struct v4l2_mbus_frame_desc;
 
 /* decode_vbi_line */
 struct v4l2_decode_vbi_line {
@@ -226,6 +228,36 @@ struct v4l2_subdev_audio_ops {
 	int (*s_stream)(struct v4l2_subdev *sd, int enable);
 };
 
+/* Indicates the @length field specifies maximum data length. */
+#define V4L2_MBUS_FRAME_DESC_FL_LEN_MAX		(1U << 0)
+/* Indicates user defined data format, i.e. non standard frame format. */
+#define V4L2_MBUS_FRAME_DESC_FL_BLOB		(1U << 1)
+
+/**
+ * struct v4l2_mbus_frame_desc_entry - media bus frame description structure
+ * @flags: V4L2_MBUS_FRAME_DESC_FL_* flags
+ * @pixelcode: media bus pixel code, valid if FRAME_DESC_FL_BLOB is not set
+ * @length: number of octets per frame, valid for compressed or unspecified
+ *          formats
+ */
+struct v4l2_mbus_frame_desc_entry {
+	u16 flags;
+	u32 pixelcode;
+	u32 length;
+};
+
+#define V4L2_FRAME_DESC_ENTRY_MAX	4
+
+/**
+ * struct v4l2_mbus_frame_desc - media bus data frame description
+ * @entry: frame descriptors array
+ * @num_entries: number of entries in @entry array
+ */
+struct v4l2_mbus_frame_desc {
+	struct v4l2_mbus_frame_desc_entry entry[V4L2_FRAME_DESC_ENTRY_MAX];
+	unsigned short num_entries;
+};
+
 /*
    s_std_output: set v4l2_std_id for video OUTPUT devices. This is ignored by
 	video input devices.
@@ -274,6 +306,10 @@ struct v4l2_subdev_audio_ops {
    s_mbus_config: set a certain mediabus configuration. This operation is added
 	for compatibility with soc-camera drivers and should not be used by new
 	software.
+
+   s_rx_buffer: set a host allocated memory buffer for the subdev. The subdev
+	can adjust @size to a lower value and must not write more data to the
+	buffer starting at @data than the original value of @size.
  */
 struct v4l2_subdev_video_ops {
 	int (*s_routing)(struct v4l2_subdev *sd, u32 input, u32 output, u32 config);
@@ -327,6 +363,8 @@ struct v4l2_subdev_video_ops {
 			     struct v4l2_mbus_config *cfg);
 	int (*s_mbus_config)(struct v4l2_subdev *sd,
 			     const struct v4l2_mbus_config *cfg);
+	int (*s_rx_buffer)(struct v4l2_subdev *sd, void *buf,
+			   unsigned int *size);
 };
 
 /*
@@ -455,6 +493,12 @@ struct v4l2_subdev_ir_ops {
 				struct v4l2_subdev_ir_parameters *params);
 };
 
+/**
+ * struct v4l2_subdev_pad_ops - v4l2-subdev pad level operations
+ * @get_frame_desc: get the current low level media bus frame parameters.
+ * @get_frame_desc: set the low level media bus frame parameters, @fd array
+ *                  may be adjusted by the subdev driver to device capabilities.
+ */
 struct v4l2_subdev_pad_ops {
 	int (*enum_mbus_code)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
 			      struct v4l2_subdev_mbus_code_enum *code);
@@ -483,6 +527,10 @@ struct v4l2_subdev_pad_ops {
 			     struct v4l2_subdev_format *source_fmt,
 			     struct v4l2_subdev_format *sink_fmt);
 #endif /* CONFIG_MEDIA_CONTROLLER */
+	int (*get_frame_desc)(struct v4l2_subdev *sd, unsigned int pad,
+			      struct v4l2_mbus_frame_desc *fd);
+	int (*set_frame_desc)(struct v4l2_subdev *sd, unsigned int pad,
+			      struct v4l2_mbus_frame_desc *fd);
 };
 
 struct v4l2_subdev_ops {