avoid overflows in kernel/time.c

When the conversion factor between jiffies and milli- or microseconds is
not a single multiply or divide, as for the case of HZ == 300, we currently
do a multiply followed by a divide.  The intervening result, however, is
subject to overflows, especially since the fraction is not simplified (for
HZ == 300, we multiply by 300 and divide by 1000).

This is exposed to the user when passing a large timeout to poll(), for
example.

This patch replaces the multiply-divide with a reciprocal multiplication on
32-bit platforms.  When the input is an unsigned long, there is no portable
way to do this on 64-bit platforms there is no portable way to do this
since it requires a 128-bit intermediate result (which gcc does support on
64-bit platforms but may generate libgcc calls, e.g.  on 64-bit s390), but
since the output is a 32-bit integer in the cases affected, just simplify
the multiply-divide (*3/10 instead of *300/1000).

The reciprocal multiply used can have off-by-one errors in the upper half
of the valid output range.  This could be avoided at the expense of having
to deal with a potential 65-bit intermediate result.  Since the intent is
to avoid overflow problems and most of the other time conversions are only
semiexact, the off-by-one errors were considered an acceptable tradeoff.

At Ralf Baechle's suggestion, this version uses a Perl script to compute
the necessary constants.  We already have dependencies on Perl for kernel
compiles.  This does, however, require the Perl module Math::BigInt, which
is included in the standard Perl distribution starting with version 5.8.0.
In order to support older versions of Perl, include a table of canned
constants in the script itself, and structure the script so that
Math::BigInt isn't required if pulling values from said table.

Running the script requires that the HZ value is available from the
Makefile.  Thus, this patch also adds the Kconfig variable CONFIG_HZ to the
architectures which didn't already have it (alpha, cris, frv, h8300, m32r,
m68k, m68knommu, sparc, v850, and xtensa.) It does *not* touch the sh or
sh64 architectures, since Paul Mundt has dealt with those separately in the
sh tree.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Ralf Baechle <ralf@linux-mips.org>,
Cc: Sam Ravnborg <sam@ravnborg.org>,
Cc: Paul Mundt <lethal@linux-sh.org>,
Cc: Richard Henderson <rth@twiddle.net>,
Cc: Michael Starvik <starvik@axis.com>,
Cc: David Howells <dhowells@redhat.com>,
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>,
Cc: Hirokazu Takata <takata@linux-m32r.org>,
Cc: Geert Uytterhoeven <geert@linux-m68k.org>,
Cc: Roman Zippel <zippel@linux-m68k.org>,
Cc: William L. Irwin <sparclinux@vger.kernel.org>,
Cc: Chris Zankel <chris@zankel.net>,
Cc: H. Peter Anvin <hpa@zytor.com>,
Cc: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

16 files changed, 10 insertions, 60 deletions

diff --git a/include/asm-alpha/param.h b/include/asm-alpha/param.h
index 214e7996346f..0982f1d39499 100644
--- a/include/asm-alpha/param.h
+++ b/include/asm-alpha/param.h
@@ -5,15 +5,7 @@
    hardware ignores reprogramming.  We also need userland buy-in to the 
    change in HZ, since this is visible in the wait4 resources etc.  */
 
-
-#ifndef HZ
-# ifndef CONFIG_ALPHA_RAWHIDE
-#  define HZ	1024
-# else
-#  define HZ	1200
-# endif
-#endif
-
+#define HZ		CONFIG_HZ
 #define USER_HZ		HZ
 
 #define EXEC_PAGESIZE	8192
diff --git a/include/asm-cris/param.h b/include/asm-cris/param.h
index b24972639832..0e47994e40be 100644
--- a/include/asm-cris/param.h
+++ b/include/asm-cris/param.h
@@ -3,7 +3,7 @@
 
 /* Currently we assume that HZ=100 is good for CRIS. */
 #ifdef __KERNEL__
-# define HZ		100		/* Internal kernel timer frequency */
+# define HZ		CONFIG_HZ	/* Internal kernel timer frequency */
 # define USER_HZ	100		/* .. some user interfaces are in "ticks" */
 # define CLOCKS_PER_SEC	(USER_HZ)	/* like times() */
 #endif
diff --git a/include/asm-frv/param.h b/include/asm-frv/param.h
index 365653b1726c..6859dd503ed3 100644
--- a/include/asm-frv/param.h
+++ b/include/asm-frv/param.h
@@ -2,7 +2,7 @@
 #define _ASM_PARAM_H
 
 #ifdef __KERNEL__
-#define HZ		1000		/* Internal kernel timer frequency */
+#define HZ		CONFIG_HZ	/* Internal kernel timer frequency */
 #define USER_HZ		100		/* .. some user interfaces are in "ticks" */
 #define CLOCKS_PER_SEC	(USER_HZ)	/* like times() */
 #endif
diff --git a/include/asm-h8300/param.h b/include/asm-h8300/param.h
index c25806ed1fb3..04f64f100379 100644
--- a/include/asm-h8300/param.h
+++ b/include/asm-h8300/param.h
@@ -3,7 +3,7 @@
 
 
 #ifndef HZ
-#define HZ 100
+#define HZ CONFIG_HZ
 #endif
 
 #ifdef __KERNEL__
diff --git a/include/asm-m32r/param.h b/include/asm-m32r/param.h
index 3e14026e39cd..94c770196048 100644
--- a/include/asm-m32r/param.h
+++ b/include/asm-m32r/param.h
@@ -2,7 +2,7 @@
 #define _ASM_M32R_PARAM_H
 
 #ifdef __KERNEL__
-# define HZ		100		/* Internal kernel timer frequency */
+# define HZ		CONFIG_HZ	/* Internal kernel timer frequency */
 # define USER_HZ	100		/* .. some user interfaces are in "ticks" */
 # define CLOCKS_PER_SEC	(USER_HZ)	/* like times() */
 #endif
diff --git a/include/asm-m68k/param.h b/include/asm-m68k/param.h
index 60f409d81658..536a27888358 100644
--- a/include/asm-m68k/param.h
+++ b/include/asm-m68k/param.h
@@ -2,7 +2,7 @@
 #define _M68K_PARAM_H
 
 #ifdef __KERNEL__
-# define HZ		100		/* Internal kernel timer frequency */
+# define HZ		CONFIG_HZ	/* Internal kernel timer frequency */
 # define USER_HZ	100		/* .. some user interfaces are in "ticks" */
 # define CLOCKS_PER_SEC	(USER_HZ)	/* like times() */
 #endif
diff --git a/include/asm-m68knommu/param.h b/include/asm-m68knommu/param.h
index 4c9904d6512e..96c451018324 100644
--- a/include/asm-m68knommu/param.h
+++ b/include/asm-m68knommu/param.h
@@ -1,13 +1,7 @@
 #ifndef _M68KNOMMU_PARAM_H
 #define _M68KNOMMU_PARAM_H
 
-
-#if defined(CONFIG_CLEOPATRA)
-#define	HZ 1000
-#endif
-#ifndef HZ
-#define	HZ 100
-#endif
+#define HZ CONFIG_HZ
 
 #ifdef __KERNEL__
 #define	USER_HZ		HZ
diff --git a/include/asm-sparc/param.h b/include/asm-sparc/param.h
index beaf02d364f2..86ba59af9d2c 100644
--- a/include/asm-sparc/param.h
+++ b/include/asm-sparc/param.h
@@ -3,7 +3,7 @@
 #define _ASMSPARC_PARAM_H
 
 #ifdef __KERNEL__
-# define HZ		100	/* Internal kernel timer frequency */
+# define HZ		CONFIG_HZ	/* Internal kernel timer frequency */
 # define USER_HZ	100	/* .. some user interfaces are in "ticks" */
 # define CLOCKS_PER_SEC (USER_HZ)
 #endif
diff --git a/include/asm-v850/anna.h b/include/asm-v850/anna.h
index 3be77d5ecfce..cd5eaee103b0 100644
--- a/include/asm-v850/anna.h
+++ b/include/asm-v850/anna.h
@@ -134,10 +134,4 @@ extern void anna_uart_pre_configure (unsigned chan,
 #define V850E_TIMER_D_TMCD_CS_MIN	1 /* min 2^1 divider */
 
 
-/* For <asm/param.h> */
-#ifndef HZ
-#define HZ	100
-#endif
-
-
 #endif /* __V850_ANNA_H__ */
diff --git a/include/asm-v850/as85ep1.h b/include/asm-v850/as85ep1.h
index 659bc910ffd7..5a5ca9073d09 100644
--- a/include/asm-v850/as85ep1.h
+++ b/include/asm-v850/as85ep1.h
@@ -149,10 +149,4 @@ extern void as85ep1_uart_pre_configure (unsigned chan,
 #define V850E_TIMER_D_TMCD_CS_MIN	2 /* min 2^2 divider */
 
 
-/* For <asm/param.h> */
-#ifndef HZ
-#define HZ	100
-#endif
-
-
 #endif /* __V850_AS85EP1_H__ */
diff --git a/include/asm-v850/fpga85e2c.h b/include/asm-v850/fpga85e2c.h
index d32f04504b13..23aae666c718 100644
--- a/include/asm-v850/fpga85e2c.h
+++ b/include/asm-v850/fpga85e2c.h
@@ -79,10 +79,4 @@ extern char _r0_ram;
 #endif
 
 
-/* For <asm/param.h> */
-#ifndef HZ
-#define HZ			122 /* actually, 8.192ms ticks =~ 122.07 */
-#endif
-
-
 #endif /* __V850_FPGA85E2C_H__ */
diff --git a/include/asm-v850/param.h b/include/asm-v850/param.h
index 3c65bd573782..281832690290 100644
--- a/include/asm-v850/param.h
+++ b/include/asm-v850/param.h
@@ -23,8 +23,7 @@
 #define MAXHOSTNAMELEN	64	/* max length of hostname */
 
 #ifdef __KERNEL__
-#include <asm/machdep.h>	/* For HZ */
-
+# define HZ		CONFIG_HZ
 # define USER_HZ	100
 # define CLOCKS_PER_SEC	USER_HZ
 #endif
diff --git a/include/asm-v850/rte_cb.h b/include/asm-v850/rte_cb.h
index e85d261b79bf..db9879f00aa7 100644
--- a/include/asm-v850/rte_cb.h
+++ b/include/asm-v850/rte_cb.h
@@ -69,12 +69,6 @@
 #endif /* CONFIG_RTE_MB_A_PCI */
 
 
-/* For <asm/param.h> */
-#ifndef HZ
-#define HZ	100
-#endif
-
-
 #ifndef __ASSEMBLY__
 extern void rte_cb_early_init (void);
 extern void rte_cb_init_irqs (void);
diff --git a/include/asm-v850/sim.h b/include/asm-v850/sim.h
index 10236abbe9be..026932d476cd 100644
--- a/include/asm-v850/sim.h
+++ b/include/asm-v850/sim.h
@@ -40,11 +40,6 @@
 #define R0_RAM_ADDR		0xFFFFF000
 
 
-/* For <asm/param.h> */
-#ifndef HZ
-#define HZ			24	/* Minimum supported frequency.  */
-#endif
-
 /* For <asm/irq.h> */
 #define NUM_CPU_IRQS		6
 
diff --git a/include/asm-v850/sim85e2.h b/include/asm-v850/sim85e2.h
index 17dd4fa318e6..8b4d6974066c 100644
--- a/include/asm-v850/sim85e2.h
+++ b/include/asm-v850/sim85e2.h
@@ -66,10 +66,4 @@
 #define R0_RAM_ADDR		0xFFFFE000
 
 
-/* For <asm/param.h> */
-#ifndef HZ
-#define HZ			24	/* Minimum supported frequency.  */
-#endif
-
-
 #endif /* __V850_SIM85E2_H__ */
diff --git a/include/asm-xtensa/param.h b/include/asm-xtensa/param.h
index ce3a336cad07..82ad34d92d35 100644
--- a/include/asm-xtensa/param.h
+++ b/include/asm-xtensa/param.h
@@ -12,7 +12,7 @@
 #define _XTENSA_PARAM_H
 
 #ifdef __KERNEL__
-# define HZ		100		/* internal timer frequency */
+# define HZ		CONFIG_HZ	/* internal timer frequency */
 # define USER_HZ	100		/* for user interfaces in "ticks" */
 # define CLOCKS_PER_SEC (USER_HZ)	/* frequnzy at which times() counts */
 #endif